Work of ARC for Erection & Maintenance of HT/LT Line and TC work and other maintenance work O/H & UG XLPE Cable & Laying of underground cable network with terminations in the area of DGVCL under All scheme for All Sub division under Rander Division.

Schedule-B for Work of ARC for Erection & Maintenance of HT/LT Line and TC work and other

maintenance work O/H & UG XLPE Cable & Laying of underground cable network with terminations in

the area of DGVCL under All scheme for All Sub division under Rander Division.

Part- A- HT,LT& TC WORK & O/H UG XLPE Cable

CAPITAL WORK LABOUR RATES FOR FY 2024-25 (WITHOUT GST)

Item Code Item Unit FY 2024-25

HT TAPPING FROM THE EXISTING POLE

INCLUDING FIXING OF CROSS ARMS,

CLAMPS ANTI-CLIMBING DEVICES, DANGER

BOARD, INSULATORS ETC. COMPLETE AND

1 9926000001 PAINTING OF FABRICATED MATERIALS AND No.

NUMBERING COMPLETE WITH COST OF

PAINTS AS PER STANDARD SPECIFICATION

BUT EXCLUDING ERECTION OF GUY SET

ERECTION OF PSC POLES OF 8 *200 KG

INCLUDING EXCAVATION OF PIT AND

REFILLING OF EARTH, FIXING OFCROSS

ARMS, TOP FITTING CLAMPS ANTI-

CLIMBING DEVICES, INSULATORS ETC.

2 9926000002 COMPLETE AND PAINTING OF FABRICATED No.

MATERIALS USED ON THE POLES AND

NUMBERING WITH COST OF PAINT AS PER

STANDARD SPECIFICATION BUT

EXCLUDING ERECTION OF GUY SET AND

ERECTION OF STEEL POLES OF 9 TO

METERS INCLUDING EXCAVATION OF PIT

AND REFILLING OF EARTH, FIXING

OFCROSS ARMS, TOP FITTING CLAMPS

ANTI-CLIMBING DEVICES, DANGER BOARD,

INSULATORS ETC. COMPLETE AND

PAINTING OF STEEL POLE, FABRICATED

MATERIALS USED ON THE POLEAND

NUMBERING WITH COST OF PAINT AS PER

STANDARD SPECIFICATION BUT

EXCLUDING ERECTION OF GUY SET AND

ERECTION OF STEEL POLE OF 13 METERS

FOR RAILWAY CROSSING ON BG/MG/NG

LINE FOR 0.400/11/22KV OVERHEAD LINES

I.E INCLUDING EXCAVATION OF PIT &

REFILLING OF EARTH, FIXING CROSS ARMS,

TOP FITTING CLAMPS,ANTI-CLIMBING

4 9926000004 DEVICES DANGER BOARD, INSULATORS No.

ETC. COMPLETE AND PAINTING OF STEEL

POLES, FABRICATED MATERIALS USED ON

THE POLES AND NUMBERING WITH COSTOF

PAINT AS PER STANDARD SPECIFICATION

BUT EXCLUDING ERECTION OF GUY SETS

ERECTION OF DOUBLE POLE STRUCTURE

OF 8 METERS 200 KG PSC POLES

INCLUDING EXCAVATION OF PITS &

REFILLING OF EARTHING, FIXING OF

CHANNELS, SUPPORTING ANGLES,CLAMPS,

ANTI-CLIMBING DEVICES DANGER

5 9926000005 BOARDS,INSULATORS ETC.COMPLETE AND No.

PAINTING OF FABRICATED MATERIALS

USED ON THE POLES AND NUMBERING

WITH COST OF PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDING ERECTION

OF GUY SETS AND EARTHING.(WITHOUT AB

ERECTION OF DOUBLE POLE STRUCTURE

OF 9 TO 11 METERS.STEEL POLE

INCLUDING EXCAVATION OF PITS &

REFILLING OFEARTH, FIXING OF

CHANNELS, SUPPORTING ANGLES,

CLAMPS,ANTI-CLIMBING DEVICES DANGER

6 9926000006 BOARDS, INSULATORS ETC.COMPLETE & No.

PAINTING OF POLES,FABRICATED

MATERIALSUSED ON THE POLES AND

NUMBERING WITH COST OF PAINTSAS PER

STANDARD SPECIFICATION BUT

EXCLUDING ERECTION OF GUY SET AND

EARTHING.(WITHOUT AB SWITCH)

ERECTION OF DOUBLE POLE STRUCTURE

WITH MOUNTING OF AB SWITCH, HG FUSES

OF 8 MTRS 200 KG PSC POLES INCLUDING

EXCAVATION OF PITS AND REFILLING OF

EARTH,FIXING OF CHANNELS SUPPORTING

ANGLES, CLAMPS, ANTI-CLIMBING DEVICES,

7 9926000007 DANGER BOARDS, INSULATORS,DOFUSES No.

ETC. COMPLETE AND PAINTING OF

FABRICATED MATERIALS USED ON THE

POLES AND NUMBERING WITH COSTOF

PAINT AS PER STANDARD SPECIFICATION

BUT EXCLUDINGOF ERECTION OF GUY SET

AND EARTHING.(WITH AB SWITCH)

ERECTION OF DOUBLE POLE STRUCTURE

WITH MOUNTING OF AB SWITCH,HG FUSES,

9 TO 11 METERS STEEL POLES INCLUDING

EXCAVATION OF PITS AND REFILLING OF

EARTH, FIXING OFCHANNEL, SUPPORTING

ANGLES, CLAMPS, ANTI-CLIMBING DEVICES

8 9926000008 , DANGER BOARDS, INSULATORS, ETC. No.

COMPLETE AND PAINTING OF POLES

FABRICATED MATERIALS USED ON THE

POLES AND NUMBERING WITH COST OF

PAINT AS PER STANDARD SPECIFICATION

BUT EXCLUDING ERECTION OF GUY SET

AND EARTHING.(WITH AB SWITCH)

ERECTION OF DOUBLE POLE STRUCTURES

WITH MOUNTING OFAB SWITCH, HG

FUSES, TRANSFORMERS, LIGHTENING

ARRESTORS, DISTRIBUTION BOX. OF

METER,200KG PSC POLE METERS POLES

INCLUDING EXCAVATION OF PITS AND

REFILLING OF EARTH, CARTING OF

TRANSFORMERS FROMSTORES TO SITE,

FIXING OF CHANNELS, SUPPORTING

ANGLES,BRACINGS CROSS ARMS CLAMPS,

ANTICLIMBING DEVICES DANGER BOARDS,

CONDUCTOR AND CABLE WIRING

ETC.COMPLETE AND PAINTING OF

FABRICATED MATERIALS USEDON THE

POLES AND NUMBERING WITH COST OF

PAINT AS PER STANDARD SPECIFICATION

BUT EXCLUDING ERECTION OF GUY SETS

ERECTION OF DOUBLE POLE STRUCTURE

WITH MOUNTING OF AB SWITCH,HG FUSES

TRANSFORMERS, LIGHTENING

ARRESTORS, DISTRIBUTION BOX 9 TO

METERS STEEL POLES INCLUDING

EXCAVATION OF PITS & REFILLING OF

EARTH CARTING OF TRANSFORMERS FROM

STORE TO SITE, FIXINGOF CHANNELS

10 9926000010 SUPPORTING ANGLES, BRACING, CROSS No.

ARMS,CLAMPS, ANTICLIMBING DEVICES,

DANGER BOARDS,CONDUCTOR AND CABLE

WIRING ETC. COMPLETE AND PAINTING OF

POLES FABRICATED MATERIALS USED ON

THE POLES AND NUMBERING AS PER

STANDARD SPECIFICATION BUT

EXCLUDING ERECTIONS OF GUY SETS AND

ERECTION OF GUY SET INCLUDING

EXCAVATION OF PITS & REFILLING OF

EARTH AS PER STANDARD SPECIFICATION

11 9926000011 WITH STAY CLAMPS, STAY WIRE, ANCHOR No.

ROD, TURN BUCKLE, EYEBOLT, GUY

INSULATOR, CEMENT CONCRETE BLOCK

ETC. BUT EXCLUDING CONCRETING.

CONCRETING OF POLES, GUYS, ETC.

INCLUDING COST OF CEMENT SAND METAL

12 9926000012 (1:2:4) AND WATER ETC. AS PER STANDARD CMT

SPECIFICATION.(cement Should be 53 grade)

used for Concreting.

ERECTION OF COIL TYPE EARTHING

INCLUDING COST OF COAL,SALT ETC. BUT

13 9926000013 WITHOUT COST OF GI WIRE AS PER No.

STANDARD SPECIFICATION(20kg solt+20kg

ERECTION OF GI PIPE/CI PLATE TYPE

EARTHING INCLUDINGCOST OF COAL SALT

14 9926000014 ETC. BUT WITHOUT COST OF PIPE/GIPLATE No.

GI WIRE AS PER STANDARD

SPECIFICATION.(20kg solt+20kg coal)

ERECTION OF STREET LIGHT FIXTURE

COMPLETE WITH CLAMPS, BRASS NIPPLE,

BRASS HOLDER TECK WOOD

BUSH,REFLECTORS FUSE, WIRING ETC. AS

PER STANDARD SPECIFICATION BUT

EXCLUDING COST OF MATERIALS.

STRINGING OF(30mm2)ACSR/34MM@,55MM2

AAA CONDUCTOR for ALL TYPE OF

16 9926000016 CONDUCTOR (EXCEPT DOG CONDUCTOR)

FOR 11/22KV & LT LINES INCLUDING FIXING

OF INSULATORS, BINDING JUMPERING ETC.

STRINGING OF GI WIRE 8 SWG INCLUDING

BINDING JUMPERING ETC.

PROVIDING SINGLE PHASE SERVICE

CONNECTION WITH PVC 2.5/4MM2 TWIN

CORE CABLE FROM TERMINAL POLE TO

18 9926000018 METERING POINT INCLUDING FIXING OF No.

METER WITH METER EARTHING COMPLETE

WORK AS PER STANDARD SPECIFICATION

BUT EXCLUDING COST OF MATERIALS.

PROVIDING THREE PHASE 4 WIRE SERVICE

CONNECTION WITH PVC 4MM2/10MM2 FOUR

CORE CABLE FROM TERMINAL POLE TO

19 9926000019 METERING POINT INCLUDING FIXING OF No.

METER WITH METER EARTHING COMPLETE

WORK AS PER STANDARD SPECIFICATION

BUT EXCLUDING COST OF MATERIALS.

ADDITIONAL COST FOR EXCAVATION OF PIT

IN HARD ROCK AREA FOR ERECTION OF

POLE/ GUY ETC. AS PER STANDARD

SPECIFICATION OVER & ABOVE NORMAL

20 9926000020 COST COVERED AGAINST EXCAVATION OF No.

PIT UNDER NORMAL SOIL FOR ERECTION

OF POLE,GUY, DOUBLE POLE STRUCTURE

EARTHING WITH THE APPROVAL OF

SUPDT.ENGINEER.

PROVIDING GUARDING TO HT LINE ON

ROAD/ RAIL CROSSING.

PROVIDING GUARDING OF LT LINES ON

ROAD/RAIL CROSSING.

23 9926000023 LT LINE TAPPING- SINGLE PHASE No.

24 9926000024 LT LINE TAPPING- THREE PHASE No.

Stringing/LAYING OF OVER HEAD LT CABLE

FOR ROAD CROSSING,HT LINE CROSSING

AND TELEPHONE LINE CROSSING ETC.(PER

ERECTION OF SINGLE POLE STRUCTURES

WITH , HG FUSES,TRANSFORMERS,

LIGHTENING ARRESTOR, DISTRIBUTION

BOX. ON 8 METERS 200 KGAND PSC POLE

INCLUDING EXCAVATION OF PITS AND

REFILLING OF EARTH, CARTING OF

TRANSFORMERS FROM STORES TO SITE,

FIXING OF CHANNELS, SUPPORTING

26 9926000026 ANGLES,BRACINGS CROSS ARMS CLAMPS, No.

ANTICLIMBING DEVICES DANGER BOARDS,

CONDUCTOR AND CABLE WIRING

ETC.COMPLETE AND PAINTING OF

FABRICATED MATERIALS USED ON THE

POLE AND NUMBERING WITH COST OF

PAINT AS PER STANDARD SPECIFICATION

BUT EXCLUDING ERECTION OFGUY SETS

ERECTION OF SINGLE POLE STRUCTURES

WITH MOUNTING OFAB SWITCH , HG

FUSES,TRANSFORMERS,

LIGHTENINGARRESTOR, DISTRIBUTION

BOX. ON 9 to 11 METERS RSJ POLE

INCLUDING EXCAVATION OF PITS AND

REFILLING OF EARTH, CARTING OF

TRANSFORMERS FROM STORES TO SITE,

FIXING OF CHANNELS, SUPPORTING

ANGLES,BRACINGS CROSS ARMS CLAMPS,

ANTICLIMBING DEVICES DANGER BOARDS,

CONDUCTOR AND CABLE WIRING

ETC.COMPLETE AND PAINTING OF

FABRICATED MATERIALS USED ON THE

POLE AND NUMBERING WITH COST OF

PAINT AS PER STANDARD SPECIFICATION

BUT EXCLUDING ERECTION OFGUY SETS

ERECTION OF PSC POLES OF 10 *270 KG

INCLUDING EXCAVATION OF PIT AND

REFILLING OF EARTH, FIXING OF CROSS

ARMS, TOP FITTING CLAMPS ANTI-

CLIMBING DEVICES, INSULATORS ETC.

28 9926000028 COMPLETE AND PAINTING OF FABRICATED No.

MATERIALS USED ON THE POLES AND

NUMBERING WITH COST OF PAINT AS PER

STANDARD SPECIFICATION BUT

EXCLUDING ERECTION OF GUY SET AND

ERECTION OF DOUBLE POLE STRUCTURE

OF 10 METERS 270 KG PSC POLES

INCLUDING EXCAVATION OF PITS &

REFILLING OF EARTHING, FIXING OF

CHANNELS, SUPPORTING ANGLES,CLAMPS,

ANTI-CLIMBING DEVICES DANGER

29 9926000029 BOARDS,INSULATORS ETC.COMPLETE AND No.

PAINTING OF FABRICATED MATERIALS

USED ON THE POLES AND NUMBERING

WITH COST OF PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDING ERECTION

OF GUY SETS AND EARTHING.(WITHOUT AB

STRINGING OF 100MM2 ACSR/100MM2 AAAC

CONDUCTOR FOR 11/22KV & LT LINES ONE COND PER

INCLUDING FIXING OFINSULATORS, KM

BINDING JUMPERING ETC.

STRINGING OF DOG CONDUCTOR FOR

31 9926000031 11/22KV & HT LINES INCLUDING FIXING OF

INSULATORS, BINDING JUMPERING ETC.

ERECTION OF DOUBLE POLE STRUCTURES

WITH MOUNTING OF AB SWITCH, HG

FUSES, TRANSFORMERS, LIGHTENING

ARRESTORS, DISTRIBUTION BOX. OF

METERS 270 KGAND PSC POLES INCLUDING

EXCAVATION OF PITS AND REFILLING OF

EARTH, CARTING OF TRANSFORMERS

FROMSTORES TO SITE, FIXING OF

CHANNELS, SUPPORTING

ANGLES,BRACINGS CROSS ARMS CLAMPS,

ANTI-CLIMBING DEVICES,DANGER BOARDS,

CONDUCTOR AND CABLE WIRING

ETC.COMPLETE AND PAINTING OF

FABRICATED MATERIALS USED ON THE

POLES AND NUMBERING WITH COST OF

PAINT AS PER STANDARD SPECIFICATION

BUT EXCLUDING ERECTION OF GUY SETS

DISMENTALLING OF 8 MTR PSC POLE WITH

CREDITING OF FABRICATION AT STORE &

STACKING OF POLE SAFELY ON ROAD SIDE

OR CREDITING TO DEPARTMENTAL STORE

DISMENTALLING OF 10 MTR PSC POLE WITH

CREDITING OF FABRICATION AT STORE &

STACKING OF POLE SAFELY ON ROAD SIDE

OR CREDITING TO DEPARTMENTAL STORE

DISMENTALLING OF TRANSFORMER

CENTRE (8 MTR PSC POLE) (WITH

TRANSFORMER) WITH CREDITING OF

35 9926000035 FABRICATION & TRANSFORMER AT STORE No.

& STACKING OF POLE SAFELY ON ROAD

SIDE OR CREDITING TO DEPARTMENTAL

DISMENTALLING OF TRANSFORMER

CENTRE (8 MTR PSC POLE) (WITHOUT

TRANSFORMER) WITH CREDITING OF

FABRICATION AT STORE & STACKING OF

POLE SAFELY ON ROAD SIDE OR

CREDITING TO DEPARTMENTAL STORE

STRINGING OF LT ABC OF 1*35 SQ MM +

1*25 SQ MM INCLUDING FITTING OF ALL

ACESSARIES I.E. SPECIAL DESIGN

SUSPENSION / TENSION CLAMP, FIXING OF

CROSS ARM, LT SHACKLE INSULATOR ETC.

FOR FIXING OF MESSENGER WIRE AND TO

PROVIDE SERVICE CONNECTION ON

AERIAL BUNCH CABLE BY INSULATED

PIERCEING CONNECTORS THROUGH

SERVICE CONNECTION BOX COMPLETE AS

REQUIRED & DIRECTED BY ENGINEER IN

STRINGING OF LT ABC OF 3*50 SQ MM +1*25

SQ MM+1*35 SQ MM INCLUDING FITTING OF

ALL ACESSARIES I.E. SPECIAL DESIGN

SUSPENSION / TENSION CLAMP, FIXING OF

38 9926000038 CROSS ARM, LT SHACKLE INSULATOR ETC. KM

FOR FIXING OF MESSENGER WIRE AND TO

PROVIDE SERVICE CONNECTION ON

AERIAL BUNCH CABLE BY INSULATED

PIERCEING CONNECTORS THROUGH

SERVICE CONNECTION BOX COMPLETE AS

REQUIRED & DIRECTED BY ENGINEER IN

STRINGING OF 11KV ABC OF 3*95 SQ MM

+80 SQ MM INCLUDING FITTING OF ALL

ACESSARIES I.E. SPECIAL DESIGN

SUSPENSION / TENSION CLAMP, FIXING OF

CROSS ARM, BINDING TO PIN

INSULATOR,PREPARING SHACKLE

POINT,JUMPERS ETC. AS REQUIRED &

DIRECTED BY ENGINEER IN CHARGE

STRINGING OF 22 KV ABC OF 3*70 SQ MM

+95 SQ MM INCLUDING FITTING OF ALL

ACESSARIES I.E. SPECIAL DESIGN

SUSPENSION / TENSION CLAMP, FIXING OF

CROSS ARM, BINDING TO PIN

INSULATOR,PREPARING SHACKLE

POINT,JUMPERS ETC. AS REQUIRED AND

DIRECTED BY ENGINEER IN CHARGE

STRINGING OF LT ABC OF 2*50 SQ MM +1*25

SQ MM+ 35 SQ MM INCLUDING FITTING OF

ALL ACESSARIES I.E. SPECIAL DESIGN

SUSPENSION / TENSION CLAMP, FIXING OF

CROSS ARM, LT SHACKLE INSULATOR ETC.

FOR FIXING OF MESSENGER WIRE AND TO

PROVIDE SERVICE CONNECTION ON

AERIAL BUNCH CABLE BY INSULATED

PIERCEING CONNECTORS THROUGH

SERVICE CONNECTION BOX COMPLETE AS

REQUIRED & DIRECTED BY ENGINEER IN

DISMENTALING OF RSJ (9/11 METER) POLE

42 9926000042 AND CREDITING THE OLD MATERIAL TO No.

DISMENTALING OF TRANSFORMER

CENTER ON 10MTR,270KG PSC

POLE(WITHOUT TRANSFORMER) WITH

43 9926000043 CREDITING OF FABRICATION AT STORE No.

AND STACKING OF POLE SAFELY ON ROAD

SIDE OR CREDITING TO DEPARTMENTAL

DISMENTALING OF TRANSFORMER

CENTER ON 10MTR,270KG PSC POLE(WITH

TRANSFORMER) WITH CREDITING OF

FABRICATION AT STORE AND STACKING OF

POLE SAFELY ON ROAD SIDE OR

CREDITING TO DEPARTMENTAL STORE

DISMENTLING OF 11KV ABC OF 3*95 SQ MM

+80 SQ MM AND CREDITING FITTING OF

ALL ACESSARIES AND FABRICATION TO

DEPARTMENTAL STORE

DISMENTLING OF 22 KV ABC OF 3*70 SQ

MM +95 SQ MM AND CREDITING FITTING

OF ALL ACESSARIES AND FABRICATION TO

DEPARTMENTAL STORE

DISMENTALING OF LT ABC OF 1*35 SQ MM +

1*25 SQ MM AND CREDITING FITTING OF

ALL ACESSARIES TO DEPARTMENTAL

DISMENTALING OF LT ABC OF 3*50 SQ MM

+1*25 SQ MM+1*35 SQ MM AND CREDITING

FITTING OF ALL ACESSARIES TO

DEPARTMENTAL STORE.

DISMENTALING OF LT ABC OF 2*50 SQ MM

+1*25 SQ MM+ 35 SQ MM AND CREDITING

FITTING OF ALL ACESSARIES TO

DEPARTMENTAL STORE.

RESTRINGING OF ALL TYPE OF

CONDUCTOR (EXCEPT DOG CONDUCTOR) ONE COND PER

FOR 11/22KV & LT LINES INCLUDING FIXING KM

OF INSULATORS, BINDING JUMPERING ETC.

RESTRINGING OF DOG CONDUCTOR FOR

51 9926000051 11/22KV HT LINES INCLUDING , BINDING

LABOUR CHARGE FOR THE INSTALLATION

52 9926000052 OF NEW DTR METER. (METER WILL BE No.

PROVIDED BY DGVCL)

LABOUR CHARGE FOR THE REPLACEMENT

OF DTR METER AND OLD METER SHOULD

BE CREDITED TO SDN STORE. (METER WILL

BE PROVIDED BY DGVCL)

LABOUR CHARGE FOR PROVIDING CT COIL

54 9926000054 FOR DTR METER CONNECTION. (CT COIL PER CT

WILL BE PROVIDED BY DGVCL)

LABOUR CHARGE FOR REPLACEMENT OF

CT COIL FOR DTR METER CONNECTION

55 9926000055 AND OLD CT SHOULD BE CREDITED TO SDN PER CT

STORE. (CT COIL WILL BE PROVIDED BY

LABOUR CHARGE FOR FIXING OF MMB FOR

56 9926000056 DTR METER (MMB WILL BE PROVIDED BY No.

LABOUR CHARGE FOR REPLACEMENT OF

57 9926000057 DTR METER BOX. (METER WILL BE No.

PROVIDED BY DGVCL)

PROVIDING / REPLACEMENT OF 1.5 SQ MM

58 9926000058 10 CORE COPPER CABLE 3.5 METER (CABLE No.

TO BE PROVIDED BY AGENCY)

LABOUR CHARGE FOR

PROVIDING/RECONNECTION OF TERMINAL PER

CONNECTION WITH PROPER SIZE OF LUGS. TERMINATION

(LUGS COST IS BORNE BY AGENCY)

LABOUR CHARGE FOR THE SPOT READING

OF DTR METER WITH DETAIL SURVEY OF

DEFECT IF ANY. A DULY SIGN COPY BY

SURVEYOR PERSON OF AGENCY IN PRO-

60 9926000060 FORMA REPORT SHOULD BE SUBMITTED PER DTR

TO SDN OFFICE.(* ONLY IF ALL PARAMETER

OF VOLTAGE, CURRENT & LOAD AS SHOWN

IN PER-FORMA IS FILLED) AS PER THE

INSTRUCTION OF ENGINEER IN-CHARGE.

LABOUR CHARGE FOR THE SPOT READING

OF DTR METER WITH DETAIL SURVEY OF

DEFECT IF ANY. A DULY SIGN COPY BY

SURVEYOR PERSON OF AGENCY IN PRO-

FORMA REPORT SHOULD BE SUBMITTED

TO SDN OFFICE. (DULY FILL PER-FORMA IN

FAULT CONDITION IN WHICH READING

PARAMETER IS NOT SHOWN IN METER)

INSTALLATION OF DTR METER INCLUDING

METER BOX, PROVIDING & FIXING OF 1.5SQ

MM SINGLE STRAND 10 CORE ARMOURED

62 9926000062 COPPER CABLE (3.5METER), TERMINATION No.

IN METER & COIL ETC.(METER, METER BOX,

C.T./P.T. COIL WILL BE PROVIDED BY

INSTALLATION OF DTR METER INCLUDING

METER BOX, TERMINATION IN METER &

63 9926000063 COIL ETC. (WITHOUT 10CORE COPPER No.

CABLE) (METER, METER BOX, C.T./P.T. COIL

WILL BE PROVIDED BY DGVCL)

Binding of messanger Conductorat with a

distance not more than 0.75 mtr with 6 turns

minimum on XLPE Cable with single strand

binding wire (including cost of binding wire)

Supply and Installation of 11/22 kV Distribution

Transformers HT Terminal protector (UV

65 9926000086 Resistance) with using 95/120/150 sq.mm long PER SET

barrel aluminum lug. (1Set = 3 Nos i.e. on R, Y,

Supply & Installation of HT EPR Tap on 11/22 kV

Distribution Transformer with replacement of

bare conductor by HT ABC conductor (DO

66 9926000087 bottom side to transformer) after removal of semi PER SET

conductor by HT ABC (6 inch both side). HT

ABC to be supplied by DGVCL. (1Set = 3 Nos

Supply, Installation, Testing and Commissioning

of Maintenance Free, Ready Capsule, Pipe-In-

Cage (Pic) Type, Earth Electrodes for HT Feeder

Pole Having 2000 mm Electrode Length as per

the Tender Specifications and Drawing. (All

Materials Will Be Supplied By Agency)

Supply, Installation, Testing and Commissioning

of Maintenance Free, Ready Capsule, Pipe-In-

Cage (Pic) Type, Earth Electrodes for HT Feeder

Pole Having 3000 mm Electrode Length as per

the Tender Specifications And Drawing. (All

Materials Will Be Supplied By Agency)

Supply and Installation of 25 X 3 mm GI Strip

having hot dip- galvanized-zinc coating of 80-100

microns without any joints or welding. Both the

end of the GI strip should be connected with GI

nut bolts and required fabrication work for giving

separate earthing connections to

69 9926000090 (1) Neutral of the transformer Meter

(2) MS structures of the transformer center

(Approximately 25 meter GI strip per transformer

- as per requirement and instruction of

Engineer in- charge) (All Materials will be

supplied by Agency)

Supply and Installation of uPVC standard make

Pipe of 1.25" diameter for covering GI strip with

UV protected Cable Ties of 550 X 7.6 mm size to

70 9926000092 bind with pole face(Approximately 25 meter Meter

uPVC pipe for GI strip covering per transformer

centre -as per requirement and instruction of

Engineer in-charge.

Supply & fixing of upto 33 kV Conducotr sleev for

Busbar to Drop out Fuse and Drop out fuse to

71 9926000093 Transformer H.T. including Busbar (12 mm Meter

sleev) as per technical specification. (All

Materials will be supplied by Agency)

Supply & fixing of upto 33 kV Conducotr sleev for

Busbar to Drop out Fuse and Drop out fuse to

72 9926000094 Transformer H.T. including Busbar(15 mm sleev) Meter

as per technical specification. (All Materials will

be supplied by Agency)

Supply & fixing of Disc type Red Color FRP(Non-

flammable) material with Weather resistant, Non-

conductive bird guard OD=300 MM, ID=33 MM,

Width =1.25 MM, one side cut from ID to OD.

(All Materials will be supplied by Agency)

Providing and fixing of LT Terminal protectors

i.e. Re-useable boot (LT Side 1.1 kV) including

74 9926000096 LT (1.1 kV) insulating taps. All live part at LT No

side shall be covered with fixing of LT insulating

75 Nylon Net around Transformer Center

75.1 9926000097 Nylon Net (12 * 15 ft) Per Net

75.2 9926000098 Nylon Dori Per TC

Labour charge for fitting Nylon Net (All fabricated

75.3 9926000099 material for fitting nylon net shall be provided by Per TC

LABOUR RATES FOR MAINTENANCE WORKS

Item Code Details of works Unit FY 2024-25

(A) LINE MAINTENANCE

1 9924000001 Cutting of Tree branches surounding HT/LT line Per Tree

Replacement of old jumpers & providing new

2 9924000002 double jumpers with 8" binding [D Type] & No.

capsuling with PVC pipe etc

3 9924000005 Support pole for Stay PSC/STP/RSJ No.

4 9924000006 Pin binding of conductor 11/22kv Pin insulator No.

Pin binding of conductor 11/22kv Pin insulator

per pole in costle area with cleaning .

6 9924000008 Pin binding of conductor LT shakel insulator No.

Replacement of one/both disc.insulator at strain

8 9924000010 Replacement of LT shackle insulator at cut point No.

9 9924000011 Refixing of V cross Arm No.

Replacement of V cross Arm (With

Transportation & Painting)

11 9924000013 Refixing of Top fitting in proper position No.

12 9924000014 Replacement of Top fitting No.

13 9924000015 Replacement of LT cross Arm No.

Providing DO fuse on DP with carting &

jumpuring(ONE DO FUSE)

Numburing of pole with paint by preparing back

15 9924000017 ground of one colour and have lettering(height 3" No.

* width 0.5") using stensil

16 9924000018 Fixing of MMB(1PH.) at consumer end No.

17 9924000019 Fixing of MMB(3PH.) at consumer end No.

18 9924000020 Replacement of (1ph.) meter for Urban area No.

19 9924000021 Replacement of (1ph.) meter for Rural area No.

painting consumer no. on MMB (Urban) (with

letter size height 40mm* width 8mm)

painting consumer no. on MMB (Rural) (with

letter size height 40mm* width 8mm)

Replacement of deteriorated Single phase

Fixing of new dist. Box with complete wiring

including clamps,nut bolts etc.

Reparing of guarding involving reshaping of

bearer wire cross lacing binding etc.

Painting of steel fabricated material of RSJ DO

DP structure with paint

Painting of steel fabricated material of RSJ pole

26 9924000028 mounted transformer double pole structure with No.

Painting of steel fabricated material of RSJ

single pole with paint

painting of steel fabricated material of PSC

Single pole (HT line) with paint

painting of steel fabricated material of PSC DO

DP double pole with paint

painting of steel fabricated material of PSC

30 9924000032 double pole at pole mounted transformer with No.

31 9924000033 Providing line seperater single phase No.

32 9924000034 Providing line seperater three phase No.

Replacement / Providing of stay insulator along

with adjustment of tension in stay wire

Replacement of deteriorated /providing LT dist.

34 9924000036 Box with new up to 100KVA capacity & crediting No.

Replacement of deteriorated /providing LT dist.

35 9924000037 Box with new above 100KVA capacity & No.

crediting it to store.

36 9924000038 Adjustment of tension in stay wire No.

37 9924000039 Refitting of LA No.

Converting pin point to Shackle point including

38 9924000040 location

dismentaling & restringing etc.

replacement of 11KV Pin insulator with providing

new double pin binding

replacement of 22KV Pin insulator by new 11kv

40 9924000042 pin insulator with spares & providing new double No.

Providing 11kv double disc insulators with

binding & restringing

Replacement of existing 11kv conductor (all size)

with new double pin binding

Plumbing of PSC Pole with straightening at pin

Plumbing of PSC Pole with straightening at

Plumbing of tilted DP structure (PSC/RSJ/STP)

with refilling of stone Murrum etc.

Providing new 11kv AB /GO switch with

46 9924000049 fabrication and insulated colour code jumper, Set

binding, lugs etc

Replacement of old 11kv AB /GO switch with

providing new insulated jumper, binding, lugs etc

Providing cage type loop guard in verticle LT line

48 9924000052 per pole

with using PVC reel insulators etc

Labour charges for replacement /providing of

49 9924000053 MMB & service with all accessories for three No.

phase connection

Labour charges for replacement /providing of

50 9924000054 MMB & service with all accessories for single No.

phase connection

Dismentalling of existing Dist.X'mer center(RSJ

51 9924000055 /STP POLE) 25/63/100/200 KVA with all No.

fabrication & creditig the old material to store

Disconnection from LT pole 1 phase

Reconnection from LT pole 1 phase

( payment after receipt of R/C charges)

54 9924000058 Disconnection from LT pole 3 phase No.

Reconnection from LT pole 3 phase

( payment after receipt of R/C charges)

Dismentaling & removing of service line from

pole & crediting to S/dn (1 ph.)

Dismentaling & removing of service line from

pole & crediting to S/dn (3 ph.)

Reconnection of service line complete with PVC

Reconnection of service line complete with PVC

Providing spiral type earthing by G.I. NO

8(weight 2kg -5mtr in length) with salt and coal

10kg each, including pvc rigid pipe 20mm dia(

1.5mtr length) to pass exposed part of G.I. wire

at consumer end with all materials, earth

resistance should be less than 2 ohms

Providing and fixing of signle core 1.5 sq mm

single strand copper insulated cable with cable

nail clip for spiral type earthing at consumer end.

The end of G.I. no 8 is to be connected by

connector with copper cable of which other end

61 9924000070 per meter

shall be connected to the earth terminal of meter

box. This item shall be used in location where

there is more distance between earth terminal

and earthing terminal of meter. (All materials

supplied by contractor)

Providing and fixing of FRP fencing of 1500mm height at

Distribution Transformer Centers with necessary

excavation, concreting for grouting vertical posts up to

450 mm in ground, Hardware, accessories, fittings, lock,

etc. complete as shown in specifications and drawing

enclosed. The fencing shall comprise of one gate

mm wide having two flaps and payment for the same

shall be measured on Rmt basis.

Inside fencing area to be levelled properly first by

compaction above road level and then finished

with 6” thick 1:2:4 cement concrete & cement

plaster supported with 6” brick wall on

surrounding.(Materials to be utilized :Cement

Bags, Bricks, Sand & Aggregates)

Schedule-B for Work of ARC for Erection & Maintenance of HT/LT Line and TC work and other maintenance work O/H & UG XLPE

Cable & Laying of underground cable network with terminations in the area of DGVCL under all scheme for all Sub division

under Rander Division.

Item Code Description Unit FY 2024-25

Labour charge for excavation of cable trench of 400mm width x 1200mm depth,

in any type of soil for laying of cable of size up to 240 mm2 (For additional cable

200 mm additional width shall be considered i.e. half trench length is to be

Labour charge for excavation of cable trench of 600mm width x 1200mm depth,

in any type of soil for laying of cable of size up to 240 mm2 (For additional cable

200 mm additional width shall be considered i.e. half trench length is to be

Labour charge for excavation of cable trench of 400mm width x 1500mm depth,

in any type of soil for laying of cable of size up to 240 mm2 (For additional cable

200 mm additional width shall be considered i.e. half trench length is to be

Labour charge for laying of 11kV / 22 kV XLPE Cable of size up to 240 mm2 &

preparation of sand layer 100mm thick, in the cable trench & covering the cable

with 150 mm dia (Inner), thickness 25 mm, 1.0 meter long RCC half round

muffs and providing and fixing of 4inch width yellow colour polyethylene tape with

printing "CAUTION ELECTRIC CABLE BELOW" at 0.75 m depth from ground

surface after laying cable in trench. This will provide indication that electric cable

is passing underground so as to protect cable from mechnical injuries, refilling the

same, as per Instruction of Engineer in Charge (EIC).

Labour charge for horizontal drilling using Auger machine without damage to

surface road at max 2.0 mtrs depth & putting of 6.11 kg/cm2 , class-4,Green

color, 110mm O.D. , 8.5mm thickness H.D.P.E. pipe confirms to IS 4984-

1987(3rd revision) and BIS certification and laying of 11KV/22KV XLPE cable of

5 9925000005 size up to 240 mm2 in HDPE pipe, as per Site Condition (excluding cost of pipe). Meter

The detail map obtained from HDD machine and excell sheet(hard and soft copy)

indicating the respective depth and distance from adjacent landmark for each

segment for HDD is must required to be submitted. HDD to be carried out at

depth 1.5 mtrs to 2.0 mtrs as per site conditions and as per instruction of EIC.

Labour charge for horizontal drilling manually without damage to surface road

at max 2.0 mtrs depth & putting of 6.11 kg/cm2 , class-4,Green color, 110mm

O.D. , 8.5mm thickness H.D.P.E. pipe confirms to IS 4984-1987(3rd revision) and

BIS certification and laying of 11KV/22KV XLPE cable of size up to 240 mm2

6 9925000006 size, as per Site Condition (excluding cost of pipe). The detail map and excell Meter

sheet(hard and soft copy) indicating the respective depth and distance from

adjacent landmark for each segment of cable to be submitted. Drilling to be

carried out at depth Minimum 1.2 mtrs to 2.0 mtrs as per site conditions as per

instruction of EIC.

Supply of 6.11kg/cm2 , class-4,Green color, 110mm O.D. , 8.5 mm thickness

7 9925000007 H.D.P.E. pipe confirms to IS 4984 and BIS certification for laying of underground Meter

11KV / 22KV XLPE cable up to 240 mm2 size.

Labour work for RCC concreting on disputed location and repairing of damage

8 9925000008 portion of road crossing for the work carried out for roads crossing as well as CMT

concreting & muffing of ploes including all materials (1:2:4)

Item Code Description Unit FY 2024-25

Providing & fixing concrete stone route marker of 300 mm width x 150 mm thick

x 650 mm height embedded in earth at least 300 mm below & 350 mm above

ground level respectively at distance approx 50 meters along the length of cable.

The RCC concreting (1:2:4)(all necessary maeterials will be in bidder's scope) of

route marker is to be carried out 300 mm width x 150 mm thick x 300 mm below

9 9925000009 ground level as per instruction of EIC. The route marker should be with name No.

of company with approved yellow colour-DGVCL. The distance from marker to

cable and cable depth with feeder name etc., marked with arrow sign is to be

painted on it.The route marker is to be fixed at location near to any fixed

permanent location (not necessary to fix exact on top of cable) as per instruction

Erection of D.P. (double pole) structure using 9 / 11 Mtr. RSJ pole with cable

connection arrangement along with fitting of necessary fabrication for 11KV cable

including excavation of pit & refilling of earth as per instruction of EIC. (Exclusive

of concreting & muffing of poles)

Erection of Single pole structure using 9 / 11 Mtr RSJ pole with cable

connection arrangement along with fitting ofnecessary fabrication for 11KV/22 KV

cable including excavation of pit & refilling of earth as per instruction of EIC.

(Exclusive of concreting & muffing of poles)

Erection of D.P. (double pole) structure using 8.0 Mtr. PSC pole with cable

connection arrangement along with fitting of necessary fabrication for 11KV cable

including excavation of pit & refilling of earth as per instruction of EIC. (Exclusive

of concreting & muffing of poles)

Erection of Single pole structure using 8.0 Mtr PSC pole with cable connection

arrangement along with fitting ofnecessary fabrication for 11KV/22 KV cable

including excavation of pit & refilling of earth as per instruction of EIC. (Exclusive

of concreting & muffing of poles)

Labour charge for erecting of 11kV / 22 kV XLPE cable of size up to 240 mm2

14 9925000014 on DP Structure with fixing of 02 Nos polymer cleats on top and middle Per Job

part.Polymer cleats, nut bolts etc. fixing material to be provided by contractor.

Providing & fixing of 6.11kg/cm2 , class-4,Green color, 110mm O.D. , 8.5mm

thickness H.D.P.E. pipe confirms to IS 4984 and BIS certification on the

erected DP structure for the mechanical protection of cable by inserting the

15 9925000015 cable inside HDPE pipe. The HDPE pipe shall be erected in such a way that Per Job

300mm shall be below the ground level and the rest 2700 mm shall be

supported on the DP Structure with 01 No Polymer cleat.All materials including

polymer cleat and Nut bolt to be provided by contractor.

Providing and fixing of pipe type earthing from 80 mm dia class-B GI pipe with

pit to be filled with salt & coke and construction of chamber as per DGVCL Drg.

16 9925000016 No. dg /100 for DP and cable. The earthing pit should be joined with cable by G.I. No.

strip of size 1” width & 2 mm thick. All material GI pipe, Coke, Salt etc will be

supplied by bidder.

Supply & fixing of heat shrink type end terminations (outdoor) for upto

11kV 3C x 185 mm size XLPE cable as per DGVCL technical specification

Supply & fixing of heat & shrinkable end terminations (outdoor) for upto 22 kV

3C x 185 mm2 size XLPE cable as per DGVCL technical specification)

Supply & fixing of heat shrink type end terminations (indoor) for upto 11kV 3C

x 185 mm2 size XLPE cable as per DGVCL technical specification)

Supply & fixing of heat & shrinkable end terminations (indoor) for upto 22 kV

3C x 185 mm2 size XLPE cable as per DGVCL technical specification

Supply & fixing of heat shrinkable straight through joint for upto 11kV 3C x

185 mm2 size XLPE cableas per DGVCL technical specification.

Supply & fixing of heat shrinkable straight through joint type for upto 22kV 3C

x 185 mm2 size XLPE cable as per DGVCL technical specification

Labour charge for excavation of 2100mm long x 1200mm wide x 1200 mm deep

joint pits for installation of 11kV / 22kV Straight through joints as per

23 9925000023 instruction of engineer-in-charge & covering the cable with 150 mm dia (Outer), No.

thickness 25 mm, 1.0 meter long RCC half round muffs & refilling same as per

instruction of EIC .

Item Code Description Unit FY 2024-25

Providing and fixing of insulating bus bar, made from 11KV/22KV XLPE cable

after removal of semi conducting layer and applying of PVC heat shrinkable anti-

tracking core insulating tubing (1.1KV), on both end terminal using Aluminium

long barrel heavy duty up to 240 sq mm lugs, Aluminium bus connector. Taping

with PG- clamp for bus conductor as per drawing and as per instruction of EIC.

The Alluminium lugs and PG clamp shall be covered with 11KV/22KV HT

insulating tapes.(11KV/22KV XLPE cable will be in scope of DGVCL while all

other materials will be in bidder's scope)

Testing of cable at various points and commissioning the feeder as per

25 9925000025 instruction of engineer-in-charge.Test result shall be submitted by contractor with No.

Preparation and submission of 6 (six) copies, of complete layout drawings with

26 9925000026 GIS mapping as per actual cable routing showing road crossing, HDPE pipe Set

sleeving, jointing locations, markers etc.

Providing and fixing of Sign Board at junction point Made out of 2 mm aluminium

sheet size 750x300 mm (2.5 x 1ft) rectangle, as per design, pre treated with

phosphate process and acid etching coated with one coat of epoxy primer and

two coats of best quality paints, refloctrorised with Hi-Intensity retro – reflective

sheeting as per the latest and frame fabricated from suitable size iron angle. The

Sign Board is to be fixed on the base prepared from channel and bracing angles

which is grouted by means of cement concreting of 1:2:4 for size of 300 mm dia x

800 mm height (500 mm to be grouted in ground). The details to be displayed on

sign board will be given by In-charge Engineer.

(a) Hi intensity Micro prismatic Grade

Providing and fixing of Sign Board (Danger Board) on Distribution Transformer

Made out of 2mm aluminium sheet size 300x300mm (1x1ft) as per design, pre

treated with phosphate process and acid etching coated with one coat of epoxy

28 9925000028 primer and two coats of best quality paints, refloctrorised with Hi-Intensity retro- No.

reflective sheeting as per the latest and frame fabricated from suitable size iron

angle. The Sign Board (Danger Board is to be fixed at the location as per

instruction of In-charge Engineer.

(a) Hi intensity Micro prismatic Grade

Providing & fixing of aluminium tag of size 250 mm (L) x 75 mm (W) from 3 mm

aluminium sheet along with 1.0 mm dia aluminium binding wire for fixing of

29 9925000029 aluminium tag near end termination joint at DP structure for identifyng the cable. No.

The details of feeder i.e. 11 / 22 KV with feeder name shound be punched on the

tag by letter punch of size 16 mm as per instruction of In-charge Engineer.

Supply & fixing of heat shrink type end terminations (outdoor) for 11kV 3C x

240 mm2 size XLPE cable as per DGVCL technical specification

Supply & fixing of heat & shrinkable end terminations (outdoor) for 22 kV 3C x

240 mm2 size XLPE cable as per DGVCL technical specification)

Supply & fixing of heat shrink type end terminations (indoor) for 11kV 3C x

240 mm2 size XLPE cable as per DGVCL technical specification)

Supply & fixing of heat & shrinkable end terminations (indoor) for 22 kV 3C x

240 mm2 size XLPE cable as per DGVCL technical specification

Supply & fixing of heat shrinkable straight through joint for 11kV 3C x

mm2 size XLPE cableas per DGVCL technical specification.

Supply & fixing of heat shrinkable straight through joint type for 22kV 3C x

mm2 size XLPE cable as per DGVCL technical specification

Installation, Testing and commissioning of 11 KV,630 A SCADA Compatible,

36 9925000038 RRL type- 3 Way RMU including Two numbers of earthings as per Drawing No.

(material is in bidder's scope) and as per DGVCL Technical specification.

Installation, Testing and commissioning of 11 KV,630 A SCADA Compatible,

37 9925000039 RRLL type- 4 Way RMU including Two numbers of earthings as per Drawing No.

(material is in bidder's scope) and as per DGVCL Technical specification.

Installation, Testing and commissioning of 22KV,630 A SCADA Compatible, RRL

38 9925000040 type-3 Way, RMU including Two numbers of earthings as per Drawing (material No.

is in bidder's scope) and as per DGVCL Technical specification.

Item Code Description Unit FY 2024-25

Installation, Testing and commissioning of 22KV,630 A SCADA Compatible,

39 9925000041 RRLL type-4 Way, RMU including Two numbers of earthings as per Drawing No.

(material is in bidder's scope) and as per DGVCL Technical specification.

Construction of plinth for 11KV, RRL type- 3 Way (i.e Two numbers of Isolator

& One number of Breaker) Ring Main Unit as per DGVCL's technical

specification mentioned in drawing no: Drg. 11kv-01. All required material will be

supplied by contractor.

Construction of plinth for 11KV, RRLL type- 4 Way (i.e Two numbers of

Isolator & Two number of Breaker)Ring Main Unit as per DGVCL's technical

specification mentioned in drawing no:Drg. 11kv-02.All required material will be

supplied by contractor.

Construction of plinth for 22KV, RRL type- 3 Way (i.e Two numbers of Isolator

& One number of Breaker) Ring Main Unit as per DGVCL's technical

specification mentioned in drawing no: Drg. 22kv-01. All required material will be

supplied by contractor.

Construction of plinth for 22KV, RRLL type- 4 Way (i.e Two numbers of

Isolator & Two number of Breaker)Ring Main Unit as per DGVCL's technical

specification mentioned in drawing no:Drg. 22kv-02.All required material will be

supplied by contractor.

Modifications e.g.Providing and fixing of Terminal protectors i.e. Re-use able boot

(HT Side 11/22KV, LT Side 1.1KV) including 11/22 KV insulating taps and

L.T.(1.1 KV) insulating taps ,Busbar, Tapping from Bus Bar (11/22 KV XLPE

cable) through P.G. Clamp for H.T. Jumper to D.O. Fuse to bushings of

Transformer Center, providing & Fixing of jumper and providing & fixing of Heat

Shrinkable Anti Tracking Core Insulating Tubing (Insulation Level 11/22 KV) in

H.T. jumper , Clamping arrangement of cable support frame on both side of

44 9925000046 existing Over Head type Distribution Transformer to utilize in Under Ground No.

cable network as per drawing & as per instruction of Engineer incharge. All live

parts i.e. PG-Clamp, connections of D.O.fuses, HT bushings etc . shall be

covered with fixinng of 11/22 KV HT insulating tapes. ( 11/22 KV XLPE cable will

be in scope of DGVCL while all other materials will be in bidder's scope ) .

Laying of any size of 11/ 22 KV XLPE /PILC Cable in redaymade trench or in

46 9925000060 Labour charges for Lying of O/H XLPE cable pole to pole KM

Supply of 150 mm dia (Inner), thickness 25 mm, 1.0 meter long RCC half round

In Words :- One Crore Rupees Only

% Above / Below of Estimate Amount

Stamp & Sign of Contractor

Executive Engineer (O&M)

DGVCL,Rander Division