PROVN OF OVERHEAD SHED OF SIZE 30X20 SQF WITH CGI AND IRON POLES ALONGWITH PCC FLOOING FOR VISITORS AND PATIENTS VEH PARKING AREA AND PATHWAY FOR BLDG NO T-18 (CHIT WOOD LINE) AT RECORS THE GRRC UNDER AGE (I) LANSDOWNE

Amount

Excavation over area not exceeding 1.5metre depth and getting out in Soft/disintigrated rock complete all as specified and directed

Excavating in post holes (or similar holes) in soft/disintigrated rock, each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/disintegrated rock complete all as specified and directed

Removing excavated material (soils/rock) upto a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed

Returning filling in with approved excavated soil including spreading levelling, watering and well ramming in layers not exceeding 25cm thick, complete all as specified and directed

M&L for Hardcore of broken stone or boulders of gauge n exc 63mm, deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface complete all as specified and directed

M&L for Cement concrete 1:4:8 type D2 using 40mm graded agg 75 mm thick as in sub base of floor etc complete all as specified and directed

M&L for 100 mm thick PCC Type B-2,1:2:4 (40 mm graded aggregate) in sub-floors, sub-bases, foors and pavings etc complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (40mm graded agg) is in foundation filling and mass concrete complete all as specified and directed

M&L for rolled mild steel work in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed

S & F for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.11611979 grade St.-240 complete all as specified and directed

M&L for rolled mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed

S&F for Pre-painted galvalume aluminium zinc coating AZ-150 GI based corrugated steel sheet 0.50mm thick of any colour (ISI Marked) having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

Material & labour for preparation of new or old previously untreated steel surface of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for Walling of random rubble, stone masonary, uncoursed well bonded, bedded and solidly hearted, built in cement mortar (1:6) complete all as specified and directed

M&L for PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in coping and the like including weathering slightly rounded/chamferred angle with and including necessary use and waste of form work for fair faces of concrete complete all as specified and directed

M&L for Pre cast cement concrete (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) as in bond stones in lieu of stone bond stones, set in cement mortar 1:6, complete all as specified and directed.

Extra over stone walling for hammer dressing with maximum depression on face from straight edge held against the dressed surfcae not exceeding 20mm to face stone (lime or sand stone) and dressing of face beds and joints, as specified of random rubble walling, uncoursed or brought upto course complete all as specified and directed

M&L for Raised pointing to random rubble masonary uncoursed or brought upto course in cement mortar (1:4) complete all as specified and directed

S&F for 110mm PVC (SWR) pipes single socketed, in any length as in weep holes with rubber ring joints, laid in trenches or in floors, complete all as specified and directed

S&F for Welded steel wire fabric 3mm dia, complete to wood or steel members all as specified and directed.

M&L for brick work with sub class 'B' brick straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed

M&L for Rendering 15mm thick in cement mortar C:M 1:4 in cement on wall surface and finished fair and even complete all as specified and directed

M&L for preparation of new plastered surfaces of wall incl corinces, plasters etc and applying two coats of cement base paint over a coat of primer on walls complete all as directed by Engineer-in-Charge.

M&L for Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed

M&L for Machine pressed precast concrete interlocking paver block any hape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment finished with coloured rubbel finish on top finished complete all as specified and directed

M&L for 30mm thick Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed

M&L for PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in both sides of path, kerb or mud stops, rounded or chamferred complete all as specified and directed.

M/s Varun Kumar Contractor

M/s Candid Mask Networks Pvt Ltd