DEPOSIT-Eloor Municipality-Extension of pipeline to various wards in Eloor Municipality-Pipeline Work

Amount

Working charges

15.59:Dismantling of flexible pavement ( bituminous courses ) by mechanical means and disposal of dismantled material up to a lead of 1 kilo metre, as per direction of Engineer-in-charge.

15.2.1:Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

16.83:Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.

100.1.1:Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering, etc., and disposing of surplus excavated soil as directed, within a lead of 50m, in all kinds of soil.

100.8.1:Fencing one side of trenches, 1.50m height with two rows of 10cm plastic caution tape in vertical casuarina pole (girth 15cm to 24cm) fixed at 2m intervals.

100.9.6:Laying uPVC pipes of class 2 to class 6 and specials, lowering to the trenches already made, placing in position aligning the pipeline to the lines and levels and jointing the pipes and specials with solvent cement and testing the pipeline with water to the required test pressure (excluding cost of pipes and specials): 63 mm nominal outside diameter pipes.

100.9.9:Laying uPVC pipes of class 2 to class 6 and specials, lowering to the trenches already made, placing in position aligning the pipeline to the lines and levels and jointing the pipes and specials with solvent cement and testing the pipeline with water to the required test pressure (excluding cost of pipes and specials): 110 mm nominal outside diameter pipes.

50.18.9.20.8:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia End cap

50.18.9.20.4:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia Bend

OD158630/2022-2023:Shifting/Changing water connection from the existing distribution line to newly laid mains upto 110mm dia PVC to an average length of 3m,using 20mm Indian Standard Class 6 UPVC pipe and UPVC/GM/Brass Specials viz.brass ferrule, GM full way wheel valve,Elbow, MTA,FTA,Couplers, GI/MS/SS Service Saddle of suitable size etc and connecting with the mains, testing the jonts etc complete including trenching and refilling in all kinds of soil upto a depth of 1.50m for main line tracing and trench of average cross section 0.3m x 0.75m hire for tools, cost of consumables and labour charges , cost of materials, including charges for lighting, watching, providing caution boards, traffic control etc. complete but excluding the cost of cutting of concete/tarred/bituminous roads and as per the direction of the department officers

100.37.6.1:In situ fabrication of M.S. pipes of size 150mm (I.D.) using 8mm thick M.S. plate including cost and conveyance charges of M.S. plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under-coat of primer etc., complete.

100.37.6.2:Fabricating M.S. flanges of diameter 150mm using 12mm thick M.S. plate including cost and conveyance charges of M.S. plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under-coat of primer etc., complete: For pipes fabricated with 8mm thick M.S. plates.

100.37.6.3:Cutting 150mm (I.D.) M.S. pipes for making bends and other specials by gas cutting including cost of gas, all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.

100.37.6.4:Welding 150mm (I.D.) M.S. pipes for making bends and other specials by gas/electric welding machine including cost of gas and welding rods, all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.

100.37.6.5:Grinding cut and weld edges of 150mm (I.D.) M.S. pipes during fabrication work including all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.

OD159260/2022-2023:Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

OD159293/2022-2023:Supply and wrapping of Tarfelt sheet around the pipe, the sheet shall be made with bituminous material and must be Water Proof, Tamper Proof, Corrosion Resistant, and Durable Coating. The sheet should have a thickness of not less than 1.5mm etc.. complete, as per the direction of the Engineer in charge.

100.32.3:Conveying and fixing C. I. Double Acting Air Valve of approved quality with bolts, nuts, rubber insertions etc., complete, but excluding the cost of air valve (tail pieces, if required, will be paid separately): 50mm Double Acting Air Valve.

OD158792/2022-2023:Interconnection of existing 110 mm PVC line with newly laid 63 mmPVC line using 110x32mm saddle,32mm MTA ,Nipple,32mm PVC pipe,32mm bend,63x32mm reducer including earth work excavation ,cost and conveyance of all materials and labour charges etc.complete. as per the direction of Engineer in charge

OD158794/2022-2023:Interconnection of Existing 75mm PVC Pipe with new 63 mm Pvc using 63 mm x75mm PVC reducer including all material and labour charges etc complete

OD158795/2022-2023:Interconnecting 63mm PVC with existing 63mm PVC line by tapping using 63mm*63mm saddle,63mm*32mm PVC reducer,32 mm PVC bend,32 mm MTA,32 mm nipple,32 mm PVC pipe including all material and labor charges, etc complete as per the direction of Engineer in charge

OD159466/2022-2023:Interconnection in 150mm MS with 110mm PVC using 150 mm CID joint,160 mm*110mm reducer including all materials and labor charges, etc. complete as per the direction of the Engineer in charge

OD159448/2022-2023:Interconnection in newly laid 150mm MS with existing 160mm pvc using 150mm CID joint , materials and labour charges etc. complete

50.18.9.22.10:Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement -110 mm dia End Cap

50.18.9.22.4:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement- 110 mm dia Bend

16.84:Laying old cement concrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (Old CC paver blocks shall be supplied by the department free of cost.)

4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

4.1.2:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:1/2:3 (cement : 11/2 coarse sand : 3 graded stone aggregate 20 mm nominal size)

Material Cost

100.98.211:Supply of PVC Pipe, 6kg/cm2, 63mm Dia.

100.98.214:Supply of PVC Pipe, 6kg/cm2, 110mm Dia.

100.98.435:Supply of CI Air Valve, Conforming to IS 14848 - 2000, Kinetic Air Valve Type DK, Size 50mm.

ABDUL SAMAD K B

Bidder Name

K M MADHU

ABDUL SAMAD K B