Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹60.7 Laccepted-aoc | ₹60.7 L | accepted-aoc |
Tender Value
₹70 L
EMD Value
₹1.2 L
Closing Date
12 Mar 2026, 9:30 pmClosed
Karnataka Neeravari Nigam Limited
Prasad AE
7019071191
REPAIRS AND MAINTENANCE OF ALLAGI(B) JACKWELL CUM PUMP HOUSE INCLUDING REPAIRS TO SHAFTS, PUMPS AND ALLIED ACCESSORIES UNDER BLIS IN AFZALPUR TALUKA FOR THE YEAR 2025-26.
KNNL/2025-26/LI/WORK_INDENT3662/CALL-3
KNNL/2025-26/LI/WORK_INDENT3662/CALL-3
Open
Lift Irrigation Scheme
Two Tender Document System(Two Cover)
KNNL Division BLIS Div Afzalpur
13 documents required · 13 mandatory
Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)
Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)
Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)
Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
List of Financial Resources with Certificates
The bidder should Upload Copy of the Valid KPWD Electrical License Class-I and above, or KSEI License Class-I & above registration certificate with validity.
The bidder should have satisfactorily completed at least One Similar nature of work (Electro-Mechanical) to value of not less than 50 percent of cost of work put to tender, i.e. Rs.29.49 Lakhs in any one year during previous five years i.e. 2020-21 to 2024-25. Necessary work done certificate issued by an officer not below rank of Executive Engineer is to be uploaded with technical bid. The cost will be updated to present value by giving weightage of 10 percent for each year, if work is completed prior to 2025-26.
The intending bidder should have executed following minimum quantities of the work/items during any ONE year of the last 5 financial years i.e. 2020-21 to 2024-25. 1. Dismantling of a pump with a capacity not less than 864 HP is 2 Nos., 2. Supplying and fixing of approved impeller shaft sleeves is 2 Nos,, 3. Erection of a pump with a capacity not less than 864 HP is 2 Nos., 4. Replacement of expansion joint rubber is 2 Nos.,
The bidder should Upload Copy of the Valid Registration Certificate issued by Labour Dept, Govt. of Karnataka.
EPF Registration Certificate along with latest paid challans.
Tenderers who meet above specified minimum qualifying criteria will only be qualified, if their available tender capacity is more than total tender value.Its calculated as AXNX2.5-B, Where, A is Max value of works executed in any 1 year during last 5 years updated to 2025-26 price level, N is No. of years prescribed for completion of works for which tenders are invited for 06 months. B is Value at 2025-26 price level, of existing commitments and ongoing works to be done during next 06 Months.
The Bidder should have achieved a Financial Turn-over of not less than the Amount put to tender i.e Rs.58.98 Lakhs in any of the TWO Financial years during the last 5 years, i.e, 2020-21 to 2024-25. Audit profit and loss account certified by a practicing charted accountant, the turnover will be updated to the present value by giving a weightage of 10 percent for each year prior to 2025-26.
Valid copy of GST Registration certificate along with latest paid challans.
Copy of the latest income tax return filed for financial year mentioning the PAN No.
The requisite EMD in electronic cash.
The intending bidder should furnish Liquid assets and /or availability of credit facilities of Minimum Rs. 30 percent of the amount put to Tender i.e. Rs.17.70 Lakhs, Credit lines/letter of credit/ certificates from nationalized banks for meeting the fund requirement.
ESI Registration Certificate along with latest paid challans.
The bidder should submit Scanned signature of the bidder or authorized representative in case of a firm or company to be attached to the bid document. Also in case of authorized representative, scanned copy of power of attorney should be uploaded.
₹1,750
₹1.2 L
12 Mar 2026
4 Mar 2026
13 Mar 2026
6 Mar 2026
REPAIRS AND MAINTENANCE OF ALLAGI(B) JACKWELL CUM PUMP HOUSE INCLUDING REPAIRS TO SHAFTS, PUMPS AND ALLIED ACCESSORIES UNDER BLIS IN AFZALPUR TALUKA FOR THE YEAR 2025-26.
Dismantling Of flowmor (kirloskar Pump (Type:BHQ62m single stage, self water lubricated of 1050HP having capacity of 6246 cumec/hour. Exclussive of all taxes etc. complete with all lead and lifts as d...
Checking shaft runout all set Exclusive of all taxes etc. complete with all lead and lifts as directed by engineer in charge.
supplying and fixing of approved strainer (MS Galvanised iron material ) Exclusive of all taxes etc. complete with all lead and lifts as directed by engineer in charge.
Supplying and fixing approved suction ball bearing, Exclusive of all taxes etc. complete with all lead and lifts as directed by engineer in charge.
supplying and fixing of approved impeller shaft sleeve, Exclusive of all taxes etc. complete with all lead and lifts as directed by engineer in charge.
Supply & Fixing approved dynamic balancing of impeller, Exclusive of all taxes etc. complete with all lead and lifts as directed by engineer in charge.
Supplying and fixing approved line shaft sleeve, Exclusive of all taxes etc. complete with all lead and lifts as directed by engineer in charge.
supplying and fixing of approved coupling rubber bush, Exclusive of all taxes etc. complete with all lead and lifts as directed by engineer in charge.
supplying and fixing of approved spider bearing Exclusive of all taxes etc. complete with all lead and lifts as directed by engineer in charge.
supplying and fixing of approved bowl bearing, Exclusive of all taxes etc. complete with all lead and lifts as directed by engineer in charge.
supplying and fixing of approved stuff box bearing, Exclusive of all taxes etc. complete with all lead and lifts as directed by engineer in charge.
supplying and fixing approved glands, Exclusive of all taxes etc. complete with all lead and lifts as directed by engineer in charge.
supplying and fixing approved allen key bolts, Exclusive of all taxes etc. complete with all lead and lifts as directed by engineer in charge.
supplying and fixing approved SS screw, Exclusive of all taxes etc. complete with all lead and lifts as directed by engineer in charge.
supplying and fixing approved gasket, Exclusive of all taxes etc. complete with all lead and lifts as directed by engineer in charge.
supply of approved paint and painting to column pipes, Exclusive of all taxes etc. complete with all lead and lifts as directed by engineer in charge.
Re errection of pump with motor pump alignment topping up with lubrication oil of servo system 68 and re-erection of electric motor by making all electrical connections and commissioning with all nece...
Transporting bowl assembly and spares to workshop and re-shifting to site. Exclusive of all taxes etc. complete with all lead and lifts as directed by engineer in charge.
Reconditioning of water cooling system for bearing house with ball valve pipe fitting. Exclussive of all taxes etc. complete with all lead and lifts as directed by engineer in charge.
supply and fixing approved make thrust bearing, Exclusive of all taxes etc. complete with all lead and lifts as directed by engineer in charge.
supply and fixing of approved guide bearing and ball bearing, Exclusive of all taxes etc. complete with all lead and lifts as directed by engineer in charge.
Supply and fixing approved brand Grease to pump and motor, Exclusive of all taxes etc. complete with all lead and lifts as directed by engineer in charge.
supply and fixing of approved make impeller casing ring, Exclusive of all taxes etc. complete with all lead and lifts as directed by engineer in charge.
Replacing of special oil for pumps thermo 68 grade.
Replacing of special grease for bearing Star bug.
Calibration of (A) Breakers: GCB wih C & panel No.=3 No.
Replacement of expansion joint rubber.
Supply of 260 KVAR 6.6 kV, 3 Ph, 50 Hz, Internal Delta Connected, APP Type, HT Capacitor for 435 kVAr. 6.6 kV Bank.
Charges for HT Capacitor & FCBC Battery Charger Transportation, Erection, testing and commissioning.
Engaging Pump Driver. (skilled) 8month june-2025to feb-2026 in 3shift 9x30x3=810
Engaging Watchman . (unskilled) from april-2025-march-2026 12month 2shift-12x30x3=1080
Diploma Electrical Engineer for Sub Station Maintenance. July-2025- jan-2026.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
DTP 3662-call-3.docx
Tender Document • 0.20 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].