Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹18.4 LAccepted-AOC | L-1 | Accepted-AOC Over all rates are reasonable and lowest. | |
| 2 | L-2₹18.7 L+₹8,694 (0.47%)Rejected-Finance | L-2 | Rejected-Finance Over all rates are higher than L-1. | |
| 3 | L-3₹19.5 L+₹89,438 (4.82%)Rejected-Finance 121 GURU GOVIND SINGH MARG LAL KUAN LUCKNOW UTTAR PRADESH 226001 | LUCKNOW | UTTAR PRADESH | 226001 | L-3 | Rejected-Finance Over all rates are higher than L-1. |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
8 Nov 2019, 6:00 pmClosed
Garrison Engineer, Air Force, Izatnagar, Bareilly
Garrison Engineer, Air Force, Izatnagar, Bareilly, 243002
REPAIR, MAINTENANCE AND POLISHING TO WOODEN FURNITURE AT AF STATION BAREILLY AND BHOWALI UNDER GE (AF) IZATNAGAR, BAREILLY.
2019_MES_288617_1
8492 / E8
Open Tender
Civil Works - Others
Item Rate
335 days
Izatnagar
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Garrison Engineer, Air Force
₹40,000
Yes
3 Jan 2020
10 Oct 2019
9 Nov 2019
10 Oct 2019
8 Nov 2019
24 Oct 2019
10 Oct 2019 - 24 Oct 2019
Amount
Chair Dining FD-1105/279 S & F of new components of chair dinning made of 1st class hardwood (Shisham) including dismantling of old unservicable one complete all as specified, directed and shown on drawings: -
(a) Rear leg
(b) Front leg
(c) Rear / front / side rail
(d) Stiffener
(e) Back rest
(f) M & L for recanning of Chair dining in 'Godrej' pattern with 2 mm wide & 0.6 mm thick for centre portion and 4 mm wide plastic cane for borders including dismantling of old unserviceable one complete all as specified, directed and shown on drawings.
(g) M & L for preparation of sufaces by throughly rubbing with emery paper, applying raw / burnt seina uniformly and polishing one or more coats with french polish to obtain a glossy finish with and including fixing of 4 Nos. nylon buffers at the bottom of the chairs complete all as specified, directed and shown on drawings.
Chair Easy FD-1108/229 S & F of new components of chair easy made of 1st class hardwood (Shisham) including dismantling of old unservicable one complete all as specified, directed and shown on drawings: -
(a) Rear leg
(b) Front leg
(d) Front / back / Side rail of seat to match with the existing.
(e) M & L for recanning of the seat & back of chair easy in 'Godrej' pattern with 2 mm wide & 0.6 mm thick for centre portion and 4 mm wide plastic cane for borders including dismantling of old unserviceable one complete all as specified, directed and shown on drawings.
(f) M & L for preparation of sufaces by throughly rubbing with emery paper, applying raw / burnt seina uniformly and polishing one or more coats with french polish to obtain a glossy finish with and including fixing of 4 Nos. nylon buffers at the bottom of the chairs complete all as specified, directed and shown on drawings.
Chair Writing FD-202/ 250/280 S & F of new components of chair writing made of 1st class hardwood (Shisham) including dismantling of old unservicable one complete all as specified, directed and shown on drawings: -
(a) Rear leg
(b) Front leg
(c) Rear / front / Side rail
(e) Back rest
(f) Stiffener
(g) M & L for recanning of the seat & back of chair writing in 'Godrej' pattern with 2 mm wide & 0.6 mm thick for centre portion and 4 mm wide plastic cane for borders including dismantling of old unserviceable one complete all as specified, directed and shown on drawings.
(h) M & L for preparation of sufaces by throughly rubbing with emery paper, applying raw / burnt seina uniformly and polishing one or more coats with french polish to obtain a glossy finish with and including fixing of 4 Nos. nylon buffers at the bottom of the chairs complete all as specified, directed and shown on drawings.
Sofa Set 4/5 Seater FD-281 S & F of new components of Sofa Set 4 / 5 Seater made of 1st class hardwood (Shisham) including dismantling of old unservicable one complete all as specified, directed and shown on drawings: -
(a) Front Leg
(b) Rear leg
(c) Batten
(d) Back rail (3 seater)
(e) Front rail (3 seater)
(f) Back rail (single seater)
(g) Front rail (single seater)
(h) Hand rest
(j) M & L for providing new cushion of 32 density cool foam of size 560 x 530 x 100 mm thick complete all as specified and directed.
(k) M & L for providing new tapestry cloth cover for seat foam and back foam of sofa sets of approved shade & quality with zip on one side of cover for easy removing / closing purposes etc to cover the foam of size 560 x 530 x 100 mm thick complete all specified and directed. NOTE: Cost of tapestry cloth shall not be less than Rs. 250.00 per running metre.
(l) M & L for preparation of sufaces of the complete set of sofa set four seater by throughly rubbing with emery paper, applying raw / burnt seina uniformly and polishing with french polish one or more coat to obtain a glossy finish complete all as specified and directed.
(m) M & L for preparation of sufaces of the complete set of sofa set five seater by throughly rubbing with emery paper, applying raw / burnt seina uniformly and polishing with french polish one or more coat to obtain a glossy finish complete all as specified and directed.
Chair dinning cushioned FD/E6/MAP/10 (R) S & F of new components of chair dinning cushioned made of 1st class hardwood (Shisham) including dismantling of old unservicable one complete all as specified, directed and shown on drawings: -
(a) Rear leg
(b) Front leg
(c) Side/back/front rail
(d) Stiffener
(e) M & L for providing 75 mm thick new cushion of appropriate size of 32 density cool foam duly covered with tapestry cloth and fixed with 12 mm thick plywood sheet complete with dismantling of old unserviceable one. NOTE: - Cost of tapestry cloth shall not be less than Rs. 250.00 per RM and shall be as per sample held with GE.
(f) M & L for providing new tapestry cloth cover for cushion of approved shade & quality as per sample held with GE to cover the foam of appropriate size and dismantling of old one. NOTE: - Cost of tapestry cloth shall not be less than Rs. 250.00 per RM.
(g) M & L for preparation of sufaces of chair dinning cushioned by throughly rubbing with emery paper, applying raw / burnt seina uniformly from chair dinning cushioned and polishing with french polish one or more coat to obtain a glossy finish complete all as specified and directed.
Bed plywood top (FD-245 & FD-246) S & F of following new components of Bed plywood top comprising outer member made of shisham wood and internal frame made of cheer wood, covered both sides of board with 3.5 mm thick one side teakwood finish plywood with 12 mm thick half cut teakwood beading including dismantling of old unservicable one complete all as specified, directed and shown on drawings: -
(a) Head board
(b) Foot board
(c) S & F of the following new components of Bed plywood top made of 1st class hardwood (Shisham) including dismantling of old unservicable one complete all as specified, directed and shown on drawings: - (i) Long rail of size 90 x 35 mm
(ii) Stiffner of size 60 x 40 mm
(iii) Wooden bracket
(d) S & F of top of Bed plywood top made of 12 mm BWR grade phenol bonded commercial plywood with suitable screws including dismantling of old unservicable one complete all as specified, directed and shown on drawings.
(e) M & L for preparation of the surface of Bed plywood top by throughly rubbing with emery paper both surfaces of the head board, foot board including legs and long rails and polishing with french polish one or more coat to obtain a glossy finish complete all as specified and directed.
Table dinning for 08 persons {FD-30(M)/ 273 & 239} S & F of new components of Table Dinning 08 Persons made of 1st class hardwood (Shisham) including dismantling of old unservicable one complete all as specified, directed and shown on drawings: -
(b) Top rail (long/front)
(c) Top rail (short/side)
(d) Top made of 18 mm thick pre-laminated particle board one side laminated alongwith 4 mm thick teakwood beading including dismantling of old unserviceable one complete all as specified and directed.
(e) M & L for preparation of surfaces with sand / emery paper and applying french polish one or more coat of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with bee's wax complete all as specified and as directed.
Table dinning for 06 persons (FD-30(M)/ 273 & 239) S & F of new components of Table Dinning 06 Persons made of 1st class hardwood (Shisham) including dismantling of old unservicable one complete all as specified, directed and shown on drawings: -
(b) Top rail (long/front)
(c) Top rail (short/side)
(d) Top made of 18 mm thick pre-laminated particle board one side laminated alongwith 4 mm thick teakwood beading including dismantling of old unserviceable one complete all as specified and directed.
(e) M & L for preparation of surfaces with sand / emery paper and applying french polish one or more coat of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with bee's wax complete all as specified and as directed.
Teapoy (FD-382/ 232 & 278) S & F of new components of Teapoy made of 1st class hardwood (Shisham) including dismantling of old unservicable one complete all as specified, directed and shown on drawings: -
(b) Top rail (long/front)
(c) Top rail (short/side)
(d) Top made of 18 mm thick pre-laminated particle board one side laminated alongwith 4 mm thick teakwood beading including dismantling of old unserviceable one complete all as specified and directed.
(e) M & L for preparation of surfaces with sand / emery paper and applying french polish one or more coat of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with bee's wax complete all as specified and as directed.
Table centre FD-274 & 235 S & F of new components of Table Centre made of 1st class hardwood (Shisham) including dismantling of old unservicable one complete all as specified, directed and shown on drawings: -
(b) Top rail (long/front)
(c) Top rail (short/side)
(d) Top made of 18 mm thick pre-laminated particle board one side laminated alongwith 4 mm thick teakwood beading including dismantling of old unserviceable one complete all as specified and directed.
(e) M & L for preparation of surfaces with sand / emery paper and applying french polish one or more coat of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with bee's wax complete all as specified and as directed.
Table Peg (FD- 277 & 236/384) S & F of new components of Table Peg made of 1st class hardwood (Shisham) including dismantling of old unservicable one complete all as specified, directed and shown on drawings: -
(b) Top rail (long/front)
(c) Top rail (short/side)
(d) Top made of 18 mm thick pre-laminated particle board one side laminated alongwith 4 mm thick teakwood beading including dismantling of old unserviceable one complete all as specified and directed.
(e) M & L for preparation of surfaces with sand / emery paper and applying french polish one or more coat of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with bee's wax complete all as specified and as directed.
Table 900 x 600 mm with / without drawer FD- 223 & 224 S & F of new components of Table 900 x 600 mm made of 1st class hardwood (Shisham) including dismantling of old unservicable one complete all as specified, directed and shown on drawings: -
(b) Top rail (long/front)
(c) Top rail (short/side)
(d) Top made of 18 mm thick pre-laminated particle board one side laminated alongwith 4 mm thick teakwood beading including dismantling of old unserviceable one complete all as specified and directed.
(e) Drawer made of 12 mm thick commercial plywood and front side made of 18 mm thick pre-laminated particle board one side laminated finish including provision of knob completed all as specified, directed and shown on drawings.
(f) M & L for preparation of surfaces with sand / emery paper and applying french polish one or more coat of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with bee's wax complete all as specified and as directed.
Table 900 x 900 x 760 mm FD-273 S & F of new components of Table 900 x 600 x 760 mm made of 1st class hardwood (Shisham) including dismantling of old unservicable one complete all as specified, directed and shown on drawings: -
(b) Top rail (long/front)
(c) Top made of 18 mm thick pre-laminated particle board one side laminated alongwith 4 mm thick teakwood beading including dismantling of old unserviceable one complete all as specified and directed.
(d) M & L for preparation of surfaces with sand / emery paper and applying french polish one or more coat of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with bee's wax complete all as specified and as directed.
Side board FD-372
(a) S & F of door shutters (both) made of 18 mm thick Pre-laminated particle board exterior grade duly providing 6 mm thick teak wood beading all round with fittings and fixtures including dismantling of old unserviceable one complete all as specified, directed and shown on drawings. NOTE: - All fittings and fixtures shall be of approved size and quality as per existing.
(b) S & F of the front portion of drawer as to match with the existing made out of 18 mm thick Pre-laminated particle board with laminated finish and knob including dismantling of old unserviceable one complete all as specified, directed and shown on drawings.
(c) S & F of Top made of 18 mm thick pre-laminated particle board one side laminated alongwith 4 mm thick teakwood beading including dismantling of old unserviceable one complete all as specified and directed.
(d) S & F of 3.4 mm thick one side teak face plywood on sides (both) including dismantling of old unserviceable one complete all as specified and directed.
(e) S & F of Back made of 6 mm thick commercial ply wood including dismantling of old unserviceable one complete all as specified and directed.
(f) M & L for preparation of surfaces with sand / emery paper and applying french polish one or more coat of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with bee's wax complete all as specified and as directed.
Table writing (FD-249 & 275)
(a) S & F of Top made of 18 mm thick pre-laminated particle board one side laminated finish duly providing 4 mm thick teak wood beading all around including dismantling of old unserviceable one complete all as specified, directed and shown on drawings.
(b) S & F of new leg made of 1st class hardwood (Shisham) including dismantling of old unservicable one complete all as specified, directed and shown on drawings.
(c) S & F of new leg (Short) made of 1st class hardwood (Shisham) including dismantling of old unservicable one complete all as specified, directed and shown on drawings.
(d) S & F of new side / bottom rail made of 1st class hardwood (Shisham) including dismantling of old unservicable one complete all as specified, directed and shown on drawings.
(e) S & F of new Back made of 6 mm thick plywood commercial type including dismantling of old unserviceable one complete all as specified, directed and shown on drawings.
(f) S & F of Side made of 18 mm thick particle board one side laminated finish including dismantling of old unserviceable one complete all as specified, directed and shown on drawings.
(g) S & F of new stiffner made of 1st class hardwood (Shisham) including dismantling of old unservicable one complete all as specified, directed and shown on drawings.
(h) S & F of new Drawer made out of 18 mm thick particle board one side laminated finish including provision of knob and dismantling of old unserviceable one complete all as specified, directed and shown on drawings. NOTE: - All fittings and fixtures shall be of approved size and quality as per existing.
(j) M & L for providing complete cupboard of table writing made of 18 mm thick pre-laminated particle board including back provided with 6 mm thick commercial plywood including dismantling of old unserviceable one complete all as specified, directed and shown on drawings. NOTE: - All fittings and fixtures shall be of approved size and quality as per existing.
(k) M & L for preparation of surfaces with sand / emery paper and applying french polish one or more coat of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with bee's wax complete all as specified and as directed.
Table Dressing Gents with mirror (FD-230)
(a) S & F of new Looking mirror with frame of 5 mm thick of appropriate size with frame along with 6 mm thick commercial plywood back of the mirror and minor repairs including dismantling of old unserviceable one complete all as specified, directed and shown on drawings.
(b) S & F of new Drawer made of 12 mm thick commercial plywood and front side made of 18 mm thick pre-laminated particle board one side laminated finish and provision of knob including dismantling of old unserviceable one complete all as specified, directed and shown on drawings.
(c) M & L for preparation of surfaces with sand / emery paper and applying french polish one or more coat of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with bee's wax complete all as specified and as directed.
Table Dressing Ladies with mirror FD-251
(a) S & F of new Looking mirror with frame of 5 mm thick of appropriate size with frame along with 6 mm thick commercial plywood back of the mirror and minor repairs including dismantling of old unserviceable one complete all as specified, directed and shown on drawings.
(b) S & F of new Drawer made of 12 mm thick commercial plywood and front side made of 18 mm thick pre-laminated particle board one side laminated finish and provision of knob including dismantling of old unserviceable one complete all as specified, directed and shown on drawings.
(c) M & L for preparation of surfaces with sand / emery paper and applying french polish one or more coat of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with bee's wax complete all as specified and as directed.
Hat Stand (FD-361/362)
(a) S & F of Teak Ply of appropriate thickness as per drawing to make front side including dismantling of old unserviceable one complete all as specified, directed and shown on drawings.
(b) S & F of Board commercial plywood including dismantling unserviceable one complete all as specified, directed and shown on drawings.
(c) S & F of brass Pegs including dismantling of old unserviceable one complete all as specified, directed and shown on drawings.
(d) S & F of 5 mm thick looking mirror with edging including dismantling of old unserviceable one complete all as specified, directed and shown on drawings.
(e) M & L for preparation of surfaces with sand / emery paper and applying french polish one or more coat of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with bee's wax complete all as specified and as directed.
Table Bed Side (FD-276)
(a) S & F of Top made of 18 mm thick pre-laminated particle board one side laminated finish duly providing 4 mm thick teak wood beading all around including dismantling of old unserviceable one complete all as specified, directed and shown on drawings.
(b) S & F of Side made of 18 mm thick particle board one side laminated finish including dismantling of old unserviceable one complete all as specified, directed and shown on drawings.
(c) S & F of new Back made of 6 mm thick plywood commercial type including dismantling of old unserviceable one complete all as specified, directed and shown on drawings.
(d) M & L for preparation of surfaces with sand / emery paper and applying french polish one or more coat of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with bee's wax complete all as specified and as directed.
M/s M K Enterprises
JAISWAL ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .