DAY TO DAY MAINTENANCE AND PERIODICAL SERVICES OF CERTAIN MD AND OTM ACCN AT AF STN SAMANA UNDER GE (AF) JAMNAGAR NO 1

Amount

S&F in repair 15mm size angular Stop valves, cast copper alloy, screwed down, CP, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed

S&F in repair 15mm dia size Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed

S&F in repair 15 mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as spd and directed

S&F in repairs 15mm size two way angle valve brass chromium plated, fancy type complete all as specified and as directed.

S&F in repair chromium plated soap tray any type and fixed to plugs on wall with chromium plated brass screws complete all as specified and directed by Engineer-in-Charge

S&F in repair Chromium Plated Grating doom 100mm dia with or without hole complete all as specified and directed.

S&F in repair vitreous china wash basin, white, flat back, size 550 mm x 400 mm fixed on and including cast iron cantilever bracket, 32 mm dia brass waste coupling and including waste fitting and union complete all as specified and directed by Engineer-in-Charge

S&F in repair Vitreous Cliina wash basin, angle back, size 400 x 400 mm white, excluding taps, waste, chain and plug and porcelain stopper but including brackets, 32 mm dia brass waste coupling and, waste fitting and union complete all as specified and directed by Engineer-in-Charge

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as spd and directed

S&F in repair vitreous china wash down water closet pan (pedestal pattern) white with CI 'P' or 'S' trap incl water closet seat cover of plastic,jet etc.complete incl necessary PVC waste pipe fitting, complete all as specified and directed by Engineer-in-Charge

S & F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) incl. all accessories / fittings etc complete all as specified and directed by Engineer-in-Charge

S&F in repair Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed

S&F in repair 10 Litre capacity PVC symphonic action type flushing cistern, duel flush type (ISI Marked) low level with inlet ball valve, float and handle & PVC flush pipe, fixed in position and connecting complete all as specified and directed

S&F in repairs PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed

S&F in repairs PVC waste pipe flexible type suitable for couplings 32 / 40 mm dia and 750 mm long complete all as specified and directed

S&F in repairs brass CP waste coupling (half or full threaded) of 32 / 40 mm size complete all as specified and directed

S&F in repair brass chromium plated shower rose 100 mm of size with arme and with or without swivel joints to steel pipe or union complete all as specified and directed by Engineer-in-Charge

S & F in repair Tubular towel rail, 20mm dia, D type, 600mm long between flanges chromium plated complete all as specified and directed

S&F in repair Towel Ring fixed with and including chromium plated brass screws and wooden/ plastic cleats etc complete all as specified and directed by Engineer-in-Charge

S&F in repair Soap dispenser completes all as specified and as directed by Engineer-in-Charge

Dismantling water tanks exc 250 ltr and n.exc 500 ltr and removing from site complete all as specified and directed

S&F 300 litres capacity triple layer, any coloured rotational molded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc complete all as specified and as directed.

S&F 500 ltrs capacity double layer, rotational molded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position over existing PCC platform incl all fitting such as connection pieces with GI tank nipple for inlet, outlet, etc complete all as specified and directed

Dismantling water tanks exc 500 ltr and n.exc 1000 ltr and removing from site complete all as specified and directed

S&F 1000 ltrs capacity double layer, rotational molded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position over existing PCC platform incl all fitting such as connection pieces with GI tank nipple for inlet, outlet, etc complete all as specified and directed

S&F in repair 25mm dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed

Taking up or down 15mm dia steel tubing and connections, including cleaning for refixing or removal from site complete all as specified and directed

S&F 20mm outer dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed

Taking up or down 20mm dia steel tubing and connections, including cleaning for refixing or removal from site complete all as specified and directed

S&F 32mm outer dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed

S&F CPVC ball valves for 32 mm outer dia pipe complete all as specified and directed by Engineer-in-Charge

S&F in repairs sinks made of stainless steel 1mm thick, kitchen or laboratory, with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including supply and fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as spd and directed

S&F in repairs sinks with drainage board made of stainless steel lmm thick, kitchen or laboratory, with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including supply & fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete as specified and directed.

S&F in repairs Kitchen plate rack made of stainless steel not less than 1mm thick with fixing acessories, overall size 600mm x 900mm x 250 mm , complete all as specified and directed by Engineer-in-Charge

S&F in repair cover lid for 300/500/1000 ltr polythene water storage tank as required complete all as specified and directed by Engineer-in-Charge

S&F in repair Plastic water closet seat, Seat and cover for pedestal pan, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed

S&F in repairs toilet paper holder complete all as specified and as directed.

Taking down chowkats or frame with shutter of any description (without taking out shutter from the frame) not exceeding 1.50 sqm each and removal from site complete all as specified and directed Engineer-in-Charge

Taking down shutter of any description exc 1.00 sqm but n exc 2 sqm each and removal from site complete all as specified and directed by Engineer-in-Charge

S & F for factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube fixed in opening complete as per manufacturer's specifications and as directed by Engineer-in-Charge

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing

S&F Factory Made Solid PVC Moulded Door Shutter with wood free EPS core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site complete all as specified and directed

S&F 75 mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified & directed.

S&F 150 mm long aluminium anodized barrel tower bolts of extruded section complete all as specified & directed.

S&F 125 mm in size aluminium handles cast type anodized complete all as specified & directed.

S&F in repair Curtain rod, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified & directed.

S&F in repair door closer hydraulically regulated designation No 2, aluminium (Die cast) body, universal type suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 Kg fixed & repair complete all as specified & directed.

S&F in repair 100 mm size mild steel body Mortise lock, vertical type, with 4 brass liver, fixed to aluminium door complete.

Hacking out old broken glass (any thickness, size quality or description) from wooden / steel / aluminium frame, including punching or drilling out old glazing pins/spring clips complete all as specified & directed.

S&F sheet glass 4 mm thick ordinary quality(plain/floated/frosted) and glazing with oil putty / wooden beads / aluminium glazing clip in square n.exc. 0.5 sqm in each pane complete all as specified & directed.

S&F sheet glass 4 mm thick ordinary quality (plain/floated/frosted) and glazing with oil putty / wooden beads / aluminium glazing clip in square exc. 0.5 sqm in each pane complete all as specified & directed.

S & F in repair galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aparture 1.18 mm and fixed with tinned tacks ro galvanised wire stapple complete all as specified and directed by Engineer-in-Charge

S & F in repair floor door stopper 140mm size of aluminium alloy body and tounge, anodised, with hard drawn steel spring complete all as specified and directed by Engineer-in-Charge

S&F in repair 100 mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified & directed.

S&F in repair 150 mm long aluminium anodized barrel tower bolts of extruded section complete all as specified & directed.

S&F in repair 125 mm in size aluminium handles cast type anodized complete all as specified & directed.

S & F in repair 250 mm mild steel sliding bolt plate type stove enamelled black with bright bolt not less than 12 mm dia with and including a minium of 6 bolts and nuts four on bolt plate and two on stapple plate and fixed complete all as specified and directed by Engineer-in-Charge

S&F in repair Hasp and staple, safety type 100 mm, of aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws

S&F in repair 200mm, ordinary MS rat tail rod pattern springs including roller and roller plate complete all as specified & directed.

M & L Second class hard wood Beads, straight (any size) for glazed or gauzed joinery, renewed, including mitres etc.. and removing old beads to Store complete all as specified

S&F in repair aluminium three track Powder coated of any color ( thickness of powder coating not less than 50 micron) sliding window with three sliding shutter , the size of outer frame three track 92 x 31.5x 1.20mm ( using two track for glazed window shutter and one track for wire gauged ) , the section shutter size 37x 18x 1.2mm)and glazing with 4 mm thick glass ( plain/floated) including all-around suitable rubber gasket and MS wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4mm and fixed on aluminum flat and inserted in the frame of shutter with tracking arrangement each sliding window shall be provided with one number handle including locking arrangement & 2 numbers’s sliding rollers of nylon with including all necessary fittings complete all as specified and directed by Engineer-in-Charge

Demolition of ashlar facings, dressed stonework, precast concrete articles and precast concrete block walling etc fixed in cement mortar including all quoins, pillars, arches etc. all as specified and as directed.

M&L for providing precast cement concrete (1:5:8) (using 20mm graded stone aggregate) solid building blocks exe 10 cm thick, in width (with plain or inter locking joints as directed) setting in CM 1:6 complete in wall or pillars or kerbstone all as specified and directed.

M&L for rendering 15 mm thick on stone masonary/brick / concrete surface of walls in cement mortar 1:4 complete all as specified and directed(Note:- Quoted rate deemed to carryout wk at height upto 8.00 m)

M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal esistance, dirt resistance exterior paint of required shade (Company Depot Tinted) & in any pattern with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed by Engr-In-Charge. (Note:- Quoted rate deemed to carryout wk at height upto 8.00 m)

M&L 2nd class HW moulding as in cornice, picture rails, frame and like n exc 6 Sec area in Sq cm

Demolition of cement concrete in ground floor and pavings not exc 15cm thickness below or above ground level, all as specified and as directed.

M&L for PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete etc complete.

M&L for 100 mm thick PCC 1:2:4 type B2 using 20 mm graded stone aggregate as in floor / hard standing/Path,etc complete all as specified & directed.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F Pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Supply & Fix 06 mm thick plain, multicavity poly carbonate sheet (coloured) in roof covering, fixed with and including aluminium fillets at joints and aluminium angles at the end, fixed with self drilled screws and standard fittings, fixtures and accessories in repair complete all as specified and as per manufacturer's instructions.

M&L for preperation of old decorated surfaces of wall by brooming down or steel wire brushes scrapping down smoke soot, moulds, efflorescent, salts, etc and applying one coat of cement based paint complete all as specified and as directed by Engr-In-Charge.

M&L for Preparation of old distempered / decorated surfaces of walls including washing, rubbing down and stopping holes, trading oil and greasy spots and applying one coat of Distemper oil emulsion complete all as specified and as directed by Engr-In-Charge.

M&L for Preparation of old distempered / decorated surfaces of walls including washing, rubbing down and stopping holes, trading oil and greasy spots and applying two coats of Distemper oil emulsion complete all as specified and as directed by Engr-In-Charge.

M&L for Preparation of old distempered / decorated surfaces of ceilings including washing, rubbing down and stopping holes, trading oil and greasy spots and applying one coat of Distemper oil emulsion complete all as specified and as directed by Engr-In-Charge.

M & L for preparing old decorated wall /soffit/chajja/fins etc.surfaces, plastered or unplastered and applying one coat of acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489 : 2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (company Depot tinted) with silicon additives complete all as specified and as directed by Engr-In-Charge. (Note:- Quoted rate deemed to carryout wk at height upto 8.00 m)

M & L for preparing old decorated wall /soffit/chajja/fins etc.surfaces, plastered or unplastered and applying two coats of acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489 : 2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (company Depot tinted) with silicon additives complete all as specified and as directed by Engr-In-Charge. (Note:- Quoted rate deemed to carryout wk at height upto 8.00 m)

M&L for prepration of old painted steel surfaces, exc 10 cm width or girth and applying one coat of synthetic enamel paint etc. all as specified and as directed by Engineer-In-Charge. (Note:- Quoted rate deemed to carryout wk at height upto 8.00 m)

M&L for prepration of old painted steel surfaces, exc 10 cm width or girth and applying two coats of synthetic enamel paint etc. all as specified and as directed by Engineer-In-Charge. (Note:- Quoted rate deemed to carryout wk at height upto 8.00 m)

M&L for prepration of old painted steel surfaces, n. exc 10 cm width or girth and applying one coat of synthetic enamel paint etc. all as specified and as directed by Engineer-In-Charge. (Note:- Quoted rate deemed to carryout wk at height upto 8.00 m)

M&L for preparation of old painted wooden surfaces, exc 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and as directed by Engineer-In-Charge.

M&L for Preparation of old painted plaster/ concrete surfaces and applying Two coats of synthetic enamel paint all as specified and as directed by Engineer-In-Charge.

M&L for Preparation of old surfaces of wall surface and applying Two coats of Plastic emulsion over and incl. 1mm thick wall care putty complete all as specified and as directed by Engr-In-Charge.

M & L for re-writing letters or figure (Block, Roman, Italic or Indian) n.exc. 30 mm height with synthetic enamel paint without showing brush mark, complete all as specified and as directed by Engr-In-Charge.(Note:- Quoted rate deemed to carryout work at height upto 8.00 m)

Taking down cement plaster in cement or cement lime mortar on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc, including removal of debries to a distance exc 1.5 km but n.exc 2 Km, complete all as spd and directed

M&L for rendering 15 mm thick on stone masonary/brick / concrete surface of walls in cement mortar 1:6 complete all as specified and directed

M &L 2 coats of oil bound distemper on new surfaces of walls including preparation to distempering to match with existing work complete all as specified and directed

M &L 2 coats of oil bound distemper on new surfaces of ceilings including preparation to distempering to match with existing work complete all as specified and directed

Jagdamba Engineering (BID ID -3179617)

KEVAL ENTERPRISE (BID ID -3179478)

M/s SK Traders (BID ID -3179823)

DWARKADHISH ENTERPRISE (BID ID -3179280)

Pooja Enterprise (BID ID -3179532)

Indice Technologies (BID ID -3179828)

Krishna Bhoomi Enterprise (BID ID -3179495)