PROVN OF VIEW SHED IN DAD GUEST HOUSE AND PROVN OF SECURITY FENCING IN OFFICE COMPLEX AT LANSDOWNE UNDER GE LANSDOWNE

Amount

Surface excavation n.exc (not exceeding) 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed.

Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5m in depth and getting out in soft / loose soil complete all as specified and directed.

Material and labour for cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation filling , mass concrete complete all as specified and directed

M&L for RCC Type A1 1:1/2:3 using 20mm graded aggregate as in footings fdn beams etc complete all as specified and directed.

M&L for reinforced cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) in Columns complete all as specified and directed.

All as per item No 5 here in above but in beams and lintels complete all as specified and directed.

M&L for form work to sides of footing and plinth beams finished fair and rough complete all as specified and directed.

All as per item No 7 here in above but for columns complete all as specified and directed.

All as per item No 7 here in above but for sides and soffits of beams and lintels complete all as specified and directed.

M&L use and waste of form work to soffits of suspended slabs such as roof slabs, and similar work not exceeding 200mm thick (horizontal of sloping) for flat and rough finished surface complete all as specified and directed.

M&L for formwork to edges of concrete flats, treads, breakes in floor, window cills, concrete railings, opening in concrete walls, floors and roofs n.exc. 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n.exc. 20cm wide complete all as specified and directed.

M&L for RCC type A1,1:1.5:3, (20 mm graded aggregate) as in slab supported on walls, beams and colmns in floors, roofs, landings, balconies etc complete all as specified.

M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending pirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.

All as per item No 13 here in above but 6mm to 8mm dia complete all as specified and directed.

Returning filling in incl spreading leveling watering and well ramming in layers n.exc 25 cm in thickness complete all as specified and directed.

Removal of soil to a distance n. exc 50 m and depositing complete all as specified and directed.

M&L for brick work with sub class B bricks straight or curved on plan exc 6 m mean radius , built in cement mortor 1:6 complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate as in coping complete all as specified and as directed.

M&L 10mm thick plaster on fair faces of brick work or concrete surfaces with CM 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick on other than fair faces of brick work or concrete surfaces in CM 1:4, finished even and smooth without using extra cement complete all as specified and directed.

M&L for non skid ceremic coloured tiles 7 to 8mm thick (suqare/rectangular) area of each tile exceeding 0.11sqm but not exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl over 15 mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes finished even and rough complete all as specified and directed. complete all as specified and directed.

Material & Labour for preparation of preparation of new plastered or un- plastered surfaces and walls including cornices, pilasters etc and applying Two Coats of cement base paint complete all as specified and as directed.

M & L for preparation of newly plastered or previously untreated surfaces of walls and applying two coats of oil emulsion distemper over a coat of birla putty complete all as specified and directed.

Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distances pieces, cleat etc

S&F for PVC ceiling with PVC panels of 9mm thick and 250mm wide interlocked type incl aluminium frame/angle or channels and necessary fitting as rawl plugs,screws,adhesive etc allas spd.& directd.by GE/ Engr-in -charge.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed (Make JSW , CRILL COLOUR ROOF LTD, TATA BLUE .)

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed (Make JSW , CRILL COLOUR ROOF LTD , TATA BLUE) .

M &L Hard core of gauge n exc 63mm, deposited, spread and levelled in layers n exc 15cm thick broken stone, water and rammed to a true surface complete all as specified and directed.

M & L cement concerte 75mm thick 1:3:6 type C-2 (using 40 mm graded) as in plinth protection, finished smooth and even without using extra cement complete all as specified and directed.

Supply and fixing anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

S&F anodized aluminium door shutters aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc complete all as specified and directed.

S&F anodized aluminium windows and ventilator shutters aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading screws, locking arrangement etc complete all as specified.

S& F Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperature 1.18mm as in gauze door /window/ventilators shutters complete all as specified and directed

S&F fixing aluminium grill for windows in approved design/pattern by Engr-in-charge fixed with aluminium beading complete all as specified and directed

S&F for sheet glass 5.50 mm thick tinted quality and glazing complete all as specified and directed by Engineer-in-Charge.

S&F brass mortise lock (4 levers), vertical type, size 100mm long complete all as specified and directed by Engr-in-Charge.

S&F Floor door stopper 150mm long of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed .

S & F double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed by Engineer-in-Charge

M&L for preparation of new steel surfaces and applying two coats of synthetic paint over a coat of red oxide primer over 10 cm width or girth not otherwise described etc.

S&F for PVC Panneling with PVC panels of 9mm thick and 250mm wide interlocked type incl angle or channels and necessary fitting as rawl plugs,screws,adhesive etc allas spd.& directd.by GE/ Engr-in -charge.

Excavation in post holes (or similar holes) each n.exc. 0.5 cum, getting out in soft/loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n.exc 50m and making good surface complete all as specified and directed

S&F MS as in Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed

Supply only galvanised chain link fencing of any dia and any mess size as directed by Engr-in-Charge complete all as specified and directed.

Fixing only chain link fencing including line wires any mesh, size and type to any type of standards, rails, straining bolts etc including provision of binding wire complete all as specified and directed

S & Fix galvanised, 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia bars at 75 mm spacing and straining and fixing to ant type of standered rail straining bolt including securing or tying at crossing with & provision of galvanised steel wire stpple or steel pins (each line to be measured) complete all as specified and directed

S & F mild steel screrw bolt 10 mm dia (Machine made) with exagonal or square heads at one end and screwed oyher, or screwed both ends each screwed end to be fitted with washer and one hexagonal or square nut not exc 5 cm long complete all as specified and directed.

M&L for MS bars 10 mm dia & over (Round Bars) cut to length bent to shape reqd including cranking binding spirally for hooping cols, hooking ends and binding with and including mild steel wire annealled not less than 0.90 mm dia or securing with clips for runner in chain link fencing complete all as specified and directed.

Preparation of new or previous untreated surfaces of steel and iron of any description n exc 10cm width or girth not when unconnected with other painting or when painted in a different tint and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for point wiring concealed type with 1.5sq mm PVC insulated unsheathed single core multithreaded copper conductor cable 1100 volts grade incl 1.5sq mm PVC insulated unsheathed copper conductor cable as earth continuity conductor drown through in and incl PVC rigid conduit not less than 20mm dia with its accessories with provn of CI/pressed steel terminal switch box and white bakelite plastic laminated top sheet cover and fixed with brass screws cup washer for fixing switches/socket/regulators etc for the following, all as specified and directed. (Make of Cable : Finolex/RR Cable/Havells & Make for Conduit : AKG/PRESTOPLAST): - One light/fan/bell point controlled by one No piano type switch 5 Amps single pole one way

All as per item No 49 here in above but One 3 pin 5 Amps socket outlet on same board controlled by one, one way 5 Amps piano switch.

All as per item No 49 here in above but One socket outlet 5/3 pin 5 Amps controlled by one switch on independent board.

Material and labour for power point wiring for one 15 Amp switch socket combined outlet point on Independent Board with 2.5 Sqmm PVC insulated unsheathed,stranded copper conductor cable single core 1100V grade with in and including rigid PVC conduit 20mm or higher size medium grade in concealed manner with all PVC conduit accessories with provision of CI/pressed steel terminal switch box & white bakelite plastic laminated top sheet cover fixing with brass screws and cup washers and 1.5Sqmm PVC insulated unsheathed stranded copper single core 1100V grade as earth wire & wire connected with the main earth point all as specified & directed. (Make of Cable : Finolex/RR Cable/Havells & Make for Conduit : AKG/PRESTOPLAST): -

S&F Modular Switch, 6 A, 1 Way, 1 Module. Make - Crabtree complete all as specified and directed. Make : Anchor/ Cona / Havells

S&F Modular Switch, 16 A, 1 Way, 1 Module. Make - Crabtree complete all as specified and directed. Make : Anchor/ Cona / Havells

S&F Modular Socket Outlet 6A - 2/3 pin combined 2 module Make- Crabtree complete all as specified and directed. Make : Anchor/ Cona / Havells

S&F Modular Socket Outlet 6A/16A - 2/3 pin combined 2 module Make- Crabtree complete all as specified and directed. Make : Anchor/ Cona / Havells

S&F modular metal flush box 3 module complete all as specified and directed. Make : Anchor/ Cona / Havells

S&F modular metal flush box 6 module complete all as specified and directed. Make : Anchor/ Cona / Havells

S&F modular bell push single pole one way 5/6 Amp all as specified and directed Make : Anchor/ Cona / Havells

S&F bell ding dong elelctric 230V AC single pole all as speccified and directed Make : Anchor/ Cona / Havells

M&L ceiling rose 3 terminal / PVC/ polycarbonate, isolated body all as speccified and directed Make : Anchor/ Cona / Havells

S&F MCB DB SPN 8 way with 200 amps 240 volts rated copper busbar in sheet steel enclosure.double door type Make : Legrand/Schneider/Hagar

Supply & fixing MCB , SP, AC, 240 volts of 06 to 32 Amps capacity 10KA, 'B' series and making connections with suitable size of copper lugs complete all as specified & directed. Make : Legrand/Schneider/Hagar

Supply & fixing Isolator, SPN, AC, 240 volts of 40 Amps capacity 10KA, 'B' series and making connections with suitable size of copper lugs complete all as specified & directed. Make : Legrand/Schneider/Hagar

S&F LED Tube light fitiing 20 Watt with LED light source with uniform light output, with all accessories including its connection with 2 core seathed copper conductor cable of size 0.5 Sqmm with complete with all accessories all as specified & directed Make ; Philips Astra Line 20-Watt LED (Cool Day Light) /Havells / Wipro.

S&F 15 Watt LED Panel 1X1 environmental friendly, new generation,aesthetically designed, flat panel for surface mounting which provides soft-light and glare free symmetrical illumination, complete with separate electronic driver ceiling light 15W including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230V , 50 HZ all as specifified & directed. Make: Havell's Cat No: (PLUTO PANEL (SURFACE) LUTOSURFACE1X1PLS15WLED857S /Philips/ Bajaj /Surya Roshani Ltd

S&F Round shape, 6 Watt LED downlighter with high efficacy LEDS, ideally suited for low ceiling areas to give glare free light , complete with including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230V , 50 HZ all as specifified & directed. make: Havell's Cat No: (EDGEPRO ROUND) EDGEPRORDDLR6WLED840S /Philips/ Bajaj /Surya Roshani Ltd

S&F Decorative, wall mounting fixture, in durable plastic body & designer mesh in gold finish , suitable for 14 W retrofit CFL/LED (B-22 base) with and including lamp holders, connector block and retrofit type LED lamp 1 x 10 W (including suitable LED Lamp 10 W), complete with all accessories prewired and including connecting up with twin core twisted flexible copper conductor cable all as specified & directed. Make - Havell's Cat Part No: (GLAZE Upto 14 W Retrifit CFL (B22) LHFOECE1TZ1B014 /Philips/ Bajaj /Surya Roshani Ltd

S&F in replacement energy saving and environmental friendly long life LED street light 25 Watt (Bldg security light) made up of pressure die cast aluminium housing with mild power LED as lighting source and PC cover having TOP Opening seperate driver compartment with IP65 protection and impact resistance of IK07 fixed on wall with GI pipe of suitable dia and all fixing accessories including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230V , 50 HZ all as specifified & directed. Make -Havell's Cat Part: (ENDURAPEARLSL25W MP) ENDURAPEARLSL25WLED757SASYTOPCMP/Bajaj/Surya/Philips/CG

Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick burried directly in ground. Earth pit not less than 2.25mtr depth and top edge of the earth plate not less than 1.5mtr below normal ground level connected to galvanised earth lead wire 4.0Sqmm dia by means of nuts,bolts & washer etc. Earth wire connected upto main earth point/DBs alongwith 15mm dia earth protection pipe from top edge of the earth plate to main earth point to be connected and 20mm dia watering pipe light grade with funnel and provn of PCC using cement concrete (1:2:4) mix type B1 ( using 20 mm graded stone agregate) and RCC pit cover 50 mm thick precost RCC (1:2:4) mix type B1 duly reinforced with 8 mm dia of ms bar @ 15 mm CIC with both way lifting arrangement complete including all necessary excavation & earth work all as specified and directed

Supply and lalying XLPE insulated, screened, PVC bedded, galvanized steel strip or wire axmoured, electric power cables (heavy duty) with alumimnium conductor, 1100 volts, grade crosws sectional area 10 sqmm 2 core incl earth work, sand cushioning, brick or PCC covering, light grade GI tubing where necessary and testing all as specified and directed.

Excavation in trenches in soft/disintegrated soil not exc 1.5 m wide and not exceeding 1.5m in depth for laying UG cable/foundation/for poles etc complete all as specified and directed.

Returning filling in soft/disintegrated soil including spreading levelling watering and well ramming in layers n.exc 25cm each layer complete all as specified and directed.

Supply and spread fine river sand in trenches as cushioning to underground cable on top and bottom of cable all as specified (measurement to be taken after punning down).

M&L for cable protection bricks common burnt clay sub class 'B' designation 75 for protection of UG cable laid in trenches all as specified and directed at site.

Supplying, laying & jointing GI water tubing, 25 mm bore, light grade as in sleeving etc laid in trenches / pole post /under culvert/ under road etc. for cable protection complete all as specified and directed .

S&F modular white cover plate with frame 3 module complete all as specified and directed. Make : Anchor/ Cona / Havells

S&F modular white cover plate with frame 6 module complete all as specified and directed. Make : Anchor/ Cona / Havells

PIONEER REFRIGERATION AND ELECTRICALS