SPECIAL REPAIR TO HANGER OF R AND O FLT AVN SQN UNDER GE MISSAMARI

Amount

Dismantling of corrugated AC/fibre/GI sheet any pattern in roof incl ridge complete all as specified and directed

S & F 0.63 mm thick Plain galvanised, mild steel sheeting in ridges, hips, valley gutter all as specified with grade of zinc coating 275 complete all as specified and directed

S & F glavnised corrugated mild steel sheating 0.63 mm thick with two corrugation side lab fixed with coatch screw and washer in roof, wall etc.complete all as specified and directed

S&F in repair Steel window/ ventilator glazed and gauged (combination) with side hung shutters with and incl guard bars of MS 12 mm sq bars, incl box type / projecting type hinges, and steel peg stay, handle & locking arrangement and frame made out of 1.25mm thick pressed steel frame including Guard bars complete all as directed.

M&L for PCC 1:2:4 in cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, incl demolition of existing cement concrete as directed

S&F framed work as in doors or gates of angle or other section incl guide channel rails complete drilled for fixing of steel sheeting. Doors, etc to be prepared for hanging or sliding with and incl either hooks and hinges (exclusive of steel sheeting or other covering running rails and guides) fixing in repairs complete.

M&L 18/19mm thick Perforated particle board/tiles for insulation and acoustic purposes, 60x60 cm in size, fixed in ceiling or wall panelling with nails to timber frame work or with staples on snap grid incl taking down existing unserviceable boards complete

S&F 600x600mmx4mm thick designer 'E' board classic as in false ceiling including S & F 'Tee" grid frame work. The section consisting of main Tee 37mm x24mmx0.60mm thick, cross runner tee 37mmx24mmx0.60mm and. Perimeter angle 24mmx24mmx0.50mm thick shall be fixed to wall with GI screw of 40mm long @ 450mm C/C along the perimeter of wall including taking down existing unserviceable false ceiling.

M&L Water Proofing Treatment on existing RCC Roof with the following Specifications including taking down old treatment and cleaning the roof surface complete all as specified and as directed (a). Priming surfaces and applying normal treatment (for moderate conditions), using glass fibre base bitumen felt grade 2 (except felt) (b). M&L Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq. m over cleaned surface of any description. (c) S&F APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) laid on primed surface by forced application complete all as specified (d) M&L Applying two coats of Aluminium Paint over APP based Polymeric Membrane.

M & L for joint free non-skid/matt finished ceramic colour tiles 600x600, 7 to 8mm thick in floors etc. set and jointed in neat cement slurry and pointed with white or coloured to match with tile laid over and including 15mm thick screed bed in CM (1:6) complete.

M & L for joint free glazed ceramic colour tiles 600x300, 7 to 8mm thick on vertical surfaces of wall such as dados, skirtings etc set and jointed in neat cement slurry and pointed in white cement to match with tiles over and incl 10mm thick screed plaster in CM 1:4, complete all as specified and directed.

S & F solid PVC door frame for moulded shutters of size 100mm x 47mm made out of 5mm wood grain printed PVC sheet & reinforced with M.S. square tube as per specification & drawing complete all as specified and as directed.

S & F factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick 3D wood grain moulded PVC sheet polyurethane painted on the front face & 2mm thick plain colour PVC sheet on back face, complete all as specified and as directed.

S&F in repair Vitreous China White Wash Down Water Closet Pan (Pedestal Pattern) with Trap and Fixing Bolts (excluding Flushing Cistern and Flush Pipe) including connection to drain (or outgoing pipe) and to Flushing Pipe and Making Good to Floor/distrubed surfaces.

S&F in repairs PVC low level Flushing Cistern 10 Ltr capacity, Valve less, syphonic action type with Inlet, Ball Valve, Float and handle, complete all as specified and as directed.

S&F in repairs Vitreous China Wash Hand Basin of size 550x400mm (Flat Back or Angle Back type) with pedestal including 32mm bore (dia) Brass Chromium plated Waste Fitting, a pair of Erecting Stand complete all as specified and as directed.

S & F in repairs rotational moulded synthetic (HDPE), water storage tank 1000 litre capacity (cylindrical vertical with closed top,) hoisted & fixed in position, complete all as directed.

M & L 75mm thick PCC 1:3:6 Type C2 using 40mm graded aggregate as in plinth protection/path incl demolition of existing cement concrete complete all as specified and as directed.

S&F in repair PVC (SWR) 75mm bore (dia) Soil, Waste and Ventilating Pipe, Singe Socketed, in any length with Rubber Ring Joints with and including all fittings like bend, tee, floor/gully trap. or junction etc fixed to Walls or laid in floors complete all as directed.

S&F in repairs PVC (SWR) 110mm bore (dia) Soil, Waste and Ventilating Pipe, Singe Socketed, in any length with Rubber Ring Joints with and including all fittings like bend, tee, floor/gully trap. or junction etc fixed to Walls or laid in floors, complete all as directed.

S&F in repair for PVC (SWR) Gully Trap 125/110mm,setting and jointed with Solvent Cement, complete all as specified and as directed.

S&F PTMT Grating Doom 125mm dia (minimum weight 40 Grams) and fixed-in-repairs, complete all as specified and as directed.

S&F in repair, Sheet Glass Shelf Assembly, consisting of 5.5mm thick Sheet Glass Shelf 12 Cm Wide with Chromium plated Bracket Guard and Railing 60 Cm long, complete all as specified and as directed.

S & F in repair PVC connection, heavy duty15 mm bore, 45 cm long with 2 Nos PTMT nuts of approved quality complete all as specified and directed.

S & F in repair tubular towel rail , chromium plated brass 20mm dia ‘D’ type 60 cm long between flanges complete all as specified and directed.

S&F in repair 15 mm bore pillar taps, fancy type, cast copper alloy, CP with long screwed shanks and fly nuts screwed for iron pipe

S&F in repair angular stop Cock with Wall Flange of complete as all specified and as directed.

S&F sheet glass 4 mm thick, plain/tinted or pin headed (as directed) and glazing in aluminium, wooden or metal frame work, complete all as specified and as directed.

S&F 12mm thick prelaminated particle board interior grade, both side decorative choice lamination fixed with panels including necessary jointing cleats, glazing clips, rubber gusket, anodised aluminium snap beading screws holdfasts etc all complete as specified and as directed.

M&L for Powder Coating (minimum thickness of powder coating 50 micron) anodised aluminium frame for doors/windows/ventilator or partition with one or more rebates with U clips and joining cleats complete as specified and as directed.

M&L for Powder Coating (minimum thickness of powder coating 50 micron) anodised aluminium door shutters, aluminium sections weighing 0.55 kg/m with and including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, powder coated aluminium fittings such as, aluminium hinges type B-21, 100mm, fancy type aluminium handles two nos each shutter & hydraulic door closer etc complete as specified and as directed.

M&L for Powder Coating (minimum thickness of powder coating 50 micron) anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m with and including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as, peg stays 150mm, hinges type B-21, 100mm, suitable handles etc complete as specified and as directed.

S&F in repair 2 way Bib Cock (Foam Flow) with Flange of complete as all specified and as directed.

Dismantling loose/disintegrated portion of RCC Chajjas, bends shelves, beams balconies and similar work at any position or any height and doubing out with PCC 1:1.5:3, 15mm to 50mm thick using 6 to 12mm graded stone aggregate to make up and finished required shape including applying anti corrisove paint on exposed surfaced and provision of necessary supports form work and including 10mm thick plastering in CM 1:4, finished fair and even, complete all as specified and directed.

S & F in repair health faucet with 1 mtr long long easy flex tube in chrom finish & wall hook all as specified & directed.

S&F in repair CP jet spray with holder for EWC,1.5m long, complete all as specified and directed.

S & F in repair new flxible PVC waste pipe of approved quality 32 mm bore, 75 cm long with one end socketed fixed to waste coupling including one PVC reducer 32mm complete all as specified and directed

S&F in repair 2 way angular stop Cock with Wall Flange of suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed.

S&F sensor operated (Senso Art) vitreous China Urinal, Half stall type hindware cat No 60018 or equivalent make of size not less than 370 x 390 x 610 mm, white with and including provn of sensor with battery, Spreader frog and connecting pipe complete all as specified.

S&F nylon HDPE bird proofing net of 2cm pitch or as directed by Engr-in-Charge. The work shall be executed at height upto and including 15.00 mtrs. Rates quoted by the contractor shall deemed to inclusive of necessary scaffolding and all other fittings and binding materials as required for fixing of the net completed all as directed.

S&F in repair CP Soap Dish holder complete all as specified and directed.

M&L for applying silicon based paste with gun as in holes of bolt/screws/nails etc as in roofing of RMP/GI sheets to arrest the water leakage complete including cleaning and removal of old deposit material all as specified.

M&L for repair and easing of hanger shutter sliding mechanism by taking down and re-fixing of the existing shutters and replacement of roller wheel and other defective parts complete all as required and directed at site.

Supply & laying Steel Water Tubing 15mm bore (dia), Galvanised, ‘medium grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other situation, including taking up/down existing water tubing complete as all specified and as directed.

Supply & laying Steel Water Tubing 20mm bore (dia), Galvanised, ‘medium grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other situation, including taking up/down existing water tubing complete as all specified and as directed.

S&F for 100mm size stainless steel butt hinges all as specified and directed.

S & F Aluminium anodised tower bolt 150 mm size.

S&F Aluminium anodised handle 150 mm size of extruded section

M & L for preparation of new steel surfaces and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as directed.

M&L preparation of old painted CGI/PGI steel roof sheets and other surfaces, over 10cm in with or girth and applying one coat of synthetic enamel roof paint complete all as specified and directed.

S&F in repairs 1.60 mm thick Mild steel, plain, black sheet in wall cladding, steel gates & similar work, cut to size, holes punched; including rounded headed screws, clout nails or rivets & fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams including bending or turning up, mitred angles, etc. as required

M&L for preparation of old decorated plastered wall surface applying two coats of oil bound distemper over a coat of 1.5mm thick wall care putty all as specified and directed.

M&L for preparation of old decorated plastered wall surface applying one coat of cement base paint all as specified and directed.

M&L 2 mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof including taking down old, complete all as specified and as directed

S&F 0.36 mm dia stainless steel wire gauge and average width of apperture 1.4 mm w i t h stainless steel wire staples all as specified.

Excavation in trenches n.exc 1.50 m wide and n.exc 1.50 m in depth for foundationllaying or taking out of LT UG Cable in soft/loose soil and getting out complete all as specified.

M&L for Cutting into existing manholes 100mm dia of internal pipe for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required

M&L concrete bed to drain pipes incl packing under and haunching against the sides of pipes after they are laid and tested in cement concrete (1:3:6) type C2 (using 40 mm graded aggregate) complete all as specified and directed.

S&F 100 mm internal dia of pipe salt glazed stoneware drain pipes laid in trenches and jointed complete all as specified.

M&L Reinforced precast cement concrete (1:2:4) type B1 (using 20 mm graded aggregate) as in manhole cover slab and set in CM (1:4) complete all as specified and directed.

M&L for MS bars 8 mm dia TMT bars cut to length, bent to shape required incl cranking, bending etc complete all as specified and directed.

Returning, filling in including spreading levelling, watering and well ramming in hard dense soil complete all as specified and directed.

Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.50m complete all as specified.

M&L for Soakage wells of size 1.8m dia and 3m of effective depth excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size n. exc 150mm complete all as specified and directed.

Taking down carefully Copper/Aluminium Point Wiring (Light, Fan, Socket or Power)complete including fittings such as switches, ceiling roses, pendents, sockets, boxes, light fitting etc and removing from site and making good disturbed surfaces of walls, floors etc complete all as specified and as directed.

Taking down existing unserviceable Highbay light/Flood light of any description/type/size carefully from hanger ceiling height of 18 mtr , batten/conduit including removal of batten/conduit/gutties/wooden boards complete all as specified and directed.

Taking out/down burnt/unserviceable Main Switches, DB's, Bus-bars Chambers including all Fittings & Fixtures, etc. from existing Main Board and making good disturbed surfaces of Walls, Ceiling, etc. so as to match the existing Finishes, complete all as specified and as directed. NOTE : Quoted Unit Rate against DB's will deemed to be included for taking out/ down of MCB SP/SPN/ TPN.

Taking down old unserviceable/burnt Submain Wiring with copper /aluminum conductor PVC insulated cable of any size drawn through PVC Casing Caping/Conduit including GI Wire Accessories etc. and making good disturbed surfaces of Walls, Ceiling, etc. so as to match the existing Finishes, complete all as specified and as directed.

Taking down/out unserviceable UG Cables of any Cross Sectional Area and Connections and joints including Pipes, Bricks, etc of any description laying in trenches or fixing with Walls/Poles, segreating serviceable Bricks/Precast covers, Pipes, Cables etc, and keep in safe custody for reuse, complete all as specified and as directed. NOTE: Earthwork will be measured and paid under appropriate Items.

M&L for Point Wiring with PVC insulated and unsheathed multistranded Flame Retardant low smoke (FRLSH) Copper Conductor single core 1.5 Sqmm(nominal area) cable using approved colour code as per IS drawing in and including pvc concealed conduit (ISI marked) with all accessories of suitable size suitable size , high grade ISI marked in walls/roof and PVC boxes of suitable size including fixing/grouting PVC board as per site requirement for mounting the switches/sockets/regulators etc including running up of 1.5sqmm copper conductor FRLSH PVC insulated cable as earth continuity conductor along with wiring and connecting connected to Common Earth and Earth dolly for for One Light Poin controlled by One 1-Way Switch 5 Amp, complete all as specified and as directed.

All as per Item no. 71 but for One ceiling fan/exhaust fan point controlled by one switch and regulator , complete all as specified and as directed.

All as per Item no. 71 but for One 3pin Socket Outlet 5amp Point on the Same Board with other switches, complete all as specified and as directed.

All as per Item no. 71 but for One 3pin Socket Outlet Point controlled by one switch on the Independent Board, complete all as specified and as directed.

All as per item no. 71 here in before but with two run of 4.00sqmm multistranded single core copper conductor 1100 volts grade FRLSH PVC insulated sheathed cable with one run of FRLSH PVC 4.00sqmm multistranded insulated sheathed copper wire as earth continuity conductor alongwith wiring and connecting to the common eath dolly on independent board complete all as specified and directed.

S&F Switch Piano, Flush type(ISI marked), Single Pole, 1-Way, 5 Amps, 240 Volt, conforming to IS and connecting up, complete all as specified and as directed.

S&F Socket Outlet, 2-in-1,3 Pin,5 Amp, 230 Volt, conforming to IS and connecting up, complete all as specified and as directed.

S&F switch Socket Combination 2-in-1, Flush type, multi-purpose, 2/3 Pin, 5 Amp, 230 Volt, conforming to IS and connecting up, complete all as specified and as directed.

S&F switch Socket Combination 2-in-1, Flush type, multi-purpose, 3 Pin, 15 Amp, 230 Volt, conforming to IS and connecting up, complete all as specified and as directed.

S&F Ceiling Rose, Surface Bakelite of size 65x50mm,2to 3 Terminals, AC, 50 Hz, 230 Volt, conforming to IS and connecting up, complete all as specified and as directed.

S&F Electronic fan regulator step type, AC, 230 volt complete all as specified and as directed.

S&F Decorative wall light fixture made up of polycarbonate suitable for 10W LED Lamp complete all as specified and as directed. Make:HAVELLS, LHFOFTE1TZ1W012 OR EQUIVALENT MAKE OF SURYA/CG/BAJAJ/PHILLIPS

S&F Lamp Holder Surface Bakelite with Back Plate insulated body suitable for Batten Fittings and fixed with Wooden Round Block, conforming to IS and connecting up, complete all as specified and as directed.

S & F LED ADORE 10 W B22 CDL 5 STAR LAMP with B 22 base capacity 1200 lumen complete all as specified and as directed..Make-Make- Havells, Cat No: LHLDEUEBML8Z010 or equivalent make of Crompton Greaves/Phillips/Bajaj.

S & F wall mounted LED 18 watts ,Batten type T 5 light fitting, 230 volts with extruded aluminium heat sink provided for efficient heat dissipation and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including Ultra bright LED polycarbonate (T8) tube (Single side connection) 4' x 18 watts with G13 lamp holder complete all as specified and as directed.. Make:Havells, Model -REGALBATTENT5UPTO1X18WDSBSWH For Batten Fitting and Model-PHOTONULTRAE2.01213T8SSTL18WLED865SPC For T8 Tubelight or equivalent make of CG/Bajaj/Phillips.

M&L for Sub-main Wiring with 2-Runs of Single Core 4.0 Sqmm PVC insulated (FRLSH) unsheathed multi-stranded 1100 Volt grade Copper Conductor Cable drawn through and including non metallic PVC rigid conduit, and its Accessories suitable size heavy grade ISI marked including 1-Run of Single Core 4.0 Sqmm PVC insulated insulated unsheathed multi-stranded 1100 Volt grade Copper Conductor Cable as Earth Continuty Conductor along with the Wiring and connected from DB to DB/Main Board, fixed on Walls, Ceilling, etc., complete all as specifed and as directed. NOTE :- (a) Cost of PVC Conduit with all Fittings/Accessories will deem to be included in the Quoted Unit Rate. (b) Cables as mentioned in Schedule ‘A’ Items and 1-Run of PVC Conduit with all Fittings/Accessories will be measured and paid as One Unit. (c) Sub-main Wiring will be measured PVC Conduit only. Wire required for looping, etc as ordered will deem to be included in the Quoted Unit Rate.

M&L for Sub-main Wiring with 2-Runs of Single Core 6.0 Sqmm PVC insulated (FRLSH) unsheathed multi-stranded 1100 Volt grade Copper Conductor Cable drawn through and including non metallic PVC rigid conduit, and its Accessories suitable size heavy grade ISI marked including 1-Run of Single Core 6.0 Sqmm PVC insulated insulated unsheathed multi-stranded 1100 Volt grade Copper Conductor Cable as Earth Continuty Conductor along with the Wiring and connected from DB to DB/Main Board, fixed on Walls, Ceilling, etc., complete all as specifed and as directed. NOTE :- (a) Cost of PVC Conduit with all Fittings/Accessories will deem to be included in the Quoted Unit Rate. (b) Cables as mentioned in Schedule ‘A’ Items and 1-Run of PVC Conduit with all Fittings/Accessories will be measured and paid as One Unit. (c) Sub-main Wiring will be measured PVC Conduit only. Wire required for looping, etc as ordered will deem to be included in the Quoted Unit Rate.

M&L for Sub-main Wiring with 4-Runs of Single Core 10.0 Sqmm PVC insulated (FRLSH) unsheathed multi-stranded 1100 Volt grade Copper Conductor Cable drawn through and including non metallic PVC concealed rigid conduit, and its Accessories suitable size heavy grade ISI marked including 2-Run of Single Core 10.0 Sqmm PVC insulated insulated unsheathed multi-stranded 1100 Volt grade Copper Conductor Cable as Earth Continuty Conductor along with the Wiring and connected from DB to DB/Main Board, fixed on Walls, Ceilling, etc., complete all as specifed and as directed. NOTE :- (a) Cost of PVC Conduit with all Fittings/Accessories will deem to be included in the Quoted Unit Rate. (b) Cables as mentioned in Schedule ‘A’ Items and 1-Run of PVC Conduit with all Fittings/Accessories will be measured and paid as One Unit. (c) Sub-main Wiring will be measured PVC Conduit only. Wire required for looping, etc as ordered will deem to be included in the Quoted Unit Rate.

S & F sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system complete all as specified and as directed.

S&F 32A, 5pin(3P+N+E) Metal plug & socket enclosure for three phase connection complete all as specified and directed. Make: L&T, Model-DBPPS532SD or equivalent make of Schneider/Legrand

S&F MCB TPN, 60-100 Amp, 415 Volt suitable for fixing on MCB DB’s and connecting up, complete all as specified and as directed. Make:L&T, Cat No. DBVTH006SD or equivalent in Legrand/Indo Asian.

S&F sheet metal enclosure with socket,plug top and MCBs Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20Amp,240 volt complete all as specified and as directed.

S & F sheet metal enclosure MCB VTPN 6 way Double door Ready to use DBs - Provided with insulated vertical phase bus-bars/neutral bars with shrouds / earth bars / sticking saddles / cement spill protector/ color-coded interconnecting wire set / cable ties / blanking plates and circuit identification labels With provision for 4 Pole MCCB 250 A as incomer and SP/SPN MCBs as outgoing complete all as specified and directed. Make:L&T, Model no. DBVTH006SD OR Equivalent make of Schneider/Legrand/Indo Asian

S & F MCB SPN 32 Amps 240 Volt, confirms to IS/IEC 60898 Braeking Capacity of 10 kA, complete all as specified and directed. Make- L&T, Cat No: BB20250B or equivalent in Schneider/ Legrand.

S&F MCB SP, 240 volts, 6 to 32 Amps 50 Hz ,confirms to IS/IEC 60898 Breaking Capacity of 10 kA, complete all as specified and directed. Make -L&T,Model No-BB10200B/Schneider/ Legrand.

S&F MCCB 4 pole 160 Amp, thermal magnetic type DN2-250D with breaking capacity 36 KA with thermal magnetic release at 415 volts, including spreader terminal complete all as specified and as directed. Make:L&T, Cat part No. CM9210800M10G and equivalent make of Legrand/Havells.

Supply & laying LT UG XLPE sheathed PVC insulated, screened PVC bedded, Galvanised Steel Strip of Wire armoured Electric Power Cable heavy duty with stranded Aluminium Conductor 1100 Volt grade, cross-sectional area 70 Sqmm 3.5 Core, laid in trenches/surface of Wall/in GI Pipe along with Pole for connection to OH Lines/Main switch/MCCB, including Brass Cable Glands Mild Steel Flat Iron Clamps, etc. and Testing, complete all as specified and as directed. NOTE : Earthworks, Sand Cushioning, Bricks, GI Pipe, etc. will be measured and paid under appropriate Items.

Supply & laying locally available, well burnt Sub-class ‘B’ Bricks, laying perpandicular to UG Cable laid in trenches over Sand Cushion as Cable Protection, complete all as specified and as directed..

M&L Sand Cushioning (dry) in trenches/ducts for protection of UG Cables (below, above and around the UG Cable laid in Trenches) of 230mm Spread thickness (8 Cm in depth before laying the Cable and 15 Cm in depth after laying the Cable) and consolidated (punned) upto 180mm thickness, complete all as specified and as directed NOTE : For the purpose of Payment, Punned thickness of Sand Cushioning only will be measured and paid for.

S&F Galvanised Iron Pipe 40mm bore (dia), Light grade as in protection of UG Cable laid in Trenches/fixing with Poles with Mild Steel Flat Iron Clamps, complete all as specified and as directed. NOTE: Cost of Mild Steel Clamp, Nuts, Bolts and painting is deemed to be included in the QUOTED UNIT RATE.

S&F Reccess mounted Environmrntal friendly,aesthetically designed, ultra modern 2X2 luminaire 28 watt with high brightness SMD LED as light source suitable for Armstrong/grid ceiling, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including suitable LED driver complete all as specified and directed. Make: Havells, PLUTO NEO PANEL 2X2 PLUTONEO2X2PLR28WLED840S or Equivalent make of CG/Bajaj/Phillips/surya

M&L Earthing with Galvanised Steel Earth Plate Electrode 600x600x6mm, buried directly in ground vertically to a depth not less than 2.25 Metre below Ground Level with Top Edge of Earth Plate at depth not less than 1.50 Metre below normal Ground Level, connected to Galvanised Earth Lead Wire 4.0 mm dia by means of Bolts, Nuts, Check Nuts and Washers of GI or Steel and Earth Wire protected with and including GI Pipe 15mm bore (dia) ‘light grade’ upto 1.0 Metre above the Floor Level of Building where Main Switch/DB situated, Earth Plate surrounded by a packed thickness of Char Coal or Coke Dust mixed with Common Salt in alternate layers of not exc 150mm thick PCC Pit in Cement Concrete 1:3:6 (20 mm graded aggregate) and Pre-cast RCC Cover Slab of size 350x350x50 mm in Cement Concrete 1:2:4 (20mm graded aggregate), reinforced with 8mm dia TMT Bars @ 100mm Centre to Centre in both ways, GI Wire Mesh, Funnel with GI Watering Pipe 20mm bore (dia) ‘medium grade’ including necessary Excavation in Soft/Loose Soil, Returning, Filling in and Removal of surplus Spoil upto a distance of 50.00 Metre and all as shown in Electrical Plate No. 3 of MES Schedule Part-I and Testing on completion, complete all as specified and as directed.

M&L Earthing with Galvanised Steel Earth Plate Electrode 600x600x3.15mm, buried directly in ground vertically to a depth not less than 2.25 Metre below Ground Level with Top Edge of Earth Plate at depth not less than 1.50 Metre below normal Ground Level, connected to Galvanised Earth Strip 32X6mm dia by means of Bolts, Nuts, Check Nuts and Washers of GI or Steel and Earth Wire protected with and including GI Pipe 15mm bore (dia) ‘light grade’ upto 1.0 Metre above the Floor Level of Building where Main Switch/DB situated, Earth Plate surrounded by a packed thickness of Char Coal or Coke Dust mixed with Common Salt in alternate layers of not exc 150mm thick PCC Pit in Cement Concrete 1:3:6 (20 mm graded aggregate) and Pre-cast RCC Cover Slab of size 350x350x50 mm in Cement Concrete 1:2:4 (20mm graded aggregate), reinforced with 8mm dia TMT Bars @ 100mm Centre to Centre in both ways, GI Wire Mesh, Funnel with GI Watering Pipe 20mm bore (dia) ‘medium grade’ including necessary Excavation in Soft/Loose Soil, Returning, Filling in and Removal of surplus Spoil upto a distance of 50.00 Metre and all as shown in Electrical Plate No. 3 of MES Schedule Part-I and Testing on completion, complete all as specified and as directed. Note: Testing to be carried out after completion, if the earth resistnce below 1 ohm is not obtained, earthing shall be renuated at no extra cost till desired earth resistance is obtained.

S & F Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 Flood light fitting luminaire with 100 lumen/W, AC 120-300 volt with high power LEDs as light source and high efficiency electronic driver of capacity 100 watts,12000 lumen with prewired and necessary mounting arrangements and provision of 4.00 sqmm three core flexible multistranded copper conductor cable connected to existing points in hanger beam angle of any description complete all as specified and as directed. Make- Surya,Model No - ORION II, CAT NO. SLE FL 120W IP 66 LMS NEO ORION II Or equivalent make of Havells/Crompton Greaves/Phillips/Bajaj.

S&F LEDs aviation light energy saving new generation environmental friendly long life versatile pressure die cast aluminium housing with polycarbonate enclosure with prewired and necessary mounting arrangements,provision of new 3 core multistranded copper conductor of size 23/0.193 and for fixing GI pipe medium grade 40mm dia 1,5mtr long, complete all as specified and directed. Make: Bajaj, cat no. 110731 or equivalent make of Havells/Phillips.

Taking up or down Galvanised Steel Tubing 25mm bore (dia) including Connections and Fittings from Trenches, Walls, Floors, etc., complete all as specified and as directed.

S&F 25 mm dia GI tubing medium grade galvanised with all fittings and laid in trenches/pillars on wall etccomplete all as specified and as directed.

S&F 25mm bore, Gun-metal globe (class 2) or Gate valves(brass insert), with iron wheel head, screwed both ends for iron pipe and fixed, complete all specified and as directed.

M&L for cutting of existing CI pipe laid 80mm dia for inserting Tees for new connection of 80mm X50mm dia complete all as sprcified and directed.

M&L for connection pieces for inserting 25mm GI pipe into 50mm distribution mains complete all as specified and directed.

S&F Aluminium strip 25X3.15mm buried in ground/fix with saddle and screws etc for proof and on wall as earth continuity conductor complete all specified and directed.

S&F Air termination, single pointed, copper rod 12mm dia and 300mm long complete fixed with brazing complete all specified and directed.

S&F Test point terminal block made of gun metal or Phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw complete all specified and directed.

S&F wooden/Plastic pully for fixing/grouting in wall for running AL strip complete all as specified and directed.

M/S RANA ENGINEERING ENTERPRISE

Saraswati Auto Works