DPT 2020-21 ADAT GRAMA PANCHAYATH PURANATTUKARA HEALTH CENTRE MAINTENANCE IN PUZHAKKAL BP (S0353/21)

Amount

Building Maintenance

4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

od896435/2020_2021 : Providing and laying Eurocon floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete.

15.7.4 : Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar

od940095/2020_2021 : Interlocking cobbles 60mm thick (using deptl. materials) minimum strength 4kg/cm2 over a bed of 6mm metal<br>filling in 50 mm average thick and compacting using earth hammer compacting machine hand operated<br>including cost and coveyance of all materials labour charges pointing edges etc. complete

od940091/2020_2021 : Interlocking cobbles 60mm thick minimum strength 4kg/cm2 over a bed of 6mm metal<br>filling in 50 mm average thick and compacting using earth hammer compacting machine hand operated<br>including cost and coveyance of all materials labour charges pointing edges etc. complete

od950358/2020_2021 : engaging labours

15.28.1 : Dismantling roofing including ridges, hips, velleys and gutters etc., and stacking the material within 50 metres lead of :G.S. Sheet

50.10.1 : Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

od896442/2020_2021 : Supplying and fixing 150 mm dia PVC rain water gutter semi circular section including fitting with 20 mmx 3 mm MS flat supportes at 1 m

od896443/2020_2021 : Ridge capinging with pre painted galvenised steel sheets 0.35 mm thick 60 cm wide including all<br>cost and materials, conveyance, labour charges etc. complete.

od896445/2020_2021 : Roofing with GI hard colour powder coated traffod sheets 0.35mm thick or nearest<br>available thickness with overlaps of 150mm at ends and GI hook or crank CI bolts and nuts including plian<br>washers and bitumen washers etc complete<br>

50.18.9.17.2 : Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 63 mm dia 4 Kgf/cm2- External work - exposed on wall

od940117/2020_2021 : Providing and fixing aluminium work ( minimum thickness of powder coating 50 micron) consisting of tee /angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-Charge ( level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately ).

21.5 : Providing and fixing powder coated aluminium work ( minimum thickness of powder coating 50 micron) consisting of tee /angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-Charge ( level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately ).

od940127/2020_2021 : Providing and fixing false ceiling with 9 mm thick PVC wooden grains panel board ceiling of approved quality in aluminium frame work with necessary screws etc complete ( aluminium frame work shall be paid separately)(modified 50.12.4.2)

Manikandan

Bidder Name

Manikandan

ANOOP SATHIAN