Annual Rate Contract for 11 KV XLPE Cable Fault Detection and rectification work under Nardipur sub division area

Annual Rate Contract for 11 KV XLPE Cable Fault Detection and rectification work under Nardipur

sub division area

Sr. Description UOM Qty. Rate Amt. Rs.

1 Laying (including installation, testing and commissioning) Mtr 4500 335

of various size of 11 KV XLPE insulated Aluminium

armoured cable in ground 1200 mm deep, 300 mm wide

trench, providing sand cushioning below (75mm thick

layer of sand) and above (75mm thick layer of sand) of

the cable and covering it with RCC half round hume pipe

(150 mm inner dia with thickness of 30mm, 1 meter in

length) before refilling pre-bonding tap/warning tap

should provide below 700 mm from the ground level and

back filling the same to make ground level as per original.

As per specification and drawing of UGVCL. ( RCC half

round pipe should be provide throughout on cable

without gap , Only Cable will be Supplied by UGVCL)

2 Laying (including installation, testing and commissioning) Mtr 500 468

of various size of double circuit 11 KV XLPE insulated

Aluminium armoured cable in ground in single trench

1200 mm deep, 500 mm wide trench, providing sand

cushioning below (75mm thick layer of sand) and above

(75mm thick layer of sand) of the cable and covering it

with RCC half round hume pipe (150 mm inner dia with

thickness of 30mm) before refilling pre-bonding

tap/warning tap should provide below 700 mm from the

ground level and back filling the same to make ground

level as per original. As per specification and drawing of

UGVCL. ( RCC half round pipe should be provide

throughout on cable without gap , Only Cable will be

Supplied by UGVCL)

3 Laying of various size of 11 KV XLPE insulated Mtr 400 38

Aluminium armoured cable above ground in air for

termination of cable on Pole as per site condition and

instruction of engineer in charge (Excluding cost of clamp

and pipe) including carting

4 Supply and installation of clamps made from 50*6 mm GI Set 200 130

flat (Min. weight of flat 1.6 Kg per set) for fitting for

110mm GI/HDPE pipe above ground with the pole (with

cost of nuts & bolts)

5 Supply and installation of clamps from 50*6 mm GI flat Set 200 150

(Min. weight of flat 1.8 Kg per set) for fitting for 160mm

GI/HDPE pipe above ground with the pole. (with cost of

Signature of Contractor & seal

Division Office: Kalol, Mahendra Mill Road, Kalol (N.G)-382721, Telephone : (02764)223773

E-Mail:- [email protected] Website: www.ugvcl.com

Save Energy for Benefit of Self and Nation

SINGLE LOGO LETTERHEAD

6 Laying of various sizes of 11 KV XLPE insulated Mtr 300 150

Aluminium armoured cable in cable tray/ trench

over/below the ground level/ (Excluding cable tray, only

labour charges)

7 Laying of of 6.11kg/cm2 , class-4, 110mm O.D. , 6.5 mm Mtr 100 825

thickness H.D.P.E. pipe confirms to IS 4984 and BIS

certification at a minimum Depth of 1200 mm below the

road surface by Push through method, drilling the road

with HDD machine/manually without breaking the road

surface and laying of any size of HT XLPE insulated

Aluminum armoured Cable through the duct as per the

instruction of EIC and specifications (Without cost of

HDPE Pipe ,cable will be supplied by UGVCL) (For 70 &

185 mm2 XLPE cable)

8 Supply of of 6.11kg/cm2 , class-4, 110mm O.D. , 6.5 mm Mtr 100 525

thickness H.D.P.E. pipe confirms to IS 4984 and BIS

certification for laying of 11 KV XLPE Cable.

10 Laying of 6.11kg/cm2, class-4, 160mm O.D. , 12.0 mm Mtr 100 825

thickness H.D.P.E. pipe confirms to IS 4984 and BIS

certification at a minimum Depth of 1200 mm below the

road surface by Push through method, drilling the road

with HDD machine/manually without breaking the road

surface and laying of any size of HT XLPE insulated

Aluminum armoured Cable through the duct as per the

instruction of EIC and specifications excluding cost of

HDPE Pipe. Only Cable will be supplied by DISCOM.

(For 240 & 300 mm2 XLPE cable). (Without cost of

HDPE Pipe ,cable will be supplied by UGVCL)

11 Supply of HDPE pipe having 160 mm diameter, minimum Mtr 100 640

thickness 7.3 mm as per IS (Amendment no. 2-IS

4984:1995) of PE-100, 6KG/cm2 for laying of 11 LV

17 Providing and Fixing of Heat Shrikable Indoor

Termination Kits for for 3-Core, 11 KV XLPE

Aluminium armoured Cable as specified with connection

of leads including cutting, stripping of cable, insulations,

providing compression type terminal, crimping of lugs

with suitable crimping tool of

A 70 mm2 HT XLPE Cable NO 20 4718

B 120 / 150 / 185 mm2 HT XLPE Cable NO 40 4953

C 240 mm2 HT XLPE Cable NO 20 5252

D 300 mm2 HT XLPE Cable NO 1 5549

Signature of Contractor & seal

Division Office: Kalol, Mahendra Mill Road, Kalol (N.G)-382721, Telephone : (02764)223773

E-Mail:- [email protected] Website: www.ugvcl.com

Save Energy for Benefit of Self and Nation

SINGLE LOGO LETTERHEAD

18 Providing and Fixing of Heat Shrikable Outdoor

Termination Kits for 3-Core, 11 KV XLPE Aluminium

armoured Cable as specified with connection of leads

including cutting, stripping of cable, insulations,

providing compression type terminal, crimping of lugs

with suitable crimping tool of

A 70 mm2 HT XLPE Cable NO 10 5664

B 120 / 150 / 185 mm2 HT XLPE Cable NO 40 5982

C 240 mm2 HT XLPE Cable NO 20 6378

D 300 mm2 HT XLPE Cable NO 1 6676

19 Providing and Fixing of Heat Shrikable Stright Jointing

Kits for for 3-Core, 11 KV XLPE Aluminium armoured

Cable as specified with connection of leads including

cutting, stripping of cable, insulations, providing

compression type terminal, crimping of lugs with suitable

crimping tool of

A 70 mm2 HT XLPE Cable NO 10 7199

B 120 / 150 / 185mm2 HT XLPE Cable NO 40 7655

C 240 mm2 HT XLPE Cable NO 20 7880

D 300 mm2 HT XLPE Cable NO 2 8040

mm X 150 mm X 750 mm Concrete stone embedded in

earth at least 300 mm below the GL and 450 mm above

GL at distance of approximately 100 Meter or as directed

by engineer in charge. The route marker must be painted

with yellow colour of stone with red colour for embracing

painting & labour charges for excavation& refilling.

21 Labour Charges for fault finding of 11kv XLPE 70mm2 to Each 10 18000

240 mm2 U/G cable

22 Providing and fixing of Wooden clamps for cable suitable NO 20 320

for 70/185/240 mm2 XLPE cable

23 Dismantling of XLPE Cable from underground Mtr 100 155

24 Dismantling of XLPE cable from Pole/Gantry and re- Mtr 100 170

climbing of XLPE cable

25 Numbering of pole with paint by prepairing background NO 50 50.5

of one colour and have lettering ( hight 3" and width 0.5")

as directed by engineer incharge. (Colour to be used must

have ISI mark, colour to be provided by contractor)

26 ERECTION OF PSC POLES OF 8 *200 KG NO 8 1113

INCLUDING EXCAVATION OF PIT AND ANTI-

CLIMBING DEVICES, INSULATORS ETC.

COMPLETE AND PAINTING OF FABRICATED

MATERIALS USED ON THE POLES AND

NUMBERING OF POLE, WITHOUT COST OF NUTS

Signature of Contractor & seal

Division Office: Kalol, Mahendra Mill Road, Kalol (N.G)-382721, Telephone : (02764)223773

E-Mail:- [email protected] Website: www.ugvcl.com

Save Energy for Benefit of Self and Nation

SINGLE LOGO LETTERHEAD

& BOLTS,PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDINGERECTION OF

GUY SET AND EARTHING.

27 ERECTION OF PSC POLES OF 10 MTR *270 KG NO 8 2466

INCLUDINGEXCAVATION OF PIT AND ANTI-

CLIMBING DEVICES, INSULATORS ETC.

COMPLETE AND PAINTING OF FABRICATED

MATERIALS USED ON THE POLES AND

NUMBERING OF POLE WITHOUT COST OF NUTS &

BOLTS, PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDING ERECTION OF

GUY SET AND EARTHING.

28 ERECTION OF DOUBLE POLE STRUCTURE OF 8 NO 8 2530

METERS 200 KGPSC POLES INCLUDING

EXCAVATION OF PITS & REFILLING

OFEARTHING, FIXING OF CHANNELS,

SUPPORTING ANGLES,CLAMPS, ANTI-CLIMBING

DEVICES DANGER BOARDS,INSULATORS

ETC.COMPLETE AND PAINTING OF FABRICATED

MATERIALS USED ON THE POLES AND

NUMBERING OF POLE WITHOUT COST OF NUTS &

BOLTS, PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDINGERECTION OF

GUY SETS AND EARTHING. (WITHOUT AB

29 ERECTION OF DOUBLE POLE STRUCTURE OF 10 NO 8 5320

METERS 200 KGPSC POLES INCLUDING

EXCAVATION OF PITS & REFILLING

OFEARTHING, FIXING OF CHANNELS,

SUPPORTING ANGLES,CLAMPS, ANTI-CLIMBING

DEVICES DANGER BOARDS,INSULATORS

ETC.COMPLETE AND PAINTING OF FABRICATED

MATERIALS USED ON THE POLES AND

NUMBERING OF POLE WITHOUT COST OF NUTS &

BOLTS, PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDING ERECTION OF

GUY SETS AND EARTHING (WITHOUT AB

30 ERECTION OF COIL TYPE/ CI PLATE TYPE NO 30 579

EARTHING INCLUDING COST OF COAL SALT ETC

WITHOUT COST OF NUTS & BOLTS BUT

WITHOUT COST OF GI WIRE AS PER STANDARD &

SPECIFICATION ( 10 KG SALT+10 KG COAL)

Signature of Contractor & seal

Division Office: Kalol, Mahendra Mill Road, Kalol (N.G)-382721, Telephone : (02764)223773

E-Mail:- [email protected] Website: www.ugvcl.com

Save Energy for Benefit of Self and Nation

SINGLE LOGO LETTERHEAD

31 Strip type Earthing of XLPE Cable by providing and NO 40 1986

fixing 25*3 mm GI hot dip strip of total length of stip -

Mtr,300*300*10 mm CI earthing plate, 2'' PVC Pipe of

Mtr length; providing of wood charcoal (25 KG Appx.)

and salt cubes ( 25 KG Appx.) or bentonite powder (50

KG Appx.) with material. Earthing shall be as per REC

standard and specifications.

32 ERECTION OF DOUBLE POLE STRUCTURE WITH NO 15 3042

MOUNTING OFAB SWITCH,HG FUSES OF 8 MTRS

200 KG PSC POLESINCLUDING EXCAVATION OF

PITS AND REFILLING OF EARTH,FIXING OF

CHANNELS SUPPORTING ANGLES, CLAMPS,

ANTI-CLIMBING DEVICES, DANGER BOARDS,

INSULATORS, DOFUSES ETC. COMPLETE AND

PAINTING OF FABRICATED MATERIALS USED ON

THE POLES AND NUMBERING WITHOUT COSTOF

NUTS & BOLTS,PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDINGOF ERECTION

OF GUY SET AND EARTHING.

33 Labour Welfare cess @ 1% No 1 39956

Executive Engineer

Signature of Contractor & seal

Division Office: Kalol, Mahendra Mill Road, Kalol (N.G)-382721, Telephone : (02764)223773

E-Mail:- [email protected] Website: www.ugvcl.com