Construction of various College Development works under PM-USHA, Dhamnagar College, Dhamnagar, Bhadrak, Odisha

/MR/ Item of Work Unit Quantity Rate Amount

Cleaning & grubbing road land including uprooting rankvegetation, grass

,bushes, shurbes, sapling and trees girth upto 300mm, removal of stumps of

trees cut earier and disposal of unsevicable materials and stacking of

servicable materials to be used or auctioned up to lead of 1000 meters sqm 442.00 9.95 4,396.75

including removal and disposal of top organic soil not exceeding 150mm

Earthwork Excavation

Earth work in excavation of foundation in HARD soil within 50m lead and

1.5m lift including rough dressing and breaking clods to maximum 5cm. To

7cm. And laying in layers not exceeding 0.3m in depth and as per

specification complete.

2 DSR Installing driven cast-in-situ reinforced cement concrete pile

Boring with hydraulic piling rigs with power units, providing and installing

cast in situ single under reamed piles of specified diameter and length below

pile cap in M-25 cement concrete, to carry a safe working load not less than

specified, excluding the cost of steel reinforcement but includin the cost of

boring with bentonite solution and the length of the pile tre embedded in pile Mtr 446.04 3065.60 13,67,380.22

cap etc. all complete. (Length of pile for paymen nall be measured upto to

the bottom of pile cap): (DSR 2023 Item No-20.3.1)

Filling in foundation, trenches and plinth with river sand, well watered and

compacted in layers of 1.8 mtr, with top surface dressed and leveled to

proper gradient including cost of all materials, conveyance, all taxes and

royalties, loading and unloading, including cost of all labour, sundries, T & Cum 111.50 1103.42 1,23,035.27

P etc. All complete as per directions of the Engineer -in-charge.

Filling available excavated earth (excluding rock) in trenches plinth sides of

foundation etc. in layers not exceeding 20 cm in depth , consolidating each

deposited layers by ramming and watering, lead up to 50m and lift up to 1.5

mt etc. including cost of all labour, sundries T & P etc complete in all respect cum 68.05 181.52 12,352.47

as per the direction of Engineer-In-Charge.

Cement concrete of proportion (1:3:6) in foundation and floors using 4cm

size clean hard black crusher broken granite stone metal of approved quality

and from approved quarry including hoisting, lowering and laying concrete

in layers not exceeding 15 cm. (6") thick to the required level ramming,

watering, curing etc. complete including cost, conveyance, royalties of all Cum 52.33 8684.13 4,54,414.55

materials with all labour and T&P required for the work etc. complete in all

respect and as per the direction of the Engineer-in-charge.

6 MR Anti-termite Treatment

Providing & applying of pre constructional anti-termite treatment

Confirming to IS 6313 (Part-II) and creating chemical barrier under and

around the column pits, wall trenches, basement excavation top surface of

plinth filling, junction of wall and floors along with external perimeters of

building, expansion joints, surrounding the pipes and conducts etc. at the

rate at 7 ,5 liter per sqm on vertical surface and 5.0 liter per sqm on sqm 286.23 123.36 35,308.53

horizontal surface. Chemicals:- Imidachloprid 30.5 SC , Doses: - 2.1 ml per

lit of water cost of all materials, labour,conveyance, T&P , all taxes and hire

charges of machinaries as per direction of Engineer-incharge.

Digitally signed by JAYA

Fly Ash brick(1:6)

Fly Ash brick masonry in cement mortar (1:6) in Substructure using Fly Ash

bricks of 25 Cm. x 12 Cm. x 8 Cm. size having a crushing strength of not

less than 75 kg./sqcm with dimensional tolerance ± 2% including splays

cutting circular moulding chamfering and corbelling and similar such type of

works with all necessary projections watering and curing after immersing the

bricks in water at least for six hours before use including cost, conveyance,

royalties and taxes of all materials with all labour,labour cess and T & P

required for the work complete in all respect as per direction of Engineer-in-

Providing, lifting, hoisting and laying Reinforced cement concrete of M-25

grade as per approved designs and drawings having a minimum compressive

strength (in work test) 250 Kg. / Square cm. in 15 cm. cubes at 28 days

after mixing and test conducted in accordance with I.S. 516 using 12 mm. to

20 mm. size black hard crushed broken granite stone chips and screened

and washed sharp sand for mortar of approved quality from approved quarry,

washed and cleaned ( 20mm. size chips not to exceeds 25 %) to be mixed in

concrete mixture with Portland slag cement (PSC) including hoisting,

lowering, laying and compaction concrete by using vibrators, watering and

curing for 28 days, centering and shuttering then after dismantling and

removing debris from the work site and finishing the exposed surface

smooth providing grooves or beads wherever necessary including cost,

conveyance, loading, unloading, royalties and taxes of all materials and cost

of all labours, sundries, T & P required of the work etc.complete in all

respect as directed by the Engineer-in-Charge. But excluding cost and

conveyance of M.S. rods or Tor steel and binding wires and labour charges

for straightening, cutting, bending etc. of M.S. rods or tor steel tying the

grills and placing in proper position.

Foundation and plinth 0.00 -

Column (Below Plinth) 1.22

Plinth beam 13.16

9 MR Reinforcement

Digitally signed by JAYA

Supplying Cutting, straightening coiled or bent up M.S. Rod or tor steel of

primary steel producers such as SAIL / Tiscon / RINL / JINDAL STEEL /

SHYAM STEEL (grade Fe-500D) etc. including bending, binding, welding

and jointing if necessary and tying the grills and placing in position as

required for R.C.C. Work and for providing fan hooks as required, hoisting,

lowering, laying including cost, conveyances, taxes of M.S. Rod or tor steel

and binding wires of 18 to 20 gauge and labour required for the work for

bending, binding and tying the grills in all floors with labour cess etc.

(payment will be made on standard weight of B.I.S. for M.S. Rods or tor

steel only) etc. complete as per specification & direction of Engineer-in-

Foundation and plinth qtl 103.93 9872.01 10,25,997.98

Ground Floor qtl 76.02 9872.01 7,50,439.18

FLY ASH BRICK(1:6)

Fly Ash brick masonry in cement mortar (1:6) in super structure using Fly

Ash bricks of 25 Cm. x 12 Cm. x 8 Cm size having a crushing strength of

not less than 75 kg./sqcm with dimensional tolerance ± 2% including splays

cutting circular moulding chamfering and corbelling and similar such type of

works with all necessary projections watering and curing after immersing the

bricks in water at least for six hours before use including cost, conveyance,

royalties and taxes of all materials with all labour,labour cess and T & P

required for the work complete in all respect as per direction of Engineer-in-

Ground Floor cum 51.64 7948.49 4,10,460.12

Terrace Floor cum 15.75 8908.46 1,40,308.20

16 mm Plastering

Providing 16 mm thick cement plaster with cement mortar of mix (1:6) with

screened and washed sharp sand for mortar and finished smooth to the rough

surface of walls in all heights after racking out joints including watering and

curing, rounding of corners, providing grooves where ever necessary with

cost, conveyance, royalties of all materials with cost of all labour,labour cess,

T&P, and scaffolding required for the work etc. complete in all respect as

directed by the Engineer in charge.

Ground Floor sqm 288.14 341.21 98,315.90

First Floor sqm 248.91 354.97 88,353.60

Terrace Floor sqm 143.50 369.41 53,010.45

12 mm Plastering

Providing 12 mm thick cement plaster with cement mortar of mix (1:6) with

screened and washed sharp sand for mortar and finished smooth to the rough

surface of walls in all heights after racking out joints including watering and

curing, rounding of corners, providing grooves where ever necessary with

cost, conveyance, royalties of all materials with cost of all labour,labour cess,

T&P, and scaffolding required for the work etc. complete in all respect as

directed by the Engineer in charge.

Ground Floor sqm 352.49 238.77 84,165.09

First Floor sqm 348.25 244.28 85,071.76

6 mm Plastering

Providing 6 mm thick cement plaster with cement mortar of mix (1:4) with

screened and washed sharp sand for mortar and finished smooth to R.C.C.

work after closed deep chipping & slurry treatment including watering and

curing, rounding of corners, providing grooves where ever necessary with

cost, conveyance, royalties of all materials with cost of all labour, T&P, and

scaffolding required for the work etc. complete in all respect as directed by

the Engineer in charge.

Ground Floor sqm 295.96 264.27 78,213.24

First Floor sqm 229.47 270.73 62,122.46

14 MR Water Proofing

Digitally signed by JAYA

Providing and installing two component acrylic modified cementitious

waterproofing coating with Nerolac-Perma Guard 2K / Equivalent with

Nerolac-Perma Fibremesh AR 45 GSM over roof slab after carring out pond

test on roof slab filling all defects. Saturating the surface mixing the products

and then application in 1.0 mm thickness (2.0 kg/sqm coverage rate for

1.0mm thickness) in suitable layers complete in all respect all material, tools,

plant & labour complete in all respect. Density 1750kg/m3, mix ratio

(Powder to liquid ) 2.1 by weight.

First Floor sqm 54.00 548.23 29,604.31

Terrace Floor sqm 205.80 548.23 1,12,825.32

Grading Plaster

Providing 2.5cm thick Grading Concrete over roof slab with cement concrete

(1:2:2) using 6mm size black hard granite crusher broken chips and screened

& washed sharp sand for mortar and finished smooth to the rough surface of

slab including watering and curing with cost, conveyance, royalties of all

materials with cost of all labour, labour cess and T&P required for the work

etc. complete in all respect as directed by the Engineer in charge.

First Floor sqm 54.00 559.74 30,226.22

Terrace Floor sqm 205.80 613.53 1,26,264.31

Industrial Vitrified Tiles

Supplying, fitting & fixing of 8-10 mm thick & size of 300x300 mm

Industrial vertified floor tiles in floors of approved make laid on 20 mm thick

cement mortar (1:4) (1 cement : 4 course sand) and filling joints with slurry

including cost of all materials, labour T&P etc required for the work all

complete as per direction of the Engineer-in-charge .

Ground Floor sqm 73.60 1306.02 96,123.37

Vitrified Floor Tiles

Providing full body matt finish vitrified tile flooring using vitrified tiles

having thickness of min 10mm conforming to IS 13755 of 600x600

(homogeneous) of premium quality in floors, treads on steps and landings on

20mm thick bed of cement mortar of mix (1:4) laid in proper slope and

gradient with screened and washed sharp sand for mortar and fixing with

neat white cement slurry,grouting the joints with neat white cement slurry

mixed with required quantities of pigments of approved make to match the

shades of the vitrified tile if required , watering and curing for 21 days,

including cost, conveyance, loading, unloading, royalties and taxes of all

materials, cost of all labour,Labour cess, sundries, T&P required for the

work, complete in all respect as per specification and direction of Engineer-

Vitrified Floor Skirting

Providing, fitting, fixing vitrified tiles of premium grade having thickness

8mm to 10mm confirming to IS 13756 of size 600mm x 600mm Plain

(Ivory) of approved make as directed by Engineer-in-charge in dados

skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with

neat cement slurry mixed with pigment to match the shades of the tiles

including rubbing and polishing etc. complete with cost, conveyance,

royalties of all materials all labour, labour cess complete in all respects.

Ground Floor sqm 10.79 1556.05 16,789.82

First Floor sqm 11.45 1579.97 18,090.69

Kotta Floor tiles

Kotta Tile (SOR PG-11, Sl-93)

Ground Floor sqm 106.92 590.24 63,110.04

Digitally signed by JAYA

Kotta Tile (SOR PG-11, Sl-93)

Ground Floor sqm 1.94 590.24 1,146.53

21 MR UPVC Door

Supplying and fixing-Fixing of Un-plasticised poly vinyl chloride (UPVC)

Casenent Door-60-Series duly manufactured using UPVC reinforced profiles

of 60mm x 55mm x 2.5mm for outer frames 102mm x 60mm x 2.5mm

casement Door Sash profile and 74mm x 60mm x 2.5mm mullion peofile

capable of mounting single glazing system, structurally reinforced with hot

dip galvanised up to 50 microns of minimum thickness of 2.0 mm

prefabricated & welded through fusion welding the door sash shall be fitted

with 12mm thick WPC Board of Greenply make duly fixed with EPDM

weathering seal resistant accessories like clipping locking system made of

aluminium 1 No. per set of sashes and th esystem isto be installed at the site

using anchor fasteners, silicon rubber sealant,easy glazing/deglazing at site

etc. including cost and conveyance of all material, accessories, labour

charges, materials and product conforming to ASTM D 638-14,EN-447-95

and other applicable codes and standards.

22 MR UPVC Window

Providing and fixing of UPVC (Un Plasticized Poly Vinyl Chloride) Sliding

windows 2 Track Windows made out of hollow- chambered UPVC Sections

having isolated drainage and reinforced throughout with galvanized steel.

The 2 track outer frame of the window shall be made out of UPVC sections

having an overall size of 60mm x 62mm x 2mm thickness or Equivalent for

shutter frames of 60mm x 45mm x 2mm thickness mounting single glazing

system. Structurally Reinforced with hot dip galvanized up to 50 microns of

minimum thickness of 1.2mm with moldings glazing Beading (up 5mm to

18mm) with interlocking system. Prefabricated & welded through fusion

welding the window outer frame & sash shall be fitted with 5mm thickness

Clearglass of reputed brand (Saint Gobain Glass) make duly fixed with

EPDM rubber, weathering sealant & Accessories like touch lock made by

brand. The outer frame & sash is to be installed at the side using anchor

fastener, Silicon Rubber Sealant, easy glazing at the side. At least 15 years

manufacturing warranty for discoloration, wrapping, mechanical failures,

Shrinkages, Rooting Corrosion etc. with a quality Certificate from relevant

departments of that government through the Dealers including of all

materials and abounds etc. Complete as per directions of Engineer in-

charge.Providing of 2 track 2 panel sliding Door Upvc Sliding Windows

duly made of Fenstech upvc FRAME section 62mm x 60mm and

SHUTRER section 45mm x 57mm,Solid & Inbuild gasket beading.

Ground Floor sqm 26.73 5307.26 1,41,863.12

Supplying, fitting & fixing in all floors of M.S. grills, grill gates, M.S. gates,

garage door, collapsible gates with top and bottom rails, steel windows,

critical frames for windows, stair case and parapet railing made out of M.S

Square bar/ flat including stair case hand railing with 40mm. dia G.I.pipe etc.

including painting two coats over a coat of redoxide primer as per approved

drawing and design with cost of all materials & labour, labour cess, T&P,

sundries etc. complete in all respect as per specification & direction of the

Engineer-in-Charge.

Ground Floor kg 588.06 143.97 84,664.06

24 MR S.S. RAILING

Digitally signed by JAYA

Supplying fitting and fixing of stainless steel of 304 grade in hand railing

using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x

32mm x 2mm @ 0.90 mtrs C/C and stainless square pipe bracing of size

32mm x 32mm x 2mm in 3 rows in staircase as per approved design and

specification, buffing, polishing etc with coist, conveyance, taxes of all

materials, labour and T&P required for the work all complete in all respect .

Synthetic Enamel Paint (Iron Work)

Painting two coat with approved synthetic enamel paint to new iron work

over a coat of Red oxide primer including cost, conveyances, royalties, taxes

of all materials and cost of all labour with T&P required for the work etc.

complete as per specification & direction of Engineer in charge.

Ground Floor sqm 26.73 312.46 8,352.16

First Floor sqm 19.44 320.37 6,227.99

Antifungal Weather Coat Paint

Wall painting two coats with Antifungal weather coat paint (1st quality)

exterior grade of approved make & approved shade over a coat of primer to

make an even finished surface in all floors and heights with all scaffolding

and staging charges including cost, conveyance, cost of all labours, T & P,

sundries etc. as required for the work complete in all respect as per the

direction of the Engineer-in-Charge.

Ground Floor sqm 288.14 119.18 34,340.53

First Floor sqm 248.91 120.83 30,075.82

Terrace Floor sqm 143.50 122.60 17,593.39

Plastic Emulsion Paint

Painting two coats with plastic emulsion paint with a approved quality

primer to make an even finished surface in all floors and heights to wall

surface of approved make and shade including sand papering, applying putty

necessary & cost of scaffolding, staging charges with cost, conveyance, cost

of all labour,labour cess, T&P etc. complete as per the direction of the

Engineer-in-charge.

Ground Floor sqm 648.45 128.54 83,350.08

First Floor sqm 577.72 131.11 75,744.75

Priming one coat with wall cement primer (water bound) to make an even

finished surface in all floors and heights to wall surface of approved make

and shade including sand papering, applying putty wherever necessary &

cost of scaffolding, staging charges with cost, conveyance, cost of all

labour,labour cess T&P etc. complete as per the direction of the Engineer-in-

Ground Floor sqm 936.59 97.47 91,287.21

First Floor sqm 826.62 99.83 82,519.93

Terrace Floor sqm 143.50 102.19 14,663.98

Finishing plastered surfaces of walls with cement based wall putty (Water

based) of approved make and finishing the surface smooth and even by sand

papering to receive painting in walls, at all heights with staging wherever

necessary with cost, conveyance, cost of all labour,labourcess, all T&P etc.

required for the work complete in all respect as per the direction of the

Engineer-in-charge.

Ground Floor sqm 936.59 100.54 94,160.65

First Floor sqm 826.62 100.54 83,105.18

Digitally signed by JAYA

PROJECT NAME: PROPOSED INFRASTRUCTURE DEVELOPMENT OF (ARTS COLLEGE ) DHAM NAGAR ,

Sl.No. Description of work Unit Qty. Rate Amount

INTERNAL ELECTRICAL WORKS

A. Circuit Cum Wiring

1 Supplying & Wiring for light point/ fan/ exhaust fan point/ call bell

point with 1.5 sqmm FR PVC insulated copper conductor single core

cable in surface / recessed 1.6 mm thick PVC conduit with modular

switch and earthing the point with 1.5 sqmm FRLS PVC insulated

copper conductor single core cable including providing modular box

with cover of requisite number of modules including providing cover

plates as required. -

a) OSR Single light point controlled by one 6A switch or first light point of

group control. Each 98 1,508.04 1,47,787.92

b) OSR Subsequent point of group control Each 42 559.32 23,491.44

2 OSR Supplying and fixing two module steeped type electronic fan regulator

with proper modular plate switch box including connections etc. as

3 OSR Supplying & fixing suitable size GI Box with modular plate and cover

in front on surface or in recess, including providing and fixing 5pin 5/6

amps modular socket outlet and 5/6 amps modular switch etc. as

required. Nos 14 645.46 9,036.44

4 OSR Supplying & fixing suitable size GI Box with 6 modular plate and

cover in front on surface or in recess, including providing and fixing 2

nos 5pin 5/6 amps modular socket outlet and 2nos 5/6 amps modular

switch etc. as required. Nos 34 914.50 31,093.00

5 OSR Supply, installation, testing & commissioning of 6 / 16 Amp Plug

Boards consisting of a 16 Amp clip-in type modular switch with

indicator and a 6/16 Amp clip-in type modular shuttered plug socket

fixed on metallic concealed box including interconnections and making

good the damages caused complete as required and as per direction of

Engineer-in-charge. Nos 4 807.12 3,228.48

6 OSR Supplying, installation, testing & commissioning of 20 Amp AC starter

switch with 25 Amp modular socket outlet with 25 Amp Plug on

surface or in recess, on 2 Nos two module GI box with plate etc.

complete with direction of Engineer-in-charge. Starter-Crabtree (cat no-

ACT0202504) or equivalent. Each 4 1,323.96 5,295.84

7 Wiring for circuit/ submain wiring along with earth wire of following

size of FRLS heavy gauge PVC insulated copper conductor single core

cable in heavy duty PVC conduit laid in surface/ recess as required. -

a) OSR 2X2.5 + 1X2.5 sqmm FRLS Cu wire Mtr 804 201.78 1,62,231.12

b) OSR 2X4 + 1X4 sqmm FRLS Cu wire Mtr 60 221.84 13,310.40

c) OSR 2X6 + 1X2.5 sqmm FRLS Cu wire Mtr 180 259.60 46,728.00

d) OSR 4X6 + 2X2.5 sqmm FRLS Cu wire Mtr 100 374.06 37,406.00

e) OSR 4X10 + 2X4 sqmm FRLS Cu wire Mtr 150 523.92 78,588.00

B. Fan & indoor Fixtures -

8 MR Supply, delivery and fixing of Ceiling fan hook box made out of 18

swg GI sheet and containing 10 mm dia round ms bar projecting atleast

150mm on either side & duly bent to accommodate ceiling fan down

rod bolt & having earthing arrangement as per direction of Engineer-

in-charge. Each 42 141.60 5,947.20

9 Supplying, installation, testing and commissioning following type of

light fixtures with dummy box for surface mounted fixtures only, fans

and exhaust fans with all accessories, as required.(The colour

temprature for fixtures shall be between 3500 deg K & white in colour

per application) ( Use antibacterial UV Light for blood bank rooms.)

a) MR Surface mounted 2'X2' LED fitting (3600 Lumen/ 36W) Each 8 5,599.10 44,792.80

b) MR Round Surface mounted LED fitting (1800 Lumen/ 18W) Each 21 2,466.20 51,790.20

c) MR Linear Batten type wall mounted 4' LED fitting (2000 Lumen/ 20W)

Digitally signed by JAYA

PROJECT NAME: PROPOSED INFRASTRUCTURE DEVELOPMENT OF (ARTS COLLEGE ) DHAM NAGAR ,

Sl.No. Description of work Unit Qty. Rate Amount

d) MR Led Bulb fitted with wall mounted Angle Holder (900 Lumen/ 9 W)

e) MR Compact Aluminium IP66 type 900 Lumen/10W LED Bulkhead wall

fitting Each 3 1,486.80 4,460.40

f) MR Batten Type 10 watt Mirror light fitting with extruded polycarbonate

housing,High optically efficient diffuser,above wash basin complete

with all accessories etc. Each 5 649.00 3,245.00

g) MR 90W Street Light IP66 mounted with 32mm dia 800mm length GI

10 Supplying, installation, testing and commissioning of ceiling fan (5 star

rating) including wiring the down rod, earthing etc as required

11 Supplying, installation, testing and commissioning of Exhaust fan (star

rating) including louvres, Ceiling Rose & Electric Connection as

a) MR 300mm sweep 900 RPM Each 1 2,183.00 2,183.00

12 Supplying, installation, testing and commissioning of Heavy Duty

Exhaust fan (5 star rating) including louvres, Ceiling Rose & Electric

Connection as required. -

a) MR 300mm sweep 900 RPM Each 2 5,325.34 10,650.68

C. Panels, MDBs, DBs. MCBs -

Supply, installation, testing and commissioning of cubicle type

sectionalised, front operated top entry dust and vermin proof

M.V.Panel Boards suitable for operation at 415V, 3 phase, 4 wire,

50Hz distribution system fabricated out of 2.0 mm thick CRCA sheet,

insulated busbar with heat shrienkable PVC sleeve, base channel,

wiring with space heater, thermostat and control MCBs shall be

provided for all vertical sections of main LT Panel, all hinged door

shall be earthed through 2.5 sq mm tinned braided, the incoming and

outgoing feeders shall be accommodated in a modular arrangement,

detachable gland plates, adequate size cable alley, Sign writing,

Painting, Earthing, Numbering, Danger plate, including PVC insulated

copper FRLS wires of minimum 1.5 sq.mm & 2.5 sq.mm for CT's etc.

with all accessories including interconnections, earth bus, Surge

protection Device(SPD) etc. as required.(All the incomers of the panel

must be mounting with RS 485 communication port for BMS

Compartibility)

13 Main Distribution PANEL -

Two(2)-Incomer feeders (1 nos from EB/Raw & 1 nos from DG

Set) each comprising of -

One (1) - 415V, 160 A, 25KA, TPN, MCCB with Thermal Magnetic

releases, shunt trip release, auxilliary contacts and terminals taken out

suitable for bustrunking termination as required.

One(1)- Multifunction digital meter suitable for three phase four wire

system, unbalanced loading CL 1.0, flush mounting with RS 485

communication port for reading Voltage, Current, pf. KW, KWH,

KVA, KVAr, KVAh, KVArHr (BMS Compartibilty)

One set - Indicating lamp for ON/OFF/Trip and Phase indication with

control fuse/ MCB. -

One(1) set of 100/5A ,15VA , Cl 1.0, CTs. -

1Set of 160Amps 4Pole Changeover switch -

Busbar - 200 Amp Al busbar suitable for operation at 415 Volt, 50 Hz,

3 Phase Supply. -

Six (6) - Outgoing Feeders for (2 No PDBs & 4 spare) each

Comprising of -

One (1) -63A TPN 25KA MCB with required other accesories. -

Digitally signed by JAYA

PROJECT NAME: PROPOSED INFRASTRUCTURE DEVELOPMENT OF (ARTS COLLEGE ) DHAM NAGAR ,

Sl.No. Description of work Unit Qty. Rate Amount

Four(4) - Outgoing Feeders for (2Nos LDB & 2Nos spares) each

Comprising of -

One (1) -63A DP 25KA MCB with required other accesories. -

MR PANEL AS ABOVE Set 1 1,47,377.28 1,47,377.28

14 Supplying and fixing following way, horizontal type three pole and

neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess,

complete with tinned copper bus bar, neutral bus bar, earth bar, din bar,

interconnections, powder painted including earthing etc. as required.

(But without MCB/RCCB/Isolator). (For all Floors LDBs, PDBs,

ACDBs & UDBs) -

a) OSR 4 way, Double door(8+12) Each 3 5,038.60 15,115.80

Supplying and fixing following way, horizontal type Single pole and

neutral, sheet steel, MCB distribution board, 230 V, on surface/ recess,

complete with tinned copper bus bar, neutral bus bar, earth bar, din bar,

interconnections, powder painted including earthing etc. as required.

(But without MCB/RCCB/Isolator). (For all Floors LDBs, PDBs,

ACDBs & UDBs) -

a) OSR 12 way, Double door Each 2 2,313.98 4,627.96

15 Supplying and fixing following rating MCBs/ Isolator in the existing

MCB DB complete with connections,testing and commissioning etc. as

a) OSR 63 Amps, FP 10 KA MCB (C-Curve) Each 3 3,499.88 10,499.64

OSR 63 Amps, DP 10 KA MCB (C-Curve) Each 2 1,799.50 3,599.00

b) OSR 6 Amp to 32 Amp, 10 KA SP MCB (C-Curve) Each 56 468.46 26,233.76

16 OSR Supplying and fixing 63Amps 4P 415 volts RCCB 30 mA Make-

LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9 in the

existing MCB DB in the existing MCB DB complete with connections

as per direction of Engg.-in-Charge..The MCB should be Replacement

Warranty will be 3 years. Nos 3 6,182.02 18,546.06

D. Cables, Cable Laying & Termination -

17 Supplying & Testing of 1.1 KV grade Aluminium XLPE power cable

of following size suitable for 415 Volt, 3Ph, 50 c/s supply. -

CABLE LAYING -

18 Laying of one number PVC insulated and PVC sheathed/XLPE power

cable of 1.1KV grade of following size direct in ground including

excavation (75 cm),sand cushioning,protective covering and refilling

the trench etc as required. -

a) OSR Above 35 sq. mm and upto 95 sq. Mm Mtr 100 398.84 39,884.00

TERMINATION OF CABLES -

19 Supply & Making end Termination with brass compression gland and

Cu/aluminium lugs for PVC insulated and PVC sheathed cable of 1.1

kv grade (without cost of Cable) -

20 OSR Supplying,installation,testing & commissioning of materials and

installation of GI earth plate 600mmx600mmx6mm thick ISI marked

with G. I. nut bolts & washers including cost of burnt wood charcoal,

salt, foreign soil, water pouring arrangements, brick masonary

enclosure on top with removable RCC cover complete with labour for

excavation of pit in all kinds of soil & rock as required and as per

direction of Engineer-in-charge.The entire earthing system should be

Replacement Warranty will be 2 years

Digitally signed by JAYA

PROJECT NAME: PROPOSED INFRASTRUCTURE DEVELOPMENT OF (ARTS COLLEGE ) DHAM NAGAR ,

Sl.No. Description of work Unit Qty. Rate Amount

21 OSR Providing and fixing 25mm x 5 mm GI strip on surface or in recess for

connections etc. as required as per direction of Engg.-in-Charge.

Total (E.I. works): 13,25,608.46

LIGHTING ARRESTOR WORKS

Providing and fixing of lightning conductor finial made of 25 mm dia

300 mm long, copper tube, having single prong at top, with 85 mm dia

3 mm thick copper base plate including holes etc. complete as required. Nos 8 813.02 6,504.16

2 OSR Reveting, sweating and soldering of copper / G.I. tape ( with another

copper / G.I. tape, base of the finial or any other metallic object) as

required. Nos 8 211.22 1,689.76

3 OSR Providing and fixing of copper tape 20 mm x 3 mm thick on parapet or

surface of wall for lightning conductor complete as required. (For

horizontal run) Mtr 200 299.72 59,944.00

4 OSR Providing and fixing of copper tape 20 mm x 3 mm thick on parapet or

surface of wall for lightning conductor complete as required. (For

vertical run) Mtr 60 352.82 21,169.20

5 OSR Providing and fixing of testing joint, made of 20 mm x 3 mm thick

Copper strip, 125 long with 4 nos of G.I. bolts, check nuts and spring

washer etc complete as required. Nos 4 109.74 438.96

6 OSR Providing and laying of copper tape 32 mm x 6 mm from earth

electrode directly in ground as required. Mtr 20 808.30 16,166.00

7 OSR Supply of UL Listed maintenance free ,Low carbon copper coated

earth rod of 3 metre electrode having diameter of 17.2 mm with copper

coating thickness of 250micron tested as per IEC 62561-2.

8 OSR Supply of universal clamp made of SS to connect rod with flat

9 OSR Supply of Earth conductivity enhancing mineral compound shall be of

25 kg/pit tested as per IEC 62561-7,TCLP tested. No 4 3,348.84 13,395.36

10 OSR Supply of The above arrangements shall be provided with Heavy duty

earth champer of 5000kg load bearing capacity to ensure the safety of

earthing system. No 4 2,559.42 10,237.68

SUB TOTAL 1,53,475.52

FIRE FIGHTING WORKS

FIRE EXTINGUISHER :

Note : [1] All Fire Extinguisher shall be HCFC, CFC and Halons free.

[2] The Fire Extinguisher Manufacturer/Supplier shall provide

declaration, Technical Data Sheet/cutsheet of All type of Fire

extinguisher to be installed.

1 Providing and fixing Carbon-di-oxide fire extinguishers consisting of

welded M.S cylindrical body,squeeze lever discharge valve fitted with

internal discharge tube, ISI marked high pressure discharge hose,

discharge nozzle, suspension bracket, confirming to IS : 15683

finished externally with red enamel paint and fixed to wall with

brackets with rawl plug/dash fasteners complete with internal charge

with CO2 gas conforming to IS : 307-1996

a) MR Capacity 4.5 kg. I.S.I. Marked. (IS : 15683 : 2006) 8 Each 7,091.80 56,734.40

Digitally signed by JAYA

PROJECT NAME: PROPOSED INFRASTRUCTURE DEVELOPMENT OF (ARTS COLLEGE ) DHAM NAGAR ,

Sl.No. Description of work Unit Qty. Rate Amount

2 Providing and fixing ABC stored pressure dry chemical powder (mono

ammonium phosphate) Fire Extinguisher IS : 15683 latest revision

manufacturer and of CRCA sheet in welded construction, finish with

High quality epoxy polyster powder coated complete with brass forged

ball valve, gun metal cap and nozzle, including initial filled and wall

suspension bracket (suitable for fighting in class 'A', B & 'C' that is

wood, textile, flammable liquid, electric and gases). -

Sub Total 81,136.80

DATA NETWORK WORKS

Supply & Laying of Cat6 23Awg UTP Cable, through existing conduit,

Supply & fixing of RJ-45Jack of Category 6 with Single-port British-

2 MR style Face plate 86x86 mm with Curveture and wall mount box

3 MR Supply & fixing of Cat6 24 Port Loaded Patch Panel: 2 Nos 10,827.68 21,655.36

Supply & Installation of Cat6 Factory crimpped moulded patch

Supply & Installation of Cat6 Factory crimpped moulded patch cord,

Supply and fixing of 24 Port Layer2 Giga (10/100/1000BaseT) PoE

Switch with 4 x 1Gig SFP Port , Switching Capacity 56 Gbps,

Throughput 41.7 Mpps ,Management Port 1 x RJ 45 Console port

,PoE power budget 370 Watt, Switch should support IEEE 802.3af &

6 MR IEEE 802.3at standard ,MAC Address 16K , Jumbo Frame 12K

,Temperature Working 0°C~50°C, storage -40°C~70°C, Power Supply

AC: 100~240VAC. All hardware should supplied with necessary

mounting brackets and IN power cord with 3 years of comprehensive

onsite warranty 2 Nos 77,231.00 1,54,462.00

Supply,Installation,Testing & Commissioning of 12U/500D Wall

Mount Rack with Accessories: The rack size should be 600W x 500D,

Front frame integrated with top, bottom, front and two side panels for

better rigidity and strength, Front Glass Door with Lock loaded,

Compliance with standards shall be UL 2416., DIN 41494, IEC EN

including Power Distribution Unit (06/16 Amp Indian-Standard - 06

Socket - Single Pole / Screw Mountable / 16 Amp MCB / Alternating

Current - 16 Amp 3 Pin Plug with Power Cable 2.5 sq.mm 3 meter

Lengt), 1 cooling Fan(230V AC - 90 CFM, dB 42), 2nos 1U Metal

Cable manager with Plastic cable loops and H/W screw.

Supplying and fixing of following sizes of medium class PVC FRLS

conduit ISI marked along with accessories in surface/recess including

8 cutting the wall and making good the same in case of recessed conduit

as required as per direction of Engg.-in-Charge.

Sub Total Amount 3,82,981.98

Sub Total Amount 3,82,981.98

Digitally signed by JAYA

ABSTRACT ESTIMATE FOR PROPOSED INFRASTRUCTURE DEVELOPMENT OF (SCIENCE COLLEGE ) DHAM NAGAR ,

SCIENCE BLOCK, CIVIL WORKS

MR/ Item of Work Unit Quantity Amount

Cleaning & grubbing road land including uprooting rankvegetation, grass

,bushes, shurbes, sapling and trees girth upto 300mm, removal of stumps of

trees cut earier and disposal of unsevicable materials and stacking of

servicable materials to be used or auctioned up to lead of 1000 meters sqm 510.00 9.95 5,073.17

including removal and disposal of top organic soil not exceeding 150mm

Earthwork Excavation

Earth work in excavation of foundation in HARD soil within 50m lead and

1.5m lift including rough dressing and breaking clods to maximum 5cm. To

7cm. And laying in layers not exceeding 0.3m in depth and as per

specification complete.

3 DSR Installing driven cast-in-situ reinforced cement concrete pile

Boring with hydraulic piling rigs with power units, providing and installing

cast in situ single under reamed piles of specified diameter and length below

pile cap in M-25 cement concrete, to carry a safe working load not less than

specified, excluding the cost of steel reinforcement but includin the cost of

boring with bentonite solution and the length of the pile tre embedded in pile Mtr 446.04 3,065.60 13,67,380.22

cap etc. all complete. (Length of pile for paymen nall be measured upto to the

bottom of pile cap): (DSR 2023 Item No-20.3.1)

Filling in foundation, trenches and plinth with river sand, well watered and

compacted in layers of 1.8 mtr, with top surface dressed and leveled to proper

gradient including cost of all materials, conveyance, all taxes and royalties,

loading and unloading, including cost of all labour, sundries, T & P etc. All Cum 109.85 1,103.42 1,21,215.90

complete as per directions of the Engineer -in-charge.

Filling available excavated earth (excluding rock) in trenches plinth sides of

foundation etc. in layers not exceeding 20 cm in depth , consolidating each

deposited layers by ramming and watering, lead up to 50m and lift up to 1.5

mt etc. including cost of all labour, sundries T & P etc complete in all respect cum 68.67 181.52 12,465.36

as per the direction of Engineer-In-Charge.

Cement concrete of proportion (1:3:6) in foundation and floors using 4cm size

clean hard black crusher broken granite stone metal of approved quality and

from approved quarry including hoisting, lowering and laying concrete in

layers not exceeding 15 cm. (6") thick to the required level ramming,

watering, curing etc. complete including cost, conveyance, royalties of all Cum 49.97 8,684.13 4,33,958.22

materials with all labour and T&P required for the work etc. complete in all

respect and as per the direction of the Engineer-in-charge.

7 MR Anti-termite Treatment

Providing & applying of pre constructional anti-termite treatment Confirming

to IS 6313 (Part-II) and creating chemical barrier under and around the

column pits, wall trenches, basement excavation top surface of plinth filling,

junction of wall and floors along with external perimeters of building,

expansion joints, surrounding the pipes and conducts etc. at the rate at 7 ,5

liter per sqm on vertical surface and 5.0 liter per sqm on horizontal surface. sqm 277.05 123.36 34,176.11

Chemicals:- Imidachloprid 30.5 SC , Doses: - 2.1 ml per lit of water cost of all

materials, labour,conveyance, T&P , all taxes and hire charges of machinaries

as per direction of Engineer-incharge.

Fly Ash brick(1:6)

Digitally signed by JAYA

Fly Ash brick masonry in cement mortar (1:6) in Substructure using Fly Ash

bricks of 25 Cm. x 12 Cm. x 8 Cm. size having a crushing strength of not less

than 75 kg./sqcm with dimensional tolerance ± 2% including splays cutting

circular moulding chamfering and corbelling and similar such type of works

with all necessary projections watering and curing after immersing the bricks

in water at least for six hours before use including cost, conveyance, royalties

and taxes of all materials with all labour,labour cess and T & P required for

the work complete in all respect as per direction of Engineer-in-Charge.

Providing, lifting, hoisting and laying Reinforced cement concrete of M-25

grade as per approved designs and drawings having a minimum compressive

strength (in work test) 250 Kg. / Square cm. in 15 cm. cubes at 28 days after

mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20

mm. size black hard crushed broken granite stone chips and screened and

washed sharp sand for mortar of approved quality from approved quarry,

washed and cleaned ( 20mm. size chips not to exceeds 25 %) to be mixed in

concrete mixture with Portland slag cement (PSC) including hoisting,

lowering, laying and compaction concrete by using vibrators, watering and

curing for 28 days, centering and shuttering then after dismantling and

removing debris from the work site and finishing the exposed surface smooth

providing grooves or beads wherever necessary including cost, conveyance,

loading, unloading, royalties and taxes of all materials and cost of all labours,

sundries, T & P required of the work etc.complete in all respect as directed by

the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or

Tor steel and binding wires and labour charges for straightening, cutting,

bending etc. of M.S. rods or tor steel tying the grills and placing in proper

Foundation and plinth

Column (Below Plinth) 1.22

Plinth beam 12.94

10 MR Reinforcement

Digitally signed by JAYA

Supplying Cutting, straightening coiled or bent up M.S. Rod or tor steel of

primary steel producers (grade Fe-500D) etc. including bending, binding,

welding and jointing if necessary and tying the grills and placing in position

as required for R.C.C. Work and for providing fan hooks as required, hoisting,

lowering, laying including cost, conveyances, taxes of M.S. Rod or tor steel

and binding wires of 18 to 20 gauge and labour required for the work for

bending, binding and tying the grills in all floors with labour cess etc.

(payment will be made on standard weight of B.I.S. for M.S. Rods or tor steel

only) etc. complete as per specification & direction of Engineer-in-charge.

Foundation and plinth qtl 103.66 9,872.01 10,23,332.54

FLY ASH BRICK(1:6)

Fly Ash brick masonry in cement mortar (1:6) in super structure using Fly Ash

bricks of 25 Cm. x 12 Cm. x 8 Cm size having a crushing strength of not less

than 75 kg./sqcm with dimensional tolerance ± 2% including splays cutting

circular moulding chamfering and corbelling and similar such type of works

with all necessary projections watering and curing after immersing the bricks

in water at least for six hours before use including cost, conveyance, royalties

and taxes of all materials with all labour,labour cess and T & P required for

the work complete in all respect as per direction of Engineer-in-Charge.

Terrace Floor cum 11.23 8,908.46 1,00,005.67

16 mm Plastering

Providing 16 mm thick cement plaster with cement mortar of mix (1:6) with

screened and washed sharp sand for mortar and finished smooth to the rough

surface of walls in all heights after racking out joints including watering and

curing, rounding of corners, providing grooves where ever necessary with

cost, conveyance, royalties of all materials with cost of all labour,labour cess,

T&P, and scaffolding required for the work etc. complete in all respect as

directed by the Engineer in charge.

Ground Floor sqm 247.90 341.21 84,585.73

First Floor sqm 164.93 354.97 58,544.82

Terrace Floor sqm 102.28 369.41 37,783.58

12 mm Plastering

Providing 12 mm thick cement plaster with cement mortar of mix (1:6) with

screened and washed sharp sand for mortar and finished smooth to the rough

surface of walls in all heights after racking out joints including watering and

curing, rounding of corners, providing grooves where ever necessary with

cost, conveyance, royalties of all materials with cost of all labour,labour cess,

T&P, and scaffolding required for the work etc. complete in all respect as

directed by the Engineer in charge.

Ground Floor sqm 354.07 238.77 84,542.36

First Floor sqm 224.63 244.28 54,872.51

6 mm Plastering

Providing 6 mm thick cement plaster with cement mortar of mix (1:4) with

screened and washed sharp sand for mortar and finished smooth to R.C.C.

work after closed deep chipping & slurry treatment including watering and

curing, rounding of corners, providing grooves where ever necessary with

cost, conveyance, royalties of all materials with cost of all labour, T&P, and

scaffolding required for the work etc. complete in all respect as directed by the

Engineer in charge.

Ground Floor sqm 300.70 264.27 79,465.51

First Floor sqm 168.50 270.73 45,616.21

15 MR Water Proofing

Digitally signed by JAYA

Providing and installing two component acrylic modified cementitious

waterproofing coating with Nerolac-Perma Guard 2K / Equivalent with

Nerolac-Perma Fibremesh AR 45 GSM over roof slab after carring out pond

test on roof slab filling all defects. Saturating the surface mixing the products

and then application in 1.0 mm thickness (2.0 kg/sqm coverage rate for 1.0mm

thickness) in suitable layers complete in all respect all material, tools, plant &

labour complete in all respect. Density 1750kg/m3, mix ratio (Powder to

liquid ) 2.1 by weight.

First Floor sqm 110.85 548.23 60,770.25

Terrace Floor sqm 150.30 548.23 82,398.67

Grading Plaster

Providing 2.5cm thick Grading Concrete over roof slab with cement concrete

(1:2:2) using 6mm size black hard granite crusher broken chips and screened

& washed sharp sand for mortar and finished smooth to the rough surface of

slab including watering and curing with cost, conveyance, royalties of all

materials with cost of all labour, labour cess and T&P required for the work

etc. complete in all respect as directed by the Engineer in charge.

First Floor sqm 110.85 559.74 62,046.87

Terrace Floor sqm 150.30 613.53 92,213.44

Industrial Vitrified Tiles

Supplying, fitting & fixing of 8-10 mm thick & size of 300x300 mm

Industrial vertified floor tiles in floors of approved make laid on 20 mm thick

cement mortar (1:4) (1 cement : 4 course sand) and filling joints with slurry

including cost of all materials, labour T&P etc required for the work all

complete as per direction of the Engineer-in-charge .

Ground Floor sqm 76.14 1,306.02 99,440.67

Vitrified Floor Tiles

thickness of min 10mm conforming to IS 13755 of 600x600 (homogeneous)

of premium quality in floors, treads on steps and landings on 20mm thick bed

of cement mortar of mix (1:4) laid in proper slope and gradient with screened

and washed sharp sand for mortar and fixing with neat white cement

slurry,grouting the joints with neat white cement slurry mixed with required

quantities of pigments of approved make to match the shades of the vitrified

tile if required , watering and curing for 21 days, including cost, conveyance,

loading, unloading, royalties and taxes of all materials, cost of all

labour,Labour cess, sundries, T&P required for the work, complete in all

respect as per specification and direction of Engineer-in-charge

Vitrified Floor Skirting

Providing, fitting, fixing vitrified tiles of premium grade having thickness

8mm to 10mm confirming to IS 13756 of size 600mm x 600mm Plain (Ivory)

of approved make as directed by Engineer-in-charge in dados skirting and

risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement

slurry mixed with pigment to match the shades of the tiles including rubbing

and polishing etc. complete with cost, conveyance, royalties of all materials all

labour, labour cess complete in all respects.

Ground Floor sqm 10.84 1,556.05 16,867.63

First Floor sqm 8.70 1,579.97 13,745.76

Kotta Tile (SOR PG-11, Sl-93)

Ground Floor sqm 111.13 590.24 65,592.93

Kotta Tile (SOR PG-11, Sl-93)

Ground Floor sqm 1.94 590.24 1,146.53

Digitally signed by JAYA

22 MR UPVC Door

Supplying and fixing-Fixing of Un-plasticised poly vinyl chloride (UPVC)

(FENESTA/NCL VEKA LTD.) manufactured using UPVC reinforced

profiles of 60mm x 55mm x 2.5mm for outer frames 102mm x 60mm x

2.5mm casement Door Sash profile and 74mm x 60mm x 2.5mm mullion

peofile capable of mounting single glazing system, structurally reinforced with

hot dip galvanised up to 50 microns of minimum thickness of 2.0 mm

prefabricated & welded through fusion welding the door sash shall be fitted

with 12mm thick WPC Board of Greenply make duly fixed with EPDM

weathering seal resistant accessories like clipping locking system made of

aluminium 1 No. per set of sashes and th esystem isto be installed at the site

using anchor fasteners, silicon rubber sealant,easy glazing/deglazing at site

etc. including cost and conveyance of all material, accessories, labour charges,

materials and product conforming to ASTM D 638-14,EN-447-95 and other

applicable codes and standards. (Ref.-Office of the Engineer-In-Chife

(CIVIL), Odisha Nirman Soudha,Bhubaneswar. Lt. No-16100)

23 MR UPVC Window

Providing and fixing of UPVC (Un Plasticized Poly Vinyl Chloride) Sliding

windows 2 Track Windows made out of hollow- chambered UPVC Sections

having isolated drainage and reinforced throughout with galvanized steel. The

2 track outer frame of the window shall be made out of UPVC sections having

an overall size of 60mm x 62mm x 2mm thickness or Equivalent for shutter

frames of 60mm x 45mm x 2mm thickness mounting single glazing system.

Structurally Reinforced with hot dip galvanized up to 50 microns of minimum

thickness of 1.2mm with moldings glazing Beading (up 5mm to 18mm) with

interlocking system. Prefabricated & welded through fusion welding the

window outer frame & sash shall be fitted with 5mm thickness Clearglass of

reputed brand (Saint Gobain Glass) make duly fixed with EPDM rubber,

weathering sealant & Accessories like touch lock made by brand. The outer

frame & sash is to be installed at the side using anchor fastener, Silicon

Rubber Sealant, easy glazing at the side. At least 15 years manufacturing

warranty for discoloration, wrapping, mechanical failures, Shrinkages,

Rooting Corrosion etc. with a quality Certificate from relevant departments of

that government through the Dealers including of all materials and abounds

etc. Complete as per directions of Engineer in-charge.Providing of 2 track 2

panel sliding Door Upvc Sliding Windows duly made of Fenstech upvc

FRAME section 62mm x 60mm and SHUTRER section 45mm x 57mm,Solid

& Inbuild gasket beading.

Supplying, fitting & fixing in all floors of M.S. grills, grill gates, M.S. gates,

garage door, collapsible gates with top and bottom rails, steel windows,

critical frames for windows, stair case and parapet railing made out of M.S

Square bar/ flat including stair case hand railing with 40mm. dia G.I.pipe etc.

including painting two coats over a coat of redoxide primer as per approved

drawing and design with cost of all materials & labour, labour cess, T&P,

sundries etc. complete in all respect as per specification & direction of the

Engineer-in-Charge.

MR Ground Floor kg 588.06 143.97 84,664.06

25 S.S. RAILING

Supplying fitting and fixing of stainless steel of 304 grade in hand railing

using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x

32mm x 2mm @ 0.90 mtrs C/C and stainless square pipe bracing of size

32mm x 32mm x 2mm in 3 rows in staircase as per approved design and

specification, buffing, polishing etc with coist, conveyance, taxes of all

materials, labour and T&P required for the work all complete in all respect .

Digitally signed by JAYA

Synthetic Enamel Paint (Iron Work)

Painting two coat with approved synthetic enamel paint to new iron work

over a coat of Red oxide primer including cost, conveyances, royalties, taxes

of all materials and cost of all labour with T&P required for the work etc.

complete as per specification & direction of Engineer in charge.

Ground Floor sqm 26.73 312.46 8,352.16

First Floor sqm 14.58 320.37 4,670.99

Antifungal Weather Coat Paint

Wall painting two coats with Antifungal weather coat paint (1st quality)

exterior grade of approved make & approved shade over a coat of primer to

make an even finished surface in all floors and heights with all scaffolding

and staging charges including cost, conveyance, cost of all labours, T & P,

sundries etc. as required for the work complete in all respect as per the

direction of the Engineer-in-Charge.

Ground Floor sqm 247.90 119.18 29,544.75

First Floor sqm 164.93 120.83 19,928.83

Terrace Floor sqm 102.28 122.60 12,539.81

Plastic Emulsion Paint

Painting two coats with plastic emulsion paint with a approved quality primer

to make an even finished surface in all floors and heights to wall surface of

approved make and shade including sand papering, applying putty wherever

necessary & cost of scaffolding, staging charges with cost, conveyance, cost

of all labour,labour cess, T&P etc. complete as per the direction of the

Engineer-in-charge.

Ground Floor sqm 654.77 128.54 84,162.43

First Floor sqm 393.13 131.11 51,543.20

Priming one coat with wall cement primer (water bound) to make an even

finished surface in all floors and heights to wall surface of approved make and

shade including sand papering, applying putty wherever necessary & cost of

scaffolding, staging charges with cost, conveyance, cost of all labour,labour

cess T&P etc. complete as per the direction of the Engineer-in-charge.

Ground Floor sqm 902.67 97.47 87,980.97

First Floor sqm 558.05 99.83 55,709.15

Terrace Floor sqm 102.28 102.19 10,451.86

Finishing plastered surfaces of walls with cement based wall putty (Water

based) of approved make and finishing the surface smooth and even by sand

papering to receive painting in walls, at all heights with staging wherever

necessary with cost, conveyance, cost of all labour,labourcess, all T&P etc.

required for the work complete in all respect as per the direction of the

Engineer-in-charge.

Ground Floor sqm 902.67 100.54 90,750.35

First Floor sqm 558.05 100.54 56,104.25

Digitally signed by JAYA

PROJECT NAME: PROPOSED INFRASTRUCTURE DEVELOPMENT OF (SCIENCE COLLEGE ) DHAM NAGAR ,

Sl.No. Description of work Unit Qty. Rate Amount

INTERNAL ELECTRICAL WORKS

A. Circuit Cum Wiring

1 Supplying & Wiring for light point/ fan/ exhaust fan point/ call bell

point with 1.5 sqmm FR PVC insulated copper conductor single core

cable in surface / recessed 1.6 mm thick PVC conduit with modular

switch and earthing the point with 1.5 sqmm FRLS PVC insulated

copper conductor single core cable including providing modular box

with cover of requisite number of modules including providing cover

plates as required.

a) OSR Single light point controlled by one 6A switch or first light point of

group control. Each 147 1,508.04 2,21,681.88

b) OSR Subsequent point of group control Each 60 559.32 33,559.20

2 OSR Supplying and fixing two module steeped type electronic fan regulator

with proper modular plate switch box including connections etc. as

3 OSR Supplying & fixing suitable size GI Box with modular plate and cover

in front on surface or in recess, including providing and fixing 5pin 5/6

amps modular socket outlet and 5/6 amps modular switch etc. as

4 OSR Supplying & fixing suitable size GI Box with 6 modular plate and

cover in front on surface or in recess, including providing and fixing 2

nos 5pin 5/6 amps modular socket outlet and 2nos 5/6 amps modular

switch etc. as required. Nos 42 914.50 38,409.00

5 OSR Supply, installation, testing & commissioning of 6 / 16 Amp Plug

Boards consisting of a 16 Amp clip-in type modular switch with

indicator and a 6/16 Amp clip-in type modular shuttered plug socket

fixed on metallic concealed box including interconnections and making

good the damages caused complete as required and as per direction of

Engineer-in-charge. Nos 6 807.12 4,842.72

6 OSR Supplying, installation, testing & commissioning of 20 Amp AC starter

switch with 25 Amp modular socket outlet with 25 Amp Plug on

surface or in recess, on 2 Nos two module GI box with plate etc.

complete with direction of Engineer-in-charge. Starter-Crabtree(cat no-

ACT0202504) or equivalent. Each 4 1,323.96 5,295.84

7 Wiring for circuit/ submain wiring along with earth wire of following

size of FRLS heavy gauge PVC insulated copper conductor single core

cable in heavy duty PVC conduit laid in surface/ recess as required. -

a) OSR 2X2.5 + 1X2.5 sqmm FRLS Cu wire Mtr 1776 201.78 3,58,361.28

b) OSR 2X4 + 1X4 sqmm FRLS Cu wire Mtr 90 221.84 19,965.60

c) OSR 2X6 + 1X2.5 sqmm FRLS Cu wire Mtr 180 259.60 46,728.00

d) OSR 4X6 + 2X2.5 sqmm FRLS Cu wire Mtr 100 374.06 37,406.00

e) OSR 4X10 + 2X4 sqmm FRLS Cu wire Mtr 150 523.92 78,588.00

B. Fan & indoor Fixtures -

8 MR Supply, delivery and fixing of Ceiling fan hook box made out of 18

swg GI sheet and containing 10 mm dia round ms bar projecting atleast

150mm on either side & duly bent to accommodate ceiling fan down

rod bolt & having earthing arrangement as per direction of Engineer-

in-charge.Supplying, installation, testing and commissioning following

type of light fixtures with dummy box for surface mounted fixtures

only, fans and exhaust fans with

9 all accessories, as required.(The colour temprature for fixtures shall be

between 3500 deg K & white in colour as per application) ( Use

antibacterial UV Light for blood bank rooms.) -

a) MR Surface mounted 2'X2' LED fitting (3600 Lumen/ 36W) Each 10 5,599.10 55,991.00

b) MR Round Surface mounted LED fitting (1800 Lumen/ 18W) Each 28 2,466.20 69,053.60

Digitally signed by JAYA

PROJECT NAME: PROPOSED INFRASTRUCTURE DEVELOPMENT OF (SCIENCE COLLEGE ) DHAM NAGAR ,

Sl.No. Description of work Unit Qty. Rate Amount

c) MR Linear Batten type wall mounted 4' LED fitting (2000 Lumen/ 20W)

d) MR Led Bulb fitted with wall mounted Angle Holder (900 Lumen/ 9 W)

e) MR Compact Aluminium IP66 type 900 Lumen/10W LED Bulkhead wall

f) MR Batten Type 10 watt Mirror light fitting with extruded polycarbonate

housing,High optically efficient diffuser,above wash basin complete

with all accessories etc. Each 5 649.00 3,245.00

g) MR 90W Street Light IP66 mounted with 32mm dia 800mm length GI

10 Supplying, installation, testing and commissioning of ceiling fan (5 star

rating) including wiring the down rod, earthing etc as required

11 Supplying, installation, testing and commissioning of Exhaust fan (star

rating) including louvres, Ceiling Rose & Electric Connection as

a) MR 300mm sweep 900 RPM Each 2 2,183.00 4,366.00

12 Supplying, installation, testing and commissioning of Heavy Duty

Exhaust fan (5 star rating) including louvres, Ceiling Rose & Electric

Connection as required. -

C. Panels, MDBs, DBs. MCBs -

Supply, installation, testing and commissioning of cubicle type

sectionalised, front operated top entry dust and vermin proof

M.V.Panel Boards suitable for operation at 415V, 3 phase, 4 wire,

50Hz distribution system fabricated out of 2.0 mm thick CRCA sheet,

insulated busbar with heat shrienkable PVC sleeve, base channel,

wiring with space heater, thermostat and control MCBs shall be

provided for all vertical sections of main LT Panel, all hinged door

shall be earthed through 2.5 sq mm tinned braided, the incoming and

outgoing feeders shall be -

accommodated in a modular arrangement, detachable gland plates,

adequate size cable alley, Sign writing, Painting, Earthing, Numbering,

Danger plate, including PVC insulated copper FRLS wires of

minimum 1.5 sq.mm & 2.5 sq.mm for CT's etc. with all accessories

including interconnections, earth bus, Surge protection Device(SPD)

etc. as required.(All the incomers of the panel must be mounting with

RS 485 communication port for BMS Compartibility)

13 Main Distribution PANEL -

Two(2)-Incomer feeders (1 nos from EB/Raw & 1 nos from DG

Set) each comprising of -

One (1) - 415V, 160 A, 25KA, TPN, MCCB with Thermal magnetic

releases, shunt trip release, auxilliary contacts and terminals taken out

suitable for bustrunking termination as required.

Digitally signed by JAYA

PROJECT NAME: PROPOSED INFRASTRUCTURE DEVELOPMENT OF (SCIENCE COLLEGE ) DHAM NAGAR ,

Sl.No. Description of work Unit Qty. Rate Amount

One(1)- Multifunction digital meter suitable for three phase four wire

system, unbalanced loading CL 1.0, flush mounting with RS 485

communication port for reading Voltage, Current, pf. KW, KWH,

KVA, KVAr, KVAh, KVArHr (BMS Compartibilty)

One set - Indicating lamp for ON/OFF/Trip and Phase indication with

control fuse/ MCB. -

One(1) set of 160/5A ,15VA , Cl 1.0, CTs. -

1Set of 160Amps 4Pole Changeover switch -

Busbar - 200 Amp Al busbar suitable for operation at 415 Volt, 50

Hz, 3 Phase Supply. -

Six (6) - Outgoing Feeders for (2 No PDBs & 4 spare) each

Comprising of -

One (1) -63A TPN 25KA MCB with required other accesories. -

Four(4) - Outgoing Feeders for (2Nos LDB & 2Nos spares) each

Comprising of -

One (1) -63A DP 25KA MCB with required other accesories. -

MR PANEL AS ABOVE Set 1 1,47,377.28 1,47,377.28

14 Supplying and fixing following way, horizontal type three pole and

neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess,

complete with tinned copper bus bar, neutral bus bar, earth bar, din

bar, interconnections, powder painted including earthing etc. as

required. (But without MCB/RCCB/Isolator). (For all Floors LDBs,

PDBs, ACDBs & UDBs) -

a) OSR 4 way, Double door(8+12) Each 3 5,038.60 15,115.80

Supplying and fixing following way, horizontal type Single pole and

neutral, sheet steel, MCB distribution board, 230 V, on surface/ recess,

complete with tinned copper bus bar, neutral bus bar, earth bar, din

bar, interconnections, powder painted including earthing etc. as

required. (But without MCB/RCCB/Isolator). (For all Floors LDBs,

PDBs, ACDBs & UDBs) -

a) OSR 12 way, Double door Each 2 2,313.98 4,627.96

15 Supplying and fixing following rating MCBs/ Isolator in the existing

MCB DB complete with connections,testing and commissioning etc. as

a) MR 63 Amps, FP 10 KA MCB (C-Curve) Each 3 3,499.88 10,499.64

b) OSR 63 Amps, DP 10 KA MCB (C-Curve) Each 2 1,799.50 3,599.00

c) OSR 6 Amp to 32 Amp, 10 KA SP MCB (C-Curve) Each 56 468.46 26,233.76

16 OSR Supplying and fixing 63Amps 4P 415 volts RCCB 30 mA Make-

LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9 in the

existing MCB DB in the existing MCB DB complete with connections

as per direction of Engg.-in-Charge..The MCB should be Replacement

Warranty will be 3 years. Nos 3 6,182.02 18,546.06

D. Cables, Cable Laying & Termination -

17 Supplying & Testing of 1.1 KV grade Aluminium XLPE power cable

of following size suitable for 415 Volt, 3Ph, 50 c/s supply. -

CABLE LAYING -

18 Laying of one number PVC insulated and PVC sheathed/XLPE power

cable of 1.1KV grade of following size direct in ground including

excavation (75 cm),sand cushioning,protective covering and refilling

the trench etc as required. -

a) OSR Above 35 sq. mm and upto 95 sq. Mm Mtr 100 398.84 39,884.00

Digitally signed by JAYA

PROJECT NAME: PROPOSED INFRASTRUCTURE DEVELOPMENT OF (SCIENCE COLLEGE ) DHAM NAGAR ,

Sl.No. Description of work Unit Qty. Rate Amount

TERMINATION OF CABLES -

19 Supply & Making end Termination with brass compression gland and

Cu/aluminium lugs for PVC insulated and PVC sheathed cable of 1.1

kv grade (without cost of Cable) -

20 OSR Supplying,installation,testing & commissioning of materials and

installation of GI earth plate 600mmx600mmx6mm thick ISI marked

with G. I. nut bolts & washers including cost of burnt wood charcoal,

salt, foreign soil, water pouring arrangements, brick masonary

enclosure on top with removable RCC cover complete with labour for

excavation of pit in all kinds of soil & rock as required and as per

direction of Engineer-in-charge.The entire earthing system should be

Replacement Warranty will be 2 years

21 OSR Providing and fixing 25mm x 5 mm GI strip on surface or in recess for

connections etc. as required as per direction of Engg.-in-Charge.

Total (E.I. works): 18,02,750.90

LIGHTING ARRESTOR WORKS

Providing and fixing of lightning conductor finial made of 25 mm dia

300 mm long, copper tube, having single prong at top, with 85 mm dia

3 mm thick copper base plate including holes etc. complete as required. Nos 10 813.02 8,130.20

2 OSR Reveting, sweating and soldering of copper / G.I. tape ( with another

copper / G.I. tape, base of the finial or any other metallic object) as

required. Nos 10 211.22 2,112.20

3 OSR Providing and fixing of copper tape 20 mm x 3 mm thick on parapet or

surface of wall for lightning conductor complete as required. (For

horizontal run) Mtr 250 299.72 74,930.00

4 OSR Providing and fixing of copper tape 20 mm x 3 mm thick on parapet or

surface of wall for lightning conductor complete as required. (For

vertical run) Mtr 60 352.82 21,169.20

5 OSR Providing and fixing of testing joint, made of 20 mm x 3 mm thick

Copper strip, 125 long with 4 nos of G.I. bolts, check nuts and spring

washer etc complete as required. Nos 6 109.74 658.44

6 OSR Providing and laying of copper tape 32 mm x 6 mm from earth

electrode directly in ground as required. Mtr 30 808.30 24,249.00

7 OSR Supply of UL Listed maintenance free ,Low carbon copper coated

earth rod of 3 metre electrode having diameter of 17.2 mm with copper

coating thickness of 250micron tested as per IEC 62561-2.

8 OSR Supply of universal clamp made of SS to connect rod with flat

9 OSR Supply of Earth conductivity enhancing mineral compound shall be of

25 kg/pit tested as per IEC 62561-7,TCLP tested. No 6 3,348.84 20,093.04

10 OSR Supply of The above arrangements shall be provided with Heavy duty

earth champer of 5000kg load bearing capacity to ensure the safety of

earthing system. No 6 2,559.42 15,356.52

SUB TOTAL 2,02,594.20

FIRE FIGHTING WORKS

FIRE EXTINGUISHER :

Digitally signed by JAYA

PROJECT NAME: PROPOSED INFRASTRUCTURE DEVELOPMENT OF (SCIENCE COLLEGE ) DHAM NAGAR ,

Sl.No. Description of work Unit Qty. Rate Amount

Note : [1] All Fire Extinguisher shall be HCFC, CFC and Halons free.

[2] The Fire Extinguisher Manufacturer/Supplier shall provide

declaration, Technical Data Sheet/cutsheet of All type of Fire

extinguisher to be installed.

1 Providing and fixing Carbon-di-oxide fire extinguishers consisting of

welded M.S cylindrical body,squeeze lever discharge valve fitted with

internal discharge tube, ISI marked high pressure discharge hose,

discharge nozzle, suspension bracket, confirming to IS : 15683

finished externally with red enamel paint and fixed to wall with

brackets with rawl plug/dash fasteners complete with internal charge

with CO2 gas conforming to IS : 307-1996.

a) MR Capacity 4.5 kg. I.S.I. Marked. (IS : 15683 : 2006) 12 Each 7,091.80 85,101.60

2 Providing and fixing ABC stored pressure dry chemical powder (mono

ammonium phosphate) Fire Extinguisher IS : 15683 latest revision

manufacturer and of CRCA sheet in welded construction, finish with

High quality epoxy polyster powder coated complete with brass forged

ball valve, gun metal cap and nozzle, including initial filled and wall

suspension bracket (suitable for fighting in class 'A', B & 'C' that is

wood, textile, flammable liquid, electric and gases). -

Sub Total 1,21,705.20

DATA NETWORK WORKS

Supply & Laying of Cat6 23Awg UTP Cable, through existing conduit,

Make: Legrand/ Systimax/ Panduit 360 Mtr 73.16 26,337.60

Supply & fixing of RJ-45Jack of Category 6 with Single-port British-

2 MR style Face plate 86x86 mm with Curveture and wall mount box Make:

Legrand/ Systimax/ Panduit 12 Nos 645.46 7,745.52

Supply & fixing of Cat6 24 Port Loaded Patch Panel:Make: Legrand/

Systimax/ Panduit 1 Nos 10,827.68 10,827.68

Supply & Installation of Cat6 Factory crimpped moulded patch

cord,1mtr, Make: Legrand/ Systimax/ Panduit 24 Nos 384.68 9,232.32

Supply & Installation of Cat6 Factory crimpped moulded patch cord,

2mtr. Make: Legrand/ Systimax/ Panduit 12 Nos 454.30 5,451.60

Supply and fixing of 24 Port Layer2 Giga (10/100/1000BaseT) PoE

Switch with 4 x 1Gig SFP Port , Switching Capacity 56 Gbps,

Throughput 41.7 Mpps ,Management Port 1 x RJ 45 Console port

,PoE power budget 370 Watt, Switch should support IEEE 802.3af &

6 MR IEEE 802.3at standard ,MAC Address 16K , Jumbo Frame 12K

,Temperature Working 0°C~50°C, storage -40°C~70°C, Power Supply

AC: 100~240VAC. All hardware should supplied with necessary

mounting brackets and IN power cord with 3 years of comprehensive

onsite warranty 1 Nos 77,231.00 77,231.00

Digitally signed by JAYA

PROJECT NAME: PROPOSED INFRASTRUCTURE DEVELOPMENT OF (SCIENCE COLLEGE ) DHAM NAGAR ,

Sl.No. Description of work Unit Qty. Rate Amount

Supply,Installation,Testing & Commissioning of 12U/500D Wall

Mount Rack with Accessories: The rack size should be 600W x 500D,

Front frame integrated with top, bottom, front and two side panels for

better rigidity and strength, Front Glass Door with Lock loaded,

Compliance with standards shall be UL 2416., DIN 41494, IEC EN

including Power Distribution Unit (06/16 Amp Indian-Standard - 06

Socket - Single Pole / Screw Mountable / 16 Amp MCB / Alternating

Current - 16 Amp 3 Pin Plug with Power Cable 2.5 sq.mm 3 meter

Lengt), 1 cooling Fan(230V AC - 90 CFM, dB 42), 2nos 1U Metal

Cable manager with Plastic cable loops and H/W screw.

Supplying and fixing of following sizes of medium class PVC FRLS

conduit ISI marked along with accessories in surface/recess including

8 cutting the wall and making good the same in case of recessed conduit

as required as per direction of Engg.-in-Charge.

Sub Total Amount 1,78,227.20

Sub Total Amount 1,78,227.20

Digitally signed by JAYA

ABSTRACT ESTIMATE FOR PROPOSED INFRASTRUCTURE DEVELOPMENT OF (ARTS

RENOVATION, CIVIL WORKS

MR/ Item of Work Unit Quantity Rate Amount

Dismantling & removing doors, windows, &

Dismantling & removing doors, windows, & ventilator

including removal of frame, hinges, fastening & stacking

the same for reuse and rmoving the debris with in 50. m

Lead etc complete.

Dismanteling & removing old tile flooring

Dismanteling & removing old tile flooring including

removing the base course and stacking the useful

materials for reuse and removing the debris with in 50. m

Dismanteling & removing old tile cladding from

Dismanteling & removing old tile cladding from

walls(dado) including raking out joints 12 mm deep

stacking the useful materials for reuse and removing the

debris with in 50. m Lead.

Removing old lime or cement plaster from walls

Removing dry or oil bound distemper, water proofing

cement paint andthe like by scrapping, sand papering and

preparing the surface smooth including necessary repairs sqm 107.72 29.68 3196.93

to scratches etc. complete. DSR 2023 Sl Number 13.91 P-

16 mm Plastering

Providing 16 mm thick cement plaster with cement

mortar of mix (1:6) with screened and washed sharp sand

for mortar and finished smooth to the rough surface of

walls in all heights after racking out joints including

watering and curing, rounding of corners, providing

grooves where ever necessary with cost, conveyance, sqm 526.23 341.21 179554.90

royalties of all materials with cost of all labour,labour

cess, T&P, and scaffolding required for the work etc.

complete in all respect as directed by the Engineer in

12 mm Plastering

Providing 12 mm thick cement plaster with cement

mortar of mix (1:6) with screened and washed sharp sand

for mortar and finished smooth to the rough surface of

walls in all heights after racking out joints including

watering and curing, rounding of corners, providing

grooves where ever necessary with cost, conveyance, sqm 538.62 238.77 128607.91

royalties of all materials with cost of all labour,labour

cess, T&P, and scaffolding required for the work etc.

complete in all respect as directed by the Engineer in

Digitally signed by JAYA

6 mm Plastering

Providing 6 mm thick cement plaster with cement mortar

of mix (1:4) with screened and washed sharp sand for

mortar and finished smooth to R.C.C. work after closed

deep chipping & slurry treatment including watering and

curing, rounding of corners, providing grooves where

ever necessary with cost, conveyance, royalties of all sqm 506.30 264.27 133802.06

materials with cost of all labour, T&P, and scaffolding

required for the work etc. complete in all respect as

directed by the Engineer in charge.

Vitrified Floor Tiles

thickness of min 10mm conforming to IS 13755 of

600x600 (homogeneous) of premium quality in floors,

treads on steps and landings on 20mm thick bed of

cement mortar of mix (1:4) laid in proper slope and

gradient with screened and washed sharp sand for mortar

and fixing with neat white cement slurry,grouting the

joints with neat white cement slurry mixed with required

quantities of pigments of approved make to match the sqm 592.48 1,453.04 860900.16

shades of the vitrified tile if required , watering and

curing for 21 days, including cost, conveyance, loading,

unloading, royalties and taxes of all materials, cost of all

labour,Labour cess, sundries, T&P required for the work,

complete in all respect as per specification and direction

of Engineer-in-charge

Vitrified Floor Skirting

Providing, fitting, fixing vitrified tiles of premium grade

having thickness 8mm to 10mm confirming to IS 13756

of size 600mm x 600mm Plain (Ivory) of approved make

as directed by Engineer-in-charge in dados skirting and

risers of steps on 12mm thick cement plaster (1:3) jointed

with neat cement slurry mixed with pigment to match the sqm 161.59 1556.05 251436.57

shades of the tiles including rubbing and polishing etc.

complete with cost, conveyance, royalties of all materials

all labour, labour cess complete in all respects.

Digitally signed by JAYA

10 MR UPVC DOOR

Supplying and fixing-Fixing of Un-plasticised poly vinyl

chloride (UPVC) Casenent Door-60-Series duly

manufactured using UPVC reinforced profiles of 60mm x

55mm x 2.5mm for outer frames 102mm x 60mm x

2.5mm casement Door Sash profile and 74mm x 60mm x

2.5mm mullion peofile capable of mounting single

glazing system, structurally reinforced with hot dip

galvanised up to 50 microns of minimum thickness of 2.0

mm prefabricated & welded through fusion welding the

door sash shall be fitted with 12mm thick WPC Board of

Greenply make duly fixed with EPDM weathering seal

resistant accessories like clipping locking system made of

aluminium 1 No. per set of sashes and th esystem isto be

installed at the site using anchor fasteners, silicon rubber

sealant,easy glazing/deglazing at site etc. including cost

and conveyance of all material, accessories, labour

charges, materials and product conforming to ASTM D

638-14,EN-447-95 and other applicable codes and

standards. (Ref.-Office of the Engineer-In-Chife (CIVIL),

Odisha Nirman Soudha,Bhubaneswar. Lt. No-16100)

11 MR UPVC WINDOWS

Providing and fixing of UPVC (Un Plasticized Poly

Vinyl Chloride) Sliding windows (Make: Fenstech) 2

Track Windows made out of hollow- chambered UPVC

Sections having isolated drainage and reinforced

throughout with galvanized steel. The 2 track outer frame

of the window shall be made out of UPVC sections

having an overall size of 60mm x 62mm x 2mm thickness

or Equivalent for shutter frames of 60mm x 45mm x

2mm thickness mounting single glazing system.

Structurally Reinforced with hot dip galvanized up to 50

microns of minimum thickness of 1.2mm with moldings

glazing Beading (up 5mm to 18mm) with interlocking

system. Prefabricated & welded through fusion welding

the window outer frame & sash shall be fitted with 5mm

thickness Clearglass of reputed brand (Saint Gobain sqm 107.72 5,307.26 571719.53

Glass) make duly fixed with EPDM rubber, weathering

sealant & Accessories like touch lock made by brand.

The outer frame & sash is to be installed at the side using

anchor fastener, Silicon Rubber Sealant, easy glazing at

the side. At least 15 years manufacturing warranty for

discoloration, wrapping, mechanical failures, Shrinkages,

Rooting Corrosion etc. with a quality Certificate from

relevant departments of that government through the

Dealers including of all materials and abounds etc.

Complete as per directions of Engineer in-

charge.Providing of 2 track 2 panel sliding Door Upvc

Sliding Windows duly made of Fenstech upvc FRAME

section 62mm x 60mm and SHUTRER section 45mm x

57mm,Solid & Inbuild

Synthetic Enamel gasket

Paint (Ironbeading.

Painting two coat with approved synthetic enamel paint sqm

to new iron work over a coat of Red oxide primer

including cost, conveyances, royalties, taxes of all

materials and cost of all labour with T&P required for the 215.45 312.46 67319.74

work etc. complete as per specification & direction of

Engineer in charge.

Digitally signed by JAYA

Synthetic Enamel Paint (Wood Work)

Painting two coat with approved synthetic enamel paint

to new wood work over a coat of Red oxide primer

including cost, conveyances, royalties, taxes of all

materials and cost of all labour with T&P required for the sqm 269.31 317.89 85611.49

work etc. complete as per specification & direction of

Engineer in charge.

Antifungal Weather Coat Paint

Wall painting two coats with Antifungal weather coat

paint (1st quality) exterior grade of approved make &

approved shade over a coat of primer to make an even

finished surface in all floors and heights with all

scaffolding and staging charges including cost, sqm 430.90 119.18 51354.19

conveyance, cost of all labours, T & P, sundries etc. as

required for the work complete in all respect as per the

direction of the Engineer-in-Charge.

Plastic Emulsion Paint

Painting two coats with plastic emulsion paint with a

approved quality primer to make an even finished

surface in all floors and heights to wall surface of

approved make and shade including sand papering,

applying putty wherever necessary & cost of scaffolding, sqm 430.90 128.54 55386.25

staging charges with cost, conveyance, cost of all

labour,labour cess, T&P etc. complete as per the

direction of the Engineer-in-charge.

Priming one coat with wall cement primer (water bound)

to make an even finished surface in all floors and heights

to wall surface of approved make and shade including

sand papering, applying putty wherever necessary & cost

of scaffolding, staging charges with cost, conveyance, sqm 377.03 97.47 36748.75

cost of all labour,labour cess T&P etc. complete as per

the direction of the Engineer-in-charge.

Finishing plastered surfaces of walls with cement based

wall putty (Water based) of approved make (JK White/

Birla white or equivalent make duly approved by

Engineer-in-Charge) and finishing the surface smooth

and even by sand papering to receive painting in walls, at

all heights with staging wherever necessary with cost, sqm 377.03 100.54 37905.49

conveyance, cost of all labour,labourcess, all T&P etc.

required for the work complete in all respect as per the

direction of the Engineer-in-charge.

Digitally signed by JAYA

ABSTRACT ESTIMATE FOR PROPOSED INFRASTRUCTURE DEVELOPMENT OF (ARTS COLLEGE

) DHAMNAGAR , BHADRAK,ODISHA

RENOVATION, PHE WORKS

OSR/MR Item of Work Unit Quantity Rate Amount

ADMINISTRATION BUILDING, PHE WORKS

1 A- Internal Sanitary & Plumbing System

Providing and fixing Chlorinated Polyvinyl Chloride

(CPVC) pipes conforming to IS:15778/ASTM Pipe,

having thermal stability for hot & cold water supply,

including all CPVC plain & brass threaded fittings

including fixing the pipe with clamps at 1.00 m spacing.

MR This includes jointing of pipes & fittings with one step

CPVC solvent cement and testing of joints complete as

per direction of Engineer-in-Charge

In ground floor

20mm dia C-PVC Pipes

2 MR 25mm dia C-PVC Pipes 50 Mtr 426.81 21340.30

3 MR 32mm dia C-PVC Pipes 30 Mtr 630.83 18924.84

4 In Terrace Floor

40mm dia C-PVC Pipes 25 Mtr 910.96 22774.00

5 MR 32mm dia C-PVC Pipes 40 Mtr 646.17 25846.72

6 Supplying all materials, labour, T&P and fitting and

fixing U-PVC SWR soil waste ventilating pipes and

fittings of the following outside diameter conforming to

ISI No. 13592/1992 to walls with nails, bobbins and

wooden plugs or laying in trenches including jointing

with supply of approved rubber lubricant by non-heat

MR application method/as per manufacturer’s specification,

testing, earthwork in excavation in all kinds of soil and

refilling of trenches as per specification and direction of

the Engineer in charge.

7 MR 75mm PVC plain bend 10 Each 217.12 2171.20

8 MR 75mm PVC socket plain 8 Each 95.93 767.47

9 MR 110mm SWR pipes 60 Mtr 582.33 34939.80

10 MR 110mm PVC 'P' trap 10 Each 586.81 5868.14

11 MR 110mm PVC socket plain 12 Each 188.92 2267.02

12 MR 110mm PVC plain bend 10 Each 273.76 2737.60

13 MR 110mm PVC door bend 8 Each 346.45 2771.58

14 MR 110mm PVC door Tee 12 Each 455.48 5465.76

15 MR 110mm PVC plain Tee 10 Each 380.79 3807.86

16 MR 110mm PVC door cross Tee 12 Each 650.42 7804.99

17 MR 110mm dia U-PVC Offset without ear 10 Each 480.73 4807.32

18 MR 110mm PVC vent cowl 15 Each 68.68 1030.14

19 MR 110mm PVC Clamp 45 Each 50.50 2272.68

20 Supply,Providing, fixing, testing and commissioning in

position UV stabilised 75 mm dia UPVC Rain water

pipe with Fittings (IS: 13592 Type - B). In case of

MR ceiling hanging, the supply of Pipe Clamps (Chilly/MS

angle) as per engineer in charge.110 mm diameter.

21 Supply,Providing and fixing 150 mm x 150 mm.dia CI

Grating for Rain water pipes 110 mm dia. 3 Each 110.57 331.70

Digitally signed by JAYA

22 Supplying all materials , labour, T&P and fixing

Vitreous china water closet ,squatting pan ( Indian type

W.C. pan / Orissa pattern squatting pan ) duly embedded

in cement concrete 1:5:10 using hard granite metal 4cm

nominal size including fixing a pair of vitreous china

250mmx130mmx30mm foot rest, fixing 100mm dia hci

'P' or 'S' trap for water closet squatting pan including

jointing the trap with pan in cement mortar (1:1), cutting

MR the floor and mending good the damages etc. all

complete as per P.H. specification and direction of

Engineer-in-charge .

580mmx440mm size Orissa Pan (White) 3 Each 3072.96 9218.87

23 Supplying all materials,labour,T&P and fitting and

fixing vitrous Chaina washed down water Closet

(European type water closet - EWC) with integral "P" or

"S" type trap to the floor including wodden plug and

chromoum plated screw including jointing the trap with

MR soil pipe in CM(1:1) fixing plastic seat cover for washed

down water closet with crmium plated brass hinges and

rubber buffers including polishing etc all complete as

per specification and direction of Engineer-in-charge.

European Water Clost "S" trap

24 Matrix Set -1 (WB 65 x 35 with one pair mounting

brackets, EWC & Cistern complete with fittings & seat

cover, one no hinged rail 76 cm and five nos of grab rails

25 Supplying all materials, labour, T&P and fitting and

fixing 10 litres capacity low level flushing cistern with a

pair of cast iron or M.S brackets complete with fittings

such as siphonic arrangements 15mm nominal size

brass/pvc ball valve with polythene float CP brass

handle, unions and couplings for connection with inlet,

outlet and overflow pipes,32mm dia CP flush

MR bend,15mm dia pvc inlet connection pipe including

cutting holes and making good the same and connecting

the flush bend with cistern and closet and connecting the

inlet pipe with supply main etc all complete as per

specification and direction of the Engineer in charge.

10 litres PVC L.L. Cistern (Slimline-white) with flush

26 Supplying all materials ,labour ,T&P and fixing Wash

basin with hole for pillar taps with cast iron or MS

brackets painted white including cutting holes in walls

and making good the damages with supply of wooden

plugs, screws and cement etc. fixing pedestral for wash

basin recessed at the back for the reception of pipes and

fittings, fixing PVC waste pipe of 32mm nominal

diameter for wash basin including brass check nut

complete, fixing pillar taps capstan head screw down

MR high pressure lettered 'Hot' and 'Cold' with long screws,

shanks and back nuts of 15mm dia nominal bore,

fixing15mm dia PVC inlet connection pipe and making

connection with pillar cocks and supply mains for wash

basin , fixing 12mm dia CP brass waste etc.all

complete as per specification and direction of Engineer-

550mmx400mm size wash hand basin with Porcelain

27 MR 550mmx400mm size Under counter wash basin 8 each 4283.40 34267.20

Digitally signed by JAYA

28 MR 32mm dia PVC waste pipe with brass coupling nut 9 each 59.59 536.31

29 MR 15mm dia PVC inlet connection pipe 0.45m long 9 Each 40.12 361.08

30 Supplying all materials,labour,T&P and Bowl pattern

urinal of the following sizes including connecting the

urinal with 32mm dia PVC waste pipe 910mm long by

means of white lead mixed with chopped hemp, fixing

32mm dia cp dome west,15mm dia cp spreader

MR including cutting holes in wall and making good the

damages with supply of wooden plugs,screws and

cement etc. all complete as per specification and

direction of the Engineer-in-charge.

31 MR Cost of 15mm dia urinal spreader 4 Each 338.19 1352.75

32 MR 32mm dia CP dome waste 4 Each 151.63 606.52

33 MR Pressmatic Stopcock-PRS-073 4 Each 3107.06 12428.23

34 Supplying all materials, labour, T&P and fitting and

fixing brass/CP fittings of the following nominal bore

with supply of all jointing materials complete as per

MR specification and direction of the Engineer in charge.

15mm dia CP 2way bib cock.

35 MR 15mm dia CP Health faucet 5 Each 1480.90 7404.50

36 MR 15mm dia CP Long Body Bib cock 8 Each 1916.44 15331.50

37 MR 15mm dia CP Angle stop cock 22 Each 1393.82 30663.95

38 MR 15mm dia CP Pillar cock 9 Each 2032.67 18294.01

39 MR 15mm dia CP extension piece 15 Each 69.97 1049.61

40 MR 15mm PVC Connection Pipe 13 Each 40.12 521.56

41 MR 32mm PVC Waste Discharge Pipe 13 Each 59.59 774.67

42 MR 15mm dia. C.P flange 50 Each 47.55 2377.70

43 MR 125mm dia CP gratting 30 Each 110.57 3316.98

44 Supplying all materials,labour,T&P and fixing standard

sized Glass-shelf with C.P brass bracket and guard rail

complete fixed to wooden pluges with screw etc.all

complete as per specification and direction of Engineer-

600mmx125mm size glass shelf with C.P ruard rail 6 Each 791.19 4747.14

45 Supplying all materials ,labour ,T&P and fixing

standard sized CP brass towel rail / Towel ring

complete with CP brass brackets fixed to wooden plugs

MR with chromium plated brass screws etc.all complete as

per specification and direction of Engineer-in-charge .

25mmx600mm long CP Towel rail

46 MR C P Towel Ring 9 Each 607.11 5463.99

47 Supplying all materials ,labour ,T&P and fixing CP

Soap Holder/ Soap Dispenser complete with CP brass

brackets fixed to wooden plugs with chromium plated

MR brass screws etc.all complete as per specification and

direction of Engineer-in-charge .

48 MR CP soap dispenser 9 Each 2584.32 23258.86

49 MR Toilet Roll Holder 8 Each 677.32 5418.56

50 Supplying all materials ,labour ,T&P and fixing Mirror

of superior glass mounted on 6mm thick A.C. sheet or

ply wood sheet and fixed to wooden plugs with

MR chromium plated brass screws and washers etc.all

complete as per specification and direction of Engineer-

Mirror (Bevelled edge) 600mmx450mm 11 Each 896.09 9857.01

Digitally signed by JAYA

51 Supplying all materials, labour, T&P and fitting and

fixing G.M/ Brass fittings of the following nominal bore

with supply of all jointing materials complete as per

specification and direction of the Engineer in charge.

25mm dia Brass F.W valve

52 MR 32mm dia Brass F.W valve 4 Each 1630.41 6521.62

53 MR 40mm dia Brass F.W valve 2 Each 1354.76 2709.52

54 MR 50mm dia CPVC Ball valve 2 Each 1063.18 2126.36

55 Supplying all materials, labour, T&P and providing

fitting and fixing Aquaguard PRO Thermapure 120 PSS

RO ACH which gives you Hot,Cold & Ambient purified

water.Aquaguard PEO Thermapure 120 PSS RO has

built-in-3 stage combinations,Tank Capacity

120Ltr.,Cold Water-80 Ltrs,Hot water-20 Ltrs.,Ambient

water-2- Ltrs.,Cooling capacity-60 LPH,Refrigerant-

HFC R134a,Cold water temperature-15 Deg.C+/-

1*,Heating coil wattage-2000W,Hot water temperature-

MR 50 Deg C+/-1,Thermal insulation-PUF,No of Faucets-1

Hot,1 Cold,1 Ambient,Tank,front panel and drain tray

MOC-SS304,Other body panels-Powder coated CRCA

Steel,No of filtration stages-7,RO Capacity-50

LPH*,RORecovery%-50%*,TDS Reject-90%*,

Dimentions (WxDxH)cm-75x72x144,Net weight-92

Kg.etc.all complete as per direction of the Engineer-in-

56 Supplying all materials,labour,T&P and fixing

Rotational moulded polyethylene cylindrical vertical

water storage tanks conforming to IS : 12701--1996

including cutting holes through the tank and fixing mild

steel tubes and fittings and providing extra sockets and

jam nuts, fixing ball valve etc, including hoisting upto a

height of 5 metres above ground level and placing the

tank to the required position and providing 1st class K.B

brickwork in cement mortar (1:6) of 0.46m height in

staging and in circular protection wall to support the

tank, 12mm thick cement plaster (1:6) over brickwork,

R.C.C slab of size 1.60mx1.60m and 0.10m thick, R.C.C

beam of 0.25mx0.30m and 2.60m average length in

cement concrete(1:2:4) using 12mm size h.g chips

including centering and shuttering, watering, curing,

conveyance of all materials to worksite etc all complete

as per specification and direction of the Engineer in

Fixing 2500Ltr Roto-moulded water storage 3 layer

tanks-In Terrace floor

57 Fixing 2000Ltr Roto-moulded water storage 3 layer

tanks-In Terrace floor 1 Each 38173.00 38173.00

58 Supplying all materials, labour, T&P and cutting hole in

R.C.C floors, roofs, etc upto 19 cm thick for passing

G.I. Pipes / P.V.C pipes and fittings etc and repairing the

holes after insertion of pipes etc with cement concrete

MR (1:2:4 ) including finishing complete so as to make it

leak proof as per direction of the Engineer in charge.

In Ground Floor

Digitally signed by JAYA

59 Supplying all materials, labour, T&P and cutting

grooves in pucca floors and walls for taking GI/ PVC

pipes and making good the damages as per the direction

of the Engineer in charge.

In Ground Floor

60 Supplying all materials,labour,T&P and laying in

trenches ( to level or slope ) unplasticized PVC pipe

conforming to IS:4985/2000 of the following outside dia

for class-3 (0.60mpa) including jointing with supply of

approved solvent cement by non-heat application

method/ as per manufactures's providing and laying in

trench cement concrete(1:4:8) with 40 mm size hard

granite metal in the Type-C-1 standard bedding

surrounding or encasing including concrete for bedding

MR and curing etc all complete as per PH specification and

direction of the Engineer-in-charge.

110mm dia U-PVC pipe ( Allround concrete )

61 MR 160mm dia U-PVC pipe ( Allround contrete ) 25 Mtr. 2680.84 67021.05

48 BEDDED GIRLS HOSTEL, PHE WORKS

1 A- Internal Sanitary & Plumbing System

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)

pipes conforming to IS:15778/ASTM Pipe, having thermal

stability for hot & cold water supply, including all CPVC

plain & brass threaded fittings including fixing the pipe with

MR clamps at 1.00 m spacing. This includes jointing of pipes &

fittings with one step CPVC solvent cement and testing of

joints complete as per direction of Engineer-in-Charge

In ground floor

20mm dia C-PVC Pipes

2 MR 25mm dia C-PVC Pipes 60 Mtr 426.81 25608.00

3 MR 32mm dia C-PVC Pipes 20 Mtr 630.83 12617.00

4 In Terrace Floor

40mm dia C-PVC Pipes 20 Mtr 910.96 18219.00

5 MR 32mm dia C-PVC Pipes 50 Mtr 646.17 32308.00

6 Supplying all materials, labour, T&P and fitting and fixing U-

PVC SWR soil waste ventilating pipes and fittings of the

following outside diameter conforming to ISI No. 13592/1992

to walls with nails, bobbins and wooden plugs or laying in

trenches including jointing with supply of approved rubber

MR lubricant by non-heat application method/as per

manufacturer’s specification, testing, earthwork in excavation

in all kinds of soil and refilling of trenches as per specification

and direction of the Engineer in charge. (Supreme, Astral,

75mm SWR pipes 110 Mtr 399.90 43989.00

7 MR 75mm PVC plain bend 12 Each 217.12 2605.00

8 MR 75mm PVC socket plain 15 Each 95.93 1439.00

9 MR 110mm SWR pipes 55 Mtr 582.33 32028.00

10 MR 110mm PVC 'P' trap 10 Each 586.81 5868.00

11 MR 110mm PVC socket plain 12 Each 188.92 2267.00

12 MR 110mm PVC plain bend 10 Each 273.76 2738.00

13 MR 110mm PVC door bend 8 Each 346.45 2772.00

14 MR 110mm PVC door Tee 15 Each 455.48 6832.00

15 MR 110mm PVC plain Tee 10 Each 380.79 3808.00

16 MR 110mm PVC door cross Tee 14 Each 650.42 9106.00

17 MR 110mm dia U-PVC Offset without ear 10 Each 480.73 4807.00

18 MR 110mm PVC vent cowl 20 Each 68.68 1374.00

19 MR 110mm PVC Clamp 40 Each 50.50 2020.00

Digitally signed by JAYA

20 Supply,Providing, fixing, testing and commissioning in

position UV stabilised 75 mm dia UPVC Rain water pipe with

Fittings (IS: 13592 Type - B). In case of ceiling hanging, the

supply of Pipe Clamps (Chilly/MS angle) as per engineer in

charge.110 mm diameter. (IS:13592, Type -B).

21 Supply,Providing and fixing 150 mm x 150 mm.dia CI

Grating for Rain water pipes 110 mm dia. 4 Each 110.57 442.00

22 Supplying all materials , labour, T&P and fixing Vitreous

china water closet ,squatting pan ( Indian type W.C. pan /

Orissa pattern squatting pan ) duly embedded in cement

concrete 1:5:10 using hard granite metal 4cm nominal size

including fixing a pair of vitreous china

MR 250mmx130mmx30mm foot rest, fixing 100mm dia hci 'P' or

'S' trap for water closet squatting pan including jointing the

trap with pan in cement mortar (1:1), cutting the floor and

mending good the damages etc. all complete as per P.H.

specification and direction of Engineer-in-charge .

580mmx440mm size Orissa Pan (White)

23 Supplying all materials,labour,T&P and fitting and fixing

vitrous Chaina washed down water Closet (European type

water closet - EWC) with integral "P" or "S" type trap to the

floor including wodden plug and chromoum plated screw

MR including jointing the trap with soil pipe in CM(1:1) fixing

plastic seat cover for washed down water closet with crmium

plated brass hinges and rubber buffers including polishing etc

all complete as per specification and direction of Engineer-in-

24 Matrix Set -1 (WB 65 x 35 with one pair mounting brackets,

EWC & Cistern complete with fittings & seat cover, one no

hinged rail 76 cm and five nos of grab rails 60 cm).

25 Supplying all materials, labour, T&P and fitting and fixing 10

litres capacity low level flushing cistern with a pair of cast

iron or M.S brackets complete with fittings such as siphonic

arrangements 15mm nominal size brass/pvc ball valve with

polythene float CP brass handle, unions and couplings for

connection with inlet, outlet and overflow pipes,32mm dia CP

MR flush bend,15mm dia pvc inlet connection pipe including

cutting holes and making good the same and connecting the

flush bend with cistern and closet and connecting the inlet pipe

with supply main etc all complete as per specification and

direction of the Engineer in charge.

10 litres PVC L.L. Cistern (Slimline-white) with flush bend .

26 Supplying all materials ,labour ,T&P and fixing Wash basin

with hole for pillar taps with cast iron or MS brackets painted

white including cutting holes in walls and making good the

damages with supply of wooden plugs, screws and cement etc.

fixing pedestral for wash basin recessed at the back for the

reception of pipes and fittings, fixing PVC waste pipe of

32mm nominal diameter for wash basin including brass check

nut complete, fixing pillar taps capstan head screw down high

MR pressure lettered 'Hot' and 'Cold' with long screws, shanks and

back nuts of 15mm dia nominal bore, fixing15mm dia PVC

inlet connection pipe and making connection with pillar cocks

and supply mains for wash basin , fixing 12mm dia CP brass

waste etc.all complete as per specification and direction of

Engineer-in-charge.

550mmx400mm size wash hand basin with Porcelain pedestal

27 550mmx400mm size Under counter wash basin

(Parryware/Hindware/Somay/Cera) 8 each 4283.40 34267.00

28 MR 32mm dia PVC waste pipe with brass coupling nut 8 each 59.59 477.00

29 MR 15mm dia PVC inlet connection pipe 0.45m long 8 Each 40.12 321.00

Digitally signed by JAYA

30 Supplying all materials, labour, T&P and fixing wash Kitchen

sink/ Laboratory sink with outlet at end and weir overflow

including fitting and fixing a pair of cast iron or MS brackets

painted white, fixing 50mm/40mm dia ss waste, fixing

MR 50mm/40mm dia PVC waste pipe 910mm long with supply of

wooden plugs, screws and cement etc including cutting holes

in walls and making good the damages etc all complete as per

specification and direction of the Engineer in charge.

600x450x250 mm stainless steel kitchen sink

31 Supplying all materials, labour, T&P and fitting and fixing

brass/CP fittings of the following nominal bore with supply of

MR all jointing materials complete as per specification and

direction of the Engineer in charge.

15mm dia CP 2way bib cock 5 Each 2526.26 12631.00

32 MR 15mm dia CP Health faucet 5 Each 1480.90 7405.00

33 MR 15mm dia CP Long Body Bib cock 13 Each 1916.44 24914.00

34 MR 15mm dia CP Angle stop cock 22 Each 1393.82 30664.00

35 MR Sink cock 1 Each 2700.43 2700.00

36 MR 15mm dia CP Pillar cock 11 Each 2032.67 22359.00

37 MR 15mm dia CP extension piece 18 Each 69.97 1260.00

38 MR 15mm PVC Connection Pipe 15 Each 40.12 602.00

39 MR 32mm PVC Waste Discharge Pipe 12 Each 59.59 715.00

40 MR 15mm dia. C.P flange 50 Each 47.55 2378.00

41 MR 125mm dia CP gratting 25 Each 110.57 2764.00

42 Supplying all materials,labour,T&P and fixing standard sized

Glass-shelf with C.P brass bracket and guard rail complete

fixed to wooden pluges with screw etc.all complete as per

specification and direction of Engineer-in-charge.

600mmx125mm size glass shelf with C.P ruard rail

43 Supplying all materials ,labour ,T&P and fixing standard

sized CP brass towel rail / Towel ring complete with CP

brass brackets fixed to wooden plugs with chromium plated

brass screws etc.all complete as per specification and

direction of Engineer-in-charge .

25mmx600mm long CP Towel rail 9 Each 881.81 7936.00

44 MR C P Towel Ring 11 Each 607.11 6678.00

45 Supplying all materials ,labour ,T&P and fixing CP Soap

Holder/ Soap Dispenser complete with CP brass brackets

fixed to wooden plugs with chromium plated brass screws

etc.all complete as per specification and direction of Engineer-

CP soap holder 18 Each 250.16 4503.00

46 MR CP soap dispenser 11 Each 2584.32 28427.00

47 MR Toilet Roll Holder 9 Each 677.32 6096.00

48 Supplying all materials ,labour ,T&P and fixing Mirror of

superior glass mounted on 6mm thick A.C. sheet or ply wood

sheet and fixed to wooden plugs with chromium plated brass

screws and washers etc.all complete as per specification and

direction of Engineer-in-charge.

Mirror (Bevelled edge) 600mmx450mm 11 Each 896.09 9857.00

49 Supplying all materials, labour, T&P and fitting and fixing

G.M/ Brass fittings of the following nominal bore with supply

MR of all jointing materials complete as per specification and

direction of the Engineer in charge.

25mm dia Brass F.W valve 15 Each 1113.21 16698.00

50 MR 32mm dia Brass F.W valve 4 Each 1630.41 6522.00

51 MR 40mm dia Brass F.W valve 2 Each 1354.76 2710.00

52 MR 50mm dia CPVC Ball valve 2 Each 1063.18 2126.00

Digitally signed by JAYA

53 Supplying all materials, labour, T&P and providing fitting and

fixing Aquaguard PRO Thermapure 120 PSS RO ACH which

gives you Hot,Cold & Ambient purified water.Aquaguard PEO

Thermapure 120 PSS RO has built-in-3 stage

combinations,Tank Capacity 120Ltr.,Cold Water-80 Ltrs,Hot

water-20 Ltrs.,Ambient water-2- Ltrs.,Cooling capacity-60

LPH,Refrigerant-HFC R134a,Cold water temperature-15

Deg.C+/-1*,Heating coil wattage-2000W,Hot water

MR temperature-50 Deg C+/-1,Thermal insulation-PUF,No of

Faucets-1 Hot,1 Cold,1 Ambient,Tank,front panel and drain

tray MOC-SS304,Other body panels-Powder coated CRCA

Steel,No of filtration stages-7,RO Capacity-50

LPH*,RORecovery%-50%*,TDS Reject-90%*, Dimentions

(WxDxH)cm-75x72x144,Net weight-92 Kg.etc.all complete

as per direction of the Engineer-in-charge.

54 Supplying all materials,labour,T&P and fixing Rotational

moulded polyethylene cylindrical vertical water storage tanks

conforming to IS : 12701--1996 including cutting holes

through the tank and fixing mild steel tubes and fittings and

providing extra sockets and jam nuts, fixing ball valve etc,

including hoisting upto a height of 5 metres above ground

level and placing the tank to the required position and

providing 1st class K.B brickwork in cement mortar (1:6) of

0.46m height in staging and in circular protection wall to

MR support the tank, 12mm thick cement plaster (1:6) over

brickwork, R.C.C slab of size 1.60mx1.60m and 0.10m thick,

R.C.C beam of 0.25mx0.30m and 2.60m average length in

cement concrete(1:2:4) using 12mm size h.g chips including

centering and shuttering, watering, curing, conveyance of all

materials to worksite etc all complete as per specification and

direction of the Engineer in charge.

Fixing 2500Ltr Roto-moulded water storage 3 layer tanks-In

Terrace floor 2 Each 44871.27 89743.00

55 Fixing 2000Ltr Roto-moulded water storage 3 layer tanks-In

Terrace floor Each 38173.00 38173.00

56 Supplying all materials, labour, T&P and cutting holes through

existing brick work including making good the damages in

cement mortar (1:4) for taking GI pipes and fittings/ PVC

pipes and fittings etc all complete as per PH specification and

direction of the Engineer in charge.

250mm thick wall in Ground floor 24 Each 73.75 1770.00

57 Supplying all materials, labour, T&P and cutting hole in

R.C.C floors, roofs, etc upto 19 cm thick for passing G.I.

Pipes / P.V.C pipes and fittings etc and repairing the holes

MR after insertion of pipes etc with cement concrete (1:2:4 )

including finishing complete so as to make it leak proof as per

direction of the Engineer in charge.

In Ground Floor 25 Each 253.35 6334.00

58 Supplying all materials, labour, T&P and cutting grooves in

pucca floors and walls for taking GI/ PVC pipes and making

good the damages as per the direction of the Engineer in

In Ground Floor

56 Supplying all materials,labour,T&P and laying in trenches ( to

level or slope ) unplasticized PVC pipe conforming to

IS:4985/2000 of the following outside dia for class-3

(0.60mpa) including jointing with supply of approved solvent

cement by non-heat application method/ as per manufactures's

MR providing and laying in trench cement concrete(1:4:8) with 40

mm size hard granite metal in the Type-C-1 standard bedding

surrounding or encasing including concrete for bedding and

curing etc all complete as per PH specification and direction

of the Engineer-in-charge.

110mm dia U-PVC pipe ( Allround concrete )

57 MR 160mm dia U-PVC pipe ( Allround contrete ) 20.00 Mtr. 2680.84 53617.00

LIBRARY BUILDING, PHE WORKS

Digitally signed by JAYA

1 A- Internal Sanitary & Plumbing System

Providing and fixing Chlorinated Polyvinyl Chloride

(CPVC) pipes conforming to IS:15778/ASTM Pipe,

having thermal stability for hot & cold water supply,

including all CPVC plain & brass threaded fittings

including fixing the pipe with clamps at 1.00 m spacing.

MR This includes jointing of pipes & fittings with one step

CPVC solvent cement and testing of joints complete as

per direction of Engineer-in-Charge

In ground floor

20mm dia C-PVC Pipes

2 25mm dia C-PVC Pipes 30 Mtr 426.81 12804.00

3 32mm dia C-PVC Pipes 20 Mtr 630.83 12617.00

4 In Terrace Floor

40mm dia C-PVC Pipes 20 Mtr 910.96 18219.00

5 32mm dia C-PVC Pipes 30 Mtr 646.17 19385.00

6 Supplying all materials, labour, T&P and fitting and

fixing U-PVC SWR soil waste ventilating pipes and

fittings of the following outside diameter conforming to

ISI No. 13592/1992 to walls with nails, bobbins and

wooden plugs or laying in trenches including jointing

with supply of approved rubber lubricant by non-heat

MR application method/as per manufacturer’s specification,

testing, earthwork in excavation in all kinds of soil and

refilling of trenches as per specification and direction of

the Engineer in charge.

7 MR 75mm PVC plain bend 8 Each 217.12 1737.00

8 MR 75mm PVC socket plain 6 Each 95.93 576.00

9 MR 110mm SWR pipes 40 Mtr 582.33 23293.00

10 MR 110mm PVC 'P' trap 4 Each 586.81 2347.00

11 MR 110mm PVC socket plain 10 Each 188.92 1889.00

12 MR 110mm PVC plain bend 8 Each 273.76 2190.00

13 MR 110mm PVC door bend 6 Each 346.45 2079.00

14 MR 110mm PVC door Tee 5 Each 455.48 2277.00

15 MR 110mm PVC plain Tee 6 Each 380.79 2285.00

16 MR 110mm PVC door cross Tee 10 Each 650.42 6504.00

17 MR 110mm dia U-PVC Offset without ear 8 Each 480.73 3846.00

18 MR 110mm PVC vent cowl 15 Each 68.68 1030.00

19 MR 110mm PVC Clamp 25 Each 50.50 1263.00

20 Supply,Providing, fixing, testing and commissioning in

position UV stabilised 75 mm dia UPVC Rain water

pipe with Fittings (IS: 13592 Type - B). In case of

ceiling hanging, the supply of Pipe Clamps (Chilly/MS

angle) as per engineer in charge.110 mm diameter.

21 Supply,Providing and fixing 150 mm x 150 mm.dia CI

Grating for Rain water pipes 110 mm dia. 2 Each 110.57 221.00

Digitally signed by JAYA

22 Supplying all materials , labour, T&P and fixing

Vitreous china water closet ,squatting pan ( Indian type

W.C. pan / Orissa pattern squatting pan ) duly embedded

in cement concrete 1:5:10 using hard granite metal 4cm

nominal size including fixing a pair of vitreous china

250mmx130mmx30mm foot rest, fixing 100mm dia hci

MR 'P' or 'S' trap for water closet squatting pan including

jointing the trap with pan in cement mortar (1:1), cutting

the floor and mending good the damages etc. all

complete as per P.H. specification and direction of

Engineer-in-charge .

580mmx440mm size Orissa Pan (White)

23 Supplying all materials,labour,T&P and fitting and

fixing vitrous Chaina washed down water Closet

(European type water closet - EWC) with integral "P" or

"S" type trap to the floor including wodden plug and

chromoum plated screw including jointing the trap with

MR soil pipe in CM(1:1) fixing plastic seat cover for washed

down water closet with crmium plated brass hinges and

rubber buffers including polishing etc all complete as

per specification and direction of Engineer-in-charge.

European Water Clost "S" trap

24 Matrix Set -1 (WB 65 x 35 with one pair mounting

brackets, EWC & Cistern complete with fittings & seat

cover, one no hinged rail 76 cm and five nos of grab rails

25 Supplying all materials, labour, T&P and fitting and

fixing 10 litres capacity low level flushing cistern with a

pair of cast iron or M.S brackets complete with fittings

such as siphonic arrangements 15mm nominal size

brass/pvc ball valve with polythene float CP brass

handle, unions and couplings for connection with inlet,

MR outlet and overflow pipes,32mm dia CP flush

bend,15mm dia pvc inlet connection pipe including

cutting holes and making good the same and connecting

the flush bend with cistern and closet and connecting the

inlet pipe with supply main etc all complete as per

specification and direction of the Engineer in charge.

26 Supplying all materials ,labour ,T&P and fixing Wash

basin with hole for pillar taps with cast iron or MS

brackets painted white including cutting holes in walls

and making good the damages with supply of wooden

plugs, screws and cement etc. fixing pedestral for wash

basin recessed at the back for the reception of pipes and

fittings, fixing PVC waste pipe of 32mm nominal

diameter for wash basin including brass check nut

complete, fixing pillar taps capstan head screw down

MR high pressure lettered 'Hot' and 'Cold' with long screws,

shanks and back nuts of 15mm dia nominal bore,

fixing15mm dia PVC inlet connection pipe and making

connection with pillar cocks and supply mains for wash

basin , fixing 12mm dia CP brass waste etc.all

complete as per specification and direction of Engineer-

27 MR 550mmx400mm size Under counter wash basin 4 each 4283.40 17134.00

28 MR 32mm dia PVC waste pipe with brass coupling nut 4 each 59.59 238.00

29 MR 15mm dia PVC inlet connection pipe 0.45m long 4 Each 40.12 160.00

Digitally signed by JAYA

30 Supplying all materials,labour,T&P and Bowl pattern

urinal of the following sizes including connecting the

urinal with 32mm dia PVC waste pipe 910mm long by

means of white lead mixed with chopped hemp, fixing

32mm dia cp dome west,15mm dia cp spreader

MR including cutting holes in wall and making good the

damages with Supply of wooden plugs,screws and

cement etc. all complete as per specification and

direction of the Engineer-in-charge.

31 MR Cost of 15mm dia urinal spreader 2 Each 338.19 676.38

32 MR 32mm dia CP dome waste 2 Each 151.63 303.26

33 MR Pressmatic Stopcock-PRS-073 2 Each 3107.06 6214.12

34 Supplying all materials, labour, T&P and fitting and

fixing brass/CP fittings of the following nominal bore

with supply of all jointing materials complete as per

specification and direction of the Engineer in charge.

15mm dia CP 2way bib cock

35 MR 15mm dia CP Health faucet 2 Each 1480.90 2962.00

36 MR 15mm dia CP Long Body Bib cock 4 Each 1916.44 7666.00

37 MR 15mm dia CP Angle stop cock 12 Each 1393.82 16726.00

38 MR 15mm dia CP Pillar cock 4 Each 2032.67 8131.00

39 MR 15mm dia CP extension piece 8 Each 69.97 560.00

40 MR 15mm PVC Connection Pipe 8 Each 40.12 321.00

41 MR 32mm PVC Waste Discharge Pipe 8 Each 59.59 477.00

42 MR 15mm dia. C.P flange 25 Each 47.55 1189.00

43 MR 125mm dia CP gratting 10 Each 110.57 1106.00

44 Supplying all materials,labour,T&P and fixing standard

sized Glass-shelf with C.P brass bracket and guard rail

complete fixed to wooden pluges with screw etc.all

complete as per specification and direction of Engineer-

600mmx125mm size glass shelf with C.P ruard rail 4 Each 791.19 3165.00

45 Supplying all materials ,labour ,T&P and fixing

standard sized CP brass towel rail / Towel ring

complete with CP brass brackets fixed to wooden plugs

MR with chromium plated brass screws etc.all complete as

per specification and direction of Engineer-in-charge .

25mmx600mm long CP Towel rail

46 MR C P Towel Ring 4 Each 607.11 2428.00

47 Supplying all materials ,labour ,T&P and fixing CP

Soap Holder/ Soap Dispenser complete with CP brass

brackets fixed to wooden plugs with chromium plated

MR brass screws etc.all complete as per specification and

direction of Engineer-in-charge .

48 MR CP soap dispenser 4 Each 2584.32 10337.00

49 MR Toilet Roll Holder 4 Each 677.32 2709.00

50 Supplying all materials ,labour ,T&P and fixing Mirror

of superior glass mounted on 6mm thick A.C. sheet or

ply wood sheet and fixed to wooden plugs with

MR chromium plated brass screws and washers etc.all

complete as per specification and direction of Engineer-

Mirror (Bevelled edge) 600mmx450mm 4 Each 896.09 3584.00

Digitally signed by JAYA

51 Supplying all materials, labour, T&P and fitting and

fixing G.M/ Brass fittings of the following nominal bore

with supply of all jointing materials complete as per

specification and direction of the Engineer in charge.

25mm dia Brass F.W valve

52 MR 32mm dia Brass F.W valve 2 Each 1630.41 3261.00

53 MR 40mm dia Brass F.W valve 2 Each 1354.76 2710.00

54 MR 50mm dia CPVC Ball valve 2 Each 1063.18 2126.00

55 Supplying all materials, labour, T&P and providing

fitting and fixing Aquaguard PRO Thermapure 120 PSS

RO ACH which gives you Hot,Cold & Ambient purified

water.Aquaguard PEO Thermapure 120 PSS RO has

built-in-3 stage combinations,Tank Capacity

120Ltr.,Cold Water-80 Ltrs,Hot water-20 Ltrs.,Ambient

water-2- Ltrs.,Cooling capacity-60 LPH,Refrigerant-

HFC R134a,Cold water temperature-15 Deg.C+/-

1*,Heating coil wattage-2000W,Hot water temperature-

MR 50 Deg C+/-1,Thermal insulation-PUF,No of Faucets-1

Hot,1 Cold,1 Ambient,Tank,front panel and drain tray

MOC-SS304,Other body panels-Powder coated CRCA

Steel,No of filtration stages-7,RO Capacity-50

LPH*,RORecovery%-50%*,TDS Reject-90%*,

Dimentions (WxDxH)cm-75x72x144,Net weight-92

Kg.etc.all complete as per direction of the Engineer-in-

56 Supplying all materials,labour,T&P and fixing

Rotational moulded polyethylene cylindrical vertical

water storage tanks conforming to IS : 12701--1996

including cutting holes through the tank and fixing mild

steel tubes and fittings and providing extra sockets and

jam nuts, fixing ball valve etc, including hoisting upto a

height of 5 metres above ground level and placing the

tank to the required position and providing 1st class K.B

brickwork in cement mortar (1:6) of 0.46m height in

staging and in circular protection wall to support the

tank, 12mm thick cement plaster (1:6) over brickwork,

R.C.C slab of size 1.60mx1.60m and 0.10m thick, R.C.C

beam of 0.25mx0.30m and 2.60m average length in

cement concrete(1:2:4) using 12mm size h.g chips

including centering and shuttering, watering, curing,

conveyance of all materials to worksite etc all complete

as per specification and direction of the Engineer in

Fixing 2500Ltr Roto-moulded water storage 3 layer

tanks-In Terrace floor

57 Supplying all materials, labour, T&P and cutting holes

through existing brick work including making good the

damages in cement mortar (1:4) for taking GI pipes and

MR fittings/ PVC pipes and fittings etc all complete as per

PH specification and direction of the Engineer in charge.

250mm thick wall in Ground floor

Digitally signed by JAYA

58 Supplying all materials, labour, T&P and cutting hole in

R.C.C floors, roofs, etc upto 19 cm thick for passing

G.I. Pipes / P.V.C pipes and fittings etc and repairing the

holes after insertion of pipes etc with cement concrete

MR (1:2:4 ) including finishing complete so as to make it

leak proof as per direction of the Engineer in charge.

In Ground Floor

59 Supplying all materials, labour, T&P and cutting

grooves in pucca floors and walls for taking GI/ PVC

pipes and making good the damages as per the direction

MR of the Engineer in charge.

In Ground Floor

60 Supplying all materials,labour,T&P and laying in

trenches ( to level or slope ) unplasticized PVC pipe

conforming to IS:4985/2000 of the following outside dia

MR for class-3 (0.60mpa) including jointing with supply of

approved solvent cement by non-heat application

method/ ) as per manufactures's providing and laying in

trench cement concrete(1:4:8) with 40 mm size hard

granite metal in the Type-C-1 standard bedding

surrounding or encasing including concrete for bedding

MR and curing etc all complete as per PH specification and

direction of the Engineer-in-charge.

110mm dia U-PVC pipe ( Allround concrete

61 MR 160mm dia U-PVC pipe ( Allround contrete ) 15 Mtr. 2680.84 40213.00

Digitally signed by JAYA

PROJECT NAME: PROPOSED INFRASTRUCTURE DEVELOPMENT OF (ARTS COLLEGE ) DHAM NAGAR ,

RENOVATION, ELECTRICAL WORKS

Sl.No. Description of work Unit Qty. Rate Amount

AIR CONDITIONER

1 MR Supply of AC with indoor and outdoor unit 1.5 TR high wall 3 star

non inverter type split A.C machine (BTU/Hr-18000) with copper

condensor & evaporator having ambient temperature 52 degree

celcius with comprehensive 1 year warranty,5 years warranty on

PCB, 5 years warranty on compressor. (Make:Toshiba/ Carrier/

Diakin/ LG/ Hitachi) 12 Each 70,448.36 8,45,380.32

REFRIGRANT PIPING -

2 Supply,installation of hard/soft copper refregrant piping of size 5/8

inch and 1/4 inch for suction and liquid line with 3 corex4 sqmm

FRLS Copper control cable alongwith 25 mm weather proof closed

cell nitrile insulation ,complete with fitting of bends and other

nesessary material to complete the job. -

a) MR 1.5 TR high wall split A.C 36 Mtr 1,416.00 50,976.00

3 Supply,installation & fabrication of MS base frame for both indoor

and outdoor unit and other nesessary material to complete the job.

a) MR 1.5TR high wall split A.C 12 Nos 1,062.00 12,744.00

DRAIN PIPING -

4 Supply,installation & fabrication of Insulated drain water piping

from indoor to nearestdrain point separate to all and other nesessary

material to complete the job. -

a) MR 25mm dia pipe 36 Mtr 179.36 6,456.96

5 Supply, laying of 3 core x 4 sqmm FRLS control cable and other

nesessary material to complete the job. (Make:- Polycab/ RR Kabel/

a) MR For 1TR to 3TR high wall split A.C. 24 Mtr 145.14 3,483.36

6 MR Supply and fixing of Single phase 4kVA Voltage stabilizer (130-

230V). (Make-V-Guard/ Microtek) 12 Nos 9,383.36 1,12,600.32

Digitally signed by JAYA