Construction of Community Sanitary at Perali ZPHS High School 2 units in Karlapalem Madal of Bapatla District.Est.Cost.6.00 Lakhs.

Earth Work Excavation and depositing on bank with an initial lead of 10 m and 2 m lift in loamy clayey soils including all labour charges etc., complete,

Sand Filling in foundation and basement with watering and tamping including cost and conveyance of all materials and all latiour charges etc complete

PCC(1:4:8)mix using 40 mm HBG metal including cost and conveyance of all materials and all labour charges et complete

VRCC(1:2:4)using 20mm HBG metal including cost and conveyanre of all materials and all labour charges etc complete but excluding cost of steel and its fabrication charges for square footing & Pedastal for Gents

VRCC(1:2:4)using 20mm HBG metal including cost and conveyanre of all materials and all labour charges etc complete but excluding cost of steel and its fabrication charges for footing & Pedastal

VRCC(1:2:4)using 20mm HBG metal including cost and conveyanre of all materials and all labour charges etc complete but excluding cost of steel and its fabrication charges for Plinth Beam for Gents

VRCC(1:2:4)using 20mm HBG metal including cost and conveyanre of all materials and all labour charges etc complete but excluding cost of steel and its fabrication charges for From Plinth Beam Top to Below Roof level beam

VRCC(1:2:4)using 20mm HBG metal including cost and conveyanre of all materials and all labour charges etc complete but excluding cost of steel and its fabrication charges for For Roof beam All Round

VRCC(1:2:4)using 20mm HBG metal including cost and conveyanre of all materials and all labour charges etc complete but excluding cost of steel and its fabrication charges for Roof slab of 115 mm thick for Gents

Brick Masonry in CM(1:6) including cost and conveyance of all materials , all labour charges and seignorage charges etc.complete.

Cost and supply of Steel Fe 500 including fabrication charges and labour charges etc. Complete

Accoproof Plastering with CM (1:3), 12mm thick using accoproof Including cost & conveyance of all materilas and lapour charges etc., complete

Platering in CM(1:5), mix 12 mm thick including cost anc conveyance of all materials and all labour charges etc.complete

Painting to new walls with two coats of acylic interior emulsion paint having VOC (volatile Organic Compound) content less than 50 grams/ titre of approved brand and shade over a base cost of appropriate primior of sponsred brand, making three coats in all to pive an oven shade ster throughly brushing the surface to remove all diet and rainains of loose powdered materials including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc, complete, for finished item of work as per 55.911 for Intermel walls (APSS No: 9128)

Cost and supply of precasted RCC well rings including conveyance charges etc., complete. for leach pits .

Cost and supply of 1000mm dia RCC precast cover slab including cost and conveyance of all materials and all labour charges etc.,complete . for leach pits .

Flooring with ceramic tiles 7 to 8mm thick 1st quality non skid floor tiles of scratch free of nano finish of size 300x300mm of IS: 137I E,137T 2,13630 of any colour set over a base coat of CM (1:8) 12mm thick over already laid cement concrete bed including neat cement slurry at 3.30 kgs per sqm and jointing neatly with white cement paste to full depEh of slabs laid on already laid cement concrete bed set oyer base coat of C d {1:8) 12mm thick including neat cement slurry spread at 3.30 kgs per sgm and jointing to full depth of ceramic tiles including cost and conveyance of all materials and labour charges, filling joints neatly, dressing of flooring stones, etc., (DC 7-6)

Providing dadooing to walls with Nano polished /stain free soluble salt porcelain vitrified tiles screen printed of size 300 x 450 mm and thickness between 6 mm 1st quality conforming to IS:13711, IS: l3712, IS:13630 (Parts 1 to 15 ) of any colour and finish in all shades and designs set oyer base COBt Of CMt1:5§ 12 mm thick with cement slurry of horiey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth including cost of all materials like tiles, cement, sand and water etc., complete. including seignorage charges etc., complete for finished item of work.

Cost and supply of cement JALI -50mm thick including conveyance of charges etc., complete. BMS-W.17

Supply and fixing of WPC shutters madeup of WPC Door of size 0.75 x 2.00mts includingall iron furnature / fixers such as hinges, tower bolts and wind applinces with cost and conveance of all materials and all labour charges etc., complete. (BMT-N.92)

Supplying and Fixing European ISI Water Closet of 1st quality conforming to IS:2556-Part-2-1973 ofwhite glazedwith 'S'trap BMW-D.14

Supply and fixing of white glazed flat back bowl urinals of size 440 mm x 265 mm x 315 mm with internal rim flushing mm fixied with screws complete inidan make (HS W/Parry/Neycer) conforming to IS 2556 -1995 as approved be Engineer - in - charge 12.7 mm PVC connection with brass plumber union nuts CM Coated. including 12.70 mm push cock 1st qulaity of approved make including supply & fixing 31.75 m dia PVC flexible waser pipe of 914.40 mm lenght of 1st including cost and conveyance of all materials to site labour charges etc., complete for finished item of work for all floors

Supplying & Fixing porcelain foot rest for squatting I.W.C. (Rectangular pair) of sizes 250 mm x 125 mm x 15 mm thick each foot rest 1st quality ISI marked conforming to IS:2556- Part-10:1974 including cost and conveyance of all materials to site, labour charges , overheads & contractors profit for finished item of work

Supplying and fixing NP bib taps of size 12.70mm dia of Indian make Seiko or equivalent including cost and conveyance of all materials, labour charges etc., complete for finished item of work in all floors.Urinals Bowls for Gents

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007) for 22.20mm ODPipe - SDR 13.50 CPVC pipe

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007) for 28.60mm ODPipe - SDR 13.50 CPVC pipe

Supplying and fixing of SWR / PVC pipes (as per ISI standards) 4 Kg/Sq.cm. Prince/sudhakar or any ISI brand and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges etc.complete for finished item of work at all floor levels. (APSS No. 1302 1319 & 1326) for PVC pipe of 75mm dia

Supplying and fixing of SWR / PVC pipes (as per ISI standards) 4 Kg/Sq.cm. Prince/sudhakar or any ISI brand and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges etc.complete for finished item of work at all floor levels. (APSS No. 1302 1319 & 1326) for PVC pipe of 110 mm dia

Supply and Fixing of 20 mm dia 1.40 -1.55 mm thick P.V.C. Conduit pipe (ISI MARK) including all labour charges etc., complete. ELEC-1.2.2 a for P.V.C Pipe

Providing and placing on terrace (at all floor levels) polyetheylene water storage tank with double layer approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet and outlets and over flow pipes but without fittings and base support for tanks including cost and conveyance of all materials and labour charges for placing and fixing in position as directed by Engineer-in-Charge.

Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with 6A switch, Ceiling rose and 8 Modular Horizontal / Vertical Cover Frame covering to switch control box including all labour charges etc., complete.,

Supply and fixing of batten holder / slanting holder in lieu of ceiling rose of light point complete with all connections and all labour charges with 40W bulb (for new installation).