Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹39.5 LAccepted-AOC H NO 02 BALLUPUR ROAD DEHRADUN UK PIN 248001 | DEHRADUN | DEHRADUN | UTTARAKHAND | 248001 | L1 | Accepted-AOC Being 1st lowest | |
| 2 | L2₹44.7 L+₹3.0 L (7.25%)Rejected-Finance 26 NEW AVAS VIKAS COLONY DELHI ROAD SAHARANPUR UP | L2 | Rejected-Finance Being 2nd Lowest | |
| 3 | L3₹44.9 L+₹3.2 L (7.62%)Rejected-Finance 61 2 JAURASI LANDHAURA HARIDWAR 247664 UK | HARIDWAR | UTTARAKHAND | 247664 | L3 | Rejected-Finance Being 3rd Lowest | |
| 4 | L4₹45.0 L+₹3.3 L (7.89%)Rejected-Finance 54 AKASHDEEP COLONY CHAKRATA ROAD DEHRADUN | DEHRADUN | DEHRADUN | UTTARAKHAND | L4 | Rejected-Finance Being 4th Lowest | |
| 5 | L5₹45.6 L+₹3.9 L (9.36%)Rejected-Finance | L5 | Rejected-Finance Being 5th Lowest |
Tender Value
₹49.9 L
EMD Value
₹99,800
Closing Date
5 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Clement Town
GE Clement Town MES Dehradun
CERTAIN REPAIRS TO BUILDINGS AT 2 PARA (SF) UNDER GE CLEMENT TOWN.
2023_MES_602074_1
GE/CLT/ OF 2023-24
Open Tender
Civil Works
Item Rate
180 days
GE Clement Town
Class D Cat a (i)
6 documents required · 6 mandatory
₹500
Yes
GE Clement Town
₹99,800
Yes
10 Aug 2023
8 Jun 2023
7 Jul 2023
9 Jun 2023
5 Jul 2023
21 Jun 2023
Amount
Dismantling asbestos cement (corrugated, semicorrugated etc) sheets in roof coverings complete all as specified and directed.
S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa (AZ 150) as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.
S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPa as in ridge and similar work etc fixed with self tapping screws as specified.
S&F 6 mm thick cement, corrugated or semicorrugated sheets as in roof covering, walls etc fixed to steel/timber purlines rafters etc fixed with coach screws complete all as specified and directed.
Demolition of cement cocrete any description and in any position not otherwise specifically provided for complete all as specified and directed.
Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.
Dismantling timber as as in fillets rails posts rafter etc under 40 Sqcm in section in any position unframed work complete all as specified and directed.
M&L Plain fillets 2nd class hardwood square, rectangular or triangular in section, clean sawn, secured with nails or brads Exc 13 & n exc 25 sq cm complete all as specified and directed.
M&L for GI snap grid framework including 4mm thick E-boards for false ceiling (grid size 605mm x 605mm ) including necessary notching and preparing holes and hangers 2mm dia GI adjusting level fixed to structural members. Galvanised steel section of exposes T section grid with exposed flange faces duly powder coated white/ivory colour. The suspension system consisting of perimeter wall angle of size 20x20x0.45mm of GS sheet to secured on wall/partition face with the help of rawl plug screws @450mm c/c. Universal T shaped main runner with single rotatary stiching of size 35x24mm made from 0.33mm thick GS sheet of length 3.60m to be spaced @1200mm c/c. Cross T shaped runner of size 25x24mm with double thick GS sheet 0.25mm thick spaced @ 600mm c/c. To form 600x600mm size module, intermediate T shaped cross runner of size 25x24mm made from 0.25mm thick GS sheet of length 600mm is placed inside the module of size 1200x600mm including suspension of the ceiling frame from structural members with 2mm thick GI wire and level adjusters all cut out etc to the required line and shape as per manufacturer recommendations complete all as specified and directed.
Demolition of brick work or stone masonry built in cement mortar including all quoins, arches, jambs etc complete all as specified and directed.
M&L for brick work with sub class 'B' old size bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L for Non Skid ceramic coloured tiles 7mm to 8mm thick, (square or rectangular) area of each tile exc 0.18 Sqm but n. exc 0.38 sqm in floors etc , over & including 15 mm thick cement mortar (1:6) screed etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified.
M&L for Non Skid ceramic coloured tiles 7mm to 8mm thick, (square or rectangular) area of each tile exc 0.18 Sqm but n. exc 0.38 sqm as in riser of steps, skirting, dado and pillar etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles with and including over 10mm thick rendering in CM (1:4) complete all as specified and directed.
M&L 30 mm thick PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in sub base of floors finishing even and fair complete all as specified and directed.
M&L for Machine cut Kota stone slab flooring 18-20 mm thick, laid over & including screed bed of 20 mm thick in cement mortar (1:4) and jointed with grey cement slurry mixed with matching shade pigment including rubbing and polishing etc complete all as specified and directed.
M&L for Kota stone slab 18-20 mm thick on vertical surfaces like riser of steps, skirting, dado and pillar laid over & including 10 mm thick in cement mortar (1:4) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc complete all as specified and directed.
M&L for rubbing and polishing of existing kota stone flooring to match the surface , complete all as specified and directed.
Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.
M&L for 15mm thick plaster in CM 1:6 on fair face of brick walls finished even and smooth without using extra cement complete all as specified and directed.
M&L for 15mm thick plaster in CM 1:4 on other than fair face of brick walls finished even and smooth without using extra cement complete all as specified and directed.
M&L for 75mm thick PCC 1:3:6 type C2 (Using 40mm graded stone aggregate) as in plinth protection/path laid in panels, finish the top surfaces even and smooth without using extra cement complete including filling the joints with mastic compound complete all as specified and directed.
M&L for preparation of newly plastered surface of wall and applying two coats of oil bound distemper including a coat of primer of approved tint over a coat of wall care putty to make the surface smooth complete all as specified and directed.
M&L for preparation of old decorated surface of internal wall by removing existing treatment with mechanical sander (rpm 1500-2700) along with internal dust extraction system for clean environment certified by reputed paint manufacturers and applying two coats of acrylic distemper over a layer of wall care putty to make the surface smooth using roller all as specified and prescribed by manufacturer of paint and all as directed at site.
M&L for preparation of newly plastered surface of external wall all as prescribed by manufacture of paint and applying two coats of exterior anti fungal acrylic emulsion paint (walmista of Berger paint or equivalent in Asian paint, Nerolac etc having three years of performance warranty) over a coat of exterior water based primer of same make all as specified and prescribed by manufacture of paint and as directed at site.
M&L for preparation of old decorated surface of exterior wall by removing existing treatment with mechanical sander (rpm 1500-2700) along with dust extraction system for clean environment certified by reputed paint manufacturers, then washing the surface with Bleaching powder solution for treatment of fungal growth and applying two coats of exterior anti fungal acrylic emulsion paint (wallmista of Berger paint or equivalent in Asian paint, Nerolac etc having three years of performance warranty) over a coat of exterior water based primer of same make all as specified and prescribed by manufacture of paint and as directed at site.
Taking down chowkhats or frames with shutters (without taking off shutter from the frame) of size n.exc 1.50 Sqm complete all as specified and directed.
Taking down chowkhats or frames with shutters (without taking off shutter from the frame) of size exc 1.5 Sqm and n.exc 4 Sqm complete all as specified and directed.
Taking down shutter of any description exc 1 Sqm but n. exc 2 sqm each complete all as specified and directed.
S&F window/ventilator prepainted section of frame 72x55mm fixed to wall or concrete surface with rawl plugs made of galvanised steel powder coated and section of shutter 47x20mm, mulion section 72x50mm (Base steel as per IS 513 "D" quality galvanized as per IS 277 with zinc of 120 gms/Sqm) glazed and wire gauge shutter prepared to receive wiremesh to the shutter (Double door shutter) with total coated thickness of 0.6mm including grills/guard bars made made of 10mm square bars powder coated fixed to window frame with screws at 110mm c/c horizontal ways, 4 mm thick sheet glass, 0.36mm stainless steel wire cloth i.e. 1.4mm aperture and necessary fittings and all builders hardware such as handles, tower bolts & stays etc complete all as specified and as directed.
S&F 30mm thick flush shutter solid core construction with block board core and ply wood face panels, commercial type both sides complete all as specified.
S&F second class timber framed wrought and framed hard-wood clean sawn in scantlings complete all as specified and directed.
S&F 30mm thick 2nd class hard wood glazed and skelton shutter, open rebated and prepaned to receive glass, gauge etc divided in to square with plain and mitred beads and rebated sash bars any numbers edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters complete all as specified and directed.
S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specifed and directed.
S&F 250mm stainless steel sliding door bolts, plate type, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate.
S&F 100mm size stainless steel butt hinges medium weight ISI marked, cold rolled complete all as specified and directed.
S&F 200mm long stainless steel barrel tower bolts complete all as specified and directed.
S&F 150mm size stainless steel handles complete all as specified and directed.
M&L for applying two coats of synthetic enamel paint to new undecorated wooden surfaces over a coat of pink primer including preparation, over 10cm width or girth complete all as specified and directed.
M&L for preperation of old wooden surfaces of any description over 10 cm in width or girth and applying two coat of synthetic enamel paint etc complete all as specified and directed.
Taking up or down 15mm dia steel tubing and connections including cleaning for re-fixing or removal from site complete all as specified and directed.
S&F 15 mm bore dia of medium grade galvanised steel tubing with all fittings including tank nipple and fixed complete to wall or laid in floor including cutting through walls, floors, etc and their making good with existing surface complete in complete all as specified and directed.
S&F 15mm bore brass gate wall valve with iron wheel, screwed both ends for iron pipes complete all as specified and directed.
Taking up or down 20mm dia steel tubing and connections including cleaning for re-fixing or removal from site complete all as specified and directed.
S&F 20 mm bore dia of medium grade galvanised steel tubing with all fittings including tank nipple and fixed complete to wall or laid in floor including cutting through walls, floors, etc and their making good with existing surface complete all as specified and directed.
S&F in repair double layer (ISI marked) rotational moulded PVC water storage tank cylinderical, vertical with closed top hoisted and fixed in position tank capacity 500 Ltr with and including PTMT float valve 20mm dia and making connection for inlet and outlet complete all as specified and directed.
S&F 20mm bore brass gate wall valve with iron wheel, screwed both ends for iron pipes complete all as specified and directed.
S &F vitreous china Wash down water closet (Padestal pattern) white with P or S trap including plastic water closet seat & cover mild steel chromium plated or aluminised hinging device and jet, fushing cistern low or high level, 32mm dia polyethylene fush pipe etc complete all as specified and directed. (excluding cost of flush tank).
S&F in repair vitreous china water closet Orissa pattern of size 580 X440mm white ISI marked including provn of cement concrete bedding including connections to flushing cistern/pipe and making good disturbed portion to match existing surfaces complete all as specified and directed.
S&F Vitreous China Urinal, Half stall type,white complete including providing and fixing plugs, bedding urinal agianst wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe).
S&F in repair PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action push type with inlet ball valve and float including flush pipe long 32mm dia, ball valve, handle, bracket etc complete all as specified and directed.
Supply & Fix in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.
M&L for reinforced precast cement concrete (factory made) 1:2:4 type B1 (using 20mm graded stone aggregate) as in landings, cover slabs (for manholes /drain covers etc), shelves and similar articles (shape and size as directed) with plain faces including necessary form work, set in CM 1:4 complete all as specified and directed.
Dismantling wrought Iron or mild steel work of any description not otherwise provided for wind tie complete all as specified and directed.
S&F MS work as in doors or gates, water staging, windows, ventilators of angle/rectangular or square hollow section or other section with gusset plates, rails, braces etc complete, drilled for fixing of steel sheeting or other covering doors, windows, ventilators etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door, window, ventilator fittings and hanging, also fastening and fixing conforming to Fe 410-W (Gde-E-250) quality 'A' complete all as specified and as directed.
M&L for preparing new steel and iron surfaces of any description over 10 cm width /girth and applying two coats of synthetic enamel paint of any tint over one coat of red oxide primer complete all as directed.
M&L for mild steel TMT bars 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
NOTES :- 1. For the items for which specifications not mentioned any where in the tender, the BIS specifications shall be followed.
Nanda Brothers
IRFANAHMAD CONTRACTOR
M/S SURAT SINGH AND SONS
PANWAR CONSTRUCTIONS
TRINITY CONSTRUCTION
SWASTIKA BUILDERS
RADHA ENTERPRISES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .