Interior, Furniture and Audio Visual work for the Administrative Building, Seminar Hall of Administrative Building and some part of Central Library at GTU New Campus Village Lekawada, Dist. Gandhinagar.

Name of Work: Interior, Furniture and Audio Visual work for the Administrative Building, Seminar Hall of Administrative Building and some part of Central Library at

GTU New Campus Village Lekawada, Dist. Gandhinagar

Estimated Rate With 1% Labour Cess

in Rs. (Excluding GST)

Quantity but Total Amount in

Quantity but Total Amount in

Item No. Description Unit

may be more or Rs.

In Figures In Words

Providing And Supply High Back Rev. Chair Upholstered with Leatherette Seat Made Up Of 12mm +/- 1mm Thick Hot Pressed Mr.

Grad Plywood and Back in Two Pieces - 12mm Rear Back And 6mm Inner Back. Moulden Polyurethane Foam Used in Making Seat

with Molded Density 45+/- 2 Kg/M ³. Back Is Made Out Of 32 Density Block Foam Covered With 14mm Thick 32 Density Foam Sheet

(Block Foam). Spine Bracket Made Of M.S Plate 8mm Thickness Connecting Back with Mechanism. Armrest Top Is Soft Touch

Polyurethane Molded Of 250 To 300 Density Insert Stainless Steel Pipe Having Unique " Y "Shape. The Mechanism of the Chair Have

Following Features: 360⁰ Revolving Type 3.5Mm Thk Crca Seat Plate With 4Mm Thk Crca Channel Plate Synchro Mechanism, Tilt

Rupees Eleven Thousand

Tension Adjustable, Single Position Locking, Plastic Component Inside the Mechanism of Grade - Mi 3530 And Epoxy Powder Coated

1 65 11393.33 Three Hundred NinetyThree Nos.

70 Microns with Tested 1.2 Lacs Cycles as Per Bifma Standard. The Chair Provided with Pneumatic Height Adjustment Which Have

Paise ThirtyThree Only

Have Stroke Of 100mm +/- 5mm.The Five Leg Base Is Made Up Of 38Mm Dia X 1.2Mm Thick Tubular With 3.15mm Thick Centre Hub

Crc Fabricated Chrome Finish. It Have Be Fitted With 50mm Dia Twin Wheel Castor . The Size of The Base Have Be - 660 +/- 1mm

Pitch-Centre-Diameter. Load Test As Per Bifma Compliance. The Twin Wheel Castors Made Of Nylon Injection Molded In Black Color.

Overall Dimensions Of Chair Have Be, Width Of Chair - 640mm, Depth Of Chair 640mm As Measured From Base Below. Height Of

Back From Ground - Min 1175 To Max 1275mm. Seat Height -Min 480mm To Max 580mm. Dimensions Tolerance / Variations Have

Be Within +/- 10mm.

"C" shaped table overall dimension 2250x1600x2800mm & 750mm height with 36 MM thick nail curvica post forming edges made of

17mm OSR MDF with curvica laminate finish both long edges with ends having matching 2mm pvc edge band / beading, bottom

surface to be finished with balancer white. Provision to be given for snake / vertebrae from floor to wire manager for pop up box with

switches and sockets as per detail design and drawings. Fixed Drawer Unit Outer body 17mm thick MDF with curvica Laminate Finish.

three drawers with bullnose front with lock and necessary hardware. Side Table : Size as per drawings, Top and leg 36 MM thick nail

curvica post forming edges made of 17mm OSR MDF with curvica laminate finish both long edges with ends having matching 2mm Rupees NinetyThree

2 1 pvc edge band / beading. shutter 17mm thick OSR MDF with curvica Laminate Finish bullnose curvica laminate finish with lock and 93404.8 Thousand Four Hundred Four Nos.

necessary hardware. Back Unit size as per drawing Top and leg 36 MM thick nail curvica post forming edges made of 17mm OSR Paise Eighty Only

MDF with curvica laminate finish both long edges with ends having matching 2mm pvc edge band / beading. shutter 17mm thick OSR

MDF with curvica Laminate Finish bullnose curvica laminate finish with lock and necessary hardware. Entire table to be finished with

all necessary hardware. There will be provision of footrest of size 750 x 400 x 150mm & storage top side and back unit top having a

ledge of 150mm x 100mm boxing as shown in image included in it. All hardware should be concealed & not visible. All handles should

be concealed with SS finish.

Estimated Rate With 1% Labour Cess

in Rs. (Excluding GST)

Quantity but Total Amount in

Quantity but Total Amount in

Item No. Description Unit

may be more or Rs.

In Figures In Words

"C" shaped table overall dimension 2250x2000x2800mm & 750mm height with 36 MM thick nail curvica post forming edges made of

17mm OSR MDF with curvica laminate finish both long edges with ends having matching 2mm pvc edge band / beading, bottom

surface to be finished with balancer white. Provision to be given for snake / vertebrae from floor to wire manager for pop up box with

switches and sockets as per detail design and drawings. Fixed Drawer Unit Outer body 17mm thick MDF with curvica Laminate Finish.

three drawers with bullnose front with lock and necessary hardware. Side Table : Size as per drawings, Top and leg 36 MM thick nail

curvica post forming edges made of 17mm OSR MDF with curvica laminate finish both long edges with ends having matching 2mm Rupees NinetySix Thousand

3 10 pvc edge band / beading. shutter 17mm thick OSR MDF with curvica Laminate Finish bullnose curvica laminate finish with lock and 96323.7 Three Hundred TwentyThree Nos.

necessary hardware. Back Unit size as per drawing Top and leg 36 MM thick nail curvica post forming edges made of 17mm OSR Paise Seventy Only

MDF with curvica laminate finish both long edges with ends having matching 2mm pvc edge band / beading. shutter 17mm thick OSR

MDF with curvica Laminate Finish bullnose curvica laminate finish with lock and necessary hardware. Entire table to be finished with

all necessary hardware. There will be provision of footrest of size 750 x 400 x 150mm & storage top side and back unit top having a

ledge of 150mm x 100mm boxing as shown in image included in it. All hardware should be concealed & not visible. All handles should

be concealed with SS finish.

"C" shaped table overall dimension 2250x1800x2900mm & 750mm height with 36 MM thick nail curvica post forming edges made of

17mm OSR MDF with curvica laminate finish both long edges with ends having matching 2mm pvc edge band / beading, bottom

surface to be finished with balancer white. Provision to be given for snake / vertebrae from floor to wire manager for pop up box with

switches and sockets as per detail design and drawings. Fixed Drawer Unit Outer body 17mm thick MDF with curvica Laminate Finish.

three drawers with bullnose front with lock and necessary hardware. Side Table : Size as per drawings, Top and leg 36 MM thick nail

curvica post forming edges made of 17mm OSR MDF with curvica laminate finish both long edges with ends having matching 2mm Rupees NinetySix Thousand

4 4 pvc edge band / beading. shutter 17mm thick OSR MDF with curvica Laminate Finish bullnose curvica laminate finish with lock and 96323.7 Three Hundred TwentyThree Nos.

necessary hardware. Back Unit size as per drawing Top and leg 36 MM thick nail curvica post forming edges made of 17mm OSR Paise Seventy Only

MDF with curvica laminate finish both long edges with ends having matching 2mm pvc edge band / beading. shutter 17mm thick OSR

MDF with curvica Laminate Finish bullnose curvica laminate finish with lock and necessary hardware. Entire table to be finished with

all necessary hardware. There will be provision of footrest of size 750 x 400 x 150mm & storage top side and back unit top having a

ledge of 150mm x 100mm boxing as shown in image included in it. All hardware should be concealed & not visible. All handles should

be concealed with SS finish.

"C" shaped table overall dimension 2250x1800x2400mm & 750mm height with 36 MM thick nail curvica post forming edges made of

17mm OSR MDF with curvica laminate finish both long edges with ends having matching 2mm pvc edge band / beading, bottom

surface to be finished with balancer white. Provision to be given for snake / vertebrae from floor to wire manager for pop up box with

switches and sockets as per detail design and drawings. Fixed Drawer Unit Outer body 17mm thick MDF with curvica Laminate Finish.

three drawers with bullnose front with lock and necessary hardware. Side Table : Size as per drawings, Top and leg 36 MM thick nail

curvica post forming edges made of 17mm OSR MDF with curvica laminate finish both long edges with ends having matching 2mm Rupees NinetyThree

5 7 pvc edge band / beading. shutter 17mm thick OSR MDF with curvica Laminate Finish bullnose curvica laminate finish with lock and 93404.8 Thousand Four Hundred Four Nos.

necessary hardware. Back Unit size as per drawing Top and leg 36 MM thick nail curvica post forming edges made of 17mm OSR Paise Eighty Only

MDF with curvica laminate finish both long edges with ends having matching 2mm pvc edge band / beading. shutter 17mm thick OSR

MDF with curvica Laminate Finish bullnose curvica laminate finish with lock and necessary hardware. Entire table to be finished with

all necessary hardware. There will be provision of footrest of size 750 x 400 x 150mm & storage top side and back unit top having a

ledge of 150mm x 100mm boxing as shown in image included in it. All hardware should be concealed & not visible. All handles should

be concealed with SS finish.

Estimated Rate With 1% Labour Cess

in Rs. (Excluding GST)

Quantity but Total Amount in

Quantity but Total Amount in

Item No. Description Unit

may be more or Rs.

In Figures In Words

"C" shaped table overall dimension 2250x1800x2700mm & 750mm height with 36 MM thick nail curvica post forming edges made of

17mm OSR MDF with curvica laminate finish both long edges with ends having matching 2mm pvc edge band / beading, bottom

surface to be finished with balancer white. Provision to be given for snake / vertebrae from floor to wire manager for pop up box with

switches and sockets as per detail design and drawings. Fixed Drawer Unit Outer body 17mm thick MDF with curvica Laminate Finish.

three drawers with bullnose front with lock and necessary hardware. Side Table : Size as per drawings, Top and leg 36 MM thick nail

curvica post forming edges made of 17mm OSR MDF with curvica laminate finish both long edges with ends having matching 2mm Rupees NinetySix Thousand

6 19 pvc edge band / beading. shutter 17mm thick OSR MDF with curvica Laminate Finish bullnose curvica laminate finish with lock and 96323.7 Three Hundred TwentyThree Nos.

necessary hardware. Back Unit size as per drawing Top and leg 36 MM thick nail curvica post forming edges made of 17mm OSR Paise Seventy Only

MDF with curvica laminate finish both long edges with ends having matching 2mm pvc edge band / beading. shutter 17mm thick OSR

MDF with curvica Laminate Finish bullnose curvica laminate finish with lock and necessary hardware. Entire table to be finished with

all necessary hardware. There will be provision of footrest of size 750 x 400 x 150mm & storage top side and back unit top having a

ledge of 150mm x 100mm boxing as shown in image included in it. All hardware should be concealed & not visible. All handles should

be concealed with SS finish.

"C" shaped table overall dimension 2250x1800x3300mm & 750mm height with 36 MM thick nail curvica post forming edges made of

17mm OSR MDF with curvica laminate finish both long edges with ends having matching 2mm pvc edge band / beading, bottom

surface to be finished with balancer white. Provision to be given for snake / vertebrae from floor to wire manager for pop up box with

switches and sockets as per detail design and drawings. Fixed Drawer Unit Outer body 17mm thick MDF with curvica Laminate Finish.

three drawers with bullnose front with lock and necessary hardware. Side Table : Size as per drawings, Top and leg 36 MM thick nail

curvica post forming edges made of 17mm OSR MDF with curvica laminate finish both long edges with ends having matching 2mm Rupees One Lakh Seven

7 3 pvc edge band / beading. shutter 17mm thick OSR MDF with curvica Laminate Finish bullnose curvica laminate finish with lock and 107999.3 Thousand Nine Hundred Nos.

necessary hardware. Back Unit size as per drawing Top and leg 36 MM thick nail curvica post forming edges made of 17mm OSR NinetyNine Paise Thirty Only

MDF with curvica laminate finish both long edges with ends having matching 2mm pvc edge band / beading. shutter 17mm thick OSR

MDF with curvica Laminate Finish bullnose curvica laminate finish with lock and necessary hardware. Entire table to be finished with

all necessary hardware. There will be provision of footrest of size 750 x 400 x 150mm & storage top side and back unit top having a

ledge of 150mm x 100mm boxing as shown in image included in it. All hardware should be concealed & not visible. All handles should

be concealed with SS finish.

TABLE SIZE L shaped : overall dimension -1600 x 1725 & 750mm height

Providing and supply Top 36 & Side 18 mm thick made of PLY with both side laminate finish with 2 mm thick PVC edge bidding

matching with same laminate finish. Apron 18mm thick PLY board with 1mm thick laminate finish with 2 mm thick PVC edge matching

with laminate bidding, under structure made of 50x50mmx1.6mm thick MS square pipe with powder coated (50-60 micron) finish, Side Rupees FourtyNine Thousand

8 9 Table : Size as per drawings, Top 25mm thick PLY with 1 mm thick laminate finish with 2mm thick pvc edge bidding matching with 49621.3 Six Hundred TwentyOne Nos.

laminate finish. Shutters , Side, shelf 18mm thick PLY with 1 mm thick laminate finish with 2mm thick pvc edge bidding matching with Paise Thirty Only

laminate finish. Back 8mm thick PLY with 1 mm thick laminate finish. There is provision of Fix pedestal unit of size 420x450x650mm

having one swing shutter storage and drawer which run on Telescopic Channel with lock and other necessary hardware and fittings.

All hardware should be concealed & not visible. All handles should be concealed with SS finish.

TABLE SIZE L shaped : overall dimension -1950 x 1500 & 750mm height

Providing and supply Top 36 & Side 18 mm thick made of PLY with both side laminate finish with 2 mm thick PVC edge bidding

matching with same laminate finish. Apron 18mm thick PLY board with 1mm thick laminate finish with 2 mm thick PVC edge matching

with laminate bidding, under structure made of 50x50mmx1.6mm thick MS square pipe with powder coated (50-60 micron) finish, Side Rupees FiftyTwo Thousand

9 6 Table : Size as per drawings, Top 25mm thick PLY with 1 mm thick laminate finish with 2mm thick pvc edge bidding matching with 52540.2 Five Hundred Fourty Paise Nos.

laminate finish. Shutters , Side, shelf 18mm thick PLY with 1 mm thick laminate finish with 2mm thick pvc edge bidding matching with Twenty Only

laminate finish. Back 8mm thick PLY with 1 mm thick laminate finish. There is provision of Fix pedestal unit of size 420x450x650mm

having one swing shutter storage and drawer which run on Telescopic Channel with lock and other necessary hardware and fittings.

All hardware should be concealed & not visible. All handles should be concealed with SS finish.

Estimated Rate With 1% Labour Cess

in Rs. (Excluding GST)

Quantity but Total Amount in

Quantity but Total Amount in

Item No. Description Unit

may be more or Rs.

In Figures In Words

Supplying And Fixing LTypeWork station • 1500x1500x750 Standard table top height – 750mm min (including table top thickness of

25mm)Table top made of 25mm thk prelam MDF of pre approved colour fixed at a standard table top height of upto 750mm min Table

top to be principally mounted from the partition frame with suitable MS powder coated brackets which should be integrated into the

partition frame without screw fixing. Gable End Supports of approved profile and design between tables consisting of 18mm pre-lam

board panels duly edge bound to be integrated with the partition system without screw fixing.Intermediate supports of approved profile

and design between tables consisting of 18mm pre-lam board panels duly edge bound ) to be integrated with the partition system

Rupees FourtyThree

without screw fixing. Adjustable floor levellers required for table top support panel Table top to be provided with ABS wire manager at

10 285 43053.78 Thousand FiftyThree Paise Nos.

designated location as per pre-approved sample. MS powder coated partition panels of thickness 60, with powder coated MS frames

SeventyEight Only

inside of 16 guage.Infills are of partical board with cladding of 9mm thk prelam MDF tiles on both sides.Fascia/surface of the panel can

be given in fabric/soft board/ white board/half glass. All exposed profiles, connectors are in powder coated aluminium. The horizontal

bottom of each panel will be given with an inbuilt wire management system of 100mm ht covered by MS powder coated raceway

panel. A pair of Level adjusters are provided with each panel.Product certification: ISO 9001, ISO 14001 & ISO 45001 (Certifying

agencies of ISO should be accredited by” NABCB” ), AIOTA office furniture, IGBC, BIFMA Membership and Green Pro (CII)

certificate.BIFMA Test Report: ANSI/BIFMA X5.5-2021 For: Desk & Table Products Executive Desk/Office Table.

TABLE SIZE L shaped : overall dimension -1925 x 1800 & 750mm height

Providing and supply Top 36 & Side 18 mm thick made of PLY with both side laminate finish with 2 mm thick PVC edge bidding

matching with same laminate finish. Apron 18mm thick PLY board with 1mm thick laminate finish with 2 mm thick PVC edge matching

with laminate bidding, under structure made of 50x50mmx1.6mm thick MS square pipe with powder coated (50-60 micron) finish, Side Rupees FiftyFive Thousand

11 3 Table : Size as per drawings, Top 25mm thick PLY with 1 mm thick laminate finish with 2mm thick pvc edge bidding matching with 55459.1 Four Hundred FiftyNine Paise Nos.

laminate finish. Shutters , Side, shelf 18mm thick PLY with 1 mm thick laminate finish with 2mm thick pvc edge bidding matching with Ten Only

laminate finish. Back 8mm thick PLY with 1 mm thick laminate finish. There is provision of Fix pedestal unit of size 420x450x650mm

having one swing shutter storage and drawer which run on Telescopic Channel with lock and other necessary hardware and fittings.

All hardware should be concealed & not visible. All handles should be concealed with SS finish.

TABLE SIZE Linear shaped :-1350 x 600 & 750mm height

Providing and supply Top 36 mm thick made of PLY with 1 mm thick laminate finish with 2 mm thick PVC edge bidding matching with

Rupees Seventeen Thousand

same laminate finish. Apron 18mm thick PLY board with 1mm thick laminate finish with 2 mm thick PVC edge matching with laminate

12 2 17513.4 Five Hundred Thirteen Paise Nos.

bidding, under structure made of 50x50mmx1.6mm thick MS square pipe with powder coated (50-60 micron) finish. WIRE

MANAGEMENT MS-Powder coated wire tray with pop up box switch plate and vertical cable raisers / PVC wire guard are considered

for wire management.

TABLE SIZE Linear shaped :-1200 x 600 & 750mm height

Providing and supply Top 36 mm thick made of PLY with 1 mm thick laminate finish with 2 mm thick PVC edge bidding matching with

Rupees Seventeen Thousand

same laminate finish. Apron 18mm thick PLY board with 1mm thick laminate finish with 2 mm thick PVC edge matching with laminate

13 141 17513.4 Five Hundred Thirteen Paise Nos.

bidding, under structure made of 50x50mmx1.6mm thick MS square pipe with powder coated (50-60 micron) finish. WIRE

MANAGEMENT MS-Powder coated wire tray with pop up box switch plate and vertical cable raisers / PVC wire guard are considered

for wire management.

TABLE SIZE Linear shaped :-900 x 750 & 750mm height

Providing and supply Top 36 mm thick made of PLY with 1 mm thick laminate finish with 2 mm thick PVC edge bidding matching with

same laminate finish. Apron 18mm thick PLY board with 1mm thick laminate finish with 2 mm thick PVC edge matching with laminate Rupees Fourteen Thousand

bidding, under structure made of 50x50mmx1.6mm thick MS square pipe with powder coated (50-60 micron) finish. WIRE Ten Paise SeventyTwo Only

MANAGEMENT MS-Powder coated wire tray with pop up box switch plate and vertical cable raisers / PVC wire guard are considered

for wire management.

Estimated Rate With 1% Labour Cess

in Rs. (Excluding GST)

Quantity but Total Amount in

Quantity but Total Amount in

Item No. Description Unit

may be more or Rs.

In Figures In Words

TABLE SIZE Linear shaped :-900 x 600 & 750mm height

Providing and supply Top 36 mm thick made of PLY with 1 mm thick laminate finish with 2 mm thick PVC edge bidding matching with

Rupees Twelve Thousand

same laminate finish. Apron 18mm thick PLY board with 1mm thick laminate finish with 2 mm thick PVC edge matching with laminate

15 6 12843.16 Eight Hundred FourtyThree Nos.

bidding, under structure made of 50x50mmx1.6mm thick MS square pipe with powder coated (50-60 micron) finish. WIRE

Paise Sixteen Only

MANAGEMENT MS-Powder coated wire tray with pop up box switch plate and vertical cable raisers / PVC wire guard are considered

for wire management.

CENTER TABLE SIZE:-1100 x 600 & 450mm height

Providing fixing and arranging Center Table Providing and supply Top 20 mm thick made of PLY with 1 mm thick laminate finish with 2 Rupees Fifteen Thousand

16 2 mm thick PVC edge bidding matching with same laminate finish. 15762.06 Seven Hundred SixtyTwo Nos.

STRUCTURAL SUPPORT SYSTEM:- shall be constructed using 40 x 40 mm matt finish S.S. Metal frame legs as per image. Entire Paise Six Only

table to be finished with all necessary hardware and selection of material as per architect.

CENTER TABLE SIZE:-750 x 600 & 450mm height

Providing fixing and arranging Center Table Providing and supply Top 20 mm thick made of PLY with 1 mm thick laminate finish with 2 Rupees Nine Thousand Nine

17 2 mm thick PVC edge bidding matching with same laminate finish. 9924.26 Hundred TwentyFour Paise Nos.

STRUCTURAL SUPPORT SYSTEM:- shall be constructed using 40 x 40 mm matt finish S.S. Metal frame legs as per image. Entire TwentySix Only

table to be finished with all necessary hardware and selection of material as per architect.

CENTER TABLE SIZE:-1200 x 1200 & 450mm height

Providing fixing and arranging Center Table Providing and supply Top 20 mm thick made of PLY with 1 mm thick laminate finish with 2 Rupees Twenty Thousand

18 3 mm thick PVC edge bidding matching with same laminate finish. 20432.3 Four Hundred ThirtyTwo Nos.

STRUCTURAL SUPPORT SYSTEM:- shall be constructed using 40 x 40 mm matt finish S.S. Metal frame legs as per image. Entire Paise Thirty Only

table to be finished with all necessary hardware and selection of material as per architect.

SIDE TABLE SIZE:-500 x 500 & 450mm height

Providing fixing and arranging Center Table Providing and supply Top 20 mm thick made of PLY with 1 mm thick laminate finish with 2 Rupees Eight Thousand One

19 8 mm thick PVC edge bidding matching with same laminate finish. 8172.92 Hundred SeventyTwo Paise Nos.

STRUCTURAL SUPPORT SYSTEM:- shall be constructed using 40 x 40 mm matt finish S.S. Metal frame legs as per image. Entire NinetyTwo Only

table to be finished with all necessary hardware and selection of material as per architect.

SIDE TABLE SIZE:-300 x 300 & 450mm height

Providing fixing and arranging Center Table Providing and supply Top 20 mm thick made of PLY with 1 mm thick laminate finish with 2 Rupees Two Thousand Nine

20 1 mm thick PVC edge bidding matching with same laminate finish. 2918.9 Hundred Eighteen Paise Nos.

STRUCTURAL SUPPORT SYSTEM:- shall be constructed using 40 x 40 mm matt finish S.S. Metal frame legs as per image. Entire Ninety Only

table to be finished with all necessary hardware and selection of material as per architect.

COMMON ROOM TABLE SIZE:-1200 x 5700 & 750 mm height

Providing and supply Table- Work top considered in 25mm thick PLY with 1 mm thick laminate finish with 2 mm thick PVC edge Rupees One Lakh Thirteen

21 3 bidding matching with laminate finish. worktop height considered 750mm from ground level. Legs: Open type legs 50x50mm CRCA 113837.1 Thousand Eight Hundred Nos.

Pipe Under structure Metal Powder coated 50-60 micron finish. Metal powder coating under structure considered. one, 6 module Pop ThirtySeven Paise Ten Only

box soft close consider. etc all necessary hardware included.

CIRCULAR MEETING TABLE - 1200 mm DIA & 750 mm height

Providing fixing and arranging meeting Table Supplying and placing in position table having Top 25 mm thick made of PLY with 1 mm Rupees Fourteen Thousand

22 1 thick laminate finish with 2 mm thick PVC edge bidding matching with same laminate finish End Legs: MS powder coated square 14594.5 Five Hundred NinetyFour Nos.

perform legs (50X50 mm) as per shape shown in image. Wire Management: 300mm Aluminium Flip Up and provision to mount Paise Fifty Only

switches and sockets on PVC cable dump.Wire Entry: Vertical Wire Entry Cover or Vertebra etc complete

CAFE TABLE - 1000 x 1000 & 750 mm height.

Supplying and placing in position cafe table having Top 25 mm thick made of PLY with 1 mm thick laminate finish with 2 mm thick PVC

Rupees Thirteen Thousand

edge bidding matching with same laminate finish

23 22 13135.05 One Hundred ThirtyFive Paise Nos.

STRUCTURAL SUPPORT SYSTEM:- shall be constructed using matt finish S.S. Metal fame legs as per image. Entire table to be

finished with all necessary hardware and selection of material as per architect.

Estimated Rate With 1% Labour Cess

in Rs. (Excluding GST)

Quantity but Total Amount in

Quantity but Total Amount in

Item No. Description Unit

may be more or Rs.

In Figures In Words

CENTER TABLE SIZE:-2100 x 900 & 450 mm height.

Providing fixing and arrenging Center Table Providing and supply Top 20 mm thick made of PLY with 1 mm thick laminate finish with 2 Rupees TwentySix Thousand

24 6 mm thick PVC edge bidding matching with same laminate finish. 26853.88 Eight Hundred FiftyThree Nos.

STRUCTURAL SUPPORT SYSTEM:- shall be constructed using 40 x 20 mm matt finish S.S. Metal fame legs as per image & as Paise EightyEight Only

needed for structural stability. Entire table to be finished with all necessary hardware and selection of material as per architect.

Providing and supply work Table with MDU 1800 x2100 x 760mm Top 25 mm thick made of 19mm Thick Plywood with 4mm thick

Veneer finish with melamine polish in approved shade. The Leg & Apron 25mm thick made of 19mm Thick Plywood with 4mm thick

Rupees One Lakh ThirtyOne

Veneer finish with melamine polish in approved shade. The Side Table : Size 900 x 450 x 750 mm Top and leg 25 mm thick made of

25 4 131350.5 Thousand Three Hundred Nos.

19mm Thick Plywood with 4mm thick Veneer finish with melamine polish in approved shade. The Drawer Facia & shutter made of

Fifty Paise Fifty Only

19mm thick plywood with 4mm thick veneer finish in approved melamine polish. All Exposed edges finish with wooden beading with

polish finish. The Side Unit and MDU shall have lock and nessary hardware. The rate shall be inclusive of all material & labour.

CENTER TABLE SIZE:-1200 x 600 & 450mm height

Providing fixing and arrenging Center Table Providing and supply Top 20 mm thick made of PLY with 6 to8 mm thick natural veneer on

Rupees Sixteen Thousand

all sides front and back with double coat PU polish as per client's selection, bottom surface to be finished with 1mm thick laminate of

26 2 16345.84 Three Hundred FourtyFive Nos.

approved shade with 2 mm thick PVC edge bidding matching with same veneer finish.

Paise EightyFour Only

STRUCTURAL SUPPORT SYSTEM:- shall be constructed using 40 x 20 mm matt finish S.S. Metal fame legs as per image. Entire

table to be finished with all necessary hardware and selection of material as per architect.

CENTER TABLE SIZE:-500x500 & 450mm height

Providing fixing and arrenging Center Table Providing and supply Top 20 mm thick made of PLY with 6 to8 mm thick natural veneer on

Rupees Ten Thousand Five

all sides front and back with double coat PU polish as per client's selection, bottom surface to be finished with 1mm thick laminate of

27 2 10508.04 Hundred Eight Paise Four Nos.

approved shade with 2 mm thick PVC edge bidding matching with same veneer finish.

STRUCTURAL SUPPORT SYSTEM:- shall be constructed using 40 x 20 mm matt finish S.S. Metal fame legs as per image. Entire

table to be finished with all necessary hardware and selection of material as per architect.

CENTER TABLE SIZE:-dia. 700 & 450 mm height

Providing fixing and arrenging Center Table Providing and supply Top 20 mm thick made of PLY with6 to8 mm thick natural veneer on

Rupees Fourteen Thousand

all sides front and back with double coat PU polish as per client's selection, bottom surface to be finished with 1mm thick laminate of

28 8 14354.12 Three Hundred FiftyFour Nos.

approved shade with 2 mm thick PVC edge bidding matching with same veneer finish.

Paise Twelve Only

STRUCTURAL SUPPORT SYSTEM:- shall be constructed using 40 x 20 mm matt finish S.S. Metal fame legs as per image. Entire

table to be finished with all necessary hardware and selection of material as per architect.

CENTER TABLE SIZE:-1200 x 800 & 450 mm height

Providing fixing and arrenging Center Table Providing and supply Top 20 mm thick made of PLY with 6 to 8 mm thick Corian(solid

Rupees Fourteen Thousand

surface) on all sides front and back with mirror finish as per client's selection, bottom surface to be finished with 1mm thick laminate of

29 2 14594.5 Five Hundred NinetyFour Nos.

approved shade.

Paise Fifty Only

STRUCTURAL SUPPORT SYSTEM:- shall be constructed using 40 x 40 mm matt finish MS powder coated. Metal frame legs as per

image. Entire table to be finished with all necessary hardware and selection of material as per architect.

CENTER TABLE SIZE:-500 x 500 & 450 mm height

Providing fixing and arrenging Center Table Providing and supply Top 20 mm thick made of PLY with 6 to 8 mm thick Corian(solid

Rupees Thirteen Thousand

surface) on all sides front and back with mirror finish as per client's selection, bottom surface to be finished with 1mm thick laminate of

30 2 13426.94 Four Hundred TwentySix Nos.

approved shade.

Paise NinetyFour Only

STRUCTURAL SUPPORT SYSTEM:- shall be constructed using 40 x 40 mm matt finish MS powder coated. Metal frame legs as per

image. Entire table to be finished with all necessary hardware and selection of material as per architect.

Estimated Rate With 1% Labour Cess

in Rs. (Excluding GST)

Quantity but Total Amount in

Quantity but Total Amount in

Item No. Description Unit

may be more or Rs.

In Figures In Words

CENTER TABLE SIZE:-600 x 600 & 450 mm height

Providing fixing and arrenging Center Table Providing and supply Top 20 mm thick made of PLY with 6 to 8 mm thick Corian(solid

surface) on all sides front and back with mirror finish as per client's selection, bottom surface to be finished with 1mm thick laminate of Rupees Seven Thousand Five

approved shade. Paise ThirtySix Only

STRUCTURAL SUPPORT SYSTEM:- shall be constructed using 40 x 40 mm matt finish MS powder coated. Metal frame legs as per

image. Entire table to be finished with all necessary hardware and selection of material as per architect.

CENTER TABLE SIZE: -dia. 600 & 450 mm height

Providing fixing and arranging Center Table Providing and supply Top 20 mm thick made of PLY with 6 to 8 mm thick Corian (solid

surface) on all sides front and back with mirror finish as per client's selection, bottom surface to be finished with 1mm thick laminate of Rupees Seven Thousand Five

approved shade. Paise ThirtySix Only

STRUCTURAL SUPPORT SYSTEM: - shall be constructed using 40 x 40 mm matt finish MS powder coated. Metal frame legs as per

image. Entire table to be finished with all necessary hardware and selection of material as per architect.

Meeting Table :- dia. 1200 mm & 750 mm height (ovel shape)

TABLE TOP 40mm thick made of Ply wood with 6mm corian finish on exposed area with edges waterfall design. Legs: Metal Powder

coated legs 50mmx50mmx1.6mm : all Under structure: Metal powder coated with 50-60 micron: covered with modesty 20mm tick

Rupees One Lakh Two

made of ply with laminate finish with edge beading. Cable Management: Wire trunking to be provided made up of MS below worktop

33 1 102161.5 Thousand One Hundred Nos.

with clear data power seperation,Round wire manager to be provided on table top , single trunking system to be provided with

SixtyOne Paise Fifty Only

Electrical metal trench to take wires into the cable manager.etc. finish with all necessary hardware and material selection as per

architects. entire table to be finished with all necessary electric fixtures and necessary requirement of electrical items, hardware etc

complete with all respect.

Meeting Table :-1800 x 1200 & 750 mm height

TABLE TOP & Legs 40mm thick made of Ply wood with 4mm thick veneer and 6mm corian finishcombination as per design on Rupees One Lakh Nineteen

exposed area with edges waterfall design, Side unit and modesty 24mm thick veneer finish with wooden edge beading. Side unit Thousand Six Hundred

having drawer and shutter combination as per approved design including all necessary hardware and material selection as per SeventyFour Paise Ninety

architects. entire table to be finished with all necessary electric fixtures and necessary requirement of electrical items, hardware etc Only

complete with all respect.

STORAGE :-2400 x 450 & 750 mm height

TOP & Sides 24mm thick made of Ply wood with 4mm thick veneer and 6mm corian finish combination as per design on exposed

Rupees One Lakh Two

area, unit having shutter with groove combination as per approved design including all necessary hardware and material selection as

35 4 102161.5 Thousand One Hundred Nos.

per architects. entire table to be finished with all necessary electric fixtures and necessary requirement of electrical items, hardware

SixtyOne Paise Fifty Only

etc complete with all respect. Optional metal base combination as per image as suggested by engineer in charge or architect

Estimated Rate With 1% Labour Cess

in Rs. (Excluding GST)

Quantity but Total Amount in

Quantity but Total Amount in

Item No. Description Unit

may be more or Rs.

In Figures In Words

Providing and Fixing customized conference table of 7000x2000x450 mm & height 750 mm with 36mm thick Ply top with 1 mm thk

laminate finish with 2 mm edge bidding matching with laminate finish, with the provision of access flap for data and power and speaker

system connectivity on the top surface, mounted on the curved shaped gable end of 100mm thickness and 3/4th height apron

providing space for wire management within including all switches and sockets as per requirement of client. TABLETOP: - 36mm thick

curved edge tabletop made up of 18mm+18 mm thick Ply with the batten of the same thickness and finish fitted all over the edges with

decorative "D" headed aluminum profile fixed between joint of top and batten panel to avoid by forced pill-off of PVC foil from edge-

side resulting in a rich

looking at 36mm solid free-flow structure for executive seating. Bottom support: - Curved shaped gable end or leg having a thickness Rupees Two Lakh Eighty

36 1 of 20 mm edges having a radius of 10mm as a resulting in an oval look. The gable end is made up of core structure and skin covering 280214.4 Thousand Two Hundred Nos.

the structure with end profile fixed on it. The wooden core structure is a rigid assembly of 50mm thick one central vertical load caring Fourteen Paise Fourty Only

member with two end support of same thickness of 25mm thick plywood. MODESTY: - Modesty Panel of lighter shade made up of

18mm thick plywood with 1 mm thick laminate providing stability to structure and allow sufficient leg privacy to the user. WIRE

MANAGEMENT: - Provision for wire passing throughout the structure without mixing data and power connections. The wires can be

pulled inside the table from floor and placed in the boxes build below openable shutter. The access point for data and power can be

mount on the main top as well as the openable top. Access flap is box structure made up of aluminum extrusion with necessary

switches and sockets and connectivity to different equipment. etc all complete with necessary hardware and complete as directed by

engineer in charge. all visible and non-visible surfaces to be cladded with 1 mm thick laminate as per detail design drawings.

Providing and Fixing coustmised conferece table of 8450x2700 & height 750 mm Set of table top, modesty and gable end designed in

handshake pattern to build the closed module, open module of Video conferencing pattern V-shaped configuration of the conference

table with infinite seating arrangement depending upon space available to set the conference table. TABLE TOP:- 36mm thick table

top made up of 18mm+18mm thick ply wood with 1 mm thick laminate with 12mm thick thin PVC foil wrapped decorative profile made

up of Ply wood fixed along all the edges from the bottom side which provide decorative waterfall edge profile to top with twin colour

look the decorative trim to be connected at the angle of 45 degrees with each other. Single seater small top of size size 1200mm width

and 600mm depth. Two-seater big top of size 1350mm width and 600mm depth can shape open type and O shape close type

Rupees Six Lakh Twelve

configuration. Two-seater end top of perfect semicircle shape of the radius of 600mm usable for the close module with the lowest

37 1 612969 Thousand Nine Hundred Nos.

space of 1200mm in front to front seating. LEG:- 25mm thick Leg or Gable End made up of 25mm thick Ply wood with 1 mm thick

laminate with MS leveller bracket to give floating look. MODESTY:- Modesty Panel made up of 18mm thick ply wood with 1 mm thick

laminate providing stability to structure and allow sufficient leg privacy to the user. "D" headed decorative aluminium profile fixed on it.

WIRE MANAGEMENT:- Provision for wire passing throughout the structure without mixing data and power connections. The wires can

be pulled inside the table from floor and placed in the boxes build below openable shutter. The access point for data and power can be

mount on the main top as well as the openable top. Access flap is box structure made up of aluminium extrusion with necessay

switches and sockets and connectivity to different equipments. etc all complete with necessary hardware and complete as directed by

engineer incharge. all visible and non visible surfaces to be claded with 1 mm thick laminate as per detail design drawings.

Estimated Rate With 1% Labour Cess

in Rs. (Excluding GST)

Quantity but Total Amount in

Quantity but Total Amount in

Item No. Description Unit

may be more or Rs.

In Figures In Words

Providing and Fixing coustmised conferece table of 4600x3500 & height 750 mm Set of table top, modesty and gable end designed in

handshake pattern to build the closed module, open module of Video conferencing pattern V-shaped configuration of the conference

table with infinite seating arrangement depending upon space available to set the conference table. TABLE TOP:- 36mm thick table

top made up of 18mm+18mm thick ply wood with 1 mm thick laminate with 12mm thick thin PVC foil wrapped decorative profile made

up of Ply wood fixed along all the edges from the bottom side which provide decorative waterfall edge profile to top with twin colour

look the decorative trim to be connected at the angle of 45 degrees with each other. LEG:- 25mm thick Leg or Gable End made up of

Rupees Three Lakh

25mm thick Ply wood with 1 mm thick laminate with MS leveller bracket to give floating look. MODESTY:- Modesty Panel made up of

38 1 394051.5 NinetyFour Thousand Nos.

18mm thick ply wood with 1 mm thick laminate providing stability to structure and allow sufficient leg privacy to the user. "D" headed

FiftyOne Paise Fifty Only

decorative aluminium profile fixed on it. WIRE MANAGEMENT:- Provision for wire passing throughout the structure without mixing

data and power connections. The wires can be pulled inside the table from floor and placed in the boxes build below openable shutter.

The access point for data and power can be mount on the main top as well as the openable top. Access flap is box structure made up

of aluminium extrusion with necessay switches and sockets and connectivity to different equipments. etc all complete with necessary

hardware and complete as directed by engineer incharge. all visible and non visible surfaces to be claded with 1 mm thick laminate as

per detail design drawings.

Providing and Fixing coustmised conferece table of 3000x1200x750 STRUCTURE:- Set of table top, modesty and gable end designed

in handshake pattern to build the closed module, open module of Video conferencing pattern V-shaped configuration of the

conference table with infinite seating arrangement depending upon space available to set the conference table. TABLE TOP:- 30mm

thick table top made up of 18mm thick ply wood with 1 mm thick laminate board with 12mm thick thin PVC foil wrapped decorative

profile made up of ply fixed along all the edges from the bottom side which provide decorative waterfall edge profile to top with twin

colour look the decorative trim to be connected at the angle of 45 degrees with each other. Single seater small top of size 675mm

width and 600mm depth. Two-seater big top of size 1350mm width and 600mm depth can shape open type and O shape close type

Rupees FiftyFive Thousand

configuration. Two-seater end top of perfect semicircle shape of the radius of 600mm usable for the close module with the lowest

39 1 55459.1 Four Hundred FiftyNine Paise Nos.

space of 1200mm in front to front seating. LEG:- 25mm thick Leg or Gable End made up of 25mm thick pre-laminated particle board

with MS leveller bracket to give floating look. MODESTY:- Modesty Panel made up of 18mm thick ply wood with 1 mm thick laminate

providing stability to structure and allow sufficient leg privacy to the user. "D" headed decorative aluminium profile fixed on it. WIRE

MANAGEMENT:- Provision for wire passing throughout the structure without mixing data and power connections. The wires can be

pulled inside the table from floor and placed in the boxes build below openable shutter. The access point for data and power can be

mount on the main top as well as the openable top. Access flap is box structure made up of aluminium extrusion with necessay

switches and sockets and connectivity to different equipments. etc all complete with necessary hardware and complete as directed by

engineer incharge. all visible and non visible surfaces to be claded with 1 mm thick laminate as per detail design drawings.

Estimated Rate With 1% Labour Cess

in Rs. (Excluding GST)

Quantity but Total Amount in

Quantity but Total Amount in

Item No. Description Unit

may be more or Rs.

In Figures In Words

Providing and Fixing coustmised conferece table of 9100x2400 & height 750 mm Set of table top, modesty and gable end designed in

handshake pattern to build the closed module, open module of Video conferencing pattern V-shaped configuration of the conference

table with infinite seating arrangement depending upon space available to set the conference table. TABLE TOP:- 36mm thick table

top made up of 18mm+18mm thick ply wood with 1 mm thick laminate with 12mm thick thin PVC foil wrapped decorative profile made

up of Ply wood fixed along all the edges from the bottom side which provide decorative waterfall edge profile to top with twin colour

look the decorative trim to be connected at the angle of 45 degrees with each other. Single seater small top of size size 1200mm width

and 600mm depth. Two-seater big top of size 1350mm width and 600mm depth can shape open type and O shape close type

Rupees Four Lakh FiftyEight

configuration. Two-seater end top of perfect semicircle shape of the radius of 600mm usable for the close module with the lowest

40 1 458439 Thousand Four Hundred Nos.

space of 1200mm in front to front seating. LEG:- 25mm thick Leg or Gable End made up of 25mm thick Ply wood with 1 mm thick

ThirtyNine Only

laminate with MS leveller bracket to give floating look. MODESTY:- Modesty Panel made up of 18mm thick ply wood with 1 mm thick

laminate providing stability to structure and allow sufficient leg privacy to the user. "D" headed decorative aluminium profile fixed on it.

WIRE MANAGEMENT:- Provision for wire passing throughout the structure without mixing data and power connections. The wires can

be pulled inside the table from floor and placed in the boxes build below openable shutter. The access point for data and power can be

mount on the main top as well as the openable top. Access flap is box structure made up of aluminium extrusion with necessay

switches and sockets and connectivity to different equipments. etc all complete with necessary hardware and complete as directed by

engineer incharge. all visible and non visible surfaces to be claded with 1 mm thick laminate as per detail design drawings.

The Reception Table Overall dimension 4000 mm x 15000 mm & height 750 mm shall be made of IS 710 Grade ply + `6-8 mm thick

corian( solid surface) finish as per the reference images. The unit shall have multiple utility accessories attached to the table file

storage + Pen pencil holder + bag hook etc. as per the reference image. STRUCTURE- The Reception Table shall be made of IS

Grade ply + combination of 1 mm thick Laminate and 6-8mm thick corian finish as per the reference image. Multiple Drawers shall be

made from IS 710 Grade ply as per the reference image. All external & internal surfaces shall be combination of 1 mm thick laminate

and 6-8mm thick corian finish of approved make and shade by architect & EIC The top bend & side of the unit shall be IS 710 Grade

ply + 1 mm thick Laminate as shown in reference image. Drawer all side shall be made of solid wood & Base of the drawer shall be

made of IS 710 Grade ply +1 mm thick Laminate finish. HARDWARE Hinges premium quality soft close Auto Hinges for openable Rupees Two Lakh Ten

41 2 shutters. Soft close Channel of premium quality for drawers 300 to 600mm silent with Catch or equivalent as approved by Architect & 210160.8 Thousand One Hundred Sixty Nos.

EIC. one lock per active drawer / Shutter of approved make.Aluminium anodized profile handles as per the approved design and Paise Eighty Only

pattern. Magnet Catcher / Shutter Silent System/ Push to open system - of approved make. Cable organizer on top as per the

approved design and pattern.Provision for connectivity Multimedia to AV, Internet, laptop power, extra power, microphone in tabletop.

All wooden joinery and detailing shall be as per the reference images or approved design pattern. CABLE MANAGEMENT All power

outlets to be coordinated with Electrical drawings. All electric equipment requirements to be coordinated with Electrical drawing.Cable

management to be incorporated within the furniture to conceal all cables starting from floor to all desks. 2 power and 2 data outlets to

be provided per desk - to be checked in electrical drawing. FINISH corian and Laminate finish as per selection and approval of

architect and EIC. The design & finishes as per selection, direction and approval of Architect & EIC.

Estimated Rate With 1% Labour Cess

in Rs. (Excluding GST)

Quantity but Total Amount in

Quantity but Total Amount in

Item No. Description Unit

may be more or Rs.

In Figures In Words

Providing and fixing customized conference table with veneer finish of 4600x3500 & height 750 mm Set of table top, modesty and

gable end designed in handshake pattern to build the closed module, open module of Video conferencing pattern V-shaped

configuration of the conference table with infinite seating arrangement depending upon space available to set the conference table.

TABLE TOP:- 36mm thick table top made up of 18mm+18mm thick ply wood with 6 to 8 mm thick veneer with PU polish finish with

12mm thick thin PVC foil wrapped decorative profile made up of Ply wood fixed along all the edges from the bottom side which provide

decorative waterfall edge profile to top with twin color look the decorative trim to be connected at the angle of 45 degrees with each

Rupees Three Lakh

other. LEG:- 25mm thick Leg or Gable End made up of 25mm thick Plywood with 6 to 8 mm thick veneer with PU polish with MS

42 1 394051.5 NinetyFour Thousand Nos.

leveler bracket to give floating look. MODESTY: - Modesty Panel made up of 18mm thick ply wood with 6 to 8 mm thick veneer with

FiftyOne Paise Fifty Only

PU polish providing stability to structure and allow sufficient leg privacy to the user. "D" headed decorative aluminum profile fixed on it.

WIRE MANAGEMENT: - Provision for wire passing throughout the structure without mixing data and power connections. The wires

can be pulled inside the table from floor and placed in the boxes build below openable shutter. The access point for data and power

can be mount on the main top as well as the openable top. Access flap is box structure made up of aluminum extrusion with necessary

switches and sockets and connectivity to different equipment. etc. all complete with necessary hardware and complete as directed by

engineer in charge. all visible and non-visible surfaces to be cladded with 1 mm thick laminate as per detail design drawings.

Providing and Fixing coustmised conferece table with vineer finish of 5500 x 4500 & height 750 mm U-shaped configuration of the

conference table with infinite seating arrangement depending upon space available to set the conference table. TABLE TOP:- 36mm

thick table top made up of 18mm+18mm thick mdf with 6mm thick corian finish with edges and top area provide decorative waterfall

edge profile to top , Leg 36mm and modesty 24mm thick thick with vineer with PU polish finish to providing stability to structure and Rupees Three Lakh

43 1 allow sufficient leg privacy to the user. "D" headed decorative aluminium profile fixed on it. WIRE MANAGEMENT:- Provision for wire 394051.5 NinetyFour Thousand Nos.

passing throughout the structure without mixing data and power connections. The wires can be pulled inside the table from floor and FiftyOne Paise Fifty Only

placed in the boxes build below openable shutter. The access point for data and power can be mount on the main top as well as the

openable top. Access flap is box structure made up of aluminium extrusion with necessay switches and sockets and connectivity to

different equipments. etc all complete with necessary hardware and complete as directed by engineer incharge.

Providing and Fixing coustmised conferece table with vineer finish of 13300 x 3100 & height 750 mm U-shaped configuration of the

conference table with infinite seating arrangement depending upon space available to set the conference table. TABLE TOP:- 36mm

thick table top made up of 18mm+18mm thick mdf with 6mm thick corian finish with edges and top area provide decorative waterfall

edge profile to top , Leg 36mm and modesty 24mm thick thick with vineer with PU polish finish to providing stability to structure and Rupees Seven Lakh Seventy

44 1 allow sufficient leg privacy to the user. "D" headed decorative aluminium profile fixed on it. WIRE MANAGEMENT:- Provision for wire 770589.6 Thousand Five Hundred Nos.

passing throughout the structure without mixing data and power connections. The wires can be pulled inside the table from floor and EightyNine Paise Sixty Only

placed in the boxes build below openable shutter. The access point for data and power can be mount on the main top as well as the

openable top. Access flap is box structure made up of aluminium extrusion with necessay switches and sockets and connectivity to

different equipments. etc all complete with necessary hardware and complete as directed by engineer incharge.

CONFERENCE SCREEN MOUNTING TABLE -1050 X450x750 Providing and supply Conference screen Table - Complete in 24mm

thick thick with vineer with PU polish finish to providing stability to structure. WIRE MANAGEMENT:- Provision for wire passing

Rupees ThirtyTwo Thousand

throughout the structure without mixing data and power connections. The wires can be pulled inside the table from floor and placed in

45 2 32691.68 Six Hundred NinetyOne Paise Nos.

the boxes build below openable shutter. The access point for data and power can be mount on the main top as well as the openable

SixtyEight Only

top. Access flap is box structure made up of aluminium extrusion with necessay switches and sockets and connectivity to different

equipments. etc all complete with necessary hardware and complete as directed by engineer incharge.

Estimated Rate With 1% Labour Cess

in Rs. (Excluding GST)

Quantity but Total Amount in

Quantity but Total Amount in

Item No. Description Unit

may be more or Rs.

In Figures In Words

CONFERENCE SCREEN MOUNTING TABLE -1000 X450x750 Providing and supply Conference screen Table - Complete in 24mm

thick thick with vineer with PU polish finish to providing stability to structure. WIRE MANAGEMENT:- Provision for wire passing

Rupees ThirtyTwo Thousand

throughout the structure without mixing data and power connections. The wires can be pulled inside the table from floor and placed in

46 2 32691.68 Six Hundred NinetyOne Paise Nos.

the boxes build below openable shutter. The access point for data and power can be mount on the main top as well as the openable

SixtyEight Only

top. Access flap is box structure made up of aluminium extrusion with necessay switches and sockets and connectivity to different

equipments. etc all complete with necessary hardware and complete as directed by engineer incharge.

Providing And Supply High Back Rev. Chair Upholstered With Leatherette Seat Made Up Of 12mm +/- 1mm Thick Hot Pressed Mr

Grad Plywood And Back In Two Pieces - 12mm Rear Back And 6mm Inner Back. Moulded Polyurethane Foam Used In Making Seat

With Moulded Density 45+/- 2 Kg/M ³. Back Is Made Out Of 32 Density Block Foam Covered With 14mm Thick 32 Density Foam

Sheet (Block Foam).Spine Bracket Made Of M.S Plate 8mm Thickness Connecting Back With Mechanism. Armrest Top Is Soft Touch

Polyurethane Moulded Of 250 To 300 Density Insert In Stainless Steel Pipe Having Unique " Y "Shape. The Mechanism Of The Chair

Have Following Features: 360⁰ Revolving Type 3.5Mm Thk Crca Seat Plate With 4Mm Thk Crca Channel Plate Synchro

Rupees Fourteen Thousand

Mechanism, Tilt Tension Adjustable, Single Position Locking , Plastic Component Inside The Mechanism Of Grade - Mi 3530 And

47 2 14769.63 Seven Hundred SixtyNine Nos.

Epoxy Powder Coated 70 Microns With Tested 1.2 Lacs Cycles As Per Bifma Standard.The Chair Provided With Pneumatic Height

Paise SixtyThree Only

Adjustment Which Have Have Stroke Of 100mm +/- 5mm.The Five Leg Base Is Made Up Of 38Mm Dia X 1.2Mm Thick Tubular With

3.15mm Thick Centre Hub Crc Fabricated Chrome Finish. It Have Be Fitted With 50mm Dia Twin Wheel Castor . The Size Of The

Base Have Be - 660 +/- 1mm Pitch-Centre-Diameter. Load Test As Per Bifma Compliance.The Twin Wheel Castors Made Of Nylon

Injection Moulded In Black Colour.Overall Dimensions Of Chair Have Be, Width Of Chair - 640mm, Depth Of Chair 640mm As

Measured From Base Below. Height Of Back From Ground - Min 1175 To Max 1275mm. Seat Height -Min 480mm To Max 580mm.

Dimensions Tolerance / Variations Have Be Within +/- 10mm.

Providing And Supply Med. Back Rev. Chair - Upholstered With Leatherette Seat Have Be Made Up Of 12mm +/- 1mm Thick Hot

Pressed Mr Grad Plywood And Back In Two Pieces - 12mm Inner Back And 6mm Rear Back. Moulded Polyurethane Foam Used In

Making Seat With Moulded Density 45+/- 2 Kg/M ³. Back Is Made Out Of 32 Density Block Foam Covered With 14mm Thick

Density Foam .Spine Bracket Should Be Made Of M.S Plate 8mm Thickness Connecting Back With Mechanism. Armrest Top Is Soft

Touch Polyurethane Moulded Of 250 To 300 Density Insert In Stainless Steel Pipe Having Unique "Y"Shape. The Mechanism Of The

Chair Have Have Following Features: 360⁰ Revolving Type ,Seat Plate Crca 3.15mm Thick & Channel Plate - 4mm Thick Crca

Rupees Thirteen Thousand

Synchro Mechanism, Tilt Tension Adjustment, Multi Position Locking . Plastic Component Inside The Mechanism Of Grade - Mi

48 100 13893.96 Eight Hundred NinetyThree Nos.

And Epoxy Powder Coated 70 Microns With Tested 1.2 Lacs Cycles As Per Bifma Standard The Chair Have Be Provided With

Paise NinetySix Only

Pneumatic Height Adjustment Which Have Have Stroke Of 100 +/- 5mm The Base Have Be Made Of Tubular Crc Fabricated Chrome

Finish. It Have Be Fitted With 5 Nos. Twin Wheel Castor – 50mm Diameter. The Size Of The Base Have Be - 640 +/- 1mm Pitch-Centre-

Diameter. Load Test As Per Bifma Compliance.The Twin Wheel Castors Have Be Made Of Nylon Injection Moulded In Black

Colour.Overall Dimensions Of Chair Have Be, Width Of Chair - 665mm, Depth Of Chair 665mm As Measured From Base Below.

Height Of Back From Ground - Min 1140 To Max 1240mm. Seat Height -Min 475mm To Max 575mm. Dimensions Tolerance /

Variations Have Be Within +/- 10mm.

Estimated Rate With 1% Labour Cess

in Rs. (Excluding GST)

Quantity but Total Amount in

Quantity but Total Amount in

Item No. Description Unit

may be more or Rs.

In Figures In Words

Providing And Supply Med. Back Rev. Chair Upholstered With Leatherette Seat Made Up Of 12mm +/- 1mm Thick Hot Pressed Mr

Grad Plywood And Back In Two Pieces - 12mm Rear Back And 6mm Inner Back. Moulded Polyurethane Foam Used In Making Seat

With Moulded Density 45+/- 2 Kg/M ³. Back Is Made Out Of 32 Density Block Foam Covered With 14mm Thick 32 Density Foam

Sheet (Block Foam).Spine Bracket Made Of M.S Plate 8mm Thickness Connecting Back With Mechanism. Armrest Top Is Soft Touch

Polyurethane Moulded Of 250 To 300 Density Insert In Stainless Steel Pipe Having Unique " Y "Shape. The Mechanism Of The Chair

Have Following Features: 360⁰ Revolving Type 3.5Mm Thk Crca Seat Plate With 4Mm Thk Crca Channel Plate Synchro

Rupees Thirteen Thousand

Mechanism, Tilt Tension Adjustable, Single Position Locking , Plastic Component Inside The Mechanism Of Grade - Mi 3530 And

49 48 13893.96 Eight Hundred NinetyThree Nos.

Epoxy Powder Coated 70 Microns With Tested 1.2 Lacs Cycles As Per Bifma Standard The Chair Provided With Pneumatic Height

Paise NinetySix Only

Adjustment Which Have Have Stroke Of 100mm +/- 5mm.The Five Leg Base Is Made Up Of 38Mm Dia X 1.2Mm Thick Tubular With

3.15mm Thick Centre Hub Crc Fabricated Chrome Finish. It Have Be Fitted With 50mm Dia Twin Wheel Castor . The Size Of The

Base Have Be - 660 +/- 1mm Pitch-Centre-Diameter. Load Test As Per Bifma Compliance.The Twin Wheel Castors Have Be Made Of

Nylon Injection Moulded In Black Colour.Overall Dimensions Of Chair Have Be, Width Of Chair - 630mm, Depth Of Chair 630mm As

Measured From Base Below. Height Of Back From Ground - Min 950 To Max 1050mm. Seat Height -Min 470mm To Max 570mm.

Dimensions Tolerance / Variations Have Be Within +/- 10mm.

Providing And Supply Med. Back Upholstered With Leatherette Seat Made Up Of 12mm +/- 1mm Thick Hot Pressed Mr Grad Plywood

And Back In Two Pieces - 12mm Inner Back And 6mm In Rear Back. Moulded Polyurethane Foam Used In Making Seat With Moulded

Density 45+/- 2 Kg/M³. Back Is Made Out Of 32 Density Block Foam Covered With 14mm Thick 32 Density Foam Sheet (Block Foam).

Spine Bracket Made Of M.S Plate 8mm Thickness Connecting Back .Armrest Top Is Soft Touch Upholstered With Leatherette Rupees Twelve Thousand

50 6 Mounted On To An Injection Moulded Fix Type Armrest Which Is Mounted On The Aluminum Pressure Die Casted (Pdc) Bracket With 12259.38 Two Hundred FiftyNine Paise Nos.

Powder Coated Finish And Fixed With Powder Coated Twin Pipe Fittings. Pipe structure of MS CRCA finish 16 gauge round pipe ThirtyEight Only

having a diameter of 25 mm with epoxy powder coated . Overall Dimensions Of Chair Have Be, Width Of Chair - 640mm, Depth Of

Chair 640mm As Measured From Base Below. Height Of Back From Ground - Min 1035mm To Max 1135mm. Seat Height -Min

470mm To Max 570mm. Dimensions Tolerance / Variations Have Be Within +/- 10mm.

Providing And Supply Med. Back Rev. Chair Upholstered With Leatherette Seat Made Up Of 12mm +/- 1mm Thick Hot Pressed Mr

Grad Plywood And Back In Two Pieces - 12mm Rear Back And 6mm Inner Back. Moulded Polyurethane Foam Used In Making Seat

With Moulded Density 45+/- 2 Kg/M ³. Back Is Made Out Of 32 Density Block Foam Covered With 14mm Thick 32 Density Foam

Rupees Ten Thousand Four

Sheet (Block Foam). Armrest Top Is Soft Touch Polyurethane Moulded Of 250 To 300 Density Insert In Chrome Finish Pipe Having

51 46 10449.66 Hundred FourtyNine Paise Nos.

Unique "Bird Beak"Shape.. Pipe structure of MS CRCA finish 16 gauge round pipe having a diameter of 25 mm with epoxy powder

coated. Overall Dimensions Of Chair Have Be, Width Of Chair - 630mm, Depth Of Chair 630mm As Measured From Base Below.

Height Of Back From Ground - Min 950 To Max 1050mm. Seat Height -Min 470mm To Max 570mm. Dimensions Tolerance /

Variations Have Be Within +/- 10mm.

Providing and supply The visitor fix chair pipe structure of MS CRCA finish 16 gauge round pipe having a diameter of 32 mm, the

cantilever tubular structure with stability for proper balance, the seat and back is supported on spring structure, the backrest armrest Rupees Five Thousand Three

52 10 and seat dimensioned and curved from an ergonomics point of view, the frame and spring-seat structure prepared from MIG welding 5312.4 Hundred Twelve Paise Fourty Nos.

process & powder coated. Product is tested as per stringent BIFMA standards of performance. The Armerest of one-piece arm rest Only

are fitted to the seat are injection moulded black copolymemer.

Estimated Rate With 1% Labour Cess

in Rs. (Excluding GST)

Quantity but Total Amount in

Quantity but Total Amount in

Item No. Description Unit

may be more or Rs.

In Figures In Words

Providing and supply Seat and back in single piece with integrated arms like bucket shape, nylon moulded of 450 to 500 density fix

inner and outer snap fit arrangement in back with mesh fabric inside on equal interval of rectangular slots design. The mechanism of

the chair have have following features : 360⁰ revolving type, 2.5mm thk CRCA powder coated center tilt Mechanism, Tilt tension

Rupees Seven Thousand

adjustment, locking in single position, Plastic component inside the mechanism of Grade - MI 3530 and Epoxy Powder coated

53 523 7881.03 Eight Hundred EightyOne Nos.

Microns with tested 1.2 lacs cycles as per BIFMA Standard The chair have be provided with pneumatic height adjustment which have

Paise Three Only

have stroke of 100 +/- 5 mm. The Base have be made of injection moulded nylon. It have be fitted with 5 nos. twin wheel castor -

mm diameter. The size of the base be 660 +/- 1 mm pitch-centre-diameter. The twin wheel castors have be made of Nylon injection

moulded in black colour.

Providing and supply SS Pipe Dia 1 Inch Round, Thichness 16 Guage, PP Shell Made Of Virgin Polypropylene + Co-Polymer. Rupees Two Thousand Eight

54 88 Recyclable - Nylon Shoes At Frame Bottom, Stackable. 2860.52 Hundred Sixty Paise FiftyTwo Nos.

COLORS : RED,GREEN,ORANGE,WHITE,BLACK & GREY. Only

Providing and supply PREMIUM EXECUTIVE REVOLVING CHAIR (High Back) - Upholstered with Leatherette seat have be made up

of 12 mm +/- 1 mm thick hot pressed Mr grad plywood seat and back in two Pieces - 6 mm outer Back and 14 mm inner Back.

Moulded polyurethane foam with Fire Retardant Grade - ( FR ) used in making seat have be moulded with density 45+/- 2 kg/m³. Back

have be Upholstered with density 32+/- 2 kg/m³ super soft block foam & fillling with polyurethane fiber. Spine bracket should be made

of M.S plate 8 mm Thickness connecting back with mechanism. Armrest top is soft touch upholstered with polyurathine pad mounted Rupees TwentyEight

on Stainless steel tobuler mirror finish arm bracket. The mechanism of the chair have have following features : 360⁰ revolving type, Thousand Eight Hundred

synchronous Multi position . Mechanism, Tilt tension adjustment, 3 - position locking with Anti-Shock feature. The chair have be NinetySeven Paise Eleven

provided with pneumatic height adjustment which have have stroke of 90 +/- 5 mm. The five leg base have be made of Aluminum Only

Pressure Die Casted mirror finish. It have be fitted with - 60 mm Diameter twin wheel castor. The size of the base have be - 660+/-

mm pitch-centre-diameter. The twin wheel castors have be made of Nylon injection moulded in black colour. Overall dimensions of

Chair have be, Width of Chair - 710 mm, Depth of chair 760 mm as measured from base below. Height of back from ground - min

1200 mm to max 1290 mm. Seat height -min 430 mm to max 520 mm. Dimensions tolerance / variations have be within +/- 10 mm.

Providing and supply PREMIUM EXECUTIVE REVOLVING CHAIR (Medium Back) -Upholstered with Leatherette seat have be made

up of 12 mm +/- 1 mm thick hot pressed Mr grad plywood seat and back in two Pieces - 6 mm outer Back and 14 mm inner Back.

Moulded polyurethane foam with Fire Retardant Grade - ( FR ) used in making seat have be moulded with density 45+/- 2 kg/m³. Back

have be Upholstered with density 32+/- 2 kg/m ³ super soft block foam & fillling with polyurethane fiber. Spine bracket should be made

of M.S plate 8 mm Thickness connecting back with mechanism. Armrest top is soft touch upholstered with polyurathine pad mounted

Rupees TwentySix Thousand

on Stanless steel tobuler mirror finis arm bracket. The mechanism of the chair have following features : 360⁰ revolving type,

56 1 26853.88 Eight Hundred FiftyThree Nos.

synchronous Multi position Mechanism, Tilt tension adjustment, 3 - position locking with Anti-Shock feature. The chair have be

Paise EightyEight Only

provided with pneumatic height adjustment which have have stroke of 90 +/- 5 mm. The five leg base have be made of Aluminum

Pressure Die Casted mirror finish. It have be fitted with- 60 mm Diameter twin wheel castor. The size of the base have be - 660+/-

mm pitch-centre-diameter. The twin wheel castors have be made of Nylon injection moulded in black colour. Overall dimensions of

Chair have be, Width of Chair - 640 mm, Depth of chair 640 mm as measured from base below. Height of back from ground - min

mm to max 1070 mm. Seat height -min 460 mm to max 560 mm. Dimensions tolerance / variations have be within +/- 10 mm.

Estimated Rate With 1% Labour Cess

in Rs. (Excluding GST)

Quantity but Total Amount in

Quantity but Total Amount in

Item No. Description Unit

may be more or Rs.

In Figures In Words

Providing and supply PREMIUM EXECUTIVE REVOLVING CHAIR (High Back) - Upholstered with Leatherette, Mr grad plywood

bucket type shell in two Pieces - 14 mm outer shell and 6 mm Inner shell. Moulded polyurethane foam with Fire Retardant Grade - (

FR ) used in making seat which have be moulded with density 45+/- 2 kg/m³. Back have be Upholstered with density 60+/- 2 kg/m³

super soft block foam & fillling with polyurethane fiber. Torsion bar mechanism fix with seat. Armrest top is Wooden melamine finish

pad fix on the Aluminum Pressure Die Casted ( PDC ) mirror finish bracket fix with seat and back. The chair have be provided with Rupees FourtyNine Thousand

57 1 pneumatic height adjustment which have have stroke of 90 +/- 5 mm. The five leg base have be made of Aluminum Pressure Die 49621.3 Six Hundred TwentyOne Nos.

Casted mirror finish and Veneer finish cladding with moulded nylon lower cover. it have be fitted with- 60 mm Diameter twin wheel Paise Thirty Only

castor. The size of the base have be - 660+/- 1 mm pitch-centre-diameter. The twin wheel castors have be made of Nylon injection

moulded in black colour. Overall dimensions of Chair have be, Width of Chair - 710 mm, Depth of Chair - 630 mm as measured from

base below. Height of back from ground - min 1150 mm to max 1240 mm. Seat height -min 500 mm to max 600 mm. Dimensions

tolerance / variations have be within +/- 10 mm.

Providing and supply Upholstered with Leatherette, Mr grad plywood bucket type shell in two Pieces - 14 mm outer shell and 6 mm

Inner shell. Moulded polyurethane foam with Fire Retardant Grade - (FR) used in making seat which have be moulded with density

45+/- 2 kg/m³. Back have be Upholstered with density 60+/- 2 kg/m³ super soft block foam & fillling with polyurethane fiber .pipe Rupees Nineteen Thousand

58 6 structure of MS CRCA finish 16 gauge round pipe having a diameter of 25 mm with epoxy powder coated . Chair have be, Width of 19264.74 Two Hundred SixtyFour Paise Nos.

Chair - 710 mm, Depth of Chair - 630 mm as measured from base below. Height of back from ground - min 990 mm to max 1080 mm. SeventyFour Only

Seat height -min 500 mm. Dimensions tolerance / variations have be within +/- 10 mm. Dimensions tolerance / variations have be

within +/- 10 mm.

Acoustic Chair to Auditorium:

Auditorium Ballet Chair With Pu Arms And Auto Tip Off Seat:

Providing and fixing of the seat frame assembly shall be ERW Tube / IS: 3074-2005 GRADE 1: 19mm dia. Round Pipe 1.2mm

thickness. The Seat profile shall be developed to help the users to get necessary comfort in popliteal region and ease of use in

forward push for the seat sliding feature. Seat size shall be: 54.8 cm. (W) x 52.0 cm (D) x 11.5 cm (T) (Front) & 8.5 cm (T) (Rear). The

backrest assembly shall be made of ERW Tube / IS :3074-2005 GRADE 1: 16mm dia. Round Pipe 1.2mm Thickness & Extra

Reinforcement 16 dia. round pipe 1.2 mm. The back foam shall be designed with contoured lumbar support for extra comfort at upright

and tilted conditions. The back shall be: 54.8 cm. (W) x 82 cm (H) x 11.0 cm (T) (Front) & 6cm (T) (Rear). The Automotive grade HR

polyurethane foam for Seat and Back shall be moulded with Density = 55 +/- 5kgs/cu.m. as per JIS K 6401 with compression max

13%. The back & seat covers are made of injection moulded thermoform PPCP as per IS: 10915-1984 with sizes as required. The

armrest shall be made up of Polyurethane with waterfall edge design. Also available with cup holder. For Push Back mechanism – Coil

Spring / Spring Steel IS: 4454 1981 GRADE 2. The Fluimatic slider travels upto 60mm with metal ball and roller cage which results in

PUSH BACK OF 140 + 10mm. Should have flexibility to restrict movement of the pushback and slider as per availability of aisle space. Rupees Ten Thousand Three

59 311 The mechanism houses the seat & back and shall has a special feature of upright resistance lock to avoid activation of sliding feature 10332.91 Hundred ThirtyTwo Paise Nos.

unless enough force shall be applied by user when tilting shall be required. For Auto Tip-up Seat – Torsion Spring / Spring Steel IS: NinetyOne Only

4454 1981 GRADE 2 (part i). The chair shall rests on the ground on two Side wing frame with plywood with upholstery. Each Leg is a

square tube of cross section 25mm X25mm x1.63mm Thickness as per IS:4923-1985 standards . The side panel frame is made of

HRPO sheet metal as per IS: 1079 -1994 standards. It shall be grouted to the floor using 2 nos. anchors for each panel through the

base plate. All steel components shall be zinc passivated and powder coated (DFT 40-60 microns). The heavy duty 100 % polyester

dyed yarn with 3mm + 0.5mm foam backing fabric is available in shades as per Wipro Box Office shade card. FR grade material

confirms to IS 15061. The auditorium chair shall be designed to get mounted/grouted on floors with concrete (min 100 mm) or wooden

flooring (min 50 mm) with specific grouting bolts. Provision for lights on sides for seats along the aisles using PP housing with 12mm

watt lamp. Aluminum cut-outs available for row & seat numbering. Overall Dimensions shall be Seat Height - 44.5 cm, Height - 104 +/-

1 cm, Width & Depth as measured from base - Width-57.5 cm and Depth-52.0 cm. Dimensions tolerance / variations shall be within +/-

Test certificate and Samples. All makes and models of all items/samples should be approved by the Acoustic consultant prior to the

installation and OEM to submit 3rd party accredited lab test certificate for review and approval.

Estimated Rate With 1% Labour Cess

in Rs. (Excluding GST)

Quantity but Total Amount in

Quantity but Total Amount in

Item No. Description Unit

may be more or Rs.

In Figures In Words

Providing and supply PREMIUM EXECUTIVE REVOLVING CHAIR (Medium Back) -Upholstered with Leatherette, Mr grad plywood

bucket type shell in two Pieces - 14 mm outer shell and 6 mm Inner shell. Moulded polyurethane foam with Fire Retardant Grade -

(FR) used in making seat which have be moulded with density 45+/- 2 kg/m³. Back have be Upholstered with density 60+/- 2 kg/m³

super soft block foam & fillling with polyurethane fiber. Torsion bar mechanism fix with seat. Armrest top is Wooden melamine finish

Rupees TwentyThree

pad fix on the Aluminum Pressure Die Casted (PDC) mirror finish bracket fix with seat and back. The chair have be provided with

Thousand One Hundred

60 4 pneumatic height adjustment which have have stroke of 90 +/- 5 mm. The five leg base have be made of Aluminum Pressure Die 23117.69 Nos.

Seventeen Paise SixtyNine

Casted mirror finish and Veneer finish cladding with moulded nylon lower cover. it have be fitted with- 60 mm Diameter twin wheel

castor. The size of the base have be - 660+/- 1 mm pitch-centre-diameter. The twin wheel castors have be made of Nylon injection

moulded in black colour. Overall dimensions of Chair have be, Width of Chair - 710 mm, Depth of Chair - 630 mm as measured from

base below. Height of back from ground - min 990 mm to max 1080 mm. Seat height -min 500 mm to max 600 mm. Dimensions

tolerance / variations have be within +/- 10 mm.

Type: 3 Seater Sofa

Size (approx. Over all dimension): 2100mm(W) x 800mm(D) x 780mm (H) Top: Upholstery with Latherite Finish all visible surfaces

Specifications:Providing and supply Sofa sturcture made from 18mm MR Grade Mr grad plywood supported with Maranti Solid wood,

back side and curved part Covered with 3mm flexi ply, sofa arm made from 12mm thick MR Grade Mr grad plywood supported with

maranti solid wood. Elastic Belt, 75mm board & 2.25 mm thick elastic webbing stapling in seat frame at 100 mm centre to centre Rupees SixtyFour Thousand

61 3 distance, belt fastern in X and Y axies of seat, elastic belt elongation 45% tensile strength 350 kg. Foam 100 mm X 40 density 64215.8 Two Hundred Fifteen Paise Nos.

Premium Quality foam covered with 25mm X 32 density super soft Premium Quality Foam for soft touch filling in seat. 50 mm X 40 Eighty Only

density Premium Quality foam covered with 25mm X 32 density super soft Premium Quality foam for soft touch filling in back. Stiching

Stiching work done with well known german brand (Aman / Gutermann) Thread. Nylone & Polyster thread used as per application. Leg

made from Stainless steel 316 Grade. all material selection will be as per architect's selection, etc all complete with respect to

necessary hardware and finishes

Type: 2 Seater Sofa

Size (approx. Over all dimension): 1500mm(W) x 800mm(D) x 780mm (H) Top: Upholstery with Latherite Finish all visible surfaces

Specifications:Providing and supply Sofa sturcture made from 18mm MR Grade Mr grad plywood supported with Maranti Solid wood,

back side and curved part Covered with 3mm flexi ply, sofa arm made from 12mm thick MR Grade Mr grad plywood supported with

maranti solid wood. Elastic Belt, 75mm board & 2.25 mm thick elastic webbing stapling in seat frame at 100 mm centre to centre Rupees FourtyNine Thousand

62 2 distance, belt fastern in X and Y axies of seat, elastic belt elongation 45% tensile strength 350 kg. Foam 100 mm X 40 density 49621.3 Six Hundred TwentyOne Nos.

Premium Quality foam covered with 25mm X 32 density super soft Premium Quality Foam for soft touch filling in seat. 50 mm X 40 Paise Thirty Only

density Premium Quality foam covered with 25mm X 32 density super soft Premium Quality foam for soft touch filling in back. Stiching

Stiching work done with well known german brand (Aman / Gutermann) Thread. Nylone & Polyster thread used as per application. Leg

made from Stainless steel 316 Grade. all material selection will be as per architect's selection, etc all complete with respect to

necessary hardware and finishes

Estimated Rate With 1% Labour Cess

in Rs. (Excluding GST)

Quantity but Total Amount in

Quantity but Total Amount in

Item No. Description Unit

may be more or Rs.

In Figures In Words

Type: 1 Seater Sofa

Size (approx. Over all dimension): 900mm(W) x 800mm(D) x 780mm (H) Top: Upholstery with Latherite Finish all visible surfaces

Specifications:Providing and supply Sofa sturcture made from 18mm MR Grade Mr grad plywood supported with Maranti Solid wood,

back side and curved part Covered with 3mm flexi ply, sofa arm made from 12mm thick MR Grade Mr grad plywood supported with

maranti solid wood. Elastic Belt, 75mm board & 2.25 mm thick elastic webbing stapling in seat frame at 100 mm centre to centre Rupees ThirtyTwo Thousand

63 2 distance, belt fastern in X and Y axies of seat, elastic belt elongation 45% tensile strength 350 kg. Foam 100 mm X 40 density 32107.9 One Hundred Seven Paise Nos.

Premium Quality foam covered with 25mm X 32 density super soft Premium Quality Foam for soft touch filling in seat. 50 mm X 40 Ninety Only

density Premium Quality foam covered with 25mm X 32 density super soft Premium Quality foam for soft touch filling in back. Stiching

Stiching work done with well known german brand (Aman / Gutermann) Thread. Nylone & Polyster thread used as per application. Leg

made from Stainless steel 316 Grade. all material selection will be as per architect's selection, etc all complete with respect to

necessary hardware and finishes

3-SEATER SOFA - Providing and supply Sofa made from 18mm Oriented strand board supported with Maranti Solid wood, Handle

and curved part Covered with 3mm flexi ply.

Seat, Back & Handle

● Foam 50mm-40 Density Premium Quality Foam with 50mm-32 Density Super Soft premium Quality Foam with 35mm-32 Density

Super Soft premium Quality FoamFor Soft touch filling in seat. 25mm Recorn Fibre Inside Layer.

● Stuck pattern are placed in the Handle and seat front outside which looks good.

● Elastic Belt, 75mm board & 2.25 mm thick elastic webbing stapling in seat frame at 100 mm centre to centre distance, belt faster in X

and Y axises of seat, elastic belt elongation 45% tensile strength 350 kg.

● Foam 50mm-40 Density Premium Quality Foam with 35mm-32 Density Super Soft premium Quality Foam For Soft touch filling in

Rupees Seventy Thousand

64 4 Seat Back. With 25mm Recorn fibre Inside Layer. 70053.6 Nos.

FiftyThree Paise Sixty Only

● Foam 50mm-40 Density Premium Quality Foam With 11mm-40 Density Super Soft premium Quality Foam For Soft touch filling in

● Foam 11mm-40 Density Premium Quality Foam For Soft touch filling Outer periphery of sofa."

● Stiching work done with well known German brand Gutermann Thread.

● Nylone & Polyster thread used as per application. "

● Leg and Freame made from Stainless steel Rectangular bar 40mm x 10mm Thickness looking purpose Glossy Mirror Finish with

Polymer White Buffer.

Estimated Rate With 1% Labour Cess

in Rs. (Excluding GST)

Quantity but Total Amount in

Quantity but Total Amount in

Item No. Description Unit

may be more or Rs.

In Figures In Words

2-SEATER SOFA - Providing and supply Sofa made from 18mm Oriented strand board supported with Maranti Solid wood, Handle

and curved part Covered with 3mm flexi ply.

Seat, Back & Handle

"● Foam 50mm-40 Density Premium Quality Foam with 50mm-32 Density Super Soft premium Quality Foam with 35mm-32 Density

Super Soft premium Quality FoamFor Soft touch filling in seat. 25mm Recorn Fibre Inside Layer.

● Stuck pattern are placed in the Handle and seat front outside which looks good.

● Elastic Belt, 75mm board & 2.25 mm thick elastic webbing stapling in seat frame at 100 mm centre to centre distance, belt faster in X

and Y axises of seat, elastic belt elongation 45% tensile strength 350 kg.

Rupees ThirtySeven

● Foam 50mm-40 Density Premium Quality Foam with 35mm-32 Density Super Soft premium Quality Foam For Soft touch filling in

Thousand Nine Hundred

65 6 Seat Back. With 25mm Recorn fibre Inside Layer. 37945.7 Nos.

FourtyFive Paise Seventy

● Foam 50mm-40 Density Premium Quality Foam With 11mm-40 Density Super Soft premium Quality Foam For Soft touch filling in

● Foam 11mm-40 Density Premium Quality Foam For Soft touch filling Outer periphery of sofa."

"● Stiching work done with well known German brand Gutermann Thread.

● Nylone & Polyster thread used as per application. "

● Leg and Freame made from Stainless steel Rectangular bar 40mm x 10mm Thickness looking purpose Glossy Mirror Finish with

Polymer White Buffer.

3-SEATER SOFA - Providing and supply Sofa made from 18mm Oriented strand board supported with Maranti Solid wood.

Seat, Back & Handle

"● Foam 100mm-40 Density Premium Quality Foam with 32mm-32 Density Super Soft premium Quality Foam For Soft touch filling in

● Elastic Belt, 75mm board & 2.25 mm thick elastic webbing stapling in seat frame at 100 mm centre to centre distance, belt faster in X

and Y axises of seat, elastic belt elongation 45% tensile strength 350 kg.

● Foam 50mm-40 Density Premium Quality Foam with 25mm-32 Density Super Soft premium Quality Foam For Soft touch filling in

Rupees SixtyOne Thousand

66 2 61296.9 Two Hundred NinetySix Paise Nos.

● Foam 50mm-40 Density Premium Quality For Soft touch filling in Handle.

● Foam 11mm-40 Density Premium Quality Foam For Soft touch filling Outer periphery of sofa."

"● Stiching work done with well known German brand Gutermann Thread.

● Nylone & Polyster thread used as per application. "

● Leg made from Stainless steel Rectangular bar 40mm x 8mm Thickness looking purpose Glossy Mirror Finish with Polymer White

Estimated Rate With 1% Labour Cess

in Rs. (Excluding GST)

Quantity but Total Amount in

Quantity but Total Amount in

Item No. Description Unit

may be more or Rs.

In Figures In Words

1-SEATER SOFA - Providing and supply Sofa made from 18mm Oriented strand board supported with Maranti Solid wood.

Seat, Back & Handle

"● Foam 100mm-40 Density Premium Quality Foam with 32mm-32 Density Super Soft premium Quality Foam For Soft touch filling in

● Elastic Belt, 75mm board & 2.25 mm thick elastic webbing stapling in seat frame at 100 mm centre to centre distance, belt faster in X

and Y axises of seat, elastic belt elongation 45% tensile strength 350 kg.

● Foam 50mm-40 Density Premium Quality Foam with 25mm-32 Density Super Soft premium Quality Foam For Soft touch filling in Rupees ThirtySeven

Seat Back. Thousand Nine Hundred

● Foam 50mm-40 Density Premium Quality For Soft touch filling in Handle. FourtyFive Paise Seventy

● Foam 11mm-40 Density Premium Quality Foam For Soft touch filling Outer periphery of sofa." Only

"● Stiching work done with well known German brand Gutermann Thread.

● Nylone & Polyster thread used as per application. "

● Leg made from Stainless steel Rectangular bar 40mm x 8mm Thickness looking purpose Glossy Mirror Finish with Polymer White

3-SEATER SOFA - Providing and supply Sofa made from 18mm Oriented strand board supported with Maranti Solid wood, Handle

and curved part Covered with 3mm flexi ply.

Seat, Back & Handle

"● Foam 50mm-40 Density Premium Quality Foam with 50mm-32 Density Super Soft premium Quality Foam with 35mm-32 Density

Super Soft premium Quality FoamFor Soft touch filling in seat. With 25mm Recorn Fibre Inside Layer. ● Stuck pattern are

placed in the Handle outside which looks good.

● Elastic Belt, 75mm board & 2.25 mm thick elastic webbing stapling in seat frame at 100 mm centre to centre distance, belt faster in X

and Y axises of seat, elastic belt elongation 45% tensile strength 350 kg.

● Foam 50mm-40 Density Premium Quality Foam with 35mm-32 Density Super Soft premium Quality Foam For Soft touch filling in Rupees FourtyThree

68 4 Seat Back. With 25mm Recorn fibre Inside Layer. 43783.5 Thousand Seven Hundred Nos.

● Foam 50mm-40 Density Premium Quality Foam With 11mm-40 Density Super Soft premium Quality Foam For Soft touch filling in EightyThree Paise Fifty Only

● Foam 11mm-40 Density Premium Quality Foam For Soft touch filling Outer periphery of sofa."

"● Stiching work done with well known German brand Gutermann Thread.

● Nylone & Polyster thread used as per application. "

● Leg and Freame made from Stainless steel Rectangular bar 50mm x 10mm Thickness looking purpose Glossy Mirror Finish with

Polymer White Buffer.

Estimated Rate With 1% Labour Cess

in Rs. (Excluding GST)

Quantity but Total Amount in

Quantity but Total Amount in

Item No. Description Unit

may be more or Rs.

In Figures In Words

2-SEATER SOFA - Providing and supply Sofa made from 18mm Oriented strand board supported with Maranti Solid wood, Handle

and curved part Covered with 3mm flexi ply.

Seat, Back & Handle

"● Foam 50mm-40 Density Premium Quality Foam with 50mm-32 Density Super Soft premium Quality Foam with 35mm-32 Density

Super Soft premium Quality FoamFor Soft touch filling in seat. With 25mm Recorn Fibre Inside Layer. ● Stuck pattern are

placed in the Handle outside which looks good.

● Elastic Belt, 75mm board & 2.25 mm thick elastic webbing stapling in seat frame at 100 mm centre to centre distance, belt faster in X

and Y axises of seat, elastic belt elongation 45% tensile strength 350 kg.

● Foam 50mm-40 Density Premium Quality Foam with 35mm-32 Density Super Soft premium Quality Foam For Soft touch filling in Rupees TwentyNine

69 3 Seat Back. With 25mm Recorn fibre Inside Layer. 29189 Thousand One Hundred Nos.

● Foam 50mm-40 Density Premium Quality Foam With 11mm-40 Density Super Soft premium Quality Foam For Soft touch filling in EightyNine Only

● Foam 11mm-40 Density Premium Quality Foam For Soft touch filling Outer periphery of sofa."

"● Stiching work done with well known German brand Gutermann Thread.

● Nylone & Polyster thread used as per application. "

● Leg and Freame made from Stainless steel Rectangular bar 50mm x 10mm Thickness looking purpose Glossy Mirror Finish with

Polymer White Buffer.

1-SEATER SOFA - Providing and supply Sofa made from 18mm Oriented strand board supported with Maranti Solid wood, Handle

and curved part Covered with 3mm flexi ply.

Seat, Back & Handle

"● Foam 50mm-40 Density Premium Quality Foam with 50mm-32 Density Super Soft premium Quality Foam with 35mm-32 Density

Super Soft premium Quality FoamFor Soft touch filling in seat. With 25mm Recorn Fibre Inside Layer. ● Stuck pattern are

placed in the Handle outside which looks good.

● Elastic Belt, 75mm board & 2.25 mm thick elastic webbing stapling in seat frame at 100 mm centre to centre distance, belt faster in X

and Y axises of seat, elastic belt elongation 45% tensile strength 350 kg.

● Foam 50mm-40 Density Premium Quality Foam with 35mm-32 Density Super Soft premium Quality Foam For Soft touch filling in Rupees TwentySix Thousand

70 8 Seat Back. With 25mm Recorn fibre Inside Layer. 26270.1 Two Hundred Seventy Paise Nos.

● Foam 50mm-40 Density Premium Quality Foam With 11mm-40 Density Super Soft premium Quality Foam For Soft touch filling in Ten Only

● Foam 11mm-40 Density Premium Quality Foam For Soft touch filling Outer periphery of sofa."

"● Stiching work done with well known German brand Gutermann Thread.

● Nylone & Polyster thread used as per application. "

● Leg and Freame made from Stainless steel Rectangular bar 50mm x 10mm Thickness looking purpose Glossy Mirror Finish with

Polymer White Buffer.

Combination of Wood and Steel - 2400x400x2400 mm It is Rigid and Knockdown Construction, Material used for making shelfs and

skirting shall be of CRCA 1 mm thick and side panels and top pane are of 18mm ply with 1 mm thk laminate finish which gives better

stability and stylish appearance.The size can be increased as per requirement as this is add-on units’ type, it can be stacked width Rupees One Lakh FiftyFour

71 8 wise to form a bank of racks having common side panel. Number of adjustable shelves shall be four with 15 loading levels. Uniformly 154701.7 Thousand Seven Hundred Nos.

distributed load capacity per each shelf is 80 kg maximum. Shelf back stiffener at the rear end of the shelves shall be provided. These One Paise Seventy Only

are to support trophy or exhibit. It shall have a retractable tray for display purpose, the compartment behind the tray can be used for

storing. Label holder & range indicator on each main unit for inserting labels.

Estimated Rate With 1% Labour Cess

in Rs. (Excluding GST)

Quantity but Total Amount in

Quantity but Total Amount in

Item No. Description Unit

may be more or Rs.

In Figures In Words

Providing,supplying,arranging and fixing Laminated Pannel-Providing and fixing wooden panneling made of framing the

skeleton(plywood frame structure)with 18mm + 18mm thick MR grade plywood for vertical and horizontal plywood (patti) one side

cover with 6mm thick MR grade plywood for grooving as per design.Fixing properly without any air gap and finishing with seletced 4-6

MM mm thick Vneer finished with matt or glossy PU polis finish.Before installqation,make hole/face plate for conduit pipes of

eletcrical/networking cables with openable stud from partition Including Providing and fixing of 6mm thick tempered/toughened SGG

Rupees Six Thousand Nine

Colourmaxx Dura Lacquered glass of approved color by architect; glass to be installed with SGG Plain CLIP (made of polycarbonate,

72 10 6911.91 Hundred Eleven and Ninety Sqm

horizontal load carrying capacity of 30kg/100mm, vertical pullout load >200kg/100mm, using I/ J/J1 types only). Lacquered glass must

be made industrially manufactured and should conform to EN 16477; opaque (if viewed against a support wall), coated with PU

lacquer paints; color consistency (measured by Minolta spectrophotometer CM5081); highly durable (passes PERSOZ hardness test

for minimum 220 oscillatios); humid resistant (conforms to BS EN 1036 1999); environmentally friendly (no lead, no arsenic, no

copper, noformaldehyde); appropriate recycled content (12% post industrial / 6% post consumer); compressive strenght (1000 MPa) &

tensile strenght (40 MPa) all materials and labour etc.complete as per detail drawing and instruction of engineer-in charge.

Providing and fixing lockable cupboard of size 1500x450x2100 mm with 4 shelves two parts. Material – 0.7mm thick (+/-0.07mm)

CRCA for shelf; 0.8mm thick (+/-0.08mm) high yield strength CRCA for doors & back; 0.9mm thick (+/-0.08mm) CRCA for all other

Rupees TwentyEight

components. It should have 2 way locking mechanism with shooting bolt & rase s per req.handle or without handle.. It should have

73 168 28605.22 Thousand Six Hundred Five Nos.

height wise adjustable shelf With uniformly distributed load capacity per each full shelf 40kg maximum. Finish – Epoxy Powder Coated

Paise TwentyTwo Only

to the thickness of 50 microns (+/-10).etc complete with all necessary hardware. all handles to be consealed. no hinges to be visibal.

shade of powercoating will be as per architect's choice.

Providing and fixing lockable cupboard of size 1200x450x2100 mm with 4 shelves two parts. Material – 0.7mm thick (+/-0.07mm)

CRCA for shelf; 0.8mm thick (+/-0.08mm) high yield strength CRCA for doors & back; 0.9mm thick (+/-0.08mm) CRCA for all other Rupees TwentyTwo

components. It should have 2 way locking mechanism with shooting bolt & rase s per req.handle or without handle.. It should have Thousand Seven Hundred

height wise adjustable shelf With uniformly distributed load capacity per each full shelf 40kg maximum. Finish – Epoxy Powder Coated SixtySeven Paise FourtyTwo

to the thickness of 50 microns (+/-10).etc complete with all necessary hardware. all handles to be consealed. no hinges to be visibal. Only

shade of powercoating will be as per architect's choice.

Providing and fixing lockable cupboard of size 900X450X2100 mm with 4 shelves two parts. Material – 0.7mm thick (+/-0.07mm) CRCA

for shelf; 0.8mm thick (+/-0.08mm) high yield strength CRCA for doors & back; 0.9mm thick (+/-0.08mm) CRCA for all other

Rupees Sixteen Thousand

components. It should have 2 way locking mechanism with shooting bolt & rase s per req.handle or without handle.. It should have

75 31 16929.62 Nine Hundred TwentyNine Nos.

height wise adjustable shelf With uniformly distributed load capacity per each full shelf 40kg maximum. Finish – Epoxy Powder Coated

Paise SixtyTwo Only

to the thickness of 50 microns (+/-10).etc complete with all necessary hardware. all handles to be consealed. no hinges to be visibal.

shade of powercoating will be as per architect's choice.

Providing and fixing File Storage.1500X450X1200mm Top made of 25 mm thick PLY bothside covered 1 mm thick laminate finish

,sides 18 mm thick PLY bothside covered 1 mm thick laminate finish.9mm thk PLY bothside coberd with laminate finish.Skirting and

Rupees ThirtyTwo Thousand

Front Shutters made of 18 mm thick ply bothside covered 1 mm thick laminate finish with necessary hinges and lock. Shelves made of

76 107 32691.68 Six Hundred NinetyOne Paise Nos.

18 mm thick PLY bothside covered 1 mm thick laminate finish. Shutter hanging on Hinges, Lock and handle are consealted or profile

SixtyEight Only

or groove handle less etc.All edge 2mm thick Pvc beading matching with laminate will be provided.etc all necessary hardware

included and complete as per image and detail design and drawings. all laminate shade are to be as per architects's selection.

Providing and fixing File Storage.1200X450X1200mm Top made of 25 mm thick PLY bothside covered 1 mm thick laminate finish

,sides 18 mm thick PLY bothside covered 1 mm thick laminate finish.9mm thk PLY bothside coberd with laminate finish.Skirting and

Rupees TwentySix Thousand

Front Shutters made of 18 mm thick ply bothside covered 1 mm thick laminate finish with necessary hinges and lock. Shelves made of

77 10 26270.1 Two Hundred Seventy Paise Nos.

18 mm thick PLY bothside covered 1 mm thick laminate finish. Shutter hanging on Hinges, Lock and handle are consealted or profile

or groove handle less etc.All edge 2mm thick Pvc beading matching with laminate will be provided.etc all necessary hardware

included and complete as per image and detail design and drawings. all laminate shade are to be as per architects's selection.

Estimated Rate With 1% Labour Cess

in Rs. (Excluding GST)

Quantity but Total Amount in

Quantity but Total Amount in

Item No. Description Unit

may be more or Rs.

In Figures In Words

Providing and fixing File Storage.900x450x1200mm Top made of 25 mm thick PLY bothside covered 1 mm thick laminate finish ,sides

18 mm thick PLY bothside covered 1 mm thick laminate finish.9mm thk PLY bothside coberd with laminate finish.Skirting and Front

Rupees Twenty Thousand

Shutters made of 18 mm thick ply bothside covered 1 mm thick laminate finish with necessary hinges and lock. Shelves made of

78 3 20432.3 Four Hundred ThirtyTwo Nos.

mm thick PLY bothside covered 1 mm thick laminate finish. Shutter hanging on Hinges, Lock and handle are consealted or profile or

Paise Thirty Only

groove handle less etc.All edge 2mm thick Pvc beading matching with laminate will be provided.etc all necessary hardware included

and complete as per image and detail design and drawings. all laminate shade are to be as per architects's selection.

Providing and fixing File Storage.2800x450x1200mm Top made of 25 mm thick PLY bothside covered 1 mm thick laminate finish

,sides 18 mm thick PLY bothside covered 1 mm thick laminate finish.9mm thk PLY bothside coberd with laminate finish.Skirting and

Rupees SixtyFour Thousand

Front Shutters made of 18 mm thick ply bothside covered 1 mm thick laminate finish with necessary hinges and lock. Shelves made of

79 12 64215.8 Two Hundred Fifteen Paise Nos.

18 mm thick PLY bothside covered 1 mm thick laminate finish. Shutter hanging on Hinges, Lock and handle are consealted or profile

or groove handle less etc.All edge 2mm thick Pvc beading matching with laminate will be provided.etc all necessary hardware

included and complete as per image and detail design and drawings. all laminate shade are to be as per architects's selection.

Providing and fixing File Storage.1000x450x1200mm Top made of 25 mm thick PLY bothside covered 1 mm thick laminate finish

,sides 18 mm thick PLY bothside covered 1 mm thick laminate finish.9mm thk PLY bothside coberd with laminate finish.Skirting and

Rupees TwentyThree

Front Shutters made of 18 mm thick ply bothside covered 1 mm thick laminate finish with necessary hinges and lock. Shelves made of

80 2 23351.2 Thousand Three Hundred Nos.

18 mm thick PLY bothside covered 1 mm thick laminate finish. Shutter hanging on Hinges, Lock and handle are consealted or profile

FiftyOne Paise Twenty Only

or groove handle less etc.All edge 2mm thick Pvc beading matching with laminate will be provided.etc all necessary hardware

included and complete as per image and detail design and drawings. all laminate are to be as per architects's selection.

Providing and fixing File Storage.1200x450x750mm Top made of 25 mm thick PLY bothside covered 1 mm thick laminate finish ,sides

18 mm thick PLY bothside covered 1 mm thick laminate finish.9mm thk PLY bothside coberd with laminate finish.Skirting and Front Rupees TwentySeven

Shutters/drawer fascia made of 18 mm thick ply bothside covered 1 mm thick laminate finish with necessary hinges and lock. Shutter Thousand Seven Hundred

hanging on Hinges, Lock and handle are consealted or profile or groove handle less etc.All edge 2mm thick Pvc beading matching TwentyNine Paise FiftyFive

with laminate will be provided.etc all necessary hardware included and complete as per image and detail design and drawings. all Only

laminate are to be as per architects's selection.

Providing and fixing File Storage.1500x450x750 Top made of 25 mm thick PLY bothside covered 1 mm thick laminate finish ,sides

mm thick PLY bothside covered 1 mm thick laminate finish.9mm thk PLY bothside coberd with laminate finish.Skirting and Front Rupees TwentyTwo

Shutters/drawer fascia made of 18 mm thick ply bothside covered 1 mm thick laminate finish with necessary hinges and lock. Shutter Thousand One Hundred

hanging on Hinges, Lock and handle are consealted or profile or groove handle less etc.All edge 2mm thick Pvc beading matching EightyThree Paise SixtyFour

with laminate will be provided.etc all necessary hardware included and complete as per image and detail design and drawings. all Only

laminate shade are to be as per architects's selection.

Providing and fixing File Storage.2375x450x750mm Top made of 25 mm thick PLY bothside covered 1 mm thick laminate finish ,sides

18 mm thick PLY bothside covered 1 mm thick laminate finish.9mm thk PLY bothside coberd with laminate finish.Skirting and Front

Rupees FourtyNine Thousand

Shutters/drawer fascia made of 18 mm thick ply bothside covered 1 mm thick laminate finish with necessary hinges and lock. Shutter

83 4 49621.3 Six Hundred TwentyOne Nos.

hanging on Hinges, Lock and handle are consealted or profile or groove handle less etc.All edge 2mm thick Pvc beading matching

Paise Thirty Only

with laminate will be provided.etc all necessary hardware included and complete as per image and detail design and drawings. all

laminate shade are to be as per architects's selection.

Providing and fixing metal storage of 1350x600x2700 system with racks, having adjustable self with 6 shelf and storage unit. storage

Rupees FiftySix Thousand

unit to be made up of 3.15 mm thk section and 1.5mm thk shelf. having load carrying capacity of 400 to 500 kg per shelf. entire unit to

84 23 56743.42 Seven Hundred FourtyThree Nos.

be finished with 50-60 micron powder coating etc complete with necessary baseplate, anchor bolt, bracings channels and hardware as

Paise FourtyTwo Only

per selection of client or architect.

Estimated Rate With 1% Labour Cess

in Rs. (Excluding GST)

Quantity but Total Amount in

Quantity but Total Amount in

Item No. Description Unit

may be more or Rs.

In Figures In Words

Providing and fixing metal storage of 750x600x2700 system with racks, having adjustable self with 6 shelf and storage unit. storage

Rupees FourtyFour Thousand

unit to be made up of 3.15 mm thk section and 1.5mm thk shelf. having load carrying capacity of 400 to 500 kg per shelf. entire unit to

85 7 44133.77 One Hundred ThirtyThree Nos.

be finished with 50-60 micron powder coating etc complete with necessary baseplate, anchor bolt, bracings channels and hardware as

Paise SeventySeven Only

per selection of client or architect.

Dustbin - 240 ltr. SIZE :--595MX745 X 1010MM HT.Sintex Wheeled Dustbin,2 Rubber Wheels Capacity 240 L Color Green also Rupees Three Thousand Five

86 2 available in Blue Brand Sintex Structure Open Top Model Number GBRW-24-04 Height 1010 mm Number Of Wheels 2 Depth 745 3502.68 Hundred Two Paise SixtyEight Nos.

mm Width 595 mm, As per Drawing and Instruction of Architect/Engineer in charge. Only

Dustbin - 100 ltr. SIZE :--500MM DIA X 900MM HT.Plastic Sintex Dustbin, Capacity: 100 litre, Brand Sintex Structure Standing

Rupees Two Thousand Three

Material Plastic Design Half Moon (GBR 10-01)

87 3 2335.12 Hundred ThirtyFive Paise Nos.

COLOURS-Military green,darkblue,bright red,yellow and sticker as per requirement. As per Drawing and Instruction of

Architect/Engineer in charge.

Rupees Two Thousand

88 80 Providing and fixing MS powder coated dustbin as per client's selection and details. approximate size 250mmx400mm 2043.23 FourtyThree Paise Nos.

TwentyThree Only

Rupees TwentySix Thousand

Corian Finish ledge - Ledge boxing having 50mm or 75mm thick made of MDF with bottom laminated and exposed area and edges to

89 32.93 26270.1 Two Hundred Seventy Paise SQM

be clad with 6mm thcik corian surface of approved shade including all necessary hardware and fittings.

Providing,supplying,arranging and fixing Low Ht Partition Overall Height 1500mm (1200 mm wooden + 300mm glass) - MAIN FRAME-

Made out from 100% aluminum extruded profile sections with 60mm thickness. All surfaces to be provided with protective,

weatherproof and dustproof seal sections and pressure die casted end caps. All sections provided with duly powder coated finish of

ASSEMBLY- Entire system is panel based fitting and is provided with powder coated finish top brackets for table tops and connecting

Rupees Eleven Thousand

poles wherever necessary. Partitions provided with levellors for height adjustment.

90 209 11091.82 NinetyOne Paise EightyTwo SQM

DESIGN- Partition panel consists of SOFTBOARD alongwith bottom panel made out from 9mm thk. ply with laminate panels.

ELECTRICAL RACEWAY- Partition provided with DOUBLE electrical raceways of 110mm height made out from 100% aluminium

extruded profiles having necessary cutouts for switchplates and provided with powder coated finish. In each Cubicle there is table with

side unit having Top made of 25 mm thick Prelam MDF Board IS 303 with 2mm thick PVC edge bidding finish. Understructure made of

38mm square and 40x20 mm tubular pipe combination having 18 guage with powder coated finish with levellers and side unit having

sliding shutters with shelf included in it all in 18mm thick pre laminated particle board including all necessary hardware and fittings.

Acrylic work Top 500mm x 450mm. Providing and Arranging arylic work top with 10mm clear imported Acrylic sheet with two brass Rupees Seven Thousand Five

91 140 rods with height adjustable of overall size 580 mm x 400 mm etc complete as diretced by engineer incharge. As per Drawing and 7589.14 Hundred EightyNine Paise Nos.

Instruction of Architect/Engineer in charge. Fourteen Only

First Aid Box - Most elegant and economical first aid box available. Must for every residence, office or industrial establishment.

Powder coated aluminium uprights for strength. Pivoting drawers for easy accessibility o medicines. All drawers have two partitions to

Rupees Four Thousand Three

divide into 2 sections or 3 sections. Consists of 1 drawer of height 125mm. Keep bottles or sprays etc. Plus two drawers of height

92 10 4378.35 Hundred SeventyEight Paise Nos.

55mm. Keep tablet strips, ointments tubes, bandages etc. Lockable . Four holes provided in upright inside the box to fix on any wall

ThirtyFive Only

with four screws and rawal plugs included.Art No : AFAB-1 Size of Box : 302mm (W) x 320mm (H) x 110mm (D) As per Drawing and

Instruction of Architect/Engineer in charge.

Standard Acrylic Cover Key Cabinets size:-620 X 500mm Very convenient lockable key storage system. Metal hooks for hanging Rupees Nine Thousand Three

93 3 keys. Acrylic lockable cover. Different sizes for 20, 30, 40, 50 &100 keys. Numbered Key chains provided. Paper slip in key chains for 9340.48 Hundred Fourty Paise Nos.

writing.NO OF KEYS-50nos,Art no:-AKB 50 As per Drawing and Instruction of Architect/Engineer in charge. FourtyEight Only

Estimated Rate With 1% Labour Cess

in Rs. (Excluding GST)

Quantity but Total Amount in

Quantity but Total Amount in

Item No. Description Unit

may be more or Rs.

In Figures In Words

Providing Fixing and arrenging COMPACTOR:- Verticals:Vertical panel consists of the front, centre & rear panel will be made out of

20Swg.(1mm) thick C.R.C.A. Prime quality steel and designed to take the load of stiffeners in the centre along the height for additional

strength.Shelves: Boltless type shelves will made out of 20Swg (0.9mm). Thick C.R.C.A. quality steel having 8 folds in each to carry a

U.D.L. of 90 to 100 Kgs. Unit Partition: The centre partition will comprise of a full C.R.C.A. prime quality 24Swg.(0.6mm) to cover back

to back of double face units.Back Cover: The covering made out of C.R.C.A. prime quality wg.(0.8mm) panel type full back cover,

mounted on single face each cupboard.Super Structure: Super structure of the mobile storage system will be essentially collapsible or

knock down type. Each component of the mobile storage system such as shelves, front panel, end panel, vertical rear panel, Centre

partition etc, will act as an integral member of the Unit as a whole.Components: The mobile storage system components are designed

with the afety factors of 1 : 1.5 spectively.Raw Material: Prime tested material of IS 513 C.R.C.A. & IS 10748 H.R.C.A.Fasteners:- All

fasteners / notches provided shall be electro plated galvanized.Safety Features:- (A) Unit Stoppers: - Each mobile storage unit will be

provided with individual unit locking arrangement n built into the Hand-wheel/Triangle-Lever of the system.(B) Track Stoppers:- Each

system will be provided with stoppers on either ends of the rails to prevent the mobile storage unit from moving away off-Track.(C)

cenntral Lock: - Each system will be provided with central lock to enable locking of the entire system with one key.Indexing

rrangement:- Acrylic indexes (250x150x2.5mm thick) will be provided on each Front panel of the mobile storage system for easy

identification and retrieval.Anti Rust Treatment: All the items will be supplied duly powder coated in the manufacture work shop Marks

if any during the transportation will be touched up at site to match the surface. All the components will be given 4 stage 7 steps anti

corrosive treatment.Before carrying out powder coating pretreatment to steel surface will be carried out such as asing, pickling &

Phosphate. Degreasing will be carried out by using caustic soda, soda ash, Bi sodium phosphate & sulphuricmeta-silicate proper

concentration at closely controlled temperature. The component after degreasing will be rinsed in water Pickling will be carried out

subjecting the component to sulphuric acid solution for a specified time and washing them again hwater.Phosphating will be carried

out by subjecting the components to a treatment in phosphoric acid tank with sodium bitrate as accelator so that a fine coating is

94 achieved. The procedure contain in IS-6005 and IS-3618 will be adhere to.Pasivation is done by subjecting the mponent to dilute

chromic acid rinsing.Base Frame: Base frame will be fabricated in channel type from H.R.C.A. sheet to form a Channel of Size:

x100 x45mm.Guide Rails : The guide rails comprises of solid round bar of 30mm (Bright bar) press fit in to ‘U’ channel of 10G Prime

quality CRCA sheet The channels will have flanges on either side. This setup is then anchored to the floor by means of Expansion

bolts.Drive Mechanism: Drive Mechanism will be provided externally supported on special grade antication bearing to C134 have

smooth and effortless movement. Entire mechanism or gear and sprockets will be incorporated within the front panel provided in the

front of the Unit.(1) Each mobile storage system will have 4 or 6 Nos of Cast Iron wheels of size:35mm Each Wheel will be Provided

with a pair of self aligned heavy duty pedestal type bearings.(2) The drive Mechanism will comprise of sprocket chain type

arrangement.(3) The chain used will be ½” traction chain of ‘ Diamond’ or ‘Rollon’ make.(4) The mechanism will only be provided on

the external front side of the mobile storage system i.e. effective storage area inside the compactor will not be urbed. The entire drive

mechanism will be concealed from all side from the safety point of view.Anti Tilt & Anti Skew Arrangement:(Only for Single Face

Mobile Units) Each Single Face Mobile Unit will be Provided with Anti tilt & skew arrangement on the rear side of the unit. This will

prevent the ;unit from Toppling. Anti tilt arrangement is a very essential arrangement of The Mobile rageSystem, this are a pair of

bearings, suspended from the base unit moving in a Ground rail and guiding the unit while in motion.driving Wheel:- riving

Wheel/Triangle lever will comprise of a central hub resting on a pair of roller bearings with 3 insertable arms engaging into the hub.

The entire component will be stainless steel for better finish & longer life. The central hub will consist of the unit locking arrangement

for preventing the unit from moving when in use.Drive Cover Panel: Made out of 14Swg. Thick C.R.C.A. prime quality steel and Box

type to cover the entire drive mechanism completely. The drive cover panel will be of full height i.e. it will be of unit height.Final Finish:

Each component of the system shall be treated with rust preventive treatment and all the components will be Powder coated in

required shade from standard range & hidden components with enamel liquied paint to prevent rust from climatic onditions.Deviation:

Sizes & parameters of technical specifications tolerance 2.5% to 3.0% allowed. Deviation in design, quality, quantity will not be

Estimated Rate With 1% Labour Cess

in Rs. (Excluding GST)

Quantity but Total Amount in

Quantity but Total Amount in

Item No. Description Unit

may be more or Rs.

In Figures In Words

Rupees ThirtyNine Thousand

6 2 Bay Drive type : Single Face Stationary Unit - 2150 H x 1800 W (900x2) x 475 D (450+25) 39697.04 Six Hundred NinetySeven Nos.

Paise Four Only

Rupees NinetyNine Thousand

32 2 Bay Drive type : Double Face Mobile Unit - 2150 H x 1800 W (900x2) x 900 D (450+450) 99242.6 Two Hundred FourtyTwo Nos.

Paise Sixty Only

Rupees SeventyEight

6 2 Bay Drive type : Single Face Mobile Unit - 2150 H x 1800 W (900x2) x 475 D (450+25) 78810.3 Thousand Eight Hundred Ten Nos.

Paise Thirty Only

Rupees FiftyTwo Thousand

10 3 Bay Drive type : Single Face Stationary Unit - 2150 H x 2700 W (900x3) x 475 D (450+25) 52540.2 Five Hundred Fourty Paise Nos.

Rupees One Lakh TwentyFive

54 3 Bay Drive type : Double Face Mobile Unit - 2150 H x 2700 W (900x3) x 900 D (450+450) 125512.7 Thousand Five Hundred Nos.

Twelve Paise Seventy Only

Rupees NinetyThree

10 3 Bay Drive type : Single Face Mobile Unit - 2150 H x 2700 W (900x3) x 475 D (450+25) 93404.8 Thousand Four Hundred Four Nos.

Paise Eighty Only

Rupees SeventyTwo

4 4 Bay Drive type : Single Face Stationary Unit - 2150 H x 3600 W (900x4) x 475 D (450+25) 72972.5 Thousand Nine Hundred Nos.

SeventyTwo Paise Fifty Only

Rupees One Lakh FiftyFive

Thousand Two Hundred

22 4 Bay Drive type : Double Face Mobile Unit - 2150 H x 3600 W (900x4) x 900 D (450+450) 155285.48 Nos.

EightyFive Paise FourtyEight

Rupees One Lakh Nineteen

Thousand Six Hundred

4 4 Bay Drive type : Single Face Mobile Unit - 2150 H x 3600 W (900x4) x 475 D (450+25) 119674.9 Nos.

SeventyFour Paise Ninety

Rupees Three Thousand Six

82 4 Bay Drive type : Tracks of Comparaters (Rates/Mtr) 100x50x6mm with 20mm R Shaft (DIRECT ON FLOOR) 3619.44 Hundred Nineteen Paise Nos.

FourtyFour Only

Plywood cabinets with Laminate finsh,Cabinet and drawers as specified in drawing.

Type of shutter finish:1 mm thk LAMINATE Mr grade Plywood Carcass: Waterproof Plywood with Both side 1 mm thk Laminate with all

Rupees Fourteen Thousand

side edge banding & Knock down Technology. Tandem Drawer Systems, Cutlery tray, cup/ saucer attachment, thali attachment Note: -

95 70 14594.5 Five Hundred NinetyFour RMT

All visible sides of carcass & overhead cabinets will be covered with material matching the colour as those of the shutters Finish as

Paise Fifty Only

per selection and approval of architect & EIC. entire kitchen unit to be installed including all necessary hardware chenals drawers and

accesasory as per drawings and details.

Providing and fixing in position PVC Frosting Glass film of approved make (of any pattern, shade and type) on glass partitions and

Rupees Eight Hundred

doors for internal use. Film shall be pasted on glass without any appearing any air bubble. The rates shall be for all shapes and all

96 300 875.67 SeventyFive Paise SQM

heights with necessary scaffolding complete as per the Architectural drawings and manufacturer's specification & instructions as

SixtySeven Only

directed by the Architect and Engineer-in-charge. Film shall be with 10 years warranty.

Estimated Rate With 1% Labour Cess

in Rs. (Excluding GST)

Quantity but Total Amount in

Quantity but Total Amount in

Item No. Description Unit

may be more or Rs.

In Figures In Words

Providing and fixing wall acoustical paneling using ecotone PolySlatAcoustic Panel make Slatted L-27 of size 400 MM X 2400 MM X

21 MM thick with the specification:-Slatted L- 27mm @12mm, high grade Pine wood base Medium Density Fiber acoustic boards with

Tongue & Groove Edge, The acoustic should be furnished with a Marco polyester fiber acoustic panel backing with NRC: should be

Up to 0.90, should meet the safety requirements of EN 14190. Then fixing Rock wool of 50 kg density and 50 MM Thick Fixing: GI stud Rupees Eight Thousand Four

97 1311 of size 48 X 34 X 36 X 3660 fixed vertical to wall at every 600mm c/c and floor of size 50 X 32 X 0.5 X 3600 fixed Horizontally with the 8464.81 Hundred SixtyFour Paise SQM

help of noggin channel which is screw fixed directly to the wall where ever required with Clip approved by Architect and as specified EightyOne Only

including all accessories, material & labor complete as directed by Architect / Engineer – in – charge.(Ecotone by

Preksha/Ecorox/averox/Psquare)

Providing and fixing acoustical wall paneling with using ecotone or equivalent approved make ultra metal frame work to be fixed on

wall at every 600mm horizontally and 1200 mm vertically fixed with the help of Metal cleat by using IC-91 which is screw fixed directly

to the wall and fixing CS 55 on IC91 with help of clip/Screw and where ever required and using Knauf make insulation glass wool

between framing and panel with technical specification of 48 Kg/m3 and 50MM thick on above CS55 fixing SONIDO acoustic board of

size 1200 x 600 x 15mm fix on CS55 and then fixing 6MM thick ply wood of size 50MM than fixing vinyl grippers of ecotone make EG

Rupees Eight Thousand

15 Griper system using ,Tracks ( Perimeter Track , Half wrap, mid seam whatever is required) . Vinyl grippers must have base tapes

98 320 8756.7 Seven Hundred FiftySix Paise SQM

for better grip. Fixed in between Vinyl grippers and sonido board pasting ecotone synco PF of 10X10mm thick on the acoustical panel

by using adhesive as per specifications of manufacturer. Fabric Stretching Supplying and laying FR grade fabric stretch Clara Fabric

shade vide catalogue Name Brass/Atom is then cut into required size and shape and stretched, inserted inside the gripper by using

tools recommended by manufacturer, by Architect and as specified including all accessories, material & labour complete as directed

by Architect / Engineer – in – charge (Ecotone by Preksha/Ecorox/averox/Psquare)

Providing,supplying,arranging and fixing Laminated Pannel-Providing and fixing wooden panneling made of framing the

skeleton(plywood frame structure)with 18mm + 18mm thick MR grade plywood for vertical and horizontal plywood (patti) one side

Rupees Six Thousand Seven

cover with 6mm thick MR grade plywood for grooving as per design.Fixing properly without any air gap and finishing with seletced

99 153 6713.47 Hundred Thirteen Paise SQM

1.00 mm thick laminate.Before installqation,make hole/face plate for conduit pipes of eletcrical/networking cables with openable stud

FourtySeven Only

from partition Including all materials and labour etc.complete as per detail drawing and instruction of engineer-in charge.Wooden

Pelmat Laminate

Providing,supplying,arranging and fixing Laminated Pannel-Providing and fixing wooden panneling made of framing the

skeleton(plywood frame structure)with 18mm + 18mm thick MR grade plywood for vertical and horizontal plywood (patti) one side

Rupees Nine Thousand Six

cover with 6mm thick MR grade plywood for grooving as per design.Fixing properly without any air gap and finishing with seletced 4-6

100 278 9632.37 Hundred ThirtyTwo Paise SQM

MM mm thick Vneer finished with matt or glossy PU polis finish.Before installqation,make hole/face plate for conduit pipes of

ThirtySeven Only

eletcrical/networking cables with openable stud from partition Including all materials and labour etc.complete as per detail drawing and

instruction of engineer-in charge.

Provideing and fixing VINYL PRINT INFOGRAPHIC PANEL on Glass or on Wall or on Gypsum partition having desired print with

necessary size shape cutiing pasting of 3M IJ 180C with latex printing with 3M 8520 overlamainate with min 5 years warranty as Rupees Two Thousand Nine

101 455 directed by EIC and Architect. Cost to be include devloping high resolution graphics based on theme provided by client, printing, 2918.9 Hundred Eighteen Paise SQM

cutting,pasting and wastage as per site condition. Vendor to submit all shop drawings and graphics with architect for approval as per Ninety Only

actual site measurement before finalizing.

Providing and fixing of 6mm thick tempered/toughened SGG Colourmaxx Dura Lacquered glass of approved color by architect; glass

to be installed with SGG Plain CLIP (made of polycarbonate, horizontal load carrying capacity of 30kg/100mm, vertical pullout load

>200kg/100mm, using I/ J/J1 types only). Lacquered glass must be made industrially manufactured and should conform to EN 16477; Rupees Three Thousand

102 146 opaque (if viewed against a support wall), coated with PU lacquer paints; color consistency (measured by Minolta spectrophotometer 3794.57 Seven Hundred NinetyFour SQM

CM5081); highly durable (passes PERSOZ hardness test for minimum 220 oscillatios); humid resistant (conforms to BS EN 1036 Paise FiftySeven Only

1999); environmentally friendly (no lead, no arsenic, no copper, noformaldehyde); appropriate recycled content (12% post industrial /

6% post consumer); compressive strenght (1000 MPa) & tensile strenght (40 MPa)

Estimated Rate With 1% Labour Cess

in Rs. (Excluding GST)

Quantity but Total Amount in

Quantity but Total Amount in

Item No. Description Unit

may be more or Rs.

In Figures In Words

Providing and fixing wall soft board paneling with fabric wrapping using Fixing Ecotone make Marco polyester fiber acoustic wall

paneling with the specification of 12 MM thick Grooved having density of 1.90 kg/m2 with surface matt finish which is fixed with

Rupees Four Thousand Eight

solution SR505 as required. The panel should have euro class B ASTM E84- 13 fire rating. The color shade of Panel as approved by

103 36 4845.37 Hundred FourtyFive Paise SQM

Architect. Including border 50mm wide wooden border framing with PU polish all arpund the board and all accessories, material &

ThirtySeven Only

labor complete as directed by Engineer.

Providing and fixing notice board Framed in double sided curved Astra aluminum section, matt silver anodized. Direct easy fixing of Rupees Four Thousand Eight

104 5 board to the wall. Six different colours of wollen felt available. Use Push Pins, Map tacks ect. Push Pins available. Colours : Green, 4845.37 Hundred FourtyFive Paise SQM

Red, Blue, Grey, Maroon, Beige, size as per drawings and as per instruction of engineer incharge/architect ThirtySeven Only

Providing and fixing Slidding glass cover pin board with - Blue Colour Special plastic Foam. Easy to pin Notices Waterproof surface. Rupees Seven Thousand Five

105 5 Sliding Glass moves easily on Bearings. Lockable-keep messages visible & protected. Strong Aluminium frame 30mm X 50mm. Steel 7530.76 Hundred Thirty Paise SQM

corners provided at the back to hang on the wall. size as per drawings and as per instruction of engineer incharge/architect SeventySix Only

Providing,supplying,arranging and fixing Ebco Make Key Board Tray, Size : 705 X 284 Providing and fixing Key Board pull out tray

Rupees One Thousand Six

made out of high quality foil pressed on pre‐laminated MDF with side mouse pad tray having height adjustment on mounting brackets

106 40 1692.96 Hundred NinetyTwo Paise Nos.

with smooth sliding operation and with removable drawer with latches having load carrying capacity of 12.00 kg incl. all necessary

fixtures, fasteneres , labour and material as diretced by Engineer‐in‐ charge.

Providing Fixing and arrenging Computer C.P.U. trolly for storage of C.P.U. unit conveniently under the table,This saves valuable desk

Rupees Seven Hundred

top space.Soft vibration pads provided,Width adjustment of 95mm (3 3/4”) provided, wheel dia 30mm,load capacity 12kgs and set

107 40 758.91 FiftyEight Paise NinetyOne Nos.

height 43mm,material steel with Nylon Castors and Black / Anthracite / White Matt finish. As per Drawing and Instruction of

Architect/Engineer in charge.

Providing Fixing and arrenging FOOT REST made up of high impact polystyrene having over all size 450 mm x 350 mm with tilts of 0o Rupees One Thousand Five

108 40 to 20o for angular movement and non slippary platform surface including all materials and labour etc. complete as per drawing / 1576.21 Hundred SeventySix Paise Nos.

Photographs and instruction of engineer-in charge. As per Drawing and Instruction of Architect/Engineer in charge TwentyOne Only

Providing and fixing roller blinds with composition 100% Polyester . Fabric woven and semi opaque / coated translucent fabric &

Complete Blackout. The fabric shall be enclosed in the suitably created pocket along with tube i.e Palmate. Fabric Warranty 3Year.

Weight 190 GSM, Width 280 cm, Thickness 0.48mm, Light fastness is 4 to 5 grade. Mechanism made in UK with ball chain

mechanism & with 5 years mechanism warranty. The Roller tube extruded by non-rusting Aluminium alloy with 1.25 mm thickness.

Available in 32, 38, &45 mm diameters for small and big blinds respectively. Mechanism is designed with support beam to keep it Rupees Two Thousand Six

109 720 straight and have a pocket for holding the fabrics in position. The mounting brackets shall be universal and capable of mounting 2685.39 Hundred EightyFive Paise SQM

inside/ outside/ ceiling / wall with the clutch on either the right or left end of the tube. Mechanism to be operated with control unit made ThirtyNine Only

of high strength ABS plastic. Mechanism shall be operating with the use of a ball chain, made up of unbreakable polyethylene plastic,

1.50mm polyester cord with 4.50 mm balls. The blind shall be able to stop at any desired position with the help of stop lock. The

bottom channel of Roller Blind shall be matching shade with fabric and made of non-rusting aluminium powder coated with 1.50 mm

thickness. The fabric shall be enclosed in the suitably created pocket along with tube.

Providing,supplying,arranging and fixing Veneer Panneling -Providing and fixing wooden panneling made of framing the

skeleton(plywood frame structure)with 18mm + 18mm thick MR grade plywood for vertical and horizontal plywood (patti) one side

Rupees Eight Thousand Four

cover with 6mm thick MR grade plywood for grooving as per design.Fixing properly without any air gap and finishing with seletced 4-6

110 295 8464.81 Hundred SixtyFour Paise SQM

mm thick veneer with pu matt or glosy polish. Before installation,make hole/face plate for conduit pipes of eletcrical/networking cables

with openable stud from partition Including back painted glass and any kind of artwork and graphics all materials and labour

etc.complete as per detail drawing and elevation and instruction of engineer-in charge.

Estimated Rate With 1% Labour Cess

in Rs. (Excluding GST)

Quantity but Total Amount in

Quantity but Total Amount in

Item No. Description Unit

may be more or Rs.

In Figures In Words

Providing and fixing Heavy-Duty Platform Trolley. Designed to withstand rigorous industrial use, for transporting heavy loads with

ease and safety. This is foldable and multi-purpose cart is perfect for larger or multiple items and an ideal addition to any workspace,

job site, garden or grocery store. Crafted from durable plastic, the platform features a tubular steel handle providing both sturdiness

and comfort. Rupees Three Thousand Six

111 10 Platform-Size: 105 x 63W x 14H Cm., Item-Weight: 17.5Kg., Max-Capacity: 500Kg. Equipped with three 5" swivel castors and two rigid 3635.2 Hundred ThirtyFive Paise Nos.

wheels, this push cart glides effortlessly and smoothly beneath your load, ensuring easy manoeuvrability.Designed to offer a universal Twenty Only

fit, this foldable platform truck push dolly adapts to a variety of environments and uses. This hand cart is perfect for moving bulky,

large, heavy things like boxes, furniture, gardening supplies, in the home, office, warehouse, garage, workshops, schools, garden.

Package Content - 1 x Platform Trolley, 3 x 5" Swivel Castors, 2 x 5" Fixed Castors, 16 x Fasteners with 1 Year Warranty.

Providing and fixing Pendant luminaice Notch with LED, system power 32W, luminous fux of luminaire 2880lm, colour temperature of

4000K, Neutral white, CRI>80. 230V-SDCM 3 constant current driver, 70% of luminous fux after 50,000 operating hours, aluminium

Rupees FiftyOne Thousand

profile with White powder coat, snap-fit linear Deep down prismatic protruded diffuser for glare-free and unform illumination,

112 93 51746.26 Seven Hundred FourtySix RMT

Electronic control gear

Paise TwentySix Only

Protection Class 1, IP40

Providing and fixing Recessed liner spotlight luminaire with trim Crest with HPE (High-Performance Efficiency) LED (Light Emitting

Diode) -4 nos spot light with total system power-32w: ., Colour temperature of 4000 K, Neutral white, CRI > 80, 230 V constant current

driver, 70% of luminous flux after 50,000 operating hours; Energy efficient LEDs, Direct light emission, Luminaire magnetic profile in Rupees ThirtyFour Thousand

113 25 aluminium, Polyester powder white coloured coat applied over a 5- stage pre-treatment, With anti-glare reflectors , ZHLS (ZERO 34326.26 Three Hundred TwentySix RMT

HALOGEN LOW SMOKE) internal wiring, Electronic control gear, Paise TwentySix Only

Protection class I, IP20,

L = 1187mm, B = 64 mm, H = 64 mm, cutout 52mm

Providing and fixing Recessed liner Diffused light with blanker- luminaire with trim Crest with HPE (High-Performance Efficiency) LED

(Light Emitting Diode) -32w-Liner diffuse light in 1800mm , Colour temperature of 4000 K, Neutral white, CRI > 80, 230 V constant

current driver, 70% of luminous flux after 50,000 operating hours; Energy efficient LEDs, Direct light emission, Luminaire magnetic Rupees ThirtyFour Thousand

114 14 profile in aluminium, Polyester powder white coloured coat applied over a 5- stage pre-treatment, With anti-glare reflectors , ZHLS 34326.26 Three Hundred TwentySix RMT

(ZERO HALOGEN LOW SMOKE) internal wiring, Electronic control gear, Paise TwentySix Only

Protection class I, IP20,

L = 3400mm, B = 64 mm, H = 64 mm, cutout 52mm

Providing and fixing Pendant luminaire Volt Ring UP-DN with HE-High Efficiency LED (Light Emitting Diode) system power: 48W(24W/

Mtr UP- 24W/ Mtr DN), the luminous flux of luminaire 5280lm (3120lm for UP and 2160 lm for DN), color temperature of 4000K,

CRI>80, 230 V constant current driver, 70% of luminous flux after 50,000 operating hours, direct-indirect light emission, luminaire Rupees SeventyTwo

115 6 profile in aluminium, polyster powder White coloured coated, Snap FIt Opal Prismatic diffuser for uniform illumination, Electronic 72972.5 Thousand Nine Hundred Nos.

control gear SeventyTwo Paise Fifty Only

Protection class I, IP20

Ø = 1200mm, B = 55 mm, H = 75 mm, PL max = 1500 mm

Providing and fixing Recessed downlight Blair with HPE (High-Performance Efficiency) with LED (Light Emitting Diode), system power:

15 W, Luminous flux of luminaire 1500lm, Colour temperature of 4000 K, Neutral white, CRI > 80, 230V constant current driver, 70% of

luminous flux after 50,000 operating hours; energy-efficient LEDs, direct light emission, housing in die-cast aluminium, Polyester

Rupees One Thousand Eight

powder white coloured coat applied over a 5-stage pre-treatment trim, Deep down prismatic diffuser for homogenous light distribution,

116 81 1891.45 Hundred NinetyOne Paise Nos.

ZHLS (ZERO HALOGEN LOW SMOKE) wiring, Electronic control gear,

FourtyFive Only

Protection class II, IP

Estimated Rate With 1% Labour Cess

in Rs. (Excluding GST)

Quantity but Total Amount in

Quantity but Total Amount in

Item No. Description Unit

may be more or Rs.

In Figures In Words

adjustable tubular light fixture 3 nos. fixed on a track of length = 2 meters that is ceiling suspended with ss powder coated finish as per Rupees TwentySix Thousand

117 2 image. All light fixture to comply with Leed guideline and cpst includung supply instalation and all other necessary hardware and 26270.1 Two Hundred Seventy Paise Nos.

cable. etc complete as directed by EIC. Ten Only

Providing and Fixing strech fabric ceiling including Material-stretch ceilings are made of a non-flammable vinyl sheet. They can

contain up to 80% recycled materials and are 100% recyclable. Installation-Barrisol stretch ceilings are installed by stretching the vinyl

sheet under heat and locking it into profiled rails. The rails can be made of aluminum or PVC and come in three types: tradition, star, Rupees Two Thousand Seven

118 95 and mini-star. stretch ceilings meet current international standards and are respectful of safety and hygiene standards. stretch ceilings 2743.77 Hundred FourtyThree Paise SQM

to have very low VOC emissions and are asbestos free. Lighting to be incorporate in stretch ceilings can be integrated with lighting, SeventySeven Only

heating, air conditioning, and sound systems. Thermal insulation-stretch ceilings provide light thermal insulation. stretch ceilings can

absorb noise pollution.

Providing and fixing Suspended anti bacterial gypsum ceiling mold resistant Ceiling includes Perimeter Channel {Material-

GI(IS513),YS-260Mpa,Finish- Galvanised 150GSM(IS27)} is fixed along the perimeter of existing wall/ partition with the help of

approved anchor {HPS - 1 (6x40) impact anchor}, at 600mm centres.Ceiling Angle {Material-GI(IS513),YS-260Mpa,Finish-Galvanised

150GSM(IS277)} is suspended by fixing it to the soffit cleat {GI(IS513)YS-260Mpa,Finish-Galvanised 150GSM(IS277) }. Soffit Cleat

and Rawl Plug- Ø8x45mm {Material-IS 513 CR2 grade, Zinc coating (7 to 8 microns) pull out load- 6.8kN for M30 concrete grade}

creating 1220mm x 1220mm grid. Intermediate channel {Material-GI(IS513),YS-260Mpa,Finish-Galvanised 150GSM(IS277) } is fixed

to the Ceiling Angle with M6 x 12mm Hex Bolt & Hex Nut arrangement {Material–As per EN 10083 Finish – Zinc Plating} or with 2 Nos

of Ø4.2x13 metal to metal screw {Material-Carbon steel EN-ISO 7049/50 Finish- Zinc Coating Thickness- 4.14micron.} Ceiling Section

Rupees One Thousand

119 483 {Material-GI(IS513),YS-260Mpa, Finish-Galvanised 150GSM(IS277)} is then fixed to the Intermediate Channel {Material-GI(IS513),YS- 1065.4 SQM

SixtyFive Paise Fourty Only

260Mpa,Finish-Galvanised 150GSM(IS277)} with the help of Connecting Clip {Material-High carbon spring steel wire(BS970Gr.En42)-

46-48HRC,Finish- Zinc plating 4-6 micron} and in direction perpendicular to the Intermediate channel at 457mm c/c. Single layer of

12.5mm tapered edge Anti bectirial gypsum board (Conforms to EN 15283-1 and Types GM - H1) is then screw fixed to ceiling

section with 25mm drywall screws {Material-Carbon steel EN-ISO 7049/50,Finish-Case hardened Grey Phosphating} at 230mm

centres on ceiling section & 150mm at periphery of ceiling. Finally square and tapered edges of the boards are to be jointed and

finished so as to have a flush look which includes filling and finishing with necessary Jointing compound (Conforms to ASTM C475),

Joint Paper tape to be applied. Serrated section has effective thickness of 2T (2xdepth), better load carrying capacity, enhanced

screw retention, Improved acoustic performance & fire resistance as compared to plain steel section.

Providing and fixing wooden planks celling with tounged and grooved jointing and wood screws including indian teak wood frame

work 50 mm x 50 mm sanction and cover filling etc complete INCLUDING FRAME WOR OR Providing, Cutting, Making, Fabricating,

placing, installing and fixing in position in true line and level as per detail VENEER BOARD FALSE CEILING consisting of 4mm Thick

Veneer approved make, over minimum 12 mm thick grade 710 full gurjan plywood or approved equivalent with approved water base Rupees Two Thousand Six

120 281 melamine polishing ( primer + 2 coats ) including approved teak wood beads on all exposed surfaces finished to match the shade of 2628.18 Hundred TwentyEight Paise SQM

veneer board including 100mm ( web ) x18mm tk. ply frame work in square grid of 600mmx600mm to receive veneered board ( Eighteen Only

12mm+4mm ) in work man like manner as approved and as directed at all levels. It allows for given pattern, shape, size, any type of

cove light, palmets, recessed work etc.. completed. No extra shall paid seperately in any case. Basic PRICE for Veneer Rs. 1200 per

Estimated Rate With 1% Labour Cess

in Rs. (Excluding GST)

Quantity but Total Amount in

Quantity but Total Amount in

Item No. Description Unit

may be more or Rs.

In Figures In Words

Acoustic False ceiling Acoustic wooden perforated Ceiling tiles/ Panels with back treatment:

Providing and fixing of Wooden perforated Panel (min. 45% perforation) of size 600mmx 2440mm, made out of 16mm thick both side

pre laminated high density MDF board of 700-750 kg density with Acoustical transparent black fabric. The edge joint of the panels

shall be connected through dowels to avoid any sagging or unevenness. Installation of ceiling panels on GI Channels of section 50mm

Rupees Four Thousand Six

x 35mm x1.0mm on 40 X 40 X 5mm GI angle Supports (1200 x 1200 mm C-to-C) Fixed to solid wall having air gap as per drawing. GI

121 201 4697.03 Hundred NinetySeven Paise SQM

panels fixed horizontally at spacing of 600mm center to centre and screwed aluminum extruded keel for perforated wood works with

30mm thick compressed rock wool tile (UL certified fire retardant) of 90kg/mtr3 confirming to IS8183 as infill. The infill to be held in

position with chicken wire mesh. The final color of the material and design horizontal or vertical to be approved by the consultant and

the architect both to ensure the final looks of the installation is as per the design intended for, contractor to take a final sign off before

start of work. The panels shall be mounted on special aluminum splines using clips. Achieved NRC better than 0.90.

Plain wooden Ceiling tiles/ panels with back treatment:

Providing and fixing of Plain Wooden Panel of size 600mmx 2440mm, made out of 16mm thick both side pre laminated high density

MDF board of 700-750 kg density with Acoustical transparent black fabric. The edge joint of the panels shall be connected through

dowels to avoid any sagging or unevenness. Installation of ceiling panels on GI Channels of section 50mm x 35mm x1.0mm on 40 X

Rupees Three Thousand

40 X 5mm GI angle Supports (1200 x 1200 mm C-to-C) Fixed to solid wall having air gap as per drawing. GI panels fixed horizontally

122 200 3757.48 Seven Hundred FiftySeven SQM

at spacing of 600mm center to centre and screwed aluminum extruded keel for perforated wood works with 30mm thick compressed

Paise FourtyEight Only

rock wool tile (UL certified fire retardant) of 90kg/mtr3 confirming to IS8183 as infill. The infill to be held in position with chicken wire

mesh. The final color of the material and design horizontal or vertical to be approved by the consultant and the architect both to ensure

the final looks of the installation is as per the design intended for, contractor to take a final sign off before start of work. The panels

shall be mounted on special aluminum splines using clips.

Acoustic fabric panel with back treatment:

Proving & fixing of Acoustic Ceiling tile, size of 1200 x 2700 mm thickness 40 mm natural square edge. Size of Ceiling tile should be

customizable as per the drawings. Tiles are manufactured from high density glass wool, demountable panels (with standard fabric

approved by the architect/consultant) & wrapped around in concealed system with grippers and wooden batten. Acoustics-Sound

absorption(Alpha W) - 1 at minimum 50 mm overall depth of system as per EN ISO 354, Acoustics-Sound absorption Class - Class A

at 50 mm overall depth of system as per EN ISO 11654, NRC – Minimum 0.9 at 50 mm overall depth of system, Articulation Class -

as per ASTM E1111, ASTM E1110, Humidity Resistance -Permanent ambient RH upto 95% at 30 * C without sagging , warping or

delaminating (EN 13964:2014). Fire Safety- Tested and classified as non combustible according to EN ISO 1182 with reaction to fire

classification class A2 s1 d0 according to EN 13501 . Indoor Health & Well-being - Complying with the French regulation on VOC

emissions, A+ level.Certified by the Finnish Building Information Group (RTS) with the M1 label. Free from substances of very high

concern (SVHC) above 100 ppm. Product Certified under GRIHA Council of India for Green ratings. Environmental Product Rupees Eleven Thousand

123 36 declaration (EPD) acc to international ISO 14025 & EN 15804 series of standards. Circularity - Re-cycled content of more than 70%, 11741.53 Seven Hundred FourtyOne SQM

CE marking - CE-marked according to the harmonised standard EN 13964:2014. Maintenance - Daily dusting & vacuum cleaning, Paise FiftyThree Only

weekly wet cleaning, Fabric – Fire Retardant Fabric to be applied on the wall panel as approved by architect. Base rate of fabric

Framing system - Providing and fixing 24 mm Gypsteel pre coated (Exposed portion only) GI T Grid system in 1200x2700mm module

which includes providing and fixing ceiling angle along the perimeter of the room with help of nylon sleeves and wooden screws at

300mm centers. Then suspending the main tee of size from the soffit with help of soffit cleat, rawl plugs and wire rod with Leveling

spring clip at 1200mm c/c. 1200mm Cross Tee is then interlocked into the pre-cut slots in the main Tees at 2700mm centres in

direction perpendicular to the main Tee to make a grid of 1200mm. 2700mm Cross tees are then interlocked into the pre cut slots in

the 1200mm tees at 1200mm centres and in direction parallel to the main tee. Cross Tees having length more than 2700mm are to be

supported independently. Finally the space bar (2 meter long) get interlock in the main T at every 1200 mm and screws to be put

inside the main T and space Bar to lock and give strength to the system.

Estimated Rate With 1% Labour Cess

in Rs. (Excluding GST)

Quantity but Total Amount in

Quantity but Total Amount in

Item No. Description Unit

may be more or Rs.

In Figures In Words

Acoustic wall panelling

Acoustic wooden perforated panels with black treatment:

Providing and fixing Wooden perforated Panel (min. 45% perforation) of size 600mmx 2440mm, made out of 16mm thick both side

pre laminated high density MDF board of 700-750 kg density with Acoustical transparent black fabric. The edge joint of the panels

shall be connected through dowels to avoid any sagging or unevenness. Installation of panels on GI Channels of section 50mm x Rupees Four Thousand Six

124 184 35mm x 1.0mm on 40 X 40 X 5mm GI angle Supports (1200 x 1200 mm C-to-C) Fixed to solid wall having air gap as per drawing. GI 4697.03 Hundred NinetySeven Paise SQM

panels fixed horizontally at spacing of 600mm centre to centre and screwed aluminium extruded keel for perforated wood works with Three Only

30mm thick compressed rockwool tile (UL certified fire retardant) of 90kg/mtr3 confirming to IS8183 as infill. The infill to be held in

position with chicken wire mesh. The final color of the material and design horizontal or vertical to be approved by the consultant and

the architect both to ensure the final looks of the installation is as per the design intended for, contractor to take a final sign off before

start of work. The panels shall be mounted on special aluminium splines using clips. Achieved NRC better than 0.90.

Plain wooden Acoustic Wall panel with back treatment

Providing and fixing Plain Wooden Panel of size 600mmx 2440mm, made out of 16mm thick both side pre laminated high density MDF

board of 700-750 kg density with Acoustical transparent black fabric. The edge joint of the panels shall be connected through dowels

to avoid any sagging or unevenness. Installation of panels on GI Channels of section 50mm x 35mm x 1.0mm on 40 X 40 X 5mm GI

Rupees Three Thousand

angle Supports (1200 x 1200 mm C-to-C) Fixed to solid wall having air gap as per drawing. GI panels fixed horizontally at spacing of

125 136 3757.48 Seven Hundred FiftySeven SQM

600mm centre to centre and screwed aluminium extruded keel for perforated wood works with 30mm thick compressed rockwool tile

Paise FourtyEight Only

(UL certified fire retardant) of 90kg/mtr3 confirming to IS8183 as infill. The infill to be held in position with chicken wire mesh. The final

color of the material and design horizontal or vertical to be approved by the consultant and the architect both to ensure the final looks

of the installation is as per the design intended for, contractor to take a final sign off before start of work. The panels shall be mounted

on special aluminium splines using clips.

Estimated Rate With 1% Labour Cess

in Rs. (Excluding GST)

Quantity but Total Amount in

Quantity but Total Amount in

Item No. Description Unit

may be more or Rs.

In Figures In Words

Acoustic fabric panel with back treatment:

Proving & fixing of Acoustic Wall panel, size of 1200 x 2700 mm thickness 40 mm natural square edge. Size of Ceiling tile should be

customizable as per the drawings. Tiles are manufactured from high density glass wool, demountable panels (with standard fabric

approved by the architect/consultant) & wrapped around in concealed system with grippers and wooden batten. Acoustics-Sound

absorption(Alpha W) - 1 at minimum 50 mm overall depth of system as per EN ISO 354, Acoustics-Sound absorption Class - Class A

at 50 mm overall depth of system as per EN ISO 11654, NRC – Minimum 0.9 at 50 mm overall depth of system, Articulation Class -

as per ASTM E1111, ASTM E1110, Humidity Resistance -Permanent ambient RH upto 95% at 30 * C without sagging , warping or

delaminating (EN 13964:2014). Fire Safety- Tested and classified as non combustible according to EN ISO 1182 with reaction to fire

classification class A2 s1 d0 according to EN 13501 . Indoor Health & Well-being - Complying with the French regulation on VOC

emissions, A+ level.Certified by the Finnish Building Information Group (RTS) with the M1 label. Free from substances of very high

concern (SVHC) above 100 ppm. Product Certified under GRIHA Council of India for Green ratings. Environmental Product Rupees Eleven Thousand

126 174 declaration (EPD) acc to international ISO 14025 & EN 15804 series of standards. Circularity - Re-cycled content of more than 70%, 11741.53 Seven Hundred FourtyOne SQM

CE marking - CE-marked according to the harmonised standard EN 13964:2014. Maintenance - Daily dusting & vacuum cleaning, Paise FiftyThree Only

weekly wet cleaning, Fabric – Fire Retardant Fabric to be applied on the wall panel as approved by architect. Base rate of fabric

Framing system - Providing and fixing 24 mm Gypsteel pre coated (Exposed portion only) GI T Grid system in 1200x2700mm module

which includes providing and fixing wall angle along the perimeter of the room with help of nylon sleeves and wooden screws at

300mm centers. Then suspending the main tee of size from the soffit with help of soffit cleat, rawl plugs and wire rod with Leveling

spring clip at 1200mm c/c. 1200mm Cross Tee is then interlocked into the pre-cut slots in the main Tees at 2700mm centres in

direction perpendicular to the main Tee to make a grid of 1200mm. 2700mm Cross tees are then interlocked into the pre cut slots in

the 1200mm tees at 1200mm centres and in direction parallel to the main tee. Cross Tees having length more than 2700mm are to be

supported independently. Finally the space bar (2 meter long) get interlock in the main T at every 1200 mm and screws to be put

inside the main T and space Bar to lock and give strength to the system.

DOOR - Acoustic Door 1500 mm x 2400 mm (Double leaf door):

Providing & fixing of Acoustic Fire Door

Shutter Thickness - 75 mm

Fire Resisting Duration/ STC - 2 Hour (STC 50 db)

Door Leaf - Double

Frame required - yes

Frame Section - 140mm X 70mm

Frame material & Finish - FR Painted Rupees One Lakh

RMT of Frame - as required TwentyNine Thousand Nine

Area of Shutter - as required Hundred EightyOne Paise

Door Finish including Pasting, handling & cutting charges - Both side Laminated Two Only

Hardware & Accessories: -

SS Hinges - 4" Fire Rated X 8 nos

Door Closing Mechanism/ Door Closer

Auto Drop Seal (double)

Perimetric seals all around of door

Tower Bolt - 12" Single Pc

S.S. Handles - Size - 12" Both Side

Estimated Rate With 1% Labour Cess

in Rs. (Excluding GST)

Quantity but Total Amount in

Quantity but Total Amount in

Item No. Description Unit

may be more or Rs.

In Figures In Words

Heavy Carpet flooring with Acoustic underlay:

Providing & fixing of the designed carpet with 8mm profile underlay having 28kg density. Complete with adhesive after rectification of

Specification of Carpet:

100% Nylon 6.0 grade

Rupees One Thousand Two

Phsbn 1100/68*2 DTEX, Semi dull, Z twist

128 452 1260.96 Hundred Sixty Paise SQM

Flammable pass 16CFR 1631 (FF-2-70)

Color fastness to washing & water- 4 or more

Color fastness to rubbing- 4 or more (AATCC: 165:2008)

Color fastness to lighting- 4 or more (AATCC 16:

Formaldehyde approved: no hazardous chemicals used

Pile weight of 1400 GSM

Stage Flooring:

Providing and fixing of Solidwood flooring for stage floor 22mm thick, kiln dried, prefinished solid hardwood of European origin is fixed

on batters of thickness 50mm and width 50mm made of Pine wood. These pine wood batterns are placed of shock pads made of

Rupees Ten Thousand Four

vibration isolation membrane of thickness 10mm at a minimum distance of 600 mm from centre to centre. vibration isolation

129 72 10451.72 Hundred FiftyOne Paise SQM

membrane is fixed to the ground level. The two batterns are placed parallel at a distance of 500mm from each other in direction

SeventyTwo Only

perpendicular to the floor to be laid. Floor is nailed onto these batterns at 45 degree angle throught the tongue and the next plank is

then grooved in the tongue. Adequate gap is left on all side to maintain space for expansion/ contraction, finished as per directions of

the consultant/ engineer in charge. including all framework as required to construct the stage as per the required height.

Estimated Rate With 1% Labour Cess

in Rs. (Excluding GST)

Quantity but Total Amount in

Quantity but Total Amount in

Item No. Description Unit

may be more or Rs.

In Figures In Words

Acoustic Ceiling High density glass wool tiles:

Proving & fixing of Acoustic Ceiling 20 mm thickness, 4mm beveled edge in concealed system, easily demountable tiles,

manufactured from High density glass wool & Recycled Content of minimum 70%, visible surface has an Acoustic coating, back of the

tile covered with glass tissue . Edges of the tiles are painted . Size 600x600x20mm and multiple size options, Colour – Dark Diamond

(Black), Acoustics-Sound absorption(Alpha W) - 0.9 at 200 mm overall depth of system as per EN ISO 354, Acoustics-Sound

absorption Class - Class A as per EN ISO 11654, Acoustics-Articulation class - 180 as per ASTM E1111, ASTM E1110, NRC - 0.9 at

65 mm overall depth of system as per ASTM C 423, Humidity Resistance - Permanent ambient RH upto 95% at 30 * C without sagging

, warping or delaminating (EN 13964). Fire Safety-Tested and classified as non combustible according to EN ISO 1182 with reaction

to fire classification class A2 s1 d0 according to EN 13501 -1. Light Reflectance-85% light reflectance (of which more than 99% is

diffuse reflection). Indoor Health & Well-being - Complying with the French regulation on VOC emissions, A+ level. Certified by the

Rupees Three Thousand Six

Finnish Building Information Group (RTS) with the M1 label. Free from substances of very high concern (SVHC) above 100 ppm as

130 72 3671.63 Hundred SeventyOne Paise SQM

defined. Product Certified under GRIHA council of India for Green ratings. Environmental Product declaration (EPD) acc to

SixtyThree Only

international ISO 14025 & EN 15804 series of standards. Circularity - Re-cycled content of more than 70%, CE marking - CE-marked

according to the harmonised standard EN 13964:2014, Maintenance - Weekly wet wiping, daily dusting, vacuum cleaning.

Framing system - Providing and fixing 24 mm Gypsteel pre coated (Exposed portion only) GI T Grid system in 1200/600x600mm

module which includes providing and fixing wall angle along the perimeter of the room with help of nylon sleeves and wooden screws

at 300mm centers. Then suspending the main tee of size from the soffit with help of soffit cleat, rawl plugs and wire rod with Leveling

spring clip at 1200mm c/c. 1200mm Cross Tee is then interlocked into the pre-cut slots in the main Tees at 600mm centres in direction

perpendicular to the main Tee to make a grid of 600x1200mm. 600mm Cross tees are then interlocked into the pre cut slots in the

1200mm tees at 1200mm centres and in direction parallel to the main tee. Cross Tees having length more than 600mm are to be

supported independently. Finally the space bar (2 meter long) get interlock in the main T at every 1200 mm and screws to be put

inside the main T and space Bar to lock and give strength to the system.

Audio system Supply, Installation, Testing and Commissioning of FOH Left, Center & Right Speaker Including all Accessories to

install the equipment.- Rupees One Lakh FourtyTwo

131 3 Power handling AES / Peak: 450 W / 1800 W 142902.48 Thousand Nine Hundred Two Nos.

LF AES Power: 225W, HF AES Power: 80W Paise FourtyEight Only

IP rating (IEC 60529): IP55 or better

Rupees Seventeen Thousand

Supply, Installation, Testing and Commissioning of OEM manufactured Horizontal u-bracket for FOH speaker Including all

132 3 17224.94 Two Hundred TwentyFour Nos.

Accessories to install the equipment

Paise NinetyFour Only

Supply, Installation, Testing and Commissioning of Delay Fill Loudspeaker Including all Accessories to install the equipment.- Rupees One Lakh

Power handling AES / Peak: 300 W / 1200 W TwentyFour Thousand Eight

Nominal impedance: 8 Ω. Hundred Twelve Paise

IP rating (IEC 60529): IP55 or better EightyFive Only

Rupees TwentyFour

Supply, Installation, Testing and Commissioning of OEM Manufactured Horizontal u-bracket for Delay Fill Speakers Including all Thousand Six Hundred

Accessories to install the equipment. TwentyEight Paise SixtyFive

Supply, Installation, Testing and Commissioning of Surround Speaker for Left & Right Including all Accessories to install the

Rupees FourtyFive Thousand

135 8 45328.8 Three Hundred TwentyEight Nos.

RMS Power (Passive) : 250 W RMS

Paise Eighty Only

RMS Power (Bi-Amp) : LF-250 W RMS @ 8 Ohms and HF- 30 W RMS @ 8 Ohms

Estimated Rate With 1% Labour Cess

in Rs. (Excluding GST)

Quantity but Total Amount in

Quantity but Total Amount in

Item No. Description Unit

may be more or Rs.

In Figures In Words

Rupees Eight Thousand Two

Supply, Installation, Testing and Commissioning of OEM Manufactured Horizontal u-bracket for Surround Speaker Including all

136 8 8241.6 Hundred FourtyOne Paise Nos.

Accessories to install the equipment.

Supply, Installation, Testing and Commissioning of Rear Surround Left and Right Speaker Including all Accessories to install the

Rupees FourtyFive Thousand

137 4 45328.8 Three Hundred TwentyEight Nos.

RMS Power (Passive) : 250 W RMS

Paise Eighty Only

RMS Power (Bi-Amp) : LF-250 W RMS @ 8 Ohms and HF- 30 W RMS @ 8 Ohms

Rupees Eight Thousand Two

Supply, Installation, Testing and Commissioning of OEM manufactured Horizontal u-bracket for Rear surround speaker Including all

138 4 8241.6 Hundred FourtyOne Paise Nos.

Accessories to install the equipment.

Supply, Installation, Testing and Commissioning of Front Fills Loudspeaker Including all Accessories to install the equipment- Rupees One Lakh

Power handling AES / Peak: 300 W / 1200 W TwentyFour Thousand Eight

Nominal impedance: 8 Ω. Hundred Twelve Paise

IP rating (IEC 60529): IP54 EightyFive Only

Rupees TwentyFour

Supply, Installation, Testing and Commissioning of OEM manufactured Horizontal u-bracket for Front Fills Loudspeakers Including all Thousand Six Hundred

Accessories to install the equipment TwentyEight Paise SixtyFive

Supply, Installation, Testing and Commissioning of Stage Monitor Loudspeaker Including all Accessories to install the equipment-

Rupees Two Lakh FiftyNine

Power handling AES / peak (passive): 500 W / 2000 W.

141 2 259072.64 Thousand SeventyTwo Paise Nos.

Nominal impedance: 8 Ω.

IP rating options (IEC 60529): Standard IP53.

Supply, Installation, Testing and Commissioning of VIP Room Speaker Including all Accessories to install the equipment- Rupees ThirtyNine Thousand

142 2 Two Way Analog Monitor 39834.4 Eight Hundred ThirtyFour Nos.

Amplifier Power : 50 W Bass (Class D) + 50 W Treble (Class D) Paise Fourty Only

Supply, Installation, Testing and Commissioning of Waiting Room Speaker Including all Accessories to install the equipment- Rupees ThirtyNine Thousand

143 4 Two Way Analog Monitor 39834.4 Eight Hundred ThirtyFour Nos.

Amplifier Power : 50 W Bass (Class D) + 50 W Treble (Class D) Paise Fourty Only

Rupees Fourteen Thousand

Supply, Installation, Testing and Commissioning of Wall mount black for VIP Room and Waiting Room speaker Including all

144 6 14525.82 Five Hundred TwentyFive Nos.

Accessories to install the equipment.

Paise EightyTwo Only

Supply, Installation, Testing and Commissioning of Subwoofer with mounting arrangements Including all Accessories to install the

Rupees Two Lakh FourtyTwo

145 2 242591.5 Thousand Five Hundred Nos.

Power handling AES / peak (passive): 1250 W / 5000 W.

NinetyOne Paise Fifty Only

Nominal impedance: 8 Ω.

Rupees Five Lakh

Supply, Installation, Testing and Commissioning of 4-channel Class D/ TD 8000 Watt Network Amplifier with DSP and DANTE

TwentySeven Thousand Six

146 1 Including all Accessories to install the equipment. - 527616.93 Nos.

Hundred Sixteen Paise

Power Handling : 4 × 2000 W @ 2/4 Ohms, 4 × 1500 W @ 8 ohms, 4 × 750 W @ 16 ohms, 4 x 2000 W @70V RMS & 100V RMS

NinetyThree Only

Rupees Three Lakh FiftyFive

Supply, Installation, Testing and Commissioning of 4-channel Class D / TD 4000Watt Network amplifier with DSP and DANTE

Thousand Four Hundred

147 3 Including all Accessories to install the equipment. - 355456.77 Nos.

FiftySix Paise SeventySeven

Power Handling : 4 × 1000 W @ 2/4 Ohms, 4 × 1000 W @ 8 ohms, 4 × 700 W @ 16 ohms

Estimated Rate With 1% Labour Cess

in Rs. (Excluding GST)

Quantity but Total Amount in

Quantity but Total Amount in

Item No. Description Unit

may be more or Rs.

In Figures In Words

Supply, Installation, Testing and Commissioning of 4-channel Class D / TD 2000Watt Network amplifier with DSP and DANTE Rupees Two Lakh NinetyEight

148 3 Including all Accessories to install the equipment. - 298071.2 Thousand SeventyOne Paise Nos.

Power Handling : 4 × 500 W @ 2/4 Ohms, 4 × 500 W @ 8 ohms, 4 × 425 W @ 16 ohms, 4 x 400 W @70V RMS Twenty Only

Rupees Three Lakh

Supply, Installation, Testing and Commissioning of 12 x 8 Fixed /Chassis based Digital Signal Processor with Dante Including all FiftySeven Thousand

Accessories to install the equipment NinetyEight Paise NinetyOne

Rupees FourtyEight

150 1 Supply, Installation, Testing and Commissioning of Antenna distribution system Including all Accessories to install the equipment 48082.87 Thousand EightyTwo Paise Nos.

EightySeven Only

Rupees TwentySix Thousand

Supply, Installation, Testing and Commissioning of Pair of UHF wide-band directional LPDA (log periodic dipole array) antennas

151 1 26784.51 Seven Hundred EightyFour Nos.

Including all Accessories to install the equipment.

Paise FiftyOne Only

Rupees ThirtyFour Thousand

152 1 Supply, Installation, Testing and Commissioning of Pair of In-Line RF Booster Including all Accessories to install the equipment. 34008.96 Nos.

Eight Paise NinetySix Only

Rupees TwentyOne

Supply, Installation, Testing and Commissioning of RF antenna cable with BNC to BNC connectors, RG8-type cable. 100' (30 m). Thousand Nine Hundred

Including all Accessories to install the equipment. SeventySeven Paise Sixty

Rupees Seventeen Thousand

Supply, Installation, Testing and Commissioning of RF antenna cable with BNC to BNC connectors, RG8-type cable. 50' (15 m)

154 2 17856.8 Eight Hundred FiftySix Paise Nos.

Including all Accessories to install the equipment.

Rupees FourtyFive Thousand

Supply, Installation, Testing and Commissioning of UHF Wireless Handheld microphone system Including all Accessories to install the

155 2 45328.8 Three Hundred TwentyEight Nos.

Paise Eighty Only

Rupees FourtyThree

Supply, Installation, Testing and Commissioning of UHF Wireless Microphone System with Body-pack Transmitter Including all

156 2 43268.4 Thousand Two Hundred Nos.

Accessories to install the equipment.

SixtyEight Paise Fourty Only

Rupees Nine Thousand Nine

Supply, Installation, Testing and Commissioning of Miniature Cardioid Condenser lavalier Microphone Including all Accessories to

157 1 9958.6 Hundred FiftyEight Paise Sixty Nos.

install the equipment

Rupees TwentyThree

Supply, Installation, Testing and Commissioning of Omnidirectional Condenser Headworn Microphone Including all Accessories to

158 1 23351.2 Thousand Three Hundred Nos.

install the equipment

FiftyOne Paise Twenty Only

Rupees ThirtyTwo Thousand

Supply, Installation, Testing and Commissioning of Networked Two-Bay Recharging Station

159 2 32232.9 Two Hundred ThirtyTwo Paise Nos.

NiMH batteries are charged in the transmitters Including all Accessories to install the equipment

Rupees ThirtyThree

Supply, Installation, Testing and Commissioning of 18" Wired Condenser Gooseneck Microphone Including all Accessories to install Thousand Three Hundred

the equipment FiftySeven Paise EightyEight

Estimated Rate With 1% Labour Cess

in Rs. (Excluding GST)

Quantity but Total Amount in

Quantity but Total Amount in

Item No. Description Unit

may be more or Rs.

In Figures In Words

Rupees Eleven Thousand Six

Supply, Installation, Testing and Commissioning of Hypercardioid Dynamic Handheld Microphone with Switch Including all

161 4 11675.6 Hundred SeventyFive Paise Nos.

Accessories to install the equipment

Rupees Nine Thousand Two

162 4 Supply, Installation, Testing and Commissioning of Wired instrument Microphone Including all Accessories to install the equipment 9271.8 Hundred SeventyOne Paise Nos.

Rupees Seven Thousand One

Supply, Installation, Testing and Commissioning of Active DI Box with Midas Transformer and Phantom/Battery Operation Including all

163 4 7140.66 Hundred Fourty Paise Nos.

Accessories to install the equipment.

Rupees Four Lakh ThirtyEight

Supply, Installation, Testing and Commissioning of Digital Console for Live and Studio with Thousand Seven Hundred

40 Input Channels Including all Accessories to install the equipment. FourtyNine Paise Thirteen

Rupees One Lakh

SeventyNine Thousand Four

165 1 Supply, Installation, Testing and Commissioning of 32 Input, 16 Output Stage Box Including all Accessories to install the equipment 179465.65 Nos.

Hundred SixtyFive Paise

Supply, Installation, Testing & Commissioning of Floor Junction Box with 4x XLR inputs for microphones with 1 x XLR Balanced Line Rupees Three Thousand Four

output for Monitor Speakers Included all Accessories to install the equipment. Hundred ThirtyFour Only

Rupees One Lakh ThirtyFour

Supply, Installation, Testing & Commissioning of Portable Digital Multimedia Lectern with wheels, annotation Screen & timer with

167 1 134612.8 Thousand Six Hundred Nos.

provisioning of Microphone Included all Accessories to install the equipment.

Twelve Paise Eighty Only

Rupees Three Lakh

168 1 Supply, Installation, Testing and Commissioning of Multichannel AV receiver. 377740 SeventySeven Thousand Nos.

Seven Hundred Fourty Only

Rupees Sixteen Lakh

VIDEO SYSTEM Supply, Installation, Testing & Commissioning of 11,000 lumen, 4K UHD, 1DLP laser projector with Lens Including NinetyOne Thousand

all Accessories to install the equipment. FourtyEight Paise FiftyEight

Rupees Three Lakh Three

Supply, Installation, Testing & Commissioning of Low Noise Motorized Tensioned Professional Projection Screen with matt white

Thousand Two Hundred

170 1 fabric of size 5 meter (H) x 8.9 meter (W) with black drop as required with IR remote and relay for automation operation Including all 303222.2 Nos.

TwentyTwo Paise Twenty

Accessories to install the equipment.

Rupees Two Lakh Fourty

Supply, Installation, Testing & Commissioning of Low Noise Motorized Projector ceiling Lift (50Kg load bearing capacity, Travel

171 1 240380 Thousand Three Hundred Nos.

distance 6mtrs) Including all Accessories to install the equipment.

Supply, Installation, Testing and Commissioning of 65" 4K LED display, Brightness- 500 nits, industrial grade with Metal Frame

Rupees One Lakh ThirtyFour

Design, Native Contrast Ratio- 1100:1 to 5000:1(Dynamic Contrast), Haze for lesser reflection on screen- 3% or better, Operating

172 2 134269.4 Thousand Two Hundred Nos.

Hour- 24/7, Input- DP 1.2 x 2, HDMI x 2, USB x 1, with mounts Including all Accessories to install the equipment. - For Stage Video

SixtyNine Paise Fourty Only

Supply, Installation, Testing and Commissioning of Portable Trolly for Stage Video Monitor at Stage Area - Heavy Duty portable trolly Rupees ThirtySeven

173 2 for above monitor display, adjustable height, tilt movement upto 15-degree movement wheels with brake facility Including all 37774 Thousand Seven Hundred Nos.

Accessories to install the equipment- SeventyFour Only

Estimated Rate With 1% Labour Cess

in Rs. (Excluding GST)

Quantity but Total Amount in

Quantity but Total Amount in

Item No. Description Unit

may be more or Rs.

In Figures In Words

Rupees One Lakh One

Supply, Installation, Testing & Commissioning of 55" 4K LED display, Brightness- 500 nits, industrial grade with Metal Frame Design,

Thousand Five Hundred

174 2 Native Contrast Ratio- 1100:1 to 5000:1(Dynamic Contrast), Haze for lesser reflection on screen- 3% or better, Operating Hour- 24/7, 101577.72 Nos.

SeventySeven Paise

Input- DP 1.2 x 2, HDMI x 2, USB x 1, with mounts Including all Accessories to install the equipment. - For VIP Rooms

SeventyTwo Only

Supply, Installation, Testing & Commissioning of 75" 4K LED display, Brightness- 500 nits, industrial grade with Metal Frame Design,

Rupees Two Lakh FourtyFive

Portrait and Landsacpe orientation, Native Contrast Ratio- 1100:1 to 5000:1(Dynamic Contrast), Haze for lesser reflection on screen-

175 2 245187.6 Thousand One Hundred Nos.

3% or better, Operating Hour- 24/7, Input- DP 1.2 x 2, HDMI x 2, USB x 1, with mounts Including all Accessories to install the

EightySeven Paise Sixty Only

equipment. - For Waiting Area

Supply, Installation, Testing & Commissioning of 4K PTZ Camera support 25X Optical Zoom with 59.2°wide-angle lens with HDMI Rupees One Lakh FourtyFour

176 3 Output and USB, Ethernet Out, 3G-SDI Out, Ethernet Controls, Built with high quality CMOS sensor, with resolution up to 4K@60fps 144228 Thousand Two Hundred Nos.

Including all Accessories to install the equipment. TwentyEight Only

Rupees Three Lakh Four

177 1 Supply, Installation, Testing & Commissioning of Streamer cum Recorder Including all Accessories to install the equipment 304939.2 Thousand Nine Hundred Nos.

ThirtyNine Paise Twenty Only

Rupees FiftyNine Thousand

178 1 Supply, Installation, Testing & Commissioning of PTZ Camera Controller Including all Accessories to install the equipment 59751.6 Seven Hundred FiftyOne Nos.

Paise Sixty Only

Rupees One Lakh SixtyThree

Supply, Installation, Testing and Commissioning of 3x1 Switching Encoder (Dual HDMI and USB-C) with Dual LAN Including all

179 1 163698.09 Thousand Six Hundred Nos.

Accessories to install the equipment.

NinetyEight Paise Nine Only

Rupees One Lakh Fifteen

Thousand Five Hundred

180 3 Supply, Installation, Testing and Commissioning of HDMI 2.0a Encoder Including all Accessories to install the equipment. 115551.35 Nos.

FiftyOne Paise ThirtyFive

Rupees One Lakh

Supply, Installation, Testing and Commissioning of HDMI 2.0 input Wall Plate Encoder with 2 x 1 Switching Including all Accessories SeventyEight Thousand One

to install the equipment. Hundred FourtyTwo Paise

Rupees One Lakh Fifteen

Thousand Five Hundred

182 7 Supply, Installation, Testing and Commissioning of HDMI 2.0a Decoder Including all Accessories to install the equipment. 115551.35 Nos.

FiftyOne Paise ThirtyFive

Rupees One Lakh TwentyFive

Supply, Installation, Testing and Commissioning of HDMI 2.0 output Decoder with, Dual 1G LAN Including all Accessories to install the

183 1 125180.98 Thousand One Hundred Nos.

Eighty Paise NinetyEight Only

Rupees Two Lakh FourtyEight

Supply, Installation, Testing and Commissioning of Management Software for management of Encoders and Decoders. Includes Thousand Seven Hundred

power supply and unlimited Encoder/Decoder licenses Including all Accessories to install the equipment. - TwentyFour Paise SixtyTwo

Supply, Installation, Testing & Commissioning of PC with dual HDMI outputs and 4 USB 3.0 ports, i7 processor, 16GB RAM, 2 TB SSD Rupees SixtyFive Thousand

along with mouse and keyboard, Builtin WiFi Including all Accessories to install the equipment. Two Hundred FourtySix Only

Estimated Rate With 1% Labour Cess

in Rs. (Excluding GST)

Quantity but Total Amount in

Quantity but Total Amount in

Item No. Description Unit

may be more or Rs.

In Figures In Words

Wireless Intercom System

Rupees One Lakh

186 1 Supply, Installation, Testing & Commissioning of Wireless Digital Intercom System comprising of the following: 171700 SeventyOne Thousand Seven Nos.

a) Digital body Pack Pocket Transmitter/ Receiver with Talk back System x 4 Hundred Only

Rupees One Lakh ThirtyTwo

CONTROL SYSTEM Supply, Installation, Testing & Commissioning of Network based AV Control System Including all Accessories to

187 1 132450.75 Thousand Four Hundred Fifty Nos

install the equipment

Paise SeventyFive Only

Rupees Fifteen Thousand

Supply, Installation, Testing & Commissioning of IP to IR Command Converter for Control System with Three Emitters Including all

188 7 15788.16 Seven Hundred EightyEight Nos

Accessories to install the equipment.

Paise Sixteen Only

Rupees FiftyEight Thousand

Supply, Installation, Testing & Commissioning of Wireless Touch Display with wireless Docking station cum charger Including all

189 1 58378 Three Hundred SeventyEight Nos

Accessories to install the equipment.

Rupees FiftyFour Thousand

Supply, Installation, testing & commissioning of 24-port PoE Network switch preconfigured for AVOIP, Audio, Video and Control

190 2 54944 Nine Hundred FourtyFour Nos

Including all Accessories to install the equipment.

Rupees Eleven Thousand Six

Supply, Installation, Testing & Commissioning of Wireless Access Point 802.11 a,b, g, n with POE, support Dual band 2.4GHz and

191 2 11675.6 Hundred SeventyFive Paise Nos

5GHz Including all Accessories to install the equipment.

Rupees Eighteen Thousand

192 2 Supply, Installation, Testing & Commissioning of IP to RS-232 Command Converter 18775.05 Seven Hundred SeventyFive Nos

Paise Five Only

Assistive Listening for People with Hearing Disabilities Rupees One Lakh Ninety

193 2 190930.4 Thousand Nine Hundred Nos

Supply, Installation, Testing & Commissioning of Class D Tech series: Loop driver for phased array systems Thirty Paise Fourty Only

Rupees TwentyThree

194 10 Supply, Installation, Testing & Commissioning of Hearing Loop listener 23684.3 Thousand Six Hundred Nos

EightyFour Paise Thirty Only

Rupees Four Hundred

195 1000 Supply, Installation, Testing & Commissioning of Copper foil 2.5sqmm Cable 473.89 SeventyThree Paise Meters

EightyNine Only

Rupees Four Hundred

196 200 Supply, Installation, Testing & Commissioning of Copper cable 2.5sqmm 477.33 SeventySeven Paise Meters

ThirtyThree Only

Stage Lighting & Furnishing

Rupees Thirty Thousand

197 13 Supply, Installation, Testing & Commissioning of 100W LED PARCAN Light, 3200K, 9°-30° Manually adjustable, manual / DMX 30769.33 Seven Hundred SixtyNine Nos

control, fully RDM compliant when in DMX mode, Light output @ 2 Mtr >35,000 lux at spot mode, Spun Aluminum housing with black Paise ThirtyThree Only

powder coated with matt finish.

Rupees ThirtyFive Thousand

Supply, Installation, Testing & Commissioning of 400W LED Blinder Light, 3200K, 40°, manual / DMX control, fully RDM compliant

198 8 35842.03 Eight Hundred FourtyTwo Nos

when in DMX mode, Light output @ 2 Mtr >8,000 lux, MS housing with black powder coated with matt finish.

Paise Three Only

Estimated Rate With 1% Labour Cess

in Rs. (Excluding GST)

Quantity but Total Amount in

Quantity but Total Amount in

Item No. Description Unit

may be more or Rs.

In Figures In Words

Rupees Twelve Thousand

Supply, Installation, Testing & Commissioning of 54 x 3W RGBW LED PAR Light, 15°, Manual / DMX control, fully RDM compliant

199 14 12572.56 Five Hundred SeventyTwo Nos

when in DMX mode, Light output @ 2 Mtr >10,000 lux, Die casted Aluminum housing with black powder coated with matt finish.

Paise FiftySix Only

Supply, Installation, Testing & Commissioning of 54 x 3W 3200K LED PAR Light, 15°, Manual / DMX control, CRI>90, fully RDM Rupees Twelve Thousand

200 8 compliant when in DMX mode, Light output @ 2 Mtr >7,500 lux, Die casted Aluminum housing with black powder coated with matt 12572.56 Five Hundred SeventyTwo Nos

finish. Paise FiftySix Only

Rupees SeventyFour

Supply, Installation, Testing & Commissioning of 200W LED Profile Light, 3200K, 19° beam angle, manual / DMX control, fully RDM Thousand Three Hundred

compliant when in DMX mode, Light output @ 2 Mtr >20,000 lux, PVC or Aluminium housing with black finish. TwentyNine Paise SixtyTwo

Supply, Installation, Testing & Commissioning of 150W LED Moving Head with beam effect, color wheel, Gobos, Prism, manual / Rupees FiftyTwo Thousand

202 2 DMX control, fully RDM compliant when in DMX mode, Light output @ 2 Mtr >60,000 lux at spot mode, Engineered plastic & alloy 52935.8 Nine Hundred ThirtyFive Nos

housing with black finish. Paise Eighty Only

Rupees One Thousand Six

Supply, Installation, Testing & Commissioning of Die cast Aluminium C - Clamp with safety chain duly epoxy polyester powder coated

203 49 1600.24 Hundred Paise TwentyFour Nos

in black matt texture finish and safe working load of 100kg.

Supply, Installation, Testing & Commissioning of Safety bond with lock clip 1.5 Mtr Long made with twisted pair of GI wire rope, 2mm Rupees Two Hundred

204 49 or 3mm Thickness with sleeve to be fixed around the grid to avoid fall of the material in case if the "C" clamp is not locked properly. 249.31 FourtyNine Paise ThirtyOne Nos

SWL 150Kgs. Only

Rupees Two Hundred

Supply, Installation, Testing & Commissioning of 79mm Round Identification name plate duly epoxy polyester powder coated in matt

205 49 221.15 TwentyOne Paise Fifteen Nos

texture finish.

Supply, Installation, Testing & Commissioning of MS C track of size 50 x 40 mm size with 3mm thickness or higher size, Self-weight Rupees Eight Hundred

206 145 3.3Kg per mtr. All the materials under gone through 7 tank process with various chemical treatment to keep them rust free with and 861.25 SixtyOne Paise TwentyFive Meters

duly epoxy polyester powder coated in black matt texture finish. Only

Rupees Two Thousand Two

207 25 Supply, Installation, Testing & Commissioning of Customized MS Suspenders. 2206.69 Hundred Six Paise SixtyNine Nos

Rupees Three Lakh Thirty

Supply, Installation, Testing & Commissioning of CE Certified Motorised Stage Light bar Suitable Length 12 Mtrs as per site Thousand Eight Hundred

requirements, Suitable Capacity 3 Phase AC Motor with DC Brake & Gear box with black epoxy polyester powder coated. FourtyTwo Paise FiftyFive

Rupees Three Lakh FiftyEight

Supply, Installation, Testing & Commissioning of CE Certified Motorised FOH Light bar Suitable Length 13 Mtrs as per site

209 1 358412.07 Thousand Four Hundred Nos

requiremnents, Suitable Capacity 3 Phase AC Motor with DC Brake & Gear box with black epoxy polyester powder coated.

Twelve Paise Seven Only

Rupees Three Lakh Thirty

Supply, Installation, Testing & Commissioning of Main Curtain track system 14.5 Mtrs long, center parting with overlap of 0.9mtr

Thousand Eight Hundred

210 1 arrangement undergone through various chemical treatment to keep them rust free and duly epoxy polyester powder coated in black 330842.55 Nos

FourtyTwo Paise FiftyFive

matt texture finish.

Supply, Installation, Testing & Commissioning of Main Valance Bar, length 14.5 Mtrs made using 40NB, 48mm OD construction Rupees ThirtySeven

211 1 arrangement 2mm Thickness undergone through various chemical treatment to keep them rust free and duly epoxy polyester powder 37298.05 Thousand Two Hundred Nos

coated in black matt texture finish with suitable suspenders. NinetyEight Paise Five Only

Estimated Rate With 1% Labour Cess

in Rs. (Excluding GST)

Quantity but Total Amount in

Quantity but Total Amount in

Item No. Description Unit

may be more or Rs.

In Figures In Words

Supply, Installation, Testing & Commissioning of Frill Bar, length 12 Mtrs made using 40NB, 48mm OD construction arrangement 2mm Rupees TwentyEight

212 2 Thickness undergone through various chemical treatment to keep them rust free and duly epoxy polyester powder coated in black 28956.17 Thousand Nine Hundred Nos

matt texture finish with suitable suspenders. FiftySix Paise Seventeen Only

Rupees TwentySeven

Supply, Installation, Testing & Commissioning of MS, Wing frame made out of 25X25mm or higher size made of MS square pipe with

Thousand Five Hundred

213 4 2mm in thickness undergone through various chemical treatment to keep them rust free and duly powder coated in black matt texture 27571.59 Nos

SeventyOne Paise FiftyNine

Rupees Sixteen Thousand

Supply, Installation, Testing & Commissioning of MS Side Lighting Ladder of suitable length and Width (Min 2400 mm Height &

214 2 16542.95 Five Hundred FourtyTwo Nos

Paise NinetyFive Only

Supply, Installation, Testing & Commissioning of MS Fabricated 4 way 10A, 250V A.C, IEC, Lighting Junction box made up of 22SWG Rupees Eight Hundred

215 12 CRCA for LED lighting fixtures with Pipe clamp arrangement for fixing on pipe grid or Raul plug arrangement for wall/floor fixing, duly 828.28 TwentyEight Paise Nos

black epoxy polyester powder coated texture finish. TwentyEight Only

Supply, Installation, Testing & Commissioning of MS Fabricated 2 way 10A, 250V A.C, IEC, Junction box made up of 22SWG CRCA Rupees Nine Hundred

216 3 with rocker switch to power up splitter and console with Pipe clamp on pipe grid arrangement for fixing or Raul plug arrangement for 938.86 ThirtyEight Paise EightySix Nos

wall/floor fixing, duly black epoxy polyester powder coated texture finish. Only

Supply, Installation, Testing & Commissioning of MS Fabricated 5 pin DMX Signal IN Junction box fitted with 5 pin DMX Male socket,

Rupees Seven Hundred Six

217 1 junction box made up of 22SWG CRCA, with Pipe clamp on pipe grid arrangement for fixing or Raul plug arrangement for wall/floor 706.72 Nos

Paise SeventyTwo Only

fixing, black epoxy polyester powder coated, duly black epoxy polyester powder coated texture finish.

Supply, Installation, Testing & Commissioning of MS Fabricated 5 pin DMX Signal OUT Junction box fitted with 5 pin DMX female

Rupees Seven Hundred Six

218 8 socket, junction box made up of 22SWG CRCA, with Pipe clamp on pipe grid arrangement for fixing or Raul plug arrangement for 706.72 Nos

Paise SeventyTwo Only

wall/floor fixing, black epoxy polyester powder coated, duly black epoxy polyester powder coated texture finish.

Supply, Installation, Testing & Commissioning of MS Fabricated 5 pin DMX Signal Loop Junction box fitted with 5 pin DMX Rupees Two Thousand

219 1 male/female socket, junction box made up of 22SWG CRCA, with Pipe clamp on pipe grid arrangement for fixing or Raul plug 2041.17 FourtyOne Paise Seventeen Nos

arrangement for wall/floor fixing, black epoxy polyester powder coated, duly black epoxy polyester powder coated texture finish. Only

Rupees FiftyFive Thousand

220 1 Supply, Installation, Testing & Commissioning of Well designed 12 Way Power Distribution Central Panel. 55141.11 One Hundred FourtyOne Nos

Paise Eleven Only

Rupees Seven Thousand One

Supply, Installation, Testing & Commissioning of Auxiliary marshalling box for power and signal cable termination in grid level and in

221 3 7168.82 Hundred SixtyEight Paise Nos

Motorised Light bar

Rupees One Thousand Three

222 5 Supply, Installation, Testing & Commissioning of Motor Cable Termination box for power cable termination at grid level. 1379.09 Hundred SeventyNine Paise Nos

Rupees One Lakh Ten

Supply, Installation, Testing & Commissioning of MS Fabricated Combined 4 Way Motor Control Center panel cum Remote Control Thousand Two Hundred

panel for Light bars and Curtain system EightyOne Paise FiftyFour

Rupees TwentySeven

Thousand Five Hundred

224 1 Supply, Installation, Testing & Commissioning of RDM Compatible DMX Splitter unit 27571.59 Nos

SeventyOne Paise FiftyNine

Estimated Rate With 1% Labour Cess

in Rs. (Excluding GST)

Quantity but Total Amount in

Quantity but Total Amount in

Item No. Description Unit

may be more or Rs.

In Figures In Words

Rupees One Lakh FourtyEight

Thousand Eight Hundred

225 1 Supply, Installation, Testing & Commissioning of 512 Channel, 2 Output Digital Lighting console 148879.7 Nos

SeventyNine Paise Seventy

Rupees Two Hundred

226 12 Supply, Installation, Testing & Commissioning of 5 pin XLR male / female connectors. 265.79 SixtyFive Paise SeventyNine Nos

Rupees Two Hundred

227 8 Supply, Installation, Testing & Commissioning of 5 Pin XLR Termination plug. 265.79 SixtyFive Paise SeventyNine Nos

Rupees SixtyNine Thousand

Supply, Installation, Testing & Commissioning of Main Valance Fabric

228 1 69476.69 Four Hundred SeventySix Nos

Size : L 14.5 x H 1.2 MTR

Paise SixtyNine Only

Rupees Two Lakh NinetyOne

Supply, Installation, Testing & Commissioning of Main Curtain Fabric Thousand One Hundred

Size : L 15.5 x H 5.5 MTR FourtyOne Paise ThirtyNine

Rupees One Lakh FourtyFive

Supply, Installation, Testing & Commissioning of Rear Curtain Fabric Thousand Five Hundred

Size : L 15.5 x H 5.5 MTR SeventyOne Paise ThirtyEight

Rupees TwentySeven

Supply, Installation, Testing & Commissioning of Frill Fabric

231 2 27790.68 Thousand Seven Hundred Nos

Size : L 12 x H 1.2 MTR

Ninety Paise SixtyEight Only

Rupees Nineteen Thousand

Supply, Installation, Testing & Commissioning of Wing Fabric

232 4 19410.34 Four Hundred Ten Paise Nos

Size : H 5.5 x W 3.1 MTR

ThirtyFour Only

Rupees Two Hundred

Supply, Installation, Testing & Commissioning of PVC Copper unarmoured flexible FRLS insulated multicore cable 1100V grade

233 50 232.14 ThirtyTwo Paise Fourteen Meters

confirming to IS694 size 7cx1.5 sq mm.

Supply, Installation, Testing & Commissioning of PVC Copper unarmoured flexible FRLS insulated multicore cable 1100V grade Rupees Three Hundred Nine

234 20 309.06 Meters

confirming to IS694 size 4cx4 sq mm. Paise Six Only

Supply, Installation, Testing & Commissioning of PVC Copper unarmoured flexible FRLS insulated multicore cable 1100V grade Rupees One Hundred Eleven

confirming to IS694 size 3cx1.5 sq mm. Paise TwentySix Only

Rupees One Hundred

Supply, Installation, Testing & Commissioning of FR Grade DMX Signal 4 core + Ground shielding Cable with CE mark for the Signal

236 200 144.23 FourtyFour Paise Meters

TwentyThree Only

Rupees Seven Hundred

237 100 Supply, Installation, Testing & Commissioning of MS perforated tray of Size 40 x 75 x 40mm & 1.6 mm Thickness. 717.71 Seventeen Paise SeventyOne Meters

Rupees One Thousand One

238 30 Supply, Installation, Testing & Commissioning of MS perforated tray of Size 40 x 150 x 40mm & 1.6 mm Thickness. 1103.69 Hundred Three Paise Meters

Estimated Rate With 1% Labour Cess

in Rs. (Excluding GST)

Quantity but Total Amount in

Quantity but Total Amount in

Item No. Description Unit

may be more or Rs.

In Figures In Words

Rupees Fifteen Thousand

239 1 Supply, Installation, Testing & Commissioning of Internal earthing copper bare conductor of size 14 SWG for power network. 15770.99 Seven Hundred Seventy Lot

Paise NinetyNine Only

Rupees ThirtyNine Thousand

Supply, Installation, Testing & Commissioning of Installation hardware’s such as clamps, connectors, glands, lugs, ferrules, welding

240 1 39426.44 Four Hundred TwentySix Lot

rods and miscellaneous items required during installation work.

Paise FourtyFour Only

Installation Equipment

Supply, Installation, Testing & Commissioning of AV Cables like 2 x 2.5 sqmm/ 2 x 4/ 6 Sqmm speaker cables, Co-axial Cable - 50 Rupees Twenty Lakh

241 1 ohms RF cable, 20/ 22 AWG Microphone Cables, CAT6 Cables, HDMI, USB-C Cables including all connectors & accessories for all 2053532 FiftyThree Thousand Five Lot

the equipments, AV Racks duly prewired and containment for complete audio, video & lighting system connectivity for Seminar Hall as Hundred ThirtyTwo Only

required to complete the system and installation testing commissioning and programming for the complete system as per international

and national standards.

Lighting System

Rupees Five Thousand One

Supply, Installation, Testing & Commissioning of Recess mounted adjustable fixture made of die cast aluminium with shinland Hundred FiftyOne Only

reflector Light Source: LED Wattage: 30W, Color Temperature 3000K, with Dimmable driver.

Rupees One Thousand Four

Supply, Installation, Testing & Commissioning of LED Strip with Aluminium channel and high quality milky or clear acryllic cover.

243 190 1442.28 Hundred FourtyTwo Paise Meters

Wattage - 10w/ Mtr LED, Color Temperature 3000K

TwentyEight Only

Rupees One Thousand Seven

244 19 Supply, Installation, Testing & Commissioning of Non Dimmable Driver for LED Strip. 1717 Nos.

Hundred Seventeen Only

Rupees One Thousand Three

245 140 Supply, Installation, Testing & Commissioning of Step Light, 4W LED, Color Temperature 3000 K. 1373.6 Hundred SeventyThree Paise Nos.

Rupees One Lakh

Lighting Control System

SeventyNine Thousand Nine

Hundred FourtyOne Paise

Supply, Installation, Testing & Commissioning of DIN Rail 0-10V Dimmer Module, 4feeds, 4 channels with 18 Watt Power Supply.

Installation Equipment

Rupees EightyOne Thousand

247 1 Supply, Installation, Testing & Commissioning of Power Cable 2.5 Sqmm x 3 core (80/0.20mm) ATC copper Conductor, 1.5 Sqmm x 2 81042.4 Lot

FourtyTwo Paise Fourty Only

core shielded Cable for Control, and other related cables, accessories and containment for Sports & Recreation as required. All

drawings, Cable Samples to be installed after approval of AV Consultant.

Providing, supplying, and placing outdoor seating furniture set comprising single seater sofa, three seater sofa, center table, and side

table, complete in all respects. The sofas shall be constructed with an aluminium frame finished with outdoor-grade powder coating

and polyester round rope woven detailing. Seating shall be provided with approximately 80 mm thick seat cushions and soft back Rupees One Lakh ThirtyTwo

248 1 cushions, using normal foam for seat cushions and PP foam for back cushions, along with five decorative pillows of approximately 450 132704.18 Thousand Seven Hundred SET

× 450 mm size. Upholstery fabric shall be water-repellent and suitable for outdoor use. The center table and side table shall be Four Paise Eighteen Only

provided with sintered stone top in grey tone, suitable for exterior application. The rate shall include all materials, fabrication,

cushions, pillows, finishing, loading, transportation, placing at site, and completion as per directions of the Engineer-in-Charge.

Estimated Rate With 1% Labour Cess

in Rs. (Excluding GST)

Quantity but Total Amount in

Quantity but Total Amount in

Item No. Description Unit

may be more or Rs.

In Figures In Words

Providing and fixing partition upto true ceiling height consisting of G.I. frame and required board, including providing and fixing of

frame work made of special section power pressed/ roll form G.I. sheet with zinc coating of 120 gms/sqm(both side inclusive),

consisting of floor and ceiling channel 50 mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at

the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal

screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed

vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts,

including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at Rupees One Thousand Two

249 768.10 spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and 1240.36 Hundred Fourty Paise sqm

ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid ThirtySix Only

through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal

joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with

recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of

primer suitable for board as per manufacture's specification and direction of engineer in charge all complete.

75 mm overall thickness partition with 12.5 mm thick double skin fire rated Glass Reinforced Gypsum (GRG) plaster board conforming

to IS: 2095: part 3 (Board with BIS certification marks)

Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on undecorated wall surface to give an even Rupees One Hundred Three

shade including throughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth. Paise Two Only

CENTER TABLE SIZE:-1800 x 1800 & 450mm height

Providing fixing and arrenging Center Table Providing and supply Top 20 mm thick made of PLY with 6 to8 mm thick natural veneer on

Rupees Seventeen Thousand

all sides front and back with double coat PU polish as per client's selection, bottom surface to be finished with 1mm thick laminate of

251 1 17513.4 Five Hundred Thirteen Paise Nos.

approved shade with 2 mm thick PVC edge bidding matching with same veneer finish.

STRUCTURAL SUPPORT SYSTEM:- shall be constructed using 40 x 20 mm matt finish S.S. Metal fame legs as per image. Entire

table to be finished with all necessary hardware and selection of material as per architect.

Rupees Three Hundred

Providing and applying texture interior paint finish to internal walls, including surface preparation (cleaning, putty/primer where

252 100 353.49 FiftyThree Paise FourtyNine sqm

required) and two coats of approved texture paint of specified shade.

Providing, fabricating, supplying and fixing free-standing podium (lectern) of approximate height 4 feet, made using particle board

panels over suitable internal framework, finished neatly on all exposed surfaces. Podium shall be suitable for auditorium use, without Rupees TwentyFour

wheels, and provided with an inclined top reading surface. Colour and finish as approved by Engineer-in-Charge. Item shall be made Thousand ThirtyEight Only

in India, complete in all respects including materials, labour, transportation and installation.

Point wiring for secondary light point with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (green) both are of ISI marked 1.1 KV grade FRLS

PVC insulated multi strand copper wires, in below type of pipe to be erected complete with earth continuity and necessary connection

with primary light with accessories erected on Metal / PVC / wooden box covered with 3 mm thick PC(Polycarbonate) / Acrylic sheet Rupees One Hundred

for open / concealed wiring. with necessary Lamp holder / ceiling rose / H.D.Connector as directed. Fourteen Paise One Only

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete

Estimated Rate With 1% Labour Cess

in Rs. (Excluding GST)

Quantity but Total Amount in

Quantity but Total Amount in

Item No. Description Unit

may be more or Rs.

In Figures In Words

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires up to 10 mtr length , in below type of pipe erected with 6A Modular type switch / bell push &

accessories and earth continuity of following type, erected on PVC / Metallic/Wooden box, single mounting base frame covered with

Rupees Three Hundred Thirty

255 25 textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe erected, with necessary Lamp holder/ceiling rose / 330.35 Pt.

Paise ThirtyFive Only

H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete(cat lll)

Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (green) both are of .ISI marked 1.1 KV

grade FRLS PVC insulated multi strand copper wires erected in below type of pipe with 6A Modular type switches and following type

of accessories erected on PVC / Metallic/Wooden box, single mounting base frame covered with textured / metallic/white front plate

Rupees Four Hundred Ten

256 30 modules erected on / in wall / ceiling as per pipe erected. with necessary batten/angle holder or ceiling rose or H.D.Connector as 410.71 Pt.

Paise SeventyOne Only

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete(cat III)

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi

strand copper wires up to 10 mtr length, in below type of pipe erected complete with Modular type switch & 5 pin Plug erected on

PVC / Metallic/Wooden box covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected with Rupees Three Hundred

257 10 following type of accessories. 323.48 TwentyThree Paise Pt.

FourtyEight Only

[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from nearby switchboard/mcb db board

(a) with medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling complete (cat III)

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi

strand copper wires up to 10 mtr length, in below type of pipe erected complete with Modular type switch & 5 pin Plug erected on

PVC / Metallic/Wooden box covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected with Rupees Four Hundred

258 85 following type of accessories. 483.51 EightyThree Paise FiftyOne Pt.

[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire from mcb db board.

(a) with medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling complete(cat III)

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi

strand copper wires up to 10 mtr length, in below type of pipe erected complete with Modular type switch & 5 pin Plug erected on

PVC / Metallic/Wooden box covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected with

following type of accessories. Rupees Five Hundred

SixtyNine Paise ThirtySix Only

[III] For 16A Plug and 16 amp switch with 2-4 sq.mm Cu. Wire with 2.5 sq.mm ( green) earthing wire from mcb d b board.

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete (cat III)

Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box, single mounting base frame covered

with textured / metallic/white front plate , modules erected with necessary connections as per site situation directed by Engineer In

charge. Rupees One Hundred Three

(1)One No. SP 6 Amp.Cat.III

Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box, single mounting base frame covered

with textured / metallic/white front plate , modules erected with necessary connections as per site situation directed by Engineer In

charge. Rupees One Hundred Three

(2) One No 5 pin plug.Cat.III

Estimated Rate With 1% Labour Cess

in Rs. (Excluding GST)

Quantity but Total Amount in

Quantity but Total Amount in

Item No. Description Unit

may be more or Rs.

In Figures In Words

Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box, single mounting base frame covered

with textured / metallic/white front plate , modules erected with necessary connections as per site situation directed by Engineer In

charge. Rupees One Hundred

262 20 135.99 ThirtyFive Paise NinetyNine Ea.

(10) 6/16Amp. Universal socket (cat III)

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/in wall or ceiling erected

with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in approved manner

as directed Rupees TwentyTwo Paise

Providing & Erecting eight module pop up floor box/flushed with table surface Conform to IEC 60670-1, IEC 60670-23 & IEC 60884-1 Rupees One Thousand Fifty

with required items as demanded by engineer in charge with complete finishing .cat-III Paise Twelve Only

Supply & installation of modular type accessories for U PVC snap-on adaptable trunking/Pop up Box with required items erected

with necessary connection. As desired by Engineer In charge

cat. III Rupees One Hundred Fourty

Paise Eleven Only

i) 6 A SP 1 Way Switch

Supply & installation of modular type accessories for U PVC snap-on adaptable trunking/Pop up Box with required items erected

with necessary connection. As desired by Engineer In charge

cat. III Rupees Two Hundred

FourtyOne Paise Seven Only

ii) 16 A SP 1 Way Switch

Supply & installation of modular type accessories for U PVC snap-on adaptable trunking/Pop up Box with required items erected

with necessary connection. As desired by Engineer In charge Rupees Two Hundred

267 23 cat. III 238.32 ThirtyEight Paise ThirtyTwo Ea.

iv) 6A universal socket shuttered

Supply & installation of modular type accessories for U PVC snap-on adaptable trunking/Pop up Box with required items erected

with necessary connection. As desired by Engineer In charge

cat. III Rupees Three Hundred

Fourteen Paise FiftyFive Only

iv) 6/16 A universal socket shuttered

Supply & installation of modular type accessories for U PVC snap-on adaptable trunking/Pop up Box with required items erected

with necessary connection. As desired by Engineer In charge Rupees One Hundred

269 110 cat. III 167.58 SixtySeven Paise FiftyEight Ea.

v) RJ-11 Telephone socket

Supply & installation of modular type accessories for U PVC snap-on adaptable trunking/Pop up Box with required items erected

with necessary connection. As desired by Engineer In charge Rupees Three Hundred

270 10 cat. III 385.29 EightyFive Paise TwentyNine Ea.

vi) Cat-6 LAN Socket

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of

pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of

Rupees FourtyTwo Paise

271 50 green colour for earth continuity of following size 42.58 Mtr.

FiftyEight Only

(A) With medium class Rigid PVC pipe and accessories

(a) 2 wire 1.5 sq. mm

Estimated Rate With 1% Labour Cess

in Rs. (Excluding GST)

Quantity but Total Amount in

Quantity but Total Amount in

Item No. Description Unit

may be more or Rs.

In Figures In Words

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of

pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of

green colour for earth continuity of following size Rupees FiftySix Paise

(A) With medium class Rigid PVC pipe and accessories

(b) 2 wire 2.5 sq. mm

Cafeteria Mural Wall: 13.35m x 3.15m

Rupees Eight Thousand Eight

Providing and fixing 12 mm thick HDHMR board to wall, screw-fixed on suitable framework / directly to wall as required, including all

273 42 8867.96 Hundred SixtySeven Paise sqm

necessary fasteners, anchors, jointing, edge finishing, and surface preparation. Finished with approved concrete-finish colour paint,

including primer, putty, sanding, and required number of coats, complete in all respects as per design, drawings, and specifications.

CONFERENCE SYSTEM

Supply, Installation, Testing and Commissioning of Central Conference Control Unit. Dynamic range : 110 dB A-weighted, Signal-to- Rupees One Lakh FourtyOne

274 2 noise Ratio: 90 dB, A-weighted, Inputs : 2 Mic/Line In, 2 Aux In, 2 x Interpretaion Return, Outputs : 4 balanced outputs, 1 unbalanced 141651.64 Thousand Six Hundred Nos

output. Complete as per tender specification. FiftyOne Paise SixtyFour Only

Rupees FourtyEight

Supply, Installation, Testing and Commissioning of Digital Audio Conference Integration Unit. Dynamic Range: 105dB-A, Frequency Thousand One Hundred

Response: 20Hz-20kHz. Complete as per tender specification. SixtyOne Paise EightyFive

Rupees FourtySeven

Supply, Installation, Testing and Commissioning of 5 pin Flush mount Chairman Microphone with RGB LED Ring along with Logic

Thousand Seven Hundred

276 4 switch With addition of Priority / Clear Button. Frequency Response : 30 - 20,000 Hz, Open Circuit Sensitivity: -40 dB (10.0 mV) re 1V 47786.69 Nos

EightySix Paise SixtyNine

at 1 Pa, Maximum Input Sound Level: 140 dB SPL, Dynamic Range:112 dB. Complete as per tender specification.

Supply, Installation, Testing and Commissioning of 5 pin Flush mount Delegate Microphone with RGB LED Ring along with Logic Rupees FourtyThree

277 50 switch. Frequency Response : 30 - 20,000 Hz, Open Circuit Sensitivity: -40 dB (10.0 mV) re 1V at 1 Pa, Maximum Input Sound Level: 43064.94 Thousand SixtyFour Paise Nos

140 dB SPL, Dynamic Range:112 dB. Complete as per tender specification. NinetyFour Only

Rupees One Thousand One

Supply, Installation, Testing and Commissioning of HDBaseT-Certified Cat.6a Patch Cable – 2.00m, black. Complete as per tender

278 54 1178.72 Hundred SeventyEight Paise Nos

SeventyTwo Only

Rupees Three Thousand One

Supply, Installation, Testing and Commissioning of FHDBaseT-Certified Cat.6a Patch Cable – 10.0m, black. Complete as per tender

279 2 3129.23 Hundred TwentyNine Paise Nos

TwentyThree Only

Supply, Installation, Testing and Commissioning of Type-2: 4.5" Two Way, Full Range, 50 Watts Coaxial passive Ceiling Rupees TwentyFive

280 18 Loudspeaker. Nominal impedance: 8 Ohm, Frequency Range : 90 Hz-20 kHz, Sensitivity: 90dB or better, Max Peak SPL: 113dB or 25466.54 Thousand Four Hundred Nos

better. Complete as per tender specification. SixtySix Paise FiftyFour Only

Rupees One Lakh FourtyTwo

Supply, Installation, Testing and Commissioning of 400-W Two Channel Multi Impedance Class-D Power Share Amplifier. 200W per Thousand Seven Hundred

channel @ 4Ω, 8Ω, 70.7V, 100V, Frequency Response: 20Hz - 20kHz. Complete as per tender specification. NinetyOne Paise

SeventyThree Only

Estimated Rate With 1% Labour Cess

in Rs. (Excluding GST)

Quantity but Total Amount in

Quantity but Total Amount in

Item No. Description Unit

may be more or Rs.

In Figures In Words

Rupees Three Lakh Eleven

Supply, Installation, Testing and Commissioning of Ceiling tile microphone (For VC) having 32 microphone capsules with minimum

Thousand Six Hundred

282 2 simultaneous beam combination of Dynamic / Static style. Frequency Response : 60 Hz to 18,000 Hz, Maximum Input Sound Level : 311634.64 Nos

ThirtyFour Paise SixtyFour

102 dBSPL, Dynamic Range : 89 dB. Complete as per tender specification.

Rupees Four Lakh TwentySix

Supply, Installation, Testing and Commissioning of 8 x 8 DSP Processor with DANTE. Frequency Response: 20 Hz - 20 kHz, +/- 0.5 Thousand Six Hundred

dB, Dynamic Range: > 113 dB, THD+Noise: <-95 dB. Complete as per tender specification. FiftyFour Paise SeventyFive

Rupees Two Lakh Seventy

Supply, Installation, Testing and Commissioning of Dual Channel Digital Wireless Receiver system with DANTE. Complete as per Thousand Four Hundred

tender specification. TwentyTwo Paise ThirtyFive

Rupees SixtyEight Thousand

Supply, Installation, Testing and Commissioning of Digital Wireless Handheld Microphone with Dynamic Cardioid Capsule. Complete

285 8 68447.35 Four Hundred FourtySeven Nos

as per tender specification.

Paise ThirtyFive Only

Rupees ThirtyEight Thousand

286 5 Supply, Installation, Testing and Commissioning of Networked Two-Bay Charging Station. Complete as per tender specification. 38247.03 Two Hundred FourtySeven Nos

Paise Three Only

Rupees One Lakh FiftyFive

Supply, Installation, Testing and Commissioning of Type-3: Full Range Line Array Speaker System with Minimum 15 Nos Full range

Thousand Two Hundred

287 4 Drivers. Nominal Impedance: 6Ω-8Ω, Input Sensitivity at 1W/1m: 96 dB or better, Maximum Peak SPL: 123 dB or better, Frequency 155247.71 Nos

FourtySeven Paise

Range (-10 dB) : 90Hz - 20kHz. Complete as per tender specification. (Audio for Video)

SeventyOne Only

Rupees One Lakh

Supply, Installation, Testing and Commissioning of 800-W Two Channel Multi Impedance Class-D Power Share Amplifier. 400W per EightySeven Thousand Eight

channel @ 4Ω, 8Ω, 70.7V, 100V, Frequency Response: 20Hz - 20kHz. Complete as per tender specification. Hundred ThirtyOne Paise

Rupees Six Lakh NinetyEight

Supply, Installation, Testing and Commissioning of 12 x 8 Fixed /Chassis based DSP Processor with AEC & DANTE. Frequency Thousand Two Hundred

Response: 20 Hz - 20 kHz, +/- 0.5 dB, Dynamic Range: > 114 dB, THD+Noise:< -95 dB. Complete as per tender specification. SeventyEight Paise Fifteen

Supply, Installation, Testing & Commissioning of 1-Chip DLP Laser Projector with interchangeable ultra-short throw lens having

Rupees Seventeen Lakh

minimum throw ratio up to 0.38:1, brightness minimum 7,500 ANSI Lumens, 3D compatible, True 4K UHD resolution (3840 × 2160),

FourtyFour Thousand Two

290 3 contrast ratio minimum 1,800:1 (dynamic contrast preferred), laser illumination life minimum 20,000 hours, aspect ratio 16:9 / 16:10 1744255.66 Nos

Hundred FiftyFive Paise

selectable, inputs including HDMI and HDBaseT, complete with suitable ceiling / wall mounting bracket, and all required accessories,

hardware, power and signal cabling, including installation, alignment, testing and commissioning complete as per site requirement.

Supply, Installation, Testing & Commissioning of Low Noise Motorized Professional Projection Screen with matt white fabric of size Rupees Two Lakh Twelve

291 2 1.6 Meter(H) x 2.8 Meter(W) with black drop as required with IR remote and relay for automation operation. Including all Accessories 212903.71 Thousand Nine Hundred Nos

to install the equipment. Three Paise SeventyOne Only

Supply, Installation, Testing & Commissioning of MS Ceiling Mount (Heavy Duty) Fabricated MS ceiling mount, Powder-coated finish, Rupees Eleven Thousand

292 3 Adjustable height Load capacity suitable for professional projectors (15–25 kg), Includes mounting hardware. Including all Accessories 11332.2 Three Hundred ThirtyTwo Nos

to install the equipment. Paise Twenty Only

Estimated Rate With 1% Labour Cess

in Rs. (Excluding GST)

Quantity but Total Amount in

Quantity but Total Amount in

Item No. Description Unit

may be more or Rs.

In Figures In Words

Rupees ThirtyThree

Supply, Installation, Testing and Commissioning of Cable Cubby with pass through for HDMI, USB-C-USB-C, USB2.0, Data Port,

293 12 33052.25 Thousand FiftyTwo Paise Nos

Power Socket. Complete as per tender specification.

TwentyFive Only

Supply, Installation, Testing and Commissioning of LED Display Size- 65" 4K Ultra HD Display, Brightness- 500 nits, industrial grade Rupees Two Lakh Fourteen

with Metal Frame Design, Contrast Ratio- 5000:1, Operating Hour- 24/7, Input- Display Port 1.2 (1), HDMI 2.0 (3), RJ45- IN & OUT Thousand Three Hundred

(2), RS232- IN & OUT (2), Mounting : ADA complied OEM mount from same LED Display manufacturer, Accessories, Cables Etc : All SixtySeven Paise FourtyFive

cables, accessories, Mounting Kits. Complete as per tender specification. Only

Rupees One Lakh NinetyTwo

Supply, Installation, Testing and Commissioning of POE Enabled PTZ camera 20x Zoom 4K & 30x Zoom Full HD output. Complete

295 7 192764.16 Thousand Seven Hundred Nos

with Wall Mounting arrangements. Complete as per tender specification.

SixtyFour Paise Sixteen Only

Rupees Eighteen Thousand

Supply, Installation, Testing and Commissioning of HDMI to USB 3.2 Gen 1 Video Capture Tool with Loop-Out. Complete as per

296 3 18486.94 Four Hundred EightySix Paise Nos

tender specification.

NinetyFour Only

Rupees One Lakh Eight

297 3 Supply, Installation, Testing and Commissioning of Wireless Presenter module. Complete as per tender specification. 108600.25 Thousand Six Hundred Paise Nos

TwentyFive Only

Rupees Five Lakh Four

Supply, Installation, Testing and Commissioning of 3x1 Switching Encoder (Dual HDMI and USB-C) with Dual LAN & Integrated

298 8 500483.18 Hundred EightyThree Paise Nos

Management. Complete as per tender specification.

Rupees Two Lakh TwentyTwo

Thousand Four Hundred

299 10 Supply, Installation, Testing and Commissioning of HDMI 2.0a Encoder with HDMI Loop out. Complete as per tender specification. 222435.63 Nos

ThirtyFive Paise SixtyThree

Rupees Two Lakh Fourty

Supply, Installation, Testing and Commissioning of HDMI 2.0 output Decoder with , Dual 1G LAN. Complete as per tender Thousand Nine Hundred

specification. SeventyThree Paise

Rupees One Lakh ThirtyTwo

Supply, Installation, Testing and Commissioning of Admin CPU with 16GB RAM, SSD Hardware, built-in WIndow10 or better operating

301 4 132209 Thousand Two Hundred Nine Nos

system. Complete with 21" Monitor.

Supply, Installation, Testing and Commissioning of an All-in-one 98" Interactive Flat Panel Display with 450 nits or higher brightness,

minimum 40 touch points, 8 GB RAM and minimum 128 GB internal storage, powered by latest Android 13.0 OS, having front-facing

Rupees Five Lakh NinetyFour

15 W × 2 speakers with dedicated 20 W sub-woofer, NFC-based enhanced security, in-built dedicated Hotkeys for quick functions,

302 3 594940.5 Thousand Nine Hundred Nos

integrated 8 MP camera with 8-array microphone, Wi-Fi 6 and embedded Bluetooth, supplied with dual smart pens with magnetic pen

Fourty Paise Fifty Only

tray, multiple USB ports (minimum 3 nos), HDMI ports (minimum 3 nos), dual RJ45 LAN ports, OPS slot, anti-glare tempered glass,

complete including all accessories required for wall mounting and installation.

Supply, Installation, Testing and Commissioning of All-in-one 75" Interactive Flat Panel Display with minimum 450 nits brightness, at

Rupees Three Lakh

least 40 simultaneous touch points, 8 GB RAM with minimum 128 GB internal storage, equipped with Android 13.0 OS, front-mounted

ThirtyFour Thousand Two

303 1 15 W × 2 speakers along with 20 W sub-woofer, NFC-enabled security, in-built Hotkeys for quick access, integrated 8 MP camera and 334299.9 Nos

Hundred NinetyNine Paise

8-mic array, Wi-Fi 6 and Bluetooth support, supplied with dual smart pens, magnetic pen tray, minimum 3 USB ports, 3 HDMI ports

and dual LAN ports, OPS ready, anti-glare tempered glass, including mounting hardware and all installation accessories.

Estimated Rate With 1% Labour Cess

in Rs. (Excluding GST)

Quantity but Total Amount in

Quantity but Total Amount in

Item No. Description Unit

may be more or Rs.

In Figures In Words

Supply, Installation, Testing and Commissioning of LED Display Size- 75" 4K Ultra HD Display, Brightness- 500 nits, industrial grade Rupees Three Lakh

with Metal Frame Design, Contrast Ratio- 5000:1, Operating Hour- 24/7, Input- Display Port 1.2 (1), HDMI 2.0 (3), RJ45- IN & OUT SeventyTwo Thousand Four

(2), RS232- IN & OUT (2), Mounting : ADA complied OEM mount from same LED Display manufacturer, Accessories, Cables Etc. : All Hundred Four Paise

cables, accessories, Mounting Kits. Complete as per tender specification. FourtyTwo Only

Supply, Installation, Testing and Commissioning of SMATV Receiver (Include Dish Antenna, HD SET TOP Box, Remote, 30 Mtr wire Rupees Seven Thousand

to connect set up box and Dish Antenna and other accessories as per Direction of in charge) Only

Supply, Installation, Testing and Commissioning of All-in-one 86" Interactive Flat Panel Display with 450 nits or higher brightness,

minimum 40 touch points, 8 GB RAM and minimum 128 GB internal storage, running on Android 13.0 operating system, featuring front- Rupees Four Lakh Thirty

306 1 facing 15 W × 2 speakers with 20 W sub-woofer, NFC security, dedicated physical Hotkeys, integrated 8 MP camera and 8-array 430623.6 Thousand Six Hundred Nos

microphone, Wi-Fi 6 with embedded Bluetooth, dual smart pens with magnetic holder, multiple USB (minimum 3), HDMI (minimum 3), TwentyThree Paise Sixty Only

dual RJ45 ports, OPS compatibility, anti-glare hardened glass, inclusive of all accessories for complete installation.

Supply, Installation, Testing and Commissioning of LED Display Size- 55" 4K Ultra HD Display, Brightness- 500 nits, industrial grade

Rupees One Lakh FourtyEight

with Metal Frame Design, Contrast Ratio- 5000:1, Operating Hour- 24/7, Input- Display Port 1.2 (1), HDMI 2.0 (3), RJ45- IN & OUT

307 1 148026.86 Thousand TwentySix Paise Nos

(2), RS232- IN & OUT (2), Mounting : ADA complied OEM mount from same LED Display manufacturer, Accessories, Cables Etc. : All

cables, accessories, Mounting Kits. Complete as per tender specification.

Supply, Installation, Testing & Commissioning of Low Noise Motorized Professional Projection Screen with matt white fabric of size Rupees Five Lakh FourtyOne

308 1 2.56 Meter(H) x 4.45 Meter(W) with black drop as required with IR remote and relay for automation operation. Including all 541358.08 Thousand Three Hundred Nos

Accessories to install the equipment. FiftyEight Paise Eight Only

Rupees FiftyOne Thousand

Supply, Installation, Testing and Commissioning of Portable Trolley - Heavy Duty portable trolly for above monitor display, adjustable

309 2 51939.25 Nine Hundred ThirtyNine Nos

height, tilt movement upto 15-degree movement wheels with brake facility Including all Accessories to install the equipment-

Paise TwentyFive Only

Rupees Three Lakh

Supply, Installation, Testing and Commissioning of Management Software for management of Encoders and Decoders. Includes FourtyOne Thousand Nine