REPAIR TO ROOF GI PIPE AND OTHER MISC WORK TO MD ACCN AT PALAMPUR MIL STN

Amount

Demolition of brickwork or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facing, dressed stone work precast concrete articles complete all as specified and directed.

Demolition of concrete of any description and in any position not otherwise specifically provided such in sunken porition/padding/roof slab complete all as specified and directed.

M&L PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

M&L brick work with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius built in Cement mortar 1:6, complete all as specified and directed.

Dismantling of old rested plain or corrugated steel sheeting, any gauge, thickness,including Nainital or similar pattern roof covering etc. complete all as specified and as directed.

S&F 0.63mm Galvanised,corrugated mild steel sheeting with two corrugations side lap,fixed with L-type or J-type or cranked hook bolts and washers in roofs,walls etc. with grade of zinc coating 275 complete all as specified and directed.

All as per item No. 6 above but except sheeting any thickness.

S&F 0.80 mm in thickness plain, galvanised, mild steel sheeting, in ridges, hips valley gutters,drip and straight flashings ( length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified, compete all as specified and directed. (Colour as approved by GE)

M&L pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, facia and fixed with self tapping screws as specified. (Colour as approved by GE)

Dismantling of wall & ceiling boards (fiber, pulp, insulation etc) or insulation boards /slabs /blankets any thickness, including cover fillets complete all as specified and directed.

Dismantling timber scantlings 40Sq.cm and over in section, in any position complete all as specified and directed.

M&L 2nd class hard wood timber scantling clean sawn fixed for unframed work complete all as specified and directed.

M&L 4mm thick non asbestos cement plain building boards, fixed to timber framework with screws as in ceiling flat or sloping complete as specified and directed.

M&L 2nd class soft wood rail as in scantling clean sawn timberb fixed including preparation and applying one coat black bituminious paint complete all as specified and directed.

M&L for plain fillets, square rectangular or triangular in section, wrought, bull nosed, splayed, chamfered or rounded on one edge or face, secured with nails or brad, 2nd class soft wood (kail) sec area exc 3 sqcm but not exc 6 sqcm as in cover fillets, complete all as specified and directed.

S&F anodised aluminium snap grid frame work (size of grid 605mm x 605mm) for false ceiling all as specified in clause 10.38.1 on srl Page No. 216 of SSR Part-I 2009, including necessary scaffolding complete all as specified and directed.

S&F E ceiling board 4mm thick of size 600x600mm decorative face on both side fixed or laid inserted to timber/GI/Aluminium frame work with nails in ceiling complete all as specified and directed.

S&F in repairs 500 ltr rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe including dismantling existing unserviceable water tank (any description) complete all as specified and directed.

Disconnecting existing tanks, 250/500/1000 litres of capacity, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including cleaning and removing all scale and dirt,etc,from tanks and from moulds of circulating pipe,etc complete all as specified and directed

S&F in repairs ball brass valves, high pressure, with polythene float and fly nut complete, screwed for 20 mm bore iron pipe or brass ferrule complete all as specified & directed.

S&F in repairs 20mm bore gun meteal globe or gate valve cast copper alloy, screwed down, high pressure with cruth or butterfly handle screwed both ends for iron pipe or for union complete all as specified and directed.

Taking down chowkhats or frame with shutters (without taking off shutters from frames) area not exc 1.50 sqm each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.) complete all as specified and directed.

S&F, solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, supplying and fixing in opening as per specifications & directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat molded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement complete all as specified & directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding and backing coat, and removing unserviceable materials,debris and rubbish to distance not exceeding 100m complete all as specified and directed.

M&L Non-skid, coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.06 sqm but not exc 0.11 sqm as in floors etc laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:6, set and jointed in neat cement slurry and pointed with white or coloured cement to match the colour of tiles complete all as specified and directed.

M&L Glazed ceramic coloured tiles in vertical surface 350mm x 250mm x 7mm/450mm x 350mm x 7mm/450x300x7mm/600x300x7mm thick set and jointed in neat cement slurry, pointed in white or coloured cement to match the colour of tiles, over and including 10mm thick backing coat in CM 1:4 to receive tiles, complete all as specified and directed.

M&L Non-skid, coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.18 sqm but not exc 0.36 sqm as in floors etc laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:4, set and jointed in neat cement slurry and pointed with white or coloured cement to match the colour of tiles complete all as specified and directed.

S&F 150 mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 150 mm size (length of bolt) aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F 100 mm size aluminium butt hinges,extruded aluminium alloy with galvanised mild steel hinge pin ,anodised, type B-21 complete all as specified and directed.

Taking up or down 15mm bore steel water tubing and connections including cleaning for re-fixing, complete all as specified and directed.

Taking up or down 20mm bore steel water tubing and connections including cleaning for re-fixing, complete all as specified and directed.

S&F steel water tubing, 15mm bore, galvanised, "medium grade" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor, complete all as specifed.

S&F steel water tubing, 20mm bore, galvanised, "medium grade" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor, complete all as specifed.

Fixing only GI steel water tubing 15mm bore with all fittings complete all as specified and directed.

Fixing only GI steel water tubing 20mm bore with all fittings complete all as specified and directed.

S&F in repairs 10 litre capacity PVC, low level, valveless, syphonic action type flushing cistern, inlet ball valve, float valve, handle and fixing arrangement, 32 mm dia PVC flushing pipe and 15mm dia 600mm long PVC connection with CP brass coupling nuts and PVC washer at both ends, complete all as specified and directed.

S&F in repair vitreous china squatting pan water closet, orissa pattern, size 580 x 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including cast iron 'P' or 'S' trap, provn of lime concrete and jointing to flush pipe, complete all as specified and directed.

S&F in repairs vitreous china water closet pan (pedestal pattern), white including fixing bolts etc including plastic water closet seat, black/white closed pattern with flat bottom and cover and mild steel chromium plated hinging device complete all as specified and directed.

S&F in repairs health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and SBS wall hook including making connections and fixed in position complete all as specified and directed.

S&F in repairs plastic water closet seat, black or white colsed pattern with flat bottom and cover and mild steel chromium plated hinging device complete all as specified and directed.

S&F in repairs stop valve/angle valve, cast copper alloy, fancy type,chromium plated, screwed down, high pressure, with quater turn flange, screwed both ends for 15 mm bore iron pipe or for union complete all as specified & directed by Engineer-in-charge.

S&F in repairs, fancy type, chromium plated, bib tap, cast copper alloy with crutch or butterfly handle, screwed down, screwed for 15 mm bore iron pipe or for brass ferrule complete all as specified & directed by Engineer-in-charge.

S&F in repair pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for 15 mm bore iron pipe complete all as specified & directed.

S&F in repairs vitreous China wash basin, white, flat back, size 580 x 450mm including union and brackets but incl waste pipe, chain and plug and porcelain stopper complete all as specified and directed.

S&F in repairs PVC connection 15mm size, 450 mm long with PTMT nuts complete all as specified and directed.

S&F in repairs 32mm PVC waste pipe to WHB, sink etc complete all as specified and directed.

Taking down cement plaster of any description on brick or stone or cement concrete block walls etc including raking out joints, hacking for key, scrubbing down with water etc, and removal of rubbish off the premises and leave the work clear of any plastering complete all as specified and directed.

M&L rendering 15mm thick plaster in cement mortar(1:6) on stone masonry wall surfaces or surfaces other than fair faces of brick work or one side of lathing, finished even and smooth without suing extra cement complete all as specified and directed.

All as per item No. 51 above but 15mm thick plaster in CM 1:4 on external surfaces of wall.

M&L 10mm thick plaster in CM 1:4 on ceiling all as specified and directed finished even and smooth without using extra cement complete all as specified and directed.

M&L preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over chalk white complete all as specified and directed.

M&L preparation of new plastered surfaces of wall and applying two coats of cement base paint over one coat of white wash complete all as specified and directed.

M&L preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L preparation of old plastered/unplastered wall surface including brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc incl putty work where required and applying one coat of distemper oil emulsion with sponge rollers, complete all as specified and directed.

M&L preparation of old plastered/unplastered ceiling surface including brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying one coat of white washing, complete all as specified and directed.

Demolition or breaking up AC/PVC/CI rain water/SWR pipe set in cement mortar 100-110mm dia complete all as specified and directed.

All as per item No. 59 above but 75mm bore pipe.

S&F in repairs 110mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joints, fixed to walls with stack clamps,complete all as specified and directed.

S&F in repairs 110mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joints, as in floor and trenches complete all as specified and directed.

S&F in repairs 75mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joints, fixed to walls with stack clamps,complete all as specified and directed.

S&F in repairs 75mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joints, as in floor and trenches complete all as specified and directed.

S&F 110mm bore, PVC (SWR) junction, (single T) equal or unequal complete all as specified.

S&F 75mm bore PVC (SWR) junction, (single T) equal or unequal ,complete all as specified and directed.

M&L 75 mm size cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B-1 complete including taking down old unserviceable floor trap complete all as specified & directed.

S&F 75mm bore PVC (SWR) bends complete all as specified and directed.

Taking down existing water proofing treatment including cement plaster and cleaning with wire brushes roughening the surface and hacking out dirt, as directed and disposasl of rubbish not exc 50mm distance from starting point complete all as specified and directed.

M&L 15mm thick (average) screed bed/plaster in cement mortar 1:4 in order to maintain proper slope and base over existing roof surface for laying of APP based polymeric membrane, mixed with water proofing compound as per manufacturer instructions finished even and smooth without using extra cement complete all as specified and directed. (Note:- WPC and polymeric memebrane shall be measured and paid separately)

M&L applying a cost of bitumen primer conforming to IS: 3384-1986 over plastered surfaces of roof slab @ 0.40 litres/Sqm of density 0.87-0.89 Kg/litres at 25º C and viscosity 70-160CPS (bitumen primer shall be of same make as of membrane) including preparation of surfaces, complete all as specified and directed.

M&L APP (Atactic Poly-propylene polymer) modified membranes over roof slab, five layered, 3mm thick weighing not less than 3.6 Kg/Sqm, having a centre core of polyester non-woven mat (FP) reinforcement dipped into APP modified mix and sealing all the over laps 75mm on length side and 100mm on width side of membranes by torching as per manufacturer's instructions by authorised applicator only after applying evenly a coat of bitumen VG-10 grade @ 1.20 Kg per sqm on the bottom of APP and on top of joints of APP complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed.

M&L 15mm thick (average) screed bed/plaster in cement mortar 1:4 in order to maintain proper slope and base in sunken portion of WC & floor trap for surface for laying of APP based polymeric membrane, mixed with water proofing compound as per manufacturer instructions finished even and smooth without using extra cement complete all as specified and directed. (Note:- WPC and polymeric memebrane shall be measured and paid separately)

M&L applying a cost of bitumen primer conforming to IS: 3384-1986 over plastered surfaces of sunken slab @ 0.40 litres/Sqm of density 0.87-0.89 Kg/litres at 25º C and viscosity 70-160CPS (bitumen primer shall be of same make as of membrane) including preparation of surfaces, complete all as specified and directed.

M&L APP (Atactic Poly-propylene polymer) modified membranes in sunken slab of WC & floor trap, five layered, 3mm thick weighing not less than 3.6 Kg/Sqm, having a centre core of polyester non-woven mat (FP) reinforcement dipped into APP modified mix and sealing all the over laps 75mm on length side and 100mm on width side of membranes by torching as per manufacturer's instructions by authorised applicator only after applying evenly a coat of bitumen VG-10 grade @ 1.20 Kg per sqm on the bottom of APP and on top of joints of APP complete all as specified and directed.

M/s ASS Construction Co