Police

Providing & Placing ofReception table with following details and specifications: Top legs modesty are made of 18mm thick e-1 grade particle board finished with 2mm pvc edge banding. E1 Grade laminate with zero urea faormaldyhyde(<or=8mg/100g oven dry board pre- formed methode) for better in house air quality. This should comply with(EN120-1992). The exposed edge of workshop shall be secured with 2mm thick pvc edge banding. Suspended panel is made of 18mm thick e-1 grade particle board finished with 2mm pvc edge banding. grommet provided for work desk,

Providing and placing of waiting Bench of the following specifications. Metal structure with perforated metal seat and backrest

Providing & Placing of Table with following details and specifications : Table Top and legs are made of 25mm E-1 grade particle board finished with 2mm PVC edge bandin. The 18mm Thick Modesty panel is made of E-1 grade particle board finished with 2mm PVC edge banding.Drawer Unit : 3 drawer melamine finish pedestal of overall dimensions internal and external dimensions 390-420 mm (W) x 430-460 mm (D) x 600-620 mm ( H). Drawer should be made of 18mm thick E1 Grade particle board with matching edge banding. Each pedestal should have 5 Nos castor fitted. One castor to be fitted to lower most drawer to provide extra stability.

Providing & Placing of Table with following details and specifications : Table Top and legs are made of 25mm E-1 grade particle board finished with 2mm PVC edge banding.The exposed edge of worktop shall be secured with 2mm thick PVC edge banding. The 18mm Thick Modesty panel is made of E-1 grade particle board finished with 2mm PVC edge banding. The exposed edge of worktop shall be secured with 2mm thick PVC edge banding. Completely concealed wiremanagement with Aluminium anodized flipper with soft closure, wiring tray & beams Made from MS sheet 2 mm., flange structure epoxy powder 70-80 micron coated spray color, baked at temperature 200c with vertical wire uptake from floor via middle leg having removable cover. Drawer Unit : 3 drawer melamine finish pedestal of overall dimensions internal and external dimensions 390-420 mm (W) x 430-460 mm (D) x 600-620 mm ( H). Drawer should be made of 18mm thick E1 Grade particle board with matching edge banding. Each pedestal should have 5 Nos castor fitted. One castor to be fitted to lower most drawer to provide extra stability.

able: Supply and fixing of Leaner Table with using of 50mm thick Hallow partition upto 900mm Height and providing provision for electrical wiring on below Table top and 18mm thick Prelaminated particle board for Top and Verticle panels and fixing with 1”x1” L claps with all necessary hardware and approved colour asper selected by Engineer in charge Size: 750/900x600 (3+2 Seater)

Chair: Supplying of S type chairs with seat and back cushion and Fabrick finish with 1” dia round pipe stand with fixed arms.

Providing & Placing of Slotted Angle Racks Vertical Pillar are made up of Sheet Angles, of size 40x40mm prepared from Virgin CRCA Sheet of IS : 513 CR2.., duly epoxy powder coated. A total of 6 Shelves making 5 compartments, are made up of 0.8 mm thick, duly epoxy powder coated CRCA of 0.8 mm thickness, with 8 bends, along with a bottom stiffener in 0.8 mm thickness to make it capable of taking a load of 30-40 kg UDL. Levelling bolts made up of Nylon with M6 bolt are to be placed at bottom to absorb the unevenness of the floor.

Providing & Placing of Full Height Storage with Shelves, Body of storages made out 18 mm thick Particle Board (E-1 Grade), melamine finishes with 2 mm PVC edge-banding. E1 grade laminate to be used which provide no urea formaldehyde emission and formaldehyde should be phenol base with emission of not more than (<or= 8mg/100 g oven dry board-perforated method) for better in-house quality. This should comply with (EN 120-1992). Front of Medium height Storages should be made out of 16 mm thick Particle Board (E-1 Grade) melamine finishes with 2 mm PVC edge-banding fitted with extruded aluminum handle, as per requirement. Top should be 25 mm thick Particle Board (E-1 Grade), melamine finishes with 2 mm PVC edge-banding. Storages should be provided with adjustable levelers. Door Lock as per manufactured std, the hinged doors can be locked at once. Door should be provided with Hinge-damping mechanism to enable soft closing of doors. size (1.50x0.45x2.00mtr)

Providing & Placing of Center Table with following details and specifications :Top is made of 25mm thick E-1 grade particle board finished with 2mm PVC edge banding. E1 grade laminate with zero urea formaldehyde emissions (<or= 8mg/100 g oven dry board-perforated method) for better in-house air quality. This should comply with (EN 120-1992). The exposed edge of center table shall be secured with 2mm thick PVC edge banding. Top Suppoted on metal powder coated Loop leg of section 25 x50mm,where Structure made from cold rolled steel,thickness 1.2 mm. Epoxy powder coated spray paint, baked at temperature 200 C° coated of 80-90 micron thickness.

Wall mounted Notice board Frame work shall consist spine of aluminium extruded section of minimum thickness of 1.2 mm. The overall thinkness of Panel base System should be minimum 25-28mmmm thick. Finishes of panel can be fabric pinup/fabric + Glass/metal writable marker board or single finish.