SPECIAL REPAIR/ RENOVATION TO BLDG NO. T-35 AND T-37 (PM SHED) OF ASC (SUP) TYPE G AND BLDG NO T-117 OF GR UNDER GE DEHRADUN

Amount

Demolition brick or stone masonary built in cement mortar including all quoins arches pillars etc but excluding ashlars facing dressed stone work and precast concrete block, complete all as specified and as directed by Engr-in-Charge.

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level).

M&L brick work with sub class 'B' brick straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6 including all quoins, arches, pillars etc complete all as specified

Ditto as item No. 03 above, but except brick complete all as specified.

M&L Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted built in cement mortar 1:6, incl bond stone complete. all as specified and directed.

M&L Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted built in cement mortar 1:6 except stones complete. all as specified and directed.

Taking down cement plastering of any description on brick/stone/concrete wall surfaces of any description incl racking out joints hacking for key,scrubbing down with water etc. complete all as specified and as directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished surfaces even and smooth complete all as specified and as directed by Engr-in-Charge.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished surfaces even and smooth complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of newly plastered surface of wall and applying two coat of cement base paint over a coat of primer complete all as specified

M&L for preparation of newly plastered surface of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified

Taking down wooden chowkhats or frames with shutters area n. exc 1.5 sqm each (without taking off shutter from the frame) complete.

Taking down wooden chowkhats or frames with shutters area exc. 1.5 Sqm but not exceeding 4 Sqm each complete.

S&F Pressed steel frames of size 125x65 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified (Note: framed filled in cement concrete1:2:4 type B0 using 12.5 mm graded stone aggregate)

M&L mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, ball bearing and other similar works etc, complete, drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding complete all as specified

M&L 35mm thick 2nd class hard wood factory made plain framed panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply.The size of rail and stile as per IS:1003 (Part1),kiln seasoned and chemically pressure treated, all as specified and directed.

S&F mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 including necessary welding, drilling hole complete.

S&F of steel ventilators, fixed/ hinge type, with glazing bars complete all as specified and directed.

S & F factory made steel window with side hung shutters including box type hinges with steel handle, steel peg stay,tower bolt etc. complete with glazing bars, dovetailed or welded complete all as specified.

S & F factory made steel window with side hung shutters including box type hinges with steel handle, steel peg stay, tower bolt etc.complete without glazing bars, dovetailed or welded complete all as specified.

S&F stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm complete all as specified

S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in square area n. exc. 0.5 Sqm in each pane complete all as specified.

S & F stainless steel barrel tower bolts 150 mm long one piece and fixed complete all as specified

S & F mild steel butt hinges, medium weight 100 mm long one piece and fixed with screws/welded to frame ,complete

S & F stainless steel handles 125 mm long one piece and fixed with screws/welded to frame ,complete

S & F 300 mm long stainless steel sliding door bolt (bolt not less than 12 mm dia) with hasp & staple and fixing clips of SS sheet, and SS fixing bolts and fixed complete.

M & L floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring, fixed to floor of size 140 mm complete.

Taking down/ dismantling asbestos (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified.

Dismantling of framed or unframed timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed

S&F for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe 410-W(Gde E-250) quality-A complete all as specified and directed. (Note: Hollow steel sections will not be used against this item).

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws and profile should match with galvalume sheet complete all as specified and as directed.

M & L applying two coats of synthetic enamel paint on new or previously untreated steel surfaces of any description over 10 cm width or girth over a coat of red oxide primer including preparation of steel surfaces complete.

M & L applying one coat of synthetic enamel paint on old painted steel surfaces of any description including preparation of steel surfaces complete.

M & L preparation of old painted surfaces of wood & wood based material of any description over 10 cm width or girth and applying one coat of synthetic enamel Paint complete all as specified

M & L preparation of old painted surfaces of wood & wood based material of any description over 10 cm width or girth and applying one coat of creosote oil Paint complete all as specified

M&L for 25 mm thick cement concrete type B-0 1:2:4 (12.5 mm graded stone aggregate) as in floor finished complete all as specified and as directed.

M&L for Machine cut kota stone slab flooring 18-20 mm thick over 20 mm thick cement mortar 1:6 screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and as directed.

M&L for Machine cut kota stone as in skirting 16-18 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified.

M&L cutting holes in brick wall built in cement mortar exc half brick but nexc one brick for inserting or cement concrete 1:2:4 hold fast etc and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required.

M&L for 75 mm thick PCC 1:3:6 type C-1 using 20 mm graded stone agg as in plinth protection finished surfaces even and smooth without using extra cement complete all as specified and as directed.

M & L PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in benching to drain, holdfast, padding to roof/chhajja, coping, bed block etc. and the like edge slightly rounded or chamfered including necessary use and waste of form work and demolition of existing old cement concrete (un-reinforced) not exc 15 cm thick in ground floor and paving below or above ground level complete.

Excavation in trenches not exceeding 1.50 metre wide and not exceeding 1.50 metre depth for foundation, manhole etc not exc 10 Sqm on plan and not exc 1.5 metre in depth including getting out in soft/loose soil complete all as specified and directed by Engr-in-charge.

M & L PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation filling, mass concrete, sub base or leveling course of floor etc complete all as specified.

M & L PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in surface channel and drain including necessary use and waste of form work complete all as specified

Returning, filling in including spreading, leveling watering and well ramming in layers not exceeding 25 centimetre in soft/loose soil complete all as specified and directed by Engr-in-charge.

Removing excavated surplus soil/material not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed by Engr-in-charge.

M&L Hardcore of broken bricks or boulder gauge exc 63 mm but n. exc 100mm, deposited , spread and levelled in layers n.exec 15 cm thick, watered and rolled/rammed to a tue surface complete all as specified.

M&L 75 mm thick PCC 1:4:8 type D-2 using 40 mm graded stone agg as in sub base complete all as specified and as directed.

M & L for sand filling under floors or in foundations including spreading & levelling complete all as specified directed.

M & L for pre-painted coloured (Red/Yellow) machine pressed precast concrete interlocking paver blocks of any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 grade with grey cement and pigment complete all as specified and directed.

Providing & fixing false ceiling of Designer tile Ivory painted (High Pressure Steam cured) of 4mm thickness (as per IS : 14862) of size 595x595mm and any one of the design (Cascade or electra) in true horizental level, suspended on inter locking metal grid of hot dipped galvanised steel section (Galvanised @120 grms, both side inclusive and black painted groove on all T webs) consisting of main T runner with suitably spaced joints to get required length and 15x32mm made from 0.30mm thick sheet spaced at 1200mm c/c and croos 'T' of size 15x32mm made of 0.30mm sheet 1200mm long spaced between main "T" at 600 mm c/c to form a grid of 1200x600mm and secondary cross "T" of length 600mm and size 15x32 mm made of 0.30mm thick sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x22x0.40mm and laying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable wire of 4mm dia with galvanised butterfly level clips, spaced at 1200mm c/c along main 'T', bottom exposed width of 15mm of all 'T'' sections of 4mm dia GI wire shall be pre-painted with polyester paint and black painted groove at center of size 4mm depth and 4.5mm width, including taking down existing ceiling of any type all complete at all heights as per direction of Engineer-in-Charge.

M&L for Point wiring with1100 Volts, grade 1.5 Sqmm. (nominal area) ,PVC insulated but unsheathed multistranded copper conductor single core FRLS cable drawn through and including non metallic medium duty rigid PVC concealed conduit (medium duty) 20mm dia or higher size complete with all accessories such as socket, elbow, junction box, bell mouth, bend, reducer etc including pressed iron/steel suction box of thickness1.2mm for mounting of switches, sockets, fan regulators etc with 3 mm thick plastic laminated sheet as top cover, and 1.5 Sqmm. (nominal area) single core FRLS,PVC insulated 1100 Volts, grade multi stranded unsheathed copper conductor cable green colour as earth wire upto common earth and connected to earth dolly including cutting chases for conduits and sinking's for boxes and making good to walls,floors etc complete all as specified and directed by Engr.-in-charge of following. Note : The wiring to be done as per IE rule and maintain colour code accordingly.

One light point controlled by one way switch.

Add to item no 54.00 for each additional light point on the same switch circuit

One three pin 5 Amp socket on independent board

One Cieling fan point , controlled by one way switch through Regulaor

One three pin 5 Amp socket on same board with other switches

All as per Item No 54 mentioned here-in- before but one three pin 15 Amps switch socket out let on the independent board with 2.5 sq mm PVC insulated FRLS copper conductor and 2.5 Sqmm FRLS copper conductor for continuous earthing complete.

S & Fix Switch piano flush type single pole one way 230 Volts 6 Amp complete all as directed.

S & Fix in repairs for Socket outlet 3 pin , 230 Volts 5/6 Amps flush type multipurpose 5 pin complete. M

Supply and fix in repairs for Socket outlet multipurpose having provision for 3 pin, 230 Volts 15/16 Amp and 3 pin, 5/6 Amp, piano flush type IS: 1239-1988 marked with valid CML No complete all as specified.

Supply and fix in repairs for Switch piano; flush type, single pole, one way, 230 Volts 15/16 Amps IS: 3854 marked with valid CML No. complete all as specified

Supply and fix in repairs for Ceiling rose, Three terminal ISI marked surface bakelite suitable for batten fitting complete all as specified

S&F Industrial Lighting ,70 Watt with Eco weii glass in PDC housing with a luminaire efficiency of 110 Lm/w, Superior tampered fin design with exeptional thermal management ,ingress protection of IP66 complete all as specified and directed.

S&F wall mounted LED tube light fitting 1x20 watts extruded aluminium polycarbonate covers PF 0.9 and above operating voltage 140V-270V colour temp 6500K & lumen input output 95 Lumen per watt and connected to ceiling rose with required length of two core flexible copper cable 23/0.0076 fixed on wall/roof complete all as specified and directed.

S&F in replacement of energy saving ,surface mounted, LED 10 watt Bulk head luminaire with decorative oval diffuser comprrising of high brightness LEDs complete all as specified and directed by Engr-in-charge.

Supply and fixing in replacement for Distribution board SPN 8 Way double door, for mounting MCBs isolator, ELCBs etc factory made, IS: 13032 marked with valid CM/L No fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral and earthing link and bus bar. DBs shall be semi glossy finished with epoxy polyester based powder paint sprayed and baked at high temperature, painted in seven tank process. The DBs shall be of IP 43 protection.Note:- DB and MCCB/MCB shall be of same make

Supply and fixing in replacement for Distribution board SPN 4 Way double door, for mounting MCBs isolator, ELCBs etc factory made, IS: 13032 marked with valid CM/L No fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral and earthing link and bus bar. DBs shall be semi glossy finished with epoxy polyester based powder paint sprayed and baked at high temperature, painted in seven tank process. The DBs shall be of IP 43 protection.Note:- DB and MCCB/MCB shall be of same make

S&Fix in repairs MCB single pole 240 volt, 10 KA, 5-32 Amp, 'C' series confirming to IS complete all as specified and directed.

S&Fix in repairs MCB SPN 240 Volt 10 KA 20- 32 Amp 'C' series conforming to IS complete all as specified & directed.

Material and labour for earthing complete with galvanized steel plate electrodes of size 600mm x 600mm x 6mm thick buried directly in ground with earth pit not less than 2.25m deep below normal ground level with top edge of plate not less than 1.5 m below normal ground level connected to galvanized wire 4 mm earth lead by means of nuts bolts check nuts GI washers earth wire protected by galvanized iron pipe 15 mm bore (light grade) including concrete pit in PCC (1:3:6) type CI, precast RCC cover slab of size 30x30x10 cm with one handle for lifting made out of 8 mm dia MS bar funnel wire mesh 20 mm bore galvanized iron pipe (medium grade) for watering charcoal or coke and salt in alternate layers necessary earth work in soft/loose soil complete all as shown in electrical plate No 5 of SSR part 1 including testing on completion all as specified and directed. incl demolition to existing one complete.

M&L for sub main wiring with 2 Single core PVC insulated unsheathed cable 1100 Volts grade heavy duty copper conductor multistranded of size 4 Sqmm (nominal area) drawing in and including 20 mm dia or higher medium duty PVC concealed conduit/flexible conduit where reqd and conduit accessories and fittings. Including one single core green colour PVC Insulated unsheathed cable copper conductor multistranded of size 4 Sq mm as earth wire upto common earth and connected to earth dolly complete incl taking out old unserviceable submain all as specified & directed.

Supply & Laying XLPE insulated armoured heavy duty electric cable , with multi stranded aluminium conductor served with an inner sheathing of PVC type armoured with galvanized steel wire or tape and PVC sheathed 1100 volt grade,nominal cross sectional area 10 Sqmm 2 core inclu lugs and heat shrinkable PVC Sleeves on exposed surfaces & teflon tape duly insulated complete laid in trenches, ducts, drawn through pipe across the road/path/alongpoles/wall/floors/equipment etc including jointing and testing complete all as specified and directed by the Engr-in-charge.

M&L for sand cushioning in trenches for protection of UG cable with river based sand laid dry in trenches before and after laying of cable, incl well ramming complete all as specified and directed

M&L for providing of new sub class 'B' bricks, old size, well burnt laid flat dry for protection of under ground cable complete all as specified & directed.

Supply & Laying in replacement of GI Steel tubing light grade 40 mm dia including all fitting laying in trenches across road or grouting /fixing on wall for protection of cable complete all as specified and directed by Engr-in-charge.

Taking down carefully copper /aluminium point wiring (light, fan , socket or power ) any type including unscrewing from board,fitting and fixture such as switches, ceiling roses, holders, regulators sockets ,light fittings etc removing materials from site and making good disturbed with the existing surfaces complete all as directed.

S & Fix step type regulator socket type double module 5 step for ceiling fan 1200/1400 mm size 230 volts, 6 Amps 120 watts.

S & Fix Lamp holder polycarbonate insulated body, with back plate suitable for batton fitting.

Removing and Refixing of old sreviceable tube light fittings/any type of lts fitting with cable connection after complete rewiring

S&F Ceiling fans complete with blades ,down rods, and accessories, 230V,1200mm sweep,340 RPM,200CMM,50Watt copper wound with suitable size of fixing arrngement to MS channel or Angle iron arms as all specified & directed directed

M/S JAI PRAKASH GOEL (BID ID -3119542)

R K BUILDERS (BID ID -3127719)

AYUSH CONSTRUCTION COMPANY (BID ID -3129650)

Alankar Traders (BID ID -3129006)

V S ENTERPRISES (BID ID -3126399)

MOHAN LAL GUPTA (BID ID -3106574)

VERDHMAN ASSOCIATES (BID ID -3119602)

G S CONSTRUCTIONS (BID ID -3129726)

M/s RAM RATAN AND SONS (BID ID -3129853)