Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹32.3 L
EMD Value
₹32,291
Closing Date
1 Jul 2023, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
NBCC Bhawan
NBCC Bhawan
Civil and Interior, Modular Kitchen, Electrical, Painting, Plumbing etc.
NSL/CEO/SIDBI/NIT/2023/583~EW4b2f0abedc64e83dd65bd2a9
NSL/CEO/SIDBI/NIT/2023/583
Open Tender-Domestic
Miscellaneous
NBCC Bhawan
₹2,950
₹32,291
1 Jul 2023
23 Jun 2023
1 Jul 2023
23 Jun 2023
1 Jul 2023
4 Grand Total Including GST 3229002.00
Providing and laying brick work in half brick thickness with best
quality locally available bricks in cement mortar 1:4 (1 cement: 4
coarse sand) including raking out the joints, curing, necessary
scaffolding and providing and placing two nos. of 6 mm dia. M.S. bars
4 longitudinally in every 4th layer etc. all complete at all level and Sqm 30.00 1003.00 30090.00
height all as directed
by the Engineer In charge.
Carefully removing the existing plaster of ceiling up to existing R.C.C.
surface and walls including dado/cement punning or any other finish
over plaster etc., up to brick work surface or as required at site including
cutting the patch in proper shape etc. all complete as directed by the
Bank’s Engineer-in-Charge. The quoted rates shall also be inclusive of
cost of scaffolding & removal of all debris
Digitally signed by AMIT
Estimate for Renovation & Interior fit out works for SIDBI guest house at Coimbatore
S.No. Description of item Unit Qty Rate Amount
Providing and applying internal plaster to ceiling & walls in CM of
desired p oportions at all heights & levels with all leads & lifts
matching to the surroundings including scaffolding, curing & site
cleaning etc., all complete as directed by the Engineer- In-Charge.
(a) 08 mm thick (avg.) plaster in cement mortar 1:3 (1 cement: 3 fine
a sand) to ceiling. Sqm 86.00 354.00 30444.00
(b)15 mm thick single coat plaster in cement mortar 1:4 (1 Cement: 4
b fine sand) to wall surfaces. Sqm 30.00 354.00 10620.00
Providing and laying 300mm x 300mm, 1st quality ceramic tiles in
flooring of approved shade and make in bath room etc. over a base in
20mm thick (average) in cement mortar 1:4 (1 cement: 4 coarse sand) in
7 proper line, level & slope including curing& cleaning etc. all complete as Sqm 18.00 1416.00 25488.00
required at site as directed by the Engineer In charge
Providing and fixing 1 quality ceramic tiles dado of required height on
walls with 300mm x 600mm, 1st quality ceramic tiles of approved make
8 and shade with backing plaster of 12mm thick in CM 1: 3 (1 cement: 3 Sqm 40.00 1593.00 63720.00
coarse sand) in proper line and level
Providing and laying 1 quality polished vitrified floor tiles of size 600mm x
600mm of approved make & shade laid in floor with 20mm thick or more
bed mortar in CM 1:4 (1 grey cement : 4 coarse sand) and cement
9 slurry/ paste in backing of tiles laid in proper line and level & slope as Sqm 100.00 1770.00 177000.00
required at site as directed by the Engineer-In-Charge.
Digitally signed by AMIT
Estimate for Renovation & Interior fit out works for SIDBI guest house at Coimbatore
S.No. Description of item Unit Qty Rate Amount
Providing and fixing 100mm high skirting made from 1 quality polished
vitrified tiles of approved make & shade with base in 12mm thick in
10 CM 1:4 (1 cement: 4 coarse sand) with cement slurry paste in backing of Rmt 80.00 177.00 14160.00
tiles laid in proper line and level etc as directed by the Engineer-in-
Providing ,making and fixing WPC chowkhat /frame of required section
11 approx.100 x50 mm with required holdfast ,hardware etc all No. 6.00 8850.00 53100.00
Supplying and fixing 30 mm thick flush door of approx. size 80x30 inch
with required screw etc. and finishing of same with 1.0 mm
12 laminate of approve shade on both side with ss hinges etc. all complete No. 6.00 10030.00 60180.00
Carefully removing of enamel paint from both side of flush door with
paint remover and sandpapering of same to give smooth finish. S/F
1.0 mm thick laminate of approve shade and make on both faces of
shutter in required size including providing and fixing Smm thick teak
13 wood lipping around the periphery of the shutter etc.complete all as No. 6.00 7080.00 42480.00
directed by the Engineer-in-Charge.
Rate shall includes 4nos, 125mm long heavy quality S.S. butt hinges to
each single leaf shutter .
Supplying and fixing in position the following heavy quality hard ware
fittings & fixtures of approved quality/brand for door/cupboard
shutters including removing of old fittings & fixtures, making grooves,
14 cuttings, necessary screws, bolts, nuts, washers etc. all complete as
required at site as directed by the Engineer- in-Charge.Note:All the
fittings & fixtures shall be got approved, prior to start of the
a (i) 300mm ss aldrop Each 1.00 885.00 885.00
b ii)S.S mortice lock set with handle of approve design Each 6.00 2950.00 17700.00
c (iii)125 /100mm grip length long ss handle Each 10.00 118.00 1180.00
Digitally signed by AMIT
Estimate for Renovation & Interior fit out works for SIDBI guest house at Coimbatore
S.No. Description of item Unit Qty Rate Amount
d (iv) 250 mm. long ss tower bolts. Each 6.00 236.00 1416.00
e (vi) 150mm long ss tower bolts. Each 10.00 94.40 944.00
f (ix) Approved quality door magic eye. Each 1.00 236.00 236.00
g (x) Approved quality Hard buffer Rubber stopper for doors. Each 6.00 88.50 531.00
h (xi) Heavy quality SS door stpper. Each 6.00 177.00 1062.00
i (xii) Sliding almirah lock Each 3.00 885.00 2655.00
Providing and applying waterproof treatment to the sunken portion by
applying with roller or brush a first coat on the mother slab and up to
the 300mm height on walls (i.e. above the finished floor level) after
15 cleaning the surface free from dust, dirt and loose material and allow Sqm 30.00 590.00 17700.00
to dry the surface for 4-6 hours.
Providing & fixing in existing W.C./Bath window opening a powder
coated aluminum frame work in tubular section of size 63mm x38mm
with 16 gauge thick as per the approved design in two parts as
required to fix exhaust fan in upper portion and glass shutter in lower
16 portion with ss mosquito net jail in lower portion from outside. No. 3.00 4130.00 12390.00
complete as required at site as directed by the Engineer-in-charge.
Approx 33v21 inch
providing & fixing laminated wooden wardrobe of approve design
with sliding shutter. The cupboard is made up of 18mm HDHMR
board on all sides , shelves,shutter , vertical partition and
laminated with .8 mm laminate of white colour on all internal faces and
1.0mm laminate on outer exposed faces. . Back of wardrobe is
finished wih 8mm prelaminated HDHMR board .Each wardrobe shall also
have 2 drawer with locking arrangement .Shutter of the wardrobe should
be sliding with soft close sliding channel of Hafle make, Rate also include
s/f soft close autoclosing hinges ,s,s conceled handle
, ss.rod etc all complete
Digitally signed by AMIT
Estimate for Renovation & Interior fit out works for SIDBI guest house at Coimbatore
S.No. Description of item Unit Qty Rate Amount
S/F new loft shutter made up of 18 mm HDHMR board laminated with
approve shade laminate on both faces. Rate also include s/f auto
18 closing hinges 2 no. in each shutter ,pvc edge bending tape etc all Sqft 12.00 590.00 7080.00
Carefully cleaning of existing glasses of window with thinner ,labour
etc. i/c removing and refixing of glasses as per site requirenent
supply & fixing of 18 mm HDMR ply of size 1500 mm X 1200 mm having set
top box holder size 1200 mm X 200 mm placed 100 mm from TV unit. All
side with with 2mm laminate of approved colour & provision of 6/16 Amp
20 socket at top , Tv cable with switch plate. Two number of 6/16 Amp socket sqm 10.00 2670.00 26700.00
with one control switch above set top box point as per site conditiont
Providing & Fixing Quartz on Counter top Kitchen & Washroom
22 Providing & Fixing UPVC Window As per specifications
Three track three panels sliding window with fly proof SS wire mesh (Two
nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x
23 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and Sqm 30 10,030.30 300909.00
single glazing bead of appropriate dimension (Area of window upto 1.75
Casement window single panel with S.S. friction hinges (300 x 19 x 1.9
mm), made of (small series) frame 47 x 50 mm & sash 47 x 68 mm both
24 having wall thickness of 1.9 ± 0.2 mm and single glass pane glazing bead Sqm 30 10,443.75 313312.50
of appropriate dimension. (Area of window upto 0.75 sqm.)
Supplying and fixing table top square washbasin 40x40 cm with
c.p waste coupling and heavy duty waste pipe all complete as required
at site as directed by Engineer-in-Charge
Digitally signed by AMIT
Estimate for Renovation & Interior fit out works for SIDBI guest house at Coimbatore
S.No. Description of item Unit Qty Rate Amount
Providing and making cast in-situ100mm wide POP Cornice of approved
design at the junction of ceiling & walls including POP putty and
26 screws etc all complete as directed by ENGINEER IN CHARGE as Rmt 70.00 295.00 20650.00
required at site.
Providing and making cast in situ pop false ceiling with required g.i
frame work ,g.i mesh and finishing of same with pop in layers to
achieve proper level /finishing as per site requirement all complete.
Providing and applying pop punning on wall 5 mm thick in proper line and
28 level with required material ,t&p , labour etc. all complete Sqm 100.00 295.00 29500.00
Carefully removing the existing wash basin along with all accessories &
fixing of 1st quality centre hole white vitreous wash hand basin of size: 550
mm x 400 mm [approx.] with a pair of C.I. / M.S brackets, 32mm dia C.P.
waste coupling of premium quality, connections pipes ,waste pipe etc.
including providing and fixing in position the required length 40 mm
diameter CPVC waste pipe upto existing Nahani Trap etc all
complete as required
Fabricating ,supplying and fixing Vanity of required size approx 30 x
20 inch made up of 18 mm HDHMR board ,.8 mm laminate on all internal
faces and 1.0mm on shutter with auto closing hinges and fixing of same
with fastner etc. Rate are inclusive of s/f galaxy black granite on
30 top of vanity and making of moulding all complete. No. 1.00 10030.00 10030.00
Supplying and fixing pvc netlon jail of required size on existing
aluminium framework in balconies with Velcro. Rate also include
31 necessary alteration in the framework with new aluminium section as per Sqft 130.00 106.20 13806.00
Digitally signed by AMIT
Estimate for Renovation & Interior fit out works for SIDBI guest house at Coimbatore
S.No. Description of item Unit Qty Rate Amount
Supplying and fixing SS Curtain rod on door and windows with
required SS bracket. Rate also include s/f end funnels /cap of
approve design as per site requirement
Total Rs 2047320.50
Digitally signed by AMIT
MODULAR KITCHEN WORK
S.NO. Description Unit QTY. Rate Amount (Rs.)
Providing and fixing modular kitchen units for the kitchen
platform and top wall units to be fabricated by using HDHMR board
1 of thickness 18 mm for making cabinets of required sizes to match
with the sizes SS kitchen jali units and size of the SS sink as per
following details :-
Front bottom , top sides and shelf partitions of the
modular cabinets shall be of 18 mm thick HDHMR boards back
portion shall be of 8 mm thick HDHMR board with necessary
fittings , screws , pasting materials, finishing all exposed cut surfaces
with self adhesive PVC tape in matching shade as that of laminate .
The shutters and the pull out units shall be fixed 50 mm above the
kitchen floor level . All the inner portions of the cabinets shall be
finished with 0.8 mm thick laminate of white colour and approve
make..The front face of the cabinet shall be finished with1.0 mm
ultra gloss laminate shade 21162 MR+ & 21069 MR+ The fittings
like handles , telescopic channels SS baskets , auto closing
hinges shall be paid separately under respective items below .
Quoted rates shall be inclusive of labour , materials wastage
scaffolding fixing arrangements of top and bottom units with
necessary dash fasteners , repairing the damages, shifting the
debris out of colony , CP , taxes etc all as required for the execution of
the work . Note :- Only front elevation area shall be measured for
payment purpose.
a. Below platform units of depth 610 mm approx , Sqm 4.50 29500.00 132750.00
b Top wall units of depth 300 mm approx. with shelves Sqm 4.50 21240.00 95580.00
Providing and fixing stainless steel baskets and other
2 fittings , accesories of modular kitchen as per below mentioned
a SS 304 cutlery baskets 15 x20 x4 inch Each 1.00 2950.00 2950.00
b SS 304 Plain basket 15 x20 x6 inch Each 1.00 3540.00 3540.00
Digitally signed by AMIT
MODULAR KITCHEN WORK
S.NO. Description Unit QTY. Rate Amount (Rs.)
c SS 304 thali basket 15 x20 x8 inch Each 1.00 5310.00 5310.00
d SS 304 plain baskets 19 x20 x4 inch Each 1.00 3540.00 3540.00
e SS 304 plain basket 19 x20 x 6 inch Each 1.00 4130.00 4130.00
f SS 304 plain basket 19x 20 x8 inch Each 2.00 4720.00 9440.00
g SS baskets S —Corner basket Each 1.00 9440.00 9440.00
h SS detergent pullout Each 1.00 2360.00 2360.00
i SS dustbin ring Each 1.00 1770.00 1770.00
j Bottle Pull out basket set of width 9" with standard depth pair 1.00 8850.00 8850.00
k SS Handle 12 inch size No 12.00 590.00 7080.00
l SS auto close hinges soft close of all variety pair 10.00 850.00 8500.00
m telescopic channels 20 " size pair 10.00 885.00 8850.00
n S/F Chimney 1200 mm wide Each 1.00 36500.00 36500.00
Providing & Fixing kitchen sink 36 x18 x8 with drain board
O Emarald black Each 1.00 16500.00 16500.00
Providing & Placing Washing Machine 7kg as per approved brand &
Providing & Placing Dish Washer as per approved brand & Design
Total Amount Rs. 421490.00
Total Amount Rs. 421490.00
Digitally signed by AMIT
ELECTRICAL WORKS
S.NO. Description Unit QTY. Rate Amount (Rs.)
Carefully disconnection and removing all fans, fittings, decorative lights, water purifier,
1 geysers, wires, conduits, casing capping , switch boards/ DB etc. in flat and keeping reusable JOB 1.00 8500.00 8500.00
items like exhaust fans ceiling/wall fans, LED batten water purifier, geyser etc.
WIRING FOR LIGHT POINT AND EXHAUST FAN POINT
Supply, Laying, testing & Commissioning — Concealed Wiring for Light Points using
three runs of 1.5 sq mm (Red/yellow/blue, Black and green) wires, 1100 volt grade fire
resistant low smoke (FRLS) PVC insulated stranded copper conductor wire (Neutral,
and earth in looping system) from main switch boards to respective point outlet (inclusive
of circuit wiring using three runs of 2.5 sq mm (Red/yellow/blue (Phase), Black (Neutral)
and green (Earth)) 1100 volts grade stranded copper conductor PVC insulated fire
resistant low smoke FRLS wire from MCB DB to respective Control switchboards in
similar manner) insulation in new approved make HMS grade PVC conduits and with all
required accessories support to it, by chasing wall/floor and back filling with cement
sand mortar (1:3) and making the good damages as original finish manner and in PVC
02 casing capping/ PVC conduit where provision of concealed conduits s not possible as No 20.00 1180.00 23600.00
directed by Bank’s Engineer. There should be suitable length extra wires in the MS
concealed box of switch boards. All the wires shall be terminated in switches and
sockets. There should not be any joint of wires n switchboard. It comprises of 6 Amp
plate type modular switch mounted on respective make and model mounting plate and
MS concealed /PVC surface box, with interconnection and also complete outlet points
either with angle holder
/ ceiling rose / connector etc. as directed for light point. Each room should have
separate circuit from MCB DB to switch board in respective rooms, or to be carried out
03 Wiring for Ceiling Fan Point
Same as Item No. 02 above but for ceiling fan point along with supply and fixing of
electronic step type hum free fan regulator (4/5 step socket size with speed marks) as
approved by ENGINEER IN CHARGE, modular type of approved make with 6 Amp
modular switch as specified in Item No 02 and complete with interconnection etc
04 Wiring for half Point on Control switch board
Digitally signed by AMIT
ELECTRICAL WORKS
S.NO. Description Unit QTY. Rate Amount (Rs.)
Providing (half-point) wiring using 3 runs of 2.5 sq.mm multi- stranded copper
conductor- FRLS wire for phase, neutral and earth PVC insulated 1100 volts grade for 6
Amp. universal socket (2 pin + 3 pin) and switch (modular type) to be fixed on same switch No 45.00 590.00 26550.00
board which is used for light/ fan/ exhaust-fan.
05 Wiring for 16 Amp Plug point — Independent
Wiring for independent 16 Amps plug point with 2.5 sq mm x 3 runs multi stranded
copper conductor FRLS wire (from MCBDB to Plug point) for phase, neutral and earth PVC
insulated 1100 volts grade in rigid PVC conduit of approved size along with
accessories to be laid in concealed manner as specified in Item No. 02 above, along with
16 Amp neon/ LED indicator plate type modular switch and shutter type 6/16 Amp No 10.00 2360.00 23600.00
socket mounted separately on suitable size concealed heavy duty MS box or with PVC board
on surface along with covers of approved make.
06 Wiring for Secondary Power Point
Providing secondary wiring/ loop circuit wiring using 3 runs of 2.5 sq.mm multi-stranded
copper conductor- FRLS wire for phase, neutral and earth PVC insulated 1100 volts
grade along with 16 Amp neon/ LED indicator plate type modular switch and shutter type
6/16 Amp socket mounted separately on suitable size concealed heavy duty MS box or No 7.00 1416.00 9912.00
with PVC board on surface along with covers of approved make. These 16 Amps points are
to be extended from Independent
16Amp power plug points provided in the flat as directed by Engineer Incharge.
07 Wiring for Group of 2 Nos /3Nos 6Amp Light Plug Point
Wiring for independent Group of 2 Nos/3Nos 6 Amps plug point
with 3 x 2.5 sq mm multi stranded copper conductor FRLS wire for phase, neutral and earth
PVC insulated 1100 volts grade in rigid PVC conduit of approved size along with
accessories to be laid in concealed manner as specified in Item No. 02 above, along with two
nos./three no of 6 Amp plate type modular switches and two nos. of 6 Amp shutter type (2
pin + 3 pin) sockets mounted separately on suitable size heavy duty concealed MS Box No 10.00 2360.00 23600.00
or PVC board for surface, with covers of approved make. These 6 Amps points are to
be extended from switch-boards provided in each room as directed by Engineer In
08 Wiring for Call Bell Point
Digitally signed by AMIT
ELECTRICAL WORKS
S.NO. Description Unit QTY. Rate Amount (Rs.)
Wiring for bell point as per Item No. 02 above but with
6 Amp modular bell push to be fixed in concealed manner with control-off switch on
switchboard provided in the flat along with supply and fixing of ding dong bell of No 1.00 1180.00 1180.00
approved make with hardware materials, as approved by ENGINEER IN CHARGE.
09 Wiring for Group of 2 Nos 16Amp Power Point
Wiring for independent Group of 2 Nos 16 Amps plug point with 3
x 2.5 sq mm multi stranded copper conductor FRLS wire for phase, neutral and earth
PVC insulated 1100 volts grade in rigid PVC conduit of approved size along with
accessories to be laid in concealed manner as specified in Item No. 02 above, along with two
nos. of 16 Amp modular switch and two nos. of 16 Amp shutter type 6/16 Amp (2 pin +
3 pin) sockets mounted separately on suitable size heavy duty concealed MS Box or PVC
board for surface, with covers of approved make. These 6 Amps points are to be extended
from MCBDB as directed by Engineer In Charge.
10 Wiring for Group of 06 Amp + 16 Amp Power Point
Wiring for Group of one 6 Amp light plug Point and one 16 Amp power plug point, which
means one no. of 16 Amp neon/LED lamp indicator plate type modular switch and one no. of
6 Amp switch mounted on respective make and model mounting plate and MS concealed
/PVC surface box installed in the line of switch board on platform in the kitchen; and another
set of one no. of 6 Amp socket and 6/16 Amp socket mounted on respective make and
model mounting plate and MS concealed /PVC surface box installed near to geyser and No 6.00 2596.00 15576.00
water purifier in the kitchen, 3 nos. 2.5 sq. mm interconnecting copper conductor PVC
FRLS insulated wire for switch/ socket and in new HMS grade PVC conduit in
concealed manner as stated in scope of work, as directed by Engineer In Charge
11 Cable TV Wiring
One point Consisting of TV coaxial socket plate mounted on
respective make and model required size separate mounting plate and MS concealed box
and RG6 copper coaxial cable in new HMS grade PVC conduits starting from
outside/balcony and ending at TV socket outlet points in living room/ bedroom of
individual flat as stated in detailed scope of work. Common conduit as per Sr No. 10 can
be used for laying of TV cable from outside/balcony to TV socket on switchboards with 1
meter loose cable at outside end for connections to be done later, using all accessories
as per Item No. 02
Digitally signed by AMIT
ELECTRICAL WORKS
S.NO. Description Unit QTY. Rate Amount (Rs.)
Supplying ,Fixing, testing and commissioning of following Electrical items with necessary
SITC of LED tube light fixture of 4’ length 36 Watt white colour LED tube light on new white
colour square PVC block and using two/three core copper conductor PVC insulated
A preferably white colourcable from tube light fixture to ceiling rose as directed by Engineer In No 12.00 1180.00 14160.00
SITC of 48 inch Ceiling fan of approve shade make with all
B necessary mounting accessories To provide 3 mm thick Bakelite round plate with required No 6.00 2950.00 17700.00
hardware near the ceiling fan hook.
PVC exhaust fan of 200MM size with pvc louver protection complete with required
fittings and hardware etc. and using two/three core copper conductor PVC insulated
preferably white colourcable from exhaust fan to ceiling rose as directed by Engineer In No 6.00 1652.00 9912.00
SITC of 25 litre horizontal geyser CDR i/c all necessary hardware material etc .all
13 15 watt LED PANEL
SITC of 15 watt LED panel light at entrance, balconies and kitchen
A both surface and conceled type i/c connection and testing complete. No 10.00 1416.00 14160.00
SITC OF 18/20 Watt LED panel light on ceiling with required
B hardware material all complete (Dinning room) No 6.00 2360.00 14160.00
SITC of cabin fan 12 inch size on ceiling with required material
SITC of fancy fittings
15 LED tube light
10 Watt 2 ft led fitting, White Colour No 2.00 354.00 708.00
16 MCB Distribution Box
SITC of 3 phase 4 way TPN double door (plain metallic) MCBDB in concealed manner
inside the flat as directed by Bank’s Engineer with below mentioned MCBs and required
black off, mortar and hardware for installation of MCBDB. This work is carried out after
removing of existing concealed MCBDB/ fuse
Digitally signed by AMIT
ELECTRICAL WORKS
S.NO. Description Unit QTY. Rate Amount (Rs.)
C Curve 63A 4 Pole MCB — 01 No. and SPMCB 20 Amp — 07 Nos., SPMCB 10 Amp 5 No
Making Provision of installation of AC in rooms including piping , wiring making holes , stand
Total Amount Rs. 347005.00
Total Amount Rs. 347005.00
Digitally signed by AMIT
S.NO. Description Unit QTY. Rate Amount (Rs.)
Providing and applying one coat of wall primer and two or more
coats of Premium quality 100 % Acrylic Emulsion Paint of
approved make & shade as per the manufacturer’s
specification to the interior surfaces of walls, ceilings,
beams, columns, canopies, staircase, lobbies, etc to get desire
shade and finish at all heights with roller finished etc. all
complete as directed
Providing and applying two or more coats of 1st quality
synthetic enamel paint of approved make and shade to steel
work, viz., grills, gates, weld-mesh rolling shutters to achive
the desired smooth finish etc.all as per
2 specifications including scaffolding, scraping, surface Sqm 60.00 195.00 11700.00
preparation,cleaning etc. all complete as directed by the
Engineer Incharge.
Rebate for salvage value of removed / dismantlled all
unserviceable materials and taking it away outside the Bank’s
Premises as per the prevailing municipal norms. The
unserviceable materials shall means the materials like
building materials, wooden materials, hardwares fittings,
3 plumbing & sanitary fittings, fixtures, GI/CI pipe lines Each -1.00 7500.00 -7500.00
,electrical wires ,switch board etc removed under all the
items of this tender as directed by the Engineer-In-Charge.
Total Rs. 103400.00
Digitally signed by AMIT
S.NO. Description Unit QTY. Rate
Supplying and fixing looking mirror of 5 mm thick looking
glass with bevelled edges and holes as per site requirement
,Rates are inclusive of fixing of glass with SS stud all
1 complete as directed by Engineer Incharge Sqft 28.00 354.00 9912.00
Providing and fixing in position as per approved
equivalent quality Towel rod of 24" length with brackets
fixed over tiles with rowel plug and approved quality
2 screws including cutting and making good the tiles. Each 2.00 1652.00 3304.00
Providing and fixing in position as per approved quality
Towel ring fixed over tiles with rowel plug and approved
quality screws including cutting and making good
3 the damages of tiles etc. all complete as required at site as Each 2.00 1475.00 2950.00
directed by the Engineer-in-Charge.
Providing and fixing in position Chlorinated Poly Vinyl
Chloride (CPVC) pipe SD-11 of approved make in
desired thickness having thermal stability for hot and cold
water supply of including all CPVC plain & brass threaded
4 approved fittings and fixing the pipe with clamps &
screws as per the site requirements
at 1.00 meter C/C etc. all complete.
a (a) 20mm nominal dia Rmt 55.00 472.00 25960.00
b (b) 40 mm Nominal dia Rmt 22.00 590.00 12980.00
c c) 65 mm dia pvc pipe with fitting Rmt 12.00 590.00 7080.00
d d)15. mm dia brass ball valve in kitchen shaft No. 4.00 1180.00 4720.00
Digitally signed by AMIT
S.NO. Description Unit QTY. Rate
Supplying and fixing position the following approved
make fittings & fixtures, including carefully removing the
existing old/damaged fittings & fixtures and handing
15mm dia. C.P. Brass Pillar Cock with CP
5 flange of continental series of approved equivalent Each 2.00 1239.00 2478.00
15 mm dia. C.P. Brass bib cock with nozzle wall CP. flange
of approved equivalent make.
15 mm dia. C.P angle valve with wall CP. flange of
7 continental series of approved equivalent make. Each 6.00 1416.00 8496.00
15 mm dia. C.P. Brass central hole single lever wash basin
mixer of approved equivalent make including plumbing
8 fittings and 450 mm long braided hoses etc. all Each 2.00 4720.00 9440.00
complete as required at site.
15 mm dia. C.P. 4 way high flow single lever divertor with
cover plate ,c.p pin . Including all plumbing fittings&
9 fixtures etc all complete as required at site as directed by Each 2.00 7670.00 15340.00
ENGINEER IN CHARGE .
15 mm dia C.P spout of approve design with C.P
10 Handshower and c.p flexible tube of required length No. 2.00 6490.00 12980.00
C.P Overhead shower 150 X150 mm with 450 mm long C.P
100mm dia. Heavy quality stainless steel Jali (grating)
with or without holes for waste pipe of floor / Nahani trap
12 etc all complete as required at site as directed by Each 6.00 177.00 1062.00
Engineer In charge
Heavy quality CP Soap dish of Jaquar or approved
equivalent make.
Digitally signed by AMIT
S.NO. Description Unit QTY. Rate
15 mm dia .C.P brass two way bib cock with hand shower
(health faucet) with flange of approved equivalent make
14 etc all complete as required at site as directed by the Each 2.00 5310.00 10620.00
Engineer-in-Charge.
15 mm dia. C.P brass conceled stop cock with upper body
15 plate as per approved make Each 2.00 2124.00 4248.00
Providing and fixing glass shelf of including bracket etc. all
16 complete as directed by ENGINEER IN CHARGE. Each 4.00 2360.00 9440.00
Providing and fixing table mounted sink mixture as per
approved design & make
18 S/F 450 mm long pvc connection Each 4.00 177.00 708.00
Providing & fixing in position approved make 1st
quality vitreous china glazed wall mounted European WC
of standard size with either P trap as per site requirement
19 and providing & fixing conceled cistern with required Each 2.00 24780.00 49560.00
material ,labour etc i/c cover plate all complete
Same as above but using extended wall mounted
20 model with cistern complete set Each 2.00 29500.00 59000.00
Providing and fixing in position 100 mm dia. and 75mm
outlet pvc floor trap having seal of 40 mm to 50mm,
approved equivalent ISI mark having necessary length of
extension pipe wherever required including cutting of
21 concrete and repairing with concrete after Each 6.00 885.00 5310.00
completion all complete.
Supplying and fixing table top square washbasin
40x40 cm l with c.p waste coupling and heavy duty waste
22 pipe all complete as required at site as directed by Each 2.00 8850.00 17700.00
Engineer-in-Charge.
Providing & Fixing Paper holder as per approved make
Digitally signed by AMIT
S.NO. Description Unit QTY. Rate
Providing & Fixing grab bar SS 18 inch as per approved
Total Rs. 309786.00
Digitally signed by AMIT
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.06 MB
NIT SIDBI FINAL.pdf
Tender Document
SCC SIDBI Final.pdf
Tender Document
GCC upto amend4.pdf
Tender Document
Instruction to Bidder for online Bid Submission.pdf
Tender Document
Forms.pdf
Tender Document
Approved make list.pdf
Tender Document
Boq SIDBI.pdf
Tender Document
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .