18/2025-26/EDCR System improvement works of 11 KV line and other electric works under Business Plan 2025-26 under jurisdiction of EDC, Rampur

Amount

Carriage of the following material from Store Centre, Rampur to work site including loading & unloading.

PCC Pole 11 Mtr Long

PCC Pole 8.5 Mtr Long

11 KV V Type X Arm

ACSR Dog (In Mtr)

ACSR Rabbit Conductor (In Mtr)

Polymeric 11 KV Pin Insulator

Disc fitting T & C with 45 KN

Disc insulator T & C 45 KN

Earthling of Pole

T-Off Channel, 100x50x2240mm

M.S Angle 65x65x6 mm

G.I. Wire 6 Swg

G.I wire 8 Swg

11 KV 3x120 Sqmm XLPE Cable

11 KV 3x185 Sqmm XLPE Cable

Jointing Kit Out door

ACSR Wesel Conductor(Recived Back Site to Store)

ST Pole off Size(Recived Back Site to Store)

a) Single/Double support structure as required (rate given by for single pole ) Excavation of foundation Pit in size of 75x45cm having depth of 1/6th of the full length of the support(pole), providing and laying of stone pad (300x300x75 mm) in the Bottom of the pit. Erection of support(pole) complete with fixing of 11 KV V-type cross-Arms and other accessories by providing clamps made of MS flat of size 65x65xc6 mm with Nuts & Bolts, as per RESPO Norms.

11 Mtr long PCC Pole

8.5 Mtr long PCC Pole

Grouting of support in CC 1:4:8(cement, sand & 40 mm. brick ballast) Grouting will be done in the block of size 45x45cmx1/6th of full length of the support upto ground level, 30 cm plinth above the ground level with CC 1:3:6 (cement, course sand and stone grit) with muffing. The work includes back filling and proper ramming etc. Single/Double support structure(rate given by for single pole )

11 Mtr long PCC Pole

8.5 Mtr long PCC Pole

Earthing of support with MS Earth Rod of (20x2500)mm long including excavation of pit and driving MS Rod 3.0 M apart from support and 0.5 M below the ground level and connecting below the earth electrodes with the help of GI wire No. 8SWG and earthing lugs.

fixing of 11 KV Pin Insulator with Pin as per RESPO Norms and as per direction of Supervising Engineer.

fixing of 11 KV Disc Insulator with Fitting as per RESPO Norms and as per direction of Supervising Engineer.

laying ,stringing and binding of 11 KV 3x120 Sqmm XLPE Cable with the help of cable jointing kit as per RESPO Norms and as per direction of Supervising Engineer.

laying ,stringing and binding of 11 KV 3x185 Sqmm XLPE Cable with the help of cable jointing kit as per RESPO Norms and as per direction of Supervising Engineer.

laying ,stringing and binding of ACSR Rabbit Conductor as per RESPO Norms and as per direction of Supervising Engineer.

laying ,stringing and binding of ACSR Dog Conductor as per RESPO Norms and as per direction of Supervising Engineer.

Providing and painting of Red oxide paint for pole as per RESPO Norms and as per direction of Supervising Engineer.

Providing and painting of AL Paints for pole as per RESPO Norms and as per direction of Supervising Engineer.

Providing and fixing of cable route marker as per RESPO Norms and as per direction of Supervising Engineer.

Providing and fixing and laying of HDPE pipeas per RESPO Norms and as per direction of Supervising Engineer.

Guarding of 33 KV Line by G.I. wire 6 swg and 8 swg wire as per RESPO Norms and as per direction of Supervising Engineer

Providing and fixing of Chemical earthing as RESPO Norms and as per direction of Supervising Engineer

Construction of plinth for 250 kva t/f as per RESPO Norms and as per direction of Supervising Engineer(material will be provide by the contractor)

Providing and fixing of AI jointing sleeves per RESPO Norms and as per direction of Supervising Engineer(complete material provide by contractor)

Providing and fixing Barbed wire per RESPO Norms and as per direction of Supervising Engineer

Providing and fixing Number plate with clamp per RESPO Norms and as per direction of Supervising Engineer

Providing and fixing Danger Board with clamp per RESPO Norms and as per direction of Supervising Engineer

Providing and fixing Stone Pad per RESPO Norms and as per direction of Supervising Engineer

Providing and fixing Suspension Clamp RESPO Norms and as per direction of Supervising Engineer

Providing and fixing Holding clamp RESPO Norms and as per direction of Supervising Engineer

Providing and fixing Nut Bolt and washer all size RESPO Norms and as per direction of Supervising Engineer

Providing and fixing E Bracket RESPO Norms and as per direction of Supervising Engineer

Providing and fixing earth wire clamp RESPO Norms and as per direction of Supervising Engineer

Providing and fixing F Bracket RESPO Norms and as per direction of Supervising Engineer

Providing and fixing Clamp for X Arm with Nut & Bolt as per RESPO Norms and as per direction of Supervising Engineer

Dismentaling of old and used ST pole off size as RESPO Norms and as per direction of Supervising Engineer

Dismentaling of old and used ACSR weasel conductor as RESPO Norms and as per direction of Supervising Engineer

M/s Charley Enterprises (BID ID -5537579)