GENERALAMC for street lights in Ottappalam muncipality 2024 25 AMC for street lights in Ottappalam muncipality 2024 25General Electrical Work

Amount

AMC for street lights

OD49143/2024-2025:Supply and renewing 1.50sqmm PVC insulated and PVC sheathed twin core Aluminium WP cable for street light fitting and holders including giving connection etc. complete

OD51324/2024-2025:Supply, installation, testing and commissioning of automatic on-off board using LDR including giving connection and all charges etc as required

OD49144/2024-2025:Supplying and renewing 200mm aluminium shade with new one including labour and conveyance charges.

OD49145/2024-2025:Supplying and renewing brass pendent holder with new one including labour and conveyance charges.

OD49146/2024-2025:Supplying and renewing 50w LED bulb B22 base with new one including labour and conveyance charges.

OD49162/2024-2025:Supplying and renewing 44w LED bulb B22 base with new one including labour and conveyance charges.

OD49147/2024-2025:Supplying and renewing 25w LED bulb B22 base with new one including labour and conveyance charges.

OD49148/2024-2025:Supplying and renewing 24w LED bulb B22 base with new one including labour and conveyance charges.

OD49150/2024-2025:Dismantling and renewing the defective LED Panel/PCB suitable for 24w/25W LED fittings and giving necessary connections including all charges.

OD49151/2024-2025:Dismantling and renewing the defective LED drive suitable for 44w/50W LED fittings and giving necessary connections including all charges.

OD49152/2024-2025:Dismantling the existing pendent holder,24W/ 25W LED bulb form the electric post repairing and replacing the bulb etc. on existing pole and giving connection.

OD49153/2024-2025:Labour charges for dismantling 22W CFL Street light fittings from the existing pole and cleaning, rewiring/ repairing & refitting the same on existing pole and giving connection.

OD49154/2024-2025:Dismantling the existing 24w/25w/40w/70w LED street light fitting from the KSEB electric post without any damage, repairing and refixing in the same position including labour and conveyance.

OD49155/2024-2025:Labour charges for dismantling 1x40w/2x40w fluorescent tube Street light fittings from the existing pole and cleaning, rewiring/ repairing & refitting the same on existing pole and giving connection.

OD55378/2024-2025:Maintenance of 100w flood light by disconnecting and lowering from the mini mast pole, repair/replace the drive unit and PCB, fixing back on top ring of 9m mini mast pole, giving connections, testing and commissioning etc. complete

OD55379/2024-2025:Maintenance of of 120/150w flood light by disconnecting and lowering from the mini mast pole, repair/replace the drive unit/PCB fixing back on top ring of 9metre pole, giving connections, testing and commissioning etc. complete

OD55381/2024-2025:Maintenance of 180/200w flood light by disconnecting from the ring of mini mast pole and lowering, repair/replace the drive unit/PCB, fixing back on top of 9metre pole ring, giving connections, testing and commissioning etc. complete

OD55382/2024-2025:Maintenance of the motor for the rising and lowering of flood lights and ring on high mast light, by disconnecting, lowering from the pole, repair/replace the motor, fixing back, giving connections, testing and commissioning etc. complete

90.15.4.7:Supply Conveyance, installation, testing and commissioning of 100W LED Flood light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing, acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer)

90.15.4.9:Supply Conveyance, installation, testing and commissioning of 150W LED Flood light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing, acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer)

90.15.4.10:Supply Conveyance, installation, testing and commissioning of 180W LED Flood light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing, acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer)

90.15.4.11:Supply Conveyance, installation, testing and commissioning of 200W LED Flood light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing, acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer)

2.10.1:Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole

2.10.3:Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Double pole

2.12.1:Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

2.13.1:Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

2.14.1:Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.25 amps

2.15.1:Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.25 amps

OD49166/2024-2025:Supplying and fixing 32 A, 2 Way neutral links mounted on DMC/SMC base with connections, in existing meter board.

OD49167/2024-2025:Supply and Fixing 32A Fuse base and fuse link in the existing panel board and giving connection including all labour charges.

OD49168/2024-2025:Supplying and Fixing 24 Hour timer for operating ON-OFF function in the existing MCB DB/enclosure with connection testing commissioning etc as required.

OD49169/2024-2025:Supplying and fixing 32A 2Pole AC1 Power contractor in the existing MCB DB/enclosure complete with connections, testing and commissioning etc.as required.

1.24.1:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps switch

1.27.1:Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.1 or 2 Module (75mmX75mm)

OD51414/2024-2025:Supply & installation of dust and vermin proof, 1 Phase Sintex Meter Board (GSMB- 3525 (350x250x150) including providing and fixing 32 A HRC Fuse Base with HRC Fuse link ,32 A neutral link and to fix KSEB meters, etc. as required including fixing it on wall, making good the damages color washing etc. as required.

OD51415/2024-2025:Supply & installation of dust and vermin proof, 3 Phase Sintex Meter Board( GS-MB- 5628 (515 x 240 x145) including providing and fixing 3 Nos. 32/40 A HRC Fuse Base with HRC Fuse link ,32/40 A neutral link and to fix KSEB meters, etc as required including fixing it on wall, making good the damages color washing etc.as required.

ARUN.C.S

Bidder Name

RAMAN.V

ARUN.C.S