Providing functional House Hold tap (FHTC) connection in village Dhameta Samkar Bari Khas etc. through proposed LWSS Dhameta Samkar in Tehisl Fatehpur Distt. Kangra (HP) Under JAL JEEVAN MISSION

Amount

Excavation in foundation treanches(Pipe & Pits) up to all depths in all classification of earth work such as pick work,jumper work,saturated soil including bailing or pumping out water,blasting soft /hard rock where blasting is prohibited in all lifts including trimming & dressing of sides leveling of beds to correct grade i/c shoring/strutting planking,timbering & dewatering wherever required stacking the usable & unusable material/soil separately & after laying,jointing & testing of pipes,returning the useable soil in trenches in 15cm layers including consolidating of such deposited layer by raming & watering & then disposing of all surplus excavated soil/unusable material as directed with in all leads & lifts including restoration of unmetalled surface to its original condition & including cost of diversion for traffic,night signals,fixing caution boards,crossing over trenches for access to houses,fencing etc.completein all respects with in all leads & lifts as per directions of Engineer-in-Charge.

Laying and jointing in trenches to be levelled to grade, BIS marked GI flanged pipes confirming to BIS:1239 (latest with upto date ammendments) of Following specified diameters (Medium class) duly flanged after 5th pipe with intermediate butt welded joints including the cost of flanges, bends/short pieces made from parent tubes of diferent degrees cutting welding and jointing with flanges conforming to tables as specified below of BIS: 6392 (latest with upto date ammendments) welded at both ends as per BIS:816 (latest with upto date ammendments) with electrodes confirming to BIS 814 (latest with upto date ammendments) & provided with nuts and bolts BIS: 1369 (latest with upto date ammendments) of required sizes 4 mm thick champion make compressed asbestos fiber gasket or synthetic rubber gasket confirming to BIS:2712 (latest with upto date ammendments) & approved specifications as per site conditions including flushing, cleaning & hydraulic testing complete to the best satisfaction of Engineer-in-charge.

Stage-I

GMS pipe (Med. Class) 125 mm dia. Table-5.

Stage-II

GMS pipe (Med. Class) 80 mm dia. Table-5.

GMS pipe (Med. Class) 80 mm dia. Table-17.

GMS pipe (Med. Class) 50 mm dia. Table-5.

GMS pipe (Med. Class) 50 mm dia. Table-17.

Pumping Machinery (Submersible Pumping Machinery)

Stage -I:- Tube Well to Collection Tank

Supply of submersible pumping set of (KSB /Calama/Sabar/Kirloskar/SU/Johnson/Cromption/BS) make conforming to BIS; 8034-1976 latest suitable for lifting clear water (latest with uptodate ammendments) fitted with bronze impellers/suitable alloy directly coupled to squirrell case electric induction motor of same make as (manufacurer standard) conforming to BIS; 9283-1979 (latest with uptodate ammendments) and totally water proof for submersible duty, isolated from the pump by intermediate casing with double mechanical seal in oil chamber, grease packed lubricated bearings & provided with stainless steel thrust bearing plate to with stand vertical loads with minimum wear & tear. It should also be fitted with a device to take up expansion of water with the heating of motor including water level guard,errection clamps,cable clips & depth gauge etc. The pump shall be suitable for operation on data given below:-

Total Head: 60.105

Discharge required from each pump : 7.50 LPS

No. of pump required : 2.00 Nos. One act as stand by

Location of the site of installation of machinery : The site is located near Bharmar Railway Station

The Altitude of installation : The altitude of place is 350 mtrs above MSL

Type of current : AC Three phase supply with

Rate Voltage : 415+ 10%

Type of water and its source: 1/29/2020 Clear water from T/Well

Charactristics of water. a)Ambient Temperature dig.c : 20 dig. C b)Turbidity NTU : 10NTU c)Hardness260Mg/Ltrs(as CaCO3) d) PH 7.5 e)total solid Mg /Ltrs f)Other

Depth of Tube/Well : 125.00 mtrs.

LWL in Tube well :- 35.00 mtrs. BGL

Center line level of Pump :- 36.00 mtrs. BGL

Discharge level of highest point:- 394.00 mtrs. Above MSL

Static head in Mrs :- 40.00 mtrs.

Length of R/Main : 815 mtrs

Dia of Rising main : 125 MM GI pipe

No of working hours per day : 16 Hours

Limit of pump operation : (-) 15 % (+) 10% of total head

R.P.M. of pumping set : 2900 RPM ( or to be specified by the tenderer) : 2900 RPM ( or to be specified by the tenderer)

Test run : 8 Hours continueously for 7 days

Supply of Kirloskar/Kilburn /IVC/Fouress/Gled/BHEL/ Leader make Cast lron double flanged sluice valve of Class PN 1.0 confirming to BIS-14846-2000 (to be provided on delivery side) of equal size to one dia more than the dia of delivery of pump and capable of with standing nominal seat test pressure of 1.0 kg/cm². (size of valve shall be specified by the tanderer)

Supply of Kirloskar/ Kilburn/IVC/Fouress /Gled/BHEL/Leader make Cast Iron double flanged swing check type reflux valve having bypass arrangement of Class PN 1.0 confirming to BS 5312-1984 (latest edition)to be provided on Rising main) of 80 mm and shall be suitable for withstanding nominal seat pressure of 1.6 kg/cm². (size of valve shall be specified by the tanderer)

Providing & laying PVC insulated jointless, flat water proof copper cable of Siemens/Finolex/Grandlay/Gloster make conforming to BIS:1554 (Part I) -1988 or latest with up to date ammendments of suitable size for the pump sets offered(one cable carrying all three phases) including all other electrical equipment /accessories such as thimbles ,flexible pipe, solder, nuts & bolts cable glands etc. laid in pipes or trenches under floor. The type,size & make will be subject to approval of HPSEB authorities.In case of non acceptance by HPSEB authorities it shall have to be replaced by the tenderer free of cost. (size of cable shall be specified by the tanderer)

On motor side 3.5 core flat joint less copper cable of size 6.00 mm^2 ( From Switch & Starter to Motor) pump installed in the bore (size of cable shall be specified by the tanderer)

Supply & errection of floor/wall mounted power shunt capacitor conforming to BIS 2834-1986 latest with upto date ammendments of GEC/Siemen/ Havells L&T make to raise the prevailing power factor at site to 0.95 for direct connection to induction motor individually of requirement KVAR according to BHP of motor offered including cable Siemens/Gloster/ICC make from busbar chamber to capacitor & also including Standard/ L&T/Kilburn/Indo asian make ICTP switches conforming to BIS 4064- 4064-1978 or latest with HRC fuses. (range to be specified by the tenderer.)

Supply of standarad make 100 mm dia circular/square dial pressure gauge of suitable range Fiebeg/Bourden/ Precision make with all accessories such as stop cock,copper tubing etc. conforming to BIS 3624-1987 latest with up to date ammendments.

P/L G.I./MSERW pipe considering site requirements and having appropriate size in accordance with the delivery size of pumping set . The pipe shall conform to relevant BIS codes & capable of with standing the feild test pressure equal to 1.5 times the operating pressure including all type of fittings such as bends, tapers/ reducers, flanges, rubber gaskets 3mmthick, nuts & bolts and any other fitting required at site and work shall be to the entire satisfaction of Engineer-in-Charge. The pipe material shall conform to relevant BIS Code and capable of with standing FTP equal to 1.5 times the operating pressure the complete arrangement shall compromise of

Column Assembly XXX mm dia = to be specified by the Tenderer

NOTE:- Actual laying to be done as per final drawings to be approved by the Engineer in charge Errection of all equipments including cost of tees,bends tapers & any other fittings required as per site conditions & as per directions of Engineer-in-Charge.

Pumping Machinery (Centrifugal Pumping Machinery)

Stage-2nd from Node-2 to Node-3

Supply of horizontal spindle,horizontal/radial split casing and suction (backpull out arrangement) single/ double / multistage centrifugal pumps or combination of pumps in series /parallel of KSB / Mather & Platt/ Jyoti /Kirloskar /BE /Maxflow/ SU/Beaconweir Sabar make conforming to BIS: 1520-1980 (latestwith upto date ammendments) read with BIS: 9137-1978 (latest edition) suitable for lifting water of under mentioned charactristics with impellers of bronze/suitable alloy, priming funnels,casing ring & shaft sleeves of bronze/ suitable alloy, shaft of sutable steel grade with cast iron casing coupled directly through a flexible coupling on a common C.I. / Cast steel base plate (base plate to be from the principle manufacturer of pumping set) to slippering/squirrel cage screen protected drip proof electric induction motor of Kirlokar /NGEF/Crompton / Siemen /Jyoti /BHEL /GEC /ABB conforming to BIS: 325-1978 read read with BIS: 900-1968 (latest with upto date ammendments) It should include the cost of bearings, nuts & bolts,painting etc. and shall be suitable for operation as per data given below.

Total Head : 116.72 Mtrs.

Discharge required from each pump :2.97 lps

No. of pump required : 2.00 Set (One act as stand by)

Location of the site of installation of machinery : The site is located near Bharmar Railway Station

The altitude of installation :390 MSL.

Type of current : AC three phase supply with freqduency of 75cycle per second.

Rate Voltage : 415V + 10%

Type of water and its source : Clear water. Shaft level : 390.00 Level of discharge point : 491.00 Static Head : 101.00

Charactristics of water. a)Ambient Temperature dig.c b)Turbidity NTU c)Hardness260Mg/Ltrs(as CaCO3) d) PH 7.5 e)Total solid Mg /Ltrs f)Other Depth of well assembly

No. of working hours per day : 16.00Hours.

Length of Rising main : 1150 Rmts.

Dia of Rising main : 80 mm G.I. pipe

Limit of pump operation : In the completem Range of (-)75% .

R.P.M. of pumping set : 2900 RPM (or to be specified by the tenderer).

Test run : 8 Hours contineously for 7 days.

Supply of Kirloskar/Kilburn /IVC/Fouress/Gled/BHEL/ Leader make Cast lron double flanged sluice valve of Class PN 1.6 confirming to BIS-14846-2000 (to be provided on delivery side) of equal size to one dia more than the dia of delivery of pump and capable of with standing nominal seat test pressure of 1.6 kg/cm². (the size of valve shall be specified by the tanderer)

Supply of Kirloskar/ Kilburn/IVC/Fouress /Gled/BHEL/Leader make Cast Iron double flanged swing check type reflux valve having bypass arrangement of Class PN 1.6 confirming to BS 5312-1984 (latest edition)to be provided on Rising main) and shall be suitable for withstanding nominal seat pressure of 1.6 kg/cm². (the size of valve shall be specified by the tanderer)

Supply of Kirloskar/ Kilburn/IVC/Fouress /Gled/BHEL/Leader make Cast Iron double flanged swing check type reflux valve having bypass arrangement of Class PN 1.6 confirming to BS 5312-1984 (latest edition)to be provided on Rising main) and shall be suitable for withstanding nominal seat pressure of 1.6 kg/cm². (the size of valve shall be specified by the tanderer)

Supply of Kirloskar/ Kilburn/IVC/Fouress /Gled/BHEL/Leader make Cast Iron double flanged sluice valve having bypass arrangement of Class PN 1.6 confirming to BIS 14846-2000 (latest edition)to be provided on suction side of size one dia higher than the suction size of pump capable of withstanding nominal seat pressure of 10.2 kg/cm².

Providing & laying PVC insulated jointless, flat water proof copper cable of Siemens/Finolex/Grandlay/Gloster make conforming to BIS:1554 (Part I) -1988 or latest with up to date ammendments of suitable size for the pump sets offered(one cable carrying all three phases) including all other electrical equipment /accessories such as thimbles ,flexible pipe, solder, nuts & bolts cable glands etc. laid in pipes or trenches under floor. The type,size & make will be subject to approval of HPSEB authorities.In case of non acceptance by HPSEB authorities it shall have to be replaced by the tenderer free of cost. (the size of cable shall be specified by the tanderer)

Onsupply side of 3.5 core copper cabe 10mm2 from HPSEBL to switch and starter

On motor side 3 core flat jointless copper cable of size 6mm2 (from switch starter to motor) pump installed in the bore.

Supply & errection of floor/wall mounted power shunt capacitor conforming to BIS 2834-1986 latest with upto date ammendments of GEC/Siemen/ Havells L&T make to raise the prevailing power factor at site to 0.95 for direct connection to induction motor individually of requirement KVAR according to BHP of motor offered including cable Siemens/Gloster/ICC make from busbar chamber to capacitor & also including Standard/ L&T/Kilburn/Indo asian make ICTP switches conforming to BIS 4064- 4064-1978 or latest with HRC fuses. (range to be specified by the tenderer.)

Supply of standarad make 100 mm dia circular/square dial pressure gauge of suitable range Fiebeg/Bourden/ Precision make with all accessories such as stop cock,copper tubing etc. conforming to BIS 3624-1987 latest with up to date ammendments.

P/L G.I./MSERW pipe considering site requirements and having appropriate size in accordance with the delivery size of pumping set . The pipe shall conform to relevant BIS codes & capable of with standing the feild test pressure equal to 1.5 times the operating pressure including all type of fittings such as bends, tapers/ reducers, flanges, rubber gaskets 3mmthick, nuts & bolts and any other fitting required at site and work shall be to the entire satisfaction of Engineer-in-Charge. The pipe material shall conform to relevant BIS Code and capable of with standing FTP equal to 1.5 times the operating pressure the complete arrangement shall compromise of

Suction pipe XXX mm dia = to be specified by the Tenderer

Delivery pipe XXX mm dia = to be specified by the Tenderer

Common Header= 125mm dia NOTE:- Actual laying to be done as per final drawings to be approved by the Engineer in charge

Providing and lying double loop earthing with coper plate 600x600 x3 thick electrode and copper strip of 25x3 complete including providing of material such as charcoal, common salt, GI pipes, thimbles, nuts & bolts, digging of pits, Copper /GI wire/ Strips of required capacity conforming to BIS 8034-1978 latest with upto date ammendments for above motor & other electriacl equipments including all civil works. (for both machineries).Note. The strip size shall be 20x3 upto 18.5 KW . 25x3 for 18.5 to 37 KW to 55 KW and 32x5 beyond 55 KW.

Errection of all equipments including cost of tees,bends tapers & any other fittings required as per site conditions & as per directions of Engineer-in-Charge.

Stage-2nd from Node-2 to Node-32 Supply of horizontal spindle,horizontal/radial split casing and suction (backpull out arrangement) single/ double / multistage centrifugal pumps or combination of pumps in series /parallel of KSB / Mather & Platt/ Jyoti /Kirloskar /BE /Maxflow/ Beaconweir Sabar make conforming to BIS: 1520-1980 (latestwith upto date ammendments) read with BIS: 9137-1978 (latest edition) suitable for lifting water of under mentioned charactristics with impellers of bronze/suitable alloy, priming funnels,casing ring & shaft sleeves of bronze/ suitable alloy, shaft of sutable steel grade with cast iron casing coupled directly through a flexible coupling on a common C.I. / Cast steel base plate (base plate to be from the principle manufacturer of pumping set) to slippering/squirrel cage screen protected drip proof electric induction motor of Kirlokar /NGEF/Crompton / Siemen /Jyoti /BHEL /GEC /ABB conforming to BIS: 325-1978 read read with BIS: 900-1968 (latest with upto date ammendments) It should include the cost of bearings, nuts & bolts,painting etc. and shall be suitable for operation as per data given below.

Total Head : 62.554 Mtrs.

Discharge required from each pump : 3.33 lps

No. of pump required : 2.00 Set (One act as stand by)

Location of the site of installation of machinery : The site is located near Mandapra.

The altitude of installation : 380 MSL.

Type of current : AC three phase supply with freqduency of 75cycle per second.

Rate Voltage : 415V + 10%

Type of water and its source : Clear water. Shaft level : 390.00 Level of discharge point : 444.00 Static Head : 54.00

Charactristics of water. a)Ambient Temperature dig.c b)Turbidity NTU c)Hardness260Mg/Ltrs(as CaCO3) d) PH 7.5 e)Total solid Mg /Ltrs f)Other Depth of well assembly

No. of working hours per day : 16.00Hours.

Length of Rising main : 1150 Rmts.

Dia of Rising main : 380 mm G.I. pipe

Limit of pump operation : In the completem Range of (-)75% .

R.P.M. of pumping set : 2900 RPM (or to be specified by the tenderer).

Test run : 8 Hours contineously for 7 days.

Supply of Kirloskar/Kilburn /IVC/Fouress/Gled/BHEL/ Leader make Cast lron double flanged sluice valve of Class PN 1.0 confirming to BIS-14846-2000 (to be provided on delivery side) of equal size to one dia more than the dia of delivery of pump and capable of with standing nominal seat test pressure of 10.20 kg/cm². (the size of valve shall be specified by the tanderer)

Supply of Kirloskar/ Kilburn/IVC/Fouress /Gled/BHEL/Leader make Cast Iron double flanged swing check type reflux valve having bypass arrangement of Class PN 1.0 confirming to BS 5312-1984 (latest edition)to be provided on Rising main) and shall be suitable for withstanding nominal seat pressure of 1.6 kg/cm². (the size of valve shall be specified by the tanderer)

Supply of Kirloskar/ Kilburn/IVC/Fouress /Gled/BHEL/Leader make Cast Iron double flanged swing check type reflux valve having bypass arrangement of Class PN 1.6 confirming to BS 5312-1984 (latest edition)to be provided on Rising main) of 125 mm dia and shall be suitable for withstanding nominal seat pressure of 10.20 kg/cm². (the size of valve shall be specified by the tanderer)

Supply of Kirloskar/ Kilburn/IVC/Fouress /Gled/BHEL/Leader make Cast Iron double flanged sluice valve having bypass arrangement of Class PN 1.6 confirming to BIS 14846-2000 (latest edition)to be provided on suction side of size one dia higher than the suction size of pump capable of withstanding nominal seat pressure of 10.2 kg/cm².

Providing & laying PVC insulated jointless, flat water proof copper cable of Siemens/Finolex/Grandlay/Gloster make conforming to BIS:1554 (Part I) -1988 or latest with up to date ammendments of suitable size for the pump sets offered(one cable carrying all three phases) including all other electrical equipment /accessories such as thimbles ,flexible pipe, solder, nuts & bolts cable glands etc. laid in pipes or trenches under floor. The type,size & make will be subject to approval of HPSEB authorities.In case of non acceptance by HPSEB authorities it shall have to be replaced by the tenderer free of cost. (the size of cable shall be specified by the tanderer)

Onsupply side of 3.5 core copper cabe 10mm2 from HPSEBL to switch and starter

On motor side 3 core flat jointless copper cable of size 6mm2 (from switch starter to motor) pump installed in the bore.

Supply & errection of floor/wall mounted power shunt capacitor conforming to BIS 2834-1986 latest with upto date ammendments of GEC/Siemen/ Havells L&T make to raise the prevailing power factor at site to 0.95 for direct connection to induction motor individually of requirement KVAR according to BHP of motor offered including cable Siemens/Gloster/ICC make from busbar chamber to capacitor & also including Standard/ L&T/Kilburn/Indo asian make ICTP switches conforming to BIS 4064- 4064-1978 or latest with HRC fuses. (range to be specified by the tenderer.)

Supply of standarad make 100 mm dia circular/square dial pressure gauge of suitable range Fiebeg/Bourden/ Precision make with all accessories such as stop cock,copper tubing etc. conforming to BIS 3624-1987 latest with up to date ammendments.

P/L G.I./MSERW pipe considering site requirements and having appropriate size in accordance with the delivery size of pumping set . The pipe shall conform to relevant BIS codes & capable of with standing the feild test pressure equal to 1.5 times the operating pressure including all type of fittings such as bends, tapers/ reducers, flanges, rubber gaskets 3mmthick, nuts & bolts and any other fitting required at site and work shall be to the entire satisfaction of Engineer-in-Charge. The pipe material shall conform to relevant BIS Code and capable of with standing FTP equal to 1.5 times the operating pressure the complete arrangement shall compromise of

Suction pipe XXX mm dia = to be specified by the Tenderer

Delivery pipe XXX mm dia = to be specified by the Tenderer

Common Header= 125mm dia

NOTE:- Actual laying to be done as per final drawings to be approved by the Engineer in charge Providing and lying double loop earthing with coper plate 600x600 x3 thick electrode and copper strip of 25x3 complete including providing of material such as charcoal, common salt, GI pipes, thimbles, nuts & bolts, digging of pits, Copper /GI wire/ Strips of required capacity conforming to BIS 8034-1978 latest with upto date ammendments for above motor & other electriacl equipments including all civil works. (for both machineries).Note. The strip size shall be 20x3 upto 18.5 KW . 25x3 for 18.5 to 37 KW to 55 KW and 32x5 beyond 55 KW.

Errection of all equipments including cost of tees,bends tapers & any other fittings required as per site conditions & as per directions of Engineer-in-Charge.

Stage-2nd from Node-2 to Node-134 Supply of horizontal spindle,horizontal/radial split casing and suction (backpull out arrangement) single/ double / multistage centrifugal pumps or combination of pumps in series /parallel of KSB / Mather & Platt/ Jyoti /Kirloskar /BE /Maxflow/ Beaconweir Sabar make conforming to BIS: 1520-1980 (latestwith upto date ammendments) read with BIS: 9137-1978 (latest edition) suitable for lifting water of under mentioned charactristics with impellers of bronze/suitable alloy, priming funnels,casing ring & shaft sleeves of bronze/ suitable alloy, shaft of sutable steel grade with cast iron casing coupled directly through a flexible coupling on a common C.I. / Cast steel base plate (base plate to be from the principle manufacturer of pumping set) to slippering/squirrel cage screen protected drip proof electric induction motor of Kirlokar /NGEF/Crompton / Siemen /Jyoti /BHEL /GEC /ABB conforming to BIS: 325-1978 read read with BIS: 900-1968 (latest with upto date ammendments) It should include the cost of bearings, nuts & bolts,painting etc. and shall be suitable for operation as per data given below.

Total Head 98.68 Mtrs.

Discharge required from each pump. 1.23 lps

No. of pump required 2.00 Set (One act as stand by)

Location of the site of installation of machinery The site is located near Mandapra.

The altitude of installation. 390 MSL.

Type of current. AC three phase supply with freqduency of 75cycle per second.

Rate Voltage 415V + 10%

Type of water and its source Clear water. Shaft level 390 Level of discharge point 457 Static Head

Charactristics of water. a)Ambient Temperature dig.c b)Turbidity NTU c)Hardness260Mg/Ltrs(as CaCO3) d) PH 7.5 e)Total solid Mg /Ltrs f)Other Depth of well assembly

No. of working hours per day 16.00Hours.

Length of Rising main 1150 Rmts.

Dia of Rising main 80 mm G.I. pipe

Limit of pump operation. In the completem Range of (-)75% .

R.P.M. of pumping set. 2900 RPM (or to be specified by the tenderer).

Test run. 8 Hours contineously for 7 days.

Supply of Kirloskar/Kilburn /IVC/Fouress/Gled/BHEL/ Leader make Cast lron double flanged sluice valve of Class PN 1.0 confirming to BIS-14846-2000 (to be provided on delivery side) of equal size to one dia more than the dia of delivery of pump and capable of with standing nominal seat test pressure of 1.6 kg/cm². (the size of valve shall be specified by the tanderer)

Supply of Kirloskar/ Kilburn/IVC/Fouress /Gled/BHEL/Leader make Cast Iron double flanged swing check type reflux valve having bypass arrangement of Class PN 1.0 confirming to BS 5312-1984 (latest edition)to be provided on Rising main) and shall be suitable for withstanding nominal seat pressure of 1.6 kg/cm². (the size of valve shall be specified by the tanderer)

Supply of Kirloskar/ Kilburn/IVC/Fouress /Gled/BHEL/Leader make Cast Iron double flanged swing check type reflux valve having bypass arrangement of Class PN 1.0 confirming to BS 5312-1984 (latest edition)to be provided on Rising main) of 125 mm dia and shall be suitable for withstanding nominal seat pressure of 10.20 kg/cm². (the size of valve shall be specified by the tanderer)

Supply of Kirloskar/ Kilburn/IVC/Fouress /Gled/BHEL/Leader make Cast Iron double flanged sluice valve having bypass arrangement of Class PN 1.0 confirming to BIS 14846-2000 (latest edition)to be provided on suction side of size one dia higher than the suction size of pump capable of withstanding nominal seat pressure of 10.20 kg/cm².

Providing & laying PVC insulated jointless, flat water proof copper cable of Siemens/Finolex/Grandlay/Gloster make conforming to BIS:1554 (Part I) -1988 or latest with up to date ammendments of suitable size for the pump sets offered(one cable carrying all three phases) including all other electrical equipment /accessories such as thimbles ,flexible pipe, solder, nuts & bolts cable glands etc. laid in pipes or trenches under floor. The type,size & make will be subject to approval of HPSEB authorities.In case of non acceptance by HPSEB authorities it shall have to be replaced by the tenderer free of cost. (the size of cable shall be specified by the tanderer)

Onsupply side of 3.5 core copper cabe 10mm2 from HPSEBL to switch and starter

On motor side 3 core flat jointless copper cable of size 6mm2 (from switch starter to motor) pump installed in the bore.

Supply & errection of floor/wall mounted power shunt capacitor conforming to BIS 2834-1986 latest with upto date ammendments of GEC/Siemen/ Havells L&T make to raise the prevailing power factor at site to 0.95 for direct connection to induction motor individually of requirement KVAR according to BHP of motor offered including cable Siemens/Gloster/ICC make from busbar chamber to capacitor & also including Standard/ L&T/Kilburn/Indo asian make ICTP switches conforming to BIS 4064- 4064-1978 or latest with HRC fuses. (range to be specified by the tenderer.)

Supply of standarad make 100 mm dia circular/square dial pressure gauge of suitable range Fiebeg/Bourden/ Precision make with all accessories such as stop cock,copper tubing etc. conforming to BIS 3624-1987 latest with up to date ammendments.

P/L G.I./MSERW pipe considering site requirements and having appropriate size in accordance with the delivery size of pumping set . The pipe shall conform to relevant BIS codes & capable of with standing the feild test pressure equal to 1.5 times the operating pressure including all type of fittings such as bends, tapers/ reducers, flanges, rubber gaskets 3mmthick, nuts & bolts and any other fitting required at site and work shall be to the entire satisfaction of Engineer-in-Charge. The pipe material shall conform to relevant BIS Code and capable of with standing FTP equal to 1.5 times the operating pressure the complete arrangement shall compromise of

Suction pipe XXX mm dia = to be specified by the Tenderer

Delivery pipe XXX mm dia = to be specified by the Tenderer

Common Header= 125mm dia

NOTE:- Actual laying to be done as per final drawings to be approved by the Engineer in charge Providing and lying double loop earthing with coper plate 600x600 x3 thick electrode and copper strip of 25x3 complete including providing of material such as charcoal, common salt, GI pipes, thimbles, nuts & bolts, digging of pits, Copper /GI wire/ Strips of required capacity conforming to BIS 8034-1978 latest with upto date ammendments for above motor & other electriacl equipments including all civil works. (for both machineries).Note. The strip size shall be 20x3 upto 18.5 KW . 25x3 for 18.5 to 37 KW to 55 KW and 32x5 beyond 55 KW.

Errection of all equipments including cost of tees,bends tapers & any other fittings required as per site conditions & as per directions of Engineer-in-Charge.

sadeep kumar

Pawan Kumar Sharma Govt Contractor

SHIV KUMAR

SG Engineers and Consultants

VIVEK KUMAR

A.K. Traders

dinesh kumar lath

ANIL KUMAR