PROVN OF DADO TILING VERANDAHS STAIRCASE AREA UP TO 4 FEET HEIGHT IN BLDG NO P109 CERAMIC TILING IN 05 CLASS ROOMS AT P47A BLDG AT NCS NUASENA BAUGH PROVISION OF INDEPENDENT FRESH WATER PIPE LINE IN KITCHEN AT OLD NAUSENA BAUGH AS AS OF FLOAT VALVE

Amount

Plain Cement Concrete 1:3:6 type C2, (using 40mm graded granite stone aggregate) in concrete to bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for pipes of 150 mm bore complete all as specified and as directed.

Precast cement concrete 1:2:4, type B1 (Using 20 mm graded stone aggregate) in landings, cover slabs (for manholes etc.) shelves and similar articles with plain faces including necessary formwork and set in cement mortar 1:4 complete all as specified and as directed.

Mild Steel high strength Corrosion resistant TMT deformed bars of grade Fe-500D of bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and as directed.

Brick work with fly ash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed.

Brickwork with fly ash bricks in half brick thick straight or curved on plan exceeding 6m mean radius and built in cement mortar 1:4 all as specified and as directed.

Walling of Random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and as directed.

Rendering 15mm thick on concrete / brick surface in CM (1:3) mixed with water proofing compound @2% by weight of cement, finished even and smooth without using extra cement complete all as specified and as directed. Note: Water proofing compound will measued and paid separately.

Supply only integral water proofing compound conforming IS 2645-1975 of approved make. Make : Acco proof / Impermo / Lik proof / Scott No. 1

Preparation of new steel surfaces of any description , over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed. Make :M/s. Asian Paints [Apcolite], M/s. Berger Paints [Luxol], Jenson & Nicholson [Brolac] all are 1st quality.

Coloured, non skid, joints free ceramic tiles 7 to 8 mm thick ( square / rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc. laid over and including 15 mm thick screed bed in CM(1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed. Make : Kajaria Ceramics Ltd / Asian Granito India Ltd / Somany Ceramics Limited / Varmora Granito Pvt Ltd / H & R Johnson India Ltd / Nitco / Orient Bell Ltd/ Oasis Vitrified Pvt Ltd (Premium Quality)

Coloured glazed ceramic tiles size 300 X 200 X 7 mm thick on vetical surfaces such as skirting ,dados etc set and jointed in neat cement slurry and pointed in white or Coloured cement to match including rendering 10 mm thick on fair faces of brick work or concrete surfaces as in backing coat in cement mortar 1:3 for complete all as specified and as directed. Make :- Kajaria Ceramics Ltd / Asian Granito India Ltd / Somany Ceramics Limited / Varmora Granito Pvt Ltd / H & R Johnson India Ltd / Nitco / Orient Bell Ltd/ Oasis Vitrified Pvt Ltd (Premium Quality)

Coloured glazed ceramic tiles concept pattern size 300 X 450 X 7 mm thick on vetical surfaces such as skirting ,dados etc set and jointed in neat cement slurry and pointed in white or Coloured cement to match including rendering 10 mm thick on fair faces of brick work or concrete surfaces as in backing coat in cement mortar 1:3 for complete all as specified and as directed. Make :- Kajaria Ceramics Ltd / Asian Granito India Ltd / Somany Ceramics Limited / Varmora Granito Pvt Ltd / H & R Johnson India Ltd / Nitco / Orient Bell Ltd/ Oasis Vitrified Pvt Ltd (Premium Quality)

Chequered cement concrete/ terrace tiles with grey cement and white pigment 30 cm X 30 cm X 25 mm thick, set, jointed and pointed in neat cement slurry in floors, the colour and pattern of tile as in floors laid over and including 15 mm thick screed bed in CM(1:4) , colour and design of tiles shall be as approved by Accepting Officer complete all as specified and as directed. Make: Ultra / Bansal / Nitco / Anjali / Multiwyn

Cutting holes into or through brick work/RCC wall built in cement mortar for fixing pipe and making good dismantled portion in CM(1:3) or in cement concrete 1:2:4 type B-1 , sperficial area not exceeding 150 Sqcm all as specified and directed.

Demolition of un-reinforced cement concrete in ground floor and paving not exceeding 15 cm thick (below or above ground level) complete all as specified.

Demolition of brick work or stone / boulder masonry, built in cement mortar including all quoins, pillars etc., and disposal off unserviceable materials, debris to out side MD land complete all as specified and as directed.

Demolition of Plain Cement Concrete of any description and in any position not otherwise specifically provided and removing rubbish to out side MD land work complete all as specified and as directed.

Removing building materials (other spoil payble under earth work and rate shall apply only where removing of etc is not other wise provided for or consider in Schedule of credit ) to distance exceeding 1.50 Km but not exceeding 5 Km including loading, unloading and stacking at the destination complete all as specified and directed. Note: One metric tonne shall mean one load .

40 mm thick Plain Cement Concrete 1:2:4 type B1 (Using 20 mm graded granite stone aggregate) as in sub base of floorings /hard standing complete all as specified and as directed.

Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc., including removal of rubbish to outside the premises, and depositing serviceable materials where directed and leaving the work site clear of any plastering complete all as specified and as directed.

Mild Steel Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors, and gates; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe Fe 290 Gde E-165 including for portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc and necessary welding or fixing with screws etc as directed

1.0 mm thick Plain, black, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) complete all as specified and as directed.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for Refixing or removal to store complete all as specified and as directed

Ditto all as per serial item No.23 but 25 mm dia bore

Ditto all as per serial item No.23 but 40 mm dia bore

Ditto all as per serial item No.23 but 50 mm dia bore

Ditto all as per serial item No.23 but 80 mm dia bore

GI water tubing 15 mm dia bore ISI marked medium grade including all fittings such as bends, tees, short pieces connectors, elbows, reducers, unions, sockets etc and fixing accessories such as pipe hooks, screws, clamps etc laid in to walls , ceilings or floors etc complete all as specified. Make:-Surya Roshni Ltd / Tata / Jindal steel / Prakash

Ditto all as per serial item No.28 but 20 mm dia bore

Ditto all as per serial item No.28 but 25 mm dia bore

Ditto all as per serial item No.28 but 40 mm dia bore

Ditto all as per serial item No.28 but 50 mm dia bore

Ditto all as per serial item No.28 but 80 mm dia bore

Bib taps, cast copper alloy with crutch or butterfly handle with capstan head, screwed down, screwed for 15 mm dia bore iron pipe complete all as specified and as directed. Make : Jaquar / Hindware / Orient / Seiko / Dripless /Cera

In repairs, gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe 25 mm dia complete all as specified and as directed. Make: Kirloskar / L & T / Upadhyay / Leader / Zolotto

Ditto all as per srial item No. 35 but 50 mm bore

Ditto all as per srial item No. 35 but 80 mm bore

40 mm float valves for multistories buildings including demolition of RCC wall if required at site, making thread on existing 80mm dia pipe, fixing of 80mm Tee, reduer socket, weilding work if required for joints fixing of 40mm float valve complete all as specified and as directed. Make: Kirloskar / L & T / Upadhyay / Leader / Zolotto

20 mm bore of High density polyethylene pipes(HDPE) of pressure rating 6 kgf/sqcm fixed to walls etc as sleeves complete all as specified and directed. Make: Kisan / Jain Irrigation / Supreme / Prince / Oriplast / Ajay Flow

M/s Sudersana Traders

AMBIKAA ENGINEERING

SRI VENKATA SAI MANIKANTA CONSTRUCTIONS

SRI SAI SRINIVASA CONSTRUCTIONS

K SATYANARAYANA ENTERPRISES

MAHALAKSHMI CONSTRUCTIONS

M/s VENKATA JAHNAVI CONSTRUCTIONS