EXTENSION OF COMMUNITY HEALTH CENTRE OPP. R.T. SCHOOL, VASTRAL, EAST ZONE, AHMEDABAD.

PRICE BID - BILL OF QUANTITIES (B.O.Q.)

Name of Work : TENDER DOCUMENT FOR EXTENSION OF

COMMUNITY HEALTH CENTRE OPP. R.T. SCHOOL,

VASTRAL, EAST ZONE, AHMEDABAD.

Name of Contractor : M/s. __________________________

Correspondence Address :

Tender Amount : Rs.

(Rs. Six Crores Thirty Lacs Fifty Five Thousand One Hundred and Thirty Three and Twenty Eight Paisa

Contractor’s Quoted Rate: -

Seal and Signature of the Bidder Additional City Engineer (East Zone)

Date: Ahmedabad Municipal Corporation

PLEASE NOTE : PLEASE DO NOT FILL PRICE BID IN HARD COPY.

Tender Document “Extension of Community Health Centre in Vastral Ward, East Zone, Ahmedabad” PRICE BID Page

EXTENSION OF COMMUNITY HEALTH CENTRE OPP. R.T. SCHOOL, VASTRAL,

EAST ZONE, AHMEDABAD.

SR. NO. ITEM DESCRIPTION AMOUNT

A CIVIL WORKS 4,65,58,800 =56

B PERCOLATING WELL 3,99,106=82

C LANDSCAPE 8,13,500=00

D PERCOLATING WELL 9,28,377=00

E ELECTRIFICATION WORKS 1,14,63,144=35

FIRE DETECTION, ALARM AND HYDRANT WORKS 28,92,205=55

(Rs. Six Crores Thirty Lacs Fifty Five Thousand One Hundred Thirty-Three and Twenty-Eight Paisa

Seal and Signature of the Bidder Additional City Engineer (East Zone)

Date: Ahmedabad Municipal Corporation

Tender Document “Extension of Community Health Centre in Vastral Ward, East Zone, Ahmedabad” PRICE BID Page

EXTENSION OF COMMUNITY HEALTH CENTRE OPP. R.T. SCHOOL,

VASTRAL, EAST ZONE, AHMEDABAD.

S.No Item Tot. Qty. Unit Rate Amount

Brick Masonary Demolition : Demolition and

disposal of unserviceable materials with all

leads and lifts for plastered Brick masonary.

Rate also includes necessary tools,

scaffoldings and all safety measures required

for the same, including all leads and lifts.

RCC Demolition : Demolition and disposal of

unserviceable materials with all leads and

lifts for plastered RCC work.Rate also

includes necessary tools, scaffoldings and all

safety measures required for the same,

including all leads and lifts. This includes

cutting of reinforcement steel and shifting it

to ground from any height and level.

Dismantling Old Plaster: Removing and

scraping of old deteriorated plaster of any

3 thickness from Wall / RCC member including 925.00 Smt. 19.38

stacking of unserviceable material from site

of work with all leads and lifts.

Dismantling Flooring : Dimantling tiled or

stone floors or tiles laid in mortar including

4 stacking of serviceable materials and 1515.00 Smt. 47.25

disposal of unserviceable materials including

all leads and lifts.

Dismantling Doors etc. : Dismantling any

type (aluminum/ wooden etc.) doors,

windows , ventilators etc. (wood / aluminum

5 or steel grills) shutters including chowkhats,

architraves, holdfasts and other attachment

etc. complete and stackign the materials with

all lead and lift.

a) Not exceeding 3 Smt. In area 15.00 Nos. 185.85

Dismantling Pipes: Dismantling G.I. , PVC, C.I.

pipes, GSW pipes and A.C. rain water pipes

6 with fittings and clamps including stackign 500.00 Rmt. 74.03

the materials with all lead and lift (For any

diameter of pipe, from wall and floors etc.).

Dismantling Sanitary Fittings : Dismantling

sanitary fitting like wash basin, WC pan

7 indian and europena type , flusing tank etc. 10.00 Nos. 401.63

including stacking the materials with all lead

and lift etc. complete.

Dismantling Fabrication works : Dismantling

8 steel work including dismembering and 2000.00 Kgs. 3.63

stacking the materials with all lead and lift.

Tender Document “Extension of Community Health Centre in Vastral Ward, East Zone, Ahmedabad” PRICE BID Page

This includes removal polycarbonate sheet

with proper safety and system.

Dismentaling of sheet roofing including

ridges, Hips, Valleys, Gutters etc. stacking of

serviceable materials and disposal of

unserviceable materials with all lead and lift.

Labour work for fixing Interlocking Blocks /

any kind of pavement on up to 50 mm thick

10 sand bedding, levelling, watering and fixing 500.00 Smt. 68.64

in line & level as well cleaning the site

etc.comp. as directed.

Excavation Upto 1.50 Mt.: Excavation for

foundation upto 1.50 Mt depth including

11 sorting out and stacking useful materials and 200.00 Cmt. 115.92

disposing off the excavated stuff upto

Meters lead (B) Dense or hard soil.

Excavation From 1.50 Mt. to

Mt.:Excavation for foundation 1.50 Mt to

Mt. depth including sorting out and stacking

useful materials and disposing off the

excavated stuff upto 50 Meters lead (B)

Dense or hard soil.

Excavation for foundation 3.0 Mt. to

Mts.: Excavation for foundation 3.0 Mt. to

5.00 Mts. depth including sorting out and

stacking useful materials and disposing off

the excavated stuff upto 50 Meters lead (B)

Dense or hard soil.

Excavation for additional depth more than

5.00 Mts:Excavation for additional depth

more than 5.00 Mts. For excavation for

14 foundation including sorting out and 50.00 Cmt. 162.02

stacking useful materials and disposing off

the excavated stuff upto 50 mt. Lead. (B)

Dense or Hard Soil.

Add extra for Disposing off the excavated

15 stuff of above items for lead of (A) 50 m to 100.00 Cmt. 17.28

Add extra for Disposing off the excavated

16 stuff of above items for lead of (B) 100 m to 100.00 Cmt. 34.56

Providing and installing cast in situ single

under reamed piles of specified diameter and

length below pile cap, excluding the cost of

Concrete, steel reinforcement but including

the cost of boring with bentonite solution

and the length of the pile to be embedded in

pile cap etc. all complete.Reinforcement shall

be measured seprately and be paid extra.

(Length of pile for payment shall be

measured upto to the bottom of pile cap) :

(a) 400 mm dia. Piles 5.00 Rmt. 638.83

(b) 450 mm dia. Piles 5.00 Rmt. 705.03

Extra over single under ream for providing

additional bulbs in under reamed piles,

18 under specified diameter excluding the cost

of Concrete, steel reinforcement (only the

nos. of extra bulbs are to be paid).

(a) 400 mm dia. Piles 5.00 Nos. 813.05

Tender Document “Extension of Community Health Centre in Vastral Ward, East Zone, Ahmedabad” PRICE BID Page

(b) 450 mm dia. Piles 5.00 Nos. 1103.43

Filling available excavated earth: Filling

available excavated earth (excluding rock) in

trenches, plinth, sides of foundations etc. in

19 layers not exceeding 20 cm. in depth, 100.00 Cmt. 129.10

consolidating and compacting each

deposited layer by ramming and watering

Filling Murrum : Filling in foundation and

plinth with murrum or selected soil in layers

of 20 cm. thickness including watering,

ramming and consolidating etc. complete.

Sand filling: Sand filling with sand as

approved by Architect in plinth / under floor

/ else where including watering, ramming,

21 consolidating and dressing to the required 10.00 Cmt. 455.63

grades and levels as directed by Engineer-in

charge. Proper care shall be taken for sieving

the sand before use.

Lightweight filling :Filling in Sunken Portion

with good Quality Aerated light weight

concrete block having crushing strength not

less than 35 kg/sqcm and where directed by

the Architect / Engineer-in-charge, in sunk in

layer. including watering, ramming where it

is required etc. complete, as directed by the

Architect / Engineer-in-charge .

Anti-Termite Treatment : Carring out plinth

treat ment to post construction/ existing

structure by spraying chemical solution for

termite control treatment including labour

and material consist ment withI.S.I

specification. Using Chlordene and Chiorpur

files 20EC. As Per 6131_ paret- II

Consentration Weight one percent is

recommended i.e one litre 20EC chemical

emulsion with19 liter give1% concrentration

inclusive of one litre chemical emulsion

appication at the rate of 5 Litre chemical/

Sqm of surface is recommended as per I.S

Conveyance: Conveyance charges of earth,

lime, murrum, building rubbish, manure,

24 garbage, sludge, excavated rock, fly ash,

aggregate of any kind etc. complete. No dry

factor for this item shall be calculated.

(a) Conveyance charges upto 1 km 500.00 Cmt. 46.63

(b) Conveyance charges upto 2 km 100.00 Cmt. 60.69

(c) Conveyance charges upto 5 km 100.00 Cmt. 100.44

(d) Conveyance charges upto 6 km 100.00 Cmt. 109.70

(e) Conveyance charges upto 7 km 100.00 Cmt. 118.96

(f) Conveyance charges Above 7 km 100.00 Cmt. 128.22

BBCC in 1:4:8: Providing and laying cement

concrete 1:4:8 (1-

Cement : 4- Coarse sand : 8- Graded Brick

bats aggregate 40mm normal size) and

curing complete excluding cost of formwork

in (A) Foundation,plinth and terrace level.

Tender Document “Extension of Community Health Centre in Vastral Ward, East Zone, Ahmedabad” PRICE BID Page

PCC in 1:4:8: Providing and laying cement

concrete 1:4:8 (1- Cement : 4 - Coarse

aggregate : 8-Hand broken stone aggregates

40 mm nominal size) and curing complete

excluding formwork in (A)Foundation,plinth

and terrace level.

PCC in 1:3:6: Providing and laying cement

concrete 1:3:6 (1- Cement : 3 - Coarse

aggregate : 6-Hand broken stone aggregates

40 mm nominal size) and curing complete

excluding formwork in (A) Foundation and

RCC M-150: Providing and laying controlled

cement concrete M-150 for curing complete

excluding cost of formwork and

28 reinforcement for reinforced concrete work 95.00 Cmt. 4129.42

in (C) Slabs, landing, shelves, balconies,

lintels, beams, girders and cantilever at any

level and height.

RCC M-200 : Providing and laying controlled

cement concrete M-200 for curing complete

29 excluding cost of formwork and

reinforcement for reinforced concrete work

(A) Foundations, footings, base of columns,

and mass concrete.

(B) Walls at any level and height. 2.00 Cmt. 4484.17

(C) Slabs, landing, shelves,

Balconies,Weather sheds, lintels,beams,

girders, and cantilevers, at any level and

(D) Columns, pillars, posts, and struts, at any

level and height.

(E) Staircase at any level and height. 20.00 Cmt. 5418.91

(K) Vertical and horizontal fins at any level

RCC M-250 : Providing and laying controlled

cement concrete M-250 for curing complete

30 excluding cost of formwork and

reinforcement for reinforced concrete work

(A) Foundations, footings, base of columns,

and mass concrete.

(B) Walls from at any level and height. 71.00 Cmt. 4519.88

(C) Slabs, landing, shelves,

Balconies,Weather sheds, lintels,beams,

girders, and cantilevers, at any level and

(D) Columns, pillars, posts, and struts, at any

level and height.

Reinforcement : Providing T.M.T Fe 500D bar

reinforcement for R.C.C. work including

bending, binding and placing in position

complete up to any floor level

Formwork : Providing Formwork of ordinary

timber planking so as to give a rough finish

including centering, shuttering, strutting and

proping etc. Height of propping and

centering below supporting floor to ceiling

not exceeding 4 Mt. and removal of the same

Tender Document “Extension of Community Health Centre in Vastral Ward, East Zone, Ahmedabad” PRICE BID Page

for in -situ reinforced concrete and plain

concrete work in

(A) Foundations footings, bases of columns

etc. and mass concrete.

(B) Flat surfaces such as soffits of slabs,

landings and like(1) Floor etc. upto 200 mm 2675.00 Smt. 252.00

(C) Vertical faces such as walls (any

thickness and at any height) for lift and other 675.00 Smt. 229.95

(G) Columns,pillars, posts and struts (1)

Square, rectangular, polygonal in plan ( For 875.00 Smt. 297.68

"L" Plates only).

(H) Columns,pillars, posts and struts (2)

Circular or curved in plan.

(I) Sides and soffits of beam, haunchings

cantilevers, girders, bracings,and lintels not 2000.00 Smt. 192.15

exceeding 1.0 Mts. in depth.

(L) Chullah, hoods, weather sheds, chhajjas,

corbels, etc. including edges.

(M) Staircases with slopping or stepped

soffits including risers & Strings excluding 220.00 Smt. 242.55

For More Height:For height of propping and

centering where the height of propping and

centering exceeds normal height between

two ceiling including temporary brick or

stone pillars for supporting as required.

(i)Height from 4.00 to 5.0 Mt.

For More Height:For height of propping and

centering where the height of propping and

centering exceeds 4.0 Mts. between

34 supporting floor two ceiling including 50.00 Smt. 682.01

temporary brick or stone pillars for

supporting as required. (ii)Height more than

5.0 Mt and upto 6.0 Mt.

Rebarring:Drilling suitable holes in

reinforced or plain cement concrete with

power driven drill machine to a minimum

depth of 80mm upto 250mm in RCC beams,

lintels, columns and slabs to introduce steel

35 bars for sunshades/balconies including

fixing the steel bars in position using Hilti

Chemical HY200-R or Fischer - FIS 360 or

equivalent but excluding the cost of

reinforcement, all complete as per direction

of Engineer-In-Charge.

(a) 8 mm Dia in 80 mm Deep & 12 mm Dia

(b)10 mm Dia in 100 mm Deep & 14 mm Dia

(c)12 mm Dia in 120 mm Deep & 16 mm Dia

(d)16 mm Dia in 160 mm Deep & 20 mm Dia

(e)20 mm Dia in 200 mm Deep & 25 mm Dia

(f)25 mm Dia in 250 mm Deep & 32 mm Dia

Tender Document “Extension of Community Health Centre in Vastral Ward, East Zone, Ahmedabad” PRICE BID Page

Tremix: Providing & Applying Tremix

method (Vaccum de extracted & Powered

trowelled ) for Concrete Flooring with

36 necessary finishing either smooth or wire 1700.00 Smt. 54.00

finish as approved by consultants. Rate shall

includes the rate of side shuttering with

channel , rails to form panels etc. complete.

Making 15 mm Groove in R.C.C work on road

and filling it with poly sulfied selant and

finished it good incl. all labour charges etc.

comp. as directed

Providing and laying and fixing 25 mm thick

expansion joint by hydrocell semi rigid UV

38 resistance with high performance laminated 100.00 Smt. 738.13

closed cell polythene foam joint filler in sheet

foam as directed, etc. complete.

Brickwork in Foundation:Brickwork using

common burnt clay building bricks having

crushing strength not less than 35 kg/Sq. cm.

in foundations and plinth in cement mortar

1:6 (1 cement :6 fine sand) for conventional

Brickwork in Super Structure:Brick work

using common burnt clay building bricks

having crushing strength not less than

kg/Sq. cm. in cement mortar 1:6 (1 cement

:6 fine sand) for superstructure upto floor

three level height. For conventional type

bricks. (a) For Superstructure above plinth

level upto floor two level (B) Conventional.

Brickwork in Super Structure:Brick work in

41 super structure above floor two level in 415.00 Cmt. 4293.55

superstructure (B) Conventional.

Half Brick masonary: Half Brick masonary in

common burnt clay building bricks having

crushing strength not less than 35 Kg/Sq. Cm

42 in Cement Mortar 1:4 (1-Cement : 4- Coarse 485.00 Smt. 646.70

Sand) in superstructure above plinth level

for any level and height. (B) Conventional

Fabrication works:Providing, supplying,

fabricating and erecting in position the

structural steel for colums, grill, bars, truss,

purlins, runners, cleats, insert plate, base

plate etc for all structural elements as per

detail, made up from closed structural steel

hollow sections (RHS/SHS including rolled

section) as per IS 4923 of grade Yst 310 mpa

- weather resistant sections or an approved

equivalent as per details /

drawings/instructions including cutting,

bending, jointing, connecting, welding and /

bolting and / riveting and fabricating and

erecting in position etc complete for all levels

as directed. The rate to include all necessary

fixtures, fastening including welding rods of

standard approvded quality etc for complete

the job. The rate shall also include one coat of

an anti-corrosive paint.& necessary

scaffolding etc. complete as directed.

Tender Document “Extension of Community Health Centre in Vastral Ward, East Zone, Ahmedabad” PRICE BID Page

Providing and fixing in position collapsible

steel shutters with vertical channels 20 x

x 2 mm braced with flat iron diagonals 20 x

mm size with top & bottom rails of T- iron

x 40 x 6 mm with 38 mm dia. Steel pulleys

complete with bolts , nuts , locking

arrangement , stoppers , handles including

applying a priming coat of red lead paint.

Providing, Fabricating and Erecting in

position Partly Panelled Partly Glazed / Fully

Panelled / Fully Glazed anodised (15 to

micron of desired colour) Single Shutter,

Double Shutter, Double door shutter (double

action opening) of standard aluminum

section from 18 mm (3/4”) series of Jindal,

Hindalco, Domel or approved equivalent

make of size as described below or of better

/ higher series if required as per site

condition-top and vertical style 47.62 x

x 2mm (Wt. approx = 1.05 kg./m), lock rail

and bottom section 114.30 x 44.45 x 2 mm (

Wt. approx = 1.83 kg/m), fitted on frame of

size 101.60 x 44.45 x 2 mm ( wt. app =

kg./m) with standard accesories like handle

stopper, locking arrangement, C.P. brass

hinges, etc, and glazing of 5 mm thick float

glass of approved brand, fixed with rubber /

PVC beading in upper / Lower and 12 MM

both side pre laminated sheet fixed with

Glazing clips in Upper / lower panel etc.

complete as per architecture detail given by

the consultants. The same item can be

operated for fixed partitions as and when

needed. All Accessories like aldropt, stopper,

door stop, door magnet and hinges shall be of

Stainless Steel Heavy Duty.

Providing and fixing double action hydraulic

floor spring of approved brand and

manufacture conforming to IS : 6315, having

brand logo embossed on the body / plate

with double spring mechanism and door

weight upto 125 kg, for doors, including cost

of cutting floors, embedding in floors as

required and making good the same

matching to the existing floor finishing and

cover plates with brass pivot and single piece

M.S. sheet outer box with slide plate etc.

complete as per the direction of Engineer-in-

charge. With stainless steel

cover plate minimum 1.25 mm thickness.

Approved Brands : Godrej / Everite or

approved equivalent as directed.

Providing & Fixing Alumnium Doors shutters

using Heavy Aluminum anodised section of

Size 85 mm x 45 mm and respective heavy

frame. Rates also includes Providing and

47 fixing 4 heavy Hinges, 1 Lock, 2 American 130.00 Smt. 4950.00

handles (8" size), 4 mm thick Ginja/ or

approved pattern glass, and 5 mm thick

Compact Sheet (of approved pattern) Upto

Lock Rail height, also includes providing

Tender Document “Extension of Community Health Centre in Vastral Ward, East Zone, Ahmedabad” PRICE BID Page

wooden log in top rail for fixing Door Closer.

The wooden log shall be of size to fit into the

frame but 900 mm in length. Half Particle

Board (12 mm thick both side prelaminated)

and Half Glased Doors and / or Full size

Particle Board Doors same rates shall be

Providing and fixing window having

extruded aluminum Colour Powder Coated

section frame main outer size 95mm x 24mm

x 1.17mm @ wt.of 0.738 Kg/mt, horizontal

Two / Three track member size 92mm x

vertical member of size 92mm x 31.75mm x

1.50mm ,@ Wt. 1.06 Kg/mt with sliding

shutters of horizontal member size

mmx18mm x1.29mm @ wt.of 0.456 Kg/mt,

vertical member of size 40mm x 18mm x

mm @ wt.of 0.456Kg/mt with 5 mm thick

transparent bronze colour tinted float glass

with powder coated aluminum fittings and

fixtures and transparent silicon sealant glass

fixing to frame as per details etc. complete.

Providing and fixing standared extruded of

alluminium section of size 63.50 x 38.10 x

1.95 mm @ Wt 1.094Kg / Rmt with colour

Powder Coated alluminium frame with 5 mm

thick transparent bronze colour tinted float

glass with colour anodized alluminium frame

for ventilation with 5 mm thick frosted glass

as details etc complete.

Providing and fixing 32 mm thick water

proof flush doors, rate also includes 12 x

cms Indian teak wood (pure saag) frame and

including fixing of 1.00 mm thick laminate

sheets (Door Skin) on both sides of the doors

, border pattis of C.P. Saag on thickness of the

doors on all four sides, polishing the same

and fixtures fasteners complete as directed.

The rates shall be inclusive of Melamine

polish on all exposed surfaces as per sample

approved by the Consultants, Hardware

Includes 4 nos. heavy chrom plated Hinges,

S.S. Tower bolt (10"), Aldropt Set (10")

Taadi (10"), Door Stop / Door Magnet etc

complete as directed by the Consultants.

Providing and fixing of approved make

radiation-proof lead line door with

galvanised steel. Recommended lead door

design should be a sandwich-type panel with

both sides GI Sheet with a minimum 2mm

Lead infill. Doors should be finished in

Powder Coating with thickness of 60 microns

approx. in desired Shades. The manufacturer

company must be ISO 9001- 2015 certified.

The door frame is a Single rebate profile of

minimum size 105mm X 57 mm made out of

1.2 mm minimum thick galvanized steel

sheet & with 2mm lead infill. The frame is

finished with Powder Coating in desired

Tender Document “Extension of Community Health Centre in Vastral Ward, East Zone, Ahmedabad” PRICE BID Page

Shade. Frame having provisions and

necessary Arrangement for receiving

appropriate hardware like lock and hinges.

The door leaf shall be a minimum 46mm

thick fully flush double skin door without

vision lite. The door leaf shall be

manufactured from 1.0 mm thick galvanised

steel sheet. Door Includes SS 304 Hinges, D

type Pull Handle-SS 304, Mortise Deadlock

with cylinder - 70mm both side key , Flush

type tower bolt, Door Seal , Door Closer etc.

Complete as per Standard

Providing and fixing FRP frame size 100 mm

x 50 mm and 28mm thick FRP depress panel

shutter having extra reinforcement on sides

& edges in Gel coat finish. The core of the

shutter & frame is to be filed up with injected

fire retardant grade polyurethene foam done

in situ alongwith embedded wooden pieces

for stiffening & also taking hinges & fintures.

The whole FRP frame & shutter is to be water

proof weather proof, termite proof &

resistance to mild acid/alkali. Rates are to be

inclusive of S.S hinges with necessary screws

& alluminium fixtures & fastenings &

fastener sleeve.

Providing 15 mm thick cement plaster in

single coat on Rough (Similar) on brick walls

for interior plastering and finished even and

smooth in (ii) Cement Mortar 1: 4 (1 Cement

: 4 Sand). This includes finishing with a

floating coat of neat slurry and doing plaster

after making thaiyaas / levellers and after

approval from engineer in charge.

Providing 15 mm thick cement plaster in

single coat on ceilings and soffits of stairs and

finished even and smooth in (ii) Cement

Mortar 1: 4 (1 Cement : 4 Sand). This includes

finishing with a floating coat of neat slurry

and doing plaster after making thaiyaas /

levellers and after approval from engineer in

Providing 20 mm thick double coat mala /

sandface cement plaster on brick/ concrete

work for plastering comprising of base coat

of 12 mm thick cement plaster in cement

55 mortar (1 Cement : 4 Coarse Sand) in rough 1750.00 Smt. 297.68

finishing and 8 mm thick top coat of cement

mortar 1:2 (1 Cement : 2 Coarse Sand)

finished with trowel including scaffolding

curing etc. complete.

Providing and laying polished Kota stone

slab flooring over 20 mm (Average) thick

base of cement mortar 1:6 (1-cement : 6-

56 coarse sand) or L.M. 1.1.5 laid over and 20.00 Smt. 982.83

jointed with grey cement slurry including

rubbing and polishing etc. complete. (A)

Providing and laying polished kota stone slab

25 mm thick in risers of steps, skirting dedo

Tender Document “Extension of Community Health Centre in Vastral Ward, East Zone, Ahmedabad” PRICE BID Page

and pillars laid on 10 mm thick cement

mortar 1:3 (1 Cement : 3 Coarse sand) and

jointed with gray cement slurry mixed with

pigment to match the shade of slab including

rubbing and polishing etc. complete.

Providing & laying full body, 8 to 10 mm

Vitrified Tiles tiles 800 x 800 mm , 900 x

Nitco/Kajaria/Simpolo/Sunheart/ Asian

Bonzer or equivalent but approved make and

sample approved by architect, approved

colour and shade, any type, in desired

pattern in floor areas with residue, skirting,

pattas as per drawing and specification in

white cement slurry over a minimum 40 mm

thick cement sand mortar (1:6) bedding

screed laid to proper gradient. Rate shall be

inclusive of necessary cutting, joint filling

curing, cleaning with mild oxalic acid etc.

complete for all floors, all levels, all height all

complete as per drawing, specifications,

instruction & directions of the Engineer-in-

charge. The rate should be inclusive of

protection of flooring until the handling of

the project by covering the joints with

abrotaps, plastic sheet or Plaster of paris.

Skirting shall be paid in Square meter.

Payment shall be done as per drawing/laid at

site, The rate shall include cost of fixing

protection sheet and keeping the same intact

untill the handover. Rates also includes

removing the damaged tiles upto the

handover, and removing the protection sheet

at the time of innauguration. Payment shall

be done as per drawing/laid at site. Rates

includes filling 5 mm groove with epoxy

grout of approved shade and brand.

Providing and fixing 6 mm thick approved

quality, colour, design, size and shade matt /

anti skid Ceramic tiles flooring laid over

required bedding (minimum 20 mm

thick)thickness of cement mortar in mix ratio

1:6 (1 cement : 6 sand) in pattern as per the

Project Consultantsural drawing or as

directed by the Project Consultants &

Engineer-in-charge. Tiles fixed to correct

line, level, slopes joints well cleaned, grouted

with matching colour cement paste, cured,

etc. all complete at all height and lead etc.,

complete to entire satisfaction of the Project

Consultants & Engineer-in-charge.Care to be

taken to ensure joints are well grouted,

cleaned and water tight.Any size of tiles may

Providing and fixing coloured glased tiles of

the size 300 mm x 200 mm x 8 mm / 300 mm

x 450 mm x 8 mm / 600 x 300 x 8 mm in walls

skirting, risers of steps and dedo on 10 mm

thick cement plaster in 1:3 (1 Cement :

Tender Document “Extension of Community Health Centre in Vastral Ward, East Zone, Ahmedabad” PRICE BID Page

Coarse sand) & jointed with white cement

slurry with approved shade of colour to

match the tiles.

Providing and fixing Granite stone (For sills,

jambs, dado, skirting etc.) as approved by the

consultants for steps , sill and jambs of

average thickness 18 m.m. Rate includes

necesssary plaster 12 m.m. thickness in C.M.

1:4 and labour required for fixing in good line

and level etc. comp. The hidden side of the

granite shall be made rough by applying

Areldite of Approved glue and sprinkling

coarse sand on top of it. Later after drying

the stone shall be fixed with screws of

enough length so as to fix the stone properly

in to the wall or the supports. Rate also

includes necessary on-site polishing,

rubbing, moulding the visible edges, cleaning

etc. complete as per the consultants

instructions. No extra rates shall be paid for

any item related to this.

Providing and Laying of Rubber Moulded

Paver Block Grey/Coloured 60 mm thick, M-

35 Grade of any size ; shape (Preferrably

Square shape of size 8" x 8" of as approved by

the consultants and AMC) using black trap

good quality aggragate of 20 mm nominal

size for footpath, parking areas, service lanes

and other areas as mentioned in the drawing

/ instruction of engineer in charge. Cost

includes formworks using rubber mould,

Rate providing and laying paver blocks as per

required grading and specification. The

paver block shall be mechanically

compacted. The work of paving blocks shall

be executed in line and level by skill mason of

flooring work only. It should be laid in such a

way that the no cutting of the paver block to

be necessary. if cutting of paver block

necessary then it should be cut by machine

only and carting. The finished surface of the

paver block shall have resonably good, plain

finished. Paver blocks shall be compacted

and shall be relaid if necessary. Gravel or

such type of materials shall not be allowed

for production. Laying on 5 cms thick sand

Providing and fixing pre-cast concrete kerb

stone of gray cement based concrete block

cm length x 30 cm heigh and 15 cms thick of

63 M-250 grade concrete as per approved 1000.00 Rmt. 358.06

design and including excavation for fixing in

proper line and level, filling the joints in C: M

1:3 (1 Cement : 3 Fine sand) etc. complete.

Providing and laying cement concrete

flooring 1:2:4 (1 Cement : 2 Sand : 4 graded

64 stone aggregates 20 mm nominal size) laid in 1300.00 Smt. 348.08

one layer and finished with a floating coat of

neat cement (A) 50 mm thick.

Providing and laying integral cement based

water proofing treatment including

Tender Document “Extension of Community Health Centre in Vastral Ward, East Zone, Ahmedabad” PRICE BID Page

preparation of surface as required for

treatment of roofs, balconies, terraces etc.

consisting of following procedure: (1)

Applying a slurry coat of neat cement using

2.75 kg/sqm of cement admixed with water

proofing compound conforming to IS.

and approved by Engineer-in-charge over

the RCC slab including adjoining walls upto

300 mm height including cleaning the

surface before treatment. (2) Laying brick

bats with mortar using broken bricks/brick

bats 25 mm to 115 mm size with 50% of

cement mortar 1:5 (1 cement : 5 coarse sand)

admixed with water proofing compound

conforming to IS : 2645 and approved by

Engineer-in-charge over 20 mm thick layer

of cement mortar of mix 1:5 (1 cement :5

coarse sand ) admixed with water proofing

compound conforming to IS : 2645 and

approved by Engineer-in- charge to required

slope and treating similarly the adjoining

walls upto 300 mm height including

rounding of junctions of walls and slabs. (3)

After two days of proper curing applying a

second coat of cement slurry using 2.75 kg/

sqm of cement admixed with water proofing

compound conforming to IS : 2645 and

approved by Engineerin- charge. (4)

Finishing the surface with 20 mm thick

jointless cement mortar of mix 1:4 (1 cement

:4 coarse sand) admixed with water proofing

compound conforming to IS : 2645 and

approved by Engineerin- charge (5) The

whole terrace so finished shall be flooded

with water for a minimum period of two

weeks for curing and for final test.“All above

operations to be done in order and as

directed and specified by the Engineer-in-

Charge :and shall be guaranteed for

minimum period of 10 years after handing

over the completed building by the main

contractor to be finished as directed. Official

Guarantee Bond for 10 years on Stamp paper

must be furnished to the client before

receiving any payment.

Providing & laying broken white and/or

coloured glazed china mosaic flooring for

plain and curved surfaces, comprising of

to 20 mm. size broken pieces of glazed tiles,

laid over cement mortar 1:3 bedding, on

plain or sloped surfaces. The flooring shall be

tampered to bring the mortar cream up to

the surface, including rounding of the

junctions and extending them up to 15 cm.

along the parapet wall. The rate shall include

bands, if different colour is used, any

pattern or design as per drawing and

direction, curing, cleaning with water and

oxalic acid, etc. complete. Bands and pattas

shall be paid in Smt. Only.

Tender Document “Extension of Community Health Centre in Vastral Ward, East Zone, Ahmedabad” PRICE BID Page

Granite Stone :

Providing and laying of approved quality

mirror polished 20 mm thick Granite stone (

Any colour ) flooring laid in pattern (as

detailed by the Consultants) bedded over

average 20-25 mm thick cement mortar, mix

ratio 1:6 (1 cement : 6 sand) laid to slopes as

detailed in drawing, including cleaning and

67 preparing the surface for bedding, curing of 50.00 Smt. 2385.71

bedding screed etc. Joint width to be as

specified by the Engineer-in-charge,

including polishing cleaned and grouted with

matching colour cement paste, curing,

cleaning all complete at all heights and leads

to satisfaction and approval of the

Consultants. Care to be taken to ensure joints

are well grouted, cleaned and water tight.

Providing and laying rough chiseled dressed

stone flooring over 20 mm average thick base

of cement morat 1:5 (1 Cement : 5 Coarse

Sand) including pointing with cement mortar

1:2 (1 Cement : 2 Stone dust) etc. complete

(B) 40 mm thick stone.

Decorative Tiles:

Providing and fixing ceramic based elevation

tiles of any size but thickness of 8 mm to

mm at any height and level etc. complete. The

tiles shall be fixed with Chemical on finished

plaster and filling the joints with matching

cement colour and cleaning the tiles etc.

Providing cement vata (10 cms. X 10 cms

70 size) quarter round in cement mortar 1:1 300.00 Rmt. 23.45

including neat cement finishing, watering

Granite Counter:

Providing and fixing Black or any approved

colour Granite Stone Counter for wash basin

etc. The counter shall be sandwich type and

shall have Polished kotah stone as base on

which the granite stone shall be resting. The

counter shall be embedded in the wall atleast

50 mm and shall be self resting and / or

having granite stone as base. The visible

edges of the Polished Kotah stone shall be

cladded with the Granite stone. The shape of

the final product shall be of any shape in plan

and the measurements of plan area shall be

considered for payment.

Double Polished Granite Stone Shelves :

Providing and fixing 15 to 18 mm thick

double polished Granite stone shelves with

fixing the edge atleast 25 mm inside the wall,

corner edge polishing the edge and fixing the

stones vertically and horizontally. The

dimension of the finished and visible stone

shall be taken for payment. Rates includes

necessary onsite polishing, waxing, edge

moulding (If required).

Tender Document “Extension of Community Health Centre in Vastral Ward, East Zone, Ahmedabad” PRICE BID Page

Granite Stone Partitions:

Providing and fixing Double side polished

to 18 mm thick any colour granite stone to be

fixed as a partition in wall. The size of a

partition shall be 1.20 Mts. X 0.90 Mts. One

side of 1.20 Mts length shall be embedded

atleast 50 mm in the wall vertically and shall

73 be fixed with Cement Mortar 1:1. The 20.00 Smt 1398.00

partition shall be fixed after cutting the stone

as per the design and pattern approved. The

partition shall be polished on both the sides

and shall be fixed as per the directions of the

project consultants. All the visible edges of

this stones shall be properly moulded and

polished on site.

Providing and fixing 10 mm thick multiwall

Polycarbonate roof sheets of approved make,

on structural roofing / sky light structures in

shapes as per Architect’s drawing. The rate

shall include cost of scaffolding, screws, nuts,

bolts and all necessary fixtures and fastening

etc. complete. Structural steel to be

measured and paid extra.

Providing and fixing Kotah stone and Granite

Sandwich Seating of 450 mm Height from

finished floor and 500 mm width. Rates

includes moulding and polishing of all the

visible edges. Providing double granite (Back

to back fixed) both visible sides polished

support at minimum 1000 mm centre to

center. and vertical at end shall be 200 mm

above the seating height. The corner of the

vertical shall be cut in half round of size 3" x

3" and the edges shall be moulded and

polished as per the instructions.

Measurement from Plan shall be taken for

Providing & Applying two coat of white putty

of Birla or equivalent at all levels to internal

plaster surfaces/POP surfaces of concrete,

masonry work including jambs, sills,

grooves, pattas, rounding of corners after

thoroughly brushing the surfaces free from

mortar dropping and other foreign matter

and also including preparing the surface

even and sand papered smooth etc. after

applying every coat of putty. Priming coat of

alkali resistant cement primer (water or

solvent based) is to be applied before at all

levels, all floors, all height, all complete as per

drawing, specifications, instruction &

directions of the Engineer-in-charge.

Payment shall be done as per drawing/laid at

site of plastered area. Approved Brands : J.K.

White, Birla, Asian.

Applying priming coat over new steel and

other metel surface after and including

77 preparing the surface by throughly cleaning, 1200.00 Smt. 34.34

oil, grease, dirt and other foreign matter and

scoured with brushes fine steel wood,

Tender Document “Extension of Community Health Centre in Vastral Ward, East Zone, Ahmedabad” PRICE BID Page

scrapers and sand paper with ready mixed

priming paint brushing red lead.

Painting two coats (excluding priming coat)

on new steel and other metal surface with

enamel paint, brushing, interior to give an

even shade including cleaning the surface an

even shade including cleaning the surface of

all dirt, dust and other foreign matter.

Painting one coat extra on new steel and

other metal surface with enamel paint,

brushing, interior to give an even shade

including cleaning the surface an even shade

including cleaning the surface of all dirt, dust

and other foreign matter.

Wall Painting (two coats) with plastic

emulsion / Oil paint of approved brand and

manufacture and of shade required on

undecorated wall surfaces to give an even

shade, over and including a priming coat with

80 alkali resistance primer of approved brand 7200.00 Smt. 78.44

and manufacture after thoroughly brushing

the surface free from mortar droppings, and

other foreign matter and also including

preparing the surface even

and sand -papered smooth

Wall painting with plastic emulsion paint for

subsequent coat of approved brand and

manufacture on undecorated wall surface to

81 give an even shade including thoroughly 7200.00 Smt. 33.39

brushing the surface free from mortar

droppings and other foreign matter and sand

papered smooth.

Providing and applying 2 mm thick rustic

type texture of specified quality approved

make make of Asian, Nerolec or equivelant

as per approval of EIC over plastered surface,

at all levels, all floors, all height, all complete

as per drawing, specifications, instruction &

directions of the Engineer-in-charge,

including scaffolding charges. Payment shall

be done as per drawing/laid at site of

plastered area.

Finishing wall with weather proof exterior

smooth emulsion paint on wall surface (two

coats) to give an even shade after thoroughly

83 brushing the surface to remove all dirt, dust 5000.00 Smt. 174.97

and remains of loose powdered materials etc.

complete. Primer coat shall be done before

starting this external paint.

Providing & laying M/F Suspended single

layer of 12.5mm tapered edge Gypsum Board

ceiling , which includes metal frame work

with using CS55, IC91, PC55, CA55 CRP

surface ribbed perimeter channels with the

84 help of nylon sleeves and screws at 610 mm 2400.00 Smt. 600.94

centres along the perimeter of ceiling. Then P

Steel CRP surface ribbed intermediate

channels of size 45mm from the soffit at

1220mm centres with P Steel™ CRP surface

ribbed ceiling angle fixed to soffit with cleat

Tender Document “Extension of Community Health Centre in Vastral Ward, East Zone, Ahmedabad” PRICE BID Page

and steel expansion fasteners. Then P Steel™

CRP surface ribbed Ceiling section are then

fixed to the P Steel™ intermediate channel

with the help of connecting clip and in

direction perpendicular to the P steel™

intermediate channel at 457.5mm centres.

Single layer of 12.5 mm Gypsum boards are

then screw fixed to ceiling section with

25mm drywall screws at 230mm centres.

Finally square and tapered edges of the

boards are to be jointed and finished so as to

have a flush look which includes filling and

finishing with Jointing compound, Joint

Paper tape and two coats of Drywall Top

Coat. Rates shall be inclusive of cost of

making cut outs/openings for electrical

fixtures, tube lights /air-conditioners grills,

diffusers etc. & providing additional sections

for strengthening the openings/cutouts,

making grooves between wall & board or as

per drawing /instruction of EIC . Area of

cutouts shall not be deducted and no extra

payment shall be considered for additional

sections provided . Only plan area shall be

considered for payment. All curved surfaces,

recesses, waffles and corbellings shall be part

of the false ceiling & flat area in plan shall be

measured for payment (Section must from P

SteelTM Brand)The rate shall be in sq.mt. for

all floors and at all heights including all costs.

The rates are also inclusive of necessary

scaffolding, tools, tackles etc. The shop

drawing (or a sample mock of 5 sqm

minimum of the frame work and ceiling)

shall be approved from EIC . Groove shall be

provided at the junction of the false ceiling &

the wall & including all accessories, material

& labor complete as directed by Architect /

Engineer – in – charge.

Providing and fixing Plaster of Paris ceiling

with G.I suspenders etc. Complete

Providing and fixing 12 mm thick cement

sheet with necessary carving (as per design

approved) and fixing it with screws on M.S.

Pipe , wall , ceiling etc. Complete. This

includes necessary Painting with one coat of

Providing and fixing border pattis of

approved quality of teak wood. Rate includes

necessary screwing, nailing, fixing etc.

complete. Rate also includes giving the

border patti french polish of approved shade.

Before polishing the pattis shall be scrapped

with sandpaper and three coats of french

polishing shall be done as per the

instructions and directions of the engineer in

Tender Document “Extension of Community Health Centre in Vastral Ward, East Zone, Ahmedabad” PRICE BID Page

Providing and fixing Waterproof wall paper

at any height, level as directed.

Providing and fixing aluminium extruded

section body tubular type universal

hydraulic door closer (having brand logo

with ISi, IS : 3564, embossed on the body,

door weight upto 36 kg to 80 kg and door

width from 701 mm to 1200 mm), with

double speed adjustment with necessary

accessories and screws etc. complete.

Approved brandes Ebco, kadson, falcon or

equivalent ISI make as directed etc.

Providing and fixing Glass Bricks of approved

size (preferred size: 190 mm x 190mm x

90 mm). Colour Preferred : oceanic blue , Milky 150.00 Nos. 400.00

white and clear glass. Rate includes all

necessary grout / chemical etc. required to

fix the glass bricks.

Providing and fixing clear / colour acrylic

plate (3 to 4 mm thick) for making signages Sq.

with vinyl letters and back painted (in case of Inches

clear acrylic). Rate includes fixing the plate

with studs at any height and level.

Aluminum Composite Panel:

Providing and Fixing Alluminium Composite

Panel of (approved make by Architect) 4 mm

thick exterior grade 30 micron PVDF with

coil thick of 0.25 mm & frame work made out

from Alluminium anodised section of size

x 25 mm ( w app = 0.57 kg/m) having weight

of 2.6 kg for 15' supported on Masonary/

RCC with the help of MS Bracket fixed with

Brick Fastner/ Anchor Fastner and groove

92 filled with silicon grade 995 and 789 and G.P 50.00 Smt. 3403.00

Where it is necessary at pressure tape Baker

Rod size depend upon gape between two

Panel of bowl corning corporation make etc.

complete as per Architect dwg. and as per

instruction of E.I.C. (Rate are included

providing & fixing of MS structure steel work

for fixing of Alluminium Composite Panel

when and where requried). Preferred Brands

EVA, Flexibond, Alu-decor, Timex and

colours as approved by the Consultants.

Providing and fixing Stainless steel brush /

matt finish metal letters (1” x 1” and height

as per requirement) in any language as

directed.Rate includes fixing the same at any

height and level as directed by the project

consultants. This includes providing

93 temporary structures at any height and level 1400.00 Inch. 93.85

etc. complete. For measurement, width and

height of the letter shall be measured,

whichever is higher, shall be measured in

Running inch and paid accordingly. For any

logo, the measurement of height and width

shall be measured and total inches shall be

Tender Document “Extension of Community Health Centre in Vastral Ward, East Zone, Ahmedabad” PRICE BID Page

calculated 1.50 times and shall be paid

Providing in line level plumb, fabricating and

fixing three row horizontal barbed wire

fencing and punched tape concertina coil of

turns per meter of 610 mm diameter fixied

with clips on top of the angle iron posts. The

punched tape concertina coil having sharp

barbs at every 25 mm spacing shall be

mm thick and 19 mm width and weighting

Kg./100 mtr. (Average) as per manufacture's

specification. The rate shall also include

providing and fixed 1.20 mt. total long MS

angle 40 x 40 x 6 mm @ 3.00 mt. c/c spacing

embedded in RCC column, angle posts shall

be painted with one coats of red oxide and

two coats of enamel paint of approved

quality at top of compound wall.

Providing and fixing 1.20 Metre high fencing

with 2.0 Metre long M.S. Angle posts 40 mm

x 40 mm x 6 mm and oil painting 3 coats fixed

at 2.5 Mt,C/c. with five Horizontan lines and

two diagonals of galvanised steel barbed

wire weighting 9.38 Kg. per 100 Metre,

strained and fixed to posts with G.I,staples

including fixing the postsin ground with

M x 0.5.M x 0.5 M. block in C.C1:5:10 etc.

Providing and fixing 23 cms wide chicken

96 mesh jaali with nails & then application of 15 165.00 Smt. 292.59

mm plaster on R.C.C. & Masonary joints as

per directed of Engineer in Charge

Providing throating or plaster drip, grooves

and moulding to Wall , R.C.C. chajja and slab.

Providing and fixing stainless steel (Grade

304) railing,daso, grill work etc. made of

Hollow tubes, channels, plates etc., including

welding, grinding, buffing, polishing and

making curvature (wherever required) and

fitting the same with necessary stainless

steel nuts and bolts omplete, i/c fixing the

railing with necessary accessories &

98 stainless steel dash fasteners , stainless steel 300.00 Kgs. 650.00

bolts etc., of required size, on the top of the

floor or the ide of waist slab with suitable

arrangement as per approval of Engineer-in-

charge, ( for payment purpose only basis of

standard theorical weight of stainless steel

members shall be considered. No extra shall

be paid for fixing accessories such as nuts,

bolts, nails, fasteners etc.).

Making "V" Notch , Moulding , in any kind of

tiles / stone etc.

Chainlink Fencing :

Chainlink Fencing ( 4' 0" Tall ) with

Necessary 3" Diameter M.S. Pipe of size

Mts. and frame of 35 x 35 x 5 mm M.S. angle

and fixing with 25 x 5 mm M.S. Flat, including

necessary foundation work with R.C.C. 1:2:4,

Tender Document “Extension of Community Health Centre in Vastral Ward, East Zone, Ahmedabad” PRICE BID Page

of size atleast 350 mm x 350 mm x 230 mm.

Rate also includes painting all the steel works

with one coat of Primer coat and 3 coats of

approved brand and shade oil bound enamel

paint, etc. complete. The spacing of the

chainlink shall be not more than 50 mm c/c,

and the gauge of the wire used shall be

Groove cutting in Stone :

Making of 2 to 3 mm groove in Kotah stone /

any stone / granite etc. in steps / stairs so as

to give an anti skiding effect. This shall be

done as per the instructions and pattern

given by the consultants.

Providing and fixing Structural Glazing with

using the 17 Micron anodised of approved

colour alluminium section as transium,

mullium of size 63mm x 38mm x 2 mm with

using 6 mm thick reflective structural glass of

approved make, colour / Tinted, toughned

and shade and fixed with silicone sealant and

spacer tap and at corner sealed neoprene

foam dust and Air sealed gasket mirred

including scaffolding, cleaning of glass

etc.complete at all heights anf lifts with all

necessary fitting and fixtures, anchore

fasteners, necessary M.S. or Aluminium

brackets, suitable design for openable or

sliding window as per Architectural drawing

and as directed by Engineer-in-charge.

Grooves between the glasses to be filled with

sealant of Dow corning - structural sealant

995, weather sealant 789. The entire facade

should be water proof. The mullions are to be

connected to bracket by SS-304 nut bolts.

Measurement shall be given as per actual

execution of the work. (M.S. fabrication shall

be measured and paid seperately)

Providing & Mixing of Water proof Chemical

in Cement mortar for Inside/ outside Plaster

103 work of "Roof " , "Fosroc" or equivalent make 100.00 Lits. 225.00

in proportion as per company's user manuals

& Direction of engg. In charge.

Providing and fixing furniture under

platform. Providing and fixing wooden

furniture made from wood and plywood. The

frame shall be made from wood of size

mm x 25 mm and the shutters shall be made

from 19 mm MR grade plywood. The inner

side of the shutters shall be cladded with

mm thick laminate (of approved brand and

shade) while the outer side of the plywood

shall be cladded with 1.0 mm thick laminate

(of approved brand and shade). The hinges

shall be "W" type steel hinges and the storage

shall have atleas one lock and one stopper.

The hinges used shall be of heavy type

Stainless steel hinges and the thickness of the

shutter shall be cladded with 12 mm thick

border patti. This border patti shall be

polished (approved shade) in melamine

Tender Document “Extension of Community Health Centre in Vastral Ward, East Zone, Ahmedabad” PRICE BID Page

finish. For payment, the elevation

measurement i.e. height and width of the

storage shall be measured and paid as per the

unit mentioned in the BOQ.

Providing and fixing Sun control reflective

105 type films on glass doors / windows etc. As 225.00 Smt. 646.37

Providing & Fixing in Position Vertical Roller

Blinds with Minimum 3 % and Maximum 5 %

Light Transperace Screen Fabric Incuding

Providing & Fixing of Powder coated G-

Channel at the Topof Window with necessary

Screw , Cleats etc. and PVC Roller ( Weight

Pipe) and PVC Chain For Up and Down

106 Movement of Blinds etc. of Approved Make 100.00 Smt. 1372.03

and as per Drawings / Instruction of Engg. in

Charge For All Colors and Shades. Rates

Includes all Lead and Lift For All Floor Level,

All Height , All Material , Accessories, Fixing

Scaffolding , Labor etc. Complete in All

Respects. All Required Accessories &

Material must be From Same Manufacturer.

Providing and installing heavy duty

Aluminum cubicle track of size 20 mm

(width) x 30 mm (ht.), powder coated and

continuous pvc linter, nylon guiders,hooks,

plastic end caps, connecting bridge

107 overlapping joint connector, wall bracket etc. 50.00 Smt. 737.29

complete to make cubicle of size

approximately 2100 to 2400 mm clear from

the floor. The curtain system shall be of

Hospital standard and shall be approved by

the consultants.

Supply and Installation of Waterproof, anti-

microbial cubicle curtain with heavy

strength (18" oval net) at top and eyelets on

108 curtains and hooks. This includes all 125.00 Smt. 400.00

necessary accessories, fixing at any height

and level etc. complete as per the manual of

the manufacturer.

Painting with weatherproof exterior

emulsion acrylic based paint the National

Urban Health Mission Logo and Ayushman

Bharat Logo type using the grid and

dimension given as per defined shade code

109 by experienced applicator of standard 1.00 Nos 9200.00

drawing and design according to the

reference manual of Facade Branding for

Health & Wellness Centres of Ayushman

Bharat Scheme as per the direction of the

Engineer in Charge.

Painting the illustration circle of Diameter

inch with weather proof exterior emulsion

acrylic based paint as per defined shade code

by experienced applicator of standard

110 drawing and design according to the 12.00 Nos 2818.00

reference manual of Facade Branding for

Health & Wellness Centres of Ayushman

Bharat Scheme as per the direction of the

Engineer in Charge.

Tender Document “Extension of Community Health Centre in Vastral Ward, East Zone, Ahmedabad” PRICE BID Page

Painting with weatherproof exterior

emulsion acrylic based paint the pattern

using the grid and dimensions for door and

window given as per the defined shade code

by experienced applicator of standard

drawing and design according to the

reference manual of Facade Branding for

Health & Wellness Centres of Ayushman

Bharat Scheme as per the direction of the

Engineer in Charge.

Providing and fixing to wall, ceiling and floor

galvanised mild steel tubes (Medium Grade)

112 of the following nominal bore, tube fittings

and clamps including making good the wall,

ceiling and floor

(b) 20 mm Diameter. 10.00 Rmt. 297.25

(c) 25 mm Diameter 10.00 Rmt. 393.93

(d) 32 mm Diameter 10.00 Rmt. 491.51

(e) 40 mm Diameter 10.00 Rmt. 596.73

(f) 50 mm Diameter 10.00 Rmt. 779.60

Providing and laying in trenches galvanised

mild steel tubes (medium grade) of the

113 following nominal bore and tube fitting

(Earthwork in trenches to be measured and

paid for seperately).

(b) 20 mm Diameter. 20.00 Rmt. 190.97

(c) 25 mm Diameter 25.00 Rmt. 279.39

(e) 40 mm Diameter 45.00 Rmt. 421.12

(f) 65 mm Diameter 45.00 Rmt. 716.66

Providing, laying and jointing in true line and

level 15 mm dia. U.P.V.C. pipe (Schedule 40)

for cold water including fittings make

PRINCE/ SUPREME/ ASTRAL/FINOLEX or

equivalent brand as approved by Engineer in

charge. Pipes shall be fixed on the wall with

the help of clamp at every 2.00 meters c/c of

shall be concealed as directed including

necessary fittings etc. including testing of

pipe and joints and fixing the same with

adhesive solvent, including cost of all

materials etc. complete.

(a) 15 mm Diameter 50.00 Rmt. 71.93

(C) 25 mm Diameter 145.00 Rmt. 90.93

(d) 32 mm Diameter 115.00 Rmt. 117.97

(e) 40 mm Diameter 115.00 Rmt. 146.65

(f) 50 mm Diameter 165.00 Rmt. 193.73

Providing and fixing concealed center point

to wall, ceiling & floor CPVC (SDR 13.5) Pipe

having National Sanitation Foundation (NSF)

115 seal for potable water of following diameter

nominal bore tube fittings and clamps

including making good the wall, ceiling and

floor etc. compelte for (A) 15 mm Diameter.

(a) 15 mm Diameter 10.00 Rmt. 165.21

(b) 20 mm Diameter. 10.00 Rmt. 202.97

(C) 25 mm Diameter 10.00 Rmt. 247.25

(d) 32 mm Diameter 10.00 Rmt. 330.36

Tender Document “Extension of Community Health Centre in Vastral Ward, East Zone, Ahmedabad” PRICE BID Page

(e) 40 mm Diameter 10.00 Rmt. 437.66

(f) 50 mm Diameter 10.00 Rmt. 647.30

Providng and fixing to wall ,ceiling and floor

10.00 kg. F/Sq. Cm2 working pressure

polythelene pipes of the following outside

diameter, low, density, complete with special

flange compression type fittings, wall clips

etc. making good wall ceiling and floor.

(a) 32 mm Diameter 50.00 Rmt. 116.40

(b) 75 mm Diameter 150.00 Rmt. 274.68

( c) 110 mm Diameter 200.00 Rmt. 332.91

Providing and fixing in position cowel vent to

(B) 75 mm diameter. 20.00 Nos. 385.88

Providing and fixing in position cowl vent to

(C) 100 / 110 mm diameter. 25.00 No. 496.90

Providing and fixing PVC Nahni trap

(Cockroach Trap) of the following nominal

diameter of self cleaning design with C.I.

119 screwed down or hinged grating including 20.00 No. 552.83

cost of cutting and making good the walls and

floor 100 mm inlet and 50 mm outlet. ( C)

100 mm Diameter.

Providing and fixing Water closet squatting

pan (indian type W.C. pan) size 580 x

mm. (A) Vitreous china Long pattern.The

closet shall be of approved brand and shade.

Providing and fixing of wall hung type with

concealed P or S trap Including jointing the

trap with soil pipe in cement mortar 1:1

(1cement : 1 fine sand) and in white colour

directed by Engineer-in-charge Including

121 cost of all material, labour, duroplast soft 18.00 Nos. 12613.27

close seat cover, jetspray, CI Chair Bracket,

SS Bolts and washers all complete as per

detail drawing and instructions of Engineer

in Charge. Reference Rates for Model : Cera

Health faucet - Providing & fixing of Hand Jet

Shower (Health Faucet) with 1 mtr Flexible

122 PVC Tube, wall hook, and 2-Way Bib Cock. 18.00 Nos. 1543.36

This is a consolidated item which includes

Providing and fixing 100 mm size P or S trap

for water closet squatting pan including

123 jointing the trap with the pan and soil pipe in 20.00 Nos. 311.85

cement mortar 1:1 (1 Cement : 1 Fine sand)

(A) Vitreous China.

Providing and fixing plastic seat and cover

for wash down water closet with C.P. brass

hinges and rubber buffers.(B) Black plastic

seat and cover.

Providing and fixing C.P. Brass waste for

washbasin or sink.

(A) 32 mm Diameter. 25.00 Nos. 67.24

(B) 40 mm Diameter. 25.00 Nos. 88.94

Tender Document “Extension of Community Health Centre in Vastral Ward, East Zone, Ahmedabad” PRICE BID Page

Providing and fixing M.I. Fisher union for

washbasin or sink.

(A) 32 mm diameter. 25.00 Nos. 77.97

(B) 40 mm diameter. 25.00 Nos. 87.77

Providing & fixing stainless steel sink, R.S. or

C.I. Painted brackets painted, 40 mm dia. C.P.

waste, C.P. brass chain and rubber plug,

strainer with necessary C.P. brass unions

complete including painting the fittings

127 and cutting and making good the walls 2.00 No. 2257.69

wherever required, with CC sink cock with

raised "J" shaped swinging spout. The scope

includes the following fixtures.(Make: Nirali-

Grace-plain-510 mm x 432 mm bowl with

Swan neck tap or equivalent).

Providing and fixing Providing and fixing

Ceramic Sink of Size 600 x 400 x 200 mm

deep (660 x 460 including rim). The rates

includes brackets, painted white including

cutting holes in platform and making good

the same but excluding fittings.. The rates

includes brackets, painted white including

cutting holes in platform and making good

the same but excluding fittings. Reference

Rates for Model : Cera Carat

Providing and fixing C.P. Brass shower rose

with 15 mm or 20 mm inlet. (A) 100 mm dia.

Approved Brands : Donald, ESS ESS, KCI, with

ceramic sprindels and half turn fixtures.

Providing and Fixing of C.P. Brass BIB Cock of

15 mm Dia of Jaquar make florentine series

130 model no. 5047n or equivalent but Approved 32.00 No. 1564.17

make & Model with all necessary fittings. as

approved by Engineer - in - charge.,

Providing and Fixing of C.P.Brass Pillar Cock

of 15 /20 mm Dia. of Jaquar make model no.

5011n or equivalent make with all necessary

fittings. as approved by Engineer - in -

charge., Ceramic Sprindel, Half turn, Heavy

duty. Approved Brands : Donald, ESS ESS, KCI

Providing & Fixing S.S type soap dish of

approved by consultant/Architect, including

civil cutting & backfilling as well as making

good the walls.

Providing and fixing brass angle cock ( C)

mm diameter. Ceramic Sprindel, Half turn,

Heavy duty. Approved Brands : Donald, ESS

Providing and fixing ball valve (brass) of

approved quality, High or low pressure, with

plastic floats complete :

(a) 15 mm Diameter 12.00 Nos. 886.22

(b) 20 mm Diameter 1.00 Nos. 1099.94

( c) 25 mm Diameter 20.00 Nos. 1552.93

(d) 40 mm Diameter 1.00 Nos. 3312.60

( e) 50 mm Diameter 2.00 Nos. 4613.48

Providing and fixing Full Way valve with

wheel of approved quality :

(a) 15 mm Full Way valve 1.00 Nos. 1461.17

Tender Document “Extension of Community Health Centre in Vastral Ward, East Zone, Ahmedabad” PRICE BID Page

(b) 20 mm Full Way valve 1.00 Nos. 1924.61

(c) 25 mm Full Way valve 16.00 Nos. 2535.55

(d) 32 mm Full Way valve 1.00 Nos. 3377.64

(e) 40 mm Full Way valve 6.00 Nos. 4661.10

(f) 50 mm Full Way valve 2.00 Nos. 6675.14

Providing and Fixing of swan neck Sink Tap

Wall mount/Plateform Mount Jaquar make

135 model no. 5357 n or equivalent make. Rate 12.00 Nos. 2622.00

shall Including of cost of labour, material,

necessary fittings etc.

Providing fixing of SS grab bar of Jaquar

make model no. 1507 or equivalent make

with all hardwares for Physically Handicap

Providing and fixing chromium plated bottle

trap with necessary couplings of approved

quality for wash basin. Approved Brands :

Donald, ESS ESS, KCI

Providing and fixign S.W. gully trap with C.I.

grating brick masonary chamber and water

tight C.I. cover with frame of 300 mm x

mm size (inside) with standard weight .

(A) 100 mm x 100 mm size P- Type. 20.00 No. 1279.40

(B) 150 mm x 100 mm size P- Type. 20.00 No. 1234.57

Providing and laying cement concrete

1:5:10 (1 cement : 5 fine sand: 10 graded

stone aggregate 40 mm nominal size)

139 bedding for stone ware pipes of following 50.00 Rmt. 125.90

internal diameter with necessary formwork

and curing complete (For 100 mm Dia. pipes

and average 112 mm bed thickness)

Providing and laying cement concrete

1:5:10 (1 cement:5 fine sand: 10 graded

stone aggregate 40 mm nomonal size)

140 bedding for stone ware pipes of following 100.00 Rmt. 211.59

internal diameter with necessary formwork

and curing complete (For 150 mm Dia pipes

and average 166 mm bed thickness)

Providing And Jointing Stoneware Pipes

Including Excavation Up to 2.00 Mt. Refilling,

Transporting Pipes To Work Site, Unloading,

Lowering In Trench, jointing material Such

141 As Cement, sand, Hemp Bitumen As Directed, 100.00 Rmt. 344.64

Incl. Watering The Trenches Spreading And

Carting away Of Surplus material as directed

by Engineer in-charge for (C) 230 mm

Providing and Laying (to level or slopes) and

jointing reinforced concrete Light Duty Non-

pressure pipes I.S. Class NP2 of 250 mm

diameter with collars and butt ends prepared

for collar joints including testing of joints

Constructing brick masonary chamber for

underground C.I. inspection chamber and

bends with bricks having crushing strength

not less than 35 Kg/Cm2 in Cement Mortar

1:5, C.I. Cover with frame (Light Duty)

mm x 610 mm internal dimensions total

Tender Document “Extension of Community Health Centre in Vastral Ward, East Zone, Ahmedabad” PRICE BID Page

weight of the cover with frame to be not less

than 38 Kg.(Weight of cover 23 Kg. and

weight of Frame 15 Kg.), R.C.C. top slab with

1:2:4 mix (1 Cement : 2 Sand : 4 Coarse

Aggregates) foundation concrete 1:5:10

inside plaster 15 mm thick with cement

mortar 1:3 finished smooth with a floating

coat of neat cement on walls and bed

concrete etc. complete. (i) Inside dimensions

455 mm x 610 mm and 450 mm Deep for

single pipe line.

Constructing brick masonary chamber for

underground C.I. inspection chamber and

bends with bricks having crushing strength

not less than 35 Kg/Cm2 in Cement Mortar

1:5, C.I. Cover with frame (Light Duty)

mm x 610 mm internal dimensions total

weight of the cover with frame to be not less

than 38 Kg.(Weight of cover 23 Kg. and

144 weight of Frame 15 Kg.), R.C.C. top slab with 5.00 Nos. 3624.51

1:2:4 mix (1 Cement : 2 Sand : 4 Coarse

Aggregates) foundation concrete 1:5:10

inside plaster 15 mm thick with cement

mortar 1:3 finished smooth with a floating

coat of neat cement on walls and bed

concrete etc. complete. (i) Inside dimensions

500 mm x 750 mm and 450 mm Deep with

one or two inlets.

Constructing brick masonary chamber for

underground C.I. inspection chamber and

bends with bricks having crushing strength

not less than 35 Kg/Cm2 in Cement Mortar

1:5, C.I. Cover with frame (Light Duty)

mm x 610 mm internal dimensions total

weight of the cover with frame to be not less

than 38 Kg.(Weight of cover 23 Kg. and

145 weight of Frame 15 Kg.), R.C.C. top slab with 4.00 Nos. 7109.35

1:2:4 mix (1 Cement : 2 Sand : 4 Coarse

Aggregates) foundation concrete 1:5:10

inside plaster 15 mm thick with cement

mortar 1:3 finished smooth with a floating

coat of neat cement on walls and bed

concrete etc. complete. (i) Inside dimensions

600 mm x 850 mm and 450 mm Deep with

three or more inlets.

Constructing manhole with RCC top slab in

1:2:4 mix foundation concrete in 1:3:6 mix

inside plastering 15 mm thick with Cement

Mortar 1:5 finished with a floating coat of

neat cement and making channels in cement

concrete 1:2:4 finished smooth complete

including curing and festing (i) Inside

146 mm x 1200 mm and 1.5 Mt deep including 1.00 Nos. 10920.76

C.I. Cover with frame size 560 mm diameter

total weight of cover and frame to be not

less than 128 Kgs.( Weight of Cover 64 Kgs

and weight of Frame 64 Kgs.) (A) With

mm thick walls of brick masonary using

bricks having crushing strength not less

than 35 Kg/ Cm2 in cement mortar 1:5(1-

Tender Document “Extension of Community Health Centre in Vastral Ward, East Zone, Ahmedabad” PRICE BID Page

Cement: 5 Coarse Sand) (1) A type depth

0.90 Mt for any dia sewer.

Constructing manhole with RCC top slab in

1:2:4 mix foundation concrete in 1:3:6 mix

inside plastering 15 mm thick with Cement

Mortar 1:5 finished with a floating coat of

neat cement and making channels in cement

concrete 1:2:4 finished smooth complete

including curing and festing (i) Inside

mm x 1200 mm and 1.5 Mt deep including C.I.

147 Cover with frame size 560 mm diameter total 1.00 Nos. 19139.07

weight of cover and frame to be not less than

128 Kgs.( Weight of Cover 64 Kgs and weight

of Frame 64 Kgs.) (A) With 230 mm thick

walls of brick masonary using bricks having

crushing strength not less than 35 Kg/ Cm2

in cement mortar 1:5(1- Cement: 5 Coarse

Sand) (1) B type depth 1.50 Mt for any dia

Providing & Fixing F.R.C. M.H./ CH.seat &

cover incl. carting to the work site etc. comp.

directed. F.R.C. Extra Heavy Duty (EHD-35)

Manhole Covers & Frames Cover : 728 mm ø

& 100 mm thick circular cover, 35.00 MT load

design, 100 x 2 mm M.S flat allround, 16mm

ø plain round bar for lifting the cover &

should be fitted with plastic cups. Frame :

560 mm ø clear opening, outer size-

888x888x175 mm. On the upper periphery

of frame 25 x 3 mm wide MS flat should be

well embed in concrete to protect the edges

of frame. FRC E.H.D.-35 manhole cover &

frame described as above.

Providing & Fixing F.R.C. M.H./ CH.seat &

cover incl. carting to the work site etc. comp.

directed. For FRC heavy duty cover size

mm. & 90 mm thick circular cover 20 M.T.

design load and frame size 560 mm clear

opening size 890 x 890 x 120 mm.

Providing and fixing in position with clamps

etc. 32 mm nominal internal diameter

galvanised steel tube flush pipe for high level

flushing cistern including connecting the

flush pipe with cistern and closet and making

good walls and floors.

Providing and fixing 12.5 Liters low level

flushing cistern with a pair, of C.I. or Mild

Steel Brackets complete with fitings uch as

lead valve less syphon, 15 mm nominal size

brass ball valve with polythene float, C.P.

151 brass handle unions and couplings for 15.00 Nos. 2321.21

connections, with inlet, outlet and overflow

pipes, 40 mm dia. porcelain enamelled flush

bend including cutting holes in walls and

making good the same connecting the flush

bend with cistern and closet.

Providing and fixing coloured glazed oval

type counter wash basin 520 x 450 mm in

152 size and make specified by the consultants 12.00 Nos. 6641.14

with one C.P. pillar cock, C.P. stop cock, P.V.C.

feed pipe C.P. waste coupling (32 mm),

Tender Document “Extension of Community Health Centre in Vastral Ward, East Zone, Ahmedabad” PRICE BID Page

rubber plug etc.complete. Rates includes

necessary cutting of platform, inner edge

moulding-polishing, and filling the gap with

approved shade silicon complete. Approved

Brands : Cera, Parryware, Soncera.

Providing, erecting and fixing double coated

Sintex, National, Reno or equivalent PVC (ISI)

water tank of required capacity each with all

153 necessary fittings and connections etc. 5000.00 Ltr. 3.91

complete on terrace at any height and level.

Approved Brands : Sintex, Reno, National,

Providing and fixing urinal of approved

quality including connection with trap and

with integral longitudinal flush pipe

(A)Large Urinal 550 mm x 300 mm x

mm. with standard flush pipe, Waster Pipe,

154 Waste Coupling, PVC Connection and G.I 10.00 Nos. 3344.35

clamps complete, including painting of

fittings and brackets, cutting and making

good the walls and floors wherever

requiredApproved Brands : Cera, Parryware,

Providing and fixing Cast iron steps of size

500 mm x 150 mm x 22.5 mm and painting

with two coats of anti-corrosive paint etc.

Providing and fixing 600 mm x 450 mm

bevelled edge mirror of superior glass

155 mounted on 6 mm thick A.C. sheet or 20.00 Nos. 825.48

plywood sheet and fixing to wooden plug

with C.P. brass screws and washers.

Providing and fixing C.P. brass towel rail

complete with C.P. brass brackets fixed to

wooden plugs with C.P. brass screws (B)

mm x 20 mm size.

Constructing Bombay pattern type catchpit

of size 0.60 x 0.60 mt depth up to 1.00 Mt.

including excavation BBCC (1:5:10) 23 cms

thick brickwalls in c:m (1:6) with 40 mm

thick IPS flooring in the proportion M15 at

bottom and 20 mm thick cement plaster

inside the catchpit in the prop of c:m(1:3)

without jali etc comp as directed.

Providing and fixing FRC catchpit jaali with

159 frame 600 mm x 600 mm clear opening etc. 20.00 Nos. 1383.93

Complete as directed by Eng. In charge.

Providing and fixing accessories of following

a) Long Body Doctor lever Cock 6.00 Nos. 2500.00

b) Two Way Bib Cock 12.00 Nos. 1426.00

c) 32 mm Dual Flush Metropole 8.00 Nos. 4500.00

Making connection to the existing Manhole in

running sewer including Dewatering and

other required machinery etc. of following

dia pipes at any convenient time. All

damaged work shall be well repaired as per

instructions. etc..complete.

(a) For Pipe 150 mm to 300 mm diameter 1.00 Nos. 1339.29

Tender Document “Extension of Community Health Centre in Vastral Ward, East Zone, Ahmedabad” PRICE BID Page

(b) For Pipe 400 mm to 600 mm diameter 1.00 Nos. 2232.14

Making connection of galvanised Mild steel

distribution branch with galvanised mild

162 steel main pipe upto 80 mm nominal bore by 1.00 No. 600.08

providing and fixing tee including cutting

and threading the pipes complete

Hiring Charges For J.C.B.Machine Including

Cost Of Fuel, Operator, Dirver Etc..

Hiring of Tractor with trolley considering

Hrs. As working Day hours inclu. Driver

(GWSSB SOR-2022-23 Section-2E-

Miscellenous Item No.7)

B PERCOLATING WELL

Drilling of pilot bore hole in alluvial strata by

165 direct rotary rig of 250 mm diameter.

166 Reaming 400 mm. 100.00 Rmt. 212.50

Electrologging charges with conveyance etc.

Providing and installing 200 mm diameter

(IS:12818) UPVC casing pipe- "CM" class 100.00 Rmt. 1193.75

168 plain pipe.

Providing and installing 200 mm diameter

(IS:12818) UPVC End cap, with Air vent 1.00 Set 669.64

Providing and laying 200 mm diameter

regular pipe with 1.5 mm sloted size cage

type trapezoidal shape wire wound little 100.00 Rmt. 1146.43

carbon galvanised screen confirming to IS:

171 Supplying and filling Pea size gravels 10.00 Cmt. 2029.46

Providing and fixing Air vent with 50 mm

Lowering and removing of dropline upto

173 Desired depth.

Using Air Compressor 60 CFM/150 PSI for

C LANDSCAPE WORKS

Providing good quality fertile soil, mixing

manure etc. Complete and making sub base

175 clear for laying lawn and other plantation etc. 500.00 Cmt. 450.00

Complete ( Item to be operated and paid only

for garden items).

Supplying Good Quality River Kamp as

directed etc comp.

Spreading of good earth like fertile river soil

or farm earth as directed and approved.

Supply and planting of Ficus panda, Ficus

178 benjamina, Ficus benjamina variegated, 10.00 Nos. 150.00

Ficus longisland bag size is 13 inch x 13 inch,

Tender Document “Extension of Community Health Centre in Vastral Ward, East Zone, Ahmedabad” PRICE BID Page

well branched, well established & free from

disease at site as per the instructions

Supply and planting of (Jasud, Ixora, Ticoma

Gaudi-chaudi, Gultora, Jetropha, Haemeliya,

Chandani, Mogaro, Galfemia, , Allamenda,

Desi Gulab, Euphorbia mili, Jasud Hybrid,

Chandani double, Madhukamini,

179 Madhumalti, Ticoma Capensis, Ixora draft, 100.00 Nos. 150.00

Nikadevia, English Karen etc.) having height

of minimum 2.00 to 2.5 ft. and bag size is

inch x 13 inch, well branched, well

established & free from disease at site as per

the instructions.

Supply and planting of common Medicinal

Plants like Ardusi, Aloe spp., having height of

minimum 2.00 to 2.5 ft. and bag size is 8 inch

x 10 inch, well branched, well established &

free from disease at site as per the

Supply and planting of Exotic and

Endengered Medicinal Plants like Insulin

plant, zer kochalu having height of minimum

2.00 to 2.5 ft. and bag size is 13 inch x 13 inch,

well branched, well established & free from

disease at site as per the instructions.

Supply and planting of Golden Bamboo

having height of minimum 5 to 6 ft. and bag

182 size is 8 inch x 10 inch, well branched, well 1000.00 Nos. 45.00

established & free from disease at site as per

the instructions.

Supply and planting of champa (deshi)

having height of minimum 8 to 10 ft. and bag

183 size is 15 inch x 16 inch, well branched, well 50.00 Nos. 450.00

established & free from disease at site as per

the instructions.

D OXYGEN PIPE LINE WORKS

Providing and fixing oxygen point at any

height and level.

Providing and fixing BPC flow meter with

humidifier bottle.

186 Providing and fixing Pin Adoptor 50.00 Nos. 592.00

Providing and fixing 28 mm copper pipe at

187 any height and level including accessories 176.00 Rmt. 1691.00

Providing and fixing 15 mm copper pipe at

188 any height and level including accessories 250.00 Rmt. 943.00

Providing and fixing 15 mm isolation valve at

189 any height and level including accessories 50.00 Nos. 1875.00

Providing and fixing 28 mm isolation valve at

190 any height and level including accessories 4.00 Nos. 5135.00

Providing and fixing alarm system as per the

requirement and standard practice.

Tender Document “Extension of Community Health Centre in Vastral Ward, East Zone, Ahmedabad” PRICE BID Page

E ELECTRIFICATION WORKS

Providing and fixing Main LT Panel near

192 Meter as per attached SLD 1.00 Job

(Job that includes)

2 I/c MCCBs, 400A(35kA), FP 1.00 Nos. 24979.00

3 O/G MCCBs, 250A(35kA), FP 2.00 Nos. 20739.00

4 O/G MCCBs, 125A(35kA), FP 1.00 Nos. 7976.00

5 O/G MCBs, 63A(10kA), FP 1.00 Nos. 730.00

6 O/G MCBs, 40A(10kA), FP 1.00 Nos. 662.00

FP SPD (1.4KV, 40KA, 8/20 Micro-second)

Equivelent to LEGRAND MAKE CAT.

Rotary Handle with all accessories.

100A-125A Rotary Handle with all

11 400A Cu. Busbars 1.00 RMT. 7247.00

12 250A Cu. Busbars 1.00 RMT. 4861.00

13 125A Cu. Busbars 1.00 RMT. 3171.00

14 100A Cu. Busbars 1.00 RMT. 1942.00

15 Voltmeter 1.00 Nos. 1263.00

16 Ammeter 1.00 Nos. 1543.00

17 Voltmeter Selector Switch 1.00 Nos. 314.00

18 Ammeter Selector Switch 1.00 Nos. 314.00

19 Energy Meter 1.00 Nos. 2670.00

20 SP MCBs, 6A(10kA), SP 8.00 Nos. 111.00

22 Indicating Lamps 12.00 Nos. 43.00

Providing and fixing Main LT Panel for 2F+3F

as per attached SLD

1 O/G MCCBs, 250A(35kA), FP 1.00 Nos. 20739.00

2 O/G MCCBs, 125A(35kA), FP 3.00 Nos. 7976.00

3 O/G MCBs, 63A(10kA), FP 8.00 Nos. 730.00

4 O/G MCBs, 40A(10kA), FP 8.00 Nos. 662.00

5 O/G MCBs, 32A(10kA), FP 6.00 Nos. 590.00

6 O/G MCBs, 25A(10kA), FP 6.00 Nos. 590.00

7 O/G MCBs, 16A(10kA), FP 2.00 Nos. 590.00

Rotary Handle with all accessories.

100A-125A Rotary Handle with all

11 250A Cu. Busbars 1.00 RMT. 4861.00

12 125A Cu. Busbars 1.00 RMT. 3171.00

13 100A Cu. Busbars 1.95 RMT. 1942.00

14 Voltmeter 1.00 Nos. 1263.00

15 Ammeter 1.00 Nos. 1543.00

Tender Document “Extension of Community Health Centre in Vastral Ward, East Zone, Ahmedabad” PRICE BID Page

16 Voltmeter Selector Switch 1.00 Nos. 314.00

17 Ammeter Selector Switch 1.00 Nos. 314.00

18 Energy Meter 1.00 Nos. 2670.00

19 SP MCBs, 6A(10kA), SP 8.00 Nos. 111.00

21 Indicating Lamps 12.00 Nos. 43.00

Supplying and erecting, commissioning and

testing of Diesel Generating set confirming

to IS: 4722:1968 & BS:5514 having

continuous rating, 3 phase, 415 volts,

cycles A.C. supply comprising of a totally

enclosed air/water cooled diesel engine with

multi-cylinders developing suitable BHP not

less than following capacity at 1500 RPM

with 10% overload for one hour in 24 hours

with standard accessories like fly wheel,

lubricating oil cooler, "A" class governor,

heavy duty fuel wheel and lubricating oil

filter, oil bath air filler, lubricating oil

pressure gauge, end exhaust manifold,

standard set of tools with adjustable

spanners, screw drivers, cylinder head to

cover, joint cylinder head to exhaust, element

lube oil filter, 12 / 24 volts electric starting

equipment complete with standard heavy

duty battery, dynamo, cut-outs, ammeter,

necessary wiring, pressure gauge, starter etc

and heavy duty Residential type exhaust

silencer (With DEF System) and vertical hot

logged with asbestos rope, save oil trays,

exhaust piping of required length, standard

wall/floor mounted fuel with level indicator

and piping and drip proof alternator, self

excited, self regulated, screen protected, with

excitation system, capable of delivering the

rated system output at 415 volts, 3 phase,

PF, 50 Hz, 4 wire, running at 1500 RPM,

conforming to IS-4722- 1968 with voltage

regulation +/- 5% of rated voltage from no

load to full load. Both the engine and

alternator fitted on a common fabricated

steel base plate with antivibration mounting

engine and alternator both connected to

each other by flexible flange coupling and

with floor/wall mounted control panel box

comprising of voltmeter ammeter, selector

switches, ACB / MCCB / MCB of adequate

indicator lamps duly wired with HRC fuses.

The alternator & control panel shall be

connected with provided suitable capacity

armoured cable and complete with Acoustic

enclosure (canopy) made out of 16 SWG

CRCA Sheet, sound absorbing material

Rockwool of 64 density & 100 mm thick

conforming to IS:8183 / PU Foam of

Density - at least 40 mm. The resin bonded

Tender Document “Extension of Community Health Centre in Vastral Ward, East Zone, Ahmedabad” PRICE BID Page

rockwool covered from inside the canopy by

perforated sheet with 3/4 mm holes, sound

level not more than 75 dB at a distance of

mtr, as per PVCT norms.DG set should have

in built fuel tank capacity of minimum 8 hrs

of continous running capacity on full load .

Erection, commissioning and satisfactory

testing as per requirement with first filling of

fuel (minimum up to the 80% of fuel tank

capacity), oil, etc. with guarantee /

Warrantee of complete system for Two

years. & with obtaining all necessary

certificate from Electrical Inspector. The

Capacity and Ratings of DG sets are as below.

(As per new CPCB4+ Emission norms

Engine With - Turbo Charger, EGR (Exhaust

Gas Recirculation), CRS (Common Rail Fuel

System), DOC (Diesel Oxidation Catalyst),

SCR (Selective Catalytic Reduction),

Integrated wiring harness connected to ECU

(M) Continuous rating of 125 KVA ,BHP not

less than 154 BHP

Providing & erecting approved make AMF

control panel suitable for following size of

phase, 415 V., 50 cycles, A.C. diesel

generating set complete of scope as detailed

1) Power module: A pair of

electromechanically interlocked contactors

(for mains & generator) Overload relay for

generator contactor Neutral contactor for

mains and generator Power socket for

2) Control and metering module: Line

voltage monitor. Generator voltage monitor

Ammeter 3 items attempt start facility. Air

circuit breakers/MCB/MCCB of suitable

rating for auto/manual operation.

Auto/manual switch. Emergency stop push

buttons. Manual start push button. frequency

meter. Engine hour meter. Two earthing

3) Protection module: The engine shutdown

in the unlikely event of Low lube oil pressure

High cylinder head temperature. V belt

4) Indicators with alarm Load on generator.

5) Indicators Load on mains Engine fails to

start . Emergency stop battery charger.

The AMF Panel of following capacity

(C) AMF Control Panel for100 KVA/125 KVA

Design, Supplying, installing, testing of

factory fabricated ready made Three phase

APFC Panel Cubical Panel fabrication should

be type tested as per IEC 61921, 61439:1&2

Capacitor Duty Contactor for switching as

per following Steps Incomer Switch of MCCB

type Icu=Ics=50KA at 400/440 Volts, with

OC, SC, internal earth fault protection

Tender Document “Extension of Community Health Centre in Vastral Ward, East Zone, Ahmedabad” PRICE BID Page

Incomer Switch of MCCB type Icu=Ics=50 KA

at 400/440 Volts, with OC, SC, internal earth

fault protection,Copper tinned insulated

Busbar,Cubical panel should be indoor type

with IP 43 and IK 10,Metalized

polypropylene film type 3-phase 550 Volt

Capacitor,De tuning Reactor for each

capacitor,Panel having Short Circuit and

Overload protection,Each step Capacitor

having suitable MCB with Sc, OL, internal

earth fault relay,Each stage having Stage

Contactor (Capacitor load rating),PF

regulator master controller having suitable

steps with LCD display, Rs

Communication port, Indication LED Lamps

for main incomer and ON-OFF for each

capacitor bank,MS Chanel for Floor

mounting, Cable entry as per site situation,

Cooling fans for panel

Providing and erecting Approved make Four

pole moulded case circuit breaker having

breaking capacity ICU of 35 KA. at 415 V.

having normal current rating 125A. with

Fixed thermal & magnetic release suitable to

work on A.C.supply 50 c/s. with all internal

connections, spreader tinned copper &

complete erected in existing 16 G.M.S.

ICS=100% of ICU only (Cat III)

Providing and erecting Approved make Four

pole moulded case circuit breaker having

breaking capacity ICU of 35 KA. at 415 V.

having normal current rating 250A. with

Fixed thermal & magnetic release suitable to

work on A.C.supply 50 c/s. with all internal

connections, spreader tinned copper &

complete erected in existing 16 G.M.S.

ICS=100% of ICU only (Cat III)

Providing and erecting Approved make Four

pole moulded case circuit breaker having

breaking capacity ICU of 50 KA and above at

415 V having Normal current rating 400A.

199 with variable Thermal & magnetic release 1.00 Nos. 24979.00

suitable to work on A.C.supply 50 c/s. With

all internal connections, spreader tinned

copper & complete erected in existing

G.M.S. housing.

Providing and erecting Approved make Earth

fault Relay suitable to mount with inter

connection suitable to following size of

moulded case circuit breaker having CT ratio

& MCCB rating as following along with shunt

trip 220V AC. with all internal connections &

complete erected in existing M.S.housing. (3)

250 A -400 A , CT Ratio 1/400

Providing and erecting Sheet Steel powder

coated MCB distribution board - flush /

surface mounted fitted with busbar, neutral

link, earth bar and DIN rail, confirming to IS

Tender Document “Extension of Community Health Centre in Vastral Ward, East Zone, Ahmedabad” PRICE BID Page

13032 and BS 5486-1986 without MCB to

house appropriate nos. of MCBs.(The DBs

should be used of same company of MCB to

be used) Three phase 12 way SS Double door

for horizontal single phase outgoing

Providing and erecting Sheet Steel powder

coated MCB distribution board - flush /

surface mounted fitted with busbar, neutral

link, earth bar and DIN rail, confirming to IS

202 13032 and BS 5486-1986 without MCB to 8.00 Nos. 3379.00

house appropriate nos. of MCBs.(The DBs

should be used of same company of MCB to

be used). Three phase 8 way SS Double door

for horizontal single phase outgoing.

Providing and erecting Sheet Steel powder

coated MCB distribution board - flush /

surface mounted fitted with busbar, neutral

link, earth bar and DIN rail, confirming to IS

203 13032 and BS 5486-1986 without MCB to 2.00 Nos. 1478.00

house appropriate nos. of MCBs.(The DBs

should be used of same company of MCB to

be used). Single phase 12 way SS Double door

for horizontal single phase outgoing

Miniature circuit breaker single pole 6A to

32A suitable to operate on 240 V A.C. system

204 and having breaking capacity 10 KA to be 322.00 Nos. 111.00

erected in existing box. confirming to IS

8828/1996 with ISI Mark - SP MCB CAT-lll

Approved make ELCBs / RCCBs conforming

to IS: 12640 and having sensitivity of 30 mA

and Short Circuit withstand capacity of 6 KA

and suitable for operation on single phase

205 240 V. having characteristic of quick action & 14.00 Nos. 1950.00

tripping with all advance feature & do not

incorporate any electronic component. for

following Max. rating erected as directed

Amps.DP CAT-lll

Approved make ELCBs / RCCBs conforming

to IS: 12640 and having sensitivity of 30 mA

and Short Circuit withstand capacity of 6 KA

and suitable for operation on single phase

206 240 V. having characteristic of quick action & 29.00 Nos. 2213.00

tripping with all advance feature & do not

incorporate any electronic component. for

following Max. rating erected as directed

Amps.DP. CAT-lll

Approved make ELCBs / RCCBs conforming

to IS: 12640 and having sensitivity of 30 mA

and Short Circuit withstand capacity of 6 KA

and suitable for operation on single phase

207 240 V. having characteristic of quick action & 7.00 Nos. 2628.00

tripping with all advance feature & do not

incorporate any electronic component. for

following Max. rating erected as directed

Amps.DP CAT-lll

Supplying & erecting approved make RCCB +

MCB (Electro magnetic type only) working

208 on residual current device having 10 KA 4.00 Nos. 1925.00

short circuit breaking capacity and

mAmp. Sensitivity & 30 mili sec. tripping

Tender Document “Extension of Community Health Centre in Vastral Ward, East Zone, Ahmedabad” PRICE BID Page

time conforming to IS 12640 test knob

facility trip free mechanism operating for

rated leakage at nominal ten volt, complete

erected including all materials lugs screws

etc. completed.

[b] 32A / 40A, 2 pole Single Phase Cat. II

Supplying & erecting approved make RCCB +

MCB (Electro magnetic type only) working

on residual current device having 10 KA

short circuit breaking capacity and

mAmp. Sensitivity & 30 mili sec. tripping

209 time conforming to IS 12640 test knob 1.00 Nos. 2315.00

facility trip free mechanism operating for

rated leakage at nominal ten volt, complete

erected including all materials lugs screws

etc. completed.

[c] 63A, 2 pole Single Phase Cat. II

Supplying & erecting approved make RCCB +

MCB (Electro magnetic type only) working

on residual current device having 10 KA

short circuit breaking capacity and

mAmp. Sensitivity & 30 mili sec. tripping

210 time conforming to IS 12640 test knob 4.00 Nos. 2145.00

facility trip free mechanism operating for

rated leakage at nominal ten volt, complete

erected including all materials lugs screws

etc. completed.

[e] 32A to 40 A, 4 Pole Three Phase Cat. II

Sheets steel powder coated enclosure

211 suitable for incorporating One/Two nos. 8.00 Nos. 175.00

Providing & erecting 415 V MCB Four Pole

for Motor & Inductive Load (C Curve) having

212 10KA breaking capacity & confirms to IS 6.00 Nos. 590.00

:8828 in existing box having following

capacity 6 to 32 Amp. CAT-lll

Providing & erecting 415 V MCB Four Pole

for Motor & Inductive Load (C Curve) having

213 10KA breaking capacity & confirms to IS 14.00 Nos. 590.00

:8828 in existing box having following

capacity 6 to 32 Amp. CAT-lll

Providing & erecting 415 V MCB Four Pole

for Motor & Inductive Load (C Curve) having

214 10KA breaking capacity & confirms to IS 6.00 Nos. 730.00

:8828 in existing box having following

capacity 63 Amp.

Providing and erecting metallic vitrified

215 danger notice board for MEDIUM VOLTAGE 20.00 Nos. 69.00

installation to be erected as per IS.

Supplying & erecting approved make Digital

time switch having lithium cell 6 years

operative and operate battery backup

channel day clock with 14 memory

programme, suitable to operate on 240V +

5%, 16A with, floating contacts Minimum

switching setup time 1 minimum & LCD

display. Also comprised permanent ON/OFF

switching. Programming switches & housed

in fire proof thermoplastic enclosure &

Tender Document “Extension of Community Health Centre in Vastral Ward, East Zone, Ahmedabad” PRICE BID Page

transparent cover erected as required with

necessary connection erected as directed.

Providing and erecting approved make light

control unit suitable to operate on 230V

+20% having ON/OFF delay time of 30-50

217 seconds and having facility for Auto/manual 1.00 Nos. 2243.00

system having two LDR lens to intensity light

having capacity of 5A complete erected on

section pillar with pipe and stand.

Supplying & erecting power contactor ,AC3

duty for time switch complete erected as per

direction Cat III

(D) 4 pole 440V 40 Amp.

Making trench in soft soil of suitable width of

90 cms deep for laying cable or locating the

fault all over the run and backfilling the same

and making the surface as normal ground.

Covering of cable with second class bricks or

cement tiles laid cover the cable crosswise &

220 also on both sides with covering of 7. 5 Cms. 50.00 Rmt. 139.00

layer of sand above & below cable (16 bricks

Providing and erecting XLPE(IS:7098)(I)-88

ISI armoured cable multistrand Copper

conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe

at road crossing or floor of following size of

cables.(a) 4 core 2.5 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88

ISI armoured cable multistrand Copper

conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe

at road crossing or floor of following size of

cables.(a) 4 core 4.0 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88

ISI armoured cable multistrand Copper

conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe

at road crossing or floor of following size of

cables.(a-1) 4 core 6 Sq. mm

Providing and erecting XLPE (IS:7098)(I)-88

ISI armoured cable multistrand Aluminium

conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe

of following size of cables(c) 4 core 10 Sq.

Providing and erecting XLPE (IS:7098)(I)-88

ISI armoured cable multistrand Aluminium

conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe

of following size of cables. (A) 4 core 16 Sq.

Providing and erecting XLPE (IS:7098)(I)-88

ISI armoured cable multistrand Aluminium

conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe

of following size of cables

(B) 4 core 25 Sq. mm

Providing and erecting XLPE (IS:7098)(I)-88

ISI armoured cable multistrand Aluminium

Tender Document “Extension of Community Health Centre in Vastral Ward, East Zone, Ahmedabad” PRICE BID Page

conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe

of following size of cables

(D) 3 1/2 core 70 Sq. mm (35 Sq. mm 1/2

Providing and erecting XLPE (IS:7098)(I)-88

ISI armoured cable multistrand Aluminium

conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe

of following size of cables

(h) 3.5 core 185 Sq. mm

Providing and, fixing heavy duty flange type

brass cable gland with rubber ring for PVC

insulated armoured cable complete with out

going tails, insulating tape etc for following

size of cables.

Solderless crimping type Copper lugs

229 conforming to IS suitable for cable of 8.00 Nos. 65.00

following size evenly crimped with high

pressure tool & connected to switchgear

terminals with brass/cadmium plated nut

bolts in an approved manner.

(E) 4 core 4 Sq. mm / 4 core 2.5 Sq. mm / /

4 core 1.5 Sq. mm

Providing and, fixing heavy duty flange type

brass cable gland with rubber ring for PVC

insulated armoured cable complete with out

going tails, insulating tape etc for following

size of cables.

Solderless crimping type Copper lugs

conforming to IS suitable for cable of

following size evenly crimped with high

pressure tool & connected to switchgear

terminals with brass/cadmium plated nut

bolts in an approved manner.

(E) 4 core 6 Sq. mm

Providing and, fixing heavy duty flange type

brass cable gland with rubber ring for PVC

insulated armoured cable complete with out

going tails, insulating tape etc for following

size of cables. Solderless crimping type

231 Aluminium lugs conforming to IS suitable for 4.00 Nos. 78.00

cable of following size evenly crimped with

high pressure tool & connected to switchgear

terminals with brass/cadmium plated nut

bolts in an approved manner.

(E) 4 core 10 Sq. mm

Providing and, fixing heavy duty flange type

brass cable gland with rubber ring for PVC

insulated armoured cable complete with out

going tails, insulating tape etc for following

size of cables. Solderless crimping type

232 Aluminium lugs conforming to IS suitable for 20.00 Nos. 95.00

cable of following size evenly crimped with

high pressure tool & connected to switchgear

terminals with brass/cadmium plated nut

bolts in an approved manner.

(E) 4 core 16 Sq. mm

Providing and, fixing heavy duty flange type

233 brass cable gland with rubber ring for PVC 4.00 Nos. 107.00

insulated armoured cable complete with out

Tender Document “Extension of Community Health Centre in Vastral Ward, East Zone, Ahmedabad” PRICE BID Page

going tails, insulating tape etc for following

size of cables. Solderless crimping type

Aluminium lugs conforming to IS suitable for

cable of following size evenly crimped with

high pressure tool & connected to switchgear

terminals with brass/cadmium plated nut

bolts in an approved manner.

(E) 4 core 25 Sq. mm

Providing and, fixing heavy duty flange type

brass cable gland with rubber ring for PVC

insulated armoured cable complete with out

going tails, insulating tape etc for following

size of cables. Solderless crimping type

234 Aluminium lugs conforming to IS suitable for 4.00 Nos. 202.00

cable of following size evenly crimped with

high pressure tool & connected to switchgear

terminals with brass/cadmium plated nut

bolts in an approved manner.

(C) 3 & 1/2 core 70 Sq. mm

Providing and, fixing heavy duty flange type

brass cable gland with rubber ring for PVC

insulated armoured cable complete with out

going tails, insulating tape etc for following

size of cables. Solderless crimping type

235 Aluminium lugs conforming to IS suitable for 14.00 Nos. 556.00

cable of following size evenly crimped with

high pressure tool & connected to switchgear

terminals with brass/cadmium plated nut

bolts in an approved manner.

(E) 3.5core 185 Sq. mm

Providing and fixing approved make

Perforated C type cable tray. Made from

sheet steel. The cable tray should be single or

double bended as per required and as per IS

2062/1079 and shall be coated with hot dip

galvanizing as per IS 2629/4759. with max

17.5% perforation with coupler plate / Fish

plate and GI hardware like nut - bolt and

washers etc. erection with necessary

support( included) as per Specification and

as per instruction of engineer in charge.(4)

200 X 50 X 1.6 mm Thick.

Providing and fixing approved make

Perforated C type cable tray. Made from

sheet steel. The cable tray should be single or

double bended as per required and as per IS

2062/1079 and shall be coated with hot dip

galvanizing as per IS 2629/4759. with max

17.5% perforation with coupler plate / Fish

plate and GI hardware like nut - bolt and

washers etc. erection with necessary

support( included) as per Specification and

as per instruction of engineer in charge..(5)

300 X 50 X 2.0 mm Thick.

Point wiring for modular Light Point / Bell

with 2-1.5 sq.mm & earthwire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade

238 FRLS PVC insulated multistrand copper 282.00 Nos. 445.00

wires, in following type of pipe to be erected

concealed in/ on surface on wall/ceiling

complete with 6A Modular type switch / bell

Tender Document “Extension of Community Health Centre in Vastral Ward, East Zone, Ahmedabad” PRICE BID Page

push & accessories and earth continuity of

following type, erected on PVC / Metallic box,

single mounting base frame covered with

textured/metallic front plate modules

erected on / in wall / ceiling as per pipe

erected, with necessary Lamp holder/ceiling

rose / H.D.Connector as directed.with

medium class Rigid PVC pipe and

Mains with 1.1 KV grade FRLS PVC insulated

ISI marked stranded Copper conductor wire

in following type of pipe to be erected

concealed in /flushed on wall/ceiling, with

239 1.5 sq. mm copper conductor FRLS PVC 2768.00 Rmt. 82.00

insulated stranded wire of green colour for

earth continuity of following size in (a) with

medium class Rigid PVC pipe and accessories

Wire : (C) 3 wire 1.5 sq. mm

Additional Wire : Mains with 1.1 KV grade

FRLS PVC insulated ISI marked stranded

Copper conductor wire in following type of

pipe to be erected concealed in /flushed on

wall/ceiling, with 1.5 sq. mm copper

conductor FRLS PVC insulated stranded wire

of green colour for earth continuity of

following size in (a) with medium class Rigid

PVC pipe and accessories

Wire : (D) 3 wire 2.5 sq. mm

Point wiring for modular secondary light

point with 2-1.5 sq.mm & earthwire of

sq.mm (green) both are of ISI marked 1.1 KV

grade FRLS PVC insulated multistrand

copper wires, in following type of pipe to be

erected concealed in / flushed on

wall/ceiling, complete with earth continuity

241 and necessary connection with primary light 194.00 Nos. 131.00

with accessories erected on Metal / PVC box

covered with 3 mm thick PC(Polycarbonet) /

Acrylic sheet for open / concealed wiring.

with necessary Lamp holder / ceiling rose /

H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and

Point wiring for modular Two Way

Controlled Light Point with 2-1.5 sq.mm &

earthwire of 1.5 sq.mm (green) both are of

.ISI marked 1.1 KV grade FRLS PVC insulated

multistrand copper wires, in following type

of pipe to be erected concealed in / flushed

on wall/ceiling ,complete with 6A Modular

type switches and following type of

accessories erected on PVC / Metallic box,

single mounting base frame covered with

textured / metallic front plate modules

erected on / in wall / ceiling as per pipe

erected. with necessary batten/angle holder

or ceiling rose or H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and

accessories. CAT-III

Point wiring for FAN with 2-1.5 sq.mm &

earthwire of 1.5 sq.mm (Green) both are of

Tender Document “Extension of Community Health Centre in Vastral Ward, East Zone, Ahmedabad” PRICE BID Page

.ISI marked 1.1 KV Grade FRLS PVC insulated

multistrand copper wires, in following type

of pipe to be erected concealed in / flushed

on wall/ceiling complete with 6A Modular

type switch and hum free EME four or more

step type electronic fan regulator with

separately mounted and accessories with

earth continuity of following type erected on

PVC / Metallic box, single mounting base

frame covered with textured/metallic front

plate modules erected on / in wall / ceiling as

per pipe erected. with necessary ceiling rose

/ H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and

accessories. CAT-III

Point wiring for Looped Plug with 6A

Modular type switch & 5 pin socket erected

on PVC / Metallic box, single mounting base

frame covered with textured / metallic front

plate modules erected on / in wall / ceiling

with following type accessories.

Do - As - Above but for 6 A x 5 pin 250 Volt

switched socket outlet point at convenient

location. ( Plug & Switch can be together or at

different location).

Point wiring for Individual Plug with &

earthwire of 1.5 sq.mm (Green) both are of

ISI marked 1.1 KV grade FRLS PVC insulated

multistrand copper wires, in following type

of to be erected concealed in / on surface of

wall / ceiling complete with Modular type

switch & 5 pin Plug erected on PVC / Metallic

246 box covered with appropriate front plate 128.00 Nos. 704.00

modules erected on / in wall / ceiling as per

pipe erected with following type of

[II] For 6/16A Plug with 2-2.5 sq.mm Cu.

(a) with medium class Rigid PVC pipe and

Providing & erecting Switch board for

Computer or electric apparatus consisting of

following modular type accessories mounted

with PVC / Metallic concealed/open box

with single mounting base frame covered

with textured/metallic /white front

247 plate,modules erected with necessary 26.00 Nos. 1122.00

connections as directed.

1 no. 6A/16A universal plug-switch

3 nos. 6A Switch

3 nos. 6A 5 pin Plug (SOR 2025-26 - 1-6-2-B

Supplying & erecting Electronic Type

Cordless Call Bell erected on PVC/Metal

248 board having portable bell push working on 5.00 Nos. 248.00

D.C. & bell on 230V A.C. supply with cells /

Providing and erecting 1.6 - 1.8 mm thick FIA

249 approved and ISI mark (embossed) RIGID 100.00 Rmt. 33.00

PVC PIPES of following size complete erected

Tender Document “Extension of Community Health Centre in Vastral Ward, East Zone, Ahmedabad” PRICE BID Page

with necessary PVC fittings & Junction boxes

fixed with adhesive solution & Clamps with

following type of erection.2) For erecting

concealed in RCC / Brick wall/slab or Open

along with continuous fish wire to draw

mains, laid in approved manner with

plastering by cement mortar & finishing the

surface to match the wall/ceiling.

Supply and laying of 25 mm rigid PVC pipe of

1.6-1.8 mm thickness.

Providing and erecting 1.6 - 1.8 mm thick FIA

approved and ISI mark (embossed) RIGID

PVC PIPES of following size complete erected

with necessary PVC fittings & Junction boxes

fixed with adhesive solution & Clamps with

following type of erection.2) For erecting

250 concealed in RCC / Brick wall/slab or Open 50.00 Rmt. 54.00

along with continuous fish wire to draw

mains, laid in approved manner with

plastering by cement mortar & finishing the

surface to match the wall/ceiling.

Supply and laying of 32 mm rigid PVC pipe of

1.6-1.8 mm thickness.

Providing and erecting 1.6 - 1.8 mm thick FIA

approved and ISI mark (embossed) RIGID

PVC PIPES of following size complete erected

with necessary PVC fittings & Junction boxes

fixed with adhesive solution & Clamps with

following type of erection.2) For erecting

251 concealed in RCC / Brick wall/slab or Open 20.00 Rmt. 67.00

along with continuous fish wire to draw

mains, laid in approved manner with

plastering by cement mortar & finishing the

surface to match the wall/ceiling.

Supply and laying of 40 mm rigid PVC pipe of

1.6-1.8 mm thickness.

Providing & laying approved make Double

walled corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II

)with necessary connecting accessories of

same material at required depth in existing

trench for laying of cable. below ground /

road surface for enclosing cable

(A)50 mm outer dia.

Providing & laying approved make Double

walled corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II

)with necessary connecting accessories of

same material at required depth in existing

trench for laying of cable. below ground /

road surface for enclosing cable

(B)63 mm outer dia

Providing & laying approved make Double

walled corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II

)with necessary connecting accessories of

same material at required depth in existing

trench for laying of cable. below ground /

road surface for enclosing cable

(C) 90 mm outer dia.

Tender Document “Extension of Community Health Centre in Vastral Ward, East Zone, Ahmedabad” PRICE BID Page

Supplying and erecting Flexible PVC

insulated multistrand multicore 1.1 kv grade

255 ISI marked copper wires of following size to 100.00 Rmt. 46.00

be erected as directed.

e) 1.50 Sq.mm 3 core round PVC sheathed

Supplying and erecting Flexible PVC

insulated multistrand multicore 1.1 kv grade

256 ISI marked copper wires of following size to 50.00 Rmt. 77.00

be erected as directed.

h) 2.50 Sq.mm 3 core round PVC sheathed.

Supplying and erecting Flexible PVC

insulated multistrand multicore 1.1 kv grade

257 ISI marked copper wires of following size to 75.00 Rmt. 106.00

be erected as directed.

i) 2.50 Sq.mm 4 core round PVC sheathed.

Supplying and erecting Flexible PVC

insulated multi strand multi core 1.1 kv

258 grade ISI marked copper wires of following 50.00 Rmt. 126.00

size to be erected as directed.

j) 4.00 Sq.mm 3 core round PVC sheathed.

Supplying and erecting Flexible PVC

insulated multi strand multi core 1.1 kv

259 grade ISI marked copper wires of following 75.00 Rmt. 175.00

size to be erected as directed.

K) 4.00 Sq.mm 4 core round PVC sheathed.

Mains with 1.1 KV grade FRLS PVC insulated

ISI marked stranded Copper conductor wire

in following type of pipe to be erected in / on

260 wall / ceiling with following sq. mm copper 10.00 Rmt. 179.00

conductor FRLS PVC insulated stranded wire

of green colour for earth continuity of

following size : 4 wire 4 sq. mm.

Mains with 1.1 KV grade FRLS PVC insulated

ISI marked stranded Copper conductor wire

in following type of pipe to be erected in / on

261 wall / ceiling with following sq. mm copper 245.00 Rmt. 258.00

conductor FRLS PVC insulated stranded wire

of green colour for earth continuity of

following size : 4 wire 6 sq. mm

Supplying and erecting LED indoor fittings

with LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with housing

used as a heat sink shall be made of thick

sheet Steel conforming to IS: 513/CRCA/

aluminium die cast powder coated and high

U.V. & corrosion resistance with diffuser

with company mark/name 120 to

V,Power Factor more than 0.9, THD < 10 %,

CCT 3000 K to 6500K - as per selection,

Luminaire efficacy> 110 lumens/watt ,LED

efficiency-110 lumens/watt LED driver

efficiency > 85 %

Occupany Sensor - Auto Dimaable CREE /

OSRAM / PHILIPS Lumileds / NICHIA /

SEOUL/Bridgelux make LED used for

luminaire. ( fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED

Tender Document “Extension of Community Health Centre in Vastral Ward, East Zone, Ahmedabad” PRICE BID Page

(iii) 18-20 Watts, Surge - 2KV,IP-20,

conventional 4 feet CAT-III

Supplying and erecting LED indoor fittings

with LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with housing

used as a heat sink shall be made of thick

sheet Steel conforming to IS: 513/CRCA/

aluminium die cast powder coated and high

U.V. & corrosion resistance with diffuser

with company mark/name

120 to 300 V,Power Factor more than 0.9,

CCT 3000 K to 6500K - as per selection,

263 Luminaire efficacy> 110 lumens/watt ,LED 7.00 Nos. 218.00

efficiency-110 lumens/watt

LED driver efficiency > 85 %

CREE / OSRAM / PHILIPS Lumileds / NICHIA

/ SEOUL/Bridgelux make LED used for

luminaire. ( fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED

(A) Tube Light with integral driver - (i)

Watts, Surge-2 KV, IP-20,2 feet Cat-lll (SOR

Supplying and erecting LED indoor fittings

with LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with housing

used as a heat sink shall be made of thick

sheet Steel conforming to IS:

513/CRCA/aluminium pressure die cast

powder coated and high U.V. & corrosion

resistance with diffuser housed in

aluminium casted body with company

160V to 270V,Power Factor more than 0.95,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select

any wattage capacity between the ranges

Circular shaped Surface Mount Downlight

with provision for spring loaded mounting

clips complete.IP20 - (iii) 16-20 watts, Surge-

Supplying and erecting LED indoor fittings

with LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with housing

used as a heat sink shall be made of thick

sheet Steel conforming to IS:

265 513/CRCA/aluminium pressure die cast 21.00 Nos. 423.00

powder coated and high U.V. & corrosion

resistance with diffuser housed in

aluminium casted body with company

160V to 270V,Power Factor more than 0.95,

Tender Document “Extension of Community Health Centre in Vastral Ward, East Zone, Ahmedabad” PRICE BID Page

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select

any wattage capacity between the ranges

Circular shaped Surface Mount Downlight

with provision for spring loaded mounting

clips complete.IP20 - (ii) 11-15 watts, Surge-

Supplying and erecting LED indoor fittings

with LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with housing

used as a heat sink shall be made of thick

sheet Steel conforming to IS:

513/CRCA/aluminium pressure die cast

powder coated and high U.V. & corrosion

resistance with diffuser housed in

aluminium casted body with company

160V to 270V,Power Factor more than 0.95,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select

any wattage capacity between the ranges

Circular shaped recessed Mount Downlight

with provision for spring loaded mounting

clips complete.IP20 - (iii) 16-20 watts, Surge-

Supplying and erecting LED indoor fittings

with LEDs of wattage 0.2 Watt to 0.5 Watt