Construction of RCC Drain including Manholes at Hafiz Bagh near JK Bank ATM Mallabagh, Srinagar

Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.All kinds of soil

Providing & Laying of stone soling/GSB including watering dressing and ramming with all carriages loading un-loading and stacking etc complete

Supplying and filling in plinth with fine sand under floors including, watering,ramming, consolidating and dressing complete.

P/L of WBMG2 with specified size of stone aggregates and screening and moorum and incl c/o consolidation and all leads and lifts complete job.

Providing, Laying, Spreading &Compacting graded stone aggregate (size range 53mm to 0.075mm) to wet mix macadam (WMM) specifications including mixing the material with water atOMC mechanical mixer plant carriage of mixed material by Tipper at site with all leads and lifts laying in uniform layers in sub base/ base course on a well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density complete as per technical

Providing and applying tack coat using hot straight run bitumen of 80/100 grade including heating the bitumen and sparying the bitumen with mechanically operated sparyunit fitted on bitumen boiler, cleaning and preparing the existing road surface to remove all dirt, dust, mud etc and finallybrooming the surface as per required specification. (Including cost &carriage of all materials involved upto site of work complete).On WBM surface using tar @0.75 kg/sqm.

Providing/ laying 50mm thick compacted bituminous macadam base course with stone aggregate of quality, size and grading as per specified in most spacification and straight run bitumen of grade 80/100 @ 3% by weight of total mix (@60 kg/cum) including hot mixing of stone aggrt. and bitumen in hot mix plant transporting and laying mixed material with paver finisher to the required level and grade. rolling with road roller of 8 to 10 ton capacity to achieve the required compaction and density (including cost &carriage of all materials involved upto site of work complete

Providing and applying tack coat using hot straight run bitumen of grade – VG-10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications On bitumen surface @ 0.50 Kg/sqm.

Providing/ laying 25mm thick semidence Bitumenous concrete using material agg. satisfying the gradation set out in most specification with 5% binder content (by way of total mix) bitumen 80/100 @2.88 kgs/ sqm with the aid of hot mix plant and paver finisher including rolling with 8 to 10 ton capacity road roller to achieve the required compaction and density with 8/100 including rolling and finishing complete including cost and carriage of material involved.

Providing/ laying 6mm thick seal coat premix fineagg. (Passing 2.36mm and retained on 180 micronsieve) with bitumen 128 kg of grade 80/100 bitumen per cum of fineagg. (0.768kg of bitumen per sqm) and 0.60 cum of fineagg. per 100 sqm of road surface including rolling and finishing complete as per most specification (including cost and carriage of all materials involved upto the site of work)