REPAIR TO JOINARY, SANITARY FITTING, FLOOR DADO, REPAIR TO CGI SHEET, ROOFING AND CEILING INCLUDING OTHER MISC B/R WORKS AT DIBER FIELD STATION PITHORAGARH.

Amount

Contract details

Demolition of brick work, PCC Block or stone/boulder masonary built in cement mortar/lime mortar including all quoins, arches, pillars etc complete all as specified & directed.

M & L precast cement concrete Block Masonary with solid blocks type C1 1:3:6 20mm graded stone aggregate exc 10cm in width and setting in mortar 1:6 complete all as specified and directed .

Demolition of cement concrete of any description and in any position not otherwise described or specifically provided for complete all as specified & directed.

M & L for PCC 1:4:8, type D-2 (using 40mm graded stone aggregate) as in Sub base of paving/ hardstandings, foundation filling and mass concretes, sub base of floor etc complete all as specified & directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc complete all as specified and as directed

M & L PCC 1:2:4 type B-1 (using 20 mm graded agg) as in coping, kerbs etc. Complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position complete all as specified & directed.

M & L for precast cement concrete 1:2:4, type B-1 (using 20mm graded stone aggregate) as in man hole covers, shelves, chajjas etc and similar articles with plain faces, set in CM 1:4 complete all as specified & directed.

S & F mild steel TMT bars 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia complete all as specified & directed.

S & F mild steel TMT bars 6 to 8 mm dia, cut to length bent to shape required, including cranking, bending, spirally, hooking ends and binding with and including MS wire (annealed) not less than 0.90 mm dia complete all as specified & directed.

Use & waste for form work for soffit/ edges of slabs, shelves,chajjas etc. complete all as specified & directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises complete all as specified & directed.

M & L for non skid ceramic coloured tiles 7-8 mm thick (Square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm as in floors, set and jointed in neat cement slurry and pointed with white or colour cement to match over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified & directed

M & L for non skid joint free ceramic coloured tiles of size 7-8 mm thick (Square/rectangular) area of each tile exc. 0.11 Sqm but n.exc. 0.18 Sqm as in floors surface, set and jointed in neat cement slurry and pointed with white or colour cement to match over and including 15mm screed bed or bedding layer in cement mortar 1:6 complete all as specified & directed.

M & L for non skid joint free ceramic coloured tiles of size 7-8 mm thick (Square/rectangular) area of each tile exc. 0.11 Sqm but n.exc. 0.18 Sqm as in vertical surfaces, such as skirting,dados and riser to steps etc set and jointed in neat cement slurry and pointed with white or colour cement to match over and including 10mm thick plaster in CM 1:4 complete all as specified & directed.

Taking down cement plaster of any description from brick,PCC Block or stone walls etc. including raking out of joints, hacking for key, scrubbing down with water etc. complete all as specified & directed.

M & L for 15 mm thick rendering on brick work or concrete surfaces in CM 1:6, surfaces finished even and fair complete all as specified & directed.

M & L for rendering 10mm thick in cm 1:4 as in ceiling finished even & fair complete all as specified & directed.

Dismantling of plain or corrugated steel sheeting any guage, thickness including Nainital or similar pattern roof covering complete all as specified & directed

S & F 0.63mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275gm/sqm, complete all as specified & directed.

S & F steel work as in tubular truss including special shaped washer etc complete using erw or induction butt welded tubes confirming to IS 1161-1979 gde st-240,including gusset plate pole etc complete all as specified & directed .

S & F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165

S & F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n.exc 10 cm long and 16 to 20mm diameter of neck complete all as specified and directed.

Taking down shutters of any description exc. 1 Sqm & n.exc 2 Sqm each complete all as specified & directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) n.exc 1.50 Sqm each complete all as specified & directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.50 Sqm and n.exc 4.00 Sqm each. complete all as specified & directed.

Refixing of shutters of any description exc. 1 Sqm & n.exc 2 Sqm in same opening including taking down, easing and adjusting and also refixing builders hardware as required

M&L for for secend class hard wood 30mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (withoout sash bars) edges of farming plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc.. size of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (a) supplied and fitted chowkats.

S&F 1.25 mm thick Pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. Including frames shall be filled with PCC 1:3:6 complete as specified and as directed.

S&F 1.25 mm thick Pressed steel frames of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. Including frames shall be filled with PCC 1:3:6 complete as specified and as directed.

S&F mild steel work in framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete as specified and as directed.

S & F 35 mm thick second class hard wood glazed and skeleton door shutters (three panels), open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framming plain, chamfered or rounded fitted with cut and mitred beads or securing glass etc, size of members of shutters all as per clause No 8.20 (a) of SSR Part-I (2009).

S & F 30mm thick second class hard wood glazed and skeleton shutters for window/ventilator with sash bars & size of members of shutters as per clause No 8.20 (b) of SSR Part-I (2009).

S & F 30 mm thick flush shutters, solid core construction with block board core and plywood face panels commercial type on both side complete all as specified & directed.

S & F 25 mm thick flush shutters, solid core construction with block board core and plywood face panels commercial type on both side complete all as specified & directed.

M & L solid PVC door frames of size 50mm X 47 made out of 5mm plain colour PVC sheets reinforced with MS Square tube supplying and fixing in openings as per manufacturers instructions.

S & F factory made solid PVC door shutter 30mm thick (style) consisting of frame, made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded wood grain print PVC , ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for tp rail & bottom rail, panelling of wood grain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed to geter with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S & F in repair galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm complete all as specified & directed.

S & F butt hinges 100mm long medium weight, cold rolled, mild steel complete all as specified & directed.

S & F butt hinges 75 mm long, medium weight, cold rolled mild steel complete all as specified & directed.

S & F mild steel handles, oval type, 125 mm long complete all as specified & directed.

S & F mild steel handle, oval type, 100 mm long complete all as specified & directed.

S & F mild steel barrel tower bolt, stove enameled black with bright bolt 200 mm long complete all as specified & directed.

S & F mild steel barrel tower bolt, stove enameled black with bright bolt 100 mm long complete all as specified & directed.

S & F aluminium anodized barrel tower bolts 150mm long, of extruded section complete all as specified & directed.

S & F 300 mm long mild steel sliding door bolt plate type stove enameled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified & directed.

S & F continuous (piano) hinges mild steel, bright finish or electro galvanised complete all as specified & directed.

S & F aluminium handles 125 mm long, cast type, anodized complete all as specified & directed.

S & F 250 mm Aluminium alloy anodised sliding door bolts with hasp,staple(bolt type)and fixing clips of sheet,cast or extruded section and fixing bolts and sliding bolts of extruded section or aluminium alloy and fixed.

S & F stainless steel butt hinges, 100 mm size complete all as specified & directed.

S & F double legged door stopper of allluminium alloy with rubber complete as specified and as directed.

S & F Aluminium sheet 0.56 mm thick fixed with aluminium alloy screw to door shutter all as spd and directed

Dismantling Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets all as spd and directed

Dismantling in repair timber fillets, rails, posts, rafters, purlins etc under 40 Sq cm in section in any position. (unframed work) complete all as specified & directed.

M & L for second class hard wood, plain fillets, square, rectangular or triangular in section, bullnosed, splayed, chamfered or rounded on one face or edge, cross sectional area exc. 3 & n.exc 6 Sqcm complete all as specified & directed

M & L for false ceiling consisting of wall angles, main Tea, cross Tea all of size 25mm x 25mm x 1.4mm thick powder coated GI grid frame work jointed angle as directed and mild steel hooks not less than 4mm dia with arrangement for adjusting heights of ceilling with and incl provision of 4 mm thick E boards sheet in panels of size 600x600 mm size with necessary off cuts and fixing arrangements for ceiling, tube light fitting incl dismantling of existing false ceiling and taking down and refixing of electric fitting carefully complete all as specified & directed.

M & L for 12 to 16 mm thick machine cut pre-polished Udaipur green stone slab flooring on cooking platform/window cill,risers,treads laid over and including 15mm thick screed bed or bedding layer in CM 1:6 and jointed with white cement mixed with pigment to match the shade of slab including rubbing and polishing, bull nose edging/moulding complete all as specified & directed.

S & F 3mm thick figured glass pin headed type, ordinary quality, glazing with oil putty or fixed with wooden beads in steel/wooden windows in squares n.exc 0.50sqm each pane at any floor/hight complete all as specified & directed.

Hacking out old broken glass (any thickness), size quality or description from wooden frames/ steel window complete all as specified & directed

S & F 3 mm thick sheet glass, ordinary quality, glazing with oil putty or fixed with wooden beads in steel/wooden windows in squares n.exc 0.50sqm each pane at any floor/hight complete all as specified & directed.

Dismantling fencing wire mesh, any type complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire on existing angle iron picket complete all as specified and directed.

Supply only chain link fence, MS galvanised of any size or type not exc 4 kg per sqm complete all as specified and directed.

Cleaning of water tanks exc 500 and n exc 1000 ltr capacity including taking down and hoisted in position after cleaning the tanks by brushing and cleaning with bleaching powder complete all as specified and directed. Note:-Rates quoted by contractor deemed to be included in the respective items including supply of bleaching powder and other minor items. items complete all as specified and directed.

Tenderers may be noted that amount of credit will be deducted from the total amount arrived, at the time of Acceptance of contract

M/S Pooja Construction

M/s D K Sharma

shivam builders