Tezpur Water Supply Scheme Phase II

Amount

SURVEY, DESIGN & AS-BUILT DRAWING: Conducting route survey under this scope and in consonance of the approved scope relevant ongoing projects (if any) on command area map along the road, fixing up alignment, taking levels at every 50 m intervals , and at each crossing & junction of road, change of alignment by qualified surveyors and with modern equipment viz. GPS, Total Station / DGPS and preparation of drawing in Auto CAD and GIS format as per instruction of Engineer - in - Charge showing the alignment of road, route of pipeline, location of Head Works & other intake sites, important land marks in both side of the roads, habitation by hatch mark and submission of 3 (Three) copies of drawing (Hard Copy) as well as soft copy in (CD or DVD) with geo reference of all landmarks, important road crossings, head Works, Design of the complete project, As built drawing & other related sites of proposed areas as directed. Survey Work also Includes Household survey for finalizing house survey connections- Entire water supply scheme Hydraulic desiginging and modelling of proposed water supply main lines, distribution system, and structural design of components (if any) included in proposed water supply system completely in all respect. Any changes as required after re-designing (if needed) the system shall be informed to the Engineer-in-Charge and after approval shall be executed entire project area as directed.

Schedule-I : Intake Barge

Design supply erection, testing and commissioning of Metallic pontoon of Size 9 x 6 m with suction piping size 350 mm dia, Header pipe 300 mm dia, length - 5 mtr approx. 2 inlet -250 mm Dia 2 outlet -300 mm Dia along with both side MS flanges, hardware and gasket. Anchoring and mooring as per Marine Statutory Rules and approvals, necessary bollards, RCC anchors with suitable weight and size, Marine chain with suitable size diameter and length etc. SS Flexible pipe 300 DN Size - 300 mm dia., MOC - SS, length - 6 mtr Single braided with both side Flanges 1 Runs x 2 Qty. HDPE Pipe, Size-300 DN, MOC - HDPE welded with 2 stud ends and 2 MS slip flanges inserted, UV stabilized raw material. Length - 6 mtr 1 Run x 5 Nos. Pipe Floater 300 DN pipe size-300 mm Shell-High impact polyethlene PU foam filled UV stabilized raw material Bolts, Nuts, Rubber Pads & Belts. Color: Orange 1 run 14 Qty including transportation of materials from factory to site along with the installation services and any other works as directed by Engineer/ Authority.

Supply, Installation and commissioning of GPRS/GSM enabled PLC panel as per detail specification , scope of work, approved drawing and instruction of EIC.PLC, Data Communication, Mod bus , Smart meter, adequate input & output with GSM/GPRS Comm modem, Supply, Laying of Shielded instrument cable with PVC conduit protection for underground work as per IS specification, Laying of cable on cable tray with glanding, labeling, tagging, with suitable lugs as per approved drawing and instruction of Engineer in charge, 1 Pair x 1mm Sq. Multistrand Halogen free PVC insulated , overall PVC sheathe Cable Insulation: 500V. Supply, Laying of power cable with Brick protection for underground work as per IS specification, Laying of cable on cable tray with glanding, labeling, tagging, with suitable lugs as per approved drawing and instruction of Engineer in-charge. 1100V Grade XLPE Insulated unarmoured cable 4C x 2.5mm Sq., Type: Multistrand Copper, Supply & laying GI perforated type cable trays with returned edge / flange, fabricated from 2.0 mm thk sheet steel in the standard length of 2.5 mtrs, duly hot dipped galvanized after fabrication as per IS 2629-1989 / IS 4759-1984 including accessories such as coupler plates/fish plates, bends, tees, reducers, elbows, covers and electro-galvanized hardware etc, erected on existing support as per specification and instruction of Engineer-in-charge. Designing, Supplying, Installing, commissioning & testing with Terminating & Interfacing of CAT 6 as per ISO/IEC-11801 std.cable for networking on wall in GI tray or on ground etc. Addition of other components like Lightning arrestor, Copper plate type earthing for PLC Panel and instruments

Schedule III : Raw Water Transmission main

DI - K9 Pipes for Raw water Pipes and Specials: - Design, supply, laying, hydro-testing, S&S Centrifugally Cast Ductile Iron double chamber Class K-9 pressure pipes conforming to IS : 8329:2000 with restrained joints (bolt less), all complete. Provision of DI Specials of class K-12 for push-on Jointing. Providing and laying Class K-12 Ductile Iron double chamber restrained joint (bolt less) specials such as tees, bends, collars, tapers and caps etc. conforming to IS : 9523 including testing of joints all complete. Providing and laying D.I. Specials of Class K - 12 suitable for mechanical jointing as per IS : 9523. Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and the cost of rubber gasket. Supply of C. I. Mechanical Compression Collar Coupling suitable for C.I. Spun Pipes(as per-IS-1536/2001)and complete with sealing rubber gasket of SBR,.C.I. follower Glands and M.S. nut Bolts. The whole assembly should be mechanically and hydraulically tested to the provisions as laid down in IS:1538/1993. Design, Supply & installation CI D/F sluice/ Washout/ Air valves and others with cap/wheel as per IS 14846/2000 PN 1.0 with ISI marking. Labour charge for carrying, placing in position, fitting and fixing C.I. sluice valve (with wheel & cap) C.I. reflex valve complete with supplying bolts and nuts, 3 mm thick rubber insertion sheet etc. (the tail pieces if required will be paid separately) all complete as directed (one valve and two flanged joints). Lowering, laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete including required excavation work for pipes, cables, sockets. FIlling of excavated earthwork for Trenches foundations, plinths and disposing off the surplus excavated earthwork material removed from the site and valve chamber with precast steel fibre reinforced concrete frame and covers (S.F.R.C. frame and covers)Providing and constructing B.B. masonry valve chamber with 15 cm thick 1:3:6 proportion PCC bedding, excluding excavation, B.B.masonry in CM1:5 proportion precast S.F.R.C. frame and cover, close timbering in trenches including strutting, shoring and packing cavities, Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana I Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate I retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge, for the following grades of concrete, centering and shuttering including strutting, propping etc for formwork removal, Steel reinforcement for RCC work, road restoration wherever required etc. and other works in complete as directed by Engineer-in-charge.

400 mm dia Ductile Iron Class K-9 pipe (inclusive of all fittings and other relevant accessories)

Schedule IV : Proposed Water Treatment Plant (8.80 MLD)

A) Civil works for Proposed WTP: Design, supply, construction, installation, testing and commissioning of Complete Water Treatment Plant of capacity 8.80 MLD (in 22 hours of operation and with raw water from source) with suitable design in conformity with the CPHEEO Manual and all relevant BIS Code of practices with latest amendment, current at the time of design & execution, having provision for Aeration, Flash Mixer & Flash Mixer Channel, including all necessary Mechanical Work suitable for smooth & trouble free operation of the plant Clariflocculator, Sludge Sump, Filter & Chemical House, Pure Water SUmp, Centrufuge Building, Recycling Sump, Elevated Channel, Tonner Room, WTP MCC Room & Transformer Platform, Security Cabim, STaff Quarter for WTP, Internal roads for proposed WTP, WTP Electromechanical equipments along with internal drain pipeand other pipe (HDPE 6 kG and DI-K7/K9 and compound wall with all necessary electrical fittings & fixtures viz., light / fan / power socket etc., all complete, as directed and specified and any other works as directed by Engineer in charge/ employer.

B) MECHANICAL WORKS FOR NEW PROPOSED WTP:- Design, supply, erection, testing and commissioning of Proposed Centrifugal Pump 75 HP, 112 LPS, 24 Mtr Head, ( 2 Nos) including all necessary electrical and other installation works (Pump and Motor MOC and other parameters comply to Technical Specification) , Induction Motor, Electric Valve actuator, Reflux Valve, Kinetic Air Valve,MS Structural Steel Work for necessary support for Panel Board, Sluice Valve, Delivery line and necessary lifting arrangements. MSDF pipes and specials, MSDF dismantling joint, flanged joints with M.S Flanges and CC Foundation, with other important accessories like Pressure Gauge. Hand Operated Travelling Crane of 5 MT capacity with completec chain Pulley and ISI mark as pe the detailed specification of 8 mtr span along with Square Bar and DSL. All the Mechanical works Should Comply the Technical Specification and any other works as directed by Engineer in charge/ employer.

Supply, Laying of Shielded instrument cable with PVC conduit protection for underground work as per IS specification, Laying of cable on cable tray with glanding, labeling, tagging, with suitable lugs as per approved drawing and instruction of Engineer in charge, 1 Pair x 1mm Sq. Multistrand Halogen free PVC insulated , overall PVC sheathe Cable Insulation: 500V. Supply, Laying of power cable with Brick protection for underground work as per IS specification, Laying of cable on cable tray with glanding, labeling, tagging, with suitable lugs as per approved drawing and instruction of Engineer in-charge. 1100V Grade XLPE Insulated unarmoured cable 4C x 2.5mm Sq., Type: Multistrand Copper, Supply & laying GI perforated type cable trays with returned edge / flange, fabricated from 2.0 mm thk sheet steel in the standard length of 2.5 mtrs, duly hot dipped galvanized after fabrication as per IS 2629-1989 / IS 4759-1984 including accessories such as coupler plates/fish plates, bends, tees, reducers, elbows, covers and electro-galvanized hardware etc, erected on existing support as per specification and instruction of Engineer-in-charge. Designing, Supplying, Installing, commissioning & testing with Terminating & Interfacing of CAT 6 as per ISO/IEC-11801 std.cable for networking on wall in GI tray or on ground etc. Addition of other components like Lightning arrestor, Copper plate type earthing for PLC Panel and instruments, SCADA room wih required furnitures sitting arrangement, internet connectivity, split AC etc in all complete as directed by Engineer/ Auhtority. All Consumable cost for items such as Alum, Chlorine and Lime etc., Establishment Cost & other Miscellaneous expenditures for the period of 5 years.

Schedule VI : Clear Water Transmission main :

DI - K9 & DI - K7 Pipes for Clear water Pipes and Specials: Design, supply, laying, hydro-testing, S&S Centrifugally Cast Ductile Iron double chamber Class K-9 pressure pipes conforming to IS : 8329:2000 with restrained joints (bolt less), all complete. Provision of DI Specials of class K-12 for push-on Jointing. Providing and laying Class K-12 Ductile Iron double chamber restrained joint (bolt less) specials such as tees, bends, collars, tapers and caps etc. conforming to IS : 9523 including testing of joints all complete. Providing and laying D.I. Specials of Class K - 12 suitable for mechanical jointing as per IS : 9523. Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and the cost of rubber gasket. Supply of C. I. Mechanical Compression Collar Coupling suitable for C.I. Spun Pipes(as per-IS-1536/2001)and complete with sealing rubber gasket of SBR,.C.I. follower Glands and M.S. nut Bolts. The whole assembly should be mechanically and hydraulically tested to the provisions as laid down in IS:1538/1993. Design, Supply & installation CI D/F sluice/ Washout/ Air valves and others with cap/wheel as per IS 14846/2000 PN 1.0 with ISI marking. Labour charge for carrying, placing in position, fitting and fixing C.I. sluice valve (with wheel & cap) C.I. reflex valve complete with supplying bolts and nuts, 3 mm thick rubber insertion sheet etc. (the tail pieces if required will be paid separately) all complete as directed (one valve and two flanged joints). Lowering, laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete including required excavation work for pipes, cables, sockets. FIlling of excavated earthwork for Trenches foundations, plinths and disposing off the surplus excavated earthwork material removed from the site and valve chamber with precast steel fibre reinforced concrete frame and covers (S.F.R.C. frame and covers)Providing and constructing B.B. masonry valve chamber with 15 cm thick 1:3:6 proportion PCC bedding, excluding excavation, B.B.masonry in CM1:5 proportion precast S.F.R.C. frame and cover, close timbering in trenches including strutting, shoring and packing cavities, Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana I Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate I retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge, for the following grades of concrete, centering and shuttering including strutting, propping etc for formwork removal, Steel reinforcement for RCC work, road restoration wherever required etc. and other works in complete as directed by Engineer-in-charge.

300 mm to 450mm dia Ductile Iron Class K-9 & K-7 pipe (inclusive of all fittings and other relevant accessories)

Schedule VII : Elevated Service Reservoirs

Elevated Service Reservoir :-Design, construction, supply, erection, testing and commissioning of 3(Three) Zonal Over head service reservoirs of Circular/Rectangular shape, RCC framed staging of capacities 10.34 LL MBR 10.5 m staging at WTP Campus, 11.60 LL @ 22 m staging for Zone-2 and 18.60 LL @ 22 m staging for Zone-4 at locations under the command areas to be served. RCC Reservoir having adequate foundation including excavation along with the lift and lead, Providing and Laying Cement concrete adn ready mix design mix concrete for the works up to the plinth level and M-30 Grade concrete for all the works above the plinth level. Steel for reinforcement works. Filling the ecxavated earthwork in trenches, plinths and sides of foundation and disposing off the excavated surplus earthwork Centring and shuttering including strutting and propping for foundations, footings base of columns, column, pillers, piers, abutments, lintels, plinth beam, girders, cantilevers, suspended floors, roofs, landings, balconies etc. Cement plaster for internal plastering, Finishing of walls with Premium Acrylic smooth exterior paint with silicon additives. SUpply and transportation of S.P fire hydrants, lightning arrestor with earthing system, providing CC topping on bottom dome & conical dome inside the reservoir & CC Skirting on inner faces of reservoir wall, providing cement mortar plaster to all other exposed surfaces of the structure and painting of the RCC structure with weather resistant cement paint over priming coat & anti corrosive paint over a coat of lead primer to M.S. work. Provision of sluice valves for various purposes like Inlet, Outlet, Bypass, fire Hydrant, Washout of required sizes including cost of labour charge for carrying, placing in position, fitting and fixing of the valves all complete, as directed and specified including construction of operator room in the premises and any other works as directed by Engineer in charge/ employer. For Pro.ESR-1 & Pro.ESR-2, Separate Scada Room 2 No-Size-3.5mx3.5mx3m

SCADA for Elevated Service Reservoir (MBR-11.34 LL, ESR-1 11.60 LL and ESR-2 18.60 LL):- Supply, Installation, testing and commissioning of PLC Based RTU Panel, Ultrasonic/Radar/Hydro static level Transmitter including all accessories & Fittings etc. including Mounting structure, painting , tagging, cabling and termination up to PLC Panel, complete as per approved drawing, scope of work, detail technical specification and engineering supervision. Design, Supply, Installation, Testing and Commissioning of Sealed Diaphragm Type Pressure Transmitter. Piezo-resistive sensor technolgy based pressure transmitter with Micro-processor based integral LED/ LCD display, with accuracy of ± 0.3% of span, external zero and span adjustment, self diagnostics, temperature sensor for compensation. 15 to 36 V DC power supply, output signal of 4-20 mA DC with HART. Minimum IP 65 degree of protection. Supply, Laying of power cable with Brick protection for underground work as per IS specification, Laying of cable on cable tray with glanding, labeling, tagging, with suitable lugs. Full bore electromagnetic flow meter of 300 mm, 450 mm & 350 mm at inlet with similar double solonoid altitude control valve, as per approved drawing and instruction of Engineer in-charge.

Schedule VIII : Distribution Network

A) DI - K7 Pipes for Distribution network:- Design, supply, laying, hydro-testing, S&S Centrifugally Cast Ductile Iron double chamber Class K-9 pressure pipes conforming to IS : 8329:2000 with restrained joints (bolt less), all complete. Provision of DI Specials of class K-12 for push-on Jointing. Providing and laying Class K-12 Ductile Iron double chamber restrained joint (bolt less) specials such as tees, bends, collars, tapers and caps etc. conforming to IS : 9523 including testing of joints all complete. Providing and laying D.I. Specials of Class K - 12 suitable for mechanical jointing as per IS : 9523. Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and the cost of rubber gasket. Supply of C. I. Mechanical Compression Collar Coupling suitable for C.I. Spun Pipes(as per-IS-1536/2001)and complete with sealing rubber gasket of SBR,.C.I. follower Glands and M.S. nut Bolts. The whole assembly should be mechanically and hydraulically tested to the provisions as laid down in IS:1538/1993. Design, Supply & installation CI D/F sluice/ Washout/ Air valves and others with cap/wheel as per IS 14846/2000 PN 1.0 with ISI marking. Labour charge for carrying, placing in position, fitting and fixing C.I. sluice valve (with wheel & cap) C.I. reflex valve complete with supplying bolts and nuts, 3 mm thick rubber insertion sheet etc. (the tail pieces if required will be paid separately) all complete as directed (one valve and two flanged joints). Lowering, laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete including required excavation work for pipes, cables, sockets. FIlling of excavated earthwork for Trenches foundations, plinths and disposing off the surplus excavated earthwork material removed from the site and valve chamber with precast steel fibre reinforced concrete frame and covers (S.F.R.C. frame and covers)Providing and constructing B.B. masonry valve chamber with 15 cm thick 1:3:6 proportion PCC bedding, excluding excavation, B.B.masonry in CM1:5 proportion precast S.F.R.C. frame and cover, close timbering in trenches including strutting, shoring and packing cavities, Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana I Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate I retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge, for the following grades of concrete, centering and shuttering including strutting, propping etc for formwork removal, Steel reinforcement for RCC work, road restoration wherever required etc. and other works in complete as directed by Engineer-in-charge.

300 mm to 400 mm dia DI K-7 (inclusive of all fittings and other relevant accessories)

B) HDPE Pipes for Distribution System confirming to IS 4984 / 14151 / 12786 / 13488:- confirming to IS 4984 / 14151 / 12786 / 13488:- Providing and supplying in standard lengths Polyethelene Pipes, confirming to IS 4984 / 14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i. e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by GI & GOM in all respect etc.complete. Hydraulic testing of HDPE (PE 80 PN-8) pipe including all pipe, specials, fittings and all relevant accessories (using electrofusion) confirming to IS 4984 and the specifications, including third party inspection (Pre and Post), all taxes and duties, transportation, freight charges, loading and unloading, construction of Thrust Block where necessary, conveyance to the project site and stacking with cost of all labour and material for following pipe diameters. including all labour, material, equipment all work complete as per specification and as directed by the Engineer In Charge with all lead and lift-including earth work, back filling &thrust blocks, nalla/Stream/ culvert crossing, construction of pedestals including all up to commissioning, Third party inspection (Pre & Post), Road restoration including providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:1.5:3 (1 Cement: 1.5 coarse sand (zone-Ill) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) Providing and laying 60 mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with line sand etc. Including supplying and stacking of aggregate at site for WBM Road, and other various activities for WBM Road such as Preparation and consolidation of subgrade with power roller of 8 to 12 tonne capacity, laying, spreading and compacting of stone aggregates with specified size to WBM specifications, Supply & installation CI D/F sluice/ Washout/ Air valves and others with cap/wheel as per IS 14846/2000 PN 1.0 with ISI marking. Labour charge for carrying, placing in position, fitting and fixing C.I. sluice valve (with wheel & cap) C.I. reflex valve complete with supplying bolts and nuts, 3 mm thick rubber insertion sheet etc. (the tail pieces if required will be paid separately) all complete as directed (one valve and two flanged joints). Lowering, laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete including required excavation work for pipes, cables, sockets. FIlling of excavated earthwork for Trenches foundations, plinths and disposing off the surplus excavated earthwork material removed from the site and valve chamber with precast steel fibre reinforced concrete frame and covers (S.F.R.C. frame and covers)Providing and constructing B.B. masonry valve chamber with 15 cm thick 1:3:6 proportion PCC bedding,excluding excavation,B.B.masonry in CM1:5 proportion precast S.F.R.C. frame and cover, close timbering in trenches including strutting, shoring and packing cavities, Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana I Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 all complete as per the direction of Engineer-in-charge.

HDPE PE 80, PN 8, 110 mm to 280 mm dia (inclusive of all fittings and other relevant accessories)

Schedule IX : House Service Connections and Meter Installation

A) House Service Connection: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)/ PPR pipes, having thermal stability for hot & cold water supply including all CPVC/PPR plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. Providing and supply of water meter, meter box and other components. Labour work for fixing of water meter (Water meter supplyed by SMC free of cost). Providing, Supplying and Fixing of Strap Saddle. Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main. Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete, road restoration as per exisiting condition, commiissoning in complete as directed.

For 20-25 mm Service Connection

Schedule-X : HT Connection and Transformer Charges and any other works as directed by Engineer/ Authority

Operation & Maintenance: The commissioning, running, and maintaining of the scheme for five years encompasses expenses related to consumables, establishment, operation, and maintenance repairs. Essential consumables such as alum, chlorine, and lime are vital for water treatment processes, ensuring the distribution of safe and clean water. Establishment costs include various operational needs, such as staff salaries, employment of operators and valve men, and other administrative and logistical expenses required for the seamless operation of the water supply infrastructure. Regular inspections, servicing of mechanical components, and replacing worn-out parts are necessary to prevent system failures and ensure continuous operation. This involves routine maintenance activities like cleaning and repairing pipelines, pumps, and valves, as well as addressing unforeseen damages. Effective repairs and maintenance are crucial to minimize downtime, reduce the risk of major breakdowns, and extend the lifespan of the water supply infrastructure and any other works. Upon completion of the five-year period, the scheme will be handed over to the Local Body/Municipal Board and any other works as directed by the Engineer-in-charge. (EXCLUDING ELECTRICAL CHARGES)

1st Year

2nd Year

3rd Year

4th Year

5th Year

Sanjib Bhattacharjee (BID ID -265661)

Shivam transcon Pvt.Ltd (BID ID -265895)