CERTAIN MISC REPAIRS TO BOUNDARY WALLS, GATES, FENCING, FOOTPATHS, RCC JALLI ETC AT C 2 SECTOR OF AGE BR I UNDER GE (SOUTH) AMBALA CANTT

Amount

Material and labour for brick work with sub class ‘B’ bricks, straight or curved on plain exceeding 6 metre mean radius in cement mortar (1:6) including demolition of brick work built in cement mortar including demolition of old brick/stone masonry built in cement mortar of any description including all quoins, archs, pillars etc complete all as specified and directed.

Material and labour for brick work (except bricks) straight or curved on plan exceeding 6 metre mean radius built in CM 1:6 (old size brick) including demolition of old brick /stone masonry built in cement mortar of any description including all quoins, archs, pillars etc complete all as specified and directed.

Material and labour for brick work with sub-class `B' bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 as in drains including nescessary filling & jointing with cement mortar on other side of drain including demolition of old brick masonry built in cement mortar of any description complete all as specified and directed.

Material and labour for brick work (except bricks), straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 as in drains including nescessary filling & jointing with cement mortar on other side of drain including demolition of old brick masonry built in cement mortar of any description complete all as specified and directed.

Taking down cement plaster of any description and in any position including raking out joints, hacking for keys, scrubbing down with water etc. of any thickness including dado any description, complete all as specified and as directed.

Material and labour for 15mm thick rendering on fair faces of brick work or concrete surface in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed

Material and labour for 15mm thick rendering on fair faces of brick work or concrete surface in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed

Material and labour for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper with hand roller, over a coat of alkaline resistant primer over a coat of wall care putty not less than 1mm thick as per manufacturer's instruction complete all as specified and directed.

Material and labour for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of alkali resistant primer on walls complete all as specified and directed.

Material and labour for premium quality glazed ceramic coloured tiles of size 350x250mm/ 450x350mm x 7mm thick gloosy/mat finish as in vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry @ 3.00 kg/square metre and pointed in coloured cement to match with and including 10 mm thick rendering in cement mortar 1:4 finished rough surface to receive tiles including dismantling of existing wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

Roughening surfaces of old concrete floor/plastered surfaces by picking, sweeping clean and washing down with water to remove dust by brushing with neat cement slurry at 03 Kg of cement per Sqm etc. with and icluding 40mm thick PCC type B1 1:2:4 (20mm graded mechanically crushed stone aggregate) as in flooring/ hard standing finishing the surface even and smooth without using extra cement complete all as specified and directed.

Material and labour for providing & fixing precast cement concrete louvers and jallies or louvers, 40mm thick (measured solid) 1:2:4 Type B-0 (using 12.5 mm thick graded mechanically crushed stone aggregate), set in cement mortar 1:4 including all mouldings including dismantling existing jallies etc complete all as specified and directed.

Material and labour for 75mm thick PCC (1:4:8) type D-2 (using 40 mm graded curshed stone aggregate) as in floor / sub-base / hard standing etc finished even and fair including demolition of existing old cement concrete in ground floors and pavings not exceeding 15cm thickness (below or above) ground level etc complete all as specified and directed.

Material and labour for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed.

Material and labour for providing and laying of precast cement concrete solid concrete block, type B-1, 1:2:4 (using 20mm graded stone aggreagate) confirming to IS 2185 (Part-I) 2005 of 30 cm high, 10 cm thick and of suitable width including chamfers, weatherings, throating etc as in kerb continuous edging jointed in cement mortar 1:4 and struck flush pointing as the work proceeds and finishing with neat cement flush joint, including demolition of existing cement concrete/conctrete blocks/kerb stones etc of any description in ground floors etc complete all as specified and directed.

Material and labour for 50mm thick PCC (1:3:6) type C-1 using 20mm graded mechanically crushed stone aggregate as in plinth protection finished even and smooth without using extra cement with & including 10mm wide, 30mm deep joints at the rate of 3.00 mtr centre to centre and at every turning & filling the joints with bitumen & sand mixture including demolition of cement concrete in ground floor and pavings not exceeding 15 cm below or above ground level etc complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, embedded in natural ground including taking out embedded portion and making good disturbed ground complete all as specified and directed.

Taking down/dismantling old chain link fencing/wire mesh etc of any type and description complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type(of size 4mm dia and mess size 100x100mm) to any type of standards, rails, straining bolts etc, including provison of binding wire complete all as specified and directed.

Supply only chain link fencing MS galvaised fencing mesh size 100mm x 100mm and 4mm dia of wire etc, etc complete as all specified and directed.

Material and labour for PCC 1:3:6 type C-2 using 40 mm graded mechanically crushed stone aggregates as in foundation, sub base and mass concrete complete all as specified and directed.

Material and labour for mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking , bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips confirming Fe-410-W (Gde.E-250) quality-A or Fe 290 (Gde - E-165) complete all specified and directed

Supply and fixing of mild steel, rolled sections (channel, angle or tee sections) fixed independently cut to ordinary length as in post or struts in fencing, ladder etc. including cutting tops to shape as required , drilling holes, notching for wire etc. including flat iron fillets with nuts and bolts for securing chain link fencing including all necessary drilling, bolting or riveting etc conforming to Fe-410(Gde 250), complete all as specified and directed.

Supply and fixing of mild steel screw bolts (machine made) dia of neck 11 to 15mm with hexagonal or square head at one end and screwed the other head or screwed both end, each screw end to fitted with 3mm thick MS washers and one hexagonal or square nuts, length of bolt exceeding 5cm but not exceeding 10 cm long complete all specified and directed.

Material and labour for preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Supply and fixing of galvanized 2 strand, steel barbed wire, 2.24 mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossing with & provision of galvanized mild steel wire, staples or steel pins etc (each line of wire to be measured), including dismantling of deterioted barbed wire fencing complete all as specified and directed.

Material and labour for 18 to 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, skirting, on vertical surface and like in 10mm thick rendering in CM (1:3) and jointed with grey cement slurry @ 3 Kg/Sqm, and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including rounding, moulding on edges etc and polishing etc including dismantling of existing stone /tiles etc including cement mortar bedding and rubbish off the premises complete all as specified and directed.

Supply and fixing mild steel framed work as in door chowkats, ornamental gate of angle or other section of grade Fe-290-Gde E-165 with gusset plate rails, braces etc welded/drilled to fixing of steel sheeting or other covering doors etc. to be prepared for sliding or hanging with and including either hooks and hinges or steel hanging door fittings (exclusive steel sheeting or other covering, running rails & guides) and hanging also fastening and fixing inclduing dismantling of old steel gate etc complete all as specified and directed.

Material and labour for PCC 1:2:4 type B-1 (using 20 mm graded mechanically crushed stone aggregate) as copings, bed plates, kerbs, and other bands and the like, finished the surface fair and even, including necessary form work etc including demolition of existing cement concrete of any description and in any position complete all as specified and directed.

Material and labour for 75mm thick PCC 1:2:4 type B2 using 40mm graded mechanically crushed stone aggregate as in hardstanding/paths, finishing the concrete surface even and smooth without using extra cement including forming joints and filling with mixture of bitumen and sand in ratio (1:1) by weight including necessary formwork etc and including demolition of existing old cement concrete in ground floors and pavings n.exc 15cm thickness (below or above) ground level complete all as specified and directed.

Cleaning of under ground sewer lines of any type and size exc 100 mm dia and n. exc 200 mm dia including manhole upto 2 m depth and removing sludge upto 200 mtr of any type of blockage of anykind of manhole or lines by means cleaning through manually by using bamboos, roodding, including desludging descaling & clear the chocking where ever flushing the entire stretch complete all as specified and directed

Cleaning of brick/cement concrete drains of any type and size and removing sludge to 50 mtr distance complete all as specified and directed

Removing blockage from WC's, traps (P-trap/floor trap/nahani trap/gully trap etc) inside the buildings at any floor including cleaning and flushing the pipes upto first man hole as of complaints recieved day to day complete all as directed. Note :- (1) This item inculdes cleaning of each & pipes of toilet block/kitchen irrespective of length of pipes involved up to first man hole and altogether shall be taken as one job for payment purpose.

Cleaning of manholes/grease traps upto 1.5 metre depth and removal of sludge/silt etc in foul conditions to outside MOD land including testing of manholes by filling with water complete all as specified and directed.

Supply and fixing of PVC (SWR) 110 mm pipe single socket in any length with rubber ring joints fixed to wall or in floors including dismantling of pipes of any description any length including bends etc complete all as specified and as directed.

Supply and fixing of PVC (SWR) 75 mm pipe single socket in any length with rubber ring joints fixed to wall or in floors including dismantling of pipes of any description any length including bends etc complete all as specified and as directed.

Supply and fixing of PVC (SWR) bends 110 mm bore complete all as specified and as directed.

Supply and fixing of PVC (SWR) bends 75 mm bore complete all as specified and as directed.

Supply and fixing in repair of PVC (SWR) junction single, (Single T) 110mm bore equal or unequal fitted with access door complete all as specified and directed.

Supply and fixing in repair of PVC (SWR) junction single, (Single T) 75mm bore equal or unequal fitted with access door complete all as specified and directed.

Supply and fixing in repair of 75 mm bore PVC (SWR) vent cowl complete all as specified and as directed.

Supply and fixing in repair of PVC (SWR) floor trap 75mm dia plain with PVC grating including jointing with solvent cement complete all as specified and directed.

NOTE:- Amount of credit of Rs. 36,865.00 for retrieved materials is mentioned in Schedule of Credit Page No 19 of tender documents in pdf form which will be deducted offline while acceptance of tender.