Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹10.5 LAdmitted-Finance | -22.12% | ₹10.5 L | L1 | Admitted-Finance |
| 2 | L2₹10.9 LAdmitted-Finance | -19.14% | ₹10.9 L | L2 | Admitted-Finance |
| 3 | L3₹10.9 LAdmitted-Finance | -18.52% | ₹10.9 L | L3 | Admitted-Finance |
| 4 | L4₹11.0 LAdmitted-Finance | -18.00% | ₹11.0 L | L4 | Admitted-Finance |
| 5 | L5₹11.4 LAdmitted-Finance | -14.99% | ₹11.4 L | L5 | Admitted-Finance |
Tender Value
₹13.5 L
EMD Value
₹27,000
Closing Date
4 May 2026, 6:00 pmClosed
EE PHED District Rural Division Kota
EE PHED District Rural Division Kota
Construction and Commissioning of 200mm dia tubewell and providing laying and jointing of pipe line at village ChomaMaliyan, Block - Sultanpur, District Kota
2026_PHCJA_554951_1
NIT No 04/2026-2027
Open Tender
Civil Works - Water Works
60 days
Kota
Please refer Tender documents.
2 documents required · 2 mandatory
₹500
EE PHED District Rural Division Kota
₹27,000
Yes
14 May 2026
29 Apr 2026
5 May 2026
29 Apr 2026
4 May 2026
29 Apr 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | 2.4 Construction of Tube Well up to 100 mtr. depth in all type of rocks by DTH system & over burden to accommodate casing pipe of following sizes in all types of soils & over burden including lowering of casing pipes, (if required) excluding cost of casing pipes, as per IS:2800 Part 1: 1991 and IS:2800 Part II: 1979 (both amended upto date) and technical specifications. The work would be completed after obtaining sand free water. The tube well should have a through out bore as per nominal dia of casing pipe.
Rate is Exclusive of GST.
2.4.2 Nominal bore 200 mm dia. | 100 | Meter | 922.88 | ₹92,288 |
| 2 | 2.4 Construction of Tube Well up to 100 mtr. depth in all type of rocks by DTH system & over burden to accommodate casing pipe of following sizes in all types of soils & over burden including lowering of casing pipes, (if required) excluding cost of casing pipes, as per IS:2800 Part 1: 1991 and IS:2800 Part II: 1979 (both amended upto date) and technical specifications. The work would be completed after obtaining sand free water. The tube well should have a through out bore as per nominal dia of casing pipe.
Rate is Exclusive of GST.
2.4.2 Nominal bore 200 mm dia.
Add 15% extra on above item (Item No 2.4.1 to 2.4.2) for drilling depth beyond 100 mtr and up to 200 mtr from ground level, rate shall be applicable for only extra depth beyond 100 mtr and up to 200 mtr. | 50 | Meter | 1,061.31 | ₹53,065.5 |
| 3 | 2.11 Supply of ERW M.S. black casing pipe ISI marked (IS: 4270/2001) or amended up to date of following sizes
Rate is Exclusive of GST.
2.11.2 200 mm dia NB (Thickness of pipe 5.4mm & mass of tube 28.46 Kg/m) | 40 | Meter | 2,316.95 | ₹92,678 |
| 4 | 2.12 Labour charges for making slots on blank pipes made of ERW MS black pipe ISI marked of following sizes, the slotting should be as per IS:8110-1985.
Rate is Exclusive of GST.
2.12.3 200 mm dia nominal bore of 5.4mm thickness | 20 | Meter | 268.64 | ₹5,372.8 |
| 5 | 2.15 Supply & Installation of 3 phase ISI marked submersible motor pump set of three star or better rating of BEE and as per IS: 8034-2018 (pump) and IS 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/DCB. The job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect.
Rate is Exclusive of GST.
2.15.4 7.5 KW (10 HP) & head above 120 mtr. | 30 | KiloWatt | 7,050.85 | ₹2,11,525.5 |
| 6 | 2.18 Supply and Fixing of electric control feeder panel comprising of suitable rating MCCB , fully automatic star-delta starter, over load relay, ampere meter with CTs, volt meter, phase preventer, suitable starting capacitors, phase indicators, lighting arrangement etc complete suitable for three phase pump set. The panel should have space for energy meter ( supplied by DISCOM). All these equipments shall be housed by panel box made out from 18 gauge M.S. Sheet with powder coating. Panel should be of minimum size 900 x 600 x 450 mm with Stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg s length 18 and double door including in built locking system. The legs should be embedded in M-15 cement concrete plat form. The size of CC platform should be equal or bigger than the base size of panel having height of at least 200 mm from ground level. The panel should have opening of suitable size in front of space for energy meter with glass for meter reading. The operation of panel should be suitable for on 440 Volt AC Supply.
Rate is Exclusive of GST.
2.18.2 Above 10 HP and up to 15 HP | 4 | Each | 23,583.9 | ₹94,335.6 |
| 7 | 2.19 Supply & Fixing of ISI marked three core PVC flat submersible cable as per IS 694:1990 or amended up to date and conductor as per class 5 of IS 8130:1980 including making connection etc.
Rate is Exclusive of GST. 2.19.2 3 core 6.0 Sq.mm | 200 | Meter | 239.83 | ₹47,966 |
| 8 | 2.20 Supply & Fixing XLPE insulated / P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor Armoured of IS:7098-I/1554-1 approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand, second Class bricks covering, refilling earth, compaction of earth, making necessary connection, testing etc. as required of size.
Rate is Exclusive of GST.
2.20.2 16.0 Sq.mm, 4 core | 50 | Meter | 198.31 | ₹9,915.5 |
| 9 | 2.22 Supply & Fixing M S clamp set of 50x6 mm flat from iron with nuts and bolts etc for holding the riser pipe assembly of submersible pump set.
Rate is Exclusive of GST. | 2 | Each | 589.83 | ₹1,179.66 |
| 10 | 2.23 Supply & Fixing tube well cover of MS sheet 8mm thick at top & 5mm thick 100mm wide shroud around the edge so as to form a cap on the top end of casing pipe with GI Nipple 45cm long & two GI flanges at both ends in 80mm sizes passing through a hole in the centre of MS sheet. A 25 mm socket with end plug shall also be welded over top plate. A GI nipple having outside thread of size 1/2 (for installation pressure gauge) shall be provided & welded with 80mm GI nipple near top plate nipple shall be provided with end plug.
Rate is Exclusive of GST.
2.23.3 200 mm dia | 1 | Each | 835.59 | ₹835.59 |
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.27 MB
TD04.pdf
Tender Documents • 5.35 MB
BOQ_988273.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid