PROJECT NO 151/26 MANACHAL BRIDGE BEAUTIFICATION

Electrical

OD323988/2025-2026:Supply, ,fabrication , conveyance and errection of 3.5 m long , post top lantern made with 50 mm dia 'B' class GI pipe in single section with a pedastal plate of size 100x 75 mm x4 mm thick M.S sheet with necessary holes for anchor bolts welded at the bottom end clamping the post with side bar using M.S clamps made with 32x6 mm flat and 8mm M.S. rod bent and weled to required shape and tightening using 6mm iron bolts ,nuts and washers ,including painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer etc. as required.

OD323987/2025-2026:Supply, ,fabrication , conveyance and errection of 3.25 m long , post top lantern made with 50 mm dia 'B' class GI pipe in single section with a pedastal plate of size 100x 75 mm x4 mm thick M.S sheet with necessary holes for anchor bolts welded at the bottom end clamping the post with side bar using M.S clamps made with 32x6 mm flat and 8mm M.S. rod bent and weled to required shape and tightening using 6mm iron bolts ,nuts and washers ,including painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer etc. as required.

OD323989/2025-2026:Supply, ,fabrication , conveyance and errection of 3.00 m long , post top lantern made with 50 mm dia 'B' class GI pipe in single section with a pedastal plate of size 100x 75 mm x4 mm thick M.S sheet with necessary holes for anchor bolts welded at the bottom end clamping the post with side bar using M.S clamps made with 32x6 mm flat and 8mm M.S. rod bent and weled to required shape and tightening using 6mm iron bolts ,nuts and washers ,including painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer etc. as required.

OD326672/2025-2026:Supply, fabrication and conveyance of 4.0 m long , 50mm dia 'B' class GI pipe in single section for post top lantern fittings with 2 nos , 150mm long 6 mm tore steel pieces welded at pedastal portion including painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer etc. as required. including digging up a pit of size of 30x30x40 mm and providing cement concrete C;C:1:2:4 ratio witha muffing about 25 cm height in lines and levels

OD326673/2025-2026:Supply, fabrication and conveyance of 3.75 m long , 50mm dia 'B' class GI pipe in single section for post top lantern fittings with 2 nos , 150mm long 6 mm tore steel pieces welded at pedastal portion including painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer etc. as required. including digging up apit of size of 30x30x40 mm and providing cement concrete C;C:1:2:4 ratio witha muffing about 25 cm height in lines and levels

OD326703/2025-2026:Supply, fabrication and conveyance of 3.50 m long , 50mm dia 'B' class GI pipe in single section for post top lantern fittings with 2 nos , 150mm long 6 mm tore steel pieces welded at pedastal portion including painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer etc. as required. including digging up apit of size of 30x30x40 mm and providing cement concrete C;C:1:2:4 ratio witha muffing about 25 cm height in lines and levels

OD326697/2025-2026:Charges for providing SMC box of hinged door type of size 140x140x90 mm at the bottom portion of lamp post and making all cable termination inside this box using suitable PVC connectors .

90.3.18.2:Supply, fabrication, conveyance and fixing the following sizes of B class GI pipe bent to shape / cut and welded to shape and fixing the same to wall / parapet using clamps as noted along with each size, painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer, making good the damages, colour washing etc as required.32 mm dia with HG company fabricated clamps

OD326707/2025-2026:Supply, conveyance, installation of 40w post top LED light (ZEUS) over G.I.post and making all connection for trouble free operation. Makes prefereed :- / Phlips/crompton/Havells/ Bajaj/Luker)

90.12.10.2:Supply & laying of DWC pipe in ordinary soil 0.75m below ground level including excavation50/38 mm or nearest size

90.12.7.2:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.2 core 6 sq mm with factory made clamp

90.6.5.4:Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.2 core 1.50 sq mm

5.4:Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

5.9:Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required.(Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

OD326680/2025-2026:Supply and providing 25 mm x5 mm G.I.strip of 20 cm long placed in face to face bent over the watering pipe and tighten with 4 sets of brass bolts ,nuts,washers after placing earth leads between them ( earth test bus)

90.16.1.2:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required2.65 mm copper conductor (12 SWG)

90.16.1.3:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG)

90.16.5.2:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.2.65 mm (12 SWG)

90.16.5.3:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG)

OD326684/2025-2026:Supply and providing the following sizes of bolt and nut with washers on the existing MS box/earth bus etc. as required including necessary holes as required. 25x3mm brass nut and bolt

OD326685/2025-2026:Supply and providing the following sizes of bolt and nut with washers on the existing MS box/earth bus etc. as required including necessary holes as required. 25x6mm brass nut and bolt

2.10.1:Supplying and fixing 5A to 32 A rating, 240/415 volts, 10 kA, ""C"" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole

2.12.1:Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

2.14.1:Supplying and fixing following rating, double pole, (single phase and neutral),240 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 milli amperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 25 amps

2.3.1:Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 6 way, Double door

OD326688/2025-2026:Fabrication, supply & installation of dust and vermin proof, wall mounting, Hot press moulded SMC Meter Boxbox of following sizes suitable for fixing KSEB meter, fuse units, CT etc, hinged door construction for the front side with compartments if necessary, providing vision panel for the meter compartment, knock out for cable entry and exit. GS-MB- 3750 (inside 350x481x210mm)

OD326691/2025-2026:Supply and fixing the following accessories in the existing meter board and giving connections etc. 32 A, 415 V, 2 way neutral link mounted on DMC/ SMC base.

OD326692/2025-2026:Supply and fixing the following accessories in the existing meter board and giving connections etc. 32 AHRC fuseBase with HRC fuse link

OD326700/2025-2026: Charges for Preparation of Test report to KSEB.