Construction of B type - 5 Units and C type - 5 Units Quarters Ta. Khedbrahma Dist. Sabarkantha.

Name of work :- Construction of B type - 5 Units and C type -

Units Quarters Ta. Khedbrahma Dist.

Bill of Quantities

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

1 Excavation for foundation upto 1.5 m depth including 736.90 Cum 157.08

sorting out and stacking of useful materials and disposing

off the excavated stuff upto 50 Meter lead.(B) Dense or

2 Excavation for foundation for depth from 1.5 m to 3.0 m 210.30 Cum 170.40

including sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter lead.(B)

Dense or Hard soil

3 Filling available excavated earth (excluding rock) in 925.00 Cum 136.92

trenches. plinth, sides of foundations etc. in layers not

exceeding 20 cm. in depth consolidating each disposited

layer by ramming and watering.

4 Filling in plinth with sand under floors including watering 43.00 Cum 481.81

ramming, consolidating and dressing complete

5 Filling in foundation and plinth with murrum or selected soil 88.00 Cum 294.39

in layers of 20cm. thickness including watering, ramming

and consolidating etc. complete.

6 Providing and laying controlled cement concrete M.150 for 194.00 Cum 4327.85

curing complete including cost of formwork but excluding

the cost of reinforcement for reinforced concrete work in (A)

Foundations, footings,Base of columns and Mass concrete

7 Providing and laying controlled cement concrete M.250 and 230.00 Cum 4648.23

curing complete including cost of formwork but excluding

the cost of reinforcement for reinforced concrete work in (A)

Foundations, footings, Base of columns and Mass concrete.

8 Providing and laying controlled cement concrete M250 and 26.00 Cum 8242.61

curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced concrete

work in Columns, pillars posts and struts Column Up to

9 Providing and laying cement concrete 1:4:8 (1- Cement : 4- 15.00 Cum 2956.07

coarse sand : 8- Machine Crushed stone aggregates 40 mm

nominal size) and curing complete excluding cost of

formwork in (A) Foundation and Plinth

10 Providing and laying controlled cement concrete M.250 and 73.00 Cum 5995.36

curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced concrete

work for Ground and Plinth Beams

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

11 Providing and laying controlled cement concrete M.200 and 82.00 Cum 8203.27

curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced concrete

work in Columns, Pillars posts and struts, For All Floors.

12 Providing and laying controlled cement concrete M.200 and 17.00 Cum 11670.74

curing complete including the cost of formwork (Vertical

fins and vertical sun breakers.) and reinforcement for

reinforced concrete work in (B) Walls, for all floor level

13 Providing and laying controlled cement concrete M.200 and 79.00 Cum 6011.16

curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced concrete

work in Beams For All Floors.

14 Providing and laying controlled cement concrete M.200 and 115.00 Cum 6975.74

curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced concrete

work in Slab for All Floors.

15 Providing and laying controlled cement concrete M.200 and 17.00 Cum 6341.44

curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced concrete

work in Lintels For All Floors.

16 Providing and laying controlled cement concrete M.250 and 16.00 Cum 6993.10

curing complete excluding the cost of formwork and

reinforcement for reinforced concrete work in (E) Staircases

17 Providing TMT Bar FE 500D reinforcement for R.C.C. 82410.00 Kg. 77.29

work including bending, binding and placing in position

complete for All Floor

18 Brick work using Common Burnt Clay building bricks 334.00 Cum 4527.81

having crushing strength not less than 35 kg./Sq.Cm. in

Super structure Above plinth level up to All Floor levels in

Cement Mortar 1:6 (1- Cement : 6 -fine sand)

19 Half brick masonry in common burnt clay building bricks 419.00 Sqmt 688.93

having crushing strength not less than 35 Kg/Sq.Cm. in

Superstructure above plinth level upto All Floor level in

Cement mortar 1:4 (1- Cement : 4 -coarse sand )

(Conventional).

20 Providing & Fixing Chicken mesh for joint between brick 320.00 Sqmt 173.72

work & RCC work fixing with nail & GI washer as per

director in charge

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

21 Providing 15mm thick cement mala plaster in single coat on 2919.00 Sqmt 261.83

Rough (Similar)side of single or half brick walls for interior

plastering and finished even and smooth fininshing with a

floating coat of neat cement slurry in (i) Cement mortar 1:3

(1-cement:3-sand), 10x10 mm groves etc. Complete for All

22 Providing 10mm thick cement mala plaster in single coat on 1284.00 Sqmt 231.65

brick/concrete walls for interior plastering and finished even

and smooth fininshing with a floating coat of neat cement

slurry in (i)Cement mortar 1:3 (1-cement:3-sand). Complete

for All Floors.

23 20mm thick sand faced cement plaster with Gutka Finish on 1208.00 Sqmt 321.10

walls upto height 15 metres above ground level consisting of

12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand)

and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-

sand) with 5mm grooves, etc. complete.

24 Providing Water Proofing Treatment on Sunk Slab including 32.00 Sqmt 370.67

cement concrete flooring 1:2:4 (1-cement : 2-coarse sand : 4-

graded stone aggregate 20mm nominal size) laid in one layer

and finished with a floating coat of neat cement average

50mm thick to prepare slope including water proofing

chemical etc. Complete for Sunk Slab for All Floor.

25 Applying two coats of putty & two coats of primer of 3714.00 Sqmt 40.59

approved brand and manufacture on new wall surface to give

an even shade including thoroughly brushing the surface free

from mortar dropping and other foreign matter and sand

papered smooth.

26 Wall painting (three coats) with plastic emulsion paint of 2430.00 Sqmt 125.52

approved brand and manufacture on undecorated wall

surface to give an even shade including throughly brushing

the surface free from mortar droppings and other foreign

matter and sand papered smooth.

27 Ceiling painting (three coats) with plastic emulsion paint of 1284.00 Sqmt 131.02

approved brand and manufacture on ceiling and soffits of

slab surface to give an even shade including throughly

brushing the surface free from mortar droppings and other

foreign matter and sand papered smooth.

28 Finishing wall with weather proof exterior emulsion paint 1697.00 Sqmt 93.93

(two coats) with Damp Proof Coating (one coat) on wall

surface to give an required shape even shade after

thoroughly brushing the surface to remove all dirt, and

remains of loose powdered materials.etc complete

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

29 Providing and laying polished Blue Kota stone slab flooring 31.00 Sqmt 1019.00

over 20mm (Average) thick base of cement mortar 1:6 (1-

cement : 6-coarse sand) or L.M. 1:1.5 (1-Lime putty :1.5 -

coarse sand) laid over and jointed with grey cement slurry

mixed with pigment to match the shade of slab including

rubbing and polishing etc. complete. (A) 25mm thick

30 Providing and laying Ceramic tiles 6mm thick in skrting 47.00 Sqmt 1090.32

risers of steps and dedo on 10mm thick cement plaster 1:3 (1-

cement : 3-coarse sand) and jointed with white cement slurry

31 Providing and fixing pre-cast Rubber Dye / steel Dye inter 274.00 Sqmt 706.93

locking concrete block 60mm thick with grade of concrete

M300 pnumatic compressed / vibrated mechanically and as

per approved design Confirming to IS 15658 :

including 35 mm Sand layer for levelling and filling the joint

with sand in proper line and level as per guidlines of IRC :

SP 63-2018 etc. Complete.

32 Providing and fixing Machine cut & Polished Blue Kota 11.00 Sqmt 1355.42

stone in 7.5 cm width Strip flooring for Ramp even grade

over 20mm (Average) thick base of cement mortar 1:6 (1-

cement : 6-coarse sand) laid over and jointed with grey

cement slurry mixed with pigment to match the shade of slab

including rubbing and polishing etc. complete. (A) 25mm

33 P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 433.00 Sqmt 1346.35

mm (average) base of cement mortar 1:6 ( 1 cement:

coarse sand) on new surface or fixing on existing flooring by

adhesive material including dismentaling of existing

flooring and jointed with color cement slurry including

finised with flush pointing & cleaning the surface etc.

complete for DARK shade

34 Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 67.00 Sqmt 1195.02

24'' in skrting risers of steps and dedo on 10mm thick

cement plaster 1:3 (1-cement : 3-coarse sand) and jointed

with white cement slurry

35 P & L Mate Finished Antiskid Ceramic 10 mm thick tile 32.00 Sqmt 1266.54

flooring over 20 mm (average) base of cement mortar 1:6 (

cement: 6 coarse sand) on new surface or fixing on existing

flooring by adhesive material including dismentaling of

existing flooring and jointed with color cement slurry

including finised with flush pointing & cleaning the surface

36 Providing and laying coloured glazed tiles of the size 300 118.00 Sqmt 1487.88

mm x 450 mm x 8 mm in skirting, risers of steps and dedo

on 10 mm. thick cement plaster 1:3 (1 cement : 3 coarse

sand) & jointed with white cement slurry.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

37 Providing and fixing Machine cut, Free edges, Mirror 98.00 Sqmt 2464.40

Polished Granite stone slab flooring 18mm thick laid on

20mm (Average) thick base of cement mortar 1:6 (1-cement

: 6-coarse sand) for Trade & Riser including Half Round

moulding front edge of trade jointed with grey cement slurry

mixed with pigment to match the shade of slab including

rubbing and polishing etc. complete.

38 Providing and fixing Machine cut, Free edges, Polished 224.00 Sqmt 2510.86

Granite stone slab flooring 18mm thick for vertical

wall/Doors/Windows Sill, Jams for cladding as per design

including full moulded round inside edge and laid on10mm

thick base of cement mortar 1:3 (1-cement : 3-coarse sand)

jointed with grey cement slurry mixed with pigment to

match the shade of slab including rubbing and polishing etc.

39 Providing and fixing Machine cut Bothside mirror polished 2.00 Sqmt 618.12

kota stone in single piece (Max 150 cm long and width upto

45 cm with both side polished) for horizontal Shelves

including makng grooves & Fixing the same in Brick/

concrete wall finished with flush pointing, round open edge

40 Providing and laying water prooofing treatment with china 349.00 Sqmt 1132.21

mosaic tiles flooring over avg 50 mm C.C. 1:2:4 bedding

maintaining slope for plain and curve surface & 12 mm to

20 mm broken pieces not more than 2.5 cm of ceramic/ of

glazed tiles to be laid over cement mortar 1:3 to plain or

slope and to be tempered to bring mortar creme out upto

surface using white cement including rounding off junctions

and extending them upto 15 cm along the wall,clearing with

water and oxalic acid etc. as directed.

41 Constructing Sandwich Platform of 18mm thick polished 34.00 Sqmt 2760.33

black or selected granite at top and 25 mm thick kota stone

with 75cm height with necessary support using 20mm thick

cement mortar 1:3 for sandwich and fitting at bottom &

edges with waterproof rigid adhesive including making

necessary grooves in walls with vertical support of double

kota stonr sandwich every 60cm centre to centre including

all labour material of approved quality including full

moulded round front edge fixed in wall for partition.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

42 Providing and fixing flush door with Single shutters, solid 155.00 Sqmt 4211.70

core construction with frame of Anodized Alluminium

section (weight not less than 1.1 kg/mt.) with cross board

and finished with 1 mm thick laminate on both side of

shutter, machine glued PVC beading on periphery including

30cm long Stainless Steel Pipe handle on both side SS ASIS

304 grade, SS Stopper 20cm, SS Aldrop 30cm both side,

anodised alluminium butt hinges with necessary screws. (B)

Non-decorative type and block board core anodised

alluminium butt hinges in flush door shutters (2) 35 mm

43 Providing and fixing window having extruded aluminum 67.00 Sqmt 1744.27

Colour anodized section frame main outer size 95mm x

24mm x 1.17mm @ wt.of 0.738 Kg/mt , horizontal Three

track member size 92mm x 31.75mm x 1.30mm,@ Wt.1.07

Kg/mt , vertical member of size 92mm x 31.75mm x

1.50mm @ Wt. 1.06 Kg/mt with sliding shutters of

horizontal member size 40 mmx18mm x1.29mm @ wt.of

0.456 Kg/mt, vertical member of size 40mm x 18mm x

mm @ wt.of 0.456Kg/mt/ with 5 mm thick transparent

bronze colour tinted float glass with rubber gasket and

airlock strip anodiazed aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame as per details

etc. With Mosquito net shutter in outer track.

44 Providing and fixing Standard extruded colour anodized 8.00 Sqmt 1368.55

alluminium section frame weight 1.094 kg/Rmt.with

Adjectable Glass Louvers of 5 mm thick transparent glass

colour tinted float glass with transparent silicon gasket with

allu. Powder coated fittings & fixtures.

45 Providing & fixing M.S. Grill using 12 mm dia. M.S. Bars 64.00 Sqmt 1870.52

@ 15 cm C/C fixed in frame using angle 35mm x 6mm,

35mm x 6mm flat in center, and Galvanized wire mesh jali

20mm x 20mm spacing, including red lead primer coat and

two coats of oil painting etc. complete.

46 Providing erecting and fixing double coated ISI water tank 12000.00 Litre 3.95

of required capacity each with all necessary fittings and

connection etc. complete on terrace

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

47 Providing, laying and jointing in true line and level 110 590.00 Rmt 876.12

diameter U.P.V.C (Type B) conforming to IS 13592-1992

with one end plain and other end socketed with rubber ring,

& fittings conforming to ISI 14735-1999 of approved make

for drainage system pipe line, pipe shall be jointed with each

other with rubber lubricant, pipe shall be fixed on wall using

of PVC clamp of the size 110 mm diametre x 149 mm

length x 145 mm heigh at every 2000 mm center to center or

shall be concealed in walls as directed including necessary

fittings such as bends, shoes etc. including testing of pipes

and joints and jointed with adhesive solvent cement

including cost of all materials.

48 Providing, laying and jointing in true line and level 160 108.00 Rmt 834.38

diameter U.P.V.C (Type B) conforming to IS 13592-1992

with one end plain and other end socketed with rubber ring,

& fittings conforming to ISI 14735-1999 of approved make

for drainage system pipe line, pipe shall be jointed with each

other with rubber lubricant, pipe shall be fixed on wall using

of PVC clamp of the size 160 mm diametre x 210 mm

length x 196 mm heigh at every 2000 mm center to center or

shall be concealed in walls as directed including necessary

fittings such as bends, shoes etc. including testing of pipes

and joints and jointed with adhesive solvent cement

including cost of all materials.

49 Providing laying and jointing in true line and level 40mm 300.00 Rmt 148.12

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two metre

C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all

materials. laying and jointing in true line and level 25mm

50 Providing 100.00 Rmt 91.84

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two metre

C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all

materials. laying and jointing in true line and level 15mm

51 Providing 250.00 Rmt 72.65

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two metre

C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

52 Providing and fixing concealed center point to wall ceiling 200.00 Rmt 253.82

& floor CPVC (SDR 13.5) PIPE having National Sanitation

Foundation (NSF) seal for potable water of following dia.

nominal bore tube fittings and clamps including making

good the wall, ceiling and floor etc. complete. 25 mm.

53 Providing and fixing concealed center point to wall ceiling 40.00 Rmt 170.36

& floor CPVC (SDR 13.5) PIPE having National Sanitation

Foundation (NSF) seal for potable water of following dia.

nominal bore tube fittings and clamps including making

good the wall, ceiling and floor etc. complete. 15 mm.

54 Providing and fixing Gun metal check or non-return fullway 24.00 Nos. 663.43

wheel valve.(E) 40mm dia.

55 Providing and fixing ball cock of approved. quality as 4.00 Nos. 189.84

directed.(A) Copper Metal (ii) 50mm dia.

56 Providing and fixing C.P. brass shower rose with 15mm or 10.00 Nos. 282.16

20mm inlet.(A) 100mm dia. Each

57 Providing and fixing water closet squatting Pan (Indian type 10.00 Nos. 1637.50

W.C. Pan) size 580mm (Earthwork, bed concrete, foot reste

and trap to be measured and paid for separately) (A)

Vitreous China.(I) Long pattern = White colour including

100mm size P or S trap for water closet squatting pan

including jointing the trap with the pan and soil pipe in

cement Mortar 1:1 (1-Cement : 1-Fine sand) with 25mm dia.

chromium plated brass half trun flush cock of approved

quality including fixing in pipe line xing G.I. inlet

connection for flush pipe with W.C. Pan etc. complete.

58 Providing and fixing washbasin (ii) Flat Back washbasin 10.00 Nos. 2180.72

550 mm x v 400mm size. (i) In white colour including with

approved sanitary grade material with CP waste coupling,

waste pipe, 15mm dia Pillar & Stop Cock of approved brand

with connection 15mm dia flexiable pvc pipe etc. complete

59 Providing and fixing Kitchen sink with C.I. or M.S. 10.00 Nos. 2987.87

brackets, painted white including cutting holes in walls (C)

Vitreous China Sink.(i) 600mm x 450mm x 150mm size

including approved sanitary grade material with CP waste

coupling, waste pipe, 15mm dia Pillar & Stop Cock of

approved brand with connection 15mm dia flexiable pvc

pipe etc. complete

60 Providing and fixing brass screw down stop tap.(A) 15mm 42.00 Nos. 205.83

61 Providing and fixing PVC SWR Nahni trap IS 14735 for 40.00 Nos. 586.60

drain - 100 mm diameter with jali of the following nominal

diameter of self cleansing design with C.I scread down or

hinged grating including the cost of cutting and making good

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

62 Providing and fixing S.W. gully trap with C.I. grating brick 20.00 Nos. 1246.92

masonry chamber and water tight C.I. cover with frame of

300mm x 300mm size (inside) with standard weight.(i)

Square mouth traps.(B) 150mm x 100mm size P or R type

63 Providing and fixing C.P. brass towel rail comlete with C.P. 20.00 Nos. 616.42

brass brackets fixed to wooden plugs with C.P. brass

scews.(B) 600mm x 20mm size.

64 Providing and fixing 600mm x 450mm bevelled edge mirror 10.00 Nos. 859.41

of superior glass mounted on 6mm thick A.C. sheet or

plywood sheet and fixing to wooden pluge with C.P. brass

screws and washers.

65 Providing and fixing in position PVC cowel went to pipes 8.00 Nos. 101.00

66 Constructing brick masonry chamber for underground C.I. 14.00 Nos. 3660.76

Inspection chamber and bends with bricks having crushing

strength not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover with

frame (Light duty) 455mm x 610mm intenal dimensions

total weight of cover with frame to be not less than 38Kg.

(Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top

slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded

stone aggregate 20mm size) foundation concrete 1:5:10

inside plaster 15mm thick with cement mortar 1:3 finished

smooth with a floating coat of neat cement on walls and bed

concrete etc. complete.(ii) Inside dimensions 500mm x

mm and 450mm deep for pipe line with one or two inlets.

67 Providing sock pit of 5.00 Cu.M. Volume including 4.00 Nos. 3445.18

excavating and filling brickbats with dry masonry work at

top for 45cm. height including covering the top with stone

including providing vatas in C.M. 1:3 with finishing curing

etc. complete as directed.

68 Applying general insecticide pest control treatment to floors, 379.00 Sqmt 80.62

cupboards etc including labour materials etc. complete.

Using Imidacloprid 30.5 SCas Per IS 6313 part -II( (0.075%

concentration by mass) is recommended 10.5ml chemical

diluted with 5 liters of water application 0.5 litre chemical

/Sqm of surface is recommended as per I.S.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

69 Providing and fixing 90 cm high Stainless Steel railing made 108.00 Rmt 3760.33

from anticorrosive 304 grade S.S. pipe of 50 mm dia. (16

gauge) as hand rail with S.S.304 grade baluster of 32 mm

dia (16 gauge) as a vertical support fixed in RCC Slab/ steps

of stair at 1.2 mt. c/c including three horizontal S.S. pipes of

16 mm dia (16 gauge) at equal distance fixed by 16 mm dia

(16 gauge) S.S. pipe with baluster including accessories as

per detailed drawing as directwed etc. complete

70 Steel work, welded in built up sections framed work 72.00 Quintal 9108.49

including cutting, hoisting, fixing in position and applying a

priming coat of red lead paint. (A)In beams and joists,

channels angles Tees, flats, with connecting plates or angle

cleats as in main and cross beams. Hip and jack rafters,

purlins conneted to common rafters and the like

71 Painting two coats (excluding priming coat) on external 37.00 Sqmt 22.75

surface of new rain water, soil, waste and vent pipes and

fittings with ready mixed bituminous brushing, black,

anticorrosive to give an even shade including cleaning of

all dirt, dust and other foreign matter. (B) 75mm dia.

72 Brick work using common burnt clay building bricks having 73.00 Cum 4214.33

crushing strength not less than 35 kg./Sq.Cm. in foundation

and plinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand)

73 Demolition of Brick work and stone masonry including 52.00 Cum 562.85

stacking of serviceable materilas and disposal of

unserviceable materials with all lead and lift.(ii) In Cement

74 Dismentaling of sheet roofing including ridges, 58.00 Sqmt 49.18

Hips,Valleys, Gutters etc. stacking of serviceable materilas

and disposal of unserviceable materials with all lead and

lift.(i) G.I.sheet roofing.

75 Dismentling steel work including distempering and stacking 689.00 Kg 3.81

the materials with all lead and lift.

76 Providing and laying controlled cement concrete M.150 and 8.00 Cum 7426.53

curing complete excluding the cost of formwork and

reinforcement for reinforced concrete work for Coping

77 Providing & laying weep hole in Aburtments, and returns by 440.00 Each 86.73

using A.C. pipe of 100mm including laying in proper grede

and jointing the completed as per detailed specification.

78 Providing and fixing Safety Grills of required pattern for 2045.00 Kg 110.60

windows/door using MS polished bars, Rectangular CRS

Pipes of size 50mm x 30mm x 2mm or Required at required

spacing as per design and hold fast with coach bolts

including one coat of and two coats of matt finished oil

painting etc. complete

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

79 Drilling of pilot bore hole of size 250/300 mm diameter at 300.00 Rmt 1544.29

above site by mud finish direct rotary rig etc. complete

80 Reaming of 250/300 mm diameter pilot bore hole to size 250.00 Rmt 742.35

450 mm diameter including assembling, lowering housing,

casing strainer pipes with gravel packing and clay ball

packing etc. complete.

81 Providing 600 CFM / 150 PSI capacity air compressor upto 1.00 Job 25118.70

available of sand free discharge ( Minimum 6.0 Hours)

82 Supply of reducer made frim 6 mm thick plate (M.S.) for 1.00 Nos. 2009.90

ERW pipe of size (ii) 200 mm dia. x 250 mm dia. X

83 Supply of 200 mm diameter V-wire screen pipe of slot size 90.00 Rmt 1401.88

1.0 mm nominal hole etc. complete.

84 Supply of M.S. Bore clamps with 3 holes on either side with 1.00 Pair 1753.36

nuts and bolts of standard make and suitable size (g)

mm x 75 mm x 16 mm flat to 200 mm dia. Pipe.

85 Supply of Bore Plug having 100 mm height made from M.S. 1.00 Nos. 834.26

plate with 3 holes at equal distance on circumference for

nuts-bolts type, locking arrangement with nut-bolts & lock

nuts of standard make complete. (b) from 5 mm thick M.S.

plate (for top also) (ii) suitable for 200 mm dia. pipe.

86 Supply of M.S. Bail Plug having length of 0.45 mtr from 1.00 Nos. 907.99

medium class pipe as per I.S.S. suitable for (b) 200 mm

diameter pipe etc. complete.

87 Supply of Steel Bent plates suitable to ERW pipe for (b) 200 8.00 Nos. 71.71

mm diameter and 150 x 150 x 6 mm size etc. complete.

88 Supply of Gravel of size selected size up to 4mm to 6 mm, 6.00 Cmt 2295.73

including stacking and filing etc. complete.

89 Charges for uptron make Electrologger (with carting ) of 1.00 Job 12120.00

pilot bore hole etc. complete.

90 Charges for Geo Hydrological ground water investigation 5.00 Job 16160.00

including water sample chemical analysis etc. complete.

91 S.I.T.C. submersible pump set suitable for bore of 150 mm 1.00 Each 49148.62

dia or more having 3 phase motor capacity not less than

HP with following capacity. Lifting and Lowering taken

extra. [C] 25 stage 160 to 100 LPM discharge at 185 to

mtr head for 50 mm dia delivery pipe

92 Providing and erecting PVC corrugated Flexible conduit 125.00 Rmt 26.26

with required numbers of coupling, PVC bushes, Check-nuts

etc. complete of following sizes. (3) 32 mm diameter

93 Lowering of submersible motor pump set complete with 1.00 Job 2568.43

required. Nos. and size of casing pipes erected by means of

proper chain pulley block & pipe wrenches after checking of

threads of each pipe with coupling to take the load of the

pump set and pipe assembly filled up with water. (B) Above

60 mtr and up to 120 mtr

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

94 Supplying and erecting approved make motor control 1.00 Each 8710.24

cubical panel (Direct - on - line) made from 16 G. CRCA

sheet duly epoxy powder painted inside and outside with

hinged doors and locking, arrangement consisting of suitable

size of ON-OFF isolator (AC - 3/23 duty) main fuses, single

phasing preventer, indicating lamps for R-Y-B phases,

overload relay, automatic water level controller, Ammeter,

Voltmeter each with two way selector switch incoming,

wires duly socket crimped, main contactor & overload relay,

start-stop push buttons, to be erected on angle iron frame

grouted on wall as directed. The isolator, overload relay &

contactors will be of L&T, Seimens or BCH make only (a)

DOL upto 7.50 H.P.

95 Supplying and erecting XLPE (IS:7098) (I)-88 ISI 250.00 Rmt 136.35

unarmoured copper cable 1.1 KV grade to be erected as

directed of following size. (E) 3 core 2.5 Sq. mm

96 Providing laying and jointing in true line and level 50mm 150.00 Rmt 195.67

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two metre

C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all

materials. and fixing butterfly valve of IS approved brand

97 Providing 2.00 Nos. 1595.80

98 Providing and laying controlled cement concrete M.200 and 1.00 Cum 6979.86

curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced concrete

work in Chajja For All Floors.

99 Providing and laying polished Blue kota stone slab 25mm 12.00 Sqmt 1166.93

thick in risers of steps,skirting Dedo and pillars laid on

10mm thick cement mortar 1:3 (1-Cement : 3 coarse sand)

and jointed with gray cement slury mixed with pigment to

match the shade of slab including rubbing and polishing etc.

100 Providing and fixing C.I. Manhole cover 0.60 M. x 0.45M. 5.00 Nos 958.17

size having weight not less than 35Kg.

101 Clearing and grubbing road land including uprooting rank 1.00 Hectare 28455.10

vegetation grass bushes, shrubs, sapling and trees girth up to

300 mm removal of stumps of trees cut earlier and disposal

of unserviceable materials (C) By mechanical means in area

of light jungle

102 Earthwork in cutting including preparing the slope and 18.00 Cum 260.57

camber and stacking or utilising the cutting stuff in bank as

directed upto 200 Meters from the end of cutting with all

lead and lift.(i) Hard murrum.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

103 Earthwork for embankment including breaking clods, 1266.00 Cum 131.93

dressing with all lead and lift (including watering and

consolidation)(A) From Borrow pits within land width

104 Rolling and consolidation of soling including filling in 3728.00 Sqmt. 22.75

depression which occur during the process, with power roler

8 tonne to 12 tonne..

105 Compaction and finishing of cement concrete road by trimix 760.00 Sqmt 72.72

process providing extra labour charges for the trimix vaccum

dewatering service process on cement concrete road surface

by using vaccum dewatering pump floater surface vibrator

including making rough finish to surface as per in including

levelling the complete.

106 Box cutting the road surface to proper slope and camber for 170.00 Cum 109.05

making a base for road work including removing the

excavated stuff and depositing on the road side slope as

directed upto 50Mt.lead.

107 Construction of B.I.T.C. granular sub base by providing 170.00 Cum 1604.24

granular material of Grading II, spreading in uniform layers

with motor grader on prepared surface , mixing by mix in

place method with front end loader at OMC , and

compacting with vibratory roller to achieve the desired

density ,complete as per Clause

108 Providing, laying, spreading and compacting stone 123.00 Cum 2102.11

aggregates of specific sizes to water bound macadam (Grade-

II) (B.T. Metal of size 45 to 63 mm) specification including

spreading in uniform thickness, hand packing, rolling with

wheeled steel/ vibratory roller in stages to proper grade and

camber, applying and brooming requisite type of screening/

binding Materials to fill up the interstices of coarse

aggregate, watering and compacting to the required density.

109 Supplying and fixing reinforced concrete heavy duty non- 50.00 Rmt. 660.00

pressure pipes with collars for culverts carrying heavy traffic

as per IS 458-1991 specifications including setting the pipes

in C.M. 1:2 watering and laying (to level or slopes) of class

NP3 of following internal daimeters.(i) 300mm dia.

110 Constructing Brick masonry road gully chamber 500mm x 20.00 Nos. 2017.20

450mm x 600mm including 500mm x 450mm C.I.

horizontal grating wih frame complete.

111 Providing and fixing pre-cast concrete kerb stone of gray 267.00 Rmt 404.06

cement based concrete block 30cm length,30cm height and

15cm thick of M200 grade concret as per approved design

and including excavation for fixing in proper line and

Level,filling the joint with C:M 1:3 (1cement:3fine sand) etc

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

112 Supplying of yellow or Goradu soil with all lead and lift 202.00 Cum 505.00

including spreading watering dressing and rolling with hand

roller etc complete selected soil

113 Supplying of well rotted FYM manure with all lead and lift 11.00 Cum 378.75

including spreading mixing dressing and rolling with hand

roller etc. complete

114 Scarifying the surface of soil including spreading of DAP 672.00 Sqmt. 26.26

fertilizer mixing with soil properly leveling ground dressing

115 Supplying and planting Dibbling semi carpet lawn at 672.00 Sqmt. 90.90

distance of about 15 cm x 15 cm after proper anti termite

treatment and rolling the same by hand roller and watering

116 Bowling and developing flowering plants grown in nursery 20.00 Nos. 505.00

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Bottom Palm

117 Bowling and developing flowering plants grown in nursery 10.00 Nos. 656.50

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Triangle Palm

118 Bowling and developing flowering plants grown in nursery 30.00 Nos. 80.80

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Jasud

119 Bowling and developing flowering plants grown in nursery 20.00 Nos. 85.85

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Croton

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

120 Bowling and developing flowering plants grown in nursery 25.00 Nos. 85.85

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Croton

121 Bowling and developing flowering plants grown in nursery 15.00 Nos. 70.70

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Croton Petra

122 Bowling and developing flowering plants grown in nursery 15.00 Nos. 40.40

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Croton Petra Live Plant

123 Bowling and developing flowering plants grown in nursery 20.00 Nos. 101.00

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Golden Durenta Varigated

124 Bowling and developing flowering plants grown in nursery 30.00 Nos. 85.85

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Crotons Variety

125 Bowling and developing flowering plants grown in nursery 150.00 Nos. 35.35

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Green Mahindi

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

126 Bowling and developing flowering plants grown in nursery 40.00 Nos. 85.85

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Varigated Ficus

127 Bowling and developing flowering plants grown in nursery 35.00 Nos. 70.70

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted New Black Ficus

128 Bowling and developing flowering plants grown in nursery 10.00 Nos. 45.45

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted White Ribbon Plants

129 Bowling and developing flowering plants grown in nursery 200.00 Nos. 60.60

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Green Mahendi border

130 Bowling and developing flowering plants grown in nursery 20.00 Nos. 95.95

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Pendulla Asopalav

131 Bowling and developing flowering plants grown in nursery 50.00 Nos. 121.20

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Potted Plants

132 Labour charges for planting various plantsafler proper anti- 690.00 Nos. 70.70

termite treatment in pits including placing properly and

filling the pits with required prepared mix soil and watering

and dispporting etc. complete

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

133 Maintance of the garden for 60 days after Complition of 3 1.00 Job 25250.00

month stipulated period is completed for plantation of lawn

and plants including applying second round of proper anti-

termite treatment

134 Rubber Hose Pipe 15 mm dia of approved brand and make 100.00 Rmt 90.90

135 Providing and fixing G.I. Nipple as directed 50.00 Nos. 50.50

136 Excavation for foundation upto 1.5 m depth including 75.00 Cum 122.99

sorting out and stacking of useful materials and disposing

off the excavated stuff upto 50 Meter lead.(A) Loose or soft

137 Providing & Laying Rain Water Junction Chamber of Clear 15.00 Nos. 6241.80

Internal Size 0.60 x 0.60 x 0.75m with excavation of size

1.36 x 1.36m & 0.15m thick M200 Bed Concrete Including

brick masonary 0.23 thick wall in C.M. 1:6 of 0.75m height

with 15mm thick Cement Plaster inside & outside (1:4),

1.06 x 1.06 RCC M200 top slab of thickness 0.15m with

TMT steel and 455mm x 610mm cast iron manhole cover

with frame weight not less than 35 kg as per directed by

Engineer-in-charge.

138 Providing & Laying Filter chamber of brickwork 0.23 thick 15.00 Nos. 22067.49

in C.M. 1:6 of clear internal size 2.04m x 1.20m x 1.20m

and excavation dimension of 2.80m x 1.96m x 1.35m

including C.C. M200 Bed Concrete 0.15m thick and RCC

M200 Top slab of thickness 0.15m with TMT steel,

Including 15mm (1:4) thick cement plaster inside & outside

with Cement slurry & top cover with frame of minimum

weight of 35kg, including filling filter material of 200mm

thick each layer of 25-40mm, 10-20mm of BT metal and

sand as per directed by engineer-in-charge

139 Providing & Laying Water Harvesting Pit of clear size 2.00 1.00 Nos. 32558.36

mt x 2.00 mt x 4.00 mt. For water logging with excavation

in any strata upto four meter depth, Brick work 0.23 thick in

C.M. 1:6 of clear internal size 2.00m x 2.00m x 1.20m with

15mm thick C.M. 1:4 plaster, filling the pit with B.T. metal

40mm in 0.60 mt. depth with 25-40mm kaptchi, 0.30 mt.

depth and 2mt. depth with coarse sand in layers including

makng P.V.C. line for water inlet etc. as directed with

250mm dia bore 15mt. depth amd 150mm dia PVC pipe of

10 Kg.f/cm2 casing wih gravel packing or as directed.

140 A Pump Room. Supply & fixing Diesel engine driven min. 2.00 Nos. 555500.00

pump of S5 mt. head and 137 M3/ Hr. capacity with

RPM diesel engine with battery charger. Base plate, AVM

pad etc. complete as directed including necessary concrete

platform as directed. (Make:-L)

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

141 Fire Pumps & Accessories, Yard Hydrant, Internal Hydrant, 2.00 Nos. 153924.00

Hose Reel & Sprinkler System Supply, Installation, Testing

& Commisioning of Main Fire Pump Of Capacity 20 H.P.

with 55 mtr. Head, Pump

142 Supply, Installation, Testing & Commisioning of control 2.00 Nos. 90900.00

Panel suitable for automatic operation of fire fighting pumps

consisting (a) Necessary cabling, wiring, earthing from panel

to individual equipment shall be included in the quoted

price. (b) Facility for more selection i.e. auto or manual. (c)

Protection failure and control cabling. (d) Interlocking of

pressure switch with pumps.

143 Supply, Installation, Testing & Commisioning of 150mm 2.00 Nos. 3535.00

dia. Pressure Gauge of range 0 - 15 kg/cm3 confirming to as

per specification complete as required.

144 Supply, Installation, Testing & Commisioning of Pressure 2.00 Nos. 4545.00

Switches for automation of fire pumps, Pressure switches

shall be double pole, single throw type suitable for 3 phase

supply with diaphragm. Alluminium Enclosure with IP

protection as required.

145 Supply, Installation, Testing & Commisioning of the 40.00 meter 2390.67

following sizes of flanges jointed / screwed / welded, M.S.

Pipes of Class C ISI marked including accessories such as

MS bracket, U clamps with Anchor Fasteners, tees / elbows

/ reducers / couplings / unions / bends / flanges etc. and

laying on the surface including painting with two coats of

anticorrosive primer and two coats of approved red enamel

paint after laying and testing after installation etc. as per

specifications complete as required. a) 150 mm dia.

146 Supply, Installation, Testing & Commisioning of the 50.00 meter 1711.95

following sizes of flanges jointed / screwed / welded, M.S.

Pipes of Class C ISI marked including accessories such as

MS bracket, U clamps with Anchor Fasteners, tees / elbows

/ reducers / couplings / unions / bends / flanges etc. and

laying on the surface including painting with two coats of

anticorrosive primer and two coats of approved red enamel

paint after laying and testing after installation etc. as per

specifications complete as required. b) 100 mm dia.

147 Supply, Installation, Testing & Commisioning of the 10.00 meter 1277.65

following sizes of flanges jointed / screwed / welded, M.S.

Pipes of Class C ISI marked including accessories such as

MS bracket, U clamps with Anchor Fasteners, tees / elbows

/ reducers / couplings / unions / bends / flanges etc. and

laying on the surface including painting with two coats of

anticorrosive primer and two coats of approved red enamel

paint after laying and testing after installation etc. as per

specifications complete as required. c) 80 mm dia.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

148 Supply, Installation, Testing & Commisioning of the 50.00 meter 1100.90

following sizes of flanges jointed / screwed / welded, M.S.

Pipes of Class C ISI marked including accessories such as

MS bracket, U clamps with Anchor Fasteners, tees / elbows

/ reducers / couplings / unions / bends / flanges etc. and

laying on the surface including painting with two coats of

anticorrosive primer and two coats of approved red enamel

paint after laying and testing after installation etc. as per

specifications complete as required. d) 65 mm dia.

149 Supply, Installation, Testing & Commisioning of the 50.00 meter 989.80

following sizes of flanges jointed / screwed / welded, M.S.

Pipes of Class C ISI marked including accessories such as

MS bracket, U clamps with Anchor Fasteners, tees / elbows

/ reducers / couplings / unions / bends / flanges etc. and

laying on the surface including painting with two coats of

anticorrosive primer and two coats of approved red enamel

paint after laying and testing after installation etc. as per

specifications complete as required. e) 50 mm dia.

150 Supply, Installation, Testing & Commisioning of the 40.00 meter 858.50

following sizes of flanges jointed / screwed / welded, M.S.

Pipes of Class C ISI marked including accessories such as

MS bracket, U clamps with Anchor Fasteners, tees / elbows

/ reducers / couplings / unions / bends / flanges etc. and

laying on the surface including painting with two coats of

anticorrosive primer and two coats of approved red enamel

paint after laying and testing after installation etc. as per

specifications complete as required. f) 32 mm dia.

151 Supply, Installation, Testing & Commisioning of the 150.00 meter 555.50

following sizes of flanges jointed / screwed / welded, M.S.

Pipes of Class C ISI marked including accessories such as

MS bracket, U clamps with Anchor Fasteners, tees / elbows

/ reducers / couplings / unions / bends / flanges etc. and

laying on the surface including painting with two coats of

anticorrosive primer and two coats of approved red enamel

paint after laying and testing after installation etc. as per

specifications complete as required. g) 25 mm dia.

152 Supply, Installation, Testing & Commisioning of C.I. 4.00 Nos. 9738.42

Butterfly valve (PN 1.6) with flanges, nut bolts, gaskets

complete as required. a) 150 mm dia.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

153 Supply, Installation, Testing & Commisioning of C.I. 8.00 Nos. 8932.44

Butterfly valve (PN 1.6) with flanges, nut bolts, gaskets

complete as required. b) 100 mm dia.

154 Supply, Installation, Testing & Commisioning of C.I. 8.00 Nos. 5555.00

Butterfly valve (PN 1.6) with flanges, nut bolts, gaskets

complete as required. d) 50 mm dia.

155 Supply, Installation, Testing & Commisioning of Cast iron 2.00 Nos. 9090.00

Dual plate Check valve (PN 1.6) a) 150 mm dia.

156 Supply, Installation, Testing & Commisioning of Cast iron 4.00 Nos. 7564.90

Dual plate Check valve (PN 1.6) b) 100 mm dia.

157 Supply, Installation, Testing & Commisioning S.S. Single 12.00 Nos. 5656.00

Headed Fire Hydrant Valve with 80mm N.B. Flanged inlet,

63 mm dia. Female instantaneous outlet type S.S. coupling,

blank cap, chain, twist release type lug & all accessories

Confirming to IS:5290. Including fixing with supports,

flanged tapping from wet riser, orifice plate.

158 Supply, Installation, Testing & Commisioning of Weather 6.00 Nos. 4595.50

proof standard M.S. Fire Hose Cabinet wall mounting type

(450mm x 450mm x 250mm deep) having single or double

opening with necessary locking arrangement by allan key

suitable for housing 1 nos. hose pipe, 1 nos. Branch pipe &

nozzle spanner.

159 Supply, Installation, Testing & Commisioning non 6.00 Nos. 5641.86

percolating rubber reinforced lined Fire Hose pipe (as per

IS:636) of 63mm dia and 15 mtr. Long. The hose shall be

rated for burst pressure pf 35.7kg/sqcm. Hose shall be

complete with ISI marked SS male & female coupling

(IS:903) bound & riveted to hose pipe with copper rivets &

1.5mm copper wire.

160 Supply, Installation, Testing & Commisioning of 63mm dia. 6.00 Nos. 5641.86

Instantaneous pattern SS 304, short branch pipe, 20mm dia

nozzle confirming to IS

161 Supply, Installation, Testing & Commisioning of First Aid 6.00 Nos. 6565.00

Hose Reel equipment conforming to 15:884 comprising of

hose reel drum, 8 mm shut off noz:z.le, Ru bber hose of

mm dia x 30 mtr. long, painting, swinging type fixing

bracket, anchor fastener, bolts & nuts etc.

162 Supply, Installation, Testing & Commisioning of SS Ball 6.00 Nos. 858.50

Valve. A) 25mm dia.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

163 Supply, Installation, Testing & Commisioning of Cast Iron 2 2.00 Nos. 8585.00

Way Fire Brigade Inlet as per 1S: 904 having 63 mm dia

in/et with blank cap and chain with necessary fit ti ngs,

flanges, nut bolts etc. complete as required. (For Hydrant

164 Supply, Installation, Testing & Commisioning of Gun Metal 2.00 Nos. 959.50

Air Release Valve with necessary fittings. Size: 25mm (For

165 Supply, Installation, Testing & Commisioning of Quartzoid 70.00 Nos. 454.50

Bulb type Sprinkler Heads. A) Pendent Sprinkler 57°C

166 Fire Alarm System Alarm panel Microprocessor based 8 2.00 Nos. 16665.00

167 Manual Call Point 6.00 Nos. 454.50

168 2 core x 1.5 sqmm wire with pvc conduct and required 200.00 Rmt. 166.65

169 Smoke Detector 20.00 Nos. 1565.50

170 II) Fire Extinguisher and Exit Signages Supply, installlation, 6.00 Nos. 6447.84

testing and commissioning of Carbon Dioxide (CO2) type

Fire Extinguisher of 4.5 kg confirm to IS:15683, with ISI

marked / TAC approved fitted with required accessories

including wall suspension brakets.

171 Supply, Installation, Testing & Commisioning of ABC type 6.00 Nos. 2222.00

6kg confirm IS:15683, with ISI marked / TAC approved

fitted with required accessories including wall suspension

172 Signage Boards 6.00 Nos. 252.50

173 Excavation for foundation upto 1.5 m depth including 80.00 Cum 272.57

sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter lead.(B)

Dense or Hard soil

174 Excavation for foundation for depth from 1.5 m to 3.0 m 27.00 Cum 498.93

including sorting out and stacking of useful materials

and disposing of the excavated stuff upto 50 Meter

lead.(C) Hard Murrum

175 Providing and laying cement concrete 1:5:10 (1- Cement : 5- 6.00 Cum 2566.77

fine sand : 10- graded brick bat aggregates 40mm nominal

size) and curing complete excluding cost of formwork in (A)

Foundation and Plinth

176 Half brick masonry in common brunt clay building bricks 29.00 Sqmt. 618.79

having crushing strength not less than 35 Kg/Sq.Cm. in

Cement mortar 1:5 (1- Cement : 5 -coarse sand ) in

foundation and plinth (B) Conventional

177 Providing and laying cement concrete flooring 1:2:4 (1- 40.00 Sqmt. 352.01

cement : 2-coarse sand : 4-graded stone aggregate 20mm

nominal size) laid in one layer and finished with a floating

coat of neat cement. (B) 50mm thick.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

178 Providing 15mm thick cement plaster in single coat on 175.00 Sqmt. 184.78

Rough (Similar)side of single or half brick walls for interior

plastering upto floor two level and finished even and smooth

in (i) Cement mortar 1:3 (1-cement:3-sand)

179 Providing and Laying ordinary cement concrete 1:2:4 (1- 7.00 Cum 6888.15

Cement 2- coarse sand : 4- graded stone aggregates 20 mm

nominal size) and finishing smooth with curing etc.

complete including the cost of formwork but excluding the

cost of reinforsement for R.C.C work in (iii) Slabs having

more than 10 cm and upto 13 cm. thickness

180 Providing and laying (to level or slopes) and jointing with 20.00 Rmt 317.48

stiff mixture of Cement Mortar in proportion 1:1 Salt glazed

stoneware pipes including testing of pipes and joints

complete.(B) 150mm dia.

181 Providing and Constructing sock pit of 2.46 mt. dia outside 4.00 Nos 35192.44

and 4 mt depth with honey combed masonary 6.50 mt. from

bottom and 0.60 mt. brick masonary in C.M. 1:6 top with

RCC slab cover of M200 vent pipe 1.8mt. Long 75mm dia

& C.I. cover and cowel vent etc. comp

182 Providing corrugated G.I. sheet of class-3 roofing fixed with 105.00 Sqmt. 734.19

glavanished iron J or L Hooks, Bolts and nuts 8mm diameter

with bitumen and G.I. limpet washer or G.I. limpet washer.

filled with white lead complete excluding the cost of purlins,

Rafters and Trusses.(1) 0.80 mm thick sheet.

183 Point wiring for Light / Bell with 2-1.5 sq.mm & earth 223.00 Pts 485.81

wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV

grade FRLS PVC insulated multi strand copper wires up to

10 mtr length , in below type of pipe erected with 6A

Modular type switch / bell push & accessories and earth

continuity of following type, erected on PVC /

Metallic/Wooden box, single mounting base frame covered

with textured/metallic/white front plate modules erected on /

in wall / ceiling as per pipe erected, with necessary Lamp

holder/ceiling rose / H.D.Connector as directed.(f) with

medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete.Cat-III (Make:-

Honeywell, L&T, Havells, Indoasian, Legrand)

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

184 Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 57.00 Pts 674.68

sq.mm (Green) both are of .ISI marked 1.1 KV Grade FRLS

PVC insulated multi strand copper wires up to 10 mtr

length, in below type of pipe erected with 6A Modular type

switch and hum free EME step type electronic fan regulator

mounted and accessories with earth continuity of following

type erected on PVC / Metallic/Wooden box, single

mounting base frame covered with textured/metallic/white

front plate modules erected on / in wall / ceiling as per pipe

erected. with necessary ceiling rose / H.D.Connector as

directed..(f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling complete.Cat-

III (Make:- Honeywell, L&T, Havells, Indoasian, Legrand)

185 Point wiring for Individual Plug with & earth wire of 1.5 55.00 Pts 510.05

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS

PVC insulated multi strand copper wires up to 10 mtr

length, in below type of pipe erected complete with

Modular type switch & 5 pin Plug erected on PVC /

Metallic/Wooden box covered with appropriate front plate

modules erected on / in wall / ceiling as per pipe erected

with following type of accessories. [I] For 6A Plug and 6 a

switch with 2-1.5 sq.mm Cu. Wire from nearby

switchboard/mcb db board (f) with medium class Rigid PVC

pipe and accessories erected concealed in wall/ceiling

complete Cat-III (Make:- Honeywell, L&T, Havells,

Indoasian, Legrand)

186 Point wiring for on board Looped Plug with 6A Modular 113.00 Pts 257.55

type switch & 5 pin socket erected on PVC /

Metallic/Wooden box, single mounting base frame covered

with textured / metallic/white front plate modules erected

on / in wall / ceiling with following type accessories.Cat-III

(Make:- Honeywell, L&T, Havells, Indoasian, Legrand)

187 Providing following type of Modular Type Accessories 10.00 Pts 160.59

mounted with PVC / metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front plate

, modules erected with necessary connections as per site

situation directed by Engineer In charge. (3) Two Pin/RJ-11

Telephone Socket[A] For One Gang Cat.III (Make:-

Honeywell, L&T, Havells, Indoasian, Legrand)

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

188 Providing following type of Modular Type Accessories 10.00 Nos. 160.59

mounted with PVC / metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front plate

, modules erected with necessary connections as per site

situation directed by Engineer In charge. (4) TV Co-axial

Socket outlet Cat-III (Make:- Honeywell, L&T, Havells,

Indoasian, Legrand)

189 Providing following type of Modular Type Accessories 108.00 Nos. 25.25

mounted with PVC / metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front plate

, modules erected with necessary connections as per site

situation directed by Engineer In charge. (7) Blank Plate

Single Cat.III (Make:- Honeywell, L&T, Havells,

Indoasian, Legrand)

190 Providing following type of Modular Type Accessories 10.00 Nos. 160.59

mounted with PVC / metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front plate

, modules erected with necessary connections as per site

situation directed by Engineer In charge. (8) Computer RJ-

45 socket Cat-III (Make:- Honeywell, L&T, Havells,

Indoasian, Legrand)

191 Providing following type of Modular Type Accessories 72.00 Nos. 180.79

mounted with PVC / metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front plate

, modules erected with necessary connections as per site

situation directed by Engineer In charge. (9) 16 Amp. SP one

way switch Cat-III (Make:- Honeywell, L&T, Havells,

Indoasian, Legrand)

192 Providing following type of Modular Type Accessories 72.00 Nos. 199.98

mounted with PVC / metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front plate

, modules erected with necessary connections as per site

situation directed by Engineer In charge. (10) 6/16Amp.

Universal socket Cat-III (Make:- Honeywell, L&T,

Havells, Indoasian, Legrand)

193 Providing following type of Modular Type Accessories 15.00 Nos. 604.99

mounted with PVC / metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front plate

, modules erected with necessary connections as per site

situation directed by Engineer In charge. (21) Foot Light as

per colour requirement with concealed box, modular

accessories, acrylic glass cover with suitable LED watt with

all accessories as per following module (c) Six modules

Cat-III (Make:- Honeywell, L&T, Havells, Indoasian,

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

194 Providing and erecting ISI mark Medium class RIGID PVC 700.00 Mtrs. 33.33

PIPES of following size complete to be erected on/in wall or

ceiling erected with necessary PVC fittings & Junction

boxes fixed with adhesive solution & Clamps with following

dia of pipes, in approved manner as directed (b) 25 mm

195 Providing and erecting ISI mark Medium class RIGID PVC 225.00 Mtrs. 54.54

PIPES of following size complete to be erected on/in wall or

ceiling erected with necessary PVC fittings & Junction

boxes fixed with adhesive solution & Clamps with following

dia of pipes, in approved manner as directed (c) 32 mm

196 Providing & erecting PVC Corrugated Flexible Conduit with 150.00 Mtrs. 21.21

required nos. of coupling, PVC bushes, Check-nuts etc.

complete of following sizes. (2) 25 mm

197 Providing & erecting PVC Corrugated Flexible Conduit with 75.00 Mtrs. 27.27

required nos. of coupling, PVC bushes, Check-nuts etc.

complete of following sizes. (3) 32 mm

198 Supplying and laying UPVC cable trunking system 10.00 Mtrs. 428.24

comprising unplasticised polyvinyl, chloride rigid material

with ignition free and flame proof confirming BS with

necessary end caps Internal and external bend, flat bends,

coupler, tee etc..All necessary accessories and measuring of

following sizes (2) 100 mm x 50 mm trunking

199 Providing and erecting Mains with 1.1 KV grade FRLS PVC 2856.00 Mtrs. 62.62

insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected concealed in /flushed

on wall/ceiling, with 1.5 sq. mm copper conductor FRLS

PVC insulated stranded wire of green colour for earth

continuity of following size (A) with medium class Rigid

PVC pipe and accessories (a) 2 wire 1.5 sq. mm (Make: -RR

Kabel, Havells, Avocab, KEI,Johnson)

200 Providing and erecting Mains with 1.1 KV grade FRLS PVC 1394.00 Mtrs. 82.82

insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected concealed in /flushed

on wall/ceiling, with 1.5 sq. mm copper conductor FRLS

PVC insulated stranded wire of green colour for earth

continuity of following size (A) with medium class Rigid

PVC pipe and accessories (b) 2 wire 2.5 sq. mm (Make: -RR

Kabel, Havells, Avocab, KEI,Johnson)

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

201 Providing and erecting Mains with 1.1 KV grade FRLS PVC 384.00 Mtrs. 260.58

insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected in / on wall / ceiling

with 2.5 sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity of

following size (A) with medium class Rigid PVC pipe and

accessories (h) 4 wire 6 sq. mm (Make: -RR Kabel,

Havells, Avocab, KEI,Johnson)

202 providing and erecting Mains with ISI marked, 1.5KV grade 112.00 Mtrs. 91.91

electrolyte multi stranded, annealed copper conductor with

heat resistant PVC insulated conforms to IS 694, IEC -

erected in existing pipe of following size (Specifically for

control panel, relays, power switchgears, motor starters &

control wiring) with required size of copper lugs, nuts and

bolts if required. (f) One wire 10.00 sq. mm

203 providing and erecting Mains with ISI marked, 1.5KV grade 36.00 Mtrs. 300.98

electrolyte multi stranded, annealed copper conductor with

heat resistant PVC insulated conforms to IS 694, IEC -

erected in existing pipe of following size (Specifically for

control panel, relays, power switchgears, motor starters &

control wiring) with required size of copper lugs, nuts and

bolts if required. (i) One wire 35.00 sq. mm

204 Supplying and erecting Flexible PVC insulated multi strand 140.00 Mtrs. 22.22

multi core 1.1 kv grade ISI marked copper wires of

following size to be erected as directed. (c) 1.00 Sq.mm

core round/ flat PVC sheathed

205 Supplying and erecting Flexible PVC insulated multi strand 170.00 Mtrs. 46.46

multi core 1.1 kv grade ISI marked copper wires of

following size to be erected as directed. e) 1.50 Sq.mm

core round PVC sheathed

206 Providing & Erecting approved make following size of TV 450.00 Mtrs. 62.62

Co-axial flexible cable comprising inner conductor of solid

bare copper insulated with Foam PE & Secondary conductor

made of poly - Aluminium film bonded Al. Braids @

suitable coverage overall sheathed with black PVC

insulation. e).RG-11

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

207 Providing & Erecting approved make following size of TV 250.00 Mtrs. 20.20

Co-axial flexible cable comprising inner conductor of solid

bare copper insulated with Foam PE & Secondary conductor

made of poly - Aluminium film bonded Al. Braids @

suitable coverage overall sheathed with black PVC

insulation. e).RG-11 Supplying & erecting approved make

Telephone Cable electrolytic copper conductor PE insulation

twisted in two pairs, & wrapped with FRLS PVC tape &

sheathed with FRLS PVC or HFFR outer Jacket suitable for

telephone wiring & confirming to C-DOT erected in existing

pipe. of following size of conductors & nos.of pairs. With

necessary connections. [A] Conductor Size 0.5 mm 2)

208 Supplying & erecting approved make LAN cable of 320.00 Mtrs. 47.47

following size in existing pipe as per direction [C] CAT -

209 Providing & erecting main Distribution (MDF) indoor type, 2.00 Nos. 994.85

back mounted frame as per DoT standard approved with

krone strips (a) Suitable for 10 pair

210 Supplying & erecting M.S. Box having 16 Gauge painted 12.00 Mtrs. 88.88

with red oxide or Heavy duty PVC box erected flushed on

wall or concealed in wall with necessary plastering &

finishing as directed of following size. (c) 200 mm x

211 Providing & erecting Switch board for Computer or electric 10.00 Nos. 1133.22

apparatus consisting of following modular type accessories

mounted with PVC / Metallic concealed/open box with

single mounting base frame covered with textured/metallic

/white front plate,modules erected with necessary

connections as directed

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug For Modular Type Accessories.Cat-III

(Make:- Honeywell, L&T, Havells, Indoasian, Legrand)

212 Decorative call bell Ting-tong box type 250 volts complete 10.00 Nos. 71.71

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

213 Supplying and erecting LED indoor fittings with LEDs of 151.00 Nos. 373.70

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/CRCA/ aluminium die cast

powder coated and high U.V. & corrosion resistance with

diffuser with company mark/name 160V to 270V, Power

Factor more than 0.95, THD < 15%,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE:

Below description have shown ranges of Wattage capacity of

LED fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.) (A) Tube Light with

integral/ non-integral driver . (iv) 22-24 Watts, Surge -

2KV,IP-20, conventional 4 feet Cat III (Make:- Wipro,

LT,Philiphs,Havells,Jaquar)

214 Supplying and erecting led lamps with following wattage 35.00 Nos. 112.11

capacity of 220 to 240 voltage, minimum 15000 burning

hours life, 500 V in built-surge protection,Polycarbonate

diffuser, mounting suitable for E14 / E27 / B22 lamp

holders, pf >= 0.5 (A) LED Lamps integral type, with PC

diffuser suitable LAMP holder (i) 5 to 8 watts Cat-III

(Make:- Wipro, LT,Philiphs,Havells,Jaquar)

215 Supplying and erecting LED street light / Flood light fittings 20.00 Nos. 3345.12

with High power White LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency more than

lm/w and corrosion free High pressure die cast aluminum

housing with smooth finish powder coated and heat sink

extruded aluminium with diffuser and Polycarbonate optics/

lenses, with toughened glass with company mark/name

engraved or embossed 160 to 270 V,Power Factor more than

0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio

>0.45, Luminaire efficacy> 100 lumens/watt . LED driver

efficiency > 85 %.( fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown ranges

of Wattage capacity of LED fittings.The Engineer incharge

may select any wattage capacity between the ranges shown.)

(A) Street Light (IP-65), Surge protection -4KV integral and

,Light must have 440VAC line supply with over-voltage

protection.(i) above 36 to 48 Watts Cat-III (Make:- Wipro,

LT,Philiphs,Havells,Jaquar)

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

216 Supplying and erecting LED street light / Flood light fittings 12.00 Nos. 6088.28

with High power White LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency more than

lm/w and corrosion free High pressure die cast aluminum

housing with smooth finish powder coated and heat sink

extruded aluminium with diffuser and Polycarbonate optics/

lenses, with toughened glass with company mark/name

engraved or embossed 160 to 270 V,Power Factor more than

0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio

>0.45, Luminaire efficacy> 100 lumens/watt . LED driver

efficiency > 85 %.( fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown ranges

of Wattage capacity of LED fittings.The Engineer incharge

may select any wattage capacity between the ranges shown.)

(B) Flood Light (IP-65), Surge protection -4KV integral and

,Light must have 440VAC line supply with over-voltage

protection. (iii) Above 60 to 90 watts Cat-III (Make:-

Wipro, LT,Philiphs,Havells,Jaquar)

217 Supplying and erecting LED street light / Flood light fittings 4.00 Nos. 4819.72

with High power White LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency more than

lm/w and corrosion free High pressure die cast aluminum

housing with smooth finish powder coated and heat sink

extruded aluminium with diffuser and Polycarbonate optics/

lenses, with toughened glass with company mark/name

engraved or embossed 160 to 270 V,Power Factor more than

0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio

>0.45, Luminaire efficacy> 100 lumens/watt . LED driver

efficiency > 85 %.( fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown ranges

of Wattage capacity of LED fittings.The Engineer incharge

may select any wattage capacity between the ranges shown.)

(C) Post Top Lantern LED fitting comprises of finish cast

aluminum spigot and spun aluminum canopy fixed with opal

polycarbonate, pipe arrangement for vertical mounting

driver and accessories wired upto terminal block.IP 65 (ii)32-

40W Cat-III (Make:- Wipro, LT,Philiphs,Havells,Jaquar)

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

218 Providing and erecting Approved make Four pole moulded 8.00 Nos. 6173.12

case circuit breaker having breaking capacity ICU of 25 KA.

at 415 V,having normal current rating up to 25 A to 100A.

with Fixed thermal & magnetic release suitable to work on

A.C. supply 50 c/s. with all internal connections, spreader

tinned copper & complete erected in existing 16 G.M.S.

housing. ICS=100% of ICU only Cat III (Make:-

Indoasian, L&T (LK), ABB, Schneider)

219 Providing and erecting Approved make Four pole moulded 6.00 Nos. 8055.76

case circuit breaker having breaking capacity ICU of 35 KA.

at 415 V. having normal current rating 125A. with Fixed

thermal & magnetic release suitable to work on A.C.supply

50 c/s. with all internal connections, spreader tinned copper

& complete erected in existing 16 G.M.S. housing.

ICS=100% of ICU only Cat III (Make:- Indoasian,

L&T (LK), ABB, Schneider)

220 Providing and erecting Approved make Four pole moulded 2.00 Nos. 16221.61

case circuit breaker having breaking capacity ICU of 35 KA.

at 415 V. having Normal current rating 200A.with variable

Thermal & magnetic release suitable to work on A.C.supply

50 c/s. with all internal connections, spreader tinned copper

& complete erected in existing 16 G.M.S.housing

ICS=100% of ICU only Cat III (Make:- Indoasian,

L&T (LK), ABB, Schneider)

221 Providing and erecting Approved make Earth fault Relay 2.00 Nos. 4983.34

suitable to mount with inter connection suitable to

following size of moulded case circuit breaker having CT

ratio & MCCB rating as following along with shunt trip

220V AC. with all internal connections & complete erected

in existing M.S.housing. (2) 125 A -200 A , CT Ratio 1/200

222 Supplying and erecting triple pole & neutral 440V / 500V 14.00 Rn.Mtrs 1961.42

panel mounting Copper Busbars with four equal Nos. of

electrolyte bus having current density not more than

Amp. / sq.mm (Rated current / cross section area) duly

wrapped with colour insulating tape for phase sequence of

following current carrying capacity, erected with necessary

bus bar supports /insulators, main cable socket to each bar,

erected in existing cubical panel with necessary

connections. (A) Suitable for 100 Amp. Capacity

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

223 Supplying and erecting triple pole & neutral 440V / 500V 2.00 Rn.Mtrs 3202.71

panel mounting Copper Busbars with four equal Nos. of

electrolyte bus having current density not more than

Amp. / sq.mm (Rated current / cross section area) duly

wrapped with colour insulating tape for phase sequence of

following current carrying capacity, erected with necessary

bus bar supports /insulators, main cable socket to each bar,

erected in existing cubical panel with necessary

connections. (B) Suitable for 200 Amp. capacity

224 providing and erecting Miniature circuit breaker single pole 36.00 Nos. 270.68

0.5A to 2A system and having breaking capacity 10 KA to

be erected in existing box. confirming to IS 8828/1996 with

ISI Mark Cat.III (Make:- Indoasian, L&T (LK), ABB,

225 Providing and erecting Miniature circuit breaker single pole 72.00 Nos. 112.11

6A to 25A suitable to operate on 240 V A.C. system and

having breaking capacity 10 KA to be erected in existing

box. confirming to IS 8828/1996 with ISI Mark Cat-III

(Make:- Indoasian, L&T (LK), ABB, Schneider)

226 Providing & erecting 240 V MCB double pole switch for 12.00 Nos. 295.93

lighting Load (B Curve) having 10 KA breaking capacity &

confirms to IS : 8828 in existing box having following

capacity (B) 40 Amp. Cat-III (Make:- Indoasian, L&T

(LK), ABB, Schneider)

227 Providing & erecting 415 V MCB Four Pole for Motor & 32.00 Nos. 737.30

Inductive Load (C Curve) having 10KA breaking capacity

& confirms to IS :8828 in existing box having following

capacity (B.) for 63 Amp. Cat-III (Make:- Indoasian,

L&T (LK), ABB, Schneider)

228 Providing and erecting Sheet Steel powder coated MCB 12.00 Nos. 2339.16

distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to IS

8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs should be used of same

company of MCB to be used) suitable for (B) three phase

incoming and single phase horizontal type outgoing Per

phase isolation type (PPI) (b) sheet steel double door (i)4

way (Make:- Indoasian, L&T (LK), ABB, Schneider)

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

229 Providing and erecting Approved make RCCBs conforming 36.00 Nos. 2235.13

to IS: 12640 and having sensitivity of 30 mA and Short

Circuit withstand capacity of 10 KA and suitable for

operation on single phase 240 V,50Hz. having characteristic

of quick action & tripping with all advance feature & do not

incorporate any electronic component. for following Max.

rating erected as directed (iI) 40 Amps.DP Cat. III (Make:-

Indoasian, L&T (LK), ABB, Schneider)

230 Providing and erecting metallic vitrified danger notice board 4.00 Nos. 69.69

as per language suggested by engineer incharge for

MEDIUM VOLTAGE installation to be erected as per IS-

231 Providing and erecting Annealed bare Copper wire 8 to 16 24.00 Kgs. 794.87

232 Providing and erecting Pipe type earthing having 150 20.00 Nos. 368.65

cms.long and 2.5 cms. dia. galvanised iron pipe with

coupling and buch buried in specially prepared earth pit

complete with necessary 8 SWG earth wire.

233 For using salt and charcoal / coke as required for pipe type 20.00 Nos. 171.70

234 Supplying & erecting earth pit of minimum bore dia.150mm 6.00 Nos. 4591.46

size approved make Earthing Electrode consisting Pipe-in-

Pipe Technology as per IS 3043-1987 made of corrosion free

hot dipped G.I.Pipes having Outer pipe dia of 50mm

having 80-200 Micron galvanising, Inner pipe dia of 25 mm

having 200-250 Micron galvanising, connection terminal dia

of 12mm with constant ohmic value surrounded by highly

conductive compound with high charge dissipation suitable

for following type of applications with chamber and heavy

duty cover. (A)(approved make OEM has to submit test

certificate including value of earth resistance of installation

duly stamped and signed by agency and officer Incharge has

to ensure the value of earthing resistane mentioned in test

Certificate) & having back filling compound of (B) Inner

chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter

testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no

load & dry form, Sulphar content:- <2%(C) Back fill

Compound :- Earthing compound should be capable to

retain moisture for long time Necessary test report must be

submitted by Agency. (a) For Electrical Installation up to

440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

235 Providing & erecting weather proof, dust & vermin proof, 6.00 Sq.Mtrs. 10468.65

floor mounted front operated indoor type cubical panel

board necessary IP-42 and above protection as per approval

from engineer incharge made from 14 SWG thick CRC M.S.

sheet for outer body & doors, 16 SWG thick CRC M.S.sheet

for internal partitions with necessary accesories , supporting

angles/ flats channel including cutting, bending, drilling,

welding, riveting with internal partitions & cable alley as per

requirements & instruction of engineer-in-charge with

erection of supplied switch gears, BUSBARS, suitable size

of inter connecting PVC copper wire / copper-aluminium

strips, rubber grommets, rib, bakelite control fuses/MCB for

measuring instruments, earth bus & earth bolts, foundation

flange - bolts-base Plates, sufficient nos. of hinged doors,

handles with locking arrangement and rubber gasket,heavy

duty end terminal connection,danger notice board,necessary

ventilation,earthing strip complete. The Panel shall be

painted with epoxy powder coating. (The rates excludes the

cost of switchgears, bus bars, inter connecting mains &

Copper Aluminium strips, meters, Fuses etc. The dimension

shall be measured excluding base beams) The panel shall be

supplied with following approved manufacturers with

following size. (A) locally fabricated panel board (i) with

236 Providing , erecting , fabricating the M.S. structure as per 90.00 Kgs. 77.77

requirement on site incorporating proper size of M.S.

angles,square,round, flats, bars, channels, sections complete

with cutting, welding, grinding & finishing duly painted

with one coat of red oxide with erection on site as per

direction of engineer in charge with necessary grouting,

cementing, plastering & finishing complete.

237 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured 280.00 Mtrs. 220.18

cable multistrand Aluminium conductor for 1.1 KV. to be

laid on wall with necessary clamps or in existing trench /

pipe of following size of cables (B) 3 1/2 core 35 Sq. mm (

16 Sq. mm 1/2 core) (Make: -RR Kabel, Havells, Avocab,

238 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured 234.00 Mtrs. 378.75

cable multistrand Aluminium conductor for 1.1 KV. to be

laid on wall with necessary clamps or in existing trench /

pipe of following size of cables (D) 3 1/2 core 70 Sq. mm (

35 Sq. mm 1/2 core) (Make: -RR Kabel, Havells, Avocab,

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

239 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured 360.00 Mtrs. 117.16

cable multistrand / Solid Aluminium conductor for 1.1 KV.

to be laid on wall with necessary clamps or in existing

trench / pipe of following size of cables v(A) 4 core 4 Sq.

mm (Make: -RR Kabel, Havells, Avocab, KEI,Johnson)

240 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured 520.00 Mtrs. 140.39

cable multistrand / Solid Aluminium conductor for 1.1 KV.

to be laid on wall with necessary clamps or in existing

trench / pipe of following size of cables (C) 4 core 10 Sq.

mm (Make: -RR Kabel, Havells, Avocab, KEI,Johnson)

241 Making trench in soft soil of suitable width of 90 cm deep 287.00 Mtrs. 55.55

for laying cable or locating the fault all over the run and

back filling the same and making the surface as normal

242 Making trench in Hard Murrum / Tar Road of suitable width 189.00 Mtrs. 74.74

of 90 cm or required depth for laying any size of cable or

locating the fault all over the run and back filling the same

and making the surface as normal ground.

243 Making trench in Hard Murrum / Tar Road of suitable width 75.00 Mtrs. 357.54

of 90 cm or required depth for laying any size of cable or

locating the fault all over the run and back filling the same

and making the surface as normal ground. (B) If additional

machinery like hammer driller or JCB use [Add]

244 Providing & laying approved make Double walled 986.00 Mtrs. 62.62

corrugated pipes (DWC) of polyethylene(conforming to IS

14930 II )with necessary connecting accessories of same

material at required depth in existing trench for laying of

cable. below ground / road surface for enclosing cable (A)

50 mm Outer Dia

245 Providing & laying approved make Double walled 198.90 Mtrs. 137.36

corrugated pipes (DWC) of polyethylene(conforming to IS

14930 II )with necessary connecting accessories of same

material at required depth in existing trench for laying of

cable. below ground / road surface for enclosing cable (D)

120 mm Outer Dia

246 Providing & laying approved make ISI marked Rigid PVC 30.00 Mtrs. 236.34

pipe having 6Kg / cm2 (Class-3) to be erected at road

crossing on or floor as directed for laying of cable. The pipes

as following size of dia & weight per 6 mtr. (F) 110 mm

inner Dia. (11.63 Kg/6 RMT)

247 Providing and, fixing heavy duty flange type brass cable 24.00 Nos. 33.33

gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for

following size of cables. (A) 2 to 4 core 2.5 / 4 Sq. mm

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

248 Providing and, fixing heavy duty flange type brass cable 48.00 Nos. 38.38

gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for

following size of cables. (C) 2 to 4 core 10 Sq. mm

249 Providing and, fixing heavy duty flange type brass double 12.00 Nos. 75.75

compression type cable gland with rubber ring for PVC

insulated armoured cable complete with out going tails,

insulating tape etc for following size of cables. (B) 3 & 1/2

core 35/50 Sq. mm

250 Providing and, fixing heavy duty flange type brass double 8.00 Nos. 103.02

compression type cable gland with rubber ring for PVC

insulated armoured cable complete with out going tails,

insulating tape etc for following size of cables. (C) 3 & 1/2

251 Solder less crimping type Aluminium lugs conforming to IS 96.00 Nos. 6.06

suitable for cable of following size evenly crimped with high

pressure tool & connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved manner. (A)

252 Solder less crimping type Aluminium lugs conforming to IS 192.00 Nos. 13.13

suitable for cable of following size evenly crimped with high

pressure tool & connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved manner. (B)

253 Solder less crimping type Aluminium lugs conforming to IS 48.00 Nos. 20.20

suitable for cable of following size evenly crimped with high

pressure tool & connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved manner. (D)

254 Solder less crimping type Aluminium lugs conforming to IS 32.00 Nos. 25.25

suitable for cable of following size evenly crimped with high

pressure tool & connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved manner. (E)

255 Providing and erecting Approved make Ceiling fan with 57.00 Nos. 1596.81

double ball bearing ISI mark with condenser A.C. 23OV.50

c/s.1200 mm. sweep complete, canopy erected on existing

hook or clamp with earthing. [Make shall be approved by

Engineer in charge] (Make:- Crompton, Havells, Orient)

256 Supplying and erecting 19 / 20 mm. nominal bore Medium 57.00 Mtrs. 108.07

Class M.S. Pipe down rod erected duly painted for fan

complete with proper insulation without leckage and

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

257 Supplying & erecting fan hook box of 10 mm M.S. round 57.00 Nos. 108.07

bar bounded to the RCC bars up to 50mm length each side

and pierced through a 16 Gauge M.S. box / Heavy Duty

PVC box complete erected concealed in Ceiling with

necessary finishing.

258 Supplying & erecting approved make low noise decorative 27.00 Nos. 1703.87

exhaust fan having square frame ABS body with inbuilt

lowers & square frame. 200mm with 1350RPM Cat.II

(Make:- Crompton, Havells, Orient)

259 Supplying and erecting approved make Octagonal pole made 20.00 Nos. 6874.06

from HR sheet steel. The pole should be made as per IS. and

shall be coated with hot dip galvanizing as per IS

2629/2633/4759, suitable suspend local wind speed with

integral Junction box consist of terminal plate of min 6mm

Hylam sheet, standard profile 35mmX7.5mm Din-Rail for

MCB Mounting, stud type terminal and arrangement for

cable termination to be erected With Suitable foundation

(Included) as per details given by manufacturer considering

site requirement(C) 5 Mtr. Long 70 mm Top X 130 mm

bottom dia, 3 mm thickness with 200mmX200mmX12mm

base plate, 4-M16 Bolts and 600mm long with necessary

G.I. J Bolts .Approx Pole weight 46 kg

260 Supplying & erecting approved make SMC press moulded 16.00 Nos. 515.10

composite FRP. loop-in, loop-out approx. 2mm thick box

complete with Bakelite connector strip 5way(3P+N+E),DIN

rail for mounting mob & hinged doors as per requirement

having locking arrangements with mounting clamp with

nuts, bolts & washers suitable for erection on pole with

cable clamps& earth bolt of following size of box. (b)

250mm x 200mm x 100mm [deep]

261 Providing street light pole bracket comprising main B Class 20.00 Nos. 561.56

MS pipe of 4.2 cm/require outside dia. complete with

suitable B Class M.S. sleeve tubing of approx. 45cms.length

and suitable for 76.5 mm / 80mm. / require size pole top

having sufficient fastners for fixing the brackets and having

spread of 1 mtr. length with suitable rise as per site

condition & suitable welded stiffener reducer and nipple

with check nut complete painted with one coat of Red oxide

/ PU base primer and two coats of Aluminium / PU paint.

paint with following nos of arms. [A] Single Arm bracket

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

262 Supplying & erecting approved make Digital time switch 4.00 Nos. 3168.37

having lithium cell 6 years operative and operate battery

backup 1 channel day clock with 14 memory programme,

suitable to operate on 240V + 5%, 16A with, floating

contacts Minimum switching setup time 1 minimum & LCD

display. Also comprised permanent ON/OFF switching.

Programming switches & housed in fire proof thermoplastic

enclosure & transparent cover erected as required with

necessary connection erected as directed.

263 Supplying & erecting power contactor ,AC3 duty for time 4.00 Nos. 2782.55

switch complete erected as per direction Cat III (Make:-

Indoasian, L&T (LK), ABB, Schneider) [D] 4 pole 440V

264 Supplying and erecting approved make panel mounting type 4.00 Nos. 1275.63

Digital Voltmeter having 3 digits LED display, 0 to 750 AC

Volts range erected on existing panel board with all

connection, wiring etc .with manufacturers calibration

265 Supplying and erecting approved make panel mounting type 4.00 Nos. 1558.43

Digital Ammeter having 3 digits LED display, external CT

operated, calibrated for 0 to 1000 Amps suitable to operate

on 500 Volt AC , erected on existing panel board with all

connection, wiring etc .with manufacturers calibration

266 Providing & erecting L.T. Current Transformer with bar 12.00 Nos. 274.72

primary 50/5 to 1000/5 ratio 15 VA burden erected in

existing CRCA box duly secured with insulating materials

connected to the meter

267 Supplying and erecting approved make suitable panel 12.00 Nos. 43.43

indicator LED type lamp, lens cover, complete erected with

necessary connections.

268 Providing & erecting open well horizontal mono block 2.00 Nos. 15707.52

pump set with cast iron body, complete for three phase

submersible motor having[C] For 3 HP 3 phase open well

horizontal mono block pump set suitable for 85 LPM to

LPM @ 11 mtr to 33 mtr head suitable for 50/65 mm dia

delivery pipe Cat.II

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

269 Supplying & erecting approved make motor control 2.00 Nos. 7722.46

cubical panel (Direct - on - line) made from 16 G. CRCA

sheet duly epoxy powder painted inside and outside with

hinged doors and locking, arrangement consisting of suitable

size of ON- OFF isolator (AC - 3/23duty) main fuses, single

phasing preventer, indicating lamps for R- Y - B phases,

overload relay, Automatic water level controller, Ammeter,

Voltmeter each with two way selector switch incoming,

wires duly socket crimped, main contactor & overload relay,

start - stop push buttons, to be erected on angle iron frame

grouted on wall as directed. The isolator, overload relay &

contactors will be of L & T, Siemens or BCH make only.(A)

DOL up to 5.0 H.P.

270 Providing and erecting ISI marked PVC insulated PVC 40.00 Mtrs. 146.45

Sheathed Flat flexible Submersible copper cable approved

make of following Size. (C) 3 Core x 4 Sq. mm

271 Providing Water proof straight Joint in PVC insulated flat 2.00 Nos. 189.88

flexible copper cable by using insulating material, water

proofing material, & making the joint complete. (A) Up to

272 Supplying of following size of HEAVY UPVC column pipe 30.00 Rmts. 359.56

with coupler and wire lock [B] 50 mm dia

273 Supplying, & erecting C.I. swing, check type non-return 2.00 Nos. 1020.10

(Reflux) Valve -ISI marked suitable for following size (A)

274 Supply of following size of TOP & BOTTOM accessories 2.00 Per Set 1489.75

i.e. Adaptor set (CI) long, pump guard set, starter pipe

Rubber ring for submersible pump & UPVC column pipe as

directed by Engineer - in - charge with necessary plumbing

as desired.[D] 50 mm dia

Total Cost of Construction Cost

(Rupees Three Crore One lakh Eighty Two Thousand Eight Hundred Thirty Seven and Twenty One Paise Only)

I/We am/are willing to carry out the work at ………………………………………………..% above/below (percent

should be written in figures and words) of the estimated rates mentioned above. Amount of my/our tender works out

*Estimated amount *Estimated amount

Put to tender Rs…30182837.21 Put to tender Rs.30182837.21

Deduct ……. % below Rs……………………..…. Add ……. % Avove Rs…………..…

Net Rs. …………………….… Total Rs. ………….…

The Contractor shall exhibit a board with detailed specification and details of work as directed by

the Engineer-In-Charge for which no extra payment shall be made.

The labour cess will be deducted as per prevailing rules i.e. 1% of the work done

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

3 GST and Income tax TDS will be deducted at a source while making payments of bills.

In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt.G.R.: PRC-

10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there

4 is a change as per actual mix design the cost of difference of cement consumption have been deducted from the

rate of original item at the rate of input rate mentioned in all the tender.

Dismentalling of Credit materials amounting of Rs. -28482.00 must be recovered from Contractor's respective

Deputy Executive Engineer Executive Engineer

R&B Sub Division R&B Division

Khedbrahma Himatnagar