Electrification and Landscaping Works of various Parks at Ernakulam District

Amount

Electrical and Landscaping works

14.15.1 Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required.63 mm· dia (OD-63 mm & ID-51 mm nominal)

od283909/2021_2022 20M High mast LED ConversionProviding and fixing following IP-66 protected high power LED flood light system with pressure die cast aluminium housing with powder coating, 200 - 275-volt voltage with dimmable driver. PF > 0.9 5, should meet ANSI 2G vibration test, compliance to UL/CE with integrated dimmable driver. The driver shall be high efficiency having efficiency more than 85 % and in compliance with IEC standards. system life of 50,000 burning hours with 70 % lumens of initial lumens can be maintained. Overload and short circuit protection. Compliance to IS 10322/IEC 60598, LM 79 & LM 80. Adherence with RoHS. 200W LED Flood light Conversion for the existing high mast of 20M height. The cost is inclusive of removing the existing sodium vapour and installation of new LED lights with proper handing over of removed lights to KMC store.

od283915/2021_2022 12.5M/9M Mini Mast LED ConversionProviding and fixing following IP-66 protected high power LED flood light system with pressure die cast aluminium housing with powder coating, 200 - 275 volt voltage with dimmable driver. PF > 0.9 5, should meet ANSI 2G vibration test, compliance to UL/CE with integrated dimmable driver. The driver shall be high efficiency having efficiency more than 85 % and in compliance with IEC standards. system life of 50,000 burning hours with 70 % lumens of initial lumens can be maintained. Overload and short circuit protection. Compliance to IS 10322/IEC 60598, LM 79 & LM 80. Adherence with RoHS. 150W LED Flood light Conversion for the existing highmast of 20M height. The cost is inclusive of removing the existing sodium vapour and installation of new LED lights with proper handing over of removed lights to KMC store.

od283920/2021_2022 Supply and painting after applying high quality metallic epoxy primer and using epoxy paints of colour specification approved by Engineer in charge and approved brand (Asian/Burger/equilant) for mini high mast poles

od283926/2021_2022 Supply and Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size in the existing HDPI pipes - upto 2C x 16 sq.mm (Make – Finolex / Polycab/KEI/RR/RPG)

od283940/2021_2022 Supply, installation, testing & commissioning of timer control for high mast lamps

od283941/2021_2022 Supply and installation of cable marker made up of cast iron painted using standard colour and visible marking as "LT cable" at a visible distance as per site requirement.

od283942/2021_2022 Supply and laying of power supply trailing cable of EPR (Ethylene Propylene Rubber): insulated 5core x 4sqmm copper round cable, providing and fixing of junction box in the Lantern carraiage, connectors,with necessary inter connection etc., (Make – Finolex / Polycab /KEI /RR /RPG). This cable is for changing highmast cable if ithe existimg old cables are not in good condition.

od283933/2021_2022 TERMINATION OF CABLESSupply of all materials and termination of Armoured Aluminium / Cu, Cables ( A2XFY / 2XFY) by using single compression type cadmium plated brass cable glands, crimping lugs. 2C x 16 sq. mm

od283943/2021_2022 Supply, installation, testing & commissioning of group timer control for mini high mast lamps

od283945/2021_2022 Supply, Installation, Testing and ComissioningNickel coated Copper bonded electrode made from low carbon steel. Earth rods and molecularly bonded with 99.9 % pure electrolytic copper with 250 micron coating, 17.2 mm dia with pressed contact including stainless steel nut, bolts and washers.Copper bonded rod of size (17.2mmx2000mm) with 1 nos chemical bag of 25 kg. with all accessories. Approximate weight of copper electrode is 5.62 kg. The earth rod should be properly covered with UV resistant earth pit Chamber of top 300mm, bottom 400mm and height 280mm complied to IEC62561- 5:2017

od283949/2021_2022 Supplying and laying 6 SWG GI wire at 0.5 meter below the ground level for conductor earth electrode, including connection, termination with GI thimble etc. as required.

od283950/2021_2022 Boring of earth pit ( 0-15m ) suitable for the earthing to be done as per the dimension of earth rod and it should be capable of holding 25kg electrafill compound.

od283951/2021_2022 Tinned earth bench /strip of 25X3 mm size with threaded screw ports with stainless steal screws and washers with 6 holes. And also the earthing system should be covered with proper earth chamber. The rate is inclusive of material and cost of labour.

od283957/2021_2022 Supplying and making end termination with light of 3x1.5sqmm copper wire using proper lugs, ferrules etc on both ends of the cable.

od283958/2021_2022 Supplying and making end termination with copper lugs for following size of PVC insulated and PVC sheathed/XLPE aluminium conductor cable of 1.1KV grade as required for input and output of the cable 4 X 4 Sq.mm in flush terminal box of pole.

od283959/2021_2022 Supplying and laying of 4 x 4 sqmm sizes of PVC armoured multistranded Copper conductor , XLPE insulated, cores laid up inner sheathed for multicore cables FRLS cable / armoured, extruded PVC type sheathed , 650/1100 volt grade as per IS 7098 ( part 1) 1988. (Make – Finolex / Polycab/KEI/RR/RPG)

od283962/2021_2022 Supply, installation, connecting using sufficient cable from existing supply point, testing & commissioning of flood light focus to Gandhi Statue

od283952/2021_2022 "Architectural pole SUPPLY OF 3M-4M HEIGHT NERI ARCHITECTURAL POST TOP POLE ALONG WITH ORNOMENTAL CAST IRON COMPONENTS - 3M height Pole made of complete cast iron decorative components where the internal fabricated pole of 3M is Made in combination of mild steel pipe sections 89mm dia.,48mm dia. & covered on the outside by decorative cast iron base and columns. Decorative Cast iron Base design with the company/brand logo engraved in the cast iron mould, starting with dia 260mm for 130mm height, followed by a ring of 260mm dia gradually tapering to a flat round surface of dia 170mm for 366mm height again followed by a ring dia 210mm and gradual tapering upto a dia 92mm as approved by the econerned Engineer the total height of decorative cast iron base is 700mm and weight-32kgs. Decorative cast iron base should be provided with a flush door of length 228mm, width 124mm and height 30mm. Decorative cast iron flower starting with a dia 102 mm increasing gradually to 160mm and then tapering to a dia 99mm.Total height of cast iron flower is 304 mm & weight is 6.3kgs.. Decorative cast iron column(2nos.) is of 80mm dia. and having continuous grooves along the height. The height of each pillar is 750mm & weight of each pillar is 9.5kgs. Decorative Cast iron top starting with dia 80mm and a ring of dia 96mm at height of 160mm then gradually increasing to dia 120mm the top half of the decorative top should have grooves along the length, total height of cast iron top is 334mm - weight - 5.2kg. All cast iron parts weight mentioned are with +/5% tolerance.Entire pole shall be made to provide pleasing aesthetics as approved by Concerned Engineer in-charge. After Fabrication, Entire Pole is hot dip galvanized(60 microns Minimum ) for the effective corrosion resistance . The hot dip Galvanised pole should be provided with an inbuilt junction box to fix 32A connectors and 6A MCB, at the bottom - the inbuilt box should have a flush door of suitable size. The decorative pedastal to be mounted on a suitable size steel plate. This mounting steel plate along with foundation bolts of suitable size to be used for ensuring firm grouting into the specially designed RCC foundation. wind pressure calculation as per IS 875(part-3) & structural calculation report as per EN40 should be submitted to verify the pole design. Pole & it's parts are painteOd itnh3elaryeEr cnogatiinnge(ceoartiinnggthiOcknregssa-1n0i0smaitciroonns msinimum) in which 1st layer with etch primer, 2nd layer with epoxy primer & 3rd final layer with PU paint .

od283953/2021_2022 Top LanternSUPPLY AND INSTALLATION OF ARCHITECTURAL LED LIGHT FIXTURE MODEL (30W-40W) Power Module LED, 3000K, IP-66, Upper frame in single piece made of die cast aluminium using pressure die-casting process. Bottom frame with Company /brand name engraved in the mold composed by a ring made of die cast aluminium using pressure die-casting process in single piece & two arms made in hot dip galvanized steel, with flange for fixing equipped of a hole (diam. 28 mm) is provided ath bottom. Auxiliary and optical compartment can be accessed by opening the top frame. Dro p shaped screen in polymethylmethacrylate (PMMA), transparent. Shock resistance IK06. Finish-Pure polyester powder coating in Standard Grey Colour. Optical compartment IP Rating - IP 66. Height – 690mm, Diameter - 550mm, Weight - 11.5Kgs., Area Exposed to Wind(S) - 0.141m2 Power LED Module with Company /brand name printed on PCB with the metal core plate, in compliance with IEC 62031 (Supporting Test Report from UL Authorised Laboratory should be submitted). LED Chips of CREE/ NICHIA/ OSRAM/ SEOUL/ LUMILEDS make with Individual LED's Minimum Luminous Flux (lm) - 148lm/w shall be used- same should be supported by LED manufacturer's tech sheet. Colour Rendering Index: Ra > 70. Electronic Power Supply for LED Module, which offers Protection against Short Circuit, Over- Voltage & Over- Current, with in-built surge protection up to 4kv (an additional surge protection device of 10kV also provided in-built the fixture). Modular (2 X 2) refractive lens in PMMA with Type- II/III/IV photometric distribution options. protection screen in extra-clear tempered glass with impact resistance IK 08. LED Lifetime @L70 >1,00,000 hours @Ts 85°C. LM 80 report & TM 21 calculation should be submitted to support the same. The Light fixture shall be in compliance with IEC 60598-2-3; IEC 60598-1(Supporting Test Report from UL Authorised Laboratory should be submitted). LM79 report also should be submitted from UL Authorised Laboratory. Sample should be submitted for approval from concerned engineer-in charge.

3.5.3 Excavation in Soil using Hydraulic Excavator and Tippers with disposal upto 1000 m Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross-sections, and transporting to the embankment location with a lift upto 1.5 m and lead upto 1000 m as per Technical Specification Clause 302.3

2.23 Removal of Telephone/Electric Poles and Lines Removal of telephone/electric poles with wires including excavation and dismantling of foundation concrete and lines under the supervision of concerned department, disposal with all lifts and upto a lead of 1000 m and stacking the serviceable and unserviceable material separately as per Technical Specification Clause 202.3

4.1.A.1 Granular Sub-base with Well Graded Material (Table 400.1) (A) By Mix in Place Method Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. (i) For Grading I Material

4.12 Construction of Water Bound Macadam using locally available material (Table 400.13) Providing, laying spreading and compacting local material in block or large discrete particles, such as kankar, Laterite, Dhandla etc. as per Table 400.13 to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming requisite type of screening /binding materials to fill-up the interstices of laid material watering and compacting to the required density as per Clause 405.3 and Technical Specification Cluase 408.

12.8.A.1 Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. PCC Grade M15

12.8.B Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications PCC Grade M20 (Without formwork)

3.1 Excavation for roadway in soil using manual means including loading in truck for carrying of cut earth to embankment site with all lifts and lead upto1000 metres.

8.4.8 Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign with 7years warranty manufactured as per IRC :67 made of Type IV micro prismatic grade sheeting fixed over aluminium sheeting, 2 mm thick/ aluminium composit material sheeting 4 mm thick with suitable back supporting frame of MS angle 25x25x3 and supported on GI pipe pole 50mm NB confirming to IS 1239 firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete min size 45 cm x 45 cm x 60 cm, 60 cm below ground level including painting all exposed surface with 2 coats of epoxy painting over epoxy primer and as per approved drawing and clause 801 including lettering symbols etc. 75 cm octagon

od282970/2021_2022 - A Supplying and fixing and painting of ferro cement( casted with 6mm steel reinforcement) planter boxes filled with soil mixed with manure, sludges, etc and planting of shurbs and flowering plants. With pot sizes: 62cm x56cm x34 cm

od282970/2021_2022- B Supplying and fixing and painting of ferro cement( casted with 6mm steel reinforcement) planter boxes filled with soil mixed with manure, sludges, etc and planting of shurbs and flowering plants. With pot sizes : 75cm x 50cm x 34cm

od282970/2021_2022- C Supplying and fixing and painting of ferro cement( casted with 6mm steel reinforcement) planter boxes filled with soil mixed with manure, sludges, etc and planting of shurbs and flowering plants. With pot sizes :80cm x 81cm x 51cm

od282971/2021_2022 Cutting branches of trees overhanging above any structures of girth between 40cm to 60cm including stacking of serviceable materials and disposal of unserviceable material, cost of labour, hire charges of rope and pully etc without making any damages to nearby structures etc complete.

od282972/2021_2022 Planting permanent hedges including digging of trenches, 60 cm wide and 45 cm deep, refilling the excavated earth mixed with farmyard manure, supplied at the rate of 4.65 Cum per 100 Metres and supplying and planting hedge plants at 30 cm apart.- Rhoeo Plant and Ornamental Peanut

od282973/2021_2022 Planting permanent hedges including digging of trenches, 60 cm wide and 45 cm deep, refilling the excavated earth mixed with farmyard manure, supplied at the rate of 4.65 Cum per 100 Metres and supplying and planting hedge plants at 30 cm apart. - Wantering Jew Plants

od282974/2021_2022 Planting permanent hedges including digging of trenches, 60 cm wide and 45 cm deep, refilling the excavated earth mixed with farmyard manure, supplied at the rate of 4.65 Cum per 100 Metres and supplying and planting hedge plants at 30 cm apart.Maintenance of hedge for one year - Lorapetalum Plants (Red)

od282975/2021_2022 Grassing with 'Pearl' grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn free from weeds and fit for moving including supplying good earth if needed In rows 7.5 cm apart in either direction

11.1 Spreading of sludge farm yard manure or/ and good earth in required thickness (cost of sludge, farm yard manure or/and good earth to be paid for separately)

Maintenance of plants, pearl grass, lawns with fine grassing of all kinds, landscape, pavements, etc including cleaning for minimum of three years as per Contract

Namaste Innovations