Civil Works including Gypsum ceiling works for the Modification of Rooms in 2nd floor of Administrative Block

Amount

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction,including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with:12.5 mm thick tapered edge gypsum fire resistant board conforming to IS; 2095-Part I. Preferred Brand: Gyproc- Gypsteel Ultra/Gypserra, Anutone and Armstrong

Providing and fixing tiled false ceiling of approved materials of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grams per sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x 1.6 mm fixed to ceiling with 12.5mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85x 30x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer -in-charge.GI Metal Ceiling Lay in perforated Tegular global white color tiles of size 595x595 mm and 0.5mm thick with 8 mm drop; made of GI sheet having glavanizing of 100 gms/ sqm(both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient) of 0.5, electro statically polyster powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece. Preferred Brand: Gyproc- matrix grid, Anutone and Armstrong

Providing and fixing tiled false ceiling of approved materials of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grams per sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x 1.6 mm fixed to ceiling with 12.5mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85x 30x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer -in-charge.12.5 mm thick fully Perforated Gypsum Board tile made from plaster board having glass fibre conforming to IS: 2095 Part I, of size 595x595 mm, having perforation of 9.7x9.7mm at 19.4 mm c/c with centre borders of 48 mm and the side borders of 30 mm, backed with non woven tissue on the back side , having as NRC ( Noise Reduction Co efficient) of 0.79, with 50 mm resin bonded glass wool backing. Preferred Brand: Gyproc- matrix grid, Anutone and Armstrong

Providing and fixing factory made uPVC door frame, made of uPVC extruded section, of size 65 mm x 55 mm with wall thickness 2.0 mm (? 0.2mm), corners of the door frame to be mitred cut and jointed with plastic brackets and stainless steel screws, reinforcing hinge side vertical of the frames with PVC profile of Size 28 mm x 30 mm having wall thickness 2 mm ( ? 0.2 mm), including providing & fixing 3 nos of 125mm long stainless steel hinges to the frame, fixing the frame with jamb with required number & size of anchor dash fastners, all complete as per manufacturer's specification and direction of Engineer-incharge.

35 mm thick factory made Solid panel PVC Door shutter, made out of single piece extruded solid PVC (±0.2 mm) thick, having styles & rails (except lock rail ) of size 95 mmx 35 mm x 5 mm, out of which 75mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm integrally extruded on the hinges side of the profile for better screw holding power, including reinforcing with MS tube of size 40 mm x 20 mm x 1 mm, joints of styles & rails to be mitered cut & joint with the help of PVC solvent cement, self driven self tapping screws & M.S. rectangular pipes bracket of size 190 mmx 100 mm of cross section size 35 mm x 17 mm s 1 mm at each corner. Single piece extruded 5 mm thick solid PVC Lock rail of size 115 mm x 35 mm x 35 mm, out of which 95 mm to be flat and 20 mm to be tapered at both ends, having 15 mm solid core in middle of rail section integrally extruded, fixing the styles & rails with the help of solvent and self driven self tapping screws of 125 mm x 11 mm, including providing 5 mm Single piece solid PVC extruded sheet inserted in the door as panel, all complete as per manufacturer's specification and direction of Engineer-in-charge.Decorative finish (wood grained finish)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)

For shutters of doors, windows & ventilators including providing and fixing hinges /pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing plain Multipurpose Cement board (High Pressure steam cured) as per IS : 14862,with suitable screws for fibre cement board in ceiling etc. complete (frame work to be paid separately) :6mm thick cement board

Providing and fixing aluminium pull bolt lock, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour and shade, with necessary screws bolts, but nut and washers etc. complete.

Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete:125x64x2.50 mm

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete:250x16 mm

Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete :150x10 mm

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width form 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.

Providing and fixing stainless steel hanging type floor single door rubber stopper long 100mm made of 2mm thick stainless steel sheet with necessary stainless steel screws, etc. complete.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm

Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS : 15622, of approved brand & manufacturer,in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 600x600 mm

Laying vitrified floor tiles in different sizes with 3mm spacing (using vitrified tiles supplied by the department at free of cost), with water absorption less than 0.08% and conforming to IS : 15622, of approved brand & manufacturer,in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of Tile 600x600 mm

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.

Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg). including filling /grouting and finishing complete as per direction of Engineer-in-charge.Size of Tile 600x600 mm

Providing and laying cement concrete in retaining walls, return walls, walls ( any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc. up to floor five level, excluding the cost of centering, shuttering and finishing: 1:2:4 ( 1 cement : 2 coarse sand :4 graded stone aggregate 12.5 mm nominal size)

Providing and fixing floor mounted, white vitreous single piece of siphonic water closet of size:360x730x740 mm of approved brand/make, shape, size and pattern including white vitreous cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with PP soft close seat cover, Hinges, 450mm Long Braided Hose with Two 15mm Nuts & Rubber Washers Without Nipple, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap after dismantling the existing European water closet etc, complete as per the directions of Engineer-in-Charge. Preferred Brand: Jaquar, Artize and Kohler

Providing and fixing Wall Hung Integrated Wash Basin with C.I. brackets, 15 mm C.P. brass pillar cock, 32 mm C.P. Click Clack Waste Half Thread With 80mm Height, after dismantling the existing wash basin, including painting of fittings and brackets, 450mm Long Braided Hose with Two 15mm Nuts & Rubber Washers Without Nipple, cutting and making good the walls wherever require: White Wall Hung Integrated Basin size 490x430x390 mm with a pair of 15 mm C.P. brass pillar cock etc, complete as per the direction of Engineer-in-Charge Preferred Brand: Jaquar, Artize and Kohler

Providing and fixing CP brass Single Lever Exposed Parts Kit of Hi-flow Diverter Consisting of Operating Lever, Cartridge Sleeve, Wall Flange (with Seals), Button Assembly Sleeve & Button with Concealed Body for Single Lever High Flow Diverter with Button Assembly of quality & make as approved by Engineer in charge. Cost includes material, labour, cutting chases and making good the walls etc.(a) 15mm nominal dia etc, complete as per the direction of Engineer-in-Charge. Preferred Brand: Jaquar, Artize and Kohler

Providing and fixing C.P. brass overhead rain shower with 15 or 20 mm inlet:150mm diameter and Shower Arm 20mm dia. & 450mm Long Round Shape with 90˚ Bend for Wall Mounted Showers with Flange of approved make. Cost includes material, labour and carriage etc, complete as per the direction of Engineer-in-Charge. Preferred Brand: Jaquar, Artize and Kohler

Providing and fixing C.P spout with wall flange of approved brand and quality. 15 mm nominal bore. Cost includes material, labour etc, complete as per the direction of Engineer-in-Charge. Preferred Brand: Jaquar, Artize and Kohler

Providing and fixing brass Angular stop cock with Wall Flange of approved brand and quality :15 mm nominal bore. Cost includes material, labour etc, complete as per the direction of Engineer-in-Charge. Preferred Brand: Jaquar, Artize and Kohler

Providing and fixing Soap Dish Holder on the existing wall with concealed fittings arrangements. Cost includes material, labour etc, complete as per the direction of Engineer-in-Charge. Preferred Brand: Jaquar, Artize and Kohler

Providing and fixing stainless steel 304 Grade grating of approved quality and colour. square type 150 mmx150mm. cost includes material, labour etc, complete as per the direction of Enmgineer-in-Charge

Supplying and fixing C.P Hand Shower (Health Faucet) with 8mm Dia, 1 Meter Long Flexible Tube & Wall Hook good quality including cost of materials and labour charges etc. complete as per the direction of site engineer-in-charge. Preferred Brand: Jaquar, Artize and Kohler

Supplying and fixing stainless steel Towel Rack 600mm Long with Lower Hangers including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge. Preferred Brand: Jaquar, Artize and Kohler

Providing and fixing 4mm thick rectangle mirror of superior glass ( of approved quality) of size 600x400mm and of required shape with all fitting accessories. Cost includes materials, labour, screws etc. complete as per the direction of Engineer-in-Charge.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps

Providing and fixing White plastic seat with hinges and rubber buffers on existing European water closet of approved brand and quality. Cost includes material, labour etc, complete as per the direction of Engineer-in-Charge Preferred Brand: Hindware, Cera and Parryware

Providing and fixing Angle cock with wall flange of approved brand and make: 15mm nominal bore. Cost includes material, labour etc, complete as per the direction of Engineer-in-Charge. Preferred Brand: Hindware, Cera and Parryware

Making connection of CPVC distribution branch with PPR main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete: 20 to 50 mm Outer diameter.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.20 mm nominal outer dia pipes

Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 75 mm pipe 6 Kgf/cm2

Dismantling steel work in single sections including dismembering and stacking within 50 metes lead in:Channels, angles, tees and flats

Dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:Of area 3 sq. metres and below

Supplying and laying of polypropylene Bali Indonesia carpet (best make of approved quality) of thickness 4mm of required shades, as per the following specification and design including cost of materials, labour and conveyance per the direction of Engineer in charge. Technical Parameters: Construction : Loop pile, Yarn Type : 100% BCF Polypropylene, Dye Method :Solution Dyed, Thickness : 4MM, Weight : 1.150Kg/Sqm, Primary Backing : Woven Polypropylene, Secondary Backing : Woven Polypropylene. Preferred Brand: Classic Carpet, Donaire Carpet and Divine Carpet

Providing and fixing premium zebra Horizontal blinds (Best make of approved quality) for windows (150x150CM) of required shades, approved fabric made of 100% polyester of 0.70mm thick with UVproof , virtually maintenance free having plastic bottom chain thickness of chain-0.50mm and diameter- 3mm. Including the cost of materials, installation, all fixtures and fittings etc, complete as per the direction of Engineer-in-Charge. Technical Parameters: Composition: Polyester 100%, Thickness :0.70 mm (+ -5%), Weight : 171g/Sqm (+ - 5%), Solar reflectance : 67.1%, Solar absorptance : 13%, Solar Transmittance: 19.9%, UV Protection Factor: 50+/UV-A:3.5/UV-B:0.2, Strip Size : Solid: 7.5 cm, Sheer: 5.0 cm, Tensile Strength : N/5cm , warp: 238.1, Weft: 2578.3, Tearing Strength: N, Warp: 39,Weft: 116.5. Preferred Brand: NL blinds, Greenguard and wincera decors

Providing & Applying high quality acrylic modified resin based texture of Dholpur/Red sand stone Pattern with anti algae and UV resistance properties to be appliedas intermediate finish in desired pattern @ 43.04 kgs/10 sqm to form film of 1- 1.5mm thickness after scrapping and properly cleaning the surface to remove looseparticles from the plaster surface, followed by top coating with Premium AcrylicSmooth exterior paint with Silicone additives of required shade by two or morecoats @ 1.43 litres/10 sqm, complete as the direction of Engineer -in-Charge

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile including applying additional coats wherever required to achieve even shade and colour.Two coats

Dis tempering with Ist quality acrylic distemper, having VOC (Volatile Organic Compound) content less than 50 grams /litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.Two coats

Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications: Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 ltr /10 sqm

Painting with synthetic enamel paint of approved brand and manufacture ofrequired colour to give an even shade :One or more coats on old work

Polishing on wood work with ready made wax polish of approved brand andmanufacture :Old work

Providing and fixing 12 mm thick frameless single leaf toughened glass door shutter(1.20x2.37M) of approved brand and manufacture, all fitting made by stainless steel (304 grade) including providing and fixing cam action floor spring with closing force EN3 double cylinder(heavy duty), top and bottom patches,H type handles(45cm height, 2.5cm dia), door lock at center, top & bottom pivot and transparent beading etc. including cost of material, labour, cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate and making necessary holes etc. Complete as per the direction of Engineer-in-Charge. Preferred Brand: Saint Gobain, Ozone and Asahi

Providing and fixing 12 mm thick frameless sliding toughened glass door shutter(1.80X2.00M) and fixed portion (1.80X1.05M) at the top of the door of approved brand and manufacture, all fitting made by stainless steel (304 grade) including providing and fixing sliding system, glass to glass connecting patch to wall/ceiling, 1nos of lock at center portion, H type handles(45cm height, 2.5cm dia), MS tube frames at top and bottom for sliding system, silicone sealant, transparent beading etc. including cost of material, labour, cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece S.S. sheet outer box with slide plate and making necessary holes etc. Complete as per the direction of Engineer-in-Charge. Preferred Brand: Saint Gobain, Ozone and Asahi

Suresh