ESTABLISHMENT OF INSTRUMENTATION AND PERFUMERY LABORATORY WITH ELECTRICAL EQUIPMENT AND UPGRADING OF NETWORKING SYSTEM AT CAP SELAQUI DEHRADUN

Amount

SUB HEAD - I SCHEDULED ITEMS

WIRING

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Group C

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 6 sq. mm + 1 X 6 sq. mm earth wire

4 X 4 sq. mm + 2 X 4 sq. mm earth wire

4 X 10 sq. mm + 2 X 6 sq. mm earth wire

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

5/6 amps switch

3 pin 5/6 amp socket outlet

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.

Supplying and fixing brass batten/ angle holder including connection etc. as required.

BOARD & DB'S

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

6 way (4 + 18), Double door

8 way (4 + 24), Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing 20 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 20 A "C" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.

Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.

Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts& nuts, painting suspenders etc as required.

150 mm width X 50 mm depth X 1.6 mm thickness

4.2 Supplying and installing following size of perforated painted with powder coating M.S. cable trays bends with perforation not more than 17.5%,, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.

150 mm width X 50 mm depth X 1.6 mm thickness

EARTHING

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

Supplying, installing, testing and commissioning of following capacity TPN tap off box made of 1.6mm thick sheet steel enclosure duly painted with powder coating on existing rising mains complete with TPN disconnector FSU and HRC fuses, connections, earthing etc. as required.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.

Above 185 sq. mm and upto 400 sq. mm

Supplying,installation,testing and commissioning of Microwave technology based occupancy sensor having high preformance, non regulating programmable type, suitable for connected load upto 10Amp , for mounting height up to 2.6 mtr and for 5m X 20m coverage area along with necessary fixing arrangements i/c programming at site etc. complete as required.

4Way RMU Unit

11kV, 630A, 21kA/3sec, SF6 Gas Insulated, Outdoor, Extensible Type Compact Switchgear with 1 No. Motor Operated Vacuum Circuit Breakers as Incomer, 3 Nos. Motor Operated Vacuum Circuit Breaker as Outgoing, 1 Nos. Air Insulated Metering Module (Configuration: VVVV+M) SafePlus compact switchgear Total number of modules 4 pcs.

HT Cable

Supply, Laying, Testing & Commissioning of 11kV grade XLPE insulated Aluminium conductor, Steel armoured, PVC sheathed, cable in masonry trenches / buried underground with sand, brick & all supports, brackets, clamps etc. as required.

11KV 3C x 240Sqmm Indoor End Termination of Cables using RAYCHEM / Reputed Equivalent - HEAT SHRINKABLE KITS

11 KV 3C - 150 Sq.mm XLPE - Earthed type - 1R of From RMU Unit to Transformer-1 & 2

11KV 3C x 150 Sqmm Indoor End Termination of Cables using RAYCHEM / Reputed Equivalent - HEAT SHRINKABLE KITS

Excavation & refilling of cable trench in all types of soils, like hard gravel soil, BC soil, Red soil etc. The cost includes supply & spreadding of sand cushioning and covering with shabad stone complete as per department norms

Supply and Laying of 150 mm Dia Hume pipe at road crosing (with Road Cutting) NP 3 CLASS

Commission Cable's & Termination

PVC insulated, steel armoured, Copper Conductor Cables(YFY) (between Transformer OLTC & Marshall Box and Transformer to HT Panel

12C x 1.5 sq.mm Cu Ar Cable

4C x 2.5 sq.mm Cu Ar Cable

12C x 1.5 sq.mm Cu Ar Cable Termination

4C x 2.5 sq.mm Cu Ar Cable Termination

Supply & Errection of 12 Way SPN DB. (Incomer-40A 2P MCB-1Nos, Outgoings-20A SP MCB-10Nos

4C x 6 sq.mm Cu Ar Cable for DB Incoming

4C x 6 sq.mm Cu Ar Cable Termination

LV Panel and AHU Control Panels with building management system (B.M.S)

Supply, Installation, Testing and Commissioning of 3phase and Neutral 415V, 4 wire Free Standing, Floor mounted LV panel made out of 2mm thick CRCA sheet after seven tank process and Epoxy powder coating. The panel shall consist of suitable rating TPN Copper bus bar (at the rating of 1.8A per Sq.mm) supported with DMC/ SMC barriers and colour coded with Heat shrinkable sleeves. The Metering shall be provided as specified. The panel shall have Short circuit with standing capacity and consist of the switch gear as mentioned. The panel shall be got fabricated from manufacturers with CPRI Test certificate only. The Panels shall be mounted on ISMC-75. All Switchgear Ratings of Incoming and Outgoing feeders shall be as per specification and Approved Drawing. Any civil works related mounting shall be under client scope. Microprocessor based relay and sensor required for building management system.

LT panel with 1250 amp incommer and 10 nos. 400 amp outgoing MCCB.

AHU control panel with VFD with 100 amp incommer and 6 nos. 32 amp outgoing MCCB.

AHU control panel without VFD with 250 amp incommer and 05 nos. 63 amp outgoing MCCB.

Exhaust unit Control Panel with 100 amp 3 nos DOL starter

APFC PANEL 200 KVAR

UPS panel with 400 amp incommer and 6 nos. 100 amp outgoing MCCB.

Utility Panel with 250 amp incommer and 04 nos. 63 amp outgoing MCCB.

Main PCC PANEL with 2500 amp incommer and 10 nos. 630 amp outgoing MCCB and 2500 amp bus coupler for transformer.

Solar Street Light (45 watt) Lithium ion battery pack with motion sensor with 5 year warranty

TPDBs

8 WAY Three phase Distribution Board with Vertical Double door type (VTPN DB) with 125A 4P MCCB as a incomer & 8 Nos. 32A TP MCB as outgoing circuit with top and bottom Adaptor Box. MCB shall be provided with “C” curve.

Supply & Errection of 8 Way 7 SEGMENT DB. (RPDB & FHDB)

Incomer-63A 4P MCB-1Nos

Sub incomer-40A DP RCCB(100mA)-3Nos

Outgoings-16A SP MCB-24Nos

Supply & Errection of 12 Way VTPNDB (MCCB DB). (FOR EQUIPMENT)

Incomer-125A 4P MCCB-1Nos

Outgoings-32A TP MCB-12Nos

Supply & Errection of 12 Way VTPNDB (MCCB DB). (FOR EQUIPMENT)

Incomer-125A 4P MCCB-1Nos

Outgoings-63A TP MCB-12Nos

POWER AND CONTROL CABLES

Supply and Laying of cables

4C x 35Sqmm Cu Ar Cable for VTPNDB

4C x 16Sqmm Cu Ar Cable for RP & FHDB

4C x 10Sqmm Cu Ar Cable for LDB

5C x 4Sqmm Cu Ar Cable for 3Phase FLP Sockets

4C x 4Sqmm Cu Ar Cable for 3Phase FLP Sockets

3C x 4Sqmm Cu Ar Cable for 1Phase FLP Sockets

6 Sqmm Flexible Copper Conductor PVC Insulated Earth Conductor

4 Sqmm Flexible Copper Conductor PVC Insulated Earth Conductor

CABLE TERMINATIONS

Supply and erection of cable terminations

4C x 35Sqmm Cu Ar Cable for VTPNDB

4C x 16Sqmm Cu Ar Cable Termination

4C x 10Sqmm Cu Ar Cable Termination

5C x 4Sqmm Cu Ar Cable for 3Phase FLP Sockets Termination

4C x 4Sqmm Cu Ar Cable for 3Phase FLP Sockets Termination

3C x 4Sqmm Cu Ar Cable for 1Phase FLP Sockets Termination

6 Sqmm Flexible Copper Conductor PVC Insulated Earth Conductor

4 Sqmm Flexible Copper Conductor PVC Insulated Earth Conductor

FLAME PROOF ACCESSORIES

Supply, Installation, testing & commissioning of following type of standard Flame proof switch & socket outlets with accessories.

16A Single Phase, 3 Pin, Industrial type Flame proof socket outlet enclosed in a MS powder coated Enclosure for concealed in wall with all the required accessories along with suitable Flame proof plug.

32A, Three Phase, 5 Pin, Industrial type Flame proof socket outlet enclosed in a MS powder coated enclosure for concealed in wall along with all the required accessories along with suitable Flame proof plug.

LIGHT FIXTURES SYSTEM

SUPPLY & ERECTION OF LIGHTING FIXTURES

45 Watts FLP well glass Light Fixture

34W 2' x 2' LED Light Fixture

EARTHING SYSTEM (For High Sensitive Equipment)

Supply and fixing CI Pipe earth station conforming to IS 3043 complete with 100 mm inner diameter CI pipe of 13 mm thickness and 2.5 m length, 600 x 600 mm brick masonry charcoal, salt, chamber, plastering, CI cover, CI frame, watering funnel, NF/Cadmium plated fasteners, etc.

50 x 6 mm GI Earthing strip

25 x 6 mm GI Earthing strip

25 x 3 mm GI Earthing strip for Cable Tray

25 x 3 mm Cu Earthing strip for LA

SAFETY & MISCELLANEOUS ITEMS

Supply, providing & fixing the following other miscellaneous items:

Rubber mats of 1.1 KV grade 1.8 Mtrs x 0.9mts. and of 12mm thick

Shock treatment chart with teak wood frame and glass cover as required

Electrical single line diagram (As Built drawing )

First Aid Box.

Lightning Arrester CONVENTIONAL TYPE

Supply and installation of vertical air termination with 40 mm dia copper hollow sphere with spikes, fixed on 1000mm length 25mm dia Copper rod including all fixing accessories.

UPS System

Supply, Installation transportation erection installation testing of UPS Emerson Make 60KVA 3P-3P UPS System Including 12V/120AH Exide Make Battery and Battery rack Interlink and main cables with built in isolation transformer with Battery Breaker.

Silent Generator 250 KVA with BMS COMPATBLE DG PANEL with minor civil work required

Heavy-duty engine and world class Stamford alternator powered, Advanced in- cylinder technology to meet latest emission norms without any after-treatment device, to meet stringent exhaust emission tests as per revised MoEF norms diesel generator set. microprocessorbased generator set monitoring, metering and control system with LCD display designed to meet the demands of today’s engine driven generator sets. Intuitive operator interface which includes LED backlit LCD display with tactile feel soft-switches & generator set status LED lamps. Engine protection: Low lube oil pressure, High/Low coolant temperature, Over speed, Battery Over/Under/Weak Volts, Fail to crank/start, Sensor failure

400 KVA Compact Substation

Supply, installation, testing & commissioning of 1.1 KV compact sub station with 400 KVA with complete accessories including HT switch gear of VCB in Sf6 panel and LT panel & complete outdoor enclosure.

Double Door Autoclave

Fully Automatic Triple Walled Horizontal Autoclave consisting of steam outer jacket. Steam jacket allows dry sterilization. Automatic controller operates the electronic Solenoid valve which in turn operates multiport valve for Steam injection inside the chamber, dry sterilization & steam exhaust. Controller and solenoid valve performs purging automatically. When steam pressure inside jacket reaches 17 to 18 psi it automatically cuts off electric supply to heater. Triple walled construction • Dry sterilization cycle • Capacity : 400-500 Liters • Inner and outer MOC Stainless Steel • Temperature 121°C and sterilizing pressure 15 to 18 psi • PID temp controller with inbuilt timer • Two safety spring loaded steam release valve and vacuum breaker • Automatic low water cut off device • Automatic pressure control switch for safety • Multiport valve for operation of various cycle – Off slow, Sterilizing, Fast Exhaust & Vacuum Dry • Touch Screen display

Glassware Washer

Free Standing steam scrubber glassware washer having SS top & bottom racks to accommodate basket inserts for a wide variety of beakers and other wide-mouth laboratory glassware. Specialized inserts for BOD bottles, petri dishes, culture tubes and small utensils make the SteamScrubber versatile. It can accommodate Upper and Lower Spindle Racks (for forced air drying. Compliance: UL 61010-1, CAN/CSA C22.2 No. 61010.1, CE Conformity Mark, ETL listed. Internal Temperature: High Heat up to 199ºF (93ºC)

Laboratory/Industrial Refrigerator ( 900-1000 lit capacity)

microprocessor-based controller • Temperature control ranges between +2 0C to +8 0C that can be set freely • Temperature control is precise to 10C • Accurate temperature display precisely to 0.10C decimal level • Combined with two exact sensors and an auto defrost function • With its temperature recorder, it records 7 days of data. It also has a 72 hour backup battery for recorder and controller work • Equipped with audio and video alarms, such as: High or Low temperature alarm, Door Open alarm, Power Failure alarm, Sensor Failure alarm and Low Battery alarm

Supply and installation of pannel prefabricate shed made from M.s iron frame of size 3x4 meter.

Upgradation of Networking System with Scada Software.

SITC of core switch capacity of 14 Tbps, forwarding performance of 1Bpps with 32 x 1/10G SFP+ports plus 4x 40 G QSFP + ports from day 1 dual hot swappable internal power supply 60K IPV 6 routes and 48K multicast routes should support advance layer 3 (RIPng, OSPF, BGP and MPLS with 1 year support. Stack Module/40 Gig Optics and all other cables should be included in day 1

Approved Make: Cisco/Impulse/Juniper/Exterme/Arista.

SITC of 24 port POE + Access switches with switching capacity of 128 Gbps, forwarding performance 95 Mpps, having 24 x 10/100/1000 BASE-T POE-plus (Rj 45) with minimum POE bubget of 370 w and 4 x 100 SFP + uplink ports should support min 2 GB internal DRAM 2 GB internal flash memory 32 K MAC address 1K IPv 6 Multicast routes, should have static routes from day 1. One year support Approved Make: Cisco/Impulse /Juniper /Exterme /Arista.

SITC of internet security solution with minimum of 100 users form day one with year subscription/license and flexibility to scale upto 200 users in future having 99% uptime with each level redundancy single pane of glass for reporting multi-location and roaming users environment for all the asked features with minimum 3 months of logs retention capacity. OEM must be leaders in gartner magic quadrant in the latest report (2017 and above) and must have features as per attached detailed specification. Approved Make: Zscaler/Checkpoint/Palo Alto/Cisco/Juniper.

Supply and Installation of Scada software system with upgradation

Vasu Scientific Company