PROVISION OF GROUND EQUIPMENT BAY, PCC PATH, CAGING AND SPECIAL REPAIR TO OLD MET SECTION UNDER AGE B/R-I AT AF STN BARODA

Amount

Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out in hard/dense soil complete all as specified and directed.

Excavating in trenches n exc 1.5 m wide and n exc 1.5m in depth, for foundation, etc and getting out in soft/loose soil complete all as specified and directed.

Removing excavated material to a distance n.exc 50m and depositing where directed at a level n exc 1.5 m above the starting point complete all as specified and directed.

Returning , filling in, incl spreading leveling, watering and well ramming in layers n.exc 25cm in soil complete all as specified and directed.

M&L for Hard core with broken stone of gauge n.exc. 63mm deposited spread and levelled in layers n.exc.15cm thick complete all as specified and directed.

M&L for moorum/red bajri filling under floor/pavement or in foundation laid in layers n exc. 15cm thick, spread , levelled and rammed including watering and consolidation complete all as specified and directed.

M&L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) in foundation ,filling and mass complete all as specified and directed.

M&L for PCC 1:4:8 typeD2 (using 40mm graded stone aggregate) 75mm thick as in sub base complete all as specified and directed.

M&L for PCC 1:4:8 typeD2 (using 40mm graded stone aggregate) 100 mm thick as in sub base complete all as specified.

M&L for 75mm PCC 1:3:6 type C1 (using 20mm graded aggregate) in plinth protection,floors and pavings complete all as specified and directed.

M&L for reinforced cement concrete (design mix) (M-25) using 20mm graded stone aggregate as in slabs supported on walls, beams and coloumns in floor, roof, landing, balconies, canopies, deck slabs and in shelves and the hike shelves etc and similar work complete all as specified and directed.

M&L for reinforced cement concrete (design mix) (M-25) using 20mm graded stone aggregate as in foundations, including rafts, footings, foundation beams, bases for coloumn, etc basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for reinforced cement concrete (design mix) (M-25) using 20mm graded stone aggregate as in colums,pillars,pier posts etc complete all as specified and directed.

M&L for reinforced cement concrete (design mix) (M-25) using 20mm graded stone aggregate as in beam, cantilevers, bressummers, lintel over 1.5 span and similar work complete all as specified and directed.

M&L for reinforced cement concrete (design mix) (M-25) using 20mm graded stone aggregate as in chajjas complete all as specified and directed.

Formwork to sides of concrete foundations,footings, base of columns, raft and raft beams, side and soffits of foundations ,plinth beams and similar work vertical or to batter complete all as specified and directed.

Formwork to side of pillars, posts struts, piers, columns and stanchions complete all as specified and directed.

Formwork to sides and soffits of floor or roof beams haunchings, girders, bressummers, lintals, bands,chajjas, cantilevers, shelves including sup-ports overhangs, etc also splays between floor and beams etc complete all as specified and directed.

Formwork to sides and soffits of suspended slabs such as roof slabs, floor slabs,, landings and similar works, not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

Formwork to sides and soffits of chajjas, troughs and similar items including edges complete all as specified and directed.

M&L for Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal for sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and directed.

M&L for 10mm dia and over , TMT bars, cut to length, bend to shape required including cranking bending spirally for hoping for columns hooking and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to deformed or twisted bars complete all as specified and directed.

M&L for 6 to 8mm dia , TMT bars, cut to length, bend to shape required including cranking bending spirally for hoping for columns hooking and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to deformed or twisted bars complete all as specified and directed.

M & L for TMT bars 5mm dia and over up to and including 10mm dia in stirrups, spacers and binders including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire annealed, not less than 0.9mm dia complete all as specified and directed.

M/L brick work with sub class B brick straight or curved on plan exc. 6 M mean radius built in cement mortar 1:6 complete all as specified and dircted.

M&L for 10mm thick cement plasters in CM 1:6 on concrete or brick wall surfaces finished even & smooth with out using extra cement complete all as specified and directed.

M&L for 15 mm rendering in two layers with 10 mm with CM 1:6 & 5 mm thick with CM (1:4) with using water proffing compound on fair face of wall or on concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for 5 mm thick cemet plaster on ceilling CM 1:3.even and smooth complete all as specified and directed.

Supply only Water Proofing Compound ISI Marked complete all as specified and directed.

M&L for preparing plastered surfaces of walls/ceiling and applying two coats of birla white cement putty by finishing the surfaces to even and smooth and applying two coats of oil emulsion distemper over a coat of primer complete all as specified and directed.

M&L preparation of newly plastered or unplastered wall surfaces and applying two coats of exterior ACRYLIC Emulsion paint (colour or shade as approved by GE) over and including a coat of primer as per manufacturers instruction complete including cleaning window glasses, joinery, electric fittings, wiring etc of drops and splashes and cleaning permise clean and tidy including necessary steel scaffolding complete all as specified and directed

M&L preparing the new surface of ceiling, soffits of chajjas and applying 03 coats white wash complete all as specified and directed.

M&L for 20 mm thick screed bed or bedding layers in CM 1:6 over roof surfaces without using extra cement for screed bed with water proofing compound (WPC) complete all as specified and directed.

M&L for applying cold bituminous primer @ 0.30 ltr/Sqm conforming to IS 3384 and laying APP polymer modified fiber glass reinforced membrane 3mm thick 3.5Kg/Sqm (modified bituminous water proofing membrane) with plain polythene finish and sealing all the over laps of 75 mm in length side and 100 mm on the width side of membrane by torching the same all as per manufacturer instruction including one coat of butuminous aluminum paint @ 0.10 ltr/sqm over membrane complete all as specified and directed.

M&L for Screed bed or bedding layer of mortar 20 mm thick for laying floor finishes in CM 1:6. complete all as specified and directed.

M&L Machine cut kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and directed.

M&L for Kota stone slab 15-20 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including moulding/rounding edges rubbing and mirror polishing complete all as specified and directed.

Supply, laid, fix and testing galvanised steel water tubing, ISI marked, medium grade galvanized with and including all tube fittings ISI marked and fixtures such as tees, elbows, diminishing pieces etc. complete fixed to wall and ceiling or laid in floors of sizes:-

Note: - Water supply pipe line inside the building shall be concealed. The cost of cutting chases & making good shall be deemed to be included under quoted rate of GI tubing.

Taking up or down 20mm bore steel tubing and connections, including cleaning for re-fixing or removal to store all as specified and directed

Taking up or down 25mm bore steel tubing and connections, including cleaning for re-fixing or removal to store all as specified and directed

Taking up or down 15mm bore steel tubing and connections, including cleaning for re-fixing or removal to store

Refixing old steel tubing 20mm bore and connections in new or old position (Walls, ceiling, floors, etc.) all as specified and directed

Refixing old steel tubing 25mm bore and connections in new or old position (Walls, ceiling, floors, etc.) all as specified and directed

Disconnecting existing water tanks (PVC/RCC) exc 250 ltr & n.exc 500 ltr capacity, setting aside (or lowring if required ) for repairs, cleaning etc and hoisting if required , reconnected including cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. complete all as specified and directed.

Disconnecting existing water tanks (PC/RCC) exc 500 ltr & n.exc 1000 ltr capacity, setting aside (or lowring if required ) for repairs, cleaning etc and hoisting if required , reconnected including cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. complete all as specified and directed.

S&F (in repair) 20mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/2 0 m m - 2 1 0 g m s . /25mm-455gms/ 40mm - 690 gms) complete all as specified and directed

S&F (in repair) 25mm sizeBall valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/2 0 m m - 2 1 0 g m s . /25mm-455gms/ 40mm - 690 gms) complete all as specified and directed.

S&F 20mm GI Nipple suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm45gms /25mm- 65gms) complete all as specified and directed

S&F 25mm GI Nipple suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm45gms /25mm- 65gms) complete all as specified and directed

Supply & fix Stop valve,angle valve 15 mm bore of pipe,minimum finished mass 0.575 kg each (ISI marked),fancy type,chromium plated with long shank and cup (concealed type)cast copper alloy screwed down, high pressure with crutch or butterfly handle screwed both ends for (externally threaded), for iron pipe or for union complete all as specified and directed.

Supply and fix Bib taps (ISI marked) chromium plated cast copper alloy with, crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed of size 15mm bore minimum finished mass 0.575 kg each complete all as specified and directed.

S&F bib tap for 15mm bore pipe cast copper alloy, CP, fancy type with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

Supply and fix pillar tab cast copper alloy with capstan head chromium plate, fancy type with or without lettered HOT or COLD with long screwed for iron pipe and fixed to 15 mm pipe complete all as specified and directed.

Supply and fix 20 mm bore Gun metal globe or gate valve with iron wheel head screwed both ends for iron pipes and fixed complete all as specifed and directed.

Supply and fix 25 mm bore Gun metal globe or gate valve with iron wheel head screwed both ends for iron pipes and fixed complete all as specifed and directed.

S&F PVC connections 15mm size with PTMT nuts of length 300mm complete all as specified and directed

S & F 4 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.

S& F 1.25 mm thick Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete push pull or manual type complete all as specified and directed.

S & F Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed.

M& L for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and no pigment over and including min 40 mm thick sand cushioning complete all as specified and directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement incl form moulds mitred, stoped end etc. complete all as specified and directed.

Cutting into existing manholes (Int dia of pipe 150mm) for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and directed.

M&L for PCC (1:2:4) tye B1 (using 20m graded stone aggregate) in coping including formwork complete all as specified and directed.

M&L for PCC (1:2:4) tye B2 (using 40mm graded stone aggregate) in surface channel & draining complete all as specified and directed.

M&L for cement concrete slab in cement concrete 1:1.5:3 type A-1 (using 20mm graded stone aggregate)in manhole covers, drain covers, shelves etc with plain faces etc complete all as specified and directed.

M&L for 150 mm dia Reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and directed.

M&L for concreate bed to drain peipe 150 mm dia incl packing under and hunching against the sides or pipe after they are laid and teste din PCC (1:3:6) type C2 complete all as specified and directed.

M&L applying two coat synthetic enamel paints over a coat or red oxide zinc chrome primer on new steel surfaces including preparation of new painted steel surfaces complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specifications & drawings complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawingspecification and drawing complete all as specified and directed.

M&L for hoisting & fixing rotational moulded polyethylene water storage tank of capacity 500 Ltr (Cylendrical vertical with closed top) in position incl float valve complete all as specified and directed complete all as specified and directed.

M&L for hoisting & fixing rotational moulded polyethylene water storage tank of capacity 1000 Ltr (Cylendrical vertical with closed top) in position incl float valve complete all as specified and directed

S&F Ball brass valve high pressure with polythene float and fly nut complete screened for Iron pipe or brass ferrule and fixed complete 20mm bore complete all as specified and directed

S&F 10 litres capacity PVC valveless symphonic action type, flushing cistern, low level, white, with inlet, ball valve float handle including brackets complete all as specified and directed.

S&F flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cisterncomplete all as specified and directed

S&F concealed stop cock with adjustable wall flange, cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions, and fixed for bore 15mm bore of pipe complete all as specified and dircted

S&F Vitreous China wash basin, white flat back, size 580x450mm including waste coupling, waste pipe and bracket for erecting stand complete all as specified and directed

S&F Waste coupling of PTMT (half or full threaded) for 32mm dia waste pipe suitable for urinals, (Minimum weight 32mm-45gms complete all as specified and directed.

S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and directed

Supply & fixing cast iron nahani trap 75mm outlet dia with grating including jointing to waste pipe fixed in cement concrete type B-1(1:2:4) complete all as specified and directed

S/F grating square 100mm size of PTMT (minimum weight 100 gms ) complete all as specified and directed

M&L for PVC (SWR ) gully trap 125/110mm, setting and jointing with solvent cement in repair complete all as specified and directed

S&F PVC (SWR) pipes single socketed,in any length with rubber ring joints fixed to walls.a) complete all as specified and directed of following Dia of pipe

110mm dia of pipe

75mm dia of pipe

S&F PVC (SWR) bends any radius,bore of pipe 110mm complete all as specified and directed

S&F PVC (SWR) bends any radius,bore of pipe 75mm bore complete all as specified and directed

S&F PVC (SWR) junction single, (Single T ) equal or un equal , bore of pipe 110mm complete all as specified and directed

S&F PVC (SWR) junction single, (Single T ) equal or un equal , bore of pipe 75mm bore complete all as specified and directed

S&F 150mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed

S&F 100mm Butt hinges medium weight, cold rolled mild steel complete all as specified and directed

S&F 100 mm anodised aluminium handle cast type complete all as specified and directed

M/L for screed bed or bedding layer of cement mortar 1:6, 15mm thick for laying floor finished complete all as specified and directed.

M&L for non- skid ceramic coloured rectangular edge cut tiles 7 to 8 mm thick area of each tile exc 0.06 sqm but not exc 0.11 sqm, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match. complete all as specified and directed.

M&L for 10 mm thick rendering on fair faces of concrete surfaces in CM 1:4 as backing coat for tiles on vertical surfaces without using extra cement complete all as specified and directed.

M&L for Glazed ceramic coloured tiles in vertical surface 300x 450x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade in concept pattern as per IS-13753 complete all as specified and directed

M&L for coloured Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for coloured Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in Skirting/Dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

S&F Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms) complete all as specified and dircted

M&L for powder coated aluminium frame (Powder Coated, Min thickness of powder coating 50 micron) for doors, windows, ventilators with one or more rebates including fittings, joining cleat and rubber suitable beeding for fixing etc. complete all as specified and directed

M&L for18- 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including grinding, nosing etc complete all as specified and dircted

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with wooden beadings complete all as specified and dircted

S&F 4.8 mm thick frosted on one side sheet glass fixed with and including necessary rubber gasket and aluminium beading complete all as specified and directed.

S&F 5.5mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed

M&L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and dircted

S&F Vitreous China urinals, Half stall,complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe complete all as specified and directed.

S&F Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed.

M&L for 100 mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in flooring finished even and smooth using extra cement in panels of size 1.00x1.00m using glass dividing strip complete all as specified and directed.

M&L for Glass dividing strips, 3 mm thick and width of strip 38mm inserted in position, conform to design complete all as specified and directed.

S&F mild steel 4mm dia galvanised steel wire, 150x100mm mesh, made up into mattresses or cages, lapped, wired and laid in position, including closing after filling complete all as specified and directed.

S&F 100mm Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed.

S&F 200mm Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

Taking down cement plastered on brick or stone walls etc including raking out joint, hacking for key, scrubbing down with water etc, complete all as specified and directed

M&L for rendering in two layers (i.e) CM 1:6, 10mm thick as first layers and CM 1:4, 5mm thick as 2nd layer wtih water proofing compund on stone masonry surfaces or surfaces other than fair face of brick or on concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L preparation of newly plastered or unplastered surfaces of wall surfaces and applying two coats of cement base paint over alkali resistant priming coat on walls upto 4th floor including cleaning window glasses, joinery, electric fittings, wiring etc of drops and splashes and cleaning premises clean and tidy complete all as specified and directed

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

S & F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S & F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws and including valleys and gutters complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with screws complete all as specified and directed.

S& F for aluminium anodised snap grid frame work for false ceiling for size of grid 605X605 mm including necessary notching and prepare holes, supporting hanger comprising of MS rod J bolts with frame work to ceiling and to the snap grid 12 mm thick half perforated low density particle board / tiles 60cm X60cm in size fixed with staples complete all as specified and directed.

M&L, Preparation of new surfaces of ceiling and applying two coats of Oil Bound Emulshion distemper over and including applying 2mm Birla white putty (as approved by GE) and to be applied only by the authorised applicater of manufacturers (as approved by GE) including cleaning window glasses, joinery, electric fittings, wiring etc of drops and splashes and cleaning premises clean and tidy complete all as specified and as directed complete all as specified and directed.

S&F Hand rails, half round or other stock section or core for wooden handrail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc, wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire mesh etc, flat iron fillets(for securing wire mesh etc) including all necessary drilling bolting or riveting etc, and similar work conforming to Fe 410-O or Fe 310-O complete all as specified and directed.

M/L for Point wiring with 1.5 sqmm single core PVC insulated and PVC unsheathed (FRLS) multistranded copper conductor cable 1100 volt grade concelled with PVC conduit enclosed in and with accessories fixed on surface on walls/ceiling by means of PVC sleeves Dash fastners and cadmium plated screws all as per ISI including sunk type boxes for mounting fitting like switches, socketes fan regulators with 3 mm thick phenolic Laminated sheet top covers concealed in walls etc including 1.5 Sqmm single core multi stranded copper conductor PVC insulated and unsheathed cable as earth continuity conductor to common earth dolly complete all as specified and directed for the following :-

(a) One light/fan point controlled by one way switch 6 amps.

(b) One 3 pin 5 Amps socket outlet on same board

One 3 pin 5 Amps socket outlet on independent board.

Description all as per item No.122.00 above but using 2.5 Sqmm PVC insulated, unsheathed copper conductor cable and earth conductor of 1.5sqmm copper cable for one 3 pin socket outlet 15 Amps on independent board.

M&L for concealed point wiring with PVC FRLS insulated multi stranded unsheathed cable 1.5 sqmm size with stranded copper conductor, 1100 volts grade conforming to IS-: 694 drawn in and including concealed PVC rigid conduits 20 mm dia incl cutting of chases for laying conduit after making good the surfaces as per existing surfaces or as directed with concealed sunk in pressed steel terminal boxes of 1.6mm thick factory made and painted with stove enameled black paint covered with 3mm thick plastic laminated sheet of required colour fixed with brass screws and cup washers including single core stranded copper conductor 1.5 sqmm PVC insulated unsheathed cable as earth wire to common earth and connected to earth dolly drawn in same concealed conduit complete all as specified for the following :-

One light/fan point controlled by one way switch 6 amps.

One 3 pin 5 Amps socket outlet on independent board.

Description all as per item No.123.00 above but using 2.5 Sqmm PVC insulated, unsheathed copper conductor cable and earth conductor of 1.5sqmm copper cable for one 3 pin socket outlet 15 Amps on independent board.

S&f switch piano flush type single pole one way 5 Amp 240 Volts.complete all as specified and directed

S&f switch piano flush type single pole one way 15 Amp 240 Volts.complete all as specified and directed

S/F socket out let 2 in 1, 3 pin, 5 Amps flush type 240 Volt.complete all as specified and directed

S/F ceiling rose surface bakelite three terminal 65 x 50 mm three terminal 250/230 volts ISI markedcomplete all as specified and directed

S/F socket outlet multipurpose 3 pin 5 and 15 Amp 2 in one flush typecomplete all as specified and directed

S&F MCB SPN DB 8 Way in the DBs complete all as specified and directed

S&F MCB in the DBs given below complete all as specified and directed

(a). MCB SP Isolater 6 to 40 Amp, 240 volts

(b). MCB SPN Isolater 32 to 63 Amp, 240 volts

M & L for sub main wiring using two single core10 Sqmm fire retardant PVC insulated and unsheathed cable with copper conductor 1100 volts grade ISI marked drawn through and including PVC Casing Caping/PVC Conduit or in concealed conduit (as required & directed by Engr-in-Charge) with accessories like bends, tee, etc fixed on wall and ceiling including6Sqmm earth wire, FR PVC insulated & unsheathed and connecting to earth dolly including taking down existing wiring complete all as specified and directed. Note: (i) Two runs of 10 sqmm and one run of 6 sqmm cable and one run of PVC conduit shall be measured as one RM. (ii) Necessary plastering in the disturbed surface of wall and distempering /white washing to match the existing colour shall deemed to be included in the unit rate quoted .

M & L for sub main wiring using two single core 4 Sqmm fire retardant PVC insulated and unsheathed cable with copper conductor 1100 volts grade ISI marked drawn through and including PVC Casing Caping/PVC Conduit or in concealed conduit (as required & directed by Engr-in-Charge) with accessories like bends, tee, etc fixed on wall and ceiling including 4 Sqmm earth wire, FR PVC insulated & unsheathed and connecting to earth dolly including taking down existing wiring complete all as specified and directed. Note: (i) Two runs of 4 sqmm and one run of 4 sqmm cable and one run of PVC conduit shall be measured as one RM. (ii) Necessary plastering in the disturbed surface of wall and distempering /white washing to match the existing colour shall deemed to be included in the unit rate quoted .

Supply and fix inreplacment bracket for security light made up of 25 mm dia, 1.6 mtr long GI pipe, light grade, bentto required length, fixed to wall eith 2 clamps made off 20x3 mm mild steel flat minimum 15 cm long, 4 nos 8 mm dia bolts with nut complete including taking down old unserviceable complete all as specified and directed

Supply and fixing LED security light luminaire 25 Watt freedom , pressure die cast aluminum housing, heat resistant glass, IP65 protection, better optics for uniform distribtion complete with all accessories internally pre wired and including connecting up with three core 1.5 sqmm flexible copper conductor cable from ceiling rose to connector of light complete all as specified and directed

S&F Ceiling fan 1200 mm sweep, BEE 5 star rating energy efficient with complete accessories and connecting to the point wiring with necessary felxible copper conductor cable of multistranded three core of suitable length from fan to the ceiling rose complete all as specified and directed.

Supply and fixing copper LED Tubelight fitting with battery/Inverter, ENERGY Efficient 22 Watt 2000 lumen bright light with 25000 burning hours complete all as specified and directed.

Supply and fixing industrial 3 phase plug top complete with one three phase MCB 32Amp completeall as specified and directed

Supply and fixing industrial 3 phase socket complete with one three phase MCB 32Amp completeall as specified and directed

S&F Recessed mounted back lit LED Luminaire 36 watt tile with highly translucent wide window opal diffuser and suitable for 600 x 600 mm with efficiency PMMA diffuser soft glare free light complete with drivers, holders LED lamp suitable for roof ceiling including connecting up with three core copper conductor cable of suitable size complete all as specified and directed.

S&F wall mountaing fan 400 mm sweep complete all as specified and directed.

S&F in repair of LED bulk head light fitting 10 watt complete all as specified and directed.

Supply, installation, testing & commissioning of hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and plasma filter for better indoor air quality of capacity 1.5 TR 230 volt AC 50 c/s of 5 star rating as comrising of the following:- (a) 1.5 Ton capacity using Eco friendly refrigernt cooling unit wall mounting type complete with remote control draining out arrangement manually adjustable cover for cool air from front with and inter connection with the condensing unit etc all as specified and directed by Engr-in-charge. (b) One No condensing unit of 1.5 ton capacity comprising of all fitting such as single phase electric driven compressor, condensing fan motor, condensor with fixing of stand on wall and all necessary controls and accessories all as specified and directed by Engr-in-charge. Note :- (i) (ii) Aditional length for copper tubing if required at site shall be supply and fix by the contractor without any extra cost. (iii) Rate of iron stand for out door unit included in item rate, no extra payment is made by department.

Supply & fix 20 Amp Industrial metal clad plug in socket and plug top with 20 amp SP MCB complete all as specified and directed.

M&L filling clean, dry and natural river sand in trenches for cushioning of cables to the full width of excavated trench 8 cm thick before laying the cable and 15 cm above the cable and gently punned down, complete all as specified and directed. Note :- Thickness of sand cushion after punning down (i.e 18 cm) shall be measured for payment.

Supply and fix concrete cable cover, Class LV, Type I, flat, size 250mm x 150mm x 40mmLV, flat, size complete all as specified and directed

S & F low density polyethylene pipes of pressure rating 6 kgf/square 50 mm bore with all fittings, fixing on wall /laid in trenches trenches for cable protection .

S&F factory made epoxy polyster powder coated distribution board TP&N 4 way (VTPN DB) with metal door (IP 43 Protection) fabricated from minimum 2.0 mm thick CRCA sheet and fixed on wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, standard DIN rail earth bar and cable ties for cable management, top and bottom removal gland plates with provn for DPX 100 4 pole MCCB/TPN and ELM as incomer and outgoing MCBs as required at site complete all as specified and directed. Note :- (a) MCCBs and MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be include under respective item of schedule. (b) All cable terminating into MCBs into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be included under respective item of sch.

S&F 4 pole MCCB 100 Amp, 50 Hz, 415 Volts with rupturing capacity 16 KA complete all as specified and directed. Make:Legrand/C&S/Seimens

M & L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.0 mm thick burried directly in ground earth pit not less than 2.25 mtr deep below ground level connected to & including galvanised earth lead wire 4 mm dia by means of nuts and bolt check nuts and washers of galvanised rion sheet all as shown in electrical plate Nos 5 of SSR Part - I and connected to earthing test point complete including testing filling of adquate quantity of charcoal dust and common salt including refilling earth and removal of surplus soil upto 50 mtrs PCC 1:3:6 type CI chamber precast RCC cover 40 mm thick reinforced with 6 mm dia MS bar 3 Nos both way with handle made out of 6 mm dia MS bar water pipe with wire mesh and connecting testing etc complete all as specified and directed.

Supply and laying & testing 35 sqmm 3.5 core XLPE cable PVC insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cable , (heavy duty), 1100 volts grade with stranded aluminium conductor complete all as specified and directed.

Gayatri Associates

Indobuildenterprise