ADDITION ALTERATION AND SPECIAL REPAIR TO CERTAIN OFFERS JCO AND ORS MD ACCN AT BANBASA UNDER GE PITHORAGARH

Amount

S & F in repairs vitreous china squatting pan of “Orissa” pattern of size 580 mmx 440mm white with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti syphonage pipe etc and making good to disturbed floor as per existing including removing of debris from site (At a place as directed), complete all as specified and as directed. Make:- Jaquar Essco, Cat Part No.-ECS-WHT-451LE/ CERA Cat Part No.- COVY S3010104 / Parryware Cat Part No. - C0117

S&F in repairs brass chromium plated tubular towel rail 20 mm dia D type, 60 cm long between flanges complete all as specified and as directed. Make:- Jaquar Essco, Cat Part No.-ACE-1111/ CERA Cat Part No.- F5006103 / Parryware Cat Part No. - BA-01

S&F in repairs vitreous china wash down water closet pan (pedestal pattern) white excluding flushing cistern flush pipe with and including PVC seat cover (same colour of WC pan) & water jet with with pipe etc complete, and connection to drain or outgoing pipe, antisyphonage pipe, complete all as specified and directed. Make:- Jaquar Essco, Cat Part No.-ECS-WHT-551SSPP/ CERA Cat Part No.- S1050101 / Prayag Cat Part No. - OPAL-4016

M&L for framed work as in grills, gratings etc. with ends of bars shouldered and / or rivetted, or forged into spikes; framed guard bars; barred iron door, railings and similar work conforming to Fe 290-0 or Fe 310-0, complete all as specified and directed.

M&L for coloured non-skid, joint free ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floors etc. set and jointed in neat cement slurry over and including 15 mm thick screed bedding in CM 1:6 and pointed in white or coloured cement to match including dismantling of existing floor hearth and removing the rubbish / debris to a distance as directed by Engr-in-charge, complete all as specified and directed.

M&L for colour glazed ceramic tiles as in vertical surface of size 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match, laid over and including 10mm thick rendering in cement mortar 1:4, including dismantling of existing wall hearth and removing the rubbish / debris to a distance as directed by Engr-in-charge, complete all as specified and directed.

M&L for precast cement concrete tiles 250x250x22mm thick, machine pressed, set, jointed and pointed in neat cement slurry as in roof tiles, laid over and including 15mm thick screed bed in cement mortar 1:6, jointed and point in grey cement and pigment, complete all as specified and as directed.

M&L for vitrified tiles, double charge, coloured, joint free, square or rectangular in shape, 8 to 10mm thick, area of each tile not exceeding 0.36 sqm, as in floors etc. set and jointed in neat cement slurry over and including 15 mm thick screed bedding in CM 1:6 and pointed in white or coloured cement to match including dismantling of existing floor hearth and removing the rubbish / debris to a distance as directed by Engr-in-charge, complete all as specified and directed.

M&L for vitrified tiles, double charge, coloured, joint free, square or rectangular in shape, 8 to 10mm thick, area of each tile not exceeding 0.36 sqm, as in skirting / dado etc. set and jointed in neat cement slurry over and including 10 mm thick rendering in CM 1:4 and pointed in white or coloured cement to match including dismantling of existing wall hearth and removing the rubbish / debris to a distance as directed by Engr-in-charge, complete all as specified and directed.

S&F in repairs brass chromium plated toilet paper holder, fixed with PVC rowl plugs & brass screws, complete all as specified & directed.

Demolition of brick masonary, built in cement mortar including all quoins, arches, pillars etc., complete all as specified and directed.

M&L for brick work with subclass 'B' bricks (old size), straight or curved on plan exc 6m mean radius, built in cement mortar 1:6, complete all as specified and directed.

M&L for brick work with subclass 'B' bricks, straight or curved on plan to any radius as in half brick thick walls, built in cement mortar 1:4, complete all as specified and directed.

Demolition cement concrete (Unreinforced) in any description and in any position not otherwise specifically provided for and removing the rubbish / debris to a distance as directed by Engr-in-charge, complete all as specified and directed.

Demolition of reinforced cement concrete as in RCC chajja, chimney, beams, slab, shelves etc. by chiseling and cutting the reinforcement including removing the rubbish / debris to a distance as directed by Engr-in-charge, complete all as specified and directed

M&L for RCC M25 design mix, using 20 mm graded crushed stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, chajja, canopies, deck slabs and in shelves and the like, complete all as specified and directed.

M&L for PCC 1:2:4 type B1 using 20mm graded stone aggregate as in bends, kerbs, string courses, coping including weathering and throating including necessary form work etc., complete all as specified and directed.

M&L for PCC 1:5:10 type E-2 using 40 mm graded stone aggregate as in foundation filling / mass concrete (as in sunken floor) with and including demolition of existing PCC from sunken portion and removed the same to a distance as directed by Engr-in-Charge, complete all as specified.

M&L for 40mm thick PCC 1:2:4 type B-0, using 12.5mm graded stone aggregate mixed with integral water proofing compound (As per manufacturer's instructions) as in bottom surface of sunken portion with proper slope towards spout pipe with and including 15mm thick rendering in CM 1:3 mixed with integral water proofing compound (As per manufacturer's instructions) on vertical surfaces. After laying sewage / plumbing pipes & fitting & fixtures in position , two coats of OMIPLAS EP-101 epoxy compound shall be applied, complete all as directed. Note:- (i) Water tightness test shall be carried out by ponding test for 72 hours & defects (If any) observed shall be rectified by the contractor at his own cost as directed by Engr-in-Charge. (ii) The process of grouting & ponding test shall be repeated by the contractor at his own cost until leakage / seepage / dampness of sunken portion not stopped.

S&F 25mm dia GI pipe, medium grade as in spout pipe, jointing and testing for leakage proofing from around the spout pipe, grouting in wall by making hole of suitable dia and making good the disturbed surfaces of wall with existing finish, complete all as specified and as directed.

M & L for water proofing treatment over RCC roof by 3mm thick APP modified polymeric water proofing membrane (weight not less than 3 Kg/sqm) over & including 15 mm thick rendering in cement mortar 1:4 on concrete surfaces, finished the surfaces even and smooth including mixing of liquid water proofing compound @ 100 ML per 50 Kg of cement over a bituminous shalitex primer @ 0.30 Kg/sqm evenly over a coat of hot bitumen 85/25 @ 1.2 Kg/sqm. The membrane shall be unrolled and bonded completely to the substrate (with overlap of 100mm on the transverse direction and 75mm on longitudinal direction and sealed by flame) and the overlaps sealed / fused by flame as per manufacturer instructions, including roughening of old existing surface of concrete slab by picking sweeping, cleaning and washing down properly with water to remove all dust, complete all as specified and as directed. Note :- Liquid water proofing compound shall be measured & paid separately under respective items.

Supply only liquid water proofing compound, complete all as specified and directed.

S&F in repairs soap dish, chromium plated stainless steel of size 160x160x1mm thick, fixed to wall with plug & CP brass screws, complete all as specified and directed

S&F in repairs sheet glass assembly consisting of 5.5mm thick sheet glass shelf, 12 CM wide with chromium plated bracket guard and railing 60 Cm long, complete all as specified and diercetd.

Taking up or down steel tubing and connections including cleaning for re-fixing and stacking at a place as directed at site, complete all as specified and as directed for the following sizes:- (a) 15 mm dia bore

(b). 20mm dia bore.

Refixing old serviceable steel tubing and connection in new or old position (Wall, ceiling floor etc.) including necessary fittings & fixtures etc. complete all as specified and directed for following size of pipe :- Note :- Serviceable pipe, obtained from serial item no. 25 to 25.1 shall be re-used under this item. (a) 15 mm dia bore

(b). 20mm dia bore.

S&F, jointing and testing galvanised steel tubing medium grade with all fitting such as bends, elbow, socket, reducer etc and fixed to wall, ceiling or laid in floor complete all as specified and as directed for the following sizes:- (a) 15 mm dia bore

(b). 20mm dia bore.

S & F in repairs 15 mm bore bib taps, chromium plated, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed. Make:- Jaquar Essco, Cat Part No.-MQT-511KN/ CERA Cat Part No.- F2009151 / Prayag Cat Part No. - 9206

S & F in repairs 15 mm bore bib taps, chromium plated, long shank, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed. Make:- Jaquar Essco, Cat Part No.-MQT-512KN/ CERA Cat Part No.- F2009152 / Prayag Cat Part No. - 9208

S & F in repairs 15 mm bore angle stop cock, cast copper alloy, fancy type, chromium plated, screwed down high pressure screwed one ends for iron pipes or for union complete all as specified and directed. Make:- Jaquar Essco, Cat Part No.-MQT-526/ CERA Cat Part No.- F1015201 / Prayag Cat Part No. - 6410

S&F in repairs 15 mm bore stop valve cast copper alloy, fancy type, chromium plated with long shank and cup (Concealed type), screwed down high pressure without or butterfly handle screwed both ends for iron pipes or for union complete all as specified and directed. Make:- Jaquar Essco, Cat Part No.-MQT-514AKN/ CERA Cat Part No.- F2009351 & F4050102 / Prayag Cat Part No. - 9218

M&L for standard aluminium section, powder coated of approved colour, suitable for door / window frames & shutters, sliding / fixed shutters and partition, lovered etc with one or more rebates including joining cleat for fixing, rubber beading / lining, pivot, locking arrangement and fixed in position with stainless steel screws, complete all as specified and directed.

S&F 5.5mm thick plain sheet glass, ordinary quality and glazing with oil putty or rubber & aluminium beading in square n. exc 0.5 Sqm in each pane, complete all as specified and directed.

S&F in repairs vitreous china ware wash hand basin, white, flat back, size 550 mm x 400 including cutting for and pinning ends of brackets and fixed on a pair of CI cantilever bracket of appropriate size, including S&F of 15mm size CP swan neck pillar tap, 450mm long PVC connection, 32 mm dia PTMT waste pipe & waste coupling, complete all as specified and directed. Make of WHB:- Jaquar Essco, Cat Part No.-ECS-WHT-805/ CERA Cat Part No.- S2040121 / Prayag Cat Part No. - Midas-4046. Make of pillar tap:- Jaquar Essco, Cat Part No.-MQT-WHT-510AKN/ CERA Cat Part No.- F2010105 / Prayag Cat Part No. - 9114

S&F in repairs 500 litre capacity of rotational moulded polyethylene water storage tank (cylindrical vertical with closed top), confirming to IS-12701 (1996), three layered construction hoisted and fixed in position including S&F of PVC float valve, complete all as specified and as directed.

Supply and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 95 mm x 45 mm having double rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame., complete as specified by the manufacturer and as per directions of Engineer-in-charge

Supply and fixing 30 mm thick Fiberglass Reinforced Plastic (FRP) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table 3 of IS: 14856 complete all as specified by the manufacturer and as per directions of Engineer-in-charge

S&F in repairs 10 litres capacity, PVC flushing cistern, low level including PVC waste coupling & PVC flush pipe of 32 mm dia of suitable length and complete internal macanism including brackets, complete all as specified and directed.

S&F in repairs PVC (SWR) 110mm bore pipes single socketed, in any length with rubber ring joints, fixed to walls as in rain water pipe, complete all as specified and directed.

S&F in repairs 110 mm bore PVC (SWR) bends, any radius, complete all as specified and directed.

S&F in repairs 100mm dia, cast iron, spun, soil waste and vent pipe, in any length with or without ears, with cement joints, fixed to wall, complete all as specified and directed

S&F stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolt & nuts and securing ends of stays to wall or roof, suitable for 100mm bore CI pipe, complete all as specified and directed.

S&F in repairs 100mm bore cast iron plain bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified & directed.

S&F in repairs cast iron 100mm bore branch pieces, single (equal or unequal), ordinary or inverted (spigot or socketed type) or with parallel branch, fitted with oval access doors, complete all as specified & directed.

S&F in repairs cast iron 100mm bore branch pieces, double (equal or unequal), ordinary or inverted (spigot or socketed type) or with parallel branch, fitted with oval access doors, complete all as specified & directed.

S&F in repairs 15 mm bore PVC connection, 450 mm long with PTMT nut and PVC washer, complete all as specified and directed.

S&F in repairs, 100mm dia, cast iron floor trap with and including suitable size chromium plated stainless steel grating including jointing to waste pipe, fixed to cement concrete type B1 1:2:4, complete all as specified and directed.

S&F in repairs, 100mm dia, cast iron nahani trap with and including suitable size chromium plated stainless steel grating including jointing to waste pipe, fixed to cement concrete type B1 1:2:4, complete all as specified and directed.

S&F in repairs 150x150mm size salt glazed stone ware gully trap, square or round mounthed, 'P' type, including jointing to waste pipe, fixed to cement concrete type B1 1:2:4, compleete all as specified and directed.

S&F in repairs brass chromium plated shower rose with or without swivel joints 125 mm size including fixing to iron pipes or union, complete all as specified and directed. Make:- Jaquar Essco, Cat Part No.-EOS-542A/ CERA Cat Part No.- F7020305 / Prayag Cat Part No. - BS-76

Taking down chowkhat or frames exc. 1.5 sqm but n. exc. 4 sqm each with shutters (without taking off shutter from the frame), complete all as specified and directed.

Taking down chowkhat or frames n. exc. 1.5 sqm each with shutters (without taking off shutter from the frame), complete all as specified and directed.

S & F 35mm thick second class hard wood, factory made glazed and skeleton door shutter open rebated and prepared to receive glass or gauge etc (Without sash bar) edges of framing plain chamfered or rounded, mitred and rebated sash bars any number complete all as specified and as directed. Note :- Size of member of shutters shall be as specified in SSR Part-I 2009 section 8 clause 8.24(a).

M&L for 25mm thick block boards, grade 2 quality, interior grade, commercial type as in cup board shutters, fixed with screws to timber frame-work including 25mm wide x 6mm thick wooden beading fixed with nails all around the shutter, complete all as specified and directed.

M&L for 18mm thick plywood, grade BWP, type BB fixed with screws to timber frame work as in cup board shelves including 18mm wide x 6mm thick teak wood beading fixed with nails, on exposed edges of shelves, complete all as specified and directed

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed.

S&F 35mm thick flush shutters, factory made, solid core construction, with block board core and plywood face panels, commercial type on both sides including 35x6mm thick teak wood lipping around the shutter, complete all as specified and directed

S & F 75mm size butt hinges extruded aluminum alloy with galvanized mild steel hinge pin, anodized type C-21, complete all as specified and as directed

S&F mild steel 300mm long ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

S&F continuous (piano) hinges, mild steel, bright finish, width of flaps (When open) 30mm, complete all as specified and directed.

S&F for 150 mm aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F for 200 mm aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F Mild steel sliding door bolt of size 300mm bolt type stove enamelled black with bright not lessthan 12mm dia with and including minimum of 6 bolts and nuts four on plate and two on staples plat and fixed, complete all as specified and directed.

S&F 250mm length of bolt, aluminium alloy, anodised, sliding door bolts with hasp staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast alluminium alloy, complete all as specified and directed.

M&L for hasp & staple 100mm size, aluminium anodised, safety type, aluminium anodised, including bolt to hing plate and fixed with screws, complete all as specified and directed.

M&L for 40 mm thick PCC 1:2:4 type B-1 (Using 20mm graded stone aggregate) as in floor, finished the surfaces fair & smooth with using extra cement, complete all as specified and directed.

S&F 150 mm size aluminium handles, cast type, anodised, complete all as specified and directed.

M&L for 1.25mm thick pressed steel frames of 125x60mm size suitable for doors with one or more rebates including necessary fixing lugs, hinges (125mm size-06 Nos. & 75mm size-02 in each door frame), lock strike plate etc. including one coat of red oxide primer & PCC 1:3:6 type C-0 be fiiled in door frame, complete all ass specified and directed.

M&L for 1.25mm thick pressed steel frames of 105x60mm size suitable for doors with one or more rebates including necessary fixing lugs, hinges (125mm size-03 Nos. & 75mm size-01 in each door frame), lock strike plate etc. including one coat of red oxide primer & PCC 1:3:6 type C-0 be fiiled in door frame, complete all ass specified and directed.

S & F in repairs chromium plated wall mixer 3-in-1 system with provision of both hand shower and overhead shower complete with and including 125mm size CP casted, flat shape wall mounted shower & 115mm long bend pipe and wall flange including jointing to concealed GI / steel pipes or unions and plugging and screwing to walls, complete all as specified and as directed. Make OF 3 IN 1 MIXER:- Jaquar Essco, Cat Part No.-TQT-519/ CERA Cat Part No.- F2003403 / Prayag Cat Part No. - 9380 Make of telephonic hand shower:- Jaquar Essco, Cat Part No.-SAE-1931SH555/ CERA Cat Part No.- F7030301 / Prayag Cat Part No. - BHS-96 Make of overhead shower:- Jaquar Essco, Cat Part No.-EOS-542A/ CERA Cat Part No.- F7010506 / Prayag Cat Part No. - BOS-42

M & L for PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in bed blocks for embedding hold fasts complete all as specified and directed.

M&L for machine cut kota stone slab flooring 20-25mm thick, laid over and including 15mm thick screed bed in cement mortar 1:6 base, laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including cutting, rubbing and polishing including roughening surface of old existing concrete floor by picking, sweeping clean and washing down with water to remove dust etc. with and including brushing cement slurry with 3.0 Kg of cement per sqm, complete all as specified and as directed. Note:- The size of kota stone slab not less than 550mmx550mm (cut size except the location where balanced.)

All as per item No.71 herein before but as on riser, trade such as dado / skirting, steps etc. over and including 15mm thick rendering in CM (1:4), complete all as specified and directed

M&L for preparation of new wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer on new wooden surfaces, complete all as specified & directed.

M&L for preparation of old steel surfaces over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed

M&L for two coats of synthetic enamel paint over a coat of red oxide primer on new steel surface of any description exc. 10 cm width or girth, including preparation of new steel surfaces, complete all as specified and directed.

S & F in repairs 25mm dia curtain rod, mild steel, chromium plated, medium grade with fixing brackets, stops, rollers etc with and including CP stainless steel brackets & PVC end brackets (02 Nos. in each curtain road), complete all as directed.

S&F in repairs, sinks made of stainless steel 0.80mm thick kitchen or laboratory with plugs, washers and wastes coupling, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 495mm x420mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed.

Taking down cement plaster on brick walls including raking out joints, hacking for key, scrubbing down with water etc. and removing the rubbish / debris to a distance as directed by Engr-in-charge, complete all as specified and as directed.

M&L for 15mm thick cement plaster on other than fair faces of brick work or concrete surface on walls in CM 1:6 finished the surfaces even & smooth without using extra cement, complete all as specified and directed.

M&L for 15mm thick cement plaster on fair surfaces of brick work or concrete surface on walls in CM 1:4 finished the surfaces even & smooth without using extra cement, complete all as specified and directed.

M&L for 5mm thick rendering on fair faces of concrete surfaces of ceilings in CM 1:3, including finishing the surfaces even and smooth without using extra cement, complete all as specified and directed.

M&L for three coats white wash on new plastered surfaces of ceiling including preparation of new surfaces, complete as specified and directed.

M & L for preparing old decorated plastered surfaces of ceilings, pillasters, cornices etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spot and applying two coats of white wash complete all as specified and as directed.

M&L PCC 1:3:6 type C-2 (Using 40mm graded stone aggregate), 75 mm thick as in plinth protection laid as to bays finished even and smooth without using extra cement including forming necessary joints 12mm wide to the full depth of PCC at every 3 m and at change in direction, complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil emulsion distemper of white or tinted, over & including a coat of primer, complete all as specified and directed.

M&L for preparation of old plastered surfaces of walls by complete removal of existing treatment by brooming down or steel wire brushing, moulds, moss and efflorescent salts etc and applying two coats of oil emulsion distemper of white or tinted, over & including a layer of wall care putty (average thickness 1mm) finished smooth, complete all as specified and directed.

M&L for preparation of old plastered surfaces of walls by complete removal of existing treatment by brooming down or steel wire brushing, moulds, moss and efflorescent salts etc and applying two coats of cement base paint over a coat of alkali resistant priming paint, complete all as specified and directed.

M&L for applying two coats cement base paint (snowcem) over a coat of alkali resistant priming paint on new walls surfaces, including preparation of surface of walls, complete all as specified and directed.

M&L for form work to soffits of suspended flat slab such as roof slabs, floor slabs, landing, shelves, chajja and similar work n. exc. 200mm thick (horizontal or sloping), finished the surfaces fair, complete all as specified and directed.

M&L for form work to edges of concrete flats, opening in concrete walls, sides of RCC / PCC bands in walls, horizontal or sloping and similar work exceeding 20 cm wide, finished the surfaces fair, complete all as specified and directed.

M&L for TMT bars, 10 mm dia and over, cut to length, bent to shape required, including cranking, binding spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, complete all as specified and directed.

M&L for TMT bars, 6-8mm, cut to length, bent to shape required including cranking, bending spirally for hooping for column, hooking ends and binding with and incl MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

S&F 100mm size mild steel butt hinges medium weight, cold rolled, complete all as specified and directed.

Taking down carefully Copper/Aluminium point wiring (Light fan socket or power) complete, (fittings such as switches, ceiling roses, pendants, regulators, sockets etc), removing materials from site and making good disturbed surface of walls, floors etc, complete all as specified and directed.

Taking down carefully by disconnecting electrical connection, main switches / distribution board / MCB DB with MCBs of any rating, removing dismantled material from site and making good disturbed surface of walls to match with existing complete all as specified and directed..

Taking down Sub main wire including GI earth wire of any size, fixed in any position, complete all as specified and directed.

M&L for concealed point wiring surface type with 1.5 Sqmm, single core (FRLS), PVC insulated with multistranded unsheathed copper conductor cable including rigid non- metallic concealed PVC conduit 20 mm or higher dia (including chase cutting in brick / stone/ block masonry walls for fixing conduit and making good disturbed surfaces), light grade ISI marked complete with all PVC conduit accessories / fittings and sunk switch boxes with 3 mm thick plastic laminated hard glossy surface sheet (white) top cover, including continuous earth wire of PVC insulated, unsheathed, green in colour 1.5 Sqmm multistranded copper conductor (FRLS) connected to all fittings, sunken boxes and common earth and connected to earth dolly , screwed with brass screws, cup washers and making good the disturbed surfaces, complete all as specified and directed for the following :- (a) One light point/ exhaust / ceiling fan point/bell point controlled by one, one way switch of 5/6 Amps complete all as specified and directed.

(b) One 3 pin 5/6 amps socket out-let point on independent board controlled by one, one way switch of 5/6 amps on independent board complete all as specified and directed.

(c) One 3 pin 5/6 amps socket out-let point on same board controlled by one, one way switch of 5/6 amps on independent board complete all as specified and directed.

(d) One light point controlled by two way switch

All as per item No. 97 herein above but with 2.5 Sq mm cable (FRLS) for one 15 Amp socket outlet controlled by one switch on independent board and 2.5 Sqmm PVC insulated unsheathed multi stranded copper conductor cable as continuous earth wire complete all as specified and directed.

S&F switch piano flush type, single pole, one way 5/6 Amps complete all as specified and directed

S&F switch piano flush type, single pole, two way 5/6 Amps complete all as specified and directed

S&F socket out let, two in one 3 pin 5/6 Amps and 2 pin 5/6 Amps , flush type, non shutters, non interlocking, complete all as specified and directed

S&F socket outlet two in one 3 pin 5/6 and 3 pin 15/16 amps (multipurpose), flush type non shutter, non inter locking type complete all as specified and directed

S&F fan regulator, electronic rotary , flush type, step type, 120 watts, 230 volts, 50 Hz, complete all as specified and as directed.

S&F ceiling rose surface bakelite 65 mm x 50 mm two to three terminals complete all as specified and as directed.

S & F Lamp holder, PVC / polycarbonate with back plate & metal ring suitable for batten fittings, complete all as specified as directed

S&F in repairs 10 watts LED bulk head fitting with PDC aluminium housing and milky diffuser with and including 10 watts LED lamp etc complete all as specified & directed. Make:- Bajaj Cat Part No.BIBDP10WLED / HAVELLS Ellipse Neo Oval ordering code LHEXCGP7PN5W013 / Crompton cat part No. Malena Oval 10 W.

S&F in repair LED integrated batten T5 box type surface mouted, 1x18 Watt prewired including electric electrical connection with PVC insulated twin twisted copper wire of size 0.75 Sqmm from ceiling rose to tube light fitting and including taking down old fitting complete all as specified and directed. Make:- HPL Cat Part No.HPLLEDT818(CW) / HAVELLS cat part no.LUMILINEBS 18W LED 865SPCWH / Crompton SLIM RAY PLUS cat part No. LDSLRP20-CDL.

S&F PVC exhaust fan complete heavy duty with self louvers shutters AC single phase 230 Volt of size 300 mm sweep by grouting both ends in wall up to required length, including making hole of suitable size & making good disturbed surfaces of wall to match the existing surface and connecting with flexible cable 3 core copper conductor of size 23/0.0076 of suitable length from ceiling rose to exhaust fan complete all as specified and as directed. Make:- Bajaj Maxima Dxi 300mm / HAVELLS Ventil air DB 300mm / Crompton Greave Drift air plus 300mm

S&F MCB DB sheet metal enclosure for DB, SPN, 8 way having protection with 200 amps rated bus bar, 240 volts, double door type, suitable for housing MCB's and isolators, concealed in wall, complete all as specified and directed.

S&F MCB DB sheet metal enclosure for DB, SPN, 4 way having protection with 200 amps rated bus bar, 240 volts, double door type, suitable for housing MCB's and isolators, concealed in wall, complete all as specified and directed.

S&F MCB DB sheet metal enclosure for DB, TPN, 4 way having protection with 200 amps rated bus bar, 240 volts, double door type, suitable for housing MCB's and isolators, concealed in wall, complete all as specified and directed.

Supply and fixing LED light fitting mirror type with high output diffuser 2 feet, 10 watt 220 Volt AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed

S&F MCB single, 240 volts, B Curve, 6-10 Amps of 10 KA, complete all as specified and directed.

S&F MCB single pole & neutral 240 volts, B Curve, 6-32 Amps of 10 KA, complete all as specified and directed.

S & F sheet metal enclosure, single pole and neutral with a two pin and earth plug and socket complete with and including one single pole MCB 20 Amp, 240 volts, 10 KA, B curve complete all as specified and as directed.

S&F isolator DP, 240 volts, B Curve, 32 Amps of , 10 KA, B curve complete all as specified and directed.

S&F isolator TPN, 433 volts, B Curve, 100 Amps of 10 KA, complete all as specified and directed.

S&F electric bell, multi music type AC 230 Volts complete all as specified and as directed.

S & F switch bell push button type 5 Amp single pole complete all as specified and as directed.

S&F for sub main wiring with PVC insulated, unsheathed two single core cable 1100 volts grade with copper conductor of size 2x6.0 sqmm of code Red for phase, black for neutral & green for earth, multi stranded drawn into & including suitable dia PVC conduit with and including 4.0 sqmm green stranded copper conductor as contineous earthwire with lugs complete all as specified and as directed. Note: (i) Cost of PVC conduit and accessories shall be deemed to be included in quoted rates. (ii) Two runs of 6 sqmm cable and one run of 4.0 sqmm cable of earth continuity conductor and one run of PVC pipe shall be a unit length.

S&F for sub main wiring with PVC insulated, unsheathed two single core cable 1100 volts grade with copper conductor of size 2x4.0 sqmm of code Red for phase, black for neutral & green for earth, multi stranded drawn into & including suitable dia PVC conduit with and including 2.5sqmm green stranded copper conductor as contineous earthwire with lugs complete all as specified and as directed. Note: (i) Cost of PVC conduit and accessories shall be deemed to be included in quoted rates. (ii) Two runs of 4 sqmm cable and one run of 2.5sqmm cable of earth continuity conductor and one run of PVC pipe shall be a unit length.

M&L for earthing complete with galvanized steel earth plate electrode 600X600X6 mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.50 m deep below normal ground level, connected to galvanized earth lead wire 4.0 mm dia by means of bolts, nuts and washers of galvanised iron or steel all as shown in earth plate No 3 of MES schedule 2009 Part–I connected to earthing test point including earth continuity conductor and loop earthing etc. as required 4 mm dia galvanized iron or steel wire including necessary excavation and earth work, concrete pit & chamber in PCC 1:2:4, type B1 & pit cover, 75mm thick in RCC 1:2:4, type B1 dully reinforced with 6mm dia bar @ 150 mm c/c both ways including with two Nos. lifting handle of MS round bar 10 mm dia and earth lead with and including GI protection pipe light grade 15 mm dia up to 7.5 m from electrode to earth terminal point /main switch board and 20mm bore GI watering pipe medium grade etc. complete all as specified and directed.

M/s DHARAM VIR GHAI

M/s Arihant Builders