Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹6.3 L
EMD Value
₹7,000
Closing Date
5 Dec 2026, 4:05 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Executive Engineer (R & B) Division, Bharuch
Construction of Fruit Nursery Office at Bharuch Dist. Bharuch. (Providing office Furniture)
367982
21 Of 2026-27
Open
Furniture/ Fixture
Works
Bharuch
1 document required · 1 mandatory
₹900
Executive Engineer, Bharuch (R&B) Division, Bharuch
₹7,000
21 Nov 2026
21 Nov 2026
21 Nov 2026
5 Dec 2026
21 Nov 2026
90 days
No. Figure Amount
1 High back revolving & tilting executive chair (M-39) Providing and supplying 6.00 No 6000.00
High back chair for conference with M.S. frame work. Upholestered wt. artificial
leather / leatherette and molded PU form together with molded seat & back
cover. The back should be designed with contoured lumber support for extra
comfort. caster of high durability & hydraulic the chair should have cylinder with
5 years warranty the size of chair 53cm x 79cm (back side) and 51cm x 49cm
(seat size). the PU form should be moulded with density = 45 = t2 k/m3 with
one piece armrest the arm rest are scratch and weather resistance the
permanent contact mechanism is design with 360° revolving type. 12° seat tilt
19° back till, front pivot for tilt with feet resting on ground ensure more comfort,
tilt tension adjustment, 5 position locking with antilock back mechanism which
should prevent the backrest from impaction user when the lock is released.
Static seat depth adjustment = 0.5cm 5 position locking. BMC
2 Medium back revolving & tilting chair (M-39) : Providing and supplying Medium 12.00 No. 4000.00
back chair for conference with M.S. frame work. Upholestered with changeable
fabric upholstery cover (as per requirement) and molded PU form, together
with molded seat & back cover. The back should be designed with contoured
lumber support for extra comfort. Caster of high durability & hydraulic. The
chair should have cylinder with 5 years warranty. The size of chair 47.5cm x
58cm (back side) and 49cm x 48cm (seat size). The PU form should be
moulded with density = 45 =+2 kg/m3 with one piece armrest. The arm rest are
scratch and weather resistance. The permanent contact mechanism is design
with 360° revolving type, with pneumatic height adjustment & 17° maximum tilt
only & tilt tension adjustment facility BMC.
3 Main table with side unit :- Providing and supplying Main Table made with 7.00 No. 17000.00
19mm thick Decorative laminate (m1) structure as per architect drawing
finished with 1.00mm thick decorative laminate (m24) on outside portion and
0.8mm thick liner laminate inside as per specified and approve by architect
fixed with necessary fixture and fastening (hardware) (M14) as per architect
drawing. Provide plastic computer table groment cable wire outlet hole cover
60mm, keyboard tray, SS leg, drawer with telescopic roller channel (m15),
handle (M19) and locking (M16) arrangement with all necessary fixture and
fastening (M14). Provide shutter as per drawing fixed with handle (M19),
hinges (M18). Magnet (M14), complete with binding patties and all required
hardware (M14). Provide footrest as per drawing. All expose edge shall be
covered with required teak wood beading patti (M4) finished with approve
melamine polishing (M29) work. complete as per architect drawing and as per
instruction of architect and engineer in charge. Size as per specification.
4 Metal rack :- Providing and supplying metal rack made with slotted M.S angle 31.00 No. 5100.00
rack with adjustable made with high grade steel IS-5986 for upright and IS-
513D All the components shall be throughly pre-treated in stage pretreatment
process and all the component shall be painted with epoxy powder coating and
film thickness of minimum 50 micron.
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
5 Providing, fixing and arranging material welded construction excluding 17.00 No. 14663.00
leveller construction 0.7 mm thick (+/- 0.07mm) CRCA sheet for shelf, 0.8mm
thick (+/- 0.09 mm) High yield strength CRCA sheet for doors and back, 0.9mm
thick (+/-0.08mm) CRCA sheet for all other components, CRCA sheet 'D' grade
high yield strength as per IS : 513. Locking and Handle Mazak handle and
three way locking mechanism with shooting bolt. Shelving height wise
adjustable shelf mounting, Uniformly Distributed load capacity per each shelf is
40Kg maximum, 4 Nos. of adjustable full shelf and box file A4 size (85w x
345H x 285D) can be stored vertically on three shelves and clear space above
fourth shelf is 240mm. Finished with epoxy powder coated to the thickness of
50 microns (+/-10) including all necessary fixtures, fasteners machinery etc.
complete as per photographs / drawing and directed by Engineer in charge.
6 Providing and supplying visitor or guest chair with seat and back made of 12 5.00 No. 3656.00
mm thick hot-pressed plywood, upholstered with changeable fabric upholstery
covers (as per requirement) and molded PU foam, along with molded seat and
back covers. The back foam shall be contoured to provide lumbar support for
enhanced comfort. The chair dimensions shall be approximately 45 cm (W) x
38 cm (H) for the back, and 45 cm (W) x 43 cm (D) for the seat. The PU foam
shall be molded with a density of 45 ± 2 kg/m³. The armrests and legs shall be
fabricated from powder coated mild steel (MS) structure as per Architect’s
all necessary hardware. It shall be confirmed and approved in advance by the
Architect, along with a description and image, or as directed by the Engineer-in-
Total Rs.
i.e. Rs. Six lacs Twenty Eight thousand Six hundred Fifty One only.
I/We am/are willing to carry out the work @ ______________ % above/below percent (Should be written
in figures and words) of the estimated rate mentioned above. Amount of my /our tender works out as under.
Estimated amount put to tender Estimated amount put to tender
Deduct………% below Add………% Above
Net Rs. ___________________________ Total Rs. ________________
In words ____________________ In words _______________
1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the
Engineer-In-Charge for which no extra payment shall be made.
2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.
3. GST and Income tax TDS will be deducted at a source while making payments of bills.
4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.:
PRC-10/2017 Cement Consumption/16/C, Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items
where there is a change as per actual mix design the cost of difference of cement consumption have been
deducted from the rate of original item at the rate of input rate mentioned in all the tender.
Above all items of "Schedule-B" with Item Description, Unit, Rate & Amount have verified by
me and found order.
Deputy Executive Engineer Sr. Divisional Account Officer
City (R & B) Sub Division, Bharuch (R & B) Division,
Bharuch Bharuch
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
GRs - Circulars - 1.pdf
GRs - Circulars - 2.pdf
INDEX-GRs.pdf
E Tender Notice.pdf
SBD.pdf
BOQ.pdf
Specification Index.pdf
Technical Specifications.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .