COMPREHENSIVE MAINT TO REAPIR OF CIVIL AND ELECTRICAL WORKS TO CERTAIN BLDG IN D AND E IN NORTH ZONE UNDER GE NORTH BINNAGURI

Amount

SCHEDULE `A' ( CIVIL WORK) Taking down chowkats with shutter (without taking off shutter from the frame) exc 1.5 Sqm but n exc 4 sqm each etc including removing material from work site complete all as specified and directed.

Taking down chowkats with shutter (without taking off shutter from the frame) n. exc 1.5 Sqm each etc including removing material from work site complete all as specified and directed.

Taking down shutters of any description exc 1 sq.m and n exc 2 sq.m each and including removing material from work site complete all as specified and directed.

Supply and fixing of pressed steel framed for door with one or more rebates including necessary fixing lugs, hinges, lock strike plates, size of frame 125 X 60 mm, 1.6 mm thickness of sheet, including one shop coat of primer complete all as specified and as directed.

Supply and fixing of 35mm thick 2nd class hard wood factory made, plain, framed, panelled shutter (two panel) with lock rails and panel of 9mm BWP comercial ply or 12 mm thick veneered particle board with comercial veneering on both faces. The size of rail and style as per IS-1003 Part-I klin seasoned and chamicaly pressure treated complete all as specified and as directed.

Supply and fixing of factory made 35mm thick 2nd class hard wood gauged and skeleton shutter open rebated and prepared to received gauge etc (without sash bars) for fly proof door shutter, edges of framing plain, chamfered or rounded, fitted with cut of any mitred beads for securing gauge etc, size of members of shutter as specified in SSR Part-I section 8 clause No.8.23(a) and fitted to chowkats complete all as specified and as directed.

Supply and Fixing solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube supply & fixing in opening as per specification & drawing and as directed.

Supply and Fixing factory made solid panel PVC wood grain printed door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side as gap insert for top rails bottom rail, panelling of plain colour PVC sheet to be fitting in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per specification and drawing and as directed.

Taking down of wooden door shutter of any description area exceeding 1 sqm and n exc 2 sqm each and refixing in same opening after repair/easening complete

Resecuring or easing and adjusting , without taking down of shutter of any description exc 1 sqm and n.exc 2 sqm each complete all as directed.

Supply only of 100 mm long medium weight, mild steel butt hinges cold rolled complete all as specified and directed.

Supply and fixing 150 mm size Extruded aluminium alloy handles, fabricated type, anodised complete all as specified.

Supply and fixing 150 mm size aluminium, anodised, barrel tower bolts of extruded section and fixed, complete all as specified.

Supply and fixing 250 mm long Aluminium alloy. Anodised, sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified.

Supply and fixing in repair factory made steel window with side hung shutters including projecting type hinges with steel handles, and steel peg stay, fixing lugs complete with glazing bar devetailed or welded including one shop coat of red oxide primer compete all as specified and as directed.

Supply and fixing in repair factory made steel window with side hung shutters including projecting type hinges with steel handles, and steel peg stay, fixing lugs complete without glazing bar devetailed or welded including one shop coat of red oxide primer compete all as specified and as directed.

Supply and fixed in repairs factory made steel ventilator top hung shutter including hinges , steel peg stay , fixing lugs etc complete with or without glazing bars including one shop coat of zinc chrome primer compete all as directed.

Supply and fixed in repairs mild steel framed work such as grills , gratings, etc., with ends of bars shouldered and/ or riveted, or forged in to spikes; framed guard bars ; barred iron doors; ladders; framed balusters ; walk ways ; railings; frame work of water tanks and similar work conforming to Fe-290-Gde E-165 complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, removing of unserviceable material from work site complete all as specified and as directed.

Supply and fixed rolled mild steel in framed work as in doors or gates of angle or other section with gusset plates, rails, braces,etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc., to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening .grade Fe-410-W ( Gde-E-250) quality -B complete all as specified.

Material and labour for preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamelled paint (1st quality) over one coat of red oxide Zinc chrome primer complete all as specified.

Material and labour for preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamelled paint (1st quality) complete all as specified.

Material and labour for preparation of new wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamelled paint (1st quality) over a coat of pink primer complete all as specified.

Hacking out old broken glass ( any thickness , size , quality or description) from wooden/metal frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads upto 1.5 sqm complete all as specified.

Supply and fixing 3 mm thick (nominal) Sheet glass, ordinary quality , in squares, not exceeding 0.50 sqm each each pane fixed with oil putty complete all as specified.

Supply and fixing 3 mm thick frosted glass, pin head type and ordinary quality , in squares, not exceeding 0.50 sqm each each pane fixed with oil putty complete all as specified.

Material and labour for plain cement concrete 1:3:6 type C-1 using 20 mm graded crushed stone aggregate as in fixing of hold fast ,bed blocks parapet, cills, coping, filling concrete in PS door frames, filling gaps in between glazed and flyproof steel window, cills and similar works including necessary form work as required complete all as specified and as directed.

Supply and fixed in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

Supply and fixed stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

Demolition Brickwork or stone boulder masonry, built in cement mortar or cement lime mortar including all quoins,arches, pillars,etc. but excluding ashlar facings, dressed stonework and precast concrete articles including removing of demolished materialfrom work site complete all as specified.

Material and labour for brickwork with fly ash bricks, old size, having compressive strength 75Kg / sqcm, straight or curved on plan excd 6 M mean radius in built in cement and sand mortar 1:6 complete all as specified.

All a sper Item No 30 here-in-before but using serviceable bricks retrived from demolition under item No 29 here-in-before in cement mortar (1:6) complete all as specified and as directed.

Taking down cement plaster on brick or stone walls etc. including racking out joints, hacking for key, scrubbing down with water, any description etc.including removing of rubbished material from work site complete all as specified.

Material and labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces , in cement and sand mortar 1:4 using water liquid water proofing compound @ 200 ml per bag of cement or as per manufacturer's instructionscomplete all as specified top surfaces finished fair and even without using extra cement complete all as specified. (WPC shall be apply in second layer and measured and paid separately)

Material and labour for rendering 5mm thick on concrete surfaces in ceiling , in cement and sand mortar 1:3 complete all as specified

Material and Labour for rendering 15 mm thick on fair faces of brick or concrete surfaces finishing surfaces fair and even without using extra cement in Cement mortar 1:6 all as specified and directed.

Supply only Integral liquid water proofing compound conforming to IS-2645-2003 complete all as specified.

Material and labour fo preparation of new plastered or unplastered surafces of walls and applying three coats of white wash including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified .

Material and labour fo preparation of new plastered or unplastered surafces of ceilings and applying three coats of white wash including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified .

Material and labour for preparation of old plastered or unplastered surfaces of wall by brooming down or steel wire brushing ; scrapping down smoke soot , moulds, moss and efflorescent salts and treating oil and greasy spots and applying one coat of white wash on old decorated surfaces of wall including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified .

Material and labour for preparation of old plastered or unplastered surfaces of ceiling by brooming down or steel wire brushing ; scrapping down smoke soot , moulds, moss and efflorescent salts and treating oil and greasy spots and applying one coat of white wash on old decorated surfaces of ceiling including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified .

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), in floors, aprons etc .laid dry or laid dry and pointed including removing of demolished material from work site at any distance outside MD land complete all as specified and directed.complete all as specified.

Material and labour for Non Skid ceramic coloured tiles (1st quality) 7 to 8mm thick ( square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screeding in CM 1:6 complete all as specified (Note : screed bed shall not be measured and paid separately).

Material and labour 20 mm thick Granite ( of any type) work ( table rubbed and polished) in steps , jambs, pillars, window cills, cooking plateforms and like in cement mortar ( 1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 20mm thick screeding in CM 1:4 complete all as specified. ( Note Screed bed shall not be measured and paid separately).

Material and labour for glazed ceramic coloured / digital printed of size (300 x 200 mm / 300 x 450 mm x 7 mm thick ) as in vertical surfaces such as skirting/dado / riser to steps etc conforming to IS - 13712 grade IB-III set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including cement screed bed / backing layer of 10mm thick in cement mortar (1:4) complete all as specified and as directed. (Note : screed bed shall not be measured and paid separately).

Material and labour for Non Skid ceramic coloured tiles (1st quality) 7 to 8mm thick ( square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screeding in CM 1:6 complete all as specified (Note : screed bed shall not be measured and paid separately).

Demolition of cement concrete ( unreinforced ) in ground floors and pavings not exceeding 15 cm thick above or below ground level, including removing of demolished material from work site at any distance outside MD land complete all as specified and directed.

Material and labour for prepolished chemically treated coloured chequered cement concrete tiles of size 300 mm x 300 mm x 25 mm thick set, jointed and pointed in neat slurry in floors and steps with grey cement and pigments laid over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified ( Note : screed bed shall not be measured and paid separately).

Material and labour for 75mm thick PCC (1:3:6), type C-2 (using 40 mm graded crushed stone aggregate ) as in plinth protection; pathway / hardstanding etc laid in bays / panels not exc. 2.00 Sqm each including construction joints at suitable interval and each corner and filled with bituminous mastic filling (1 part bitumen & 3 part sand) and finished the surface even and smooth without using extra cement complete all as specified.

Taking up or down steel tubing and connections, including cleaning for re-fixing and removal of unserviceable pipe from work site,15 mm bore dia all as directed.

Taking up or down steel tubing and connections, including cleaning for re-fixing and removal of unserviceable pipe from work site, 20 mm bore dia all as directed.

Supplying , laying, jointing and testing 15 mm nominal bore Steel water tubes, 'medium grade' ,galvanised , with all fittings ; fixed to walls and ceilings or laid in floors complete all as specified.

Supplying , laying, jointing and testing 20 mm nominal bore Steel water tubes, 'medium grade' ,galvanised , with all fittings ; fixed to walls and ceilings or laid in floors complete all as specified.

Refixing old steel tubing and connections in new or old position ( walls, ceiling , floors, etc.)15 mm nominal bore dia, including new fittings complete all as specified ( Note:- Refixing means including cleaning down existing pipes and fittings. )

Refixing old steel tubing and connections in new or old position ( walls, ceiling , floors, etc.)20 mm nominal bore dia, including new fittings complete all as specified ( Note:- Refixing means including cleaning down existing pipes and fittings. )

Cutting chases in brick work, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades,shelves, lintels,etc; and cutting chases for concealed water tubing or concealed conduit wiring, etc.,and making good, cutting not exc 10 cm girth complete all as specified.

Supply and fixing of PVC water storage tank of capacity 500 Ltr HDPE double layered, cylindrical type fixed nd hoisted in position on roof at any height complete with inlet / outlet of 20 mm GI pipe connection including locking arrangement, including proviiding and fixing ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe 20 mm dia and (minimum weight 20mm - 210 grms) complete all as directed including taking down and removing unserviceable tank from work site complete all as specified

Supply and fixing of PVC water storage tank of capacity 1000 Ltr HDPE double layered, cylindrical type fixed nd hoisted in position on roof at any height complete with inlet / outlet of 20 mm GI pipe connection including locking arrangement, including proviiding and fixing ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe 20 mm dia and (minimum weight 20mm - 210 grms) complete all as directed including taking down and removing unserviceable tank from work site complete all as specified

Supply and fixing in repairs ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 210 gms complete , screwed for 20 mm bore dia. pipe or brass ferrule complete all as specified.

Supply and fixed in repair CP cast copper alloy Bib taps suitable for 15 mm bore pipe screwed down , screwed for iron pipe or for brass ferrule and fixed complete all as specified .

Supply and fixed in repair, CP stop cock ( concealed type) long fancy type screwed down for 15 mm bore dia. pipe, high pressure, with crutch handle , screwed externally both ends for unions etc. and fixed complete all as specified

Supply and fixed in repair PTMT ( Polytetra Methyllene Terephthalate ) Stop cock suitable for 15 mm bore pipe standard of PTMT any colour high pressure screwed for iron pipe and fixed ( Minimum weight 15 mm-90 gms complete all as specified .

Supply and fixed in repair PTMT ( Polytetra Methyllene Terephthalate ) Swivel shower suitable for 15 mm bore pipe standard of PTMT any colour screwed, for iron pipe and fixed ( Minimum weight 40 gms complete all as specified .

Supply and fixed in repair CP angular stop cock fancy type, screwed down for 15 mm bore dia. pipe, high pressure, with crutch handle , screwed externally both ends for unions etc. and fixed complete all as specified .

Supply and fixed in repairs vitreous china wash basin (WHB) , white , flat back , size 550 mm x 400 mm (1st quality) including brackets, waste fittings , brass Chromium plated for glazed basins etc. with long screw shanks and fly nuts , flange end embedded in red lead cement , including cutting for and pinning in ends of brackets or erecting stand but but incl providing brackets, waste pipe & CP waste coupling , PVC connection 450 mm long complete all as specified and as directed.

Supply and fixed in repair, 15 mm bore dia of pipe , chromium plated ,pillar taps, fancy type, cast copper alloy , with capstan heads, screwed down for 15 mm bore pipe,high pressure , with or without l'ettered ' 'HOT' or 'COLD' with long screwed shanks and fly-nuts , screwed for iron pipe complete all as specified.

Supply and fixed in repairs vitreous China white Squatting pan ,'Orissa' pattern size 580 mm x 440 mm with integral footrests water closet) with 'P' or 'S' trap front or back inlet complete including lime concrete for bedding, connection to drain pipe and to flushing pipe , anti syphonage pipe etc complete all as specified.

Supply and fixed in repairs white vitreous china wash down water closet pan (pedestal pattern) EWC, with ‘P’ or `S' trap, including fixing bolts, Plastic water closet seat and cover, closed pattern with flat bottom, and mild steel chromium plated or aluminised hinging device, including making all necessary connections complete all as specified and as directed.

Supply and fixed in repairs low level flushing cistern (dual-flush), 9-10 litres capacity ISI marked embossed moulded from virgin poly propylene including flush pipe complete all as specified and directed.

Supply and fixed in repairs of Vitreous China bowl urinal flat back, size of 465x355x265 mm White ( minimum) including providing and fixing plugs, bedding the urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement and providing grating and union for discharge pipe including 32mm bore PVC discharge pipe complete all as specified and as directed.

Supply and fixing in repair Vitreous China Urinal partition white of size 310 x 700 mm fixed in position with screws complete all as directed.

Supply and fixed in repairs of grating doom 125 mm dia of PTMT (Minimum weight 40gms) with waste hole complete all as specified.

Supply and fixed in repairs of 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with necessary clamps complete all as specified including taking down old unserviceable pipe including fittings.

Supply and fixing PVC (SWR) bends 110 mm bore of any radius without acess door complete all as specified

Supply and fixing in repairs PVC (SWR) 110mm bore junction single 'T' equal or unequal with access door complete all as specified.

Supply and fixing in repairs110mm dia PVC (SWR) branch piece, single ‘Y‘ equal or unequal Complete all as specified and as directed.

Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for including removing of demolished material from site complete all as specified and as directed.

Material and labour for re-inforced cement concrete type B-1 (1:2:4), using 20 mm graded crushed stone aggregate, as in fins, fascias, louvers, parapets, and railing exc. 60 cm in height, newels, balustrade, and the like complete all as specified.

Material and labour for use and waste form work to sides of fins, louvers, fascia and similar work; vertical or to batter) surfaces rough finished complete all as specified.

Material and labour for Mild steel deformed or twisted bars ( TMT) 8/10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire ( annealed) not less than 0.90 mm dia. or higher complete all as specified.

Dismantling of corrugated steel sheets in roof coverings including ridges, removing of unserviceable material from work site complete all as specified and as directed.

Supply and fixed Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.

Supply and fixed Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in as in ridges, valley, eaves, etc with self tapping screws as specified.

Demolition of existing roof treatment complete of any description and in Taking down existing tarfelt including tiles, lime concrete and screed bed complete from roof surfaces including parapets and lowering and removing the same to a distance exc. 50m and n. exc.100m including roughening of old concrete surface of roof, cleaning the surface by wire brushing to remove all loose dust etc complete all as specified and directed.

Material and labour for 10 mm thick screed bed or bedding layers in cement mortar (1:4) in order to maintain proper slope over existing roof surfaces finished even and smooth without using extra cement for receiving treatment complete all as specified and directed.

Material and labour for water proofing treating to RCC roof with providing and applying single component acrylic polymer modified, fibre reinforced waterproof coating Roof Guard in 4 coats of application:- (a) apply primer coat with primer @ 0.3 Kg /sqm, (b) Over primer coat apply water proofing fibre reinforcement a length of appox 1 Mtrs @ 0.75 kg/Sqm on flat surface and ensure that there is no bubbles of creases, overlapping of the fibre is minimum of 50 mm and allow this coat dry for a period of 2-6 hours depending on atmospheric condition. (c) Apply second coat of water proofing coat @ 0.75 Kg/Sqm. (d) Apply final coat of primer @ 0.08 kg/Sqm after seconf coat dried properly. (Note : Water proofing treatment work shall be carried out by applicator of manufacturer only duly approved by GE in writiing.

Supply fabricate & fix in position anodised aluminium powder coated (minimum thickness of powder coating 50 micron) three track window ( two shutters glazed & one shutters wire gauge) with frame, glazed with 5.5 mm thick tinted glass and, wire gauge with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm including rubber bead joining cleat for fixing in position, concealed type lock for all three shutter, PVC roller etc all as specified below,including the cost of EPDM rubber /neoprene gasket required complete all as specified and directed by Engr-in-charge including taking down old unserviceable shutter with frame (a) Frame (top, bottom & side) section shall of size 92.00 x 31.75 x 1.50 mm (b)Top & side Members of shutter Section shall be be of size 18.00 x 40.00 x 1.55 (d) Shutter Interlock Section shall be be of size 18.00 x 40.00 x 1.45 (e) Bottom Members of shutter Section shall be of size 18.00 x 40.00 x 1.55 Note:- Section No given above are of make Jindal, Contractor may use similar section of other make mentioned in relevent Appx.

S&F powder coated anodized aluminium door made out hollow extruded aluminium sections as mentioned below. Each door having 02 Nos disk or D type handles of 200mm long, 02 Nos aluminium tower bolt of 200mm size, 1 no mortice lock of six levers with key in duplicate regulated by double acttion hydroulic floor door spring (Make Sandhu /Titz ) shutter to be paterly glazed with 5mm thick tinned glass and partly panelled with 12mm thick prelaminated particle board fixed with glazing clips rubber beading /gasket anodized aluminium beading screws complete including taking down old unserviceable shutter with frame (a) Chowakat frame : 100 x44 x1.60 mm (b) Shutter verticle style : 100 x44 x1.60 mm (c) Shutter lock rail : 150 x44 x1.60 mm (d) Shutter Top rail : 100 x44 x1.60 mm (e) Shutter bottom rail : 200 x44 x1.60 mm

Supply and fixing in repairs CP Brass Tubular towel rail, 20 mm dia. D type, 60 cm long between flanges with bracket complete all as specified.

Supply and fixing in repairs chromium plated health faucet 25 mm dia with 1.5m flexible tube and wall hook fixed in position complete all as directed.

Supply and fixing in repairs PVC (SWR) multi floor trap of size 75 mm / 110mm , plain with grating including jointing with solvent cemnt complete all as specified and as directed.

Supply and fixed in repairs CP Brass water Jet assembly with flexible PVC pipe 1.0 metre length connector to EWC water closet complete all as specified.

INTERNAL ELECTRIFICATION Taking down carefully aluminium conductor point wiring (light,fan,socket or power) complete including fittings such as switches,ceiling roses, pendants, regulators ,sockets etc. and removing (except those to be reused shall be kept in safe custody at the site ) and making good disturbed surfaces of walls, floors etc.to match with the existing complete all as specified.

Material & Labour for consealed type point wiring with 1.50 Sqmm (nominal cross sectional area) PVC insulated (FRLS) unsheathed single core multi stranded copper conductor cable of working voltage 1100 volts grade conforming to IS-694 Pt I & II of 2000 drawn through and including PVC conduit of adequate size having a wall thickness not less than 1.5 mm with all accessories (including cutting chases & making good the disturbed surface to its original specification), including provision of 1.5 Sqmm (nominal cross sectional area) PVC insulated (FRLS) unsheathed single core multi stranded copper conductor cable as earth continuity conductor, connected to main switch / DBs or common earth dolly for one light / fan point / exhaust fan/bell point controlled by one 5 Amps one way switch complete all as specified and as directed . Note: Red coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board.

All as per item No.95 here-in-before but for one socket out let 5/6 amps point on the independent board

All as per item No.95 above but One socket out let 5/6 amps point on the same board complete all as specified.

All as per item No.95 above but One light point controlled by two way switch 5/6 amps.

Material and labour wiring for 5/6 pin 6/16 Amp switch socket combination on independent boards controlled by one, one way switch using 2.5 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLS cables in and including 20 mm dia or higher size PVC concealed conduits and fittings, including pressed steel terminal switch boxes, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers and 2.5 sqmm nominal cross sectioanl area multistranded copper conductor , PVC insulated unsheathed FR earth wire and connecting to earth dolly and brass screws, washers etc. including cutting chases pinning in for concealed conduit wiring and making good of disturbed surface n exc 15 cm girth complete all as specified.

Supply and fixed switch piano flush type, single pole , 6 Amps, one way complete all as specified.

Supply and fixed switch piano flush type, single pole , 6 Amps, two ways complete all as specified.

Supply & fixed Bell push , flush type 230 Volts , 5/6 amp complete all as specified.

Supply and fixed socket 2 in 1, 5 Pin, 5/6 amps, any type complete all as specified and as directed.

Supply and fixed socket 2 in 1, 5 Pin, 5/15 amps, multipurpose 230 volts flush type complete all as specified and as directed.

Supply and fixed in repairs switch socket combination 2 and 3 pin , 5 / 6 Amps , multipurpose flush non shutter, non inter locking type white ivory finish with complete all as specified and as directed.

Supply and fixed in repairs switch socket combination 2 in 1 , 6 pin , 5 / 6 Amps and 15/16 Amps multipurpose flush non shutter, non inter locking type white ivory finish with complete all as specified and as directed.

Supply and fixed switch piano flush type, single pole , 15/16 Amps, one way complete all as specified.

Supply & fixed ceiling rose surface bakelite 65 mm x 50 mm two to three terminal suitable for 230 Volts AC 6 Amps complete all as specified.

Supply & fixed stepped type electronic fan regulator flush type 240 Volts ISI marked complete all as specified .

Supply and fixed in repairs switch piano flush type, single pole , 6 Amps, one way complete all as specified.

Supply and fixed in repair switch in repairs socket combination 2 and 3 Pin, 5/6 amps, multipurpose of any type flush type controlled by one switch complete all as specified.

Supply and fixed in repairs socket 2 in 1, 5 Pin, 5/6 amps, any type complete all as specified and as directed.

Supply and fixed in repairs switch socket combination 2 in 1, 6 pin 5/6 amps and 15/16 amps multipurpose, of any type complete all as specified.

Supply & fixed in repairs modular fan regulator 120 watts 230 volts 50 hz 2 module complete all as specified .

Supply & fixed in repairs lamp holder, PVC/polycarbonate type with back plate straight or angular suitable for batten fittings complete all as specified.

Supply & fixed LED white glass Lamp 1 x 09 Watts, 230V Base-22 complete all as directed.

Supply & fixed in repairs call bell suitable to work on 230 volts AC supply complete all as directed.

Supply & fix sheet metal enclosure for 8 way Distribution Boards (DB’s), double door , single pole and neutral with 200 amps rated bus bar, including bus bar neutral link, earth bar and din rail, IP-43, IK-09 protection including gasket and door earthing suitable for fixing MCBs/isolators fixed on wall surface and making good the disturbed surfaces of wall and connecting up including taking down old unserviceable one including MCCB / MCB complete all as specified and as directed.

Supply and fixed in repairs epoxy powder coated sheet metal enclosure for DBs, double door (when MCBs to be used), Triple pole and neutral 415 V, 4 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact complete all as directed.

Supply and fixed in repairs MCB SPN 40-63 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessry connection all as specified and directed. (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).

Supply and fixed in repairs MCB SP, 6 to 32 Amps, 'C' series 10kA, 240 Voltsand to be housed in DBs including necessry connection complete all as specified and directed. (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).

Supply and fixed in repairs MCB TPN 40 to 63 Amps, 'C' series 10kA, 415 Volts and to be housed in DBs complete including necessry connection all as specified and directed. (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).

Materials and labour for Sub main wiring with 2 runs of 6.00 Sqmm (nominal cross-sectional area) PVC insulated unsheathed single core flame retardant cable (FRLS) of working voltage 1100 volts grade with stranded copper conductor including one run of 6.00 Sqmm (nominal cross sectional area) PVC insulated unsheathed flame retardant cable (FRLS) with stranded copper conductor as continuous earth wire connected to main switches DBs or in common earth dolly, drawn through and including PVC rigid non- metallic PVC conduit / casing and capping ISI marked , medium garde of adequate size with all conduit / casing and capping accessories ISI marked as required complete all as specified and as directed including taking down old unserviceable / burnt / damaged one. [NOTE : Two run of sub main wiring cable along with one run of earth wire and one run of PVC Conduit / casing and capping shall be measured as one length]

Materials and labour for Sub main wiring with 2 runs of 4.00 Sqmm (nominal cross-sectional area) PVC insulated unsheathed single core flame retardant cable (FRLS) of working voltage 1100 volts grade with stranded copper conductor including one run of 4.00 Sqmm (nominal cross sectional area) PVC insulated unsheathed flame retardant cable (FRLS) with stranded copper conductor as continuous earth wire connected to main switches DBs or in common earth dolly, drawn through and including PVC rigid non- metallic PVC conduit / casing and capping ISI marked , medium garde of adequate size with all conduit / casing and capping accessories ISI marked as required complete all as specified and as directed including taking down old unserviceable / burnt / damaged one. [NOTE : Two run of sub main wiring cable along with one run of earth wire and one run of PVC Conduit / casing and capping shall be measured as one length]

Supply and fixed in repairs for Single pole and neautral enclosure with a two pin and earth plug and socket complete with one single pole MCB, 32 Amps, 240 Volts, including necessry connection complete all as specified including taking down old one

Supply and fixing of LED light fittings 1 x 18/20 watts 230 Volt white powder coated slim box type batten made of formed CRCA with snap on installer LED lighting fixture with and including 1x18/20 watt T8 double side connection retrofit LED tube with G13 lamp holders, connector block, complete with all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable up to cealing rose complete all as specified and directed.

Supply and fixed in repairs new generation energy saving and environmental friendly long life LED street light fitting with 25 watts LED made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having top opening including separate driver comportment with IP 66 protection & impart resistance of IKO7 with operating voltage range of 140V to 270 V olts, 100 lLumen per watt complete with all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable up to cealing rose and 32mm dia 1.5 mtr long bend to required shape complete all as specified.

Supply and fixing in repairs Decorative wall light fixture made up of polycarbonate suitable for 15 watts LED retrofit of type B-22 base , IP 66 grade, with and including 15 watts LES lamp and connecting up with and including PVC insulated 3 core of size 0.75 sqmm copper conductor from ceiling to terminal block of light fitting all as specified and directed .

Supply and fixing bulk head fitting suitable for 1X 10Watt LED surface mounted energy saving, decorative oval type , IP 66 protection and necessary electric connection with PVC insulated twin twisted flexible copper wire with and including one No 10 Watt LED lamp and all accessories, complete all as specified and as directed.

Supply and fixing LED tube light fittings 1 x 9/10 watts energy efficient, 230 V incl 1x9/10 watt LED tube, surface / wall mounted LED batten with aluminium housing and integrated driver including holders, connector block etc. complete with all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable all as specified and directed.

Supply and fixed in repairs 15 watt LED lamp Post top lantern Black ABS plastic spigot, spun aluminium canopy with opal acrylic diffuser and accessories , integral fedora hat post top lantern with clear acrylic for mounted on post and 2 metre long GI tubing medium grade 50mm dia including grouted in ground with with necessary PCC work , making connection with two single core 1.5 sqmm stranded copper conductor cable from connector to light fitting all as specified.

Supply and fixed in repairs recessed mounted flat panel LED luminaire of size 2' x 2' of 34 watts for grid ceilingwhite powder coated CRCA housing complete with full window acrylic diffuser & electronic driver, high brightness SMD LEDs etc with minimumm lumen output 3400 lumen, pre-treated CRCA frame powder coated with diffused Profied including necessary connection complete all as specified and directed.

Supply and fixed in repairs recessed round shape LED ceiling light 12 watts of size 6" outer dia for armstrog / grid ceiling , white powder coated CRCA housing complete with full window acrylic diffuser & electronic driver, high brightness SMD LEDs etc with minimumm lumen output 3400 lumen, pre-treated CRCA frame powder coated with diffused Profied including necessary connection complete all as specified and directed.

Supply and fixed in repairs factory made sheet metal box made out of 2mm thick MS sheet of size not less than 600 x 900 x 200 mm with double door hinged shutter and locking arrangement foe fixing of DBs , KWH Meter etc flashed / grouting on wall including painting with two cotes of powder coated paint over a coat of red oxide primer with suitable glass vison panel of each meter shall be provided in the door for esy meter reading, complete all as directed.

Supply and fixed in repairs moulded case circuit breaker (MCCB) four pole adjustable type 415 volts , 50 cycles, 160 Amps of breaking capacity 36 kA complete all as directed

Supply and fixing in repairs hylam sheet 3 mm thick white in colour of size 120 mm x 120 mm complete all as specified and directed.

Supply and fixing in repairs hylam sheet 3 mm thick white in colour of size 120 mm x 170 mm complete all as specified and directed.

Supply and fixing in repairs hylam sheet 3 mm thick white in colour of size 200 mm x 170 mm complete all as specified and directed.

Supply and fixing in repairs hylam sheet 3 mm thick white in colour round type of size 80 mm dia i complete all as specified and directed.

M/S SINHA ENTERPRISE

M/s PATEL ENGINEERING

samrat saw mill and joinery workshop

M/S MOHAN KUMAR BANSAL

M/s. S.K. TRADING

S. G. CONSTRUCTION

N K Construction

TECHNOSOFT