Civil works for extension of Hajrath quarters near Mosque in Housing colony at TNPL Unit I

Amount

EARTH WORK EXCAVATION IN ALL SOILS AND SUB SOILS EXCLUDING ROCK INCLUDING BACKFILLING IN SIDES OF FOUNDATIONS AND BASEMENT, WATERING, CONSOLIDATION, INCLUDING DEWATERING WHEREVER NECESSARY, ETC., AND DISPOSING OFF THE SURPLUS EARTH WITHIN A LEAD OF 40 MTRS AS DIRECTED IN DEPTH FROM GROUND LEVEL TO -2 MTR.

TRANSPORT EXCAVATED EARTH / OTHER DEBRIS FROM INSIDE THE PLANT PREMISES AND FILL IN LOW LYING AREAS, INCLUDING SPREADING, LOADING, UNLOADING (25% VOIDS TO BE DEDUCTED IN LORRY/TRACTOR MEASUREMENTS)

PROVIDING COURSED RUBBLE STONE MASONRY SECOND SORT IN CEMENT MORTAR 1:7 WITH THROUGH BOND STONES 2 MTRS APART IN EACH COURSE, PLACED IN A STAGGERED PATTERN AND COURSE NOT LESS THAN 150MM HIGH WITH FACE STONES PLACED HEADERS AND STRETCHERS ALTERNATIVELY TO BREAK JOINTS BY ATLEAST 75MM INCLUDING INCLUDING POINTING WITH CEMENT MORTAR 1:3 CURING ETC., COMPLETE FOR FOUNDATION BASEMENT UPTO +1.00 MTR LEVEL.

CEMENT CONCRETE 1:4:8 USING 25MM DOWN GAUGE BLUE GRANITE AGGREGATE IN FOUNDATIONS, MUD MAT, FLOORING EXCLUDING SHUTTERING BUT INCLUDING RAMMING, LEVELLING, CURING ETC., COMPLETE.

FORM WORK - WROUGHT AND PUT UP WITH GOOD QUALITY MARINE GRADE PLYWOOD FOR ALL TYPES OF SHUTTERING WORKS LIKE COLUMN, BEAM, SUNSHADE, SHELL WALL, ROOF SLAB, STAIRCASE, ETC., AS "PLASTER FREE FINISH" ABOVE FFL TO +7 MTR LEVEL.

TAKE DELIVERY OF HIGH STRENGTH RIBBED DEFORMED BARS/ MS BARS ISSUED BY TNPL FREE OF COST, CUT, BEND AND TIE UP IN POSITION INCLUDING COST OF SUPPLYING NECESSARY 18 GAUGE BINDING WIRE FOR ALL TYPES OF RCC WORKS AT ALL LEVELS.

CEMENT CONCRETE M20 USING 20 MM SIZE BLUE GRANITE AGGREGATE FOR ALL CEMENT CONCRETE ITEMS SUCH AS COLUMN, BEAM, SLAB, LINTEL, SUNSHADE, STAIRCASE ETC., EXCLUDING SHUTTERING BUT INCLUDING LEVELLING, CURING, ETC., COMPLETE FROM 0.00 MTR TO +7.00 MTR LEVEL

SUPPLY AND LAYING OF FLY ASH BRICKS IN SUPER STRUCTURE IN CM 1:6 INCLUDING SCAFFOLDING, CURING ETC., COMPLETE ABOVE +0.00 MTR TO +3.00 MTR LEVEL

BRICK MASONRY WITH APPROVED QUALITY CHAMBER BURNT BRICKS / FLY ASH BRICKS IN HALF BRICK THICK WALL IN CM 1:4, EXCLUDING PLASTERING, INCLUDING SCAFFOLDING, CURING ETC., COMPLETE AT ALL LEVELS.

PREPARE SURFACES OF WALLS AND PLASTER INTERIOR, EXTERIOR AND TOP FACES WITH CEMENT MORTAR, 12MM THICK IN CM 1:4 INCLUDING NECESSARY SCAFFOLDING AND CURING ETC., COMPLETE FROM FFL TO +5.00 MTR LEVEL.

SUPPLY OF "JOHNSON" OR "SOMANY" OR "KHAJARIA" MAKE VITRIFIED FLOOR TILES OF SIZE 2' X 2' AND APPROVED SHADE, FIXING IN POSITION AND SKIRTING WITH BED MORTAR 1:3 20MM THICK AND POINTING THE JOINTS WITH TILE MATE COMPOUND ETC., COMPLETE AT ALL LEVELS.

SUPPLYING AND FIXING OF CERAMIC FLOOR TILES ANTI SKID OF SIZE 300 X 300MM X 8MM THICK OF APPROVED MAKE AND SHADE WITH BED MORTAR IN CM 1:3, 20MM THICK TO DESIRED SLOPE AND POINTING THE JOINTS WITH TILE MAT COMPOUND, CURING, ETC., COMPLETE AT ALL LEVELS FOR TOILETS.

SUPPLYING OF WALL TILES OF APPROVED MAKE, SIZE AND DESIGN / SHADE AND FIXING THEM IN POSITION FOR WALLS WITH BED MORTAR IN CM 1:3, 20MM THICK, PREPARING THE SURFACES AND POINTING THE JOINTS WITH TILE MAT COMPOUND AS DIRECTED BY ENGINEER INCHARGE.

SUPPLYING AND FIXING IN POSITION OF MS GATE / GRILL USING SQUARE (OR) RECTANGULAR BAR INCLUDING NECESSARY WELDING AND APPROVED DESIGN INSTRUCTED BY ENGINEER INCHARGE INCLUDING APPLYING ONE SHOP COAT OF RED OXIDE PRIMER ETC., COMPLETE

PROVIDING AND FIXING OF UPVC SLIDING WINDOW OF SIZE 1.50 X 1.20. THE FRAME MADE OUT OF UPVC PROFILE SECTION OF SIZE 62MM X 60MM X 2.2MM THICK WITH SHUTTER FRAME OF STANDARD SECTION 2.2MM THICK. THE WINDOW SHUTTER COVERED WITH 5MM THICK PLAIN GLASS INCLUDING FIXING OF ALUMINIUM JOINERY FITTINGS, LABOUR CHARGES, SCREWS, RUBBER BEADING ETC., COMPLETE

SUPPLY OF STANDARD SOLID FLUSH WOODEN DOOR (SINGLE LEAF) OF SHUTTER 30MM THICK AND SIZE 900 / 1000 X 2100 MM. THE DOOR SHALL BE LAMINATED WITH 1 MM THICK MERINO / ARCHID LAMINATED SHEETS ON BOTH SIDES WITH APPROVED SHADE AND FINISH WITH VISION PANEL WHEREVER NECESSARY. THE RATE INCLUDES COST OF WOODEN FRAME FOR DOOR SHUTTERS, HARDWARES OF SS 304 HANDLES, HINGES, BRASS LOCKS AND LATCHES, DOOR STOPPER, AUTOMATIC DOOR CLOSER ETC., COMPLETE.

FOR SMALL WORKS WHICH IS UNQUANTIFIED EXACTLY, SUPPLY OF ELECTRICAL CONCRETE BREAKER (BOUSH MAKE -MODEL NO.11E) WITH LABOUR FOR DISMANTLING OF COCNRETE, BRICK WORK, CR MASONRY, ETC., THE WORK INCLUDES DISPOSAL OF DISMANTLED DEBRIS WITHIN THE LEAD OF 2KM APART AS DIRECTED.

SUPPLY AND FIXING OF EWC WHITE COLOUR WITH P OR S TRAP OF PARRYWARE OR EQUIVALENT MAKE AND FIXING OF PLASTIC LOW LEVEL TANK WITH INTERNAL FITTINGS OF SLIMLINE MAKE. ALSO FIXING OF CP ANGLE VALVE OF APPROVED ISI MAKE WITH CP INLET CONNECTION TO LOW LEVEL TANK. THE PLASTIC SEAT COVER WHITE COLOUR SHALL BE FIXED OF COMMANDER OR EQUIVALENT APPROVED MAKE. RATE INCLUDES COST OF ALL MATERIALS, NECESSARY CIVIL WORKS LIKE MAKING OPENING IN THE EXISTING WALL, TAPPING FROM THE EXISTING WATER LINE FOR INLET TO THE TANK, LABOUR CHARGES ETC., COMPLETE IN GROUND AND FIRST FLOOR.

SUPPLYING AND FIXING WHILE GLAZED EARTHEN WARE WASH BASIN OF SIZE 550 X 400MM OF APPROVED MANUFACTURE WITH CENTRAL 15MM CP PILLAR TAP OF APPROVED MAKE WITH CI BRACKETS, WOODEN PLUGS 15MM PVC CONNECTION, 15MM CP ANGLE COCK, 40MM CP WASTE COUPLING WITH CHAIN AND PLUG AND PVC DRAIN PIPE WITH NECESSARY COUPLINGS ETC. COMPLETE.

SUPPLY OF 25MM DIA THREADED U.PVC PIPE 40 SH OF FINOLEX MAKE AND LAYING IN POSITION INCLUDING NECESSARY SPECIALS LIKE BEND, ELBOW, CLAMPING, COUPLING INCLUDING NECESSARY EARTH WORK IN CASE OF UNDER GROUND LINE AND CONCEALING WORKS WHEREVER REQUIRED ETC., COMPLETE.

SUPPLY OF 20MM DIA THREADED U.PVC PIPE 40 SH OF FINOLEX MAKE AND LAYING IN POSITION INCLUDING NECESSARY SPECIALS LIKE BEND, ELBOW, CLAMPING, COUPLING INCLUDING NECESSARY EARTH WORK IN CASE OF UNDER GROUND LINE AND CONCEALING WORKS WHEREVER REQUIRED ETC., COMPLETE.

SUPPLY AND FIXING 75 MM DIA PVC PIPE OF APPROVED IS MAKE 4 KG/ SQ.CM WITH NECESSARY GI CLAMP AT 1 MTR INTERVAL WITH NECESSARY SPARES LIKE COUPLING, BEND, ELBOW, ETC., TO SUIT THE SITE CONDITIONS AS DIRECTED.

SUPPLY AND LAYING OF 110MM DIA FINOLEX MAKE PVC PIPES WITH 'IS' APPROVED MAKE INCLUDING NECESSARY SPECIALS LIKE BEND, ELBOW, CLAMPING, COUPLING OF STANDARD MAKE, ETC., COMPLETE AT ALL LEVELS. (PRESSURE CAPACITY : 4 KG/ SQ.CM)

THROUGHLY CLEANING THE EXISTING PAINTED SURFACES OF WALLS USING BUFFERING MACHINE. SCRAP THE EXISTING PAINTED SURFACE AND DISPOSE THE SAME AS DIRECTED. RATE INCLUDES LABOUR CHARGES AND ALL OTHER INCIDENTIAL CHARGES ETC., COMPLETE AT ALL LEVELS.

THROUGHLY PREPARE THE SURFACES AND APPLY ONE COAT OF WALL PRIMER OF APPROVED MAKE OVER WALL PUTTY SURFACES AND APPLY TWO COATS OF ACRYLIC EMULSION IST QUALITY OF APPROVED COLOUR AND MAKE INCLUDING MATERIAL COST AND ALL CONSUMABLES LABOUR CHARGES, SCAFFOLDING ETC. COMPLETE AT ALL LEVELS.

SUPPLY AND APPLICATION OF ONE COAT OF WEATHER PROOF EXTERIOR PRIMER AND TWO COATS OF EXTERIOR EMULSION OF APPROVED COLOUR SHADE INCLUDING SCAFFOLDING, LABOUR ETC., COMPLETE AT ALL LEVELS. (ASIAN OR BERGER).

PREPARING THE SURFACES AND APPLYING ONE COAT OF ENAMEL PAINT INCLUDING COST OF MATERIAL, LABOUR, CONSUMABLES LIKE BRUSH, ETC. COMPLETE

ERECTION OF SCAFFOLDING WHEREVER REQUIRED AND CLEANING THE SURFACES AND APPLICATION OF ONE COAT OF WHITE WASH USING JANATHACEM OR EQUIVALENT QUALITY OVER THE NEW / EXISTING SURFACES INCLUDING COST OF ALL MATERIALS AND OTHER LABOUR, INCIDENTAL CHARGES ETC. COMPLETE AT ALL LEVELS.

SUPPLY AND FIXING OF PVC STANDARD DOOR AS PER SKETCH. 4 ( X ) MODEL OF APPROVED COLOUR AND MAKE.

SUPPLYING AND FIXING OF ALUMINIUM LOUVERED VENTILATOR OF SIZE 750 X 900 MM WITH ADJUSTABLE LOUVERS USING 5MM THICK FROSTED GLASS RATE INCLUDES ALL CONSUMABLES, LABOUR CHARGES ETC., COMPLETE AT ALL LEVELS.

Bidder Name

Amount in Words

KUMARAN KUDIL CONSTRUCTIONS

R.GANESAN

K PALANISAMY

R.GANESAN

K PALANISAMY