GENERAL-IPTMC -PVIP 26-27 additional EI work-Electrical maintenance work for childrenspark near PVIP IB at Bhoothathankettu-General Electrical Work

1.10.1:Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group A

90.3.20.3:Supply & installation of light fittings on TW round block Supply, conveyance installation testing and commissioning the light fittings of following types made of CRCA with 0.5mm thickness complete with all accessories and lamps etc. directly on wall or ceiling with PVC round block neatly painted to suit the fitting and giving connection with required length of 16/0.20mm 3 core copper conductor flex wire conforming to relevant ISS and giving connections as required.1200 mm 1X20W LED Lamp with box type fixture

1.34:Supplying and fixing brass batten/ angle holder including connection etc. as required.

OD148243/2026-2027:Supply and providing the normal size 9w led bulb in the existing fittings as required

90.15.4.1:Supply Conveyance, installation, testing and commissioning of 20W LED street light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing,acrylic cover complete with THD Less than10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer)

90.4.5.4:Supply, Installation, testing and commissioning of ceiling fan of following sizes including wiring the down rods of standard length (up to 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required. 1200mm sweep - ceiling fan complete with service value minimum 4.0(cub meter/minute/Watt), Air delivery minimum 210(cubic meter/minute), Copper winding suitable for 230V/240V single phase AC supply

OD59782/2026-2027:Supply and installation, testing and commissioning of Philips BGP200 LED26 CW PSU GR CPC 10KV SPD provisioned inside the liminaire, Uniscape LED Post Top/equvalent with Efficacy> 100 lm/W, Power 26w, 3000K, IP65,IK07, Al. Pressure Die-cast spigot, High Voltage / Low Voltage cut off driver, top luminaire having clear toughened glass. Suitable for mounting on 50/60mm OD pipe. Cable entries for through-wiring of mains supply cable Integral constant current power supply CRI with LED driver and suitable for operating on 240V, 50Hz single phase ac supply. (Philips make with 5 Year warranty)

OD74224/2026-2027: Supply and insatllation of cable junction boxes having features like Shockproof and rustproof Rotproof and termite resistant material and Cable entry from bottom and/or sides100% weatherproof Pole mounting arrangement Tamper proof Pilferage proof Restricts unauthorised tapping Maintenance-free Fire retardant ? Class FV-0 as per IS:11731 Part-II or V-0 as per UL-94 High heat distortion temperature (200°C as per IS:10192) Cable junction boxes - Model GSJB 1414 dimension 140*140*95mm. With 32 A, 2 Way neutral links mounted on DMC/SMC base.

90.15.4.5:Supply Conveyance, installation, testing and commissioning of 40W LED Flood light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing, acrylic cover complete with THD less than10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer)