Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹6.8 LAdmitted-Finance | ₹6.8 L | L1 | Admitted-Finance |
| 2 | L2₹7.0 LAdmitted-Finance | ₹7.0 L | L2 | Admitted-Finance |
| 3 | Rejected-Technical | - | - | Rejected-Technical Not qualified |
| Sl No | Description | Qty | Unit | MANU M L1 | THOMAS V T L2 |
|---|---|---|---|---|---|
| 1.00 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. | 1,016 | kg. | 210 ₹2.1 L | 185 ₹1.9 L |
| 2.00 | Labour charges for fabrication and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. Aluminium sections will be supplied by the department at free of cost. (Glazing, paneling and dash fasteners to be paid for separately) : | 404 | kg. | 170 ₹68,680 | 300 ₹1.2 L |
| 3.00 | Providing and fixing in wall lining using 12 mm thick Calcium Silicate Boards with necessary fixing arrangements and screws etc. All joints shall be finished with adhesive dry wall joint tap and gypsum putty, etc complete all as directed by EIC | 250 | sqm | 1,325 ₹3.3 L | 1,300 ₹3.3 L |
| 4.00 | Providing and applying white cement based putty of average thickness1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. | 123 | sqm | 190 ₹23,370 | 160 ₹19,680 |
| 5.00 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : | 123 | sqm | 130 ₹15,990 | 150 ₹18,450 |
| 6.00 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. | 123 | sqm | 180 ₹22,140 | 210 ₹25,830 |
| 7.00 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 300x16 mm | 2 | Nos | 500 ₹1,000 | 250 ₹500 |
| 8.00 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 300x10 mm | 2 | Nos | 200 ₹400 | 300 ₹600 |
| 9.00 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :125 mm | 2 | Nos | 100 ₹200 | 200 ₹400 |
Tender Value
₹7.3 L
EMD Value
₹14,633
Closing Date
9 Mar 2026, 4:00 pmClosed
PE cum EO (I/C)
STA (Civil)
Providing partition wall for the store rooms for Anamudi A and B Block at IISER TVM Campus Thiruvananthapuram
2026_IISRT_901129_1
IISER-T/2029/47/2025-26 dated 03-03-2026
Open Tender
Civil Works
30 days
IISER, Maruthamala, Vithura
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹14,633
12 Mar 2026
3 Mar 2026
10 Mar 2026
4 Mar 2026
9 Mar 2026
4 Mar 2026
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
Labour charges for fabrication and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. Aluminium sections will be supplied by the department at free of cost. (Glazing, paneling and dash fasteners to be paid for separately) :
Providing and fixing in wall lining using 12 mm thick Calcium Silicate Boards with necessary fixing arrangements and screws etc. All joints shall be finished with adhesive dry wall joint tap and gypsum putty, etc complete all as directed by EIC
Providing and applying white cement based putty of average thickness1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :
Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 300x16 mm
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 300x10 mm
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :125 mm
Please Enable Macros to View BoQ information
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.00 MB
BOQ_947171.xls
BOQ • 0.33 MB
Download all tender documents and submit your bid