Providing Furniture works for new Arts & Commerce College (1000 Students) building at Ghogha, Ta. Ghogha, Dist. Bhavnagar

Name of Work :- Providing Furniture rvorks I'or Nerv Arts & Cornrnerce College (

1000 Students )

Building at Ghogha, Ta. : Ghogha, Dist. : Bhavnagar.

BILL OF QUANTITIES

Ir. Qq Estim.ted Itenl of rorli l:stirnrted rrf. Unit Tot l Amount

No bot mav he ln Ii accordin

1 53.00 LINIT / CUPBOAI{D / DRESSING 11157 .47 SQM

:TABLE : Providing and Fixinq lrull / Low Height

Storage Unit as per drawing to be n'rade from

19mm thick Ply.wood structur.e and fiuished with

1 .0 mm thick Decorative Laminate Sheet on

outside and 0.80mm thick linel laminate inside as

specified and approved b1, architect fixed with

necessary fixtures and fastenign as per architect

drawing. The shulter shall be iixed rvith required

handle, hinges, magnet and locks con-rplete with

bidding patties and all required hardrvare. ply,

shelves removable type supportecl or.r sicle tak wood

battens on both side. all exposed edges shall be

covered with 8mm thick teak irood bcading patti

finished with melamine polish. .rc. complete as per

:architect's drawing as per instrLrction of architect &

engineer in charge.

55.10 Providing, making & supplying *ooden 10541.37 SQM

TCUPBOARD / DISPLAY LNI'I' of required size (

,depth shall be 1800rnm 1ix ) rrrrcl clesign as per'

.detail drawing using 1 8 rmD thick plyrvood of

lapproved brand in top, side, fr-orrt, shLrtter, intemal

:selves and support and 9mm thick plyrvood in back I

lcovered with 1.0 mm thick larninatc of approved

.make, pattern, colorrl-, texture and teak wood/ white

,beach batten, the rest of thr insidc surfaces.

shelves, back and thc top shall bc' finjshed with

mm lanriuates of apploved lrake & pattern.

: wooden fi'aming shall be used rvhcrcr.cr necessarv

with all steel finish hardrvare iittings i.e. handles,

locks, magnet, ar-lto stoppers. Iringes. channels.

,fasteners and 4mnr thick clear 3lass ir fi'ont shutter

,etc. complete as per detail drau irrqs ancl clirected by

rEngineer-in-Charge. (Note: F-or nlvlncnt u,iclth arrd

Height will be rneasrrled )

[]rtirrAtcd rate

.-, 63.00 Conference Table. Table Sizc: As required : 1298e.04 SQM

Providing and supplying Coniirence table made

with using 19mm TH Plywood . stmcture flnshed

with l.Omm TFI decoratir elaminlte sheet

approved by architect & nylon acljustors fixed witl.r

necessary llxtures and fastenirrg (IIard*,are) as per

architect drawing.Top portion r)f conlirence table

all edges shall be covcred rvith iequired l-eak u,ood

beadig patti or Molded Laminatc sheet finished

iwith approved melamine polishing rvork. The

Itable shall also provision lor carnirg wires &

mounting electrical plug poirt. su.itchcs & milk

etc. Complete as per architect rllau'inqs and as per l

inslruction of alclritcct & engi r..-.r' ir r,.lrar.ge.

42.50 TEXECUTIVE TABLE 2000rrrn x 850mm x 22040.06 SQM 936702.ss

750mm with side rutit 1 200mnr i OOnrnt x 750mnr :

I Providing and supplf ing Majr: -lairlc urade r.r,ith

19mm thk. plr.wood stlucllr.] trs trcr arcltitecl

drawing finished rvith l.0mr thli. dccorative

laminate on outside portion ,t 0.8nrnr thk. liner

Laminate inside as specifierl ,t rpploved b1,

architect fixed rvith necessiir\: I'lrtures and

fastening (Hardware) as per rrchircct drau,ing.

Provide Plastic Computer De::lr 'l'al,le Gronrrnet

Cable Wire Or"rtlet I lole Coycr 60utnr. Key-boald i

trey. S.S legs. Dlrrve ls u itl rclr' iopic roller'

channels , Handle and Lockinq rrrrangemenls l

with all necessary llxturcs and !rrslening . Provicle l

shutters as per drawing fixe u,ith Irlrnrllc , Hinges , :

magnet , completc rvith bidri,ng prtties and ail

required hardwarc provirl. lbolrcst as per

drawing. all exposecl shall be c ver-rrl l,ith requilcd

Teak wood beading patti llnir ,r', d u'itir appploved '

melamine polishing rvork. r'ourpit-te as per' .

i architect drawing and as per in:.llrctiou of architcct

I & engineer in chargc.

It Qty Estimated Item of work Istimated rate flnit Total Amonnt

No but be ln Figures to

5 407 .25 Providing and Fixing 70mm thick (hollow) s040.19 t, sQM 20526t7.38

,Plywood Partition Partly Pannelled Partly Glazed

as per design and pattern approved Consisting of

wooden member 50mm x 50mm framing (

vertical and horizontal grid shall be minimum

450mm in to in) and fixing 9mm thick plywood to

both side ofthe framing and covering both side and

including 8mm thick clear galss with glass work or

,frosting work of approved pattem and design

rincluding 12mm thick toughned glass door with '

,necessary SS fittings, hinges, barss pivot, ss

,handles etc complete and all exposed surfaces with

:lmm thick laminates of approved colour, pattem .

and design including alI labour. tools. materials etc.

:oomplete as directed by Engineer-in-Charge. :

27.25 Work Station / Operator Table of required Size : 15417.92 S oM 420t38.32

P Providing and supplying Reception table made with

using 19mm thk. plywood structure finished with

1.0 mm thk. decorative laminate sheet approved by

architect fixed with necessary fixtures and

fastening (Hardware) Top porlion of table

alledges shall be covered with required teak wood

beading patti finished with approved melamine

polishing work. Complete as per architect

drawings and as per instruction of architect &

engineer in charge. : .--..,-'i

7 223.50 Providing and Fixing Wooden Stage of required 4173.32 SQM

size ( Height should be 450mm atleast ) Consisting

of wooden memmber of size 50mm x 50mm Box

type framing ( vertical and horizontal grid shall be

minimum 450mm in to in) and vertical support at

every crossing of required length and height and

covering the dias top and side with 19mm thick

waterproof pl1'rvood including provision required

:step in the same dias with necessary screws, neils,

ladhesive as directed by Engineer-In-Charge.

It Qty Estimated Item ofwork f,stimated rate Unit Total Amoutrt

No but mrv he In Figures according to

185.75 Providing & fixing chemically lreated. moisture n36.ta

free, micro bevelled edge laminated HDF flooring

SQM I 433936.ts

and skirting on floor, steps, risers of approved

quality having minimuml0 to 13 mm thickness

and approved size, Surface Finish of Embossed in

Register, colour and design as approved as per

architectural drawings including all accessories i.e.

Reducer, skirting, T moulding, end edge, scotia,

trims, moulding, stair nose all necessary fittings, l

Floating installation with Lock and Fold, 3 mm

.armour underlying and solution materials and

making base surface levelled, filling cracks, cuts,

,dents etc. with white cement mortar if any etc.

lcomplete as directed by Engineer-in-Charge.

9 0.80 Srrpp lying and fixing 8mm thick Acrylic sheet ( 5096.87 S oM

Cast Quality ) for Incumbency Charl incl polishing .

the edge and finishing the sheet with approved shde

radium font and of directed design and pattern and

fixing the same with required S.S. sturd as directed

10 5.00 Centre Table/ Comer Table/Tipoi. : Providing and 3636.00 No. 181

. supplying Center Table/Comer Table/Tipoi with

rGlass top made with 19mm thk. plywood finished

.with 1.0 mm thk. Decorative laminate sheet

specified and approved by architect & fixed with

necessary fixtures and fastening (Hardware)

inclusive of approved melamine polishing work.

Top part of center table covered with 8mm thk.

toughened Glass with polished Edges. Complete as

per architect &awing and as per instruction of

architect & engineer in charge

11 3.00 Providing affixing steel rack of size 450 x 900 x 6363.00

2000 mm with five shelves fixing with sloued

,angles of size 40 x 40 x 2mm and plate of shelves

. having eight fold of size 450 x 900mm with

,necessary fixing nut bolts etc complete. As per

:detailed specification attached.

It. Qty f,stimated Item of work Estimat€d rate Unit Total Amount

It. Qty f,stimated Item of work Estimat€d rate Unit Total Amount

No but mav be ln Figures l, according to

12 12.00 lProviding and Aranging Thee Seater Gang Seater 9090.00 No

thaving seat and back made from CRCA Tubular

frame welded with perforated Diemoulded CRCA

. sheet. base frame

made from round Tubular welded

rwith horizontal beam Two side armrest welded

.with frame including finishing metal parts with i

epoxy polyster powder coaating of 50 micron

thickness Including all materials and labour and I

Upholstered with Artificial leather/Leatherette and .

molded PU foam, together with molded seat &

rback covers etc. Complete as per drawing and

instruction ofengineer-incharge & overall weight of

.unit shall not be less than 35 kg. 3 Seater S.S.Gang

'Seater: size-l590mm x 480mm x 880mm (H)

3 100.00 Two seater School Bench : Providing, fixing & 6363.00 No.

arranging of Student 2(two) Seater Bench (1) Top :

S.S. 304. l.6mm thick with Framing. (2) Lower

Plate for Bag: S.S. Perforated Sheet 2mm thick

with Solid Frame and Angular Supporl. (3) Seat

and Back of Chair :S.S. 304 Perforated Sheet, 2mm

Thick with Solid Framming. 4) whole Frame

structure: S.S. 304 grade Pipe O 25mm dia2.7 6'

mm wall thickness pipe including all required

materials & equipment, labour, fixtures & fastening

etc complete. Size 1200mm (w) 1000mm (D)

14 18.00 tStool (forTrainee) : Provding and fixing of teak 898.90 No. i

wood table having top: 355mmx355mx570mmht.

With tapper leg of 45mmx45mm cross section

,including necessary fixtures &

complete. (As per Photographs attached)

15 14.00 White / Green Boards : Providing & fixing of 4090.50 No

White display boards having size of 600x900mm

and min 9mm thick core material having frame of

alluminum & board shallbe 10 mm glossy finished

alkosign, sign mark or equivalent brand (acidfree).

including necessary fixing &

complete. (As per Photographs attached )

16 100.00 PVC Chairs having dimension not Iess thar.t 966.s 966s7.00

53 0mmx500mmx73 Omm With S.S.pipe Fram

rwork, overal lweight not less than 2.5kg, having

back rest and black coloured including labour for I

lifting and supplying as directed by Engineer In I

It. Qry Estimated Item oI lvork Estimated rate Unit Total Amount

It. Qry Estimated Item oI lvork Estimated rate Unit Total Amount

In Fi ures aCcordin to

17 15.00 HIGH BACK revolving & tilting EXECUTIV 8181.00 No.

CHAIR : Providing and Supplying High back Chair :

for conference with M.S frame work. Upholstered

.with Artificial leather/Leatherette and molded pU

foam, together with molded seat & back covers.

.The back foam should be designed with contoured l

lumber support fo extra comfort. Caster of high .

idurability & hydraulic. The chair should have l

cylinder with 5 years" warranty. The size of chair .

,53cm x 79cm (back side) and 51cm x 49cm (seat I

.size). The PU form should be molded with

.densit545+ 2 kg/m3. with One piece armrests are I

lscratch and weather resistant. The permanent i

contact mechanism is designed with 3600 revolving r

:tyep, 12o seat tilt 19o back tilt, Front pivot for tilt I

with feet resting on groind ensuring more comfort,

lTilt tension adjustment, 5 position locking with

.anti-shock back mechanism, Which should prevent

'the backrest from impacting the user when the lock

,is released, static seat depth adjustment:0.5 cm

'position locking.

I 8 I .00 rnnrr seare D soFA : providing and supptying 19089.00 No.

Plywood (Ml ) structure frame with S.S. legs

: lrequired necessary support fixed with necessary I li

I ii ;fixtures and fastening (Hardware)(M14).

covered with 32 Density pU loam(M22) with

required Thickness as per design in seat & back .

; , ,and handle portion this should be again covered ; :l

I: iI :with 14 mm thick PU foam(M22) with Madarpat i I

:cover upholstered ;;;;,:;i;r;i:

on it & rrnhnlctprcz{ fabric(M26) or leather of r ,: :, i

.suggested & approved by architect finished with . i1 I ]

drawing. Complete as per architect,s drawing and

I ; :as per instruction of architect & engineer in charge. a l

,,* L :llgferdrawing) I

It Qty Estimated Item of lyork Estimated rate Unit Total Amount

It Qty Estimated Item of lyork Estimated rate Unit Total Amount

t\ but m be In Fieurcs J acc to

19 2.00 TWO SEATED SOFA : Providing and supplying 12726.00 No.

sofa(2seater) made with using 19mm Thk. plywood

i(M1) structue frame with S.S. legs required r

necessary support fixed with necessary fixtures and :

'fastening (Hardware)(M 14). It shall be covered

with 32 Density PU foam(M22) with required

,Thickness as per design in seat & back and handle

rportion this should be again covered with 14 mm

thick PU foam (M22) with Madarpat cover on it &

upholstered fabric(M26) or leather of suggested &

approved by architect finished with seat, back & all

visible side as per architect drawing. Complete as

per architect's drawing and as per instruction of

.architect & engineer in charge. (Refer drawing)

20 75.25 'Providing & fixing roller type window curtains of 2090.10 SQM 1s7325.18

approved brand and quality including same brand

tchannel - chain mechanism, synthetic black out

,fabric of approved colour & design with all

necessary fittings etc. complete as directed by

21 12.00 Providing Stainless Steel Dust Bin in cylindrical 1090.80 , No..

l ishape with steel pedal and lid Garbage bin for

:: washroom , kitchen, bathroom and office of size

" x 11'- 05 Litre as directed by Engineer-in-Charge.

22 2.00 Providing and supplying Single Bed of size 750 x 15453.00 No..

1800 x 500mm of approved design and pattem as

per detail drawings using Indian teak wood in

frame structure and 19mm thick ply wood of

approved qualiy in frame of box or box structure,

with necessary other hardware fixtures and

fastening and S.S./ brass legs and including maress

of 100mm thick super soft "U' foam of approved

make,2 Nos. of pillow of sandard size, bedshee,

,pillow cover of approved qualiy etc. complete as

directed by Engineer-in-Charge.

rt Qty f,stimated Item ofwork Estimated rate Unit Total Amount

rt Qty f,stimated Item ofwork Estimated rate Unit Total Amount

No but mar bc ln Figures I A rdin to

23 5.00 'Providing and Arranging NEWSPAPER STANDS 5454.00 No..

'TOP: Made of 18mm THK. ISI Marked pre

Laminated MDF Board IS- 14587- 1998. in

,approved shade with half round lipping with

rthinner polish or touch wood polish, shall be fitted

tangle frame of 32 x 32 x 3/2.5 mm contains one

extra lengthwise support of same angle.

, STRUCTURE : Made of M.S. angel 32 x 32 x

r3i2.5 duly welded. Confirming to IS. PAINTS :

Two coats of air drying synthetic enamel paints of

ISI mark Confirming to IS-2392 made over two

coat of metal primer. FINISHED SIZE : Finished

size of Structure and top shall be as showr in

figure. Including all materials and labours etc.

complete as per drawing and instruction of

Engineer-in charge

24 6.00 Notice Board: Size: 120cm Wide x 168cm High 5676.20 No.

and Overall DisplayHeight:2O3cm. Specification:

Portable Loop Fabric Panel Floor Display Stand. i

(a) Panel Dimensions: 120cm wide x 168cm High.

(b) Overali Display Height:203cm (c) Panel

Display frame finishes: light gray or beige. (d)

9!.i ccolors availabl e:.

303.00 Pro. And hxing single layer water proof gypsum 606.9s S oM 183905 .85 |

board 12.5 mm thick sections using water proof

board of size 7220 mm x 1830 mm x 8.0 mm

suspended by GI suspender charmel of size 25 mm :

'x 3 mm with intermediate channel og size 18 mm x

40 mm x 0.8 mm at 7220 mm center to center

ceiling section of size 40 mm x 35 mm x 0.55 mm

'at 45'/ mm c/c and perimeter channel A of size

:mmx27 mm x 30 mm x 0.5 mm at edges & drops

incl.paper tap sand sofit cleat, anchor fastener,

scoch bolt connecting cleatjoining compound top

coat on ceiling incl.making necy.opening for light

fitting,diffuser etc. comp. as per detail drawing as

26 1.00 Providing and supplying of wooden temple ( I

Sharda Mata ) of size 18W x 8.5 D x 24H inches

for college chamber that is designed using durable :

:materials like teak wood or plywood featuring a

:compact, wall-mounted or tabletop design with

drawers for essentials including LED lighting, r

:traditional or modem minimalist

'glossy/matte finish to blend with office interiors.

Total Rs. 4211.0.87

' I / We Am / Are willing to carry out the work @ _%@

It. Qty Estinated Item of work Estimaled rate flnit Tohl Amouot

No but maY bc In Fiqures 1", accordinq to

(should be written in Figures and words) of the estimated rates mentioned above, Amount of

My / Our tender works out as under :-

Estimated Amount Put to tender. Estimated Amount Put to tender.

Add. % Above Rs. Deduct o%

Total Rs. Total Rs.

In Words In Words

I All work shall be car ed out as per P.W-D. Hand Book and other sp€cification ofthe Divisiofl or as directed.

2 Rates quoted include olearance of site (rrior commencement of work and at its close) in all resp€cts and hold good for work under all conditions, site

moisfure, weather etc.

J Th€ contractor shall exhibit the details of work, tender arnount, specifications as per Covt. circular No. BDG / 3277 / 1657 Dated. 26-4-1978 and G.R. No.

TNC/ 1090-24 C, Dated. l8-11-91 as directed by the Engineer-in-charge on the work sire fot which contractor

4 Testing of materials as per statement attached with the specifications. The materials shall be tested in G.E.R.I. Bill for testing shall be paid by the

department and I o/o (One percentage) of amount put to tender after deduction the cost ofc€ment & steel mentioned in clause 59(a)

5 In R.C.C. item where there is change ofgrade mix or change as per actual mix design the difference of of cement consumption shall be added / deducted

from rate of original item at the rate mentioned in tender

6 For earthquake resistanc€ provision the work shall b€ canied cut as per the instruction ofEngineer in charge.

7 The other conditions of Schedule "8" will remain unchanged.

8 Labor Cess I % (One P€rceno of Bill Amount shall be rccovered &om contractor of building or other construction works. (Resolution ofEmployment and

condition Act 1996)

Signature of Contractor

Executive Engineer