Erection & Maintenance of HT, LT lines & TC etc. and supply, laying, testing & commissioning of 11 KV underground XLPE cable (cable to be supply by DGVCL) with cable end termination and straight joint kit (to be supplied by the contractor/agency) and HDPE green pipe for HT Underground cable work for work under all scheme within jurisdiction of Atul sdn, East Sdn & Valsad Ind Sdn under Valsad City Division.

Annexure-A Schedule B

Erection & Maintenance of HT,LT lines & TC etc. and supply, laying, testing & commissioning of 11 KV underground XLPE cable (cable to be supply by DGVCL) with cable end

termination and straight joint kit (to be supplied by the contracor/agency) and HDPE green pipe for HT Underground cable work for work under all scheme within jurisdiction of

Atul sdn, East Sdn & Valsad Ind Sdn under Valsad City Division.

Sr. No. Item Code Item Unit Rate for FY 2024-25

CAPITAL WORK LABOUR RATES FOR FY 2024-25

HT TAPPING FROM THE EXISTING POLE INCLUDING FIXING OF CROSS ARMS , CLAMPS ANTI-

CLIMBING DEVICES , DANGER BOARD, INSULATORS ETC. COMPLETE AND PAINTING OF

1 9926000001 FABRICATED MATERIALS AND NUMBERING COMPLETE WITH COST OF PAINTS AS PER STANDARD No.

SPECIFICATION BUT EXCLUDING ERECTION OF GUY SET AND EARTHING.

ERECTION OF PSC POLES OF 8 *200 KG INCLUDING EXCAVATION OF PIT AND REFILLING OF

EARTH, FIX ING OFCROSS ARMS , TOP FITTING CLAMPS ANTI-CLIMBING DEVICES , INSULATORS

ETC. COMPLETE AND PAINTING OF FABRICATED MATERIALS USED ON THE POLES AND

2 9926000002 NUMBERING WITH COST OF PAINT AS PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION No.

OF GUY SET AND EARTHING.

3 9926000003 ERECTION OF STEEL POLES OF 9 TO 11 METERS INCLUDING EXCAVATION OF PIT AND REFILLING No.

OF EARTH, FIXING OFCROSS ARMS , TOP FITTING CLAMPS ANTI- CLIMBING DEVICES , DANGER

BOARD, INSULATORS ETC. COMPLETE AND PAINTING OF STEEL POLE, FABRICATED MATERIALS

USED ON THE POLEAND NUMBERING WITH COST OF PAINT AS PER STANDARD SPECIFICATION

BUT EXCLUDING ERECTION OF GUY SET AND EARTHING.

ERECTION OF STEEL POLE OF 13 METERS FOR RAILWAY CROSSING ON BG/MG/NG LINE FOR

0.400/ 11/22KV OVERHEAD LINES l.E INCLUDING EXCAVATION OF PIT & REFILLING OF EARTH, FIX

ING CROSS ARMS , TOP FITTING CLAMPS .ANTI-CLIMBING DEVICES DANGER BOARD, INSULATORS

4 9926000004 ETC. COMPLETE AND PAINTING OF STEEL POLES, FABRICATED MATERIALS USED ON THE POLES No.

AND NUMBERING WITH COSTOF PAINT AS PER STANDARD SPECIFICATION BUT EXCLUDING

ERECTION OF GUY SETS AND EARTHING.

ERECTION OF DOUBLE POLE STRUCTURE OF 8 METERS 200 KG PSC POLES INCLUDING

EXCAVATION OF PITS & REFILLING OF EARTHING , FIXING OF CHANNELS , SUPPORTING ANGLES

.CLAMPS , ANTI-CLIMBING DEVICES DANGER

5 9926000005 BOARDS .INSULATORS ETC.COMPLETE AND PAINTING OF FABRICATED MATERIALS USED ON THE No.

POLES AND NUMBERING WITH COST OF PAINT AS PER STANDARD SPECIFICATION BUT

EXCLUDING ERECTION OF GUY SETS AND EARTHING.(WITHOUT AB SWITCH)

ERECTION OF DOUBLE POLE STRUCTURE OF 9 TO 11 METERS.STEEL POLE INCLUDING

EXCAVATION OF PITS & REFILLING OFEARTH, FIX ING OF CHANNELS , SUPPORTING ANGLES

CLAMPS .ANTI-CLIMBING DEVICES DANGER BOARDS , INSULATORS ETC.COMPLETE & PAINTING

6 9926000006 OF POLES.FABRICATED MATERIALSUSED ON THE POLES AND NUMBERING WITH COST OF No.

PAINTSAS PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY SET AND

EARTHING.(WITHOUT AB SWITCH)

ERECTION OF DOUBLE POLE STRUCTURE WITH MOUNTING OF AB SWITCH , HG FUSES OF 8 MTRS

200 KG PSC POLES INCLUDING EXCAVATION OF PITS AND REFILLING OF EARTH.FIXING OF

CHANNELS SUPPORTING ANGLES , CLAMPS , ANTI- CLIMBING DEVICES , DANGER BOARDS

INSULATORS ,DOFUSES ETC. COMPLETE AND PAINTING OF FABRICATED MATERIALS USED ON

THE POLES AND NUMBERING WITH COSTOF PAINT AS PER STANDARD SPECIFICATION BUT

EXCLUDINGOF ERECTION OF GUY SET AND EARTHING.(WITH AB SWITCH)

8 9926000008 ERECTION OF DOUBLE POLE STRUCTURE WITH MOUNTING OF AB SWITCH .HG FUSES, No.

9 TO 11 METERS STEEL POLES INCLUDING EXCAVATION OF PITS AND REFILLING OF EARTH, FIX

ING OFCHANNEL , SUPPORTING ANGLES , CLAMPS , ANTI-

CLIMBING DEVICES , DANGER BOARDS , INSULATORS , ETC. COMPLETE AND PAINTING OF POLES

FABRICATED MATERIALS USED ON THE POLES AND NUMBERING WITH COST OF PAINT AS PER

STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY SET AND EARTHING.(WITH AB

ERECTION OF DOUBLE POLE STRUCTURES WITH MOUNTING OFAB SWITCH, HG FUSES,

TRANSFORMERS , LIGHTENING ARRESTORS , DISTRIBUTION BOX . OF 8 METER,200KG PSC POLE

METERS POLES INCLUDING EXCAVATION OF PITS AND REFILLING OF EARTH, CARTING OF

TRANSFORMERS FROMSTORES TO SITE , FIX ING OF CHANNELS , SUPPORTING ANGLES

.BRACINGS CROSS ARMS CLAMPS , ANTICLIMBING DEVICES DANGER BOARDS , CONDUCTOR AND

CABLE WIRING ETC.COMPLETE AND PAINTING OF FABRICATED MATERIALS USEDON THE POLES

9 9926000009 AND NUMBERING WITH COST OF PAINT AS PER STANDARD SPECIFICATION BUT No.

EXCLUDING ERECTION OF GUY SETS AND EARTHING.

ERECTION OF DOUBLE POLE STRUCTURE WITH MOUNTING OF AB SWITCH .HG FUSES

TRANSFORMERS , LIGHTENING ARRESTORS , DISTRIBUTION BOX 9 TO 11 METERS STEEL POLES

INCLUDING EXCAVATION OF PITS & REFILLING OF EARTH CARTING OF TRANSFORMERS FROM

STORE TO SITE , FIXINGOF CHANNELS SUPPORTING ANGLES , BRACING , CROSS ARMS .CLAMPS

10 9926000010 ANTICLIMBING DEVICES , DANGER No.

BOARDS .CONDUCTOR AND CABLE WIRING ETC. COMPLETE AND PAINTING OF POLES

FABRICATED MATERIALS USED ON THE POLES AND NUMBERING AS PER STANDARD

SPECIFICATION BUT EXCLUDING ERECTIONS OF GUY SETS AND EARTHING.

11 9926000011 ERECTION OF GUY SET INCLUDING EXCAVATION OF PITS & REFILLING OF EARTH AS PER No.

STANDARD SPECIFICATION WITH STAY CLAMPS , STAY WIRE , ANCHOR ROD, TURN BUCKLE,

EYEBOLT, GUY INSULATOR, CEMENT CONCRETE BLOCK ETC. BUT

EXCLUDING CONCRETING.

12 9926000012 CONCRETING OF POLES, GUYS , ETC. INCLUDING COST OF CEMENT SAND METAL (1:2:4) AND CMT

WATER ETC. AS PER STANDARD SPECIFICATION.(cement Should be

grade) used for Concreting.

13 9926000013 ERECTION OF COIL TYPE EARTHING INCLUDING COST OF COAL.SALT ETC. BUT WITHOUT COST No.

OF GI WIRE AS PER STANDARD SPECIFICATION(20kg solt+20kg coal)

ERECTION OF GI PIPE/Cl PLATE TYPE EARTHING INCLUDINGCOST OF COAL SALT ETC. BUT

14 9926000014 WITHOUT COST OF PIPE/GIPLATE GI WIRE AS PER STANDARD No.

SPECIFICATION.(20kg solt+20kg coal)

ERECTION OF STREET LIGHT FIXTURE COMPLETE WITH CLAMPS , BRASS NIPPLE, BRASS HOLDER

9926000015 TECK WOOD BUSH.REFLECTORS FUSE, WIRING ETC. AS PER STANDARD SPECIFICATION BUT No.

EXCLUDING COST OF MATERIALS.

16 9926000016 STRINGING OF(30mm2)ACSR/34MM@ ,55MM2 AAA CONDUCTOR for ALL TYPE OF CONDUCTOR ONE COND

(EXCEPT DOG CONDUCTOR) FOR 11/22KV & LT LINES INCLUDING FIX ING OF INSULATORS , PER KM

BINDING JUMPERING ETC.

17 9926000017 STRINGING OF GI WIRE 8 SWG INCLUDING BINDING JUMPERING ETC. DO

PROVIDING SINGLE PHASE SERVICE CONNECTION WITH PVC 2.5/4MM2 TWIN CORE CABLE FROM

TERMINAL POLE TO METERING POINT INCLUDING FIXING OF METER WITH METER EARTHING

18 9926000018 COMPLETE WORK AS PER STANDARD SPECIFICATION BUT EXCLUDING COST OF MATERIALS. No.

19 9926000019 PROVIDING THREE PHASE 4 WIRE SERVICE CONNECTION WITH PVC 4MM2/ 10MM2 FOUR CORE No.

CABLE FROM TERMINAL POLE TO METERING POINT INCLUDING FIX ING OF METER WITH METER

EARTHING COMPLETE WORK AS PER STANDARD SPECIFICATION BUT EXCLUDING COST OF

ADDITIONAL COST FOR EXCAVATION OF PIT IN HARD ROCK AREA FOR ERECTION OF POLE/ GUY

ETC. AS PER STANDARD SPECIFICATION OVER & ABOVE NORMAL COST COVERED AGAINST

20 9926000020 EXCAVATION OF PIT UNDER NORMAL SOIL FOR ERECTION OF POLE.GUY , DOUBLE POLE No.

STRUCTURE EARTHING WITH THE APPROVAL OF SUPDT.ENGINEER.

21 9926000021 PROVIDING GUARDING TO HT LINE ON ROAD/ RAIL CROSSING. MTR

22 9926000022 PROVIDING GUARDING OF LT LINES ON ROAD/RAIL CROSSING. MTR

23 9926000023 LT LINE TAPPING- SINGLE PHASE No.

24 9926000024 LT LINE TAPPING- THREE PHASE No.

25 9926000025 Stringing/LAYING OF OVER HEAD LT CABLE FOR ROAD CROSSING .HT LINE CROSSING AND No.

TELEPHONE LINE CROSSING ETC.(PER SPAN)

ERECTION OF SINGLE POLE STRUCTURES WITH , HG FUSES,TRANSFORMERS , LIGHTENING

ARRESTOR , DISTRIBUTION BOX . ON 8 METERS 200 KGAND PSC POLE INCLUDING EXCAVATION

OF PITS AND REFILLING OF EARTH, CARTING OF TRANSFORMERS FROM STORES TO SITE

FIXING OF CHANNELS , SUPPORTING ANGLES .BRACINGS CROSS ARMS CLAMPS , ANTICLIMBING

26 9926000026 DEVICES DANGER BOARDS , CONDUCTOR AND CABLE WIRING ETC.COMPLETE AND PAINTING OF No.

FABRICATED MATERIALS USED ON THE POLE AND NUMBERING WITH COST OF PAINT AS PER

STANDARD SPECIFICATION BUT EXCLUDING ERECTION OFGUY SETS AND EARTHING.

ERECTION OF SINGLE POLE STRUCTURES WITH MOUNTING OFAB SWITCH , HG

FUSES,TRANSFORMERS , LIGHTENINGARRESTOR , DISTRIBUTION BOX . ON 9 to 11 METERS RSJ

POLE INCLUDING EXCAVATION OF PITS AND REFILLING OF EARTH, CARTING OF TRANSFORMERS

FROM STORES TO SITE , FIXING OF CHANNELS , SUPPORTING ANGLES .BRACINGS CROSS ARMS

27 9926000027 CLAMPS , ANTICLIMBING DEVICES DANGER BOARDS , CONDUCTOR AND CABLE WIRING No.

ETC.COMPLETE AND PAINTING OF FABRICATED MATERIALS USED ON THE POLE AND NUMBERING

WITH COST OF PAINT AS PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION OFGUY

SETS AND EARTHING.

28 9926000028 ERECTION OF PSC POLES OF 10 *270 KG INCLUDING EXCAVATION OF PIT AND REFILLING OF No.

EARTH, FIX ING OF CROSS ARMS , TOP FITTING CLAMPS ANTI-CLIMBING DEVICES , INSULATORS

ETC. COMPLETE AND PAINTING OF FABRICATED MATERIALS USED ON THE POLES AND

NUMBERING WITH COST OF PAINT AS PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION

OF GUY SET AND EARTHING.

ERECTION OF DOUBLE POLE STRUCTURE OF 10 METERS 270 KG PSC POLES INCLUDING

EXCAVATION OF PITS & REFILLING OF EARTHING , FIXING OF CHANNELS , SUPPORTING ANGLES

.CLAMPS , ANTI-CLIMBING DEVICES DANGER

29 9926000029 BOARDS .INSULATORS ETC.COMPLETE AND PAINTING OF FABRICATED MATERIALS USED ON THE No.

POLES AND NUMBERING WITH COST OF PAINT AS PER STANDARD SPECIFICATION BUT

EXCLUDING ERECTION OF GUY SETS AND EARTHING.(WITHOUT AB SWITCH)

30 9926000030 STRINGING OF 100MM2 ACSR/ 100MM2 AAAC CONDUCTOR FOR 11/22KV & LT LINES INCLUDING ONE COND

FIXING OFINSULATORS , BINDING JUMPERING ETC. PER KM

31 9926000031 STRINGING OF DOG CONDUCTOR FOR 11/22KV & HT LINES INCLUDING FIX ING OF INSULATORS , ONE COND

BINDING JUMPERING ETC. PER KM

ERECTION OF DOUBLE POLE STRUCTURES WITH MOUNTING OF AB SWITCH , HG FUSES,

TRANSFORMERS , LIGHTENING ARRESTORS , DISTRIBUTION BOX . OF 10 METERS 270 KGAND

PSC POLES INCLUDING EXCAVATION OF PITS AND REFILLING OF EARTH, CARTING OF

TRANSFORMERS FROMSTORES TO SITE , FIX ING OF CHANNELS , SUPPORTING ANGLES

32 9926000032 .BRACINGS CROSS ARMS CLAMPS , ANTI-CLIMBING No.

DEVICES .DANGER BOARDS , CONDUCTOR AND CABLE WIRING ETC.COMPLETE AND PAINTING OF

FABRICATED MATERIALS USED ON THE POLES AND NUMBERING WITH COST OF PAINT AS PER

STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY SETS AND EARTHING.

DISMENTALLING OF 8 MTR PSC POLE WITH CREDITING OF FABRICATION AT STORE & STACKING

33 9926000033 OF POLE SAFELY ON ROAD SIDE OR CREDITING TO DEPARTMENTAL STORE No.

DISMENTALLING OF 10 MTR PSC POLE WITH CREDITING OF FABRICATION AT STORE

9926000034 & STACKING OF POLE SAFELY ON ROAD SIDE OR CREDITING TO DEPARTMENTAL STORE No.

DISMENTALLING OF TRANSFORMER CENTRE (8 MTR PSC POLE) (WITH TRANSFORMER) WITH

CREDITING OF FABRICATION & TRANSFORMER AT STORE & STACKING OF POLE SAFELY ON ROAD

SIDE OR CREDITING TO DEPARTMENTAL STORE

36 9926000036 DISMENTALLING OF TRANSFORMER CENTRE (8 MTR PSC POLE) (WITHOUT TRANSFORMER) WITH

CREDITING OF FABRICATION AT STORE & STACKING OF POLE SAFELY ON ROAD SIDE OR

CREDITING TO DEPARTMENTAL STORE No.

STRINGING OF LT ABC OF 1*35 SQ MM + 1*25 SQ MM INCLUDING FITTING OF ALL ACESSARIES I.E.

SPECIAL DESIGN SUSPENSION I TENSION CLAMP, FIX ING OF CROSS ARM, LT SHACKLE

INSULATOR ETC. FOR FIXING OF MESSENGER WIRE AND TO PROVIDE SERVICE CONNECTION ON

AERIAL BUNCH CABLE BY INSULATED PIERCEING CONNECTORS THROUGH SERVICE

37 9926000037 CONNECTION BOX COMPLETE AS REQUIRED & DIRECTED BY ENGINEER IN CHARGE. KM

STRINGING OF LT ABC OF 3*50 SQ MM +1*25 SQ MM+1*35 SQ MM INCLUDING FITTING OF ALL

ACESSARIES I.E. SPECIAL DESIGN SUSPENSION I TENSION CLAMP, FIX ING OF CROSS ARM, LT

SHACKLE INSULATOR ETC. FOR FIX ING OF MESSENGER WIRE AND TO PROVIDE SERVICE

CONNECTION ON AERIAL BUNCH CABLE BY INSULATED PIERCEING CONNECTORS THROUGH

38 9926000038 SERVICE CONNECTION BOX COMPLETE AS REQUIRED & DIRECTED BY ENGINEER IN CHARGE. KM

STRINGING OF 11KV ABC OF 3*95 SQ MM +80 SQ MM INCLUDING FITTING OF ALL ACESSARIES I.E. KM

SPECIAL DESIGN SUSPENSION I TENSION CLAMP, FIX ING OF CROSS ARM, BINDING TO PIN

39 9926000039 INSULATOR .PREPARING SHACKLE POINT.JUMPERS ETC. AS REQUIRED & DIRECTED BY

ENGINEER IN CHARGE

40 9926000040 STRINGING OF 22 KV ABC OF 3*70 SQ MM +95 SQ MM INCLUDING FITTING OF ALL ACESSARIES KM

I.E. SPECIAL DESIGN SUSPENSION I TENSION CLAMP, FIX ING OF CROSS ARM, BINDING TO PIN

INSULATOR .PREPARING SHACKLE POINT.JUMPERS ETC. AS REQUIRED AND DIRECTED BY

ENGINEER IN CHARGE

STRINGING OF LT ABC OF 2*50 SQ MM +1*25 SQ MM+ 35 SQ MM INCLUDING FITTING OF ALL

ACESSARIES I.E. SPECIAL DESIGN SUSPENSION I TENSION CLAMP, FIX ING OF CROSS ARM, LT

SHACKLE INSULATOR ETC. FOR FIX ING OF MESSENGER WIRE AND TO PROVIDE SERVICE

41 9926000041 CONNECTION ON AERIAL BUNCH CABLE BY INSULATED PIERCEING CONNECTORS THROUGH KM

SERVICE CONNECTION BOX COMPLETE AS REQUIRED & DIRECTED BY ENGINEER IN CHARGE.

42 9926000042 DISMENTALI NG OF RSJ (9/ 11 METER) POLE AND CREDITl NG THE OLD MATERIAL TO STORE No.

DISMENTALING OF TRANSFORMER CENTER ON 10MTR,270KG PSC POLE(WITHOUT

TRANSFORMER) WITH CREDITING OF FABRICATION AT STORE AND STACKING OF POLE SAFELY

ON ROAD SIDE OR CREDITING TO DEPARTMENTAL STORE

44 9926000044 DISMENTALING OF TRANSFORMER CENTER ON 10MTR,270KG PSC POLE(WITH TRANSFORMER) No.

WITH CREDITING OF FABRICATION AT STORE AND STACKING OF POLE SAFELY ON ROAD SIDE OR

CREDITING TO DEPARTMENTAL STORE

45 9926000045 DISMENTLING OF 11KV ABC OF 3*95 SQ MM +80 SQ MM AND CREDITING FITTING OF ALL

ACESSARIES AND FABRICATION TO DEPARTMENTAL STORE KM

46 9926000046 DISMENTLING OF 22 KV ABC OF 3*70 SQ MM +95 SQ MM AND CREDITING FITTING OF ALL KM

ACESSARIES AND FABRICATION TO DEPARTMENTAL STORE

DISMENTALING OF LT ABC OF 1*35 SQ MM + 1*25 SQ MM AND CREDITING FITTING OF ALL

47 9926000047 ACESSARIES TO DEPARTMENTAL STORE. KM

48 9926000048 DISMENTALING OF LT ABC OF 3*50 SQ MM +1*25 SQ MM+1*35 SQ MM AND CREDITING FITTING OF KM

ALL ACESSARIES TO DEPARTMENTAL STORE.

49 9926000049 DISMENTALING OF LT ABC OF 2*50 SQ MM +1*25 SQ MM+ 35 SQ MM AND CREDITING FITTING OF

ALL ACESSARIES TO DEPARTMENTAL STORE. KM

RESTRINGING OF ALL TYPE OF CONDUCTOR (EXCEPT DOG CONDUCTOR) FOR ONE COND

11/22KV & LT LINES INCLUDING FIXING OF INSULATORS , BINDING JUMPERING ETC. PER KM

RESTRINGING OF DOG CONDUCTOR FOR 11/22KV HT LINES INCLUDING , BINDING JUMPERING ONE COND

51 9926000051 ETC. PER KM

52 9926000052 LABOUR CHARGE FOR THE INSTALLATION OF NEW DTR METER. (METER WILL BE PROVIDED BY No.

LABOUR CHARGE FOR THE REPLACEMENT OF DTR METER AND OLD METER SHOULD BE

CREDITED TO SDN STORE. (METER WILL BE PROVIDED BY DGVCL)

LABOUR CHARGE FOR PROVIDING CT COIL FOR DTR METER CONNECTION. (CT COIL WILL BE

54 9926000054 PROVIDED BY DGVCL) PER CT

55 9926000055 LABOUR CHARGE FOR REPLACEMENT OF CT COIL FOR DTR METER CONNECTION AND OLD CT PER CT

SHOULD BE CREDITED TO SDN STORE. (CT COIL WILL BE PROVIDED BY DGVCL)

56 9926000056 LABOUR CHARGE FOR FIXING OF MMB FOR DTR METER (MMB WILL BE PROVIDED BY DGVCL) No.

LABOUR CHARGE FOR REPLACEMENT OF DTR METER BOX. (METER WILL BE PROVIDED BY

9926000057 DGVCL) No.

58 9926000058 PROVIDING I REPLACEMENT OF 1.5 SQ MM 10 CORE COPPER CABLE 3.5 METER (CABLE TO BE No.

PROVIDED BY AGENCY)

LABOUR CHARGE FOR PROVIDING/ RECONNECTION OF TERMINAL CONNECTION WITH PROPER PER

SIZE OF LUGS. (LUGS COST IS BORNE BY AGENCY) TERMINA

LABOUR CHARGE FOR THE SPOT READING OF DTR METER WITH DETAIL SURVEY OF DEFECT IF

ANY. A DULY SIGN COPY BY SURVEYOR PERSON OF AGENCY IN PRO- FORMA REPORT SHOULD

60 9926000060 BE SUBMITTED TO SDN OFFICE.(* ONLY IF ALL PARAMETER OF VOLTAGE , CURRENT & LOAD AS PER DTR

SHOWN IN PER-FORMA IS FILLED) AS PER THE INSTRUCTION OF ENGINEER IN-CHARGE.

61 9926000061 LABOUR CHARGE FOR THE SPOT READING OF DTR METER WITH DETAIL SURVEY OF DEFECT IF PER DTR

ANY. A DULY SIGN COPY BY SURVEYOR PERSON OF AGENCY IN PRO- FORMA REPORT SHOULD

BE SUBMITTED TO SDN OFFICE. (DULY FILL PER-FORMA IN FAULT CONDITION IN WHICH READING

PARAMETER IS NOT SHOWN IN METER)

INSTALLATION OF DTR METER INCLUDING METER BOX , PROVIDING & FIXING OF 1.5SQ MM SINGLE

STRAND 10 CORE ARMOURED COPPER CABLE (3.5METER) , TERMINATION IN METER & COIL

62 9926000062 ETC.(METER , METER BOX, C.T./P.T. COIL WILL BE PROVIDED BY DGVCL) No.

INSTALLATION OF DTR METER INCLUDING METER BOX , TERMINATION IN METER & COIL ETC.

(WITHOUT 10CORE COPPER CABLE) (METER, METER BOX , C.T./P.T. COIL WILL BE PROVIDED BY

Binding of messanger Conductorat with a distance not more than 0.75 mtr with 6 turns minimum on XLPE

Cable with single strand binding wire (including cost of binding wire)

Supply and Installation of 11/22 kV Distribution Transformers HT Terminal protector (UV Resistance) with

using 95/ 120/ 150 sq.mm long barrel aluminum lug. (1Set = 3 Nos i.e. on R, Y, B)

Supply & Installation of HT EPR Tap on 11/22 kV Distribution Transformer with replacement of bare

conductor by HT ABC conductor (DO bottom side to transformer) after removal of semi conductor by HT

66 9926000087 ABC (6 inch both side). HT ABC to be supplied by DGVCL. (1Set = 3 Nos i.e. on R, Y , B) PER SET

Supply, Installation, Testing and Commissioning of Maintenance Free, Ready Capsule, Pipe-In- Cage (Pie)

Type , Earth Electrodes for HT Feeder Pole Having 2000 mm Electrode Length as per the Tender

67 9926000088 Specifications and Drawing. (All Materials Will Be Supplied By Agency) NO

Supply, Installation, Testing and Commissioning of Maintenance Free, Ready Capsule , Pipe-In- Cage (Pie)

Type , Earth Electrodes for HT Feeder Pole Having 3000 mm Electrode Length as per the Tender

68 9926000089 Specifications And Drawing. (All Materials Will Be Supplied By Agency) NO

Supply and Installation of 25 X 3 mm GI Strip having hot dip- galvanized-zinc coating of 80-100 microns

without any joints or welding. Both the end of the GI strip should be connected with GI nut bolts and required

fabrication work for giving separate earthing connections to

(1) Neutral of the transformer

69 9926000090 (2) MS structures of the transformer center (Approximately 25 meter GI strip per transformer centre Meter

- as per requirement and instruction of Engineer in- charge) (All Materials will be supplied by Agency)

Supply and Installation of uPVC standard make Pipe of 1.25" diameter for covering GI strip with UV

protected Cable Ties of 550 X 7.6 mm size to bind with pole face(Approximately 25 meter uPVC pipe for GI

70 9926000092 strip covering per transformer centre -as per requirement and instruction of Engineer in-charge. Meter

Supply & fixing of upto 33 kV Conducotr sleev for Busbar to Drop out Fuse and Drop out fuse to Transformer

H.T. including Busbar (12 mm sleev) as per technical specification. (All Materials will be supplied by Agency)

Supply & fixing of upto 33 kV Conducotr sleev for Busbar to Drop out Fuse and Drop out fuse to Transformer

H.T. including Busbar(15 mm sleev) as per technical specification. (All Materials will be supplied by Agency)

Supply & fixing of Disc type Red Color FRP(Non-flammable) material with Weather resistant , Non-

conductive bird guard OD=300 MM, ID=33 MM, Width =1.25 MM, one side cut from ID to OD. (All Materials

73 9926000095 will be supplied by Agency) NO

74 9926000096 Providing and fixing of LT Terminal protectors i.e. Re-useable boot (LT Side 1.1 kV) including LT (1.1 kV) No

insulating taps. All live part at LT side shall be covered with fixing of LT insulating taps.

75 Nvlon Net around Transformer Center

75.1 9926000097 Nvlon Net 112 * 15 ft) Per Net

75.2 9926000098 Nylon Dori Per TC

75.3 9926000099 Labour charge for fitting Nylon Net (All fabricated material for fitting nylon net shall be provided Per TC

1. DGVCL will provide key material like M.S. materials .ABC/ Bare conductors ,PSC/ RSJ Poles,lnsulators

,Fabricated materials etc. to the contractor.

2.All fabricated items shall be fabricated as per DGVCL approved drawing and by welding rods confirming to

the relevent ISi specification and as directed by Engineer in charge.

3.Necessary electricity connection for fabrictated items shall be provided by DGVCL on payment of required

charge for connection & electricity bill of the same shall be paid by the agency.

4.All the rates are inclusive of PF and Exclusive of GST applicable time to time. 5.All steel material are to be

painted as below:

(a) Scrubbing of rusted surface properly before applying the paints on to the RSJ poles & steel fabricated

materials of RSJ/ PSC poles is must required.

(b) Two coats of approved ISi mark red oxide (primer) is to be properly painted for the RSJ poles & steel

fabricated materials of RSJ/PSC poles.

(c) Two coats of approved ISi mark silver paint (i.e. triple mangoes or equivalent quality silver paint) is to be

properly painted on to the RSJ poles & steel fabricated materials of RSJ/PSC poles.

ANIXUTURE B LINE MAINTENANCE Sehedule B

Sr. Item Code Details of works Unit Rate for FY 2024-25

(A) LINE MAINTENANCE

1 9924000001 Cutting of Tree branches surounding HT/LT line Per

2 9924000002 Replacement of old jumpers & providing new double jumpers with 8" binding [D Type] & capsuling with PVC pipe No.

3 9924000005 Support pole for Stay PSC/STP/RSJ No.

4 9924000006 Pin binding of conductor 11/22kv Pin insulator No.

5 9924000007 Pin binding of conductor 11/22kv Pin insulator per pole in costle area with cleaning . No.

6 9924000008 Pin binding of conductor LT shakel insulator No.

7 9924000009 Replacement of one/ both disc.insulator at strain pole No.

8 9924000010 Replacement of LT shackle insulator at cut point No.

9 9924000011 Refixing of V cross Arm No.

10 9924000012 Replacement of V cross Arm (With Transportation & Painting) No.

11 9924000013 Refixing of Top fitting in proper position No.

12 9924000014 Replacement of Top fitting No.

13 9924000015 Replacement of LT cross Arm No.

14 9924000016 Providing DO fuse on DP with carting & jumpuring(ONE DO FUSE) No.

15 9924000017 Numburing of pole with paint by preparing back ground of one colour and have lettering(height 3" * width 0.5") No.

16 9924000018 Fixing of MMB(1PH.) at consumer end No.

17 9924000019 Fixing of MMB(3PH.) at consumer end No.

18 9924000020 Replacement of (1ph.) meter for Urban area No.

19 9924000021 Replacement of (1ph.) meter for Rural area No.

20 9924000022 painting consumer no. on MMB (Urban) (with letter size height 40mm* width 8mm) No.

21 9924000023 painting consumer no. on MMB (Rural) (with letter size height 40mm* width 8mm) No.

22 9924000024 Replacement of deteriorated Single phase Service line No.

23 9924000025 Fixing of new dist. Box with complete wiring including clamps.nut bolts etc. No.

24 9924000026 Reparing of guarding involving reshaping of bearer wire cross lacing binding etc. R Mtr.

25 9924000027 Painting of steel fabricated material of RSJ DO DP structure with paint No.

26 9924000028 Painting of steel fabricated material of RSJ pole mounted transformer double pole structure with paint No.

27 9924000029 Painting of steel fabricated material of RSJ single pole with paint No.

28 9924000030 painting of steel fabricated material of PSC Single pole (HT line) with paint No.

29 9924000031 painting of steel fabricated material of PSC DO DP double pole with paint No.

30 9924000032 painting of steel fabricated material of PSC double pole at pole mounted transformer with paint No.

31 9924000033 Providing line seperater single phase No.

32 9924000034 Providing line seperater three phase No.

33 9924000035 Replacement I Providing of stay insulator along with adjustment of tension in stay wire No.

34 9924000036 Replacement of deteriorated /providing LT dist. Box with new up to 1OOKVA capacity & crediting it to store. No.

35 9924000037 Replacement of deteriorated /providing LT dist. Box with new above 1OOKVA capacity & crediting it to store. No.

36 9924000038 Adjustment of tension in stay wire No.

37 9924000039 Refitting of LA No.

38 9924000040 Converting pin point to Shackle point including dismentaling & restringing etc. location

39 9924000041 replacement of 11KV Pin insulator with providing new double pin binding No.

40 9924000042 replacement of 22KV Pin insulator by new 11kv pin insulator with spares & providing new double pin binding No.

41 9924000043 Providing 11kv double disc insulators with binding & restringing No.

42 9924000045 Replacement of existing 11kv conductor (all size) with new double pin binding Cond/K

43 9924000046 Plumbing of PSC Pole with straightening at pin point No.

44 9924000047 Plumbing of PSC Pole with straightening at tension point No.

45 9924000048 Plumbing of tilted DP structure (PSC/ RSJ/STP) with refilling of stone Murrum etc. No.

46 9924000049 Providing new 11kv AB /GO switch with fabrication and insulated colour code jumper, binding, lugs etc Set

47 9924000051 Replacement of old 11kv AB /GO switch with providing new insulated jumper , binding, lugs etc Set

48 9924000052 Providing cage type loop guard in verticle LT line with using PVC reel insulators etc per

49 9924000053 Labour charges for replacement /providing of MMB & service with all accessories for three phase connection No.

50 9924000054 Labour charges for replacement /providing of MMB & service with all accessories for single phase connection No.

51 9924000055 Dismentalling of existing Dist.X'mer center(RSJ /STP POLE) 25/63/ 100/200 KVA with all fabrication & creditig the No.

old material to store

52 9924000056 Disconnection from LT pole 1 phase No.

53 9924000057 Reconnection from LT pole 1 phase No.

( payment after receipt of R/C charges)

54 9924000058 Disconnection from LT pole 3 phaseo No.

55 9924000059 Reconnection from LT pole 3 phase No.

( payment after receipt of R/C charges)

56 9924000060 Dismentaling & removing of service line from pole & crediting to S/dn (1 ph.) No.

57 9924000061 Dismentaling & removing of service line from pole & crediting to S/dn (3 ph.) No.

58 9924000062 Reconnection of service line complete with PVC cable (1 Ph) No.

59 9924000063 Reconnection of service line complete with PVC cable (3 Ph) No.

Providing spiral type earthing by G.I. NO 8(weight 2kg -5mtr in length) with salt and coal 10kg each, including pvc

60 9924000064 rigid pipe 20mm dia( 1.5mtr length) to pass exposed part of G.I. wire at consumer end with all materials , earth No.

resistance should be less than 2 ohms

Providing and fixing of signle core 1.5 sq mm single strand copper insulated cable with cable nail clip for spiral

type earthing at consumer end. The end of G.I. no 8 is to be connected by connector with copper cable of which per

other end shall be connected to the earth terminal of meter box. This item shall be used in location where there is meter

more distance between earth terminal and earthing terminal of meter. (All materials

(C) REPLACEMENT OF BARE CONDUCTOR BY HT ILT AERIAL BUNCH CONDUCTOR

Stringing of LT ABC of 1*35 SQ MM + 1*25 SQ MM including fitting of all acessaries i.e. special design

suspension I tension clamp, fixing of cross arm, LT shackle insulator etc. for fixing of messenger wire and

9924000065 inclusive of dismantling charge of existing bare conductor and crediting in to store & dismentaling of service line

from LT bare conductor and to provide service connection on Aerial Bunch Cable by insulated

pierceing connectors through service connection box complete as required & directed by Engineer in Charge.

Stringing of LT ABC of 3*50 SQ MM +1*25 SQ MM+1*35 SQ MM including fitting of all acessaries i.e. special

design suspension I tension clamp, fixing of cross arm, LT shackle insulator etc. for fixing of messenger wire and

9924000066 inclusive of dismantling charge of existing bare conductor and crediting in to store & dismentaling of service line

from LT bare conductor and to provide service connection on Aerial Bunch Cable by insulated pierceing

connectors through service connection box complete as required & directed by Engineer in Charge.

9924000067 Stringing of 11KV ABC of 3*95 SQ MM +80 SQ MM including fitting of all acessaries i.e. special design KM

suspension I tension clamp, fixing of cross arm, binding to pin insulator ,preparing shackle point.jumpers etc. and

64 inclusive of dismantling charge of existing bare conductor and crediting in to store complete as required &

directed by Engineer in Charge

9924000068 Stringing of 22 KV ABC OF 3*70 SQ MM +95 SQ MM including fitting of all acessaries i.e. special design KM

suspension I tension clamp, fixing of cross arm, binding to pin insulator ,preparing shackle point.jumpers etc. and

65 inclusive of dismantling charge of existing bare conductor and crediting in to store complete as required &

directed by Engineer in Charge

Stringing of LT ABC of 2*50 SQ MM +1*25 SQ MM+ 35 SQ MM including fitting of all acessaries i.e. special

design suspension I tension clamp, fixing of cross arm, LT shackle insulator etc. for fixing of messenger wire and

inclusive of dismantling charge of existing bare conductor and crediting in to store & dismentaling of service line

from LT bare conductor and to provide service connection on Aerial Bunch Cable by insulated pierceing

connectors through service connection box complete as required & directed by Engineer in Charge.

1.DGVCL will provide key material like M.S. materials.ABC/Bare conductors ,PSC/RSJ Poles,lnsulators ,Fabricated

Note: materials etc. to the contractor.

2.All fabricated items shall be fabricated as per DGVCL approved drawing and by welding rods confirming to the relevent

ISi specification and as directed by Engineer in charge.

3.Necessary electricity connection for fabrication items shall be provided by DGVCL on payment of required charge for

connection & electricity bill of the same shall be paid by the agency.

4.All the rates are inclusive of PF & Exclusive of GST applicable time to time. 5.All steel material are to be painted as

ANNIXUTURE C Sehedule C

LABOUR RATE FOR UNDERGROUND CABLE WORK FOR FY 2024-25 (WITHOUT GST)

Sr. Item Code Description Unit Rate for FY

Labour charge for excavation of cable trench of 400mm width x 1200mm depth , in any type of soil for laying of

1 9925000001 cable of size up to 240 mm2 (For additional cable 200 mm additional width shall be considered i.e. half trench Meter

length is to be considered)

Labour charge for excavation of cable trench of 600mm width x 1200mm depth , in any type of soil for laying of

2 9925000002 cable of size up to 240 mm2 (For additional cable 200 mm additional width shall be considered i.e. half trench Meter

length is to be considered)

Labour charge for excavation of cable trench of 400mm width x 1500mm depth , in any type of soil for laying of

3 9925000003 cable of size up to 240 mm2 (For additional cable 200 mm additional width shall be considered i.e. half trench Meter

length is to be considered)

Labour charge for laying of 11kV / 22 kV XLPE Cable of size up to 240 mm2 & preparation of sand layer 100mm

thick , in the cable trench & covering the cable with 150 mm dia (Inner), thickness 25 mm, 1.0 meter long RCC

half round muffs and providing and fixing of 4inch width yellow colour polyethylene tape with printing "CAUTION

ELECTRIC CABLE BELOW" at 0.75 m depth from ground surface after laying cable in trench. This will provide

indication that electric cable is passing underground so as to protect cable from mechnical injuries, refilling the

same , as per Instruction of Engineer in Charge (EiC).

Labour charge for horizontal drilling using Auger machine without damage to surface road at max 2.0 mtrs

depth & putting of 6.11 kg/cm2 , class-4,Green color , 11Omm O.D. , 8.5mm thickness H.D.P.E. pipe confirms to

IS 4984- 1987(3rd revision) and BIS certification and laying of 11KV/22KV XLPE cable of

5 9925000005 size up to 240 mm2 in HOPE pipe, as per Site Condition (excluding cost of pipe). The detail map obtained from Meter

HOD machine and excell sheet(hard and soft copy) indicating the respective depth and distance from adjacent

landmark for each segment for HOD is must required to be submitted. HOD to be carried out at

depth 1.5 mtrs to 2.0 mtrs as per site conditions and as per instruction of EiC.

Labour charge for horizontal drilling manually without damage to surface road at max 2.0 mtrs depth & putting of

6.11 kg/cm2 , class-4 ,Green color, 110mm

O.D. , 8.5mm thickness H.D.P.E. pipe confirms to IS 4984-1987(3rd revision) and BIS certification and laying of

9925000006 11KV/22KV XLPE cable of size up to 240 mm2

size , as per Site Condition (excluding cost of pipe). The detail map and excell sheet(hard and soft copy)

indicating the respective depth and distance from adjacent landmark for each segment of cable to be submitted.

Drilling to be carried out at depth Minimum 1.2 mtrs to 2.0 mtrs as per site conditions as per instruction of EiC.

Supply of 6.11 kg/cm2 , class-4,Green color , 11Omm O.D. , 8.5 mm thickness

7 9925000007 H.D.P.E. pipe confirms to IS 4984 and BIS certification for laying of underground 11KV / 22KV XLPE cable up to Meter

Labour work for RCC concreting on disputed location and repairing of damage portion of road crossing for the

8 9925000008 work carried out for roads crossing as well as concreting & muffing of ploes including all materials (1:2:4) CMT

Providing & fixing concrete stone route marker of 300 mm width x 150 mm thick x 650 mm height embedded in

earth at least 300 mm below & 350 mm above ground level respectively at distance approx 50 meters along the

length of cable. The RCC concreting (1:2:4)(all necessary maeterials will be in bidder's scope) of route marker is

to be carried out 300 mm width x 150 mm thick x 300 mm below ground level as per instruction of EiC. The No.

route marker should be with name of company with approved yellow colour-DGVCL. The distance from marker to

cable and cable depth with feeder name etc., marked with arrow sign is to be painted on it.The route marker is to

be fixed at location near to any fixed permanent location (not necessary to fix exact on top of cable) as per

instruction of EiC.

Erection of D.P. (double pole) structure using 9 / 11 Mtr. RSJ pole with cable connection arrangement along with

10 9925000010 fitting of necessary fabrication for 11KV cable including excavation of pit & refilling of earth as per instruction of No.

EiC. (Exclusive of concreting & muffing of poles)

Erection of Single pole structure using 9 / 11 Mtr RSJ pole with cable connection arrangement along with fitting

11 9925000011 ofnecessary fabrication for 11KV/22 KV cable including excavation of pit & refilling of earth as per instruction of No.

EiC. (Exclusive of concreting & muffing of poles)

Erection of D.P. (double pole) structure using 8.0 Mtr. PSC pole with cable connection arrangement along with

12 9925000012 fitting of necessary fabrication for 11KV cable including excavation of pit & refilling of earth as per instruction of No.

EiC. (Exclusive of concreting & muffing of poles)

Erection of Single pole structure using 8.0 Mtr PSC pole with cable connection arrangement along with fitting

13 9925000013 ofnecessary fabrication for 11KV/22 KV cable including excavation of pit & refilling of earth as per instruction of No.

EiC. (Exclusive of concreting & muffing of poles)

Labour charge for erecting of 11kV / 22 kV XLPE cable of size up to 240 mm2 on DP Structure with fixing of

14 9925000014 Nos polymer cleats on top and middle part.Polymer cleats, nut bolts etc. fixing material to be provided by Per Job

Providing & fixing of 6.11kg/cm2 , class-4,Green color, 110mm O.D. , 8.5mm thickness H.D.P.E. pipe confirms to

IS 4984 and BIS certification on the erected DP structure for the mechanical protection of cable by inserting the

15 9925000015 cable inside HOPE pipe. The HOPE pipe shall be erected in such a way that 300mm shall be below the ground Per Job

level and the rest 2700 mm shall be supported on the DP Structure with 01 No Polymer cleat.All materials

including polymer cleat and Nut bolt to be provided by contractor.

Providing and fixing of pipe type earthing from 80 mm dia class-B GI pipe with pit to be filled with salt & coke and

construction of chamber as per DGVCL Drg.

No. dg / 100 for DP and cable. The earthing pit should be joined with cable by G.I. strip of size 1" width & 2 mm

thick. All material GI pipe, Coke, Salt etc will be supplied by bidder.

17 9925000017 Supply & fixing of heat shrink type end terminations (outdoor) for upto 11kV 3C x 185 mm 2 size XLPE cable as No.

per DGVCL technical specification

18 9925000018 Supply & fixing of heat & shrinkable end terminations (outdoor) for upto 22 kV 3C x 185 mm 2 size XLPE cable as No.

per DGVCL technical specification)

19 9925000019 Supply & fixing of heat shrink type end terminations (indoor) for upto 11kV 3C x 185 mm 2 size XLPE cable as per No.

DGVCL technical specification)

20 9925000020 Supply & fixing of heat & shrinkable end terminations (indoor) for upto 22 kV 3C x 185 mm 2 size XLPE cable as No.

per DGVCL technical specification

21 9925000021 Supply & fixing of heat shrinkable straight through joint for upto 11kV 3C x 185 mm 2 size XLPE cableas per No.

DGVCL technical specification.

22 9925000022 Supply & fixing of heat shrinkable straight through joint type for upto 22kV 3C x 185 mm 2 size XLPE cable as No.

per DGVCL technical specification

Labour charge for excavation of 2100mm long x 1200mm wide x 1200 mm deep joint pits for installation of

11kV / 22kV Straight through joints as per instruction of engineer-in-charge & covering the cable with 150 mm

dia (Outer), thickness 25 mm, 1.0 meter long RCC half round muffs & refilling same as per instruction of EiC .

Providing and fixing of insulating bus bar, made from 11KV/22KV XLPE cable after removal of semi conducting

layer and applying of PVC heat shrinkable anti- tracking core insulating tubing (1.1KV), on both end terminal

using Aluminium long barrel heavy duty up to 240 sq mm lugs, Aluminium bus connector. Taping with PG- clamp

for bus conductor as per drawing and as per instruction of EiC. The Alluminium lugs and PG clamp shall be

covered with 11KV/22KV HT insulating tapes.(11 KV/22KV XLPE cable will be in scope of DGVCL while all other

materials will be in bidder's scope)

25 9925000025 Testing of cable at various points and commissioning the feeder as per instruction of engineer-in-charge.Test No.

result shall be submitted by contractor with bill.

Preparation and submission of 6 (six) copies, of complete layout drawings with GIS mapping as per actual cable Set

routing showing road crossing, HOPE pipesleeving , jointing locations, markers etc.

Providing and fixing of Sign Board at junction point Made out of 2 mm aluminium sheet size 750x300 mm (2.5 x

1ft) rectangle, as per design , pre treated with phosphate process and acid etching coated with one coat of epoxy

primer and two coats of best quality paints, refloctrorised with Hi-Intensity retro - reflective sheeting as per the

27 9925000027 latest and frame fabricated from suitable size iron angle. The Sign Board is to be fixed on the base prepared from No.

channel and bracing angles which is grouted by means of cement concreting of 1:2:4 for size of 300 mm dia x

800 mm height (500 mm to be grouted in ground). The details to be displayed on sign board will be given by In-

charge Engineer.

Providing and fixing of Sign Board (Danger Board) on Distribution Transformer Centers

Made out of 2mm aluminium sheet size 300x300mm (1x1ft) as per design, pre treated with phosphate process

and acid etching coated with one coat of epoxy primer and two coats of best quality paints, refloctrorised with Hi-

Intensity retro- reflective sheeting as per the latest and frame fabricated from suitable size iron angle. The Sign

Board (Danger Board is to be fixed at the location as per instruction of In-charge Engineer.

(a) Hi intensity Micro prismatic Grade

Providing & fixing of aluminium tag of size 250 mm (L) x 75 mm (W) from 3 mm aluminium sheet along with

mm dia aluminium binding wire for fixing of aluminium tag near end termination joint at DP structure for identifyng

the cable. The details of feeder i.e. 11 / 22 KV with feeder name shound be punched on the tag by letter punch of No.

size 16 mm as per instruction of In-charge Engineer.

30 9925000030 Supply & fixing of heat shrink type end terminations (outdoor) for 11kV 3C x No.

240 mm2 size XLPE cable as per DGVCL technical specification

31 9925000031 Supply & fixing of heat & shrinkable end terminations (outdoor) for 22 kV 3C x No.

240 mm2 size XLPE cable as per DGVCL technical specification)

32 9925000032 Supply & fixing of heat shrink type end terminations (indoor) for 11kV 3C x No.

240 mm2 size XLPE cable as per DGVCL technical specification)

33 9925000033 Supply & fixing of heat & shrinkable end terminations (indoor) for 22 kV 3C x No.

240 mm2 size XLPE cable as per DGVCL technical specification

34 9925000034 Supply & fixing of heat shrinkable straight through joint for 11kV 3C x 240 mm2 size XLPE cableas per DGVCL No.

technical specification.

35 9925000035 Supply & fixing of heat shrinkable straight through joint type for 22kV 3C x 240 mm2 size XLPE cable as per No.

DGVCL technical specification

36 9925000038 Installation, Testing and commissioning of 11 KV,630 A SCADA Compatible , RRL type- 3 Way RMU including No.

Two numbers of earthings as per Drawing (material is in bidder's scope) and as per DGVCL Technical

37 9925000039 Installation, Testing and commissioning of 11 KV,630 A SCADA Compatible , RRLL type- 4 Way RMU including No.

Two numbers of earthings as per Drawing (material is in bidder's scope) and as per DGVCL Technical

38 9925000040 Installation, Testing and commissioning of 22KV,630 A SCADA Compatible , RRL type-3 Way, RMU including No.

Two numbers of earthings as per Drawing (material

is in bidder's scope) and as per DGVCL Technical specification.

Installation, Testing and commissioning of 22KV,630 A SCADA Compatible , RRLL type-4 Way, RMU including

39 9925000041 Two numbers of earthings as per Drawing (material is in bidder's scope) and as per DGVCL Technical No.

Construction of plinth for 11KV, RRL type- 3 Way (i.e Two numbers of Isolator

40 9925000042 & One number of Breaker) Ring Main Unit as per DGVCL's technical specification mentioned in drawing no: Drg. No.

11kv-01. All required material will be supplied by contractor.

Construction of plinth for 11KV, RRLL type- 4 Way (i.e Two numbers of Isolator & Two number of Breaker)Ring

41 9925000043 Main Unit as per DGVCL's technical specification mentioned in drawing no:Drg. 11kv-02.All required material will No.

be supplied by contractor.

Construction of plinth for 22KV, RRL type- 3 Way (i.e Two numbers of Isolator

42 9925000044 & One number of Breaker) Ring Main Unit as per DGVCL's technical specification mentioned in drawing no: Drg. No.

22kv-01. All required material will be supplied by contractor

Construction of plinth for 22KV, RRLL type.4 Way (i.e Two numbers of isolalor & Two number of Breaker)Ring

43 9925000045 Main unit as per DGVCL S technical specification mentioned in drawing no. Drg. 22kv-02 All required material will No.

be supplied by contractor.

Modifications e.g.Providing and fixing of Terminal protectors i.e. Re-use able boot (HT Side 11/22KV, LT Side

1.1KV) including 11/22 KV insulating taps and L.T.(1.1 KV) insulating taps ,Busbar, Tapping from Bus Bar (11/22

9925000046 KV XLPE cable) through P.G. Clamp for H.T. Jumper to D.O. Fuse to bushings of Transformer Center, providing

& Fixing of jumper and providing & fixing of Heat Shrinkable Anti Tracking Core Insulating Tubing (Insulation

Level 11/22 KV) in H.T. jumper , Clamping arrangement of cable support frame on both side of existing Over

Head type Distribution

Laying of any size of 11/ 22 KV XLPE /PILC Cable in redaymade trench or in open space Per

46 9925000060 Labour charges for Lying of O/H XLPE cable pole to pole Per Mtr

9925000064 Supply of 150 mm dia (Inner) , thickness 25 mm, 1.0 meter long RCC half round pipe No.

1.DGVCL will provide key material like M.S. materials.ABC/Bare conductors ,PSC/RSJ Poles,lnsulators

materials etc. to the contractor.

2.All fabricated items shall be fabricated as per DGVCL approved drawing and by welding rods confirming to the

relevent ISi specification and as directed by Engineer in charge.

3.Necessary electricity connection for fabrication items shall be provided by DGVCL on payment of required

charge for connection & electricity bill of the same shall be paid by the agency.

Note: 4.All the rates are inclusive of PF & Exclusive of GST applicable time to time. 5.All steel material are to be

painted as below:

(a) Scrubbing of rusted surface properly before applying the paints on to the RSJ poles & steel fabricated

materials of RSJ/PSC poles is must required.

(b) Two coats of approved ISi mark red oxide (primer) is to be properly painted for the RSJ poles & steel

fabricated materials of RSJ/PSC poles.

(c) Two coats of approved ISi mark silver paint (i.e. triple mangoes or equivalent quality silver paint) is to be

properly painted on to the RSJ poles & steel fabricated materials of RSJ/ PSC poles.

RUPEES IN WORDS: TWENTY EIGHT LAKH ONLY

EXEUCTIVE. ENGINEER (O&M);

DAKSHIN GUJARAT VIJ COMPANY LIMITED

VALSAD CITY DN.

1 The rates required with all taxes but exclusive of GST.

2 DGVCL will provide 1 ph. & 3 ph. LT Aerial Bunch Cable / 11 & 22 KV HT Aerial Bunch

inclusiveaccessories to the

of dismantling contractor.

charges of existing bare conductor and crediting

4 in tocontractor

The store & dismantling of service

has to collect all the lines frommaterials

required LT bare conductor andstore

from DGVCL to provide

Cement theshould

dismantle material

be used by thetocontractor

the DGVCLofstore at their cost.

6 Bolts & Nuts will be provided by the company.