SPECIAL REPAIRS TO COLLINS BLOCK AT IMA DEHRADUN

Amount

Taking down cement plaster on brick or stone walling built in cement mortar including raking out joints hacking for key scrubbing down etc using mechanical means including removal outside the IMA premises complete all as specified.

M&L for Complete removal of existing treatment by Scrapping of existing treatment on wall using mechanical means complete all as directed.

M&L for 5mm thick ready mix plaster on brick or concrete surfaces on ceiling, fascia roof projection etc as per manufacturers specification, surface finished even & fair, upto the height of 7.5m complete all as specified and directed. Make : ACC (Suraksha ) / Ultratech (Readyplast)/Birla (Aerocom)/Unicrets

M&L for 15mm thick External ready mix plaster on brick or concrete surfaces including providing & mixing water proofing compound as per manufacturers specifications, surface finished even & fair, complete all as specified and directed Make : ACC (Suraksha ) /Ultratech (Readyplast) / Birla (Aerocom)/Unicrets

M&L for 10mm thick Internal ready mix plaster on brick or concrete surface including providing & mixing water proofing compound as per manufacturers specifications, surface finished even & fair, complete all as specified and directed. Make : ACC (suraksha) /Ultratech(Readyplast)/Birla (Aerocom) / Unicrets

M&L for Providing and applying waterproof putty of 1 mm thickness over plastered surfaces on wall to prepare the surface even and smooth including rubbing the surfaces till achieve the smooth surface complete all as specified and directed

M&L for applying Two coats of 100% Premium acrylic emulsion paint on walls , facia , chajjas etc. having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 Sqm over new /Old surfaces ceiling and wall all as per manufacturer’s instructions and directed Note :- Work shall be carried out from authorised applicator of manufacturer only

M&L for Chalk whiting on plastered, Priming plastered and other surfaces prepare to receive distempering on wall all as per manufacturer’s instructions and directed

M&L for two or more coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specifications, by mechanical means complete all as per manufacturers instructions and as directed

M & L for two coat of white wash on old plastered surface of wall including preparation of surfaces, complete all as specified.

Taking down chowkats or frames with shutters (without taking off shutter from frame) area n'exc 1.5 Sqm complete all as specified and directed

Taking down chowkats or frames with shutters (without taking off shutter from frame) area exceeding 1.5 sqm but n.exc 4.00 sqm complete all as specified and directed.

Taking down and easing shutters to ensure smooth closing / opening including tightening of hinges, adjustement of tower bolts, sliding bolt and refixing in same opening etc area not exc 1 Sqm each complete all as specified and directed.

Taking down and easing of door shutters to ensure smooth closing/opening including tightening of hinges, adjustement of tower bolts, sliding bolt and refixing in same opening etc area exc 1 Sqm but not exc 2 Sqm each complete all as specified and directed.

Taking down and easing of door shutters to ensure smooth closing/opening including tightening of hinges, adjustement of tower bolts, sliding bolt and refixing in same opening etc area exc 2 Sqm each complete all as specified and directed.

Taking down shutters of any description n exc 1sqm each complete all as specified and directed.

Taking down shutters of any description exc 1 sqm and n exc 2 sqm complete all as specified and directed.

S&F Pieces ( 1st class hard wood TEAK) , small Let in for making good where hinges, sliding doors, handels ,etc . Have been removed from chowkhats or frames , joinery , etc incl painting or oiling to match , if required Mesicellaneous repairs complete all as specified and directed.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S & F 40mm thick 1st class H.W teak wood factory made plain framed and arch shape on top paneled shutters (any number of decorative panels) with lock rail and panel of 15mm thick 1st class teak wood size of rail and stiles as per IS 1003 (part -I) kiln seasoned and chemical pressure treated complete all as specified and directed.

S & F 40mm thick 1st class H.W teak wood decorative plain framed glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc. (with sash bars), divided in to square, edges of framing plain, chamfered or rounded ,fitted with cut and mitered bead for securing glasses etc, window ventilators etc are provided with stiles and rails as specified in SSR Part-I, 1991, Section- 8, Clause 8.20 (b), complete all as specified and directed. Shutter shall be of factory made complete all as specified and directed.

S & F Ist Class hard teak wood, Plain and semi circular at top chowkats & frame wrought rounded or chamfered put together with glue pinned joints and fixed complete all as specified and directed

S&F 18-19 mm thick prelaminated colour WPC sheet for cabinet shutter and frame & fixed at site colour as approved by Engr-in- Charge complete all as specified and directed.

S&F auto closing hinges 35mm of 0 crank openable at 110 degree for cabinet shutter fixed in repair complete all as specified and directed.

S&F Stainless steel handle 125mm size for cabinet shutter fixed in repair complete all as specified and directed.

BLANK

M&L for 25mm 2nd class hard wood planed on side with but joints in ceilling boarding , supplied & fixed with nails in any situtation (except flooring and skirting) complete all as specified and directed.

S&F Factory made single extruded WPC (Wood Polymer Composite ) soild door/ window Ceostory windows & other frame / chowkhat double patam of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Supension Grade) , calcium carbonate and natural fibers (wood powder / rice husk / wheaat husk ) and non toxic additives ( maximum toxicity index of 12 for 100 gms ) fabbricated with miter joints after applying PVC solvent cement and screws with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withrawal strength of 2200 N cum , (Face) & 1100 N (Edge) , minimum compressive srength of 58 N/mm², modules of elasticty 900 N/ mm² and resitance to spread of flame of class A category with property of being termite / borer proof , water / moisture proof and fire retardant. and fixied in position with MS hold fast/ lugs / SS dash fasteners of required dia and length complete as per direction of Engineer-In-Charge.(M.S. hold fast/ lugs or SS dash fasteners be inclusive in the quoted rates) . Note : For WPC solid door/ window frames , minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable . Variation in profile dimension on plus side shall be accepetable but no extra payment on this account shall be made.

S&F factory made single extruded WPC (wood polymer Composite ) soild decorative type flush door shutter of size 30 mm thick comprising of virgin polymer of K value 58-60 (suspension Grade ), calcium carbonate and natural fiber (wood powder/ rice husk / wheat husk) and non toxic additives ( maximaum toxicity index of 12 for 100 gms ) having minimum density of 650 kg/cum and screw whithrawal strenght of 1800 N (Face ) & 900 N (Edge ) , minimum compressive strength 50 N/mm² , modulus of elasticity 850 N/mm² and resistance to spread of falme of Class A category with property of being termite /borer proof , water/moisture proof and fire retardant . WPC to be laminated with PVC foil of minimum 14 microns thic of approved desing pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel but hinges of required size with necessary full body threaded star headed counter sunk S.S screws., all as per direction of Engneer-In -Charge . ( Note : Stainless steel but hinges and necessary S.S srews shall be inclusive in the quoted rates)

M&L for PCC 1:3:6 type C-1 using 20mm graded crushed stone aggregate as in bed blocks etc for embededding hold fasts complete all as specified and directed.

M & L for precast cement concrete 1:2:4 type B1 (using 20mm graded crushed stone aggregate) in cover slabs , shelves and similar articles with plain faces Gulli traps and manhole covers. Complete all as specified and directed.

Hacking out old broken glass pane (any size thickness and description) from wooden frames / steel frames complete all as specified.

S & F 3 mm thick sheet glass ordinary quality glazing in square nexc. 0.5 sqm in each pane fixed with wooden moulding complete all as specified and directed.

M&L for two or more coat of french polishing on wooden surface of any discription width or girth including cleaning and preparing the surface including a coat of wood filler on new work to achieve the required finish complete all as specified and directed.

M&L for two or more coat of french polishing on wooden surface of any discription width or girth including cleaning and preparing the surface including a coat of wood filler on old work incl complete removal of exiting paint complete all as specified and directed.

S&F floor door stopper 140mm of brass body and tougue with hard steel and spring complete all as specified and directed.

S & F Ist class teak hardwood moulding exc 6 sqcm & n exc 13 sqcm in cornices picture rails and the like complete all as specified and directed.

S & F Fancy and decorative type 300mm long brass barrel, semi barrel and skeleton tower flush bolts type 2 and fixed flush complete all as specified and directed.

S & F Fancy and decorative type 150mm long brass barrel, semi barrel and skeleton tower flush bolts type 2 and fixed flush complete all as specified and directed.

S & F 100mm butt hinges, cast brass with mild steel hing pin bright polished and fixed type B-11 complete all as specified and directed.

S&F 75 mm butt hinges, cast brass with mild steel hing pin bright polished and fixed type B-11 complete all as specified and directed.

S & F Fancy and decorative type 300mm long brass sliding door bolt with sand or die cast brass hasp staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and directed.

S&F Stainless steel grating for nahani trap 100mm dia complete all as specified and directed.

S & F Fancy type and decorative 150mm long extruded brass handles fabricated type polished complete all as specified and directed.

Dismantling floor, hearth or wall tiling /kota/udaipur marble/ granite stone tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and removing the demolished material outside the IMA premises complete all as specified and directed.

M&L for brick work using sub class "B" brick work straght or curvd on plan exc 6 mtr mean radius built in CM 1:4 (old size brick) including demolation of brick work complete all as specified and directed.

M&L for 25 mm thick cement concrete type B-1 , 1:2:4 ( 20mm graded crushed stone aggregate as in sub base complete all as specified and directed.

M & L for Vitrified glazed tiles ( light shade), / designer tiles 10 mm thick (Square/rectangular ) polished, area of each tiles not exceeding 0.36 Sqm, laid in floors etc set and jointed using 5-6 mm thick layer of tile adhesive (using proper tools) of JK cement, ACC / Unicrete over existing flooring including surface preparation and pointed in tile grout to match the shade of tiles all as specified and directed by manufacturer and Engineer-in-Charge

M & L for full body Vitrified dark shade designer tiles 9-10 mm thick (Square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc set and jointed using 5-6 mm thick layer of tile adhesive (using proper tools) of JK cement or equivalent over existing flooring including surface preparation and pointed in tile grout to match the shade of tiles all as specified and directed by manufacturer and Engineer-in-Charge

All as per item above but on vertical surfaces such as dado, skirting etc over and including 10 mm thick cement plaster finished even and rough to receive tiles in Cement mortar (1:4) complete all as specified and directed.

M&L for non skid ceramic coloured tiles area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm & 7 to 8 mm thick in floor set and jointed in neat cement slurry and pointed in tile grout to match the shade of tiles with & including screed bed or beading layer of mortar 15mm thick in cement mortar (1:6) for laying floor finishes , complete all as specified and directed

M&L for coloured glazed designer tiles of size 300x450x6 - 7 mm thick fixed with neat cement slurry in vertical surface to wall set and jointed in neat cement slurry and pointed in same color tile grout to match over and including 10mm thick rendering in Cement Mortar 1:4, all as specified and directed

S&F stainless steel curtain rod, 32 mm dia,decorative including S S brackets, decorative finials at both ends complete all as specified including dismantling of existing rod.etc complete all as specified and directed.

M&L for Cutting chases, pinning in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth complete all as specified and directed.

S&F medium grade steel water tubing, 15 mm bore galvanised with all fittings and fixed complete to walls or layed in floors including taking down of existing tubing and connections all as specified and directed

S&F medium grade steel water tubing, 20 mm bore galvanised with all fittings and fixed complete to walls or layed in floors including taking down of existing tubing and connections complete all as specified and directed.

Demolition and breaking up drain pipes, PVC pipes ,CI pipes (Salt glazed stoneware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed.

S&F Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) incl 5 ltr cast iron automatic flushing cirstren incl CP waste cupling complete all as specified and directed.

BLANK

S&F PVC (SWR), junction single, (Single T) 110 mm equal or unequal complete all as specified and directed.

BLANK

BLANK

S & F in repair Cast iron Nahani trap of 100mm dia complete all as specified and directed.

BLANK

S & F in repair 110mm dia PVC (SWR) sanitary short connection socket to fit WC outlet, complete all as specified and directed.

S & F in repairs PVC (SWR) bend 110 mm any radius complete all as specified and directed.

S & F in repairs PVC (SWR) bend 75 mm any radius complete all as specified and directed.

M & L for 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches ,or in floor fixed in repair complete all as specified and directed.

All as per Item No 68 above but 75 mm dia on wall complete all as specified and directed.

Roughening surface of old concrete floor by picking , sweeping clean and washing down with water to remove dust,etc complete all as specified and directed.

S & F in repair vitreous China wash down water closet pan floor mounted single piece ( cascade) ceramic white including flushing cictren , plastic water closet seat , white colour pattren with flat bottom and cover complete all as specified and directed.

S&F Vitreous china white Table Top Wash hand basin Size 450 x 450 x 170 mm ,one number brass CP waste coupling ,32mm dia , PVC waste pipe with connector fixed in repair complete all as specified and directed .

M&L for 16 - 18mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platforms, shelves in cupboard,handwash places and like including necessary cutting and grooving to walls and making good by pointing in cement mortar (1:2) using admixture of pigment to match with shade of granite over and including cement screed bed Cement Mortar (1:6) 15 mm thick colour of granite as approved complete all as specified and directed.

M & L for Granite stone any decripition providing edges moulding to 16-18mm thick stone of counters vanities etc . including machine polishing to edge to give high gloss finish etc complete all as specified and directed.

S&F Hot and cold mixer fancy type single or double legged cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends iron pipe suitable for 15mm bore pipe fixed to counter top wash hand basin complete all as specified.

M&L for provision at point of contact of wood work of chemical emulsion (in oil or kerosene based solution ) @ 0.5 ltrs /hole by drilling hole at dowanrard angle of 45 digree at 150mm centre to centre and sealing the same complete all as specified and directed.

M&L treating of soil under existing floors using emulsion @ one liters per hole , 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement : 2 coarse send ) to match the existing floors complete all as specified and directed.

S&F PVC connection , reinforced 450mm long 15mm in size with brass check nut and PVC washers at both ends complete all as specified and directed.

S&F 15mm Angle stop valves, fancy type chromium plated, screwed down, high pressure with crutch or butter fly handle screwed at two right angles ends for both iron pipe or for unions and fixed in repairs complete all as specified and directed.

S&F Bib tap cast copper alloy , chromium plated suitable for 15mm bore iron pipe with long body fancy type with wall flange complete fixed in repairs complete all as specified and directed.

S&F in repair 15mm brass CP Mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F brass chromium plated shower rose of 150 mm squre size, with or without swivel joints including fixing to steel pipe or union fixed in repairs complete all as specified and directed.

S&F Brass chhromium plated tubular tower rail 20mm dia , D type, 60cm long between flanges fixed in repair complete all as specified and directed.

S&F brass chromimum plated Towel ring fixed with and including Chromium plated brass screws and wooden / plastic cleats ( Minimum weight 90 gms) complete fixed in repair complete all as specified and directed.

S&F Brass chhromium plated tubular Towel Rack with Lower Hanger (Stainless Steel) with hook fixed in repair complete all as specified and directed.

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

S&F fixed in repair Toilet paper holder with flat recessed type stainless steel complete all as specified and directed.

S&F fixed in repair Soap dish stainless steel chromium plated with brass screws and rawl plug fixed in repair complete all as specified and directed.

S&F Sheet glass corner shelf of PTMT fixed with and incl of 5.5 mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railling fixed in repair with brass screws and rawl plug complete all as specified and directed.

M&L for PVC bath room cabinet of size 535 x 483 mm x 110 mm with mirror fixed in repairs complete all as specified and directed. Make Jaquar / Cera / Hindware/ Kajaria

S & F in repair for 0.75 mtr X 0.90 mtr bevelled edge looking mirror of any size 5.5mm thick fixed with plugs with chromium plated brass screw and cup washer complete all as specified and directed.

S&F 2000 liter rotational moulded polyethylene water storage tank triple layered (cylinderical vertical with closed top )hoisted and fixed in position including dismantling of existing tank of any description complete all as sepcified and ISI Marked complete all as specified and directed.

Demolition of cement concrete in ground floor and paving not exc 15cm thickness (below or above ground level) and removing surplus spoil out of Defence Land complete all as specified and directed

M&L for 75 mm thick PCC (1;3:6) type C-1 as in plinth protection/ Path finished even and smooth without using extra cement complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 using 40 mm graded crushed stone aggt as in sub base filling and mass concrete complete finished evenand fair complete all as specified and directed.

M & L for chequered heavy duty glossy finish cement concrete tiles 30cm X 30cm X 25 mm thick, set, jointed & pointed in neat cement slurry in floor with grey cement mixed with colour pigments complete all as specified and directed.

M & L for 20 mm thick screed bed or bedding layer of mortar in 1:6 for laying of flooring complete all as specified and directed.

S & F MS framed work as in doors or gates of angle or other section with gusset plates , rails, brackets etc complete drilled for fixing of steel sheeting or others covering. Doors , etc to be prepared for hanging or sliding with and incl either hooks and hinges or steel hanging door fitting and hanging also fastening and fixing complete all as specified and directed.

S & F Mild steel sheet ,plain sheet 1.00 mm thick in , steel gate and similar work , cut to size , holes punched : including round headed screws, clout nails or rivits and fixing to wood or steel framing with plain 40mm lap joint with riveted or welded seams , including bending or turning up, mitred angles etc. as required complete all as specified and directed.

M & L for Prepration of new steel surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M & L for Prepration of old steel surface of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

S&F MS angle/TEE/Hollow/tubular section as in main and cross beams, hips and jack rafter, purlins where connected to common rafters and etc. all as directed by engr- incharge confoming to Fe-410- W(Gde- E-250) quality- B complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coated GI based Plain steel sheet 0.50mm thick any colour having tensile strength of 550 Mpa and 150 GSM as in roof covering/ridge/cladding to wall fixed with self tapping screws complete all as specified and directed. Make- Tata,(Blue scope/Jindal India Ltd (Neu colour +)/JSW Steel (colour on +)

S&F pre-painted galvalume aluminium zinc coated GI based tile profile corrugated steel sheet 0.50mm thick any colour having tensile strength of 550 Mpa and 150 GSM as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed. Make- Tata (Blue scope/ Jindal India Ltd (Neu colour +)/ JSW Steel (colour on +)

S&F Plain , black , 0.63 mm mild steel sheeting , in ridges , hips, valley gutters , drips and straight flashings ( length and girth fixed) complete all as specified and directed. Make- Tata (Blue scope/ Jindal India Ltd (Neu colour +) / JSW Steel (colour on +)

M & L for Chipping off existing loose, damaged concrete from RCC members of all affected RCC Columns, beams, slabs and chajjas on external and internal facades etc beyond main r/f.(if required), carefully with chisel and hammer. Providing and applying Rust passivator to existing r/f bars including wire brushing of r/f, cleaning, washing of concrete etc complete all as specified and directed.

M & L for TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns/beams, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for Carry out application of 'Bi-polar migratory corrosion inhibitor' of approved make on concrete surface through pores of concrete, inhibiting the corrosion and de-passivating the Electro-chemical reaction complete all as specified and directed.

M & L for Providing and applying effective polymer bonding coat of approved make between old and new concrete after cleaning, drying & applying as per manufacturer's instruction and consultant instructions complete all as specified and directed.

M & L for Repairing concrete areas using non shrink, free flow, corrosion inhibiting microconcrete. Rebuilding the section of damaged RCC elements to its original size or as per consultants recommandations by providing and casting with microconcrete of grade M40 all lead lift, mixing, placing, levelling the surface complete as per manufacturer's specification complete all as specified and directed.

M & L for Cutting channels, grooves and filled with mortar admixed with multifunctional acrylic polymer emulsion in the ratio of 1:2:3 or rebates n exc 15cm girth and trimming surface with or without reinforcement all as per manufacturer's direction complete all as specified and directed.

M & L for All honey comb areas and construction joints to be grouted with non-shrink cementitious grout of approved make @ 1% by weight of cement @0.75m c/c and nozzle to be sealed with fast setting nonshrink water stopping mortar (Only in required area) all as per manufacturer's direction complete all as specified and directed.

M & L for brick work in half brick thick wall using sub class "B' bricks in Cement Mortar (1:4) complete all as specified and directed.

Demolition of brick work built in cement mortar as in drain, manhole, septic tank and soak well complete all as specified and directed.

S & F Cast Iron Soil, waste and vent pipes, in any length with or without ears, with cement joints, fixed to wall 100 mm bore complete all as specified and directed

S & F Stack clamps out of 50x5 mm flat iron and 16 mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roof 100 mm bore of pipe complete all as specified and directed

S & F Cast Iron Branch pieces, single tee (equal or unequal), ordinary or inverted ( spigot or socket type) or with parallel branches 100 mm bore of pipe complete all as specified and directed.

S&F Cast Iron cowl 100mm bore complete all as specified and directed.

M & L for Cast Iron gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

S&F 20mm ball valve brass high pressure, with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surface of walls, floors, etc. complete all as specified and directed.

Taking down existing exhaust fan of any capacity and make serviceable by replacing the unsv parts Such as capacitor, Bearing/Bush and fan winding etc including preparation of old painted surface body and blades of exhust fan of any capacity ,cleaning foreign material ,filling cavaties atc and painting with one coat of synthetic enammeled paint by spray painting and marking MES No. with paint and kept in safe custody and refixing at site after compltion of wiring work complete all as specified and directed.

Taking down water Heater of any capacity and make serviceable by replacing unsv part Such as Heating element, Thermostat, Indicator lamp and Assembly etc including descaling the inner container with cleaning solution including preparation of old painted surface body of geyser of any capacity ,cleaning foreign material ,filling cavaties atc and painting with one coat of synthetic enammeled paint by spray painting and marking MES No. with paint and kept in safe custody and refixing at site after compltion of wiring work complete all as specified and directed.

Taking down old U/S main switches, Sheet metal enclosures, DB including MCCBs, MCBs etc including making good to the disturbed surface of wall complete all as specified and directed.

Taking down old unsv Tube Light, Lamp,Security light of any size and capacity complete all as specified and directed.

Taking down existing ceiling fan of any capacity and make serviceable by replacing unsv parts Such as Bearing /Bush, capacitors and fan winding etc and preparation of old painted surface body and blades of ceiling fan of any capacity ,cleaning foreign material ,filling cavaties atc and painting with one coat of synthetic enammeled paint by spray painting and marking MES No. with paint and kept in safe custody and refixing at site after compltion of bldg work complete all as specified and directed.

Taking down carefully submain wiring including all accessories fittings fixtures etc and making good to the disturbed surfaces all as directed and as specified in any type and size complete all as specified and directed.

Material and labour for point wiring with PVC insulated and unsheathed electric cable 1100 volts grade single core FRLSH having multi stranded copper conductor of 1.5 sq mm nominal cross sectional area drawn in existing conduit with all fitting and fixing accessories and 1.5 sq mm PVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor, connected to earth dolly by providing suitable lugs with & including modular metal flush box and modular cover and frame for mounting modular switch, regulators etc complete all as specified and directed. Note (i) The quoted rates shall be deemed to be inclusive for making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface. (ii) Point wiring & earth wire shall be connected to each & every sunken box and body of the fitting /Fan with proper thimble.

One light point controlled by one, one way switch 5 Amps

One fan point/ exhaust fan point controlled by one, one way switch 5 Amps

One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board.

One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.

All as per item No.120 above but with stranded copper conductor 2.5 Sq mm (nominal area), two single core, PVC insulated cable 1100 Volt grade ISI-694 marked for 3 pin, 15 Amp socket outlet, independent, including PVC insulated stranded copper conductor 2.5 Sqmm (nominal area) single core as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed.

All as per item No.120 above but with stranded copper conductor 4 Sq mm (nominal area), two single core, PVC insulated cable 1100 Volt grade ISI-694 marked for 3 pin, 15 Amp socket outlet, independent, including PVC insulated stranded copper conductor 4 Sqmm (nominal area) single core as earth continuity conductor to common earth and connecting to earth dolly. complete all as specified and directed.

Material and labour for point wiring with PVC insulated and unsheathed electric cable 1100 volts grade single core FRLSH having multi stranded copper conductor of 1.5 sq mm nominal cross sectional area drawn in nincluding non rigid PVC Conduit concealed in wall with all fitting and fixing accessories and 1.5 sq mm PVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor, connected to earth dolly by providing suitable lugs with & including modular metal flush box of required size factory made for mounting Modular switch, regulators etc with and including Modular cover and frame , ISI marked, for the following. Note (i) The quoted rates shall be deemed to be inclusive for making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface. (ii) Point wiring & earth wire shall be connected to each & every sunken box and body of the fitting /Fan with proper thimble.

One light point controlled by one, one way switch 5 Amps

One ceiling fan / exhaust fan point controlled by one, one way switch 5 Amps

One bell point controlled by one, bell switch 5 Amps

All as per item No. 127 above but with stranded copper conductor 2.5 Sq mm (nominal area), two single core, PVC insulated cable 1100 Volt grade ISI-694 marked for 3 pin, 15 Amp socket outlet, independent, including PVC insulated stranded copper conductor 2.5 Sqmm (nominal area) single core as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed.

Supply and fix modular switch 1 way 6/10 A, 1 Module complete all as specified and directed.

Supply and fix modular switch 1 way 16/20A, 1 Module with indicator lamp complete all as specified and directed.

Supply and fix modular socket 6/10A, 2/3 pin combined 2 Module complete all as specified and directed.

Supply and fix modular socket 16/20A, 2/3 pin combined 2 Module complete all as specified and directed.

Supply and fix modular fan regulators step type 2 module 120W complete all as specified and directed.

Supply and fix modular bell push 6A, 1 Module complete all as specified and directed.

Material and labour for ceiling rose, 63.5 mm dia, ISI marked, three terminal of polycarbonate/isolated body complete all as specified and directed.

Suply and fix for Bell Electric Ding dong type suitable for operation on 230 volt 50 HZ A C supply complete all as specified and directed.

Supply and fix lamp holder PVC /Polycarpebonated type with back plate suitable for batten fittings complete all as specified and directed.

S & F LED lamp 12 W suitable for Angle holder pendant fittings complete all as specified and directed.

Supply and Fixing LED Batten light fittings 4 feet on walls with brackets including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose all as conforming to the following parameters : - (i) System Lumens: - System lumen not less than 2000 lm (ii) Housing: - High pressure die cast aluminium. (iii) IP Rating: - IP 20 (v) Mounting: - Wall Mounted (vi) Finish: - Polycarbonated diffuser (vii) Lamp: - High bright LED (viii) System Efficacy (lm/W) of the luminaries: - Not less than 100 Lm / watt. (ix) Colour temperature (K): - Not less than 5700( Cool day Light ) (x) Color Rendering Index (CRI) & SDC: - Not less than 80, <5 (xi) Life: - upto 3 YEAR WARRANTY ON COMPANY LETTERHEAD (xii) Optics: - Fully Diffused (xiii) Control gear: - inbuilt electronic driver, PF not less than 0.90 and THD less than 10 % with operating voltage 140-270V AC, 50 Hz (xiv) Surge protection: - inbuilt surge protection minimum 3KV (xv) Heat Shink: - As per OEM's design (xvi) Bidder has to compulsorily submit the data sheets conforming of technical spscifications.

Supply and Fixing LED Batten light fittings 2 Feet on walls with brackets including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose all as conforming to the following parameters : - (i) System Lumens: - System lumen not less than 1200 lm (ii) Housing: - High pressure die cast aluminium. (iii) IP Rating: - IP 20 (v) Mounting: - Wall Mounted (vi) Finish: - Polycarbonated diffuser (vii) Lamp: - High bright LED (viii) System Efficacy (lm/W) of the luminaries: - Not less than 100 lm/watt. (ix) Colour temperature (K): - Not less than 5700(COOL DAY LIGHT) (x) Color Rendering Index (CRI): - Not less than 80 (xi) Life: - Not less than 20000 Hrs of operation (xii) Optics: - Fully Diffused (xiii) Control gear: - inbuilt electronic driver, PF not less than 0.90 and THD less than 20 % with operating voltage 140-270V AC, 50 Hz (xiv) Surge protection: - inbuilt surge protection minimum 2KV (xv) Heat Shink: - As per OEM's design (xvi) Bidder has to compulsorily submit the data sheets report conforming of technical spscifications .

Supply and Fixing LED street/Security light fittings on poles/Wall with mounting brackets of suitable size including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose all as conforming to the following parameters : - (i) Syatem Lumens: -System lumen not less than 2500 Lm (ii) Housing: - Single Piece High pressure die cast aluminium. (iii) IP Rating & IK Rating: - IP 66 & IK07 (iv) Front cover: - Polycarbonated Cover for More protection (v) Mounting: - Suitable for pole mounting with bracket arm 40-50mm dia, Mounting height- 5.50m to 6.50 m from GL. (vi) Finish: - Epoxy powder coated with any additional treatment for smooth and anti corrosive finish. (vii) Lamp: - High bright LED with Lens (viii) System Efficacy (lm/W) of the luminaries: - Not less than 100 Lm / watt. (ix) Colour temperature (K): - Not less than 5700 (x) Color Rendering Index (CRI): - Not less than 70 (xi) Life: - Not less than 50000 Hrs of operation @ Ta 35*C (xii) Optics: - Spread (Beam angle along the driveway) - 120°, Through (Beam angle across the driveway)- 60°, Beam pattarn- Asymmetrical driveway. (xiii) Control gear: - inbuilt electronic driver with 325V Auto Cut off Restart feature & 440V Phase to Phase protection till 8 hour, PF not less than 0.95 and THD less than 10% at full load with operating voltage 140-270V AC, 50 Hz. (xiv) Surge protection: - inbuilt surge protection minimum 4KV. (xv) Heat Shink: - As per OEM's design

Supply and fix Metal finish wall light with maximum bulb wattage 20 watt, base of the lamp should be E27, colour of the fixture is white & silver wsith chrome finish and having rectanguar shape for aesthetic look. dimension of the fixture should be 125 x 150 x 240 mm and connected the same with using PVC sheathed and insulated 3 core flexible 23/0.0076 copper conductor cable including all accessories and fixing arrangement for fixing the light fitting to wall complete all as specified and directed.

Supply and Fixing LED 2x2 Recessed Mounted fittings on armstrong/Geypsum Ceiling including taking down old unsv recess mounted fitting all as conforming to the following parameters: - (i) Syatem Lumens: - System lumen not less than 3600lm (ii) Housing: - Single Piece CRCA body (iii) IP Rating & IK Rating: - IP 20 & IK20 (iv) Front cover: - Polycarbonated Cover for More protection (v) Mounting: - On Armstrong as well as geypsum ceiling. (vi) Finish: - Epoxy powder coated with any additional treatment for smooth and anti corrosive finish. (vii) Lamp: - High bright LED with Lens (viii) System Efficacy (lm/W) of the luminaries: - Not less than 120 lm/watt. (ix) Colour temperature (K): - Not less than 6500( COOL DAY WHITE ) (x) Color Rendering Index (CRI), UGR, SDCM: - Not less than 80, <19, <5 (xi) Life: - Not less than 50000 Hrs of operation @ Ta 35*C (xii) Optics: - Spread (Beam angle along the driveway) - 120°, Through (Beam angle across the driveway)- 60°, Beam pattarn- Asymmetrical driveway. (xiii) Control gear: - inbuilt electronic driver with 325V Auto Cut off Restart feature, PF not less than 0.95 and THD less than 10% at full load with operating voltage 140-270V AC, 50 Hz. (xiv) Surge protection: - inbuilt surge protection minimum 4KV. (xv) Heat Shink: - As per OEM's design

Supply and fix ceiling Fan complete with blades,down rods ,230 volts ,1200 mm sweep ,min air delivery 210 CFM with service value 6.00 BEE ,with Brushless direct current motor (BLDC) Suitable for operatable by electronic fan regulator including taking down old unsv serviceable fan and deposited to the store complete all as specified and directed.

Supply and fix metal body exhaust fan 300 mm sweep, 900 rpm 230 volts 5h Hz, energy saving model single phase copper wound motor, grey in colour complete with blade, box type louvers etc including taking down old unsv serviceable exhaust fan and deposited to the store. complete all as specified and directed.

Supply and fix exhaust Fan ,made of sturdy Engineering plastic complete with louvers shutter,voltage 230volts ,50HZ,RPM 1200,copper winding of sweep 250 including cutting holes on wall and making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface complete all as specified and directed.

S&F Water heater (Geyser) storage type, electric,capacity 25 litres five star rated AC SP 230 volts, 50 Hz, vertical mount type, shockproof and rustproof metal body, stainless steel inner container, high efficiency heating element, autocut thermostate, pressure release safety system,NRV , fire retardent cable with 3 pin plug top, white colour including fixing accessories like fastensers, nuts, washers complete all as specified and directed.

S and F sheet metal enclosure double door type ISI marked MCBs DB SPN(Single pole and neutral) 240V AC 12 way with 200 Amps rated bus bar all as specified and directed

S and F sheet metal enclosure double door type ISI marked MCBs DB SPN(Single pole and neutral) 240V AC 16 way with 200 Amps rated bus bar all as specified and directed

S and F single pole and neutral enclosure with a two pin and earth, plug and socket complete with one single pole MCB 20 Amps all as specified and directed

S and F 240 Volts ,10KA” B” curve miniature circuit breaker (MCB SP) of single pole and current carrying capacity 6 to 32 A in the MCB DB complete with connection testing and commissioning all as specified and directed

S and F 240 Volts ,10KA” B” curve miniature circuit breaker (MCB SPN ) of single pole and neutral current carrying capacity 40 A in the MCB DB complete with connection testing and commissioning all as specified and directed

S and F 240 Volts,10KA” B” curve miniature circuit breaker (MCB SPN ) of single pole and neutral current carrying capacity 63 A in the MCB DB complete with connection testing and commissioning all as specified and directed

S & F Distribution boards epoxy powder coated TP & N (VTPN MCCB DB) 12 Way ,415 Volts ,fabricated from minimum 1.6 mm thick CRCA sheet and fixed/ flush to wall and suitable for universal mounting with 250 Amps fully insulated copper Bus Bar for each phase and 02 neutral shrouded bar ,2 earth bar and cable tie for cable management with reversible door for IP-43 DB,S protection, suitable for fixing FP MCCB 100/125 Amps as incomer complete all as specified and directed. Note: Suitable MCCB and outgoing MCBs will be measured separately under relevant items of this schedule

S & F Distribution boards epoxy powder coated TP & N (VTPN MCCB DB) 4Way,415 Volts, fabricated from minimum 1.6 mm thick CRCA sheet and fixed/ flush to wall and suitable for universal mounting with 250 Amps fully insulated copper Bus Bar for each phase and 02 neutral shrouded bar ,2 earth bar and cable tie for cable management with reversible door for IP-43 DB,S protection, suitable for fixing FP MCCB 100/125 Amps as incomer complete all as specified and directed. Note: Suitable MCCB and outgoing MCBs will be measured separately under relevant items of this schedule.

S & F Distribution boards epoxy powder coated TP & N (VTPN MCCB DB) 8Way,415 Volts fabricated from minimum 1.6 mm thick CRCA sheet and fixed/ flush to wall and suitable for universal mounting with 250 Amps fully insulated copper Bus Bar for each phase and 02 neutral shrouded bar ,2 earth bar and cable tie for cable management with reversible door for IP-43 DB,S protection, suitable for fixing FP MCCB 100/125 Amps as incomer complete all as specified and directed. Note: Suitable MCCB and outgoing MCBs will be measured separately under relevant items of this schedule

S & F MCCB 100 Amps 4 Pole ,415 Volts ,16 KA with thermal magnetic release and adjustable overload setting complete all as specified and directed.

S & F MCCB 63 Amps 4 Pole ,415 Volts ,16 KA with thermal magnetic release and adjustable overload setting complete all as specified and directed.

S & F sub main wiring with 2 run PVC insulated unsheathed FRLSH cable 1100 Volt grade, with multi stranded copper conductor drawing in existing Concealed conduit including one run PVC insulated unsheathed cable with multi stranded copper conductor as a earth continuity and connected upto DB of following sizes 2 x 10 Sqmm + 1 x 10 sqmm ( for power DB ) complete all as specified and directed. Note:Two run of single core PVC cable 10 Sqm, One run of 10 Sqmm earth cable and one run of PVC condiut shall be measured and paid as one unit.

Material and labour for earthing with galvanised steel earth plate electrode 60cmX60cmX 6mm thick burried directly in ground (earth pit not less than2.25 mtr below ground level) with top edge of the plate not less than 1.5 mtr below ground level connected to 4mm thick GI wire by means of nuts,bolts,check nuts & washers of galvanized iron or steel,protected by 15mm bore light grade galvanised iron pipe and connected to main switch board,including all necessary excavation & earth work in hard dense soill including funnel with wire mesh and watering pipe 20 mm bore medium grade galvanised iron pipe with charcoal and common salt in alternate layers of 15 cm thickness all around the GI plate electrode with concrete pit in PCC 1:3:6 type C-1 with cast iron frame including cast iron cover10mm thick hinged to CI frame and 6mm MS rod for handle and necessary testing complete all as shown in electrical plate No 3 of SSR part-I complete all as specified and directed. Note 12 Nos for External ELectrification and 22 Nos for Internal ELectrification.

Supply and fix concealed in wall Rigid non metalic PVC conduit of 25mm dia , inclusive of boxes (junction/terminal)but inclusive of all tees,bend ,elbow reducers, bell mouth tube ends and fixing acessories such as couplers,lock,nut saddles,pipe hooks complete all as specified and directed. ( For for drawing Point wiring cable /Submain cable where conduit is open on wall / conduit got damged in conceale / Blocked /For tele/LAN wire) Note : The rate for cutting and chasing of wall to flush the conduit and making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface shall deemed to be included in the quoted rate .

Taking out old Unsv LT UG cable of any size doing excavation in ground complete all as specified and directed.

Taking down old unsv three phase submain wire of any type from LT panel to MCCB DB complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 120 sq mm 3.5 core Laid in trenches, under road, in culvert, under floor or fixed on wall. complete all as specified and directed.

All as per item No 167 above but of size 95 Sqmm x3.5 Core. complete all as specified and directed.

All as per item No 167 above but of size 70 Sqmm x3.5 Core complete all as specified and directed.

All as per item no 167 above but of size 50 Sqmm x3.5 Core complete all as specified and directed.

All as per item no 167 above but of size 35 Sqmm x3.5 Core complete all as specified and directed.

All as per item no 167 above but of size 16 Sqmm x4 Core complete all as specified and directed.

Returning filling including spreading leveling, watering and well ramming in layers not exceeding 25cm in soft/loose soil complete all as specified and as directed.

M&L for sand cushioning to UG cables (8 cm deep before laying of cable and 15cm deep over the cable) complete all as specified and directed. Note : Punned thickness will be measured.

Suppy and laying un-reinforced precast cement cable cover ,cass LV,type -I flat size 250x150x40mm complete all as specified and directed.

Removing excavated soil to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and as directed.

Supply and laying Tube light grade galvanised 80 mm dia with all fitting ,Laid in ground for crossing the cables across the road by cutting existing roadv , under floor by cutting existing floor and making good the road /floor surface after laying of pipe complete all as specified and directed.

Supply and laying LDPE pipes 50 mm dia with all fitting ,burried upto 45cm in ground for crossing the cables in ground from LT panel complete all as specified and directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundations, or for shafts, wells, cesspits, manholes, pier holes, etc. and not exceeding 10 Sqm on plan and getting out in soft /loose soil complete all as specified and as directed

Note : Tenderers may note that amount of credit Rs 3,15,445.00 will be deducted from the total amount arrived, at the time of Acceptance of contract.

PAWAN KUMAR

Siya constructions

Third Wave Services Pvt Ltd

JASPAL SINGH & CONST