Furniture Work Of Centre of Excellence at Mohammadpura. Dist-Kheda (Incl Electrification ).

Name of Work:- Furniture Work Of Centre of Excellence at Mohammadpura. Dist-Kheda (Incl Electrification ).

Statement Showing the Approximate Quantities for items of the above work to be Carried out

Item No. Description of Item Total Qty. Unit Estimate Estimate Rate Rs. in Amount

Rate Rs. Words Rs.Ps

Item No. Description of Item Total Qty. Unit Estimate Estimate Rate Rs. in Amount

Rate Rs. Words Rs.Ps

1 Table: Size: (2.40 x 0.90 x 0.76) 1.00 NO 35809.84 Rs. Thirty Five

Provinding and fixing 19mm thick plywood top table with fixing 25mm thick Thousand Eight

plywood (19mm + 6mm) patta of 300mm width fixed on bottom periphery Hundred Nine & Paise

.The plywood table top is laminated on top and bottom.the front edges of Eighty Four Only

the table top surface is to be covered with 12mm thick teak wood bedding

patty with melamine polish finish of approved shed.The Rate includes the

cost of fixing telescopic suspended metal keyboard with mouse tray. 38mm

thick vertical legs made from plywood with exterior side 1mm and interior

side 0.8mm approved laminate. Appron should be made from plywood with

laminated finish as per detail drawing and CPU Trolley should be supplied of

metal powder coated. Footrest (0.75 x 0.37) should be from teakwood with

melamine polish complete.Seperate Drawer unit box (0.65 x 0.41 x 0.43) to

be made from 19mm plywood with 1mm outside and 0.8mm inside

laminate as well as approved shade for Left or Right sidewith wooden

bidding patti on nylon castors with handle,lock and telescopic channel. Fix

12mm toughen frosted or Back painted glass in front of the table and fixing

the corian of 6mm thick on top having size of 4'0" x 2'0" as per given

drawing of the table top. Rate includes the cost of all materials and labour

etc. complete as per detail drawing and instruction of engineer-in

charge.The necessary hardware fitting shall be as per approved make list of

Item No. Description of Item Total Qty. Unit Estimate Estimate Rate Rs. in Amount

Rate Rs. Words Rs.Ps

2 Table: Size: (1.83 x 0.90 x 0.76) 4.00 NO 18679.54 Rs. Eighteen Thousand

Provinding and fixing 19mm thick plywood top table with fixing 25mm thick Six Hundred Seventy

plywood (19mm + 6mm) patta of 300mm width fixed on bottom periphery Nine & Paise Fifty Four

.The plywood table top is laminated on top and bottom.the front edges of Only

the table top surface is to be covered with 12mm thick teak wood bedding

patty with melamine polish finish of approved shed.The Rate includes the

cost of fixiing telescopic suspended metal keyboard with mouse tray.

38mm thick vertical legs made from plywood with exterior side 1mm and

interior side 0.8mm approved laminate. Appron should be made from

plywood with laminated finish as per detail drawing and CPU Trolley should

be supplied of metal powder coated. Footrest (0.75 x 0.37) should be from

teakwood with melamine polish complete.Seperate Drawer unit box (0.65 x

0.41 x 0.43) to be made from 19mm plywood with 1mm outside and

0.8mm inside laminate as well as approved shade for Left or Right sidewith

wooden bidding patti on nylon castors with handle,lock and telescopic

channel.Rate includes the cost of all materials and labour etc. complete as

per detail drawing and instruction of engineer-in charge.The necessary

hardware fitting shall be as per approved make list of GSPHCL.

Item No. Description of Item Total Qty. Unit Estimate Estimate Rate Rs. in Amount

Rate Rs. Words Rs.Ps

3 Table: Size: (1.52 x 0.76 x 0.76) 7.00 NO 16622.62 Rs. Sixteen Thousand

Provinding and fixing 19mm thick plywood top table with fixing 25mm thick Six Hundred Twenty

plywood (19mm + 6mm) patta of 300mm width fixed on bottom periphery Two & Paise Sixty Two

.The plywood table top is laminated on top and bottom.the front edges of Only

the table top surface is to be covered with 12mm thick teak wood bedding

patty with melamine polish finish of approved shed.The Rate includes the

cost of fixing telescopic suspended metal keyboard with mouse tray. 38mm

thick vertical legs made from plywood with exterior side 1mm and interior

side 0.8mm approved laminate. Appron should be made from plywood with

laminated finish as per detail drawing and CPU Trolley should be supplied of

metal powder coated. Footrest (0.75 x 0.37) should be from teakwood with

melamine polish complete.Seperate Drawer unit box (0.65 x 0.41 x 0.43) to

be made from 19mm plywood with 1mm outside and 0.8mm inside

laminate as well as approved shade for Left or Right sidewith wooden

bidding patti on nylon castors with handle,lock and telesccopic

channel.Rate includes the cost of all materials and labour etc. complete as

per detail drawing and instruction of engineer-in charge.The necessary

hardware fitting shall be as per approved make list of GSPHCL

Item No. Description of Item Total Qty. Unit Estimate Estimate Rate Rs. in Amount

Rate Rs. Words Rs.Ps

4 Side Table: Size: (1.07 x 0.46 x 0.69) 6.00 NO 14552.22 Rs. Fourteen

Providing and fixing 25mm thick (19mm+6mm) plywood laminated on top Thousand Five

and bottom with 6mm thick plywood at backside in approved laminate Hundred Fifty Two &

shade with exterior side 1mm and interior side 0.8mm approved laminate. Paise Twenty Two

Drawer unit box (measurement shown in drawing) with wooden bidding Only

patti, lock,handle and telescopic channel should be made from 19mm

plywood with 1mm outside and 0.8mm inside laminate.The Rate includes

the cost of shutter with Magnet, Multiple drawer lock, S.S. Legs (75mm

height) in bottom, Auto hinges. Including all materials and labour etc.

complete as per detail drawing and instruction of engineer-in charge.The

necessary hardware fitting shall be as per approved make list of GSPHCL.

Item No. Description of Item Total Qty. Unit Estimate Estimate Rate Rs. in Amount

Rate Rs. Words Rs.Ps

5 Three Seater Sofa Providing and supplying the sofa will be total prepared in 2.00 NO 26231.05 Rs. Twenty Six

metal structure. So, 50mm x 50mm sq. metal furniture pipe section created Thousand Two

necessity support for 3 seaters sofa. Seat support also been in same metal Hundred Thirty One &

section. In the metal section, the finished seating must be 0.78mm length x Paise Five Only

0.53mm width. 3 Seater also created. then Z-Section spring use and on top

4''.0' rubber cushion and top 25mm thick and 32 density U-Foam finished

with leather rexin as per selected sample. At back support also 0.53mm

width x 0.74 mm for 3 seater back, fitted with 2''.0' rubber cushion with

25mm U-Foam with 32 density appropriate 3'' angle support, also done

finishing along with leather finished. To adding the decorative part 12mm

dia. S.S. chrome pipe finish with legs and handle support also as shown in

drawing to create decoration and strengthening support. Including all

materials and labour etc. complete as per detail drawing and instruction of

engineer-in charge.

Item No. Description of Item Total Qty. Unit Estimate Estimate Rate Rs. in Amount

Rate Rs. Words Rs.Ps

6 One Seater Sofa Providing and supplying the sofa will be total prepared in 4.00 NO 9798.82 Rs. Nine Thousand

metal structure. So, 50mm x 50mm sq. metal furniture pipe section created Seven Hundred Ninety

necessity support for 2 seaters sofa. Seat support also been in same metal Eight & Paise Eighty

section. In the metal section, the finished seating must be 0.78mm length x Two Only

0.53mm width. 2 Seater also created. then Z-Section spring use and on top

4''.0' rubber cushion and top 25mm thick and 32 density U-Foam finished

with leather rexin as per selected sample. At back support also 0.53mm

width x 0.74 mm for 2 seater back, fitted with 2''.0' rubber cushion with

25mm U-Foam with 32 density appropriate 3'' angle support, also done

finishing along with leather finished. To adding the decorative part 12mm

dia. S.S. chrome pipe finish with legs and handle support also as shown in

drawing to create decoration and strengthening support. Including all

materials and labour etc. complete as per detail drawing and instruction of

engineer-in charge.

Item No. Description of Item Total Qty. Unit Estimate Estimate Rate Rs. in Amount

Rate Rs. Words Rs.Ps

7 Two Seater Sofa Providing and supplying the sofa will be total prepared in 1.00 NO 17802.66 Rs. Seventeen

metal structure. So, 50mm x 50mm sq. metal furniture pipe section created Thousand Eight

necessity support for 2 seaters sofa. Seat support also been in same metal Hundred Two & Paise

section. In the metal section, the finished seating must be 0.78mm length x Sixty Six Only

0.53mm width. 2 Seater also created. then Z-Section spring use and on top

4''.0' rubber cushion and top 25mm thick and 32 density U-Foam finished

with leather rexin as per selected sample. At back support also 0.53mm

width x 0.74 mm for 2 seater back, fitted with 2''.0' rubber cushion with

25mm U-Foam with 32 density appropriate 3'' angle support, also done

finishing along with leather finished. To adding the decorative part 12mm

dia. S.S. chrome pipe finish with legs and handle support also as shown in

drawing to create decoration and strengthening support. Including all

materials and labour etc. complete as per detail drawing and instruction of

engineer-in charge.

8 Corner Tipoi : Size: (0.675 x 0.675 x 0.46m)Providing and fixing 12mm thick 3.00 NO 5444.68 Rs. Five Thousand

designer glass top supported with SS stud with 19mm thick plywood frame Four Hundred Forty

(shown in detail drawing) with 1mm approved laminate finish with nylon Four & Paise Sixty

buffers and including all materials and labour etc. complete as per detail Eight Only

drawing and instruction of engineer-in charge and consultant.

9 Providing and supplying High back leatherette / black mesh fabric chair as 5.00 NO 12482.10 Rs. Twelve Thousand

per approved brand and model. (Brand and model as per HOF-Model- Four Hundred Eighty

Marco 1001 / Godrej-Model-THRILL HIGH BACK / Wipro-Model-Define / Two & Paise Ten Only

Featherlite-Model-Halix HB / Merrifare-Model-Wau HB)

Item No. Description of Item Total Qty. Unit Estimate Estimate Rate Rs. in Amount

Rate Rs. Words Rs.Ps

10 Providing and supplying Medium back chair for Staff & Officer's Visitor as 22.00 NO 10465.00 Rs. Ten Thousand Four

per approved brand and model. (Brand and model as per HOF-Model- Hundred Sixty Five

Marco 1002 / Godrej-Model-THRILL MB / Wipro-Model-Define / Featherlite- Only

Model-Halix MB / Merrifare-Model-Wau MB)

11 Providing and supplying Medium back chair for Staff Visitor as per approved 85.00 NO 8222.50 Rs. Eight Thousand

brand and model. (Brand and model as per HOF-Model-Cati / Godrej-Model- Two Hundred Twenty

Pulse / Wipro-Model-That's It / Featherlite-Model-Amaze Cusion Back / Two & Paise Fifty Only

Merrifare-Model-Nez)

12 Providing and supplying PERFORATED METAL CHAIR,Complete chair should 80.00 NO 1750.87 Rs. One Thousand

be in suitable shape. Rates to be inclusive of all taxes and free delivery at Seven Hundred Fifty &

site. Selection of chair should be as approved by engineer in-charge. Paise Eighty Seven

13 Side Table: Size: (0.91 x 0.46 x 0.69) 15.00 NO 12056.21 Rs. Twelve Thousand

Providing and fixing 25mm thick (19mm+6mm) plywood laminated on top Fifty Six & Paise

and bottom with 6mm thick plywood at backside in approved laminate Twenty One Only

shade with exterior side 1mm and interior side 0.8mm approved laminate.

Drawer unit box (measurement shown in drawing) with wooden bidding

patti, lock,handle and telescopic channel should be made from 19mm

plywood with 1mm outside and 0.8mm inside laminate. The Rate includes

the cost of shutter with Magnet, Multiple drawer lock, S.S. Legs (75mm

height) in bottom, Auto hinges. Including all materials and labour etc.

complete as per detail drawing and instruction of engineer-in charge.The

necessary hardware fitting shall be as per approved make list of GSPHCL.

Item No. Description of Item Total Qty. Unit Estimate Estimate Rate Rs. in Amount

Rate Rs. Words Rs.Ps

14 Conference Table 29.00 Smt 9389.32 Rs. Nine Thousand

Providing and fixing 25mm (19mm+6mm) thick (plywood, interior Three Hundred Eighty

Nine & Paise Thirty

grade/MDF/with post forming laminated top in approved shed) with

bottom 0.075m. 19mm ply patta for edge thickness and edges should be

cover with 1mm Outside & 0.8mm interier side approved laminate with

38mm (19mm+19mm) thick vertical legs made by plywood with exterior

side with laminated finish and 8mm thick plain glass fixed in center of the

apron area as per detail drawing, footrest should be from 19mm plywood

with laminated finish in approved shade. Including all materials and labour,

all edges should be laminated etc. complete as per detail drawing and

instruction of engineer in charge and Architect.

15 Providing and Fixing Stainless Steel ( 304 Grade ) Matt / Satin Finish S.S 8.00 NO 10051.00 Rs. Ten Thousand Fifty

Rectangle LAB TABLE Size 1.18mmX750mmX 750mm , completed as per

detailed drawing & as directed by engineer in charge. Rate are inclusive of

all material, labour, taxes & polishing.

16 Providing and Fixing Stainless Steel ( 304 Grade ) Matt / Satin Finish S.S 7.00 NO 17229.00 Rs. Seventeen

Rectangle DINING TABLE Of Size 1800mmX750mmX 750mm , completed as

Hundred Twenty Nine

per detailed drawing & as directed by engineer in charge. Rate are inclusive Only

of all material, labour, taxes & polishing.

Item No. Description of Item Total Qty. Unit Estimate Estimate Rate Rs. in Amount

Rate Rs. Words Rs.Ps

17 Low Ht. Storage (0.46 Depth) 15.00 smt 9954.86 Rs. Nine Thousand

Nine Hundred Fifty

Providing and fixing low height storage with 25mm thick plywood

Four & Paise Eighty Six

board.Top and shutter made from 19mm thick plywood in approved shade Only

with vertical and horizontal surface 19mm plywood with inside 0.8mm and

outside 1mm laminate finish with 6mm thick Plywood & 0.8mm Laminated

Finished at Backside. All teakwood bidding should be finished by melamine

polish with support of S.S. legs, lock, handle, etc. complete. Including all

materials and labour etc. complete as per detail drawing and instruction of

engineer-in charge.necessary hardware fitting shall be as per aprroved

make list of GSPHCL.

18 Full Ht. Storage (0.46 Depth) 24.00 Smt 10502.78 Rs. Ten Thousand Five

Providing and fixing Full height storage with 19mm thick plywood Hundred Two & Paise

board.Top, Bottom, Sides and shutter made from 19mm thick plywood in Seventy Eight Only

approved shade with vertical and horizontal surface 19mm plywood with

inside 0.8mm and outside 1mm laminate finish with 6mm thick Plywood &

0.8mm Laminated Finished at Backside. All teakwood bidding should be

finished by melamine polish with support of S.S. legs, lock, handle, etc.

complete. Including all materials and labour etc. complete as per detail

drawing and instruction of engineer-in charge.necessary hardware fitting

shall be as per aprroved make list of GSPHCL.

Item No. Description of Item Total Qty. Unit Estimate Estimate Rate Rs. in Amount

Rate Rs. Words Rs.Ps

19 Single Bed with Matress 7.00 No 11666.01 Rs. Eleven Thousand

Providing and supplying Single Bed (0.90 X 2.0m) made from teakwood Six Hundred Sixty Six &

75x75mm leg support with 50x38mm member as per design with 18mm Paise One Only

thick plywood with 1.0mm laminate finish on top and 0.8mm thick laminate

finish on bottom area on wooden frame and 18mm thick 150mm wide

plywood patta on three side finished with both side 1.0mm laminate and

back side having 330mm wide plywood patta finished with both side

1.0mm laminate and 2mm thick pvc edge banding of all expose sided and

legs & frame to be melamine polish etc. complete. Including supplying

100mm thick matress of U form, density 50Kg/m2 with soft seat on top of

matress etc. complete as per instruction of engineer in charge. (Bed with

20 Roller Blind Providing and fixing Roller Blind curtain fixed on window level 95.00 Smt 2474.80 Rs. Two Thousand

on wooden batten and curtain lift with cotton thin rope, design and colour Four Hundred Seventy

as per instruction by engineer – in – Charge with necessary hardware Four & Paise Eighty

fitting, material and labour etc complete. Only

21 Providing and fixing of Dice made of 18mm thick IS 303 MR grade plywood 1.00 NO 10052.86 Rs. Ten Thousand Fifty

and shall be finished with 1.0mm thick laminate on external side. The rate Two & Paise Eighty Six

shall be inclusive of all material, labour, accessories etc like PVC edge Only

banding, lipping, Gola, mouldings. The contractor shall submit the sample

of material (s) to the Engineer-in-charge for the approval of the same.

Size- 750 L X 600 W x 1000 H

22 MS Sloted Angle Rack 16.00 NO 5558.13 Rs. Five Thousand Five

Providing & Supplying M.S. Sloted Angle Rack of Size 1200 X 600 X 1950 Hundred Fifty Eight &

mm Height with 5 Equal Part of Total Height of Rack etc Complete as per Paise Thirteen Only

Instruction by Engineer in Charge & Architect.

Item No. Description of Item Total Qty. Unit Estimate Estimate Rate Rs. in Amount

Rate Rs. Words Rs.Ps

23 Full Ht. Partition (Wooden) 133.00 Smt 3579.17 Rs. Three Thousand

Providing and fixing full and low height partition and glass partition with Five Hundred Seventy

installation upto ceiling or beam bottom as per drawing and framing the Nine & Paise

skeleton (plywood frame structure) with 19mm + 19mm thick vertical and Seventeen Only

horizontal plywood (patti) both side cover with 6mm + 6mm for grooving as

per design. Fixing properly without any air gap and finishing with selected

1mm laminate. Before installation, make hole/face plate for conduit pipes

of electrical / networking cables with openable stud from partition

Including all materials and labour etc. complete as per detail drawing and

instruction of engineer-in charge.

24 Accoustic laminate wall Paneling Wall paneling on wall for electrical 68.00 Smt 5296.32 Rs. Five Thousand Two

conducting and net wiring etc. made by 18mm framing having fixed 50mm Hundred Ninety Six &

thick twiga make glasswool fixed between the framing surface. 12mm Paise Thirty Two Only

plywood fixed on top of the framing, 1mm thick approved laminate on

surfaces openable facility with necessary hardware as per design and

instruction as directed by site in-charge or architect

25 Veneer wall Paneling Wall paneling on wall made by 18mm frame and 90.00 Smt 6084.41 Rs. Six Thousand

12mm plywood surface on frame. 4mm thick approved veneer fixed on Eighty Four & Paise

surfaces of the plywood with necessary hardware required. All veneer Forty One Only

surface should be finished by monocoat polish as per drawing and

instruction as directed by site in-charge or architect.

Item No. Description of Item Total Qty. Unit Estimate Estimate Rate Rs. in Amount

Rate Rs. Words Rs.Ps

26 Gypsum False Ceiling Providing and fixing gypsum board ceiling as per 195.00 Smt 1310.83 Rs. One Thousand

manufactures' specifications incl. acrylic paint. Fixing of suspended gypsum Three Hundred Ten &

plain false ceiling by using standard company section (GYPSTEEL ULTRA), Paise Eighty Three

which includes providing and fixing G.I. parameter channels of size 20 X 28 Only

X 30 X 0.55 mm thick having one flange of 20 mm and another flange of

nylon sleeves and screws at 610 mm center. Then suspending G.I

intermediate channels of size 15 X 45 X 15mm, 0.9 mm thick fixed with two

flanges of 15 mm each from the sophist at 1220 mm center with ceiling

angle of width 25 mm x 10 mm x 0.55 mm thick fixed to sophist with G.I.

cleat and steel expansion fasteners. Ceiling section of 0.55 mm. thickness

having knurled web of 51 mm. and two flanges of 26 mm each with lips of

10.5 mm. area then fixed to the intermediate channel with the help of

connecting clips and in direction perpendicular to the intermediated

channel at 457 mm. center 12.5 mm tapered edge gypsum board

(conforming to is 2095-1982) is thnned copper neutral link, tinned copper

earth bar, din bar, detachable gland p

Item No. Description of Item Total Qty. Unit Estimate Estimate Rate Rs. in Amount

Rate Rs. Words Rs.Ps

Screws fixing is done mechanically either with screwdriver or drilling

machine with suitable attachment. Standard company manufactured

section (GYPSTEEL ULTRA) should be used for the entire framework. Finally

the board are to be jointed and finished, so as to have a flush look which

includes filling and finishing the tapered and square edges of the boards

with jointing compound, paper tape and two coats of primer suitable for

Gyp-board (as per recommended practices of India Gyproc - Saint Gobain

make). (also including application of primer and preparing surface even &

sand papered smooth with lapi, astar...) Including three coats with plastic

emulsion paint of approved brand & manufacture. Including all materials

and labour etc. complete as per detail drawing and instruction of engineer-

27 Cupboard shutter Providing and fixing Cupboard shutter with frame of 16.00 Smt 6271.68 Rs. Six Thousand Two

made from 18mm plywood post forming in approved shade with inside Hundred Seventy One

0.8mm thick laminate with pvc edge fixed on exposed edge of the plywood. & Paise Sixty Eight

Shutter made from 18mm plywood post forming in approved shade with Only

inside 0.8mm and outside 1mm laminate finish. All hardware material such

as hinges, lock, handle, magnet, pvc louvers grill etc. complete. Including all

materials and labour etc. complete as per detail drawing and instruction of

engineer-in charge.

28 LUGGAGE RACK WITH SS ROD AND SHOE RACK STORAGE AT BOTTOM 4.00 NO 15000.00 Rs. Fifteen Thousand

Providing, Supplying and fixing LUGGAGE RACK WITH SS ROD AND SHOE Only

RACK STORAGE AT BOTTOM of size 975 x 580 x 650 mm as approved by

Architect with CARCASS Colour White & Front Colour - Laminate etc

complete with all Labours & Materials Including All Fixtures & Fasteners &

Engineer In Charge.

Item No. Description of Item Total Qty. Unit Estimate Estimate Rate Rs. in Amount

Rate Rs. Words Rs.Ps

29 Providing & Fixing Stainless Steel Logo Size 28" x 21.88" Printed on 3 M 2.00 NO 49946.21 Rs. Forty Nine

Vinayl with SS Plate size of 5 ft x 3 ft & 1 mm thick having chamfer edge. Thousand Nine

Rates are inclusive of all labour, scaffolding, material, finishing, Fittings etc Hundred Forty Six &

complete as per drawing or as directed by Engineer In Charge. Paise Twenty One

Total Civil Amount=

Item No. Description of Item Total Qty. Unit Estimate Estimate Rate Rs. in Amount

Rate Rs. Words Rs.Ps

(B-ELECTRIC ITEM)

Providing & Erecting Point wiring with 1.1 KV grade ISI marked

2 X 1.5 sq. mm copper PVC insulted FRLS wire with 1.5 sq.

mm (green) copper PVC insulated FRLS wire for earth

continuity in FIA approved ISI mark medium class white colour

20/25 mm dia. embossed rigid PVC pipe with PVC fitting fixed

with adhesive solution erected on/in Brick Wall / slab along

with continuous G.I. fish wire to draw wires and laid in approved

manner zari for PVC pipe and boxes shall be filled with cement

mortar and finishing the surface to match the wall / ceiling

complete with approved make 5/6 Amp. ISI make modular type RS: Five

30 switch and accessories mounted in 20 G. G.I. company 12.00 Point 505.00 Hundred Five

fabricated metallic box covered with appropriate front plate only

modules erected flushed with wall / ceiling with necessary

modular lamp holder / modular ceiling rose / HD Connector

mm deep GI box if require ( make & model approved by EIC

and matching colour with switches accessories) as directed for

concealed wiring. For separate Point (with 6 Amp. Switch &

3/5 pin socket both having ISI mark) Cat.-III

Providing following type of Modular Type Accessories mounted RS: One

with 20 G company fabricated metalic box, single mounting Hundred Fifty Nine

base frame covered with textured / metallic front plate, modules only

31A erected with necessary connection. As desired by Engineer in 12.00 Each 159.00

charge.Two pin / RJ-11Telephone Socket (For One Gang) Cat

Item No. Description of Item Total Qty. Unit Estimate Estimate Rate Rs. in Amount

Rate Rs. Words Rs.Ps

Blank Plate Single. Cat.-III RS: Twenty

31B 50.00 Each 25.00 Five only

Modem Jack for Computer Open RJ-45 Cat III RS: One

31C 12.00 Each 159.00 Hundred Fifty Nine

Providing & erecting Switch board for Computer or electric RS: One

apparatus consisting of following items in single board erected Thousand One

on 20 G. G.I. company fabricated metallic box erected with Hundred Twenty

appropriate front plate modules erected flushed with wall as Two only

directed. 1 no. 6/16 Amp. universal Socket, 1 no. 13 Amp.

international socket, 2 nos. 16 Amp. indicator switch, 2 nos.

Amp. Switch & 2 nos. 6 Amp. 5 pin Plug. For Computer power

Supply board. Cat.-III

Providing and erecting Medium Class FIA approved and ISI RS: Twenty

mark white colour (embossed) RIGID PVC PIPES of following Four only

size complete erected with necessary PVC fittings & Junction

boxes fixed with adhesive solution & clamps on / in wall / ceiling

33A along with continuous fish wire to draw mains with necessary 100.00 Mtr. 24.00

fittings and junction boxes for following dia. (a) 20 mm. dia.

For 25 mm. dia. RS: Thirty

For 32 MM Dia RS: Fifty Four

Item No. Description of Item Total Qty. Unit Estimate Estimate Rate Rs. in Amount

Rate Rs. Words Rs.Ps

Providing & Erecting Mains with FRLS PVC Insulated wire ISI RS: Eighty

marked 1.1 KV grade with FIA approved ISI mark medium Two only

class 20/25/32 mm dia. embossed rigid PVC pipe with PVC

fitting fixed with adhesive solution to be erected on/in brick wall

/ slab along with continuous G. I. fish wire to draw mains laid in

approved manner with plastering by cement mortar & finishing

the surface to match the wall / ceiling complete with FRLS PVC

insulated wire for earth continuity. (Approved ISI make only)

34 (Conductor resistance should be as per IS:8130/1984 )For 2 x 150.00 Mtr. 82.00

2.5 sq.mm. FRLS copper multi stranded conductor mains with

1.5 sq.mm. FRLS copper multi stranded conductor for earthing

as per standard colour code. (with 20/25 mm dia. PVC pipe)

[Wire must be having box packing] (Conductor resistance

should be as per IS:8130/1984 )(For Computer Point)

Providing & fixing 25 mm. dia. PVC insulated G.I. corrugated RS: Thirty

Flexible pipe with necessary socket, PVC bushes saddle, Seven only

35 Check-nuts etc. complete of following sizes. 20.00 Mtr. 37.00

Item No. Description of Item Total Qty. Unit Estimate Estimate Rate Rs. in Amount

Rate Rs. Words Rs.Ps

Providing ad erecting approved make single phase Double Door metal clad RS: Five

D.B. as per relevant indian standards ammended upto date. Thousand Eight

Supplying and fixing following way single phase MCB distrubution board of

company fabricated IK 10 certificate with sheet box with powder coated

Hundred Sixty Eight

inside and outside after apply seven tank chemical process of MS sheet only

cover complete with suitable integral single piece construction tinned copper

busbar and link with all necessary interconnection and with necessary size

MS frame for mounting MCBDB. Manufacturer must be provided (1) IP

and as per IS:8623-1 & 3, IEC 61439-1 & 3 having D type PU gasket. (2)

Seven tank Powder coating Certificate (3) Tinned Copper/Brass make

neutral & Earthing link with isolation & Protecting Cover for 240 Volts on

surface / recess complete with loose wire box, terminal connectors for all

incoming and outgoing circuits, with suitable size FRLS PVC insulated

copper conductor up to terminal blocks and internal connection, tinned

coppper bus bar, 1 no. tinned copper neutral link, tinned copper earth bar, din

bar, detachable gland plate, interconnections, powder painted including

Single phase incoming and horizontal single phase outgoing. For 16 Way

MCBDB: Including 40 Amp. 30 mA double pole ELCB (ELCB confirming to

IS:12640/1988 having sensitivity of 30 mA and breaking capacity of 10 KA),

MCB 40 Amp. double pole switch (C curve confirms to IS:8828 having

breaking capacity of 10 KA) and S.P. MCB of rating 6 to 32 Amp. with NL

suitable to operate on 240 Volt A.C. power. (6 Amp:- 4 Nos., 16 Amp:- 4 Nos.

& 25 Amp: 4 Nos.) Cat.-III

Item No. Description of Item Total Qty. Unit Estimate Estimate Rate Rs. in Amount

Rate Rs. Words Rs.Ps

(The DBs should be used of same company of MCB / ELCB to

be used) (MCBDB must be erected in line & level with spirit

level and finish the external edge with box cutting plaster)

(Same colour MCB(SP/DP) should be used as same as

MCBDB) [Including Necessary numbering / marking on box

done with red colour radium sticker as per site requirement and

instructions given by EIC on site. Font / number size given by

EIC on site as per requirement]

Supplying and laying UPVC cable trunking system comprising RS: Two

unplasticised polyvinyl, chloride rigid material with ignition free Hundred Seventy

& flame proof confirming BS with necessary end caps Internal Five only

and external bend, flat bends, coupler, tee etc. All necessary

accessories and measuring of following sizes. [1] 75 mm x

mm trunking (MK / Legrand/OBO Make Only)

100 mm x 50 mm trunking (MK / Legrand/OBO Make Only) RS: Four

37B 30.00 Mtr. 424.00 Hundred Twenty

SITC of specified make Cat - 6 voice /data cable to be done RS: Forty

in prelaid PVC pipe / raceway , but without the cost of raceway Seven only

or pipe ( the wire is to be drawn from MFD/ JB to outlet point)

(a) CAT - 6-Y Colour ( For Voice Cabling ) & X -Colour(For

38 Computer Data Cable ) . 250.00 Mtr. 47.00

( Molex/Avaya/Systimax/Legrand make)

Item No. Description of Item Total Qty. Unit Estimate Estimate Rate Rs. in Amount

Rate Rs. Words Rs.Ps

SITC of Layer 2 Switch, Shall have 24-port 1000 BASE-T RS: Fifteen

(RJ45) PoE+ with additional 2-port 1GBASE-X (SFP+), 190W Thousand Two

PoE Budget with single power supply unit, shall have minimum Hundred Forty

52Gbps non-blocking fabric across 28 ports, Switch must have Seven only

advance feature like VLAN Tagging, Voice VLAN, LAGs, LACP,

IGMP Snooping, Multicast VLAN Registration, ACLs, LLDP,

39 SNMP, QOS. Switch’s Operating System should be tested 1.00 Each 15247.00

under Common Safety Criteria Certification & as per attached

details specification. (Make:- Netgear/Cisco Enterprise/HP

Item No. Description of Item Total Qty. Unit Estimate Estimate Rate Rs. in Amount

Rate Rs. Words Rs.Ps

Supply, Installation, testing and commissioning of 24 port Cat 6 RS: Four

19" Toolless Patch Panel ( fully loaded) enable all possible Thousand Three

combinations of the various types of cable mounted on the Hundred Fifty Seven

same panel by using various toolless connector only

blocks/modules. Have a metal structure enabling them to be

durably fixed to the uprights of the 19” chassis and assuring

automatic grounding between toolless RJ-45 connectors, the

panel, and the 19” uprights of the enclosure. Include rear cable

support with plastic cable guides to hold cable without need for

cable ties. Include quick mounting system to mount the panel

40 into the 19” rails without use of cage-nuts. These may be used 1.00 Each 4357.00

to secure the connections of wifi access points, IP cameras,

servers, or other critical devices. Front Removal IO's option for

maintenance and trouble shooting with 6 Different Colours

Labels for Labelling & Identification of Individual Ports. & as per

attached details specification.

(CAT 6 ) ( Make:- Molex,Commscope Systemax/

Legrand/Panduit)

SITC of CAT6 UTP 24AWG PATCH CORD:2M,Plug 30U' Snag RS: One

41 less(Molex/Avaya/Systimax/Legrand make) 12.00 Each 199.00 Hundred Ninty Nine

SITC of CAT6 UTP 24AWG PATCH CORD:1M,Plug 30U' Snag RS: One

42 lessMolex/Avaya/Systimax/Legrand make) 12.00 Each 155.00 Hundred Fifty Five

Item No. Description of Item Total Qty. Unit Estimate Estimate Rate Rs. in Amount

Rate Rs. Words Rs.Ps

Supply and installation of 9U steel rack for installing 4 nos. RS: Eleven

Ethernate switches/Hubs. The Rack should be fully enclosed Thousand Four

steel housing fabricated with 14 SWG sheet and powder coated Hundred Forty One

with glass doors and having wire management systems. The only

rate includes the Exhaust Fan, 2 nos. 4 socket and 1 switch

power strip and all the wiring in the rack.

(Rittal,Valrack,APC,Legrand make)

Supply, Installation testing and commissioning of 16 Gauge RS: Seven

M.S. Powder coated floor raceway Access outlet / service Hundred Forty Nine

junction box with 16 Gauge M.S. Powder coated Cover plate only

with duct entry 25 mm / 38 mm size having epoxy powder

coated trap lead with corrosion & rust free with adjustable

levelling screw of following size. [a] 300 mm x 300 mm x

Supply, Installation testing and commissioning of 16 Gauge RS: Six

M.S. Powder coated floor raceway Access outlet / service Hundred Seventy

junction box with 16 Gauge Cover plate with duct entry 25 mm Two only

/ 38 mm size having epoxy powder coated trap lead with

45 corrosion & rust free with adjustable levelling screw of following 10.00 Each 672.00

size. [a] 150 mm x 150 mm x 50 mm depth

Item No. Description of Item Total Qty. Unit Estimate Estimate Rate Rs. in Amount

Rate Rs. Words Rs.Ps

Supplying and erecting approved make online Un-interruptible RS: Twenty Nine

Power Supply system comprising flat cum-boost charger with Thousand Three

IGBT base rectifier & Inverter & sealed maintenance free SMF Hundred Twenty

batteries. The charger having operating capacity for input 160- Three only

270V AC & inverter having output 230V,50 Hz Ac with

load power factor with battery, over/under voltage output with

46 over load & short circuit protection equipment. The system 1.00 Each 29323.00

housed in CRC sheet duly powder coated paint with following

power backup.with MS painted batteries stand, 10% Overload

capacity for momentary load. (A) 1 KVA with 1Hr Backup

Total Electrical Amount=

Total CIVIL+ Electrical Amount=

Siganature Of Contractor Executive Engineer

G.S.P.H.C.Ltd.,