REPAIR AND MAINT OF INTERNAL ELECTRIFICATION INCLD FITTING AND FIXTURES AT ZONE-II BARAMULLA UNDER GE 969 EWS.

Amount

Taking down carefully copper/aluminum point wiring (light. Fan, socket or power) complete, incl fittings such as switches, ceiling roses, pendants, regulators, sockets etc, removing materials to store for keeping in safe custody for reuse at site and making good disturbed surfaces of walls, floors etc, Complete all as specified and directed by Engineer-In-Charge.

M&L for point wiring in PVC casing caping with 1.5 Sqmm size multi stranded FRLS copper conductor cable 1.5 Sqm including clamps, screws guttier/plug etc PVC unsheathed cable into and including wooden board with bakelite sheet and PVC insulated FRLS cable of size 1.5 Sqmm as earth continuity conductor for One light point/fan point/Ex fan point controlled by one 5 Amps switch one way, complete all as specified and directed by Engineer-In-Charge.

All as per ser item No 2 above but one 3 pin 5 Amp switch socket outlet on independent board.

All as per ser item No 2 above but one 3 pin 5 Amp switch socket outlet on same board with accessories.

M&L for point wiring in PVC casing caping with 2.5 Sqmm size multi stranded FRLS copper conductor cable including clamps, screws guttier/plug etc PVC unsheathed cable into and including wooden board with bakelite sheet and PVC insulated fire retardant cable of size 2.5 Sqmm as earth continuity conductor, complete all as specified and directed by Engineer-In-Charge.

S&F switch piano Flush type, single pole, one way 6 amp 240 volts, complete all as specified and directed by Engineer-In-Charge.

S&F switch piano Flush type, single pole16 amp 240 volts, complete all as specified and directed by Engineer-In-Charge.

S&F Socket outlet 2 in 1, 3 pin, 5 Amps, flush type, complete all as specified and directed by Engineer-In-Charge.

S&F Socket outlet 2 in 1, 3 pin, 5 and 15 Amps, flush type, complete all as specified and directed by Engineer-In-Charge.

S&F Switch socket combination 2 in1, 3 pin,5 Amps flush type, universsal complete all as specified and directed by Engineer-In-Charge.

S&F Switch socket combination 2 in1, 3 pin,5 and 15Amp flush type, universsal complete all as specified and directed by Engineer-In-Charge.

S&F switch modular single pole one way 6 amp 240 volts,1 Module, complete all as specified and directed by Engineer-In-Charge.

S&F switch modular single pole one way 16 amp 240 volts,1 Module, complete all as specified and directed by Engineer-In-Charge.

S&F Modular socket 6A - 2/3 pin combined 2 module, complete all as specified and directed by Engineer-In-Charge.

S&F Modular socket 6A /16A- 2/3 pin combined 2 module, complete all as specified and directed by Engineer-In-Charge.

S&F in repairs Bell Push 6 Amp , Flush type complete all as specified and directed by Engineer-In-Charge.

S&F in repairs modular Bell Push 6 Amp , complete all as specified and directed by Engineer-In-Charge.

S&F in repairs Bell electric, Ding Dong AC 230 Volts, single pole, complete all as specified and directed by Engineer-In-Charge.

Supply and fixing ceiling rose 3 terminal / PVC/ Polycarbonate, isolated body, complete all as specified and directed by Engineer-In-Charge.

S&F in repair LED Lamp 15 W complete all as specified and directed by Engineer-In-Charge. Make : Havells/Philips / Bajaj/Crompton

S&F in repair white cover plate with frame, 4 Moudule for point complete all as specified and directed by Engineer-In-Charge.

S&F in repair white cover plate with frame, 6 Moudule for point complete all as specified and directed by Engineer-In-Charge.

S&F in repair white cover plate with frame, 8 Moudule for point complete all as specified and directed by Engineer-In-Charge.

S&F in repairs Lamp Holder, PVC/ Polycarbonate type with back plate suitable for batten fitting complete all as specified and directed by Engineer-In-Charge.

S&F in repairs stepped type electronic fan regulator for ceiling fan 1200/1400mm size,230 volts,6 Amps, complete all as specified and directed by Engineer-In-Charge.

S&F in repairs modular fan regulator step type, 120w-2 module.complete all as specified and directed by Engineer-In-Charge.

S & F decorative ultra slim energy efficient 1x22W, 230 Volt aluminium LED lighting fixture with high lumen output, environmental friendly, complete all as specified and directed. Make : Havells Cat part No LHEXBTP7IN1S022 or equivalent in Crompton/Philips

S&F in repir LED 7.5W down light Decorative, surface mounting, dome shaped pendant in green & black finishes complete all as specified and as directed.

S&F in repir LED 10W surface Bed/track light complete all as specified and directed.

S&F in repairs 40 Watt Warm White LED ultra modern recess mounted luminaire (LxWxH) 595x595x70, environmental friendly, new generation,aesthetically designed, with high brightness complete all as specified and directed.

S & F in repairs ultra modern, energy saving, surface mounted, decorative oval bulk head edge-lit LED luminaire comprising of high brightness LEDs 13/15W LED complete all as specified and as directed.

S & F in repairs 18 W LED panel round/square type, slim, compact, auminum die cast edge lit panel. recess/ceiling mounted square/round fixture with opal diffuser and separate electronic driver including connecting cable of suitable size complete all as specified and as directed by Engr-in-Charge.

S & F in repairs LED Mirror Light "Eco Smart Linea" 18 Watts made of extruded engineering plastics suitable for surface mounting on a ceiling or wall complete all as specified and as directed.

S & F in repairs LED bulb thread type of capacity 5/10 Watt,(Make:- HAVELLS/Bajaj/ CG)

S & F in repairs flexible coloured led strips of 10 mtr long with uniform light distribution and long lasting adhesive for perfect cove lighting including connector and Constant Voltage 12 V 3 A driver.

S & F in repairs exhaust fan/brisk air fan of size 200 mm sweep, non matallic complete all as specified and as specified and as directed. Make : Havells code No. Ventil Air - DX White/CG/Bajaj

S&F in repairs Double door metallic sheet metal enclosure for DB when MCBs to be used SPN 4 ways, 240 V with 200Amps rated bus bar complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires all as directed.

S&F in repairs Double door metallic sheet metal enclosure for DB when MCBs to be used SPN 8 ways, 240 V with 200Amps rated bus bar complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires all as directed.

S&F in repairs Double door metallic sheet metal enclosure for DB when MCBs to be used SPN 12 ways, 240 V with 200Amps rated bus bar complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires all as directed.

S&F in repairs Double door metallic sheet metal enclosure for DB when MCBs to be used TPN 4 ways, 415 V with 200Amps rated bus bar complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires all as directed.

S&F in repairs TPN 4 way Double door metallic sheet metal enclosure with TP MCCB 160 Amp as incommer and 24 MCB 6-32 Amps as outgoing complete, 415 V with 240Amps rated bus bar fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires all as directed.

S & F in repairs MCB, TPN 63 Amps 415 Volts C curve, complete all as specified and as directed.

S & F in repairs MCB, SPN 63 Amps 240 Volts C curve, complete all as specified and as directed.

S & F in repairs MCB, SPN 32 Amps 240 Volts C curve, complete all as specified and as directed.

S & F MCB SP 6 to 32 Amps, 240 Volts, C Curve complete all as specified and directed.

M & L for sub main wiring with two run single core 6 Sqmm FRLS copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia PVC conduit/casing caping, medium grade ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 6 Sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion etc complete all as directed. Note: Two runs of 6 sqmm and one run of 6 sqmm cable and one run of casing capping shall be measured as one RM

S&F 1100 V grade heavy duty cable with pvc insulated aluminium conductor served with an inner sheathing of pvc tape and overall pvc sheathed in service connection suspended by insulating hangers not more than 1mtr apart including 4mm suspension wire one twin core cable flat or circular of size 6 sqmm all as specified and directed

S&F 1100 V grade heavy duty cable with pvc insulated aluminium conductor served with an inner sheathing of pvc tape and overall pvc sheathed in service connection suspended by insulating hangers not more than 1mtr apart including 4mm suspension wire one twin core cable flat or circular of size 10 sqmm all as specified and directed

S&F 1100 V grade heavy duty cable with pvc insulated aluminium conductor served with an inner sheathing of pvc tape and overall pvc sheathed in service connection suspended by insulating hangers not more than 1mtr apart including 4mm suspension wire one twin core cable flat or circular of size 16 sqmm all as specified and directed

Supply and fixing, install and testing ISI marked, metalic body, energy efficient, water heater storage type, copper tank, electgrically operated, single phase, 50 Hz (5 star rating), complete of 25 Ltr capacity with and including supply and fixing, wire armoured 450mm long, 15 mm dia brass coupler etc, flexible pipe suitable to withstand upto 100 degree celcius for hot and cold water, Anchor fastner - 04 Nos of suitable size , 3 core PVC insulated, FRLS multistranded copper conductor cable and plug top 15 Amps capacity complete in all respect and all as specified and directed by Engr-in-Charge. Note:- Old geyser deposited to MES store yard.

Repair and re-fixing, re-assembling the existing cealing fan in same original position along with cable after rectification of defects such as apply the one coat varinsh for windings, painting fan blades, changing fan bearning, rewinding of fan, write MES no. on fan blades including nut, bolts and washers complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in repairs heating element including rubber gasket & washer etc of capacity 1.5 KW suitable for existing make and shape (triangular/round) complete all as specified and directed.

Supply and fixing in repairs heating element including rubber gasket & washer etc of capacity 2 KW suitable for existing make and shape (triangular/round) complete all as specified and directed.

S&F in repairs thermostat including rubber / PVC gasket to be set to a temperature not higher than the range of 70 degree Centigrade suitable for existing geysers of capacity 25 / 35 / 50 ltrs including taking down existing unserviceable thermostat complete all as specified and as directed.

S&F in repairs PVC connecting pipe 18"/24" long with brass adopters for cold/hot water and connecting up with complete for 25 /35 /50 ltrs capacity Geysers including taking down existing unserviceable PVC connecting pipe complete all as specified and directed.

S&F in repairs indication lamp for 25 / 35 / 50 ltrs capacity Geysers including taking down existing unserviceable indication lamp complete all as specified and as directed.

Servicing of geysers of any capacity by opening of entire geyser and cleaning all the sludges, blockages, dust, providing check nuts etc all as specified and as directed.

S&F in replacement internal assembly suitable for 25 / 50 ltrs capacity Geysers including taking down existing unserviceable assembly complete all as specified and as directed.

Supply, and fixing in repairs PVC insulated, PVC sheathed cable electric service cables (For Gyser) with stranded copper conductor of size 2.5 sq mm ,3 core, 1100 Volts grade.

S&F in repairs bottom covers (set of two halves) duly painted made out of Aluminium / MS sheet of 18 SWG suitable for 25 / 35 / 50 ltrs capacity Geysers. complete all as specified and as directed.

S&F in repairs Plug top 15A 24V complete all as specified and directed.

S&F in repairs Plug top 5A 24V complete all as specified and directed.

Repair/ Maintenance of voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity up to 5 KVA including winding in super enamel copper wire.

Supply and charging of refrigerant gas R-22/R-410 upto sufficient pressure for compressor of 2 ton capacity window type /split type ACs including connected works like pressure testing with nitrogen before filling of refrigeratn gas including cutting of copper tubing and brazing and refixing in position complete.

M&L for taking down unserviceable burnt compressor, supply and fix scroll type new compressor of existing unit make suitable for 1.5/ 2 TR air cooled split type unit and rectify the control wiring defects if any, connecting back all controls and refrigerant piping after necessary modification as required for system, pressure testing with nitrogen gas under constant pressure of 300 PSI Kg/sq.cm for minimum 08 hours vacuumising, gas charging, commissioning and checking the performance of the system Complete all as specified and directed by Engr-in-Charge.

M & L for servicing of AC, blower of any capacity by opening of entire split type AC and cleaning all the parts and removing dust, etc all as specified and as directed.

Supply and replacing old and defective reverse valve unit of same model amd make suitable for 1.5/2 TR capacity split type units.

Supply and replacing old and defective PCB card for indoor unit of same model amd make suitable for 1.5/2 TR capacity split type units.

M&L in repairs for earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth wire of 4 mm dia (up to 7.5 m in length from earth plate ) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no.3 of SSR part I including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1, 40 mm thick cover with MS rod 8mm dia at 150mm c/c in both ways as reinforcement, watering funnel, 20 mm dia light grade for protection of earth electrode, 20 mm dia GI pipe light grade for watering complete all as specified and as directed by Engineer in charge and tested on completion. Note : The rate is inclusive of necessary earth work, RFR and removal etc

M/S NEW FAROOQ TRADERS

Javeed And Co

M/S KULBIR SINGH SODHI AND CO

M/S NISAR AND CO

M/S IQ ENTERPRISES

M/S ARTECH BUILDERS AND SUPPLIERS

MS DUTTA BUILDERS