Repair and Renovation of Annex Building at KVIC, Irla Road, Vile Parle West, Mumbai.

Name of Work: Repair & Renovation of Annex Building at KVIC, IRLA Road, Vile Parle (W), Mumbai - 400 056

SUMMARY FOR COST

ESTIMATED AMOUNT (Rs.)

S.No. Description

DSR NS TOTAL (Rs.)

2 Electrical Work based on DSR-2022 13,48,591.00 7,60,732.00 21,09,323.00

3 Plumbing Work based on DSR-2023 1,75,314.00 2,53,579.00 4,28,893.00

GST @ 18% charges on NS items - 27,12,689.10 27,12,689.10

GROSS AMOUNT INCLUDING GST 57,02,345.00 1,77,83,184.00 2,34,85,529.00

(Rupees Two Crore Thirty-Four Lakh Eighty-Five Thousand Five Hundred Twenty-Nine only)

inclusive of GST and all other statutory taxes, duties, levies etc.

1 All tenderers should visit the site before quoting the rate to understand the nature of work and condition of the site.

The rates shall be quoted inclusive of all materials, wastage, labour, shifting charges etc. required for successful completion of

this work. No additional payment shall be done for this purpose.

The work shall be required to carry out without obstructing the person's movements and may also be required to carry out

beyond office hours (if required) for which no additional payment shall be made.

The site shall be kept neat & cleaned of any debris / malba at all times on daily basis for which no additional payment shall be

made for this purpose failing which same shall be done through other agency at the risk & cost of the contractor.

Digitally signed by SHUBHAM

Name of Work: Repair & Renovation of Annex Building at KVIC, IRLA Road, Vile Parle (W), Mumbai - 400 056 (Maharashtra)

S.No. DSR 2023 Description of items Unit Quantity

DSR NS DSR 2023 NS

A Sub Head:- Dismantling & Demolishing

Demolishing cement concrete manually/ by mechanical

15.2 means including disposal of material within 50 metres

(Page no. 239) lead as per direction of Engineer - in - charge.

Nominal concrete 1:3:6 or richer mix (i/c equivalent

Nominal concrete 1:4:8 or leaner mix (i/c equivalent

Demolishing brick work/ coba work by manually/ by

15.7 mechanical means including stacking of serviceable

(Page no. 239) material and disposal of unserviceable material within

50 metres lead as per direction of Engineer-in-charge.

Dismantling tile work in floors and roofs laid in cement

3 mortar including stacking material within 50 metres

15.23.1 For thickness of tiles 10 mm to 25 mm Sq.m 480.00 73.40 35,232.00

Dismantling old plaster or skirting raking out joints and

4 cleaning the surface for plaster including disposal of Sq.m 1505.88 54.65 82,296.28

rubbish to the dumping ground within 50 metres lead

Digitally signed by SHUBHAM

S.No. DSR 2023 Description of items Unit Quantity

DSR NS DSR 2023 NS

Cleaning, Lowering down, Disposal of all debris/ malba

obtained from dismantling/ demolishing/ breaking and

removing of plaster/ brick masonry/ concrete etc. from

all floors by any means without causing dust nuisance

and damage to structure, stacking the same as and

5 NS where directed including cleaning the site complete. Cu.m 141.84 1,163.00 1,64,955.62

The cost is including disposal of debris/ malba/ similar

unserviceable or waste material by mechanical

transport including loading, transporting, unloading to

approved municipal dumping ground for all leads &

lifts, complete.

B Sub Head:- Repairs & New Work to Building

Providing and laying in position cement concrete of

1 specified grade excluding the cost of centering and

shuttering - All work up to plinth level :

1:2:4 (1 Cement : 2coarse sand (zone-III) derived from

4.1.4 natural sources : 4 graded stone aggregate 40 mm Cu.m 61.97 7,780.30 4,82,176.96

nominal size derived from natural sources)

Providing and fixing Ist quality ceramic glazed wall tiles

conforming to IS: 15622 (thickness to be specified by

the manufacturer), of approved make, in all colours,

shades except burgundy, bottle green, black of any

8.31 size as approved by Engineer-in-Charge, in skirting,

(Page no. 143) risers of steps and dados, over 12 mm thick bed of

cement mortar 1:3 (1 cement : 3 coarse sand) and

jointing with grey cement slurry @ 3.3kg per sqm,

including pointing in white cement mixed with pigment

of matching shade complete.

Digitally signed by SHUBHAM

S.No. DSR 2023 Description of items Unit Quantity

DSR NS DSR 2023 NS

Kota stone slab flooring over 20 mm (average) thick

base laid over and jointed with grey cement slurry

mixed with pigment to match the shade of the slab,

3 including rubbing and polishing complete with base of

cement mortar 1 : 4 (1 cement : 4 coarse sand) :

Kota stone slabs 20 mm thick in risers of steps,

skirting, dado and pillars laid on 12 mm (average) thick

cement mortar 1:3 (1 cement: 3 coarse sand) and

11.27 jointed with grey cement slurry mixed with pigment to

(Page no. 192) match the shade of the slabs, including rubbing and

polishing complete.

11.31 Extra for pre finished nosing in treads of steps of Kota

(Page no. 193) stone/ sand stone slab.

Providing and laying vitrified floor tiles in different sizes

(thickness to be specified by the manufacturer) with

water absorption less than 0.08% and conforming to

IS: 15622, of approved make, in all colours and

shades, laid on 20mm thick cement mortar 1:4 (1

cement : 4 coarse sand), jointing with grey cement

11.41 slurry @ 3.3 kg/ sqm including grouting the joints with

(Page no. 194) white cement and matching pigments The tiles must

be cut with zero chipping diamond cuttier only. laying

of tiles will be done with notch trovel, pile wedge, clips

of required thickness, levelling system and rubber

mallet for placing the tiles gently and easiliy etc,

Digitally signed by SHUBHAM

S.No. DSR 2023 Description of items Unit Quantity

DSR NS DSR 2023 NS

11.41A.1 Double charge vitrified tile polished finished of size

Providing and laying Vitrified tiles in different sizes

(thickness to be specified by manufacturer), with water

absorption less than 0.08 % and conforming to I.S.

15622, of approved make, in all colours & shade, in

7 skirting, riser of steps, over 12 mm thick bed of cement

(Page no. 195) mortar 1:3 (1 cement: 3 coarse sand), jointing with grey

cement slurry @ 3.3 kg/ sqm including grouting the

joint with white cement & matching pigments etc.

8 6 mm cement plaster of mix :

13.46 Finishing walls with Acrylic Smooth exterior paint of

(Page no. 220) required shade :

New work (Two or more coat applied @ 1.67 ltr/10 sqm

13.46.1 over and including priming coat of exterior primer Sq.m 1027.44 164.70 1,69,219.65

applied @ 0.90 litre/10 sqm)

Providing and applying white cement based putty of

average thickness 1 mm, of approved brand and

10 manufacturer, over the plastered wall/ceiling surface to Sq.m 2957.32 156.05 4,61,489.26

(Page no. 223) prepare the surface even and smooth complete.

Digitally signed by SHUBHAM

S.No. DSR 2023 Description of items Unit Quantity

DSR NS DSR 2023 NS

Wall/Ceiling painting with acrylic emulsion paint, having

VOC (Volatile Organic Compound) content less than

11 50 grams/ litre, of approved brand and manufacture,

including applying additional coats wherever required,

to achieve even shade and colour.

Applying priming coats with primer of approved brand

12 and manufacture, having low VOC (Volatile Organic

Compound ) content.

With water thinnable cement primer on wall/ceiling

surface having VOC content less than 50 grams/ litre

Removing white or colour wash by scrapping and sand

13.88 papering and preparing the surface smooth including

(Page no. 224) necessary repairs to scratches etc. complete

Repairs to plaster of thickness 12 mm to 20 mm in

patches of area 2.5 sq.meters and under, including

cutting the patch in proper shape, raking out joints and

14.1 preparing and plastering the surface of the walls

(Page no. 229) complete, including disposal of rubbish to the dumping

ground, all complete as per direction of Engineer-in-

14.1.1 With cement mortar 1:4 (1 cement : 4 fine sand) Sq.m 680.40 547.40 3,72,450.96

Raking out joints in lime or cement mortar and

14.17 preparing the surface for re-pointing or replastering,

(Page no. 230) including disposal of rubbish to the dumping ground, all

complete as per direction of Engineer-in-Charge.

Digitally signed by SHUBHAM

S.No. DSR 2023 Description of items Unit Quantity

DSR NS DSR 2023 NS

Hacking of CC flooring including cleaning for surface

16 etc. complete as per direction of the Engineer-in- Sq.m 736.58 3.45 2,541.21

C Sub Head:-Strengthening Work

1 REMOVING OF DAMAGED CONCRETE

Carefully removing existing damaged loose and

disintegrated concrete of R.C.C. members at all

heights, levels and surfaces at any thickness & carting

NS away debris to all leads & lifts all complete or as Sq.m 750.00 350.00 2,62,500.00

directed by the EIC. The rate excluding scaffolding/

working platform/safety nets etc.

which are required.

2 CORROSION INHIBITOR THROUGH NOZZLE

Corrosion inhibitor through nozzle, Inject migrating

NS corrosion inhibitor in all the nozzles fixed in grid Kg 900.00 950.00 8,55,000.00

fashion through all RCC members.

3 INJECTION GROUTING FOR CONCRETE

Digitally signed by SHUBHAM

S.No. DSR 2023 Description of items Unit Quantity

DSR NS DSR 2023 NS

Epoxy Resin Grout (Non Shrink Free flow low visco

solvent free epoxy grouting required) or (High

Molecular Thermoset Polymer Grouting.

Providing and injecting low viscosity Solvent free epoxy

of MYK Arment ArmGrout inject EP-LV & equivalent in

the ratio of resin and hardener by grouting pump at a

pressure @ 3-6 Kg/cm2 or as instructed by EIC etc

complete. After grouting is completed after 24 hours,

cut the nipples and seal it with polymer-modified

mortor of MYK Arment Rearm Fis 10 S & equivalent

as per specifications given above.

Approximate No. of Nozzles. Considering 600 x 600

mm grid at honeycomb area and 150 mm c/c along

the crack.(depth of drilling should be 200 mm)

4 MICRO FINE CEMENT GROUT

Providing and injecting micro fine cement with

polymer. In the ratio as per specifications with

grouting pump at a pressure @ 1.5 to 3.5 Kg/cm2 or

as instructed by EIC etc complete. After grouting is

completed after 24 hours, cut the nipples and seal

it with polymer-modified mortor as per specifications

NS given above. Approximate No. of Nozzles Considering

600 x 600 mm grid on RCC members and 150 mm

C/C along the crack. The rate excluding scaffolding/

working platform/safety nets etc. which are required.

Digitally signed by SHUBHAM

S.No. DSR 2023 Description of items Unit Quantity

DSR NS DSR 2023 NS

Micro fine cement –1050 Kg 525.00 190.00 99,750.00

5 EXTERNAL CRACKFILLING

Damaged Concrete Cracks

Open the cracks into „V‟ groove using proper

mechanical tools. Ensure that the adjoining good cover

is not disturbed and damaged. Clean and moisten the

groove. Providing and applying Epoxy + silica sand 1:2

proportion mortar of MYK Arment Rearm Epoxy USM &

equivalent. In the groove and finish at all heights, level

NS and surface etc. complete. After 24 hours inspected RMT 100.00 650.00 65,000.00

and if required provide another leveling course over the

same. The rate to exclude for erecting necessary

scaffolding, etc. all complete as per the satisfaction of

the EIC The rate excluding scaffolding/ working

platform/safety nets etc. which are required.

6 PROVIDING AND FIXING CHEMICAL REBARS

Providing and fixing chemical rebars shear connectors

as per drawing and at all heights as per EIC. using

NS epoxy grout made with Epoxy resin and silica filler of

MYK Arment ArmGrout HF 66 & equivalent (Hilti or

Klimas or Wurth)

Digitally signed by SHUBHAM

S.No. DSR 2023 Description of items Unit Quantity

DSR NS DSR 2023 NS

For Jacketing of R.C.C. members as per

specifications. The rate excluding scaffolding/ working

platform/safety nets etc. which are required.

7 CLEANING OF EXISTING REINFORCEMENT

Cleaning of existing reinforcement with wire brush and

applying rust convertor of MYK Arment Rearm Rust C

& equivalent before doing micro concrete repair and

polymer repair to damage concrete of R.C.C. members

along with bond coat. The rate excluding scaffolding/

working platform/safety nets etc. which are required.

8 NEW REINFORCEMENT

Providing and fixing new reinforcement in position mild

/ tor steel reinforcement wherever required The rate to

include for cutting, hooking, cranking, placing in

position and binding with 18 SWG wire, complete. The

rate to also include cost of binding wire, which will not

be measured. The reinforcement welded with existing

NS reinforcement up to lap length as per existing diameter M.T. 7.00 86,000.00 6,02,000.00

of reinforcement. The existing bar must be clean as per

specification.After cleaning all the reinforcement should

be coated with MYK Arment FloArm Zinc ZP &

equivalent. The rate excluding scaffolding/ working

platform/safety nets etc. which are required.

9 CONCRETE – JACKETING WORK (Conventional Mi

Digitally signed by SHUBHAM

S.No. DSR 2023 Description of items Unit Quantity

DSR NS DSR 2023 NS

Providing and Casting M 35 Conventional Micro

Concrete with super plasticizers (FOSROC, BASF or

equivalent) for jacketing, for treatment to the damaged

RCC members. The rate shall include for providing and

applying bonding coat by mixing Resin and Hardener in

the ratio 1:0:5, to surface of necessary watertight

shuttering, placing & curing, providing and fixing shear

NS keys as per specification. all complete as per the Cu.m 30.00 24,000.00 7,20,000.00

satisfaction of the EIC. For other structural members

provide necessary and approved pouring inlets. Curing

for –“Concrete” should start within 4 hours of pour and

continue for stipulated time.

10 MICRO CONCRETE

A- Providing and applying 50/100/150 mm. micro

concrete of MYK Arment Rearm Crete MC micro

concrete or equivalent as per specification at all

heights to R.C.C. walls, etc. including centering

NS required for micro concrete pin anchor bolt , anchor M.T. 35.00 86,000.00 30,10,000.00

fastener, including curing etc. complete. (Addition upto

20% of aggregate is permitted as per site condition.)

11 POLYMER REPAIRS TO DAMAGED CONCRETE

Digitally signed by SHUBHAM

S.No. DSR 2023 Description of items Unit Quantity

DSR NS DSR 2023 NS

Removing loose concrete Cleaning the rebars with rust

converter of MYK Arment Rearm Rust C & equivalent.

Cleaning the concrete with compressed air. Applying

two coats of Steel Protective Coating to the rebars of

MYK Arment FloArm Zinc ZP & equivalent. Applying

bond coat of MYK Arment Rearm Bond AR &

equivalent Bonding Agent to the concrete and steel

NS surface. Applying MYK Arment ReArm Crete RMHS & Sq.m 250.00 5,800.00 14,50,000.00

equivalent Polymer modified cement mortar to patch

up the damaged concrete section in planks of 25 mm

thickness. Curing the repaired surface for 3 days The

rate excluding scaffolding/ working platform/safety nets

etc. which are required.

12 Providing and applying old & new epoxy bonding

agent MYK Arment ReArm Bond EBA &

equiavlent to old concrete surface by mixing resin

and hardener in the ratio 1:0:5 or(SBR 1:1 OPC +

MYK Arment Rearm Bond SBR 45 & equivalent as

per recommendation by manufacture. The rate

excluding scaffolding/ working platform/safety nets etc.

which are required.

13 Providing internal cement plaster 12mm thick in a

single coat using Ready to use wall plaster to

concrete or brick surface in all positions excluding

scaffolding and curing complete. b) cement ratio

1:6 With Prior Approval of Concerned Engineer-In-

Digitally signed by SHUBHAM

S.No. DSR 2023 Description of items Unit Quantity

DSR NS DSR 2023 NS

14 Providing external cement plaster in a double coat with

First layer is of 12.5 mm and final layer is of 6mm

thickness using Ready to use wall plaster to concrete

NS or brick surface in all positions excluding scaffolding Sq.m 350.00 1,250.00 4,37,500.00

and curing complete. b) cement ratio 1:4 With Prior

Approval of Concerned Engineer Incharge

15 SCAFFOLDING/WORKING PLATFORM/SAFETY NE

Providing and fixing double scaffolding system (cup

lock type) on the exterior side, up to seven story height

made with 40 mm dia M.S. tube 1.5 m centre to centre,

horizontal & vertical tubes joining with cup & lock

system with M.S. tubes, M.S. tube challies, M.S.

clamps and M.S. staircase system in the scaffolding for

working platform etc. and maintaining it in a

serviceable condition for the required duration as

NS approved and removing it there after. The scaffolding Sq.m 4800.00 740.00 35,52,000.00

system shall be stiffened with bracings, runners,

connection with the building etc wherever required for

inspection of work at required locations with essential

safety features for the workmen etc. complete as per

directions and approval of Engineer-in-charge. The

elevational area of the scaffolding shall be measured

for payment purpose. The payment will be made once

irrespective of duration of scaffolding.

Digitally signed by SHUBHAM

S.No. DSR 2023 Description of items Unit Quantity

DSR NS DSR 2023 NS

16 Providing and fixing Scaffolding net of required width

made of high density Polyethylene UV stabilized knitted

on warp knitting machines having density 100 gram /

sqm and shading coefficient minimum 75% around the

construction site/ for vertical extension as per

requirement including fastening/tying with

NS building/scaffolding pipes or with any other fixtures etc. Sq.m 2400.00 230.00 5,52,000.00

complete as per direction of Engineer-in-Charge. (One

time payment shall be made for providing Scaffolding

net from start of work till completion of work including

shifting if any. The Scaffolding net shall be the property

of the contractor on completion of the work)

GRAND TOTAL AMOUNT (A+B+C) 41,78,440.05 1,38,09,555.65

GRAND TOTAL AMOUNT (A+B+C) 41,78,440.05 1,38,09,555.65

Digitally signed by SHUBHAM

Name of Work: KVIC Office, Annex Building, IRLA Road, Vile Parle (W), Mumbai-400056, Maharashtra

Bill of Quantities (Electrical Works)

S.NO. DESCRIPTION UNIT QUANTITY RATE (Rs) AMOUNT (Rs)

DSR 2022 NS DSR 2022 NS

POINT/ CIRCUIT/ SUBMAIN WIRING

Wiring for light point/fanpoint/exhaust fan point/call bell point

with 1.5 sq.mm. FRLS PVC insulated, copper conductor

single core cable in surface/recessed medium class PVC

conduit with modular switch, modular plate, suitable GI box

and earthing the point with 1.5 sq mm FRLS PVC insulated

copper conductor single core cable etc. as required.

Wiring for group controlled (looped) light point/fan

point/exhaust fan point/ call bell point (without independent

switch etc.) with 1.5 sq. mm FRLS PVC insulated copper

2 conductor single core cable in surface/ recessed PVC conduit,

and earthing the point with 1.5 sq. mm FRLS PVC insulated

copper conductor single core cable etc. as required.

Supplying and fixing one/two module stepped type electronic

fan regulator on the existing modular plate switch box

including connections but excluding modular plate etc. as

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated

copper conductor single core cable in surface/ recessed medium

class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated

copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with the

following sizes of FRLS PVC insulated copper conductor, single core

cable in surface/ recessed medium class PVC conduit as required.

Digitally signed by SHUBHAM

S.NO. DESCRIPTION UNIT QUANTITY RATE (Rs) AMOUNT (Rs)

DSR 2022 NS DSR 2022 NS

b 1.14.4 2x6 sq mm + 1x6 sq mm earth wire - mtr 180 439.00 79,020.00 -

Supply and fixing suitable size GI box with modular plate and

cover on surface or in recess, including providing and fixing 3

6 1.31 pin 5/6 amps modular socket outlet & 5/6 amps modular each 67 477.00 31,959.00 -

switch etc. as required.

Supply and fixing suitable size GI box with modular plate and

cover on surface or in recess, including providing and fixing 6

pin 15/16 amps modular socket outlet & 15/16 amps modular

switch etc. as required.

Supplying & fixing suitable size GI box wih modular plate and

cover in front on surface or in recess including providing and

8 1.57 fixing 25 A modular socket outlet and 25 A modular SP MCB, each 9 727.00 6,543.00 -

"C" curve including connections, painting etc. as

required.(Instant geyser)

DISTRIBUTION SYSTEM

Supplying and fixing following way, three pole and neutral, sheet

steel, MCB distribution board, 415 V, on surface/ recess, complete

9 with tinned copper bus bar, neutral bus bar, earth bar, din bar,

interconnections, powder painted including earthing etc. as required.

(But without MCB/RCCB/Isolator)

Supplying and fixing following rating, four pole, (three phase and

neutral), 415 V, residual current circuit breaker (RCCB), having a

sensitivity current 30 mA in the existing MCB DB complete with

connections, testing and commissioning etc. as required.

Supplying and fixing 5A to 32A rating, 240/415 V, 10 kA, "C" curve,

MCB suitable for inductive load of following poles in the existing

MCB DB complete with connections, testing and commisioning etc

Digitally signed by SHUBHAM

S.NO. DESCRIPTION UNIT QUANTITY RATE (Rs) AMOUNT (Rs)

DSR 2022 NS DSR 2022 NS

Supplying and fixing of following rating MCB/ isolator in existing

distribution board including connections etc, as required.

INTERNAL WIRING & CONDUITING OF LV SERVICES (TV,

TELEPHONE, DATA, CCTV)

Supplying and fixing of following sizes of PVC conduit along with the

accessories in surface/recess including painting in case of surface

13 conduit, or cutting the wall and making good the same in case of

recessed conduit as required. ( For TV, Telephone & DATA)

Supply and fixing following size/modules, GI box alongwith modular

14 base & cover plate for modular switches in recess etc. as required.

1 or 2 module (75mmX75mm) - For TV, Telephone, HDMI & DATA

Supplying and fixing following modular switch/ socket on existing

modular plate and switch box including connectionet. As required.

a 1.24.6 Telephone socket outlet each 15 148.00 2,220.00 -

b MR RJ-45 DATA socket outlet each 14 466.00 - 6,524.00

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the

existing surface/ recessed Steel/ PVC conduit as required.

Supplying and drawing in existing conduits and testing &

commissioning of following multicore PVC insulated PVC sheathed

17 annealed tinned copper conductor 0.5 mm dia telephone wires

conforming to ITD-S/SW-113B including terminal joints complete as

Supplying and installing following size of perforated painted with

powder coating M.S. cable trays with perforation not more than

18 17.5%, in convenient sections, joined with connectors, suspended

from the ceiling with M.S. suspenders including bolts & nuts, painting

suspenders etc as required.

Digitally signed by SHUBHAM

S.NO. DESCRIPTION UNIT QUANTITY RATE (Rs) AMOUNT (Rs)

DSR 2022 NS DSR 2022 NS

a 4.1.1 100 mm width X 50 mm depth X 1.6 mm thickness mtr 100 543.00 54,300.00 -

INSTALLATION OF LIGHTING FIXTURES, CEILING FANS, WALL

FANS, EXHAUST FANS

Installation, testing and commissining of prewired flourescent/

compact flourescent of all type complete with all accessories and

19 1.41 tube etc. directly on ceiling/ wall including connection with 1.5 sq mm each 167 206.00 34,402.00 -

FRLS PVC insulated copper conductor single core cable and

earthing etc. as required.

Installation , testing and commissioning of ceiling fan including wiring

the down rod of standard length (UP TO 30 CM) WITH 1.5 SQMM

20 1.45 FRLS PVC insulated copper conductor, ingle core cable, including Each 64 339.00 21,696.00 -

sproviding and fixing phenolic laminated sheet cover on the fan box

etc. as required.

Installation of exhaust fan upto 450 mm sweep in the existing

opening, including making the hole to suit the size of the above fan,

making good the damage, connection, testing, commissioning etc.

Extra for fixing the louvers/shutters complete with frame for a

exhaust fan of all sizes.

Supplying and fixing 3 pin 5 amp ceiling rose on ceiling junction box

including connection etc. as required

Supply of pre-wired LED fittings of all types, complete with all

accessories and LED tube/lamp, driver etc. as required.

a NS 20 W ceiling/surface mounted LED tubelight Each 155 1,324.00 - 2,05,220.00

b NS 15 W LED wall bracket type fixture Each 12 1,305.00 - 15,660.00

Supply Ceiling fan of 1400 mm,suitable for 230 volts, 50 Hz

25 MR Electrical supply, BEE 5 star labelled ceiling fan complete as Each 64 4,960.00 - 3,17,440.00

required.including providing all accessories ,as required.

Supply & Installation of 400 mm dia wall bracket fan complete

26 MR with all accessories including connections etc. as required. Each 22 5,220.00 - 1,14,840.00

Digitally signed by SHUBHAM

S.NO. DESCRIPTION UNIT QUANTITY RATE (Rs) AMOUNT (Rs)

DSR 2022 NS DSR 2022 NS

Supplying Fresh air cum Exhaust Fan of light duty 250V A.C 50

cycles 300 mm 1400 RPM metallic body, plastic blades, wire mesh

etc. including all necessary accessories compete a required.

Digitally signed by SHUBHAM

NAME OF PROJECT : - NFDCName of Work: KVIC Office, Annex Building, IRLA Road, Vile Parle (W), Mumbai-400056, Maharashtra

BILL OF QUANTITIES (FIRE FIGHTING WORKS)

Item No. Description Unit Qty

DSR 2023 NS DSR 2023 NS

Supplying & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5

kg. capacity cartridge type conform to IS 2878 /15683 complete

erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut

& bolts routed in wall complete.

Supplying and erecting ABC powder type fire extinguisher as per IS :

2 NS 13849 /15683 of 6 kg capacity with necessary clamp for erection on Each 10.00 6,562.50 65,625.00

Providing Round bottom fire bucket of 9 Litres capacity as per IS

:2546 made out of 24 gauge G.I. sheet with extra handle at bottom duly

painted white inside and red outside with FIRE Mark, on provided

stand/ wall hook complete

TOTAL OF FIRE FIGHTING SYSTEM 2,46,628.00

Name of Work: KVIC Office, Annex Building, IRLA Road, Vile Parle (W), Mumbai-400056, Maharashtra

BILL OF QUANTITIES (PLUMBING WORKS)

Item No. Description Unit Quantity

DSR NS DSR NS

1 Water Supply (Internal)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability

for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the

pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step

1.1 18.8 CPVC solvent cement and the cost of cutting chases and making good the same including

testing of joints complete as per direction of Engineer in Charge. Concealed work, including

cutting chases and making good the walls etc. (DSR 2023 18.8)

18.8.1 15 mm nominal dia Pipes Metre 20.00 497.80 9,956.00

18.8.2 20 mm nominal dia Pipes Metre 20.00 537.60 10,752.00

18.8.3 25 mm nominal dia Pipes Metre 15.00 627.25 9,408.75

18.8.4 32 mm nominal dia Pipes Metre 20.00 739.30 14,786.00

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having

thermal stability for hot & cold water supply and all CPVC plain & brass

threaded fittings, including fixing the pipe with clamps at 1.00 m spacing.

This includes jointing of pipes & fittings with one step CPVC solvent

cement and testing of joints complete as per direction of Engineer in

Charge.Internal work - Exposed on wall. (DSR 2023 18.7)

18.7.1 15 mm nominal dia Pipes Metre 20.00 286.80 5,736.00

18.7.2 20 mm nominal dia Pipes Metre 20.00 335.00 6,700.00

18.7.3 25 mm nominal dia Pipes Metre 20.00 401.55 8,031.00

18.7.4 32 mm nominal dia Pipes Metre 20.00 518.75 10,375.00

Providing and fixing G.I. pipes complete with G.I. fittings and clamps,

including cutting and making good the walls etc. (DSR 2023 18.10)

18.10.4 32 mm dia nominal bore Metre 20.00 667.00 13,340.00

18.10.5 40 mm dia nominal bore Metre 10.00 811.90 8,119.00

Digitally signed by SHUBHAM

Item No. Description Unit Quantity

DSR NS DSR NS

Providing and fixing ball valve (brass) of approved quality, High or low

pressure, with plastic floats complete : (DSR 2023 18.18)

18.18.1 15 mm nominal dia Pipes Metre 10.00 406.85 4,068.50

18.18.2 20 mm nominal dia Pipes Metre 10.00 462.50 4,625.00

18.18.3 25 mm nominal dia Pipes Metre 10.00 464.05 4,640.50

NS 32 mm nominal dia Pipes Metre 10.00 1,121.40 - 11,214.00

Providing and placing on terrace (at all floor levels) polyethylene water

storage tank, IS : 12701 marked, with cover and suitable locking

1.5 18.48 arrangement and making necessary holes for inlet, outlet and overflow per litre 4,000.00 11.00 44,000.00

pipes but without fittings and the base support for tank. Including interlinking of both tank

and base (DSR 2023 18.48)

Providing & fixing HI/LO level indicator cum controller with necssary sensor probes including Nos.

wires,conduits and associated accessorie as required. 10,000.00

Disinfecting G.I. water mains of entire work by flushing with water containing bleaching powder at 0.5

gm per litre of water and cleaning the same with fresh water, operation to be repeated three times

including getting the samples of water from the disinfected main tested in the municipal laboratory.

2 Internal Drainage

Supply, Fabrication, Installation, Testing, Balancing and Commissioning in position Low

noise Silent SWR Poly Vinyl Chloride (PVC) class B 6Kg/Cm² pipes as per IS 13592 and IS

14735, shud be sustain for 13 dB at 2 lps as per EN 14366 with an integral groove to hold the

rubber gasket, having thermal stability to take care thermal expansion/contraction & Special

2.1 NS brackets to dampen vibrations, including all SWR PVC plain & modulded fittings, including

concealing the pipes in walls or under floors, including making chases in the walls, fixing

vertically against walls by specially made with Hi-tech clamp with EPDM (FLAT) rubber, Z

bracket 5mm thick at every 2m c/c. making good the same, includes jointing of pipes &

fittings etc. complete as per direction of Engineer in Charge. (For Internal Toilet)

Digitally signed by SHUBHAM

Item No. Description Unit Quantity

DSR NS DSR NS

Providing, fixing, testing and commissioning of SWR-PVC class B Multifloor Trap with 50mm

water seal with 80 mm nominal bore outlet, conforming to IS : IS: 14735 , required 3 no. of

2.3 NS inlet connections for 32/40mm dia waste drains, including setting with cement concrete Nos. 5.00 390.00 1,950.00

1:2:4 (1 cement : 2 coarse sand : 4 hard stone ballast 20 mm nominal size) including cost of

cutting and making good the walls & floors wherever required.

Supply, Fabrication, Installation, Testing, Balancing and Commissioningg in position SWR-

PVC class B Nahani trap with 50mm water seal with 80 mm nominal bore outlet, conforming

to IS : IS: 14735 , cutting chase / hole in floor / slabs and bringing the same in proper

2.4 NS condition and shape after placing the trap in right position complete as required. Trap shall Nos. 10.00 375.00 3,750.00

include 125/100 mm dia C.P. brass heavy duty grating with frame of approved design

including setting in floor with cement motor to match with floor finish as per Architect’s

Supply, Fabrication, Installation, Testing, Balancing and Commissioningg in position SWR-

PVC class B Cleanout Plug with 50mm water seal with 80 mm nominal bore outlet,

conforming to IS : IS: 14735 , cutting chase / hole in floor / slabs and bringing the same in

2.5 NS proper condition and shape after placing the trap in right position complete as required.

Trap shall include 125/100 mm dia C.P. brass heavy duty grating with frame of approved

design including setting in floor with cement motor to match with floor finish as per

Architect’s requirement.

Digitally signed by SHUBHAM

Item No. Description Unit Quantity

DSR NS DSR NS

Supply, Fabrication, Installation, Testing, Balancing and Commissioningg in position SWR-

PVC P Trap with 50mm water seal with 80 mm nominal bore outlet, conforming to IS : IS:

14735 , cutting chase / hole in floor / slabs and bringing the same in proper condition and

2.6 NS shape after placing the trap in right position complete as required. Trap shall include Nos. 5.00 375.00 1,875.00

125/100 mm dia C.P. brass heavy duty grating with frame of approved design including

setting in floor with cement motor to match with floor finish as per Architect’s requirement.

Supply, Fabrication, Installation, Testing, Balancing and Commissioning straight/offset type

flexible single body push fit type WC Pan Connector with factory supplied seal guard with

integrated single mould sealing fins made of flexible EVA Body, including bush/adaptor for

use with CI Pipe as supplied with Pan Connector (For European water closet).

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1

cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet

2.8 18.48 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) Nos. 2.00 298.25 596.50

and a coat of neat cement, rounding the edges and making and finishing the outlet

complete. (DSR 2023 12.22)

Providing and fixing C.I Grating for Rain water pipes & balcony pipes fixed in cement mortar

1:2 to coarse sand.

3 Sanitary Fixtures

NOTE: Sanitary fixtures and C. P. fittings will be supplied by the owners. However all

other piping accessories and consumables required for fixing and connecting of these

fixtures, such as brass screws, M. S. screws, teflon tapes, hodfasts are to be provided by

Contractor at no extra costs.

(If sanitary fixture will be provided by the owner then other item will be provided by the

contractor with no extra cost )

Digitally signed by SHUBHAM

Item No. Description Unit Quantity

DSR NS DSR NS

Providing and fixing white vitreous china extended wall mounting water closet of size

780x370x690 mm of approved shape including providing & fixing white PVC cistern with dual

flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover,

and cistern fittings, nuts, bolts and gasket etc complete. (DSR 2023 17.78)

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S.

3.1.2 17.16A triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - Nos. 2.00 349.15 698.30

charge (DSR 2023 17.16A)

Fixing, jointing, and testing in position approved make 15mm dia. C.P. Bib cock / Pillar cock

with areator consisting of the following including making water connections.

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved

quality conforming to IS:8931 (DSR 2023 18.53)

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112

3.4 17.71 mm distance from wall of standard shape with bracket of the same materials with snap Nos. 2.00 168.35 336.70

fittings of approved quality and colour, weighing not less than 105 gms.(DSR 2023 17.71)

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar

3.5 17.7A taps, 32 mm C.P. brass waste of standard pattern, including painting of

fittings and brackets, cutting and making good the walls wherever require:(DSR 2023 17.7A)

(a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole

Providing and fixing CP Brass 32 mm size Bottle Trap of approved quality & make and as per

the direction of Engineer-in-charge.(DSR 2023 17.72A)

Digitally signed by SHUBHAM

Item No. Description Unit Quantity

DSR NS DSR NS

Providing and fixing white vitreous china flat back or wall corner type lipped front

urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic

3.7 17.4 flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I

clamps complete, including painting of fittings and brackets, cutting and making good the

walls and floors wherever required : (DSR 2023 17.4)

Range of two urinal basins with 5 litre white P.V.C. automatic

flushing cistern

3.8 17.34 Providing and fixing toilet paper holder : (DSR 2023 17.3)

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I.

3.9 17.10 brackets and stainless steel plug 40 mm, including painting of fittings and brackets,

cutting and making good the walls wherever required : (DSR 2023 17.10)

Stainless steel single sink with single drain board

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing

not less than 690 gms. (DSR 2023 18.51) 798.95

Supply and fixing 10 mm thick froasted toughened glass wih edges polished cut to required profile as per

drawings for urinal partitions of overall size 1200 mm x 400 mm with frosted glass film as approved and fixed to

wall using SS glass connectors for wall to glass Supply,fixing of required angle and of approved make, including

cutting holes in glass, silicon sealant etc. all complete.

Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality

and colour. (DSR 2023 18.74)

18.74.2 15 mm nominal bore with 45 cm length Nos. 8.00 121.9 975.20

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm

3.13 17.31 thick hard board ground fixed to wooden cleats with C.P. brass screws and washerscomplete.(DSR 2023 18.31) Nos. 2.00 1607.95 3,215.90

Digitally signed by SHUBHAM

Item No. Description Unit Quantity

DSR NS DSR NS

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37

3.14 17.72 mm from wall face with concealed fittings arrangement of approved quality and colour,weighing not less than 88 Nos. 2.00 231.95 463.90

Digitally signed by SHUBHAM