Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.0 LAccepted-AOC BLDG NO XI 74 NEAR VALLARAM KULLANGARA TEMPLE KUNHIMANGALAM KOVVAPPURAM PO KANNUR DIST KERALA 670309 | KANNUR | KERALA | 670309 | L1 | Accepted-AOC L1 | |
| 2 | L2₹33.8 L+₹3.4 L (11.2%)Rejected-Finance | L2 | Rejected-Finance L2 |
Tender Value
₹30.9 L
EMD Value
₹61,860
Closing Date
2 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) CHILODA
GE (AF) Chiloda, Lekawada Patia, PO CRPF Campus, Gandhinagar (Gujarat)-382042
ADDN/ALTRN OF BLDGS NO P-101 AND 08 AT AF STN WADSAR
2022_MES_567510_1
8872/2022-23/E8
Open Tender
Civil Works
Item Rate
180 days
WADSAR
As per NIT
7 documents required · 7 mandatory
₹500
GE (AF) CHILODA
₹61,860
Yes
25 Jan 2023
6 Dec 2022
4 Jan 2023
6 Dec 2022
2 Jan 2023
20 Dec 2022
6 Dec 2022 - 19 Dec 2022
Amount
M&L for complete removal of existing unserviceable water proofing treatment from top of roof and canopies/chajjas of building including removal of debris out side MD land complete all as specified and directed.
Demolition of cement concrete (un-reinforced) of any description (including plastering, leeping etc) in any position not otherwise specifically provided for n.exc 15 cm thick complete all as specified and directed.
M&L for PCC (1:2:4) type B-1(using 20 mm graded crushed stone aggregate) as in padding of 40 mm average thickness and in adequate slope on roof surface and finishing the top even & green and smooth complete all as specified and directed.
M&L for rendering 10mm thick in CM 1:4, mixed with WPC @3% by weight of cement on fair faces of concrete surfaces without using extra cement as in roof complete all as specified and directed. Note:- WPC shall be measured & paid separately.
M&L for preparing clean and dried plastered surface and applying a coat of oil based bitumen primer conforming to IS 3384-1986 @ 0.30 litrs/sqm and then laying APP polymer modified membrane, 3mm thick with non woven polyster reinforced membrane (3.50 kg/sqm) having thermal insulation with white mineral gravel finish on upper side of membrane and laid by torch application method to the entire surface complete all as specified and directed by Engineer in Charge.
Supply only Integral waterproofing compound
Excavation over area n exc 1.5 mtr deep and getting out soft /loose soil complete all as specified and directed.
Hardcore of brocken stone or boulder gauge n exc 63mm, deposited, sprade and levelled in layers n exc 15cm thick watered and rammed to true surface complete all as specified and directed.
M&L 100 mm thick PCC type D-2, 1:4:8 (40mm graded aggregate) as in sub base of floor finishes complete all as specified and directed.
M&L for Machine pressed precast conctete interlocking glossy/ lacquer finish paver block any shape and size with grey cement and pigment confirming to IS 15658-2006 of 80 mm thickness including 2mm thick rubber mould glossy/ lacquer finish paver block of Grade M-40 and over sand cushion complete all as specified and directed. (Note- Sand will be measured and paid separately)
M&L 25mm thick sand filling (sand cushioning) under path for layers interlocking tiles complete all as specified and directed.
Removing excavated soil n.exc 50 m and depositing where directed at a level n.exc1.5m above the starting points complete all as specified and directed.
M&L for precast cement concrete 1:2:4 type B-0 (using 12.5mm and below stone aggregate ) in kerb stone factory made as approved by GE with plaine fair faces including champhering, weathering etc complete with joint to match in CM 1:6 complete all as specified and directed.
Taking out existing unserviceable plaster, loose unsound weaken cement concrete of any description and in any position from existing surface of RCC roof slab/ RCC facia/ beams/ columns/ RCC chajja, average depth 25mm (approximate 6.5 mtrs height from natural GL) with power driven pneumatic chiesel and removal of debries upto a distence 500 mtrs out side MD land including saw cutting of all edges, making square shoulders of cavaties and roughening of smooth surface, scraping out and removing corrosion and all loose scales, rust etc. from the visible reinforcement and cleaning the steel reinforecement properly providing NIT zink primer to form a contineous film and preparing the surface to receive concrete of epoxy grouting mortar etc. including providing necessary scaffolding complete all as specified and as directed.
M&L for applying bonding coat of modified styrene butadene emulsion in proportion 1 part (bonding agent) : 1 part (water) : 3 part (OP cement) by volume with the brushes etc. to bind new cement plaster/ polymer modified plaster/ concrete/ screed concrete with oldsurface including removal of loose/ distengrated old concrete/ plaster including preparation of surface etc. complete all as specified and as directed.
M&L for applying 25-35mm average thickness plaster on ceiling slab and chajja projections, facia and beams with polymer modified mortar firtified with SBR in proportion 1 part (cement) : 3 part (sand) by weight of cement with 11 to 15 ltrs water addition, finishing surface to match with existing adjoining surface complete all as specified and as directed.
Taking down cement or cement lime plaster any description on brick or stone wall/ celling including raking out joint , haking for key scrubing with water etc complete all as specified and directed.
M&L for rendering 15 mm thick on fair faces of concrete or block masonary CM 1:6 finished even and smooth (without using extra cement) in internal surface of wall complete all as specified and directed
All as per item No 18 here in before but 10 mm thick CM 1:6 and setting coat 5mm thick CM 1:4 mixed with WPC in external surface of wall including scaffolding complete all as specified and directed . Note:- WPC measured and paid in revalent item of this schedule.
All as per item No 18 here in before but 5 mm thick in ceiling surfaces CM 1:4 complete all as specified and directed.
M&L for painting to old steel surface of any description over 10cm width or grith not otherwise described including preparation , priming with zinc chromate and two coats of synthetic enamel paint complete all as specified and directed.
M&L for preparation of old wooden surface of any description not otherwise described over 10cm width or grith and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.
M&L for preparation of new plastered surface of wall and applying two coats of distemper oil emulsion over a coat of primer over a sufficent coat of Birla wall putty complete all as specified and directed
M&L for complete removal of existing treatment of wall surface and applying two coat of distemper oil emulsion over a coat of primer over a sufficient coat of Birla wall putty in old surface of wall complete all as specified and directed
M&L preparation of new surfaces of wall and applying two coats of cement base paint complete all as specified and directed
M&L for complete removal of existing treatment from old wall surfaces and applying two coats of cement base paint complete all as specified and as directed.
M&L for preparation of new plastered surface of ceiling and applying three coats of white wash complete all as specified and directed.
M&L for old plastered surface for two coats of white wash on old ceiling surface complete all as specified and directed.
Dismantling of floor hearth or wall tilling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L for 15 mm thick screed bed or bedding layer of morter for laying floor finishes CM 1:6 complete all as specified and directed.
M&L for vitrified ceramic light shade coloured 10 mm thick (square/Rectangular) polished area of each tiles not exceeding 0.36 sqm in floors and skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.
M&L for non skid ceramic tiles 7-8 mm thick light shade (square/ rectangular) polished area of each tiles not exceeding 0.36 Sqm, in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.
All as per item No 32 here in before but as in dado/ skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick backing coat/ rendering in CM 1:3 for wall finishes complete all as specified and directed.
M&L for Non- skid Ceramic coloured joint free tiles 7 to 8mm thick (square/Rectangular) area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.
M&L for Non- skid Ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by Engineer-in- Charge.
M&L glazed ceramic coloured digital tiles 450x300mm x 7mm thick in vertical surface etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick backing coat of CM 1:4 etc complete all as specified and directed.
Taking up or down 15mm dia steel tubing and connection including cleaning for refixing or removal to store complete all as specified and directed.
All as per item No 37 here in before but 20 mm dia all as specified.
S&F 15 mm dia steel tubing medium grade galvanised with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.
All as per item No 39 here in before but 20 mm dia.
S&F in repair Fancy type CP Long shunk bib taps 15 mm dia, chromium plated cast copper alloy with half turn type capstan heads, screwed down screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.
S&F in repair 15 mm bore pillar taps fancy type ,cast copper alloy, with capstain head, chromium plated, screwed down, high pressure, with or without letters cold or hot with long shank and fly nuts screwed for iron pipe and fixed complete all as specified and directed.
S&F in repair Fancy type CP stop/angular cock 15mm dia cast copper alloy, chromium plated fency type screwed down high pressure with half turn type capstan heads, screwed both end for iron pipe or for unions and fixed complete all as specified and directed .
S&F in repair Fancy type CP stop valve 15mm dia cast copper alloy, chromium plated fency type with long shank and cup (concealed type) screwed down high pressure with half turn type capstan heads, screwed both end for iron pipe or for unions and fixed complete all as specified and directed.
S&F 32mm CP Brass bottle traps for wash basins with inlet and outlet screwed for pipe or connection including necessary packing, union and cap and fixed complete all as specified and directed.
S&F in repair 75 mm dia outlet CI nahani trap plain with S/S grating including jointing with solvent cement complete all as specified and directed.
S&F in repairs Vitreous china wash basin with pedestal flat back size 630X450 mm white, excluding taps, waste ,chain and plug and chain porcelain stopper but including brackets cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed.
S&F in repair 125 mm dia Fancy type CP shower rose complete all as specified and directed by Engineer-in-Charge.
S&F SS shop dish of size 100mm complete all as specified and directed by Engineer-in-Charge.
S&F PVC cabinet with mirror of size 450mmx600mm complete all as specified and directed.
Supply and fixing PVC valveless, syphonic action type flushing cistern, 10 ltr capacity, low level, white, with inlet, ball valve, float and handle including bracket, complete all as specified and directed.
S&F in repair chromium plated Tubular towel rail, 20mm dia, D type, 60cm long including bracket/flanges complete all as specified and directed.
S&F PVC water connection 600 mm long to wash basin of 15mm dia including PTMT nuts and washers complete all as specified and directed by Engineer-in-Charge.
S & F in repair vitreous china squatting pan 'Orissa pattern of size 580 x 440 mm white with integral foot rest( excluding flushing cistern and flush pipe) squatting pan including connecting to 'P' trap and to flushing pipe complete all as specified and directed.
M&L for provision of false ceiling at height of 600x600x15 mm mineral fibre ceiling tiles RH-99 of type micro looks edge laid on super fine XL 15mm expose d grid systems with 15mm wide T- section flanges. The frame work comprises of main runner of size 15x32x3000 mm spaced at 1200 mm centre securing fixed to the structural soffits by approved hangers at 1200mm maximum centers. Hangers (GI wire of 4.0mm dia) to be fixed by approved roof plug, level adjusters and screws etc. The last hanger at the end of each main runner should not be greater than 450mm from the adjacent wall flush fitting 1200mm long cross tees of size 15x26x1200 mm to be interloched between main runners at 600mm centers to form a 1200mm x 600 mm module. Cut cross tees longer than that 600mm to be supported independently. 600 mm x 600 mm modules to be formed by fitting 600mm long flush fitting cross tees of size 15x26x600 mm centrally between the 1200mm crosstees perimeter wall angle of size 19x19x3000 mm secured to wall at 450mm maximum centres. Finally RH-99 mineral fibre tile 15mm thick micro look edge has to be laid on the 600mm x 600mm module. Make : Armstrong or equivalent make approved by GE complete all as specified and directed.
Taking down chowkats or frame exc 1.5 Sqm and n exc 4Sqm each (without taking off shutter from the frame) complete all as specified and directed.
Taking down chowkats or frame n exc 1.5 Sqm each (without taking off shutter from the frame) complete all as specified and directed.
M&L Aluminium powder coated (powder coated of requried colour) three track sliding windows frame top & sides of size 92x31.75x1.50mm (section No 20831), bottom size 92x31.75x1.50mm (section No 20832) and shutter top & bottom of size 40x18x1.55mm (section No 20736) and sides (handle) of size 40x18x1.55mm (section No 20738) and lock side shutter frame of size 40x18x1.45mm ( section No 20737)" with rubber gasket, beading and locking arrangement and rollers etc including making good to the disturbed portion complete including stainless steel wire mesh 0.36mm nominal dia of wire with 1.40mm average aperture and fixed with stainless steel wire staples and fixing 5mm thick glass with necessary rubber beading gasket etc complete all as specified and directed.
S&F for aluminium ventilator, louvers type, frame top & bottom of size 31x42x1.60mm (section No 20558) rectangular tub of size 40x20x2mm (section No 14019 and middle vertical of size 42x46.20x1.60mm Section (20560) and clip for fixing wire mesh and glass of size 19x17.30x0.90mm (section No 19360) thick including stainless steel wire cloth 0.36mm nomonal dia of wire and 1.40mm average width of aperture and fixed with stainless steel wire staples and supply and fixing 5mm thick forsted/pinheaded glass louvers with blades of 100mm heavy duty with necessary rubber beading, gasket etc complete all as specified and directed.
S&F aluminium anodised grill of 7.00 mm dia squares rectangular triangular circular shape aperture n.exc 7.00cm in length or width fixed with H or F channel make grill No. 20 of décor or equivalent as as approved by GE.
M & L for Aluminium doors, powder coated (of approved colour), with frame of section 100 x 44mm x 2.5mm thick and shutter with bottom rail of section 150 x 44.5 x 2.5mm thick, middle rail of section 85 x 44.5 x 2.5mm thick and top rail of section 80.4 x 44.5 x 2.5mm thick and styles of section 80.4 x 44.5 x 2.5mm thick with 5mm thick glass (plain/tinted/with laminated film) or prelaminated board fixed in position with aluminium beading including necessary rubber gaskets and 2 Nos. aluminium push plate handle of aluminium section 150mm wide and 2.5mm thick including 150mm aluminium tower bolt, brass mortice lock complete all as per Drawing No. CEAA/TD/63 sheet No. 2.2 complete all as specified and directed.
S&F for solid PVC door frame of size 50mm x 47mm made out of 5mm prelam colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specifications & drawings complete all as specified and directed.
S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2,4 or 6 raised panel designed with 4mm thick moulded PVC sheet on front face and 2mm plain colour PVC sheet on back face as per specification and drawing complete all as specified and directed.
S&F 75mm long SS butt hinges and fixed to frame with scrwewd or welding complete all as specified and directed.
S&F for 200mm long aluminium anodized barrel tower bolts of extruded section and fixed complete all as specified and directed.
S&F aluminium alloy anodized sliding door bolt with haps and staple (bolt type) and fixing clip of sheet cast or extruted section or cast aluminium alloy and fixed length of bolt 300mm complete all as specified and directed.
S&F for 150mm long aluminium handle cast type anodized complete all as specified and directed by Engineer-in-Charge.
M&L for 30mm thick flush shutter , solid core construction, with block board core and plywood face panel,commercial type on both sides, kiln seasoned and chemically pressed treated and complete all as specified and directed by Engineer- in -Charge.
M&L for preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid and bedded and pointed in any mortar complete all as specified and directed.
M&L 25mm thick PCC 1:2:4 type B1 (20mm graded aggregate) as in levelling course complete all as specified and directed.
M&L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.
S&F Vitreous China Bowl Urinal flat back, size of 465x355x265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe ) complete all as specified and directed.
S&F Health faucet (ABS) with rubit cleaning system 1.25m long PVC flexible tube & ABS wall hook complete all as specified and directed.
S&F Stainless steel grating with or without hole of size 150 mm complete all as specified and directed.
S&F in repair PVC waste pipe of 32mm dia complete all as specified and directed.
Dismantling water tanks and exc 500 but n exc 750 litre capacity complete all as specified and directed.
S & F 15 mm Ball brass valves, high pressure with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.
S&F rotational moulded water storage tank 750 ltr capacity double layer (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.
M&L 15-18 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platform sand like in cement mortar (1:4) including moulding and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. including Screed bed or bedding layer of mortar 15 mm thick in CM 1:6 for laying floor finishes complete all as specified and directed.
S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and waste coupling; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engineer-in-Charge.
Taking down CI pipe 100mm/75mmof any description complete all as specified and directed by Engineer-in-Charge.
S&F for CI waste and vent pipes in any length with or without ears, fixed to wall dia of pipe 100mm complete all as specified and directed by Engineer-in-Charge.
All as per item No 84 above but 75mm dia in floor complete all as specified and directed.
S&F 100mm cast iron sanitary connection-short connection pipe of length upto 300-450mm socket to fit WC out-let etc. complete all as specified and directed.
S&F 75mm cast iron sanitary connection-short connection pipe of length upto 300-450mm socket to fit WC out-let etc. complete all as specified and directed.
M&L for bends of any type radius diminishing pieces or tapes (large bore measured) of 75mm dia bore with oval access doors etc. complete all as specified and directed.
S&F cast iron bend 100mm bore (any radius) dimnishing pieces or tapers with oval access doors etc. complete all as specified and directed.
M&L for branch pices single (equal and unequal) ordenary or incerted (spigot or socket type) or with parallel branch of 75mm dia with oval access door complete all as specified and directed.
S&F 100mm bore Branch piece, single (equal or unequal ) ordinary or inverted (spigot or socket type) with parallel branches with oval access door complete all as specified and directed.
S&F CI cowls of 100mm complete all as specified and directed.
Demolition of wall of brick and stone wall built in cement mortor incl all quoins, archs, pillars,etc complete all as specified and directed.
M&L for brick work sub class B bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.
Demolition of reinforced cement concrete (reinforcement cut as requried to facilitate) complete all as specified and directed
M&L for mild steel TMT bars 6 to 8mm dia and cut to length bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire(annealed ) n less than 0.9mm dia or securing with clips and including welded with new reinforcement to existing reinforcement and grouting of beams/ columns/lintels etc complete all as specified and directed
M&L for reinforced cement concrete (nominal mix) Type B-1 1:2:4 (using 20mm garded stone aggregate) as in as slab suspended slab, chajjas, facia, shalves , plateform and the like complete all as specified and directed
M&L for formworks to sides and sofits of shelves, plateform and thle like rough finished surface of concrete complete all as specified and directed
S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe-290 Gde-E-165 complete all as specified and directed.
M & L for concealed point wiring complete with FRLS PVC insulated / unsheathed stranded copper conductor of wire 1.5 Sqmm , 1100 volt grade , alongwith one single core of same size stranded copper as continuous earth wire to common earth dolly, drawn through concealed conduit pipe fixed in concealed surface of wall/ceilling/false ceilling including cutting /chasing in wall as required with powder coated sheet metal terminal boxes of required sizes and thickness (factory made) sunk in wall only with 3.0mm thick laminated sheet where as required and accessories complete. Incl taking down old u/s point wiring. suitable for the following :- One light/fan point controlled by one, one way switch
All as per item No 100 here in before but one socket outlet 05 Amps on the same board complete all as specified and directed.
All as per item No 100 here in before but one socket outlet 05 Amps on independent board complete all as specified and directed.
All as per item No 100 here in before but point wiring with 2.5 Sqmm cable and 2.5 Sqmm earth continuity conductor for 3 pin 15 Amp socket and complete all as specified and directed.
S&F in repair 8 way sheet metal enclosures for flush/surface mounting distribution board double door, 240 volts factory made and tested complete, suitable for mounting MCBs with 200 Amps rated bus bar, cable lugs complete all as specified and directed.
S&F in repair 12 way sheet metal enclosures for flush/surface mounting distribution board double door, 415 volts factory made and tested complete, suitable for mounting MCBs with TPN 300 Amps rated bus bar, cable lugs complete all as specified and directed.
S&F in replacement of miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP 240V, 10 KA 'C' curve, in the DB Complete with connection testing and commissioning complete all as specified and directed.
All as per item No 106 here in before but SP 40 AMP capacity
All as per item No 106 here in before but TPN 40 to 100 AMP capacity ,415 volt.
S&F Switch piano, single pole one way 5 Amps 240 volt capacity flush type complete all as specified and directed.
S&F 3 pin 5 Amps Socket outlet, flush type complete all as specified and directed.
S&F 5 pin, 5 Amps switch & socket combination flush type multipurpose 3 pin, 5 Amp flush type universal complete all as specified and directed.
Supply and fix 3 pin 15 Amps switch socket combination, flush type multi purpose 2 in 1 type (3 pin 5 Amps and 15 Amps) complete all as specified and directed.
S& F ceiling rose, 5 Amps surface type 240 volts bakelite three terminal as ordered complete all as specified and directed.
S&F fan regulator electronic step type 230 volts suitable for any type of ceiling fan sweep complete all as specified and directed.
M&L for concealed sub main wiring four run of 06 Sqmm single core PVC insulated, FRLS, flexible multi stranded copper conductor cable 1100 volts grade, drawn through and in concealed conduit pipe including two run of 6.0 Sqmm single core PVC insulated, FRLS , flexible copper cable as earth continuity conductor in green colour all as specified and as directed. Incl taking down old u/s sub main wiring. Note- (a) Four runs of single core cable with two run of earth continuity cable will be measured and paid as one unit. (b) Make disturbed surface good to wall/floors .
M&L for concealed sub main wiring of two run with 04 Sqmm single core PVC insulated, FRLS, flexible multi stranded copper conductor cable 1100 volts grade, drawn through and in existing conduit pipe including one run of 4.0 Sqmm single core PVC insulated, FRLS , flexible copper cable as earth continuity conductor in green colour all as specified and as directed. Incl taking down old u/s sub main wiring. Note- (a) Two runs of single core cable with one run of earth continuity cable will be measured and paid as one unit. (b) Make disturbed surface good to wall/floors .
Supply & fix on wall ,Triple pole and earth encolsure in sheet steel enclosure with a three pin and earth plug with socket complete with one triple pole MCB of 32 Amp capacity for 3 Phase supply complete all as specified and directed.
S & F in replacement of LED batten fitting alongwith removable LED Tube 20W, 230 Volt, 6000K, wall /ceiling mounted ,LED batten fixed by means of bolts,ABS rotor suitable for single side connections. LED rod having glass material complete haivng lumen efficacy minimum 100 lm/w,CCT 6500 K, powered by integral constant current driver suitable for 240 V AC with all accessories internallly prewired including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed.
S & F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.
Supply, laying & testing cable XLPE insulated, screened, PVC bendded galvanized steel strip or wire armoured electric power cables (heavy duty) with stranded aluminium conductor 1100 volts grade, of size 50 sq mm. 3.5 core complete all as specified and directed.
Excavation in trenches not exceeding 1.5m width and not exceeding 1.5 m in depth and getting out in soft/loose soil for taking up/laying cable/pipe etc complete all as specified and directed.
Returning, filling including spreading, leveling watering & well ramming in laying for not exc. 25 cm thick for soft/ loose soil complete all as specified and directed.
Removal of excavated material at a distance not exc 50 mtr and dipositing where directed at a level not exc. 1.5 mtr above the starting point for soft/loose soil complete all as specified and directed.
M & L for dry Sand cushioning to underground cable with screened, washed river sand, including punning gently complete all as specified and directed. Note: - Thickness after punning will be measured for payment.
Supply and lay burnt brick sub class `B' old size in trenches abouting each other width equal to length of brick etc complete all as specified and directed.
Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and directed.
Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm sweep complete all as specified and directed.
Supply and fixing in repair LED flood light 70 watt 230 VAC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp.
Supply and fixing in repair round shape recess mounted cap 10 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete.
Supply and fix electric water heater,storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and directed.
Supply & fix Air Circulator fans 230 volts single phase oscillating 450 mm sweep suitable for wall mounting complete all as specified and directed.
Sharnamsingh and Co
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .