Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹11.8 CrAccepted-AOC NUAPADA KHETRAJPUR SAMBALPUR 768003 DIST SAMBALPUR 768003 ODISHA | SAMBALPUR | SAMBALPUR | ODISHA | 768003 | ₹11.8 Cr Quoted ₹11.7 Cr | L1 | Accepted-AOC Awarded being the L1 bidder |
| 2 | L2₹12.3 CrRejected-Finance AT OPM COLONY BRAJRAJNAGAR DIST JHARSUGUDA ODISHA 768216 | JHARSUGUDA | ODISHA | 768216 | ₹12.3 Cr | L2 | Rejected-Finance Rejected being the L2 bidder |
Updated dates
Tender Value
₹14.1 Cr
EMD Value
₹17.6 L
Closing Date
23 Jan 2026, 5:00 pmClosed
Sri Jyotirmay Sinha, GM(Civil-Welfare), MCL
MCL.Jagriti Vihar. Burla. Dist.-Sambalpur. PIN-768020. Odisha. Contact No.9437145678.
Comprehensive Day to Day maintenance work of Anand Vihar Township (Including residential buildings, non-residential buildings, service buildings and welfare office buildings etc. at, MCL HQ (for two years)
2026_MCL_350464_1
MCL/Samb/Civil-Wel/e Tender/25-26/33 dt 29/12/2025
Open Tender
Miscellaneous Services
730 days
Anand Vihar
As per Tender Document
5 documents required · 5 mandatory
₹17.6 L
1 Apr 2026
2 Jan 2026
27 Jan 2026
2 Jan 2026
23 Jan 2026
3 Jan 2026
2 Jan 2026 - 12 Jan 2026
PART A - WITH ITC AVAILABILITY
Up keeping of inside office/ service / welfare buildings including: a) Cleaning of floors by brooming and mopping, walls ceiling, partitions, chairs, tables, almirahs, staircases, verandahs, balconies, window glass panes, small drain adjoining plinth protection etc. once in a day in the office building daily in all working days. (b) Cleaning of bathroom / toilets once in a day with water, detergent, phenyl etc. daily in working days inclusive of Cost of detergents and other toiletaries as per the direction of Engineer-In-Charge. (Minimum 09 Unskilled Labour to be provided on daily basis)
PART B - UPKEEPING (WITHOUT ITC AVAILABILITY)
ESSENTIAL SERVICES :Upkeeping ot residential quarters in the township including cleaning of bathrooms, staircase, courtyard, garage, parking space, premises and surrounding areas including collection of garbage and disposal to the dustbins by engaging sufficient numbers of manpower including cost of all necessary tools and supervision charges etc. allcomplete as per the direction of ElC. A-Type Quarter (Minimum 17 Unskilled Labour to be provided on daily basis)
Upkeeping ot residential quarters in the township including cleaning of bathrooms, staircase, courtyard, garage, parking space, premises and surrounding areas including collection of garbage and disposal to the dustbins by engaging sufficient numbers of manpower including cost of all necessary tools and supervision charges etc. allcomplete as per the direction of ElC. B-Type Quarter (Minimum 12 Unskilled Labour to be provided on daily basis)
Upkeeping ot residential quarters in the township including cleaning of bathrooms, staircase, courtyard, garage, parking space, premises and surrounding areas including collection of garbage and disposal to the dustbins by engaging sufficient numbers of manpower including cost of all necessary tools and supervision charges etc. allcomplete as per the direction of ElC. C-Type Quarter (Minimum 04 unskilled lobour to be provided on daily basis)
Up keeping of inside office/ service / welfare buildings including: a) Cleaning of floors by brooming and mopping, walls ceiling, partitions, chairs, tables, almirahs, staircases, verandahs, balconies, window glass panes, small drain adjoining plinth protection etc. once in a day in the office building daily in all working days. (b) Cleaning of bathroom / toilets once in a day with water, detergent, phenyl etc. daily in working days inclusive of Cost of detergents and other toiletaries as per the direction of Engineer-In-Charge. (Minimum 11 Unskilled Labour to be provided on daily basis)
Upkeeping of inside office/hospital building services including: (a) Cleaning of floors by brooming and mopping walls, ceilings, partitions, staircases, verandahs, balconies, window glass panes, small drains, etc., along with cleaning of chairs, tables, almirahs, and other furniture using suitable cleaning agents and tools. (b) Disinfection of all high-contact surfaces in a day in working days using approved disinfectants. (c) Cleaning of the entire building daily with water, detergent, phenyl, etc.as per the direction of the Engineer-in-Charge.(Black phenyls , white phenyls ,harpic and necessary disinfectants to be paid separately) (d) Special hospital cleaning tasks such as immediate cleaning and disinfection of areas affected by vomiting of patients, removal and safe disposal of foreign materials (e.g., spilled medicines, body fluids, or medical waste) in compliance with infection-control protocols. (e):All kinds of miscellaneous works /taskes to keep hospital hygenic , neat and clean and other works as per direction of Medical Officer . (Manpower shall be engaged as per instruction of EIC i.e in 1st shift -4 unskilled labour, 2nd shift -3 unskilled labour and in 3rd shift -2 unskilled labour . )
Upkeeping of inside office/hospital building services including: (a) Cleaning of floors by brooming and mopping walls, ceilings, partitions, staircases, verandahs, balconies, window glass panes, small drains, etc., along with cleaning of chairs, tables, almirahs, and other furniture using suitable cleaning agents and tools. (b) Disinfection of all high-contact surfaces in a day in working days using approved disinfectants. (c) Cleaning of the entire building daily with water, detergent, phenyl, etc.as per the direction of the Engineer-in-Charge.(Black phenyls , white phenyls ,harpic and necessary disinfectants to be paid separately) (d) Special hospital cleaning tasks such as immediate cleaning and disinfection of areas affected by vomiting of patients, removal and safe disposal of foreign materials (e.g., spilled medicines, body fluids, or medical waste) in compliance with infection-control protocols. (e):All kinds of miscellaneous works /taskes to keep hospital hygenic , neat and clean and other works as per direction of Medical Officer . (Manpower shall be engaged as per instruction of EIC i.e in 1st shift -1 unskilled labour, 2nd shift -1 unskilled labour and in 3rd shift -1 unskilled labour . )
Removal of chokage / blockage of inspection chambers by removing silt, sludge and other foreign materials and disposal of the same to the nearest dustbins etc. Complete as per the direction of engineer-In-Charge.
Removal of chokage / blockage of sewer lines by removing silt, sludge and other foreign materials and disposal of the same to the nearest dustbins etc. Complete as per the direction of engineer-In-Charge.
Cleaning of Drains without siltation or sludge deposition: Open Surface drain above 250 mm width.
Cleaning of Drains without siltation or sludge deposition: Open Surface drain up to 250 mm width.
Cleaning of drains including removal of earth/ slush/ mud/ silt etc. from drains including disposal of the same within a lead of 50 metres.
Upkeeping or cleaning of concrete pavement/ Black topped roads (Both dry and Wet debris) by deploying Mechanical Brooming Machine and disposal collected debris/ waste at designated places of state Govt. including Transporattion ,labour cost etc as per instruction of EIC(Diesel to be paid separatley).The work shall be carried out by mechanical means only by mechanical brooming machine with it's own dust collector container capacity (including Labour cost,Maintenance cost and hire cost also.) Note-:a) In case of partial work done ,propertionate rate will be deducted as per the estimate.b): In case of breakdown of machine contractor shall arrange alternative machine.c),: Labour payments must be done through Nationalised bank only.d): All kinds of tools shall be provided by the agency also. e): The machine must have clean both dry and wet debris.f): It will be the responsibility of the contractor to maintain all statutory documents of mechanical road sweeper machine e.g RC book, Fitness Certificate, pollution certificate, road tax clearance, Latest First Party Insurance (comprehensive policy) paid up to date. Goods and Services Tax Registration (if required), valid driving license of the assigned driver, as required under Motor vehicle Act and other Govt. Acts/ registration.g): The machine must have provision of water spraying facility.(Payment will be done separately likely the cost of fuel will be reimbursed @10.29 ltr/hr , contractor has to deposite the fuel slip,) A)Minimum sweeping capacity -30,000 SQM PER HOUR.,B):Minimum dust container capacity - 5 CUM.,C):Collector Mechanism : Vaccum suction type / Mechanical Gathering Type(As per site requirement) D):Water Tank Capacity (Ltrs) : 600 (minimum),E):Two chemical fire extinguishers of minimum 2 kg shall be provided which are capable of dealing with POL fire,F):Water Tank Capacity (Ltrs) : 600 (minimum),G):Sweeping Speed : upto 10 km/hr (min),H):Size of Debris it should handle : 100 mm in all three dimensions,I):Operational Conditions : Both Dry & Wet,J):Brush Diameter (mm) : a. Main broom : 400 mm (min) b. Side broom : 800 mm (min) , K):No. of Centre Brush in Sweeping System : 1 (minimum),L):No. of Side Brush in Sweeping System : 2 (minimum),M):Spray Location : On Side Brush & Front
Providing fuel (Diesel ) for running of mechanical sweeping machine @10.29 ltr/ hour .The payment of diesel to be paid on hourly basis @ 10.29 ltr/hour. The contractor has to deposit the fuel slip. The payment will be done based on the actual running time.
cleaning and brooming of floor areas like chequered tiles, paver block, IPS floors like concrete pavement/ Black topped roads, excluding coaltransport road by brooming and disposal of collected debris/ waste at collection pit/ dustbins or at specified locations within a lead of 50 metres including all tools & plants like spade, basket, brooms with handle stick complete as per the direction of Engineer-In-Charge.(All unaccesed area to be cleaned by mannually) (11 Unskilled labour to be provided on daily basis)
Supplying and providing Soap based multi-use cleanser and deodorant (BENGAL CIIEMICALS tiger brand white phenyl or its equivalent approved brand) in sealed container(s) of 500ml capacity and distributing the same to all residential quarter(s) and service building(s) as directed by Engineer-in-Charge.
Supply and providing of black phenyl (BENGAL CHEMICAL Lamp brand) or its equivalent approved brand in sealed container of 450 ml capacity as per direction of Engineer-in-charge. .
Supply and providing of bleaching powder conforming to BIS specifications in sealed bags of 25 kg. capacity as and when required as directed by Engineer-in-charge.
Collection of garbage from different places of Colony and disposal of the same at a suitable place as earmarked by Municipality/local authorities by suitable mechanical arrangement (Tractor) including loading, unloading etc. Complete with all leads as per instruction of Engineer-in-Charge. (Tractor of 3.00 Cum capacity to be engaged at least twice in a week and no garbage shall be dumped in colony premises. Tractor trip in colony premises should be duly authenticated by concerned TA authorities. Garbage shall be covered properly and tied in order to avoid any slippage during transit). Note: Hire charge of tractor is inclusive of lead of 10 KM. The lead may vary as per the requirement.
Cleaning of septic tank with removal of sludge night soil etc complete and putting the waste materials by digging pit within a distance of 1km and coverring the same as per the instruction of Engg-in-charge
Disposal of dead animals like street dog,pigs,cat etc. as an when required including digging of pits and buring the same as per instrution of engineer in charge
Disposal of dead animals like cow,ox,buffalow etc. as an when required including digginhg of pits and buring the same as per instrution of engineer in charge
Deployment of two nos unskilled manpower for cleaning of toilet, room, chhajas , roof and surrounding area for newly alloted quarters including the cost of tools and materials required for cleaning as per instruction of the EIC.
Cleaning of over head water tank (HDPE / Masonary) by applying bleaching powder, washing the tank neatly as per instruction of EIC (Upto 2000 Litre capacity) for Two Year (Twice in a year)
Cleaning and uprooting of trees/plants/vegetation/debris on the building including uprooting of rank vegetation on the building blocks, water tanks,chajja,kitchen/sanitary pipes,walls etc. including repairing plastering and removal of the rubbish/debris and disposal up to nearest dustbin with all lead and lift as per direction of EIC
Carrying of alum, bleaching powder, lime from the store, preparing the alum, bleaching powder and lime solution in proportion as per direction given and pouring the solution to the water in treatment plant, cleaning the filter bed during backwash, operating the valves and other misc. job like assisting the pump operator, filter in operation of pump, gland packing, removing and setting of pumps etc. as and when required as per direction of Engineer-in-charge.{01 labourer per shift for 03 shifts in a day & 02 labourers in General shift per day i.e. 05 ( five) labourers per day to be provided.
Cleaning of raw water tank/sedimentation tank, clear water tank, clarifier & it's channel ,reservoir by using lime powder/Bleaching powder (to be provided by departmentally) as per direction of EIC (scope of work frequency of cleaning of different tanks will be covered in 4 operations in a month.labour required for each operation is 4 nos unskilled labour . Structures to be cleanrd as per direction of EIC.The following tanks to cleaned (i) Raw water tank no-2 Nos (ii)Clear water tank-1 No (iii)Clarifier & attached drains(iv) Ground water tank.
Marking of ground with lime at anand vihar play field withpowder lime , re-lining as directed by EIC(excluding the cost of lime)
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : Along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / sqm of the vertical surface of the substructure to a depth of 300mm including excavation channel along the wall & rodding etc. complete:: With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration
Treatment of existing masonry using chemical emulsion @ one litre per hole at 300 mm interval including drilling holes at 45 degree and plugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to the full depth of the hole : With Chlorpyriphos/Lindane E.C. 20% with 1% concentration
Supplying and providing harpic solution or its equivalent approved brand for cleaning of toiletes as and when required basis as directed by Engineer-in-Charge. (500 ml bottle)
Supply of Odonil as per direction of EIC
Supply of Napthalene Ball as per direction of EIC
Shifting of all necessary items and miscellaneous items as and when required as per instruction of EIC.
Maintenance Workers: Labour charges including tools and plants for day to day maintenance work like brick work, plastering, flooring and other petty jobs as and when required on daily basis by deploying masons. Beldar /coolie in residential quarters of Anand Vihar Colony (Materials to be used in this item are to be paid separately) as per instruction of Engineer-in-charge. (2 Skilled and 2 unskilled worker per day)
Day to day maintenance of, water supply net work and plumbing work etc. with all labour cost but ercluding cost of materials as per instruction of Engineer lncharge.(3 Skilled and 3 unskilled worker per day)
Labour charges of deploying 03 (three) Skilled Carpenter and 03 (three) unskilled helper for day to day maintenance works related with Carpentray works as per instruction of Engineer-in-charge
Labour charges for day to day maintenance works related with welding works like welding of hinges, welding of flats in window grills and other petty jobs related with welding works as and when required by deploying welder beldar/coolie in residential quarters of Jagruti Vinar colony. (Welding machine, welding rod and electricity is to be provided by the department as per instruction of Engineer-in-charge. (1 Skilled and 1 unskilled worker per day)
Providing Technical assitance /Supervisor for Supervision of work and assiting the dept and having good academic record and knledge of computer etc to prepare report etc and work as per instruction of Engineer-in-Charge (02 highly skilled person per day)
Colouring Work: Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.9 kg/10 sqm)
Finishing walls with Acrylic Smooth exterior paint with required shade Old work (Two or more coats applied @ 1.67 ltr/10 sqm )on existing cement paint surface
Distempering with 1st quality acrylic distemper (Ready mix) having VoC content less than 50 grams/ litre of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour : old work (one or more coats)
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work
Painting with aluminium paint of approved brand and manufacture to give an even shade:One or more coats on old work
French spirit polishing : Two or more coats on new works including a coat of wood filler
French spirit polishing : One or more coats on old work
Applying priming coat: with ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works
Applying priming coats with primer of approved brand and manufacture, having low VoC (Volatile OrEanic Compound ) content. With ready mixed pink or grey primer on wood work {hard and soft wood) having VOC content less than 50 grams/ litre
Applying priming coats with primer of approved brand and manufacture, having low VoC (Volatile Organic Compound ) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre
white washing with lime to give an even shade : old work (two or more coats)
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping. sand papering and preparing the surface smooth includinB necessary repairs to scratches etc. complete.
Re-lettering with black lapan paint of approved brand and manufacture.
Civil Works:- Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches, drain not exceeding 1.5 m in width as well as 10 sqm on plan including dressing of sides and ramming of bottom, lift up to 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m. (All kinds of soils).
Filling available excavated earth (excluding rock) in trenches, plinth sides of foundation etc. in layers not exceeding 20 cm in depth consolidating each deposited layer by ramming and watering lead up to 50 m and for all lift.
Supplying and filling in plinth with river sand under floors including watering, ramming, consolidation and dressing complete.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
Providing and laying cement concrete of specified grade excluding the cost of centering and shuttering in all works up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
Providing, transporting, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete in shelves, including setting in cement mortar 1:3 (1cement : 3 coarse sand), cost of required centering, shuttering and finishing with neat cement punning on exposed surfaces but , excluding the cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).
Steel Reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete upto plinth level: Thermo-Mechanically Treated bars of grade Fe-500D or more.
Brick work with Fly Ash Brick (230x115x75 mm size) bricks of class designation 10 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)
Brick work with Fly Ash Brick (230x115x75 mm size) bricks of class designation 10 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)
Half brick masonry with Fly Ash Brick (230x115x75 mm size) bricks of class designation 10 in foundations and plinth in : cement mortar 1:4 (1 cement : 4 coarse sand)
12mm cement plaster of mix: 1:6 (1cement : 6 fine sand).
12mm cement plaster of mix: 1:4 (1cement : 4fine sand).
6mm cement plaster of mix 1:3 (1cement : 3 fine sand).
Neat cement punning.
Cement concrete flooring 1:2:4 (1cement : 2coarse sand : 4graded stone aggregates) finished with a floating coat of neat cement including cement slurry but excluding the cost of nosing of steps etc. complete: 40 mm thick with 20 mm nominal size stone aggregates.
Grading roof for water proofing treatment with: Cement concrete 1:2:4 (1cement : 2coarse sand : 4graded stone aggregate 20 mm nominal size)
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacture) of approved make in all colour, shades except burgundy, bottle green, black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12mm thick bed of cement mortar 1:3 (1cement : 3coarse sand) and jointing with grey cement slurry @ 3.3 kg/sqm including pointing in white cement mixed with pigment of matching shade complete.
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such asWhite, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.
Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification..
Providing and laying vitrified floor tiles in diferent sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm
Carriage of material by mechanical transport including loading, unloading and stacking Lime, moorum, building rubbish Lead - 5
Dismantling old plaster or skirting including raking out the joints and cleaning the surface for plaster and disposal of rubbish to the dumping ground within 50 metres lead.
Demolishing cement concrete manually / by mechanical means including disposal of materials within 50m lead as per direction of Engineer-in-charge: Nominal concrete 1:3:6 or richer mix (including equivalent design mix)
Demolishing cement concrete manually / by mechanical means including disposal of materials within 50m lead as per direction of Engineer-in-charge: Nominal concrete 1:4:8 or leaner mix (including equivalent design mix)
Dismantling tile work in floors and roofs laid in cement mortar including stacking of materials within 50m lead: For thickness of tiles 10mm to 25mm.
Making hole for Air Conditioner in wall and disposal of debris, side plastering with cement mortar 1:4 (1 cement: 4 fine sand) etc complete and finishing with white cement base wall putty and distemper to match with the existing coiour as per direction of Engineer-in-charge (Appx size of the hole 27" x 18")
Providing white cement (1 Kg pack) as per instruction of Engineer-in-charge.
Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25 mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete: 25 mm dia
Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25 mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete: : 20 mm dia
Supply of Portland cement (as per IS:269) as per instruction of Engineer-in-charge.
Supply of river clean Coarse sand (zone III) for miscellaneous works including royalty as per instruction of of Engineer-in-charge. .
Supply of stone Aggregate (Single size) : 20 mm nominal size for misc works including royalty as per instruction of of Engineer-in-charge.
Supply of Dehradun white lime Lime as per instruction of Engineer in charge.
Supply of Fly ash bricks conforming to I.S. 12894 for misc works including royalty as per instruction of Engineer-in-charge.
Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with vibratory compaction laid in required pattern and including over 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Enganeer-in-charge.
Chequered precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).: Medium shade pigment using 50% white cement 50% Grey cement
Providing and fixing false ceiling at all heights including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150mmon both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, difusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks)
Providing and fixing Acrylic Sheet Wall paneeling over WPC board/frame with adhesive bonding quality including cost of adhsive of approved quality as per instruction of EIC(WPC board/frame to be paid Separetly) 2mm thick.
Providing and fixing decorative charcoal sheet Wall paneeling over WPC board/frame with adhesive bonding quality including cost of adhsive of approved quality as per instruction of EIC(WPC board/frame to be paid Separetly) 4 mm thick.
Providing and fixing decorative wall paper of apporved qulity in existing polished wooden surface in wall and ceilling areas as per instruction if EIC.
Providing hydraulic Excavator (3D ) for urgent and miscellaneous activities as on when required including fuel and manpower as per instruction of EIC
Plumbing Work:-Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430 x 260 x 350 mm or 340 x 410 x265 mm sizes respectively.
Providing and fixing white vitreous china water closet squatting pan (Indian type) : Orissa pattern W.C. pan of size 580x440 mm
Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan.
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.75 mm diameter
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110 mm diameter
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS :5382, leaving 10 mm gap for thermal expansion.Coupler 110 mm
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS :5382, leaving 10 mm gap for thermal expansion.Bend 87.5° 110 mm
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS :5382, leaving 10 mm gap for thermal expansion..Bend 87.5° 75 mm bend
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS :5382, leaving 10 mm gap for thermal expansion.Shoe (Plain) 75 mm
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS :5382, leaving 10 mm gap for thermal expansion.Shoe (Plain) 110 mm
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS :5382, leaving 10 mm gap for thermal expansion.Single tee with door 110x110x110 mm
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.110 mm
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.75 mm
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 20 mm nominal dia pipes.
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 25 mm nominal dia pipes.
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 32 mm nominal dia pipes.
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 40 mm nominal dia pipes.
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 50 mm nominal dia pipes.
Providing and fixing brass stop cock of approved quality : 15 mm nominal bore
Providing Semi Rigid PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c PVC waste fittings
Providing Semi Rigid PVC waste pipe for sink and wash basin 40 mm dia with length not less than 700 mm i/c PVC waste fittings
Providing Brass full way valve with C.I. wheel (screwed end) 25 mm dia confirming to relevant IS as per direction of EIC.
Providing Brass full way valve with C.I. wheel (screwed end) 32 mm dia confirming to relevant IS as per direction of EIC.
Providing Brass full way valve with C.I. wheel (screwed end) 40 mm dia confirming to relevant IS as per direction of EIC.
Providing Brass full way valve with C.I. wheel (screwed end) 50 mm dia confirming to relevant IS as per direction of EIC.
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :510x1040 mm bowl depth 225 mm
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen sink without drain board 610x510 mm bowl depth 200 mm
Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length: 15 mm nominal bore
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore
Providing 600x120 mm glass shelf with anodised aluminium angle frame, C.P. brass brackets and guard rail of standard size of approved make as per direction of EIC
Providing and fixing C.P. towel rod size 600x20mm with C.P. brass screws to be approved (PLAZA brand or equivalent) as per instruction of Engineer-in-charge.
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : Flat back wash basin of size 550x400 mm
Providing C.P. soap dish (Balaji brand or equivalent) as per instruction of Engineer-in-charge.
Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity - White
Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : White solid plastic seat with lid
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore
Providing C.P. Brass long nose bibcock 15 mm confirming to relevant IS as per direction of EIC.
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
Providing G.I. pipes 15 mm dia of medium grade of approved make as per instuction of EIC.
Providing G.I. pipes 20 mm dia of medium grade of approved make as per instuction of EIC.
Providing G.I. pipes 25 mm dia of medium grade of approved make as per instuction of EIC.
Providing G.I. pipes40 mm dia of medium grade of approved make as per instuction of EIC.
Providing G.I. pipes 50 mm dia of medium grade of approved make as per instuction of EIC.
Providing G.I. pipes 80 mm dia of medium grade of approved make as per instuction of EIC.
Providing U-PVC pipes (working pressure 4 kg / cm²) Single socketed pipe:40 mm dia as per instruction of EIC
Providing UPVC bend 87.5° 40 mm bend confirming to relevant IS , phased manner of approved make as per direction of EIC.
providing coupling 40mm for kitchen sink of approved make as per direction of EIC.
Providing 32 mm cp waste for wash basin of 4 inch long of approved make as per direction of EIC.
Providing 15 mm PTMT bib cock approved make of approved make as per direction of EIC.
Providing brass spindle suitable for CP pillar cock, cp bib cock of approved make as per direction of EIC
Providing PVC washer suiatable for brass bib cock and stop cock of approved make in a phased manner of approved make as per direction of EIC.
Providing PVC low level cistern handle as per instruction of Engineer-in-Charge.
Providing PVC low level cistern washer kit as per instruction of Engineer-in-Charge.
Providing float valve for low level flushing cistern in a phased manner of approved make as per direction of EIC.
Providing flush bend for flushing cistern of length 1.00 Mtr of approved make as per direction of EIC.
Providing PVC 'P' trap 100 mmX100 mm for European pan of approved make as per direction of EIC
Providing CP angle push cock of approved make as per direction of EIC.
Providing and fixing C.P. shower rose with arm (Plaza brand or equivalent) of approved quality complete with 15 mm or 20 mm inlet 100 mm diameter as per instruction of Engineer-in-Charge.
Providing 15 mm dia CP short piece of 25 mm long in a phased manner of approved make as per direction of EIC.
Providing 100 mm X100 mm nahani trap in a phased manner of approved make as per direction of EIC.
Providing polyethylene water storage tank cover as per instruction of Engineer-in-charge.
Providing M-seal adhesive or equivalent (in packets of 100 gm) as per instruction of Engineer-in-Charge.
Providing solvent cement of 100 gm in suitable container for jointing PVC pipes in a phased manner of approved make as per direction of EIC.
Providing CPVC PLAIN ELBOW- 20mm dia of approved quality as per instruction of Engineer-in-charge
Providing CPVC PLAIN ELBOW- 25mm dia of approved quality as per instruction of Engineer-in-charge
Providing CPVC PLAIN ELBOW- 50 mm dia of approved quality as per instruction of Engineer-in-charge
Providing CPVC reducing Elbow 90° of approved make as per direction of EIC. 25X20
Providing CPVC reducing Elbow 90° of approved make as per direction of EIC. 40X25
Providing CPVC reducing Elbow 90° of approved make as per direction of EIC. 50X25
Providing CPVC TEE - 20mm dia of approved quality as per instruction of Engineer-in-charge
Providing CPVC TEE - 25mm dia of approved quality as per instruction of Engineer-in-charge
Providing CPVC TEE - 40mm dia of approved quality as per instruction of Engineer-in-charge
Providing CPVC Equal TEE - 50mm dia of approved quality as per instruction of Engineer-in-charge
Providing BRASS TEE - 20mm dia of approved quality as per instruction of Engineer-in-charge
Providing BRASS TEE - 25mm dia of approved quality as per instruction of Engineer-in-charge
Providing CPVC female threaded tee brass of approved make as per direction of EIC 20 mm dia
Providing CPVC female threaded tee brass of approved make as per direction of EIC 25 mm dia
Providing CPVC female threaded tee brass of approved make as per direction of EIC 40 mm dia
Providing CPVC female threaded brass elbow of approved make as per direction of EIC 20 mm dia
Providing CPVC female threaded brass elbow of approved make as per direction of EIC 25 mm dia
Providing CPVC FTA brass of approved make as per direction of EIC. 20 mm dia
Providing CPVC FTA brass of approved make as per direction of EIC. 25 mm dia
Providing CPVC FTA brass of approved make as per direction of EIC. 40 mm dia
Providing CPVC tank connectors of approved make as per direction of EIC. 20 mm dia
Providing CPVC tank connectors of approved make as per direction of EIC. 25 mm dia
Providing CPVC tank connectors of approved make as per direction of EIC. 40 mm dia
Providing CPVC tank connectors of approved make as per direction of EIC. 50 mm dia
Providing CPVC reducing Tee of approved make as per direction of EIC. 25X20
Providing CPVC reducing Tee of approved make as per direction of EIC. 40X25
Providing CPVC reducing Tee of approved make as per direction of EIC. 50X25
Providing CPVC UNION - 20mm dia of approved quality as per instruction of Engineer-in-charge
Providing CPVC UNION - 25mm dia of approved quality as per instruction of Engineer-in-charge
Providing CPVC UNION - 40mm dia of approved quality as per instruction of Engineer-in-charge
Providing CPVC UNION - 50mm dia of approved quality as per instruction of Engineer-in-charge
Providing GI RS 15MM to 20MM dia of approved quality as per instruction of Engineer-in-charge
Providing GI RS 20MM to 25MM dia of approved quality as per instruction of Engineer-in-charge
Providing GI RS 25MM to 30MM dia of approved quality as per instruction of Engineer-in-charge
Providing GI RS 32MM to 40MM dia of approved quality as per instruction of Engineer-in-charge
Providing CPVC ball valve of approved make as per direction of EIC. 20 mm dia
Providing CPVC ball valve of approved make as per direction of EIC. 25 mm dia
Providing CPVC ball valve of approved make as per direction of EIC. 40 mm dia
Providing CPVC ball valve of approved make as per direction of EIC. 50 mm dia
Providing CPVC BRASS ELBOW - 25mm dia of approved quality as per instruction of Engineer-in-charge
Providing BRASS ELBOW - 20mm dia of approved quality as per instruction of Engineer-in-charge
Providing CPVC SOCKET - 25mm dia of approved quality as per instruction of Engineer-in-charge
Providing CPVC SOCKET - 32mm dia of approved quality as per instruction of Engineer-in-charge
Providing CPVC SOCKET - 40mm dia of approved quality as per instruction of Engineer-in-charge
Providing CPVC SOCKET - 50mm dia of approved quality as per instruction of Engineer-in-charge
Providing CPVC BIT NIPPLE - 20mm dia of approved quality as per instruction of Engineer-in-charge
Providing CPVC BIT NIPPLE - 25mm dia of approved quality as per instruction of Engineer-in-charge
Providing RACK BOLT using wash basin of approved make as per direction of EIC
Providing and fixing 15 mm CP brass pillar tap of approved quality by (PLAZA brand or equivalent) as per instruction of Engineer-in-charge.
Providing and fixing CP Health Faucet with CP Tube & Hook set and Bib cock two in one quater turn of Jaquar make or approved equivalent quality complete set i/c cost of labour and materials complete as per instruction of EIC.
Providing and fixing Wall Mixer 3 in 1 Quarter turn of approved brand Jaquar or equivalent make as per direction of EIC
Providing C.P. brass bib cock of approved quality conforming to IS:8931 :15 mm nominal bore
Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. of approved make as per instruction of EIC(the tail pieces will be paid separately): 80mm diameter Class II
Providing C.I. sluice valve (with caps) class l 100 mm dia confirming to relevant IS as per direction of EIC.
Providing C.I. sluice valve (with caps) class l 150 mm dia confirming to relevant IS as per direction of EIC.
Providing C.I. sluice valve (with caps) class l 200 mm dia confirming to relevant IS as per direction of EIC.
Providing PVC float valve for existing PVC water tank of make (Watertek/Supreme or equivalent) approved make as per direction of EIC
Providing C.I. foot Valve 3" approved make as per direction of EIC
Providing C.I. foot Valve 4" approved make as per direction of EIC
Providing Stainless steel Spindle with check nut for 3” Valve approved make as per direction of EIC
Providing Stainless steel Spindle with check nut for 4” Valve approved make as per direction of EIC
Providing Stainless steel Spindle with check nut for 6” Valve approved make as per direction of EIC
Providing Stainless steel Spindle with check nut for 8” Valve approved make as per direction of EIC
Carpentry Work:-Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.: Fixed to steel windows by welding.
Taking out doors, windows and clerestory windows (steel or wood) including stacking within 50 metres lead: Of area 3 sq. metres and below.
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes.
Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade I Type II, in paneling fixed in aluminium doors, windows shutters and partition frames with C.P. brass/ stainless steel screws etc. complete as per architectural drawings and direction of Engineer-in-charge: Prelaminated particle board with decorative lamination on one side and balancing lamination on other side.
Steel work welded in buit up sections / framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using strucural steel etc. as required: In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
Providing and fixing factory made panel PVC door shutter consisting of frame made out ofM.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20mmshall be tapered in 45 degree angle on both side forming styles and 5mmthick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115mmwide PVC sheet out of which 75mmshall be flat and 20mmshall be tapered on both sides to formlock rail. Top, bottom and lock rails shall be provided both side of the panel. 10mm (5mmx 2 ) thick, 20mmwide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7mm (5mm+2mm) thick x 15mmwide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing.30 mm thick plain PVC door shutters
Providing and fixing ISI marked flush door shutters conforming to IS::2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 25mm thick (for cupboards) including ISI marked nickel plated bright finished MS Piano hinges with necessary screws.
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)
Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete (Copper oxidised as per IS 1378) : 300x16 mm
Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete (Copper oxidised as per IS 1378) : 250x16 mm
Providing Anodised Aluminium tower bolt (barrel type) 200x10 mm ISI in a phased manner of approved make as per direction of EIC.
Providing Anodised Aluminium tower bolt (barrel type) 150x10 mm ISI in a phased manner of approved make as per direction of EIC.
Providing Oxidised mild steel sliding door bolt 300x16 mm ISI marked in a phased manner of approved make as per direction of EIC.
Providing oxidised mild steel sliding door bolt 250x16 mm ISI marked of approved male as per direction of EIC
Providing Anodised Aluminium handles 125 mm with plate 175 x 32 mm ISI in a phased manner of approved make as per direction of EIC.
Providing Anodised Aluminium handles 100 mm with plate 150 x 32 mm ISI in a phased manner of approved make as per direction of EIC.
Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Twin rubber stopper
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.
Chromium plated Brass casement stays (straight peg type) 250 mm weighing not less than 0.28 kg in a phased manner of approved make as per direction of EIC.
Providing float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm) of approved make as per requirement and direction of EIC.
Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge.With stainless steel cover plate minimum 1.25 mm thickness
Providing and fixing Pre -laminated medium density fibre board exterior grade (Grade-I) IS:14587:1998 marked, to frame, backing or studding with screws etc. complete ( Frames, backing or studding to be paid separately).Pre-laminated with decorative lamination on both side exterior Grade - I MDF Board 12 mm thick confirming to IS:14587
Providing and fixing Pre -laminated medium density fibre board exterior grade (Grade-I) IS:14587:1998 marked, to frame, backing or studding with screws etc. complete ( Frames, backing or studding to be paid separately).Pre-laminated with decorative lamination on both side exterior Grade - I MDF Board 18 mm thick confirming to IS:14587
Float glass sheet of nominal thickness 5.0 mm (weight not less than 12.50 kg/sqm) of approvedquality in a phased manner of approved make as per direction of EIC.
Providing stainless steel butt hinges 125x64x1.9 mm IS : 12817 marked in aphased manner as per requirement of approved make as per direction of EIC.
Providing stainless steel butt hinges 100x58x1.9 mm IS : 12817 marked in a phased manner as per requirement of approved make as per direction of EIC.
Providing fevicol or equivalent adhesive of approved quality as per instruction of Engineer-in-charge.
Providing BWR plywood of approved quality 19 mm thick as per instruction of Engineer-in-charge.
Providing BWR plywood of approved quality 12 mm thick as per instruction of Engineer-in-charge.
Providing BWR plywood of approved quality 6 mm thick as per instruction of Engineer-in-charge.
Providing 1 mm thick laminate of approved quality as per instruction of Engineer-in-Charge. (8'x4')
Providing maruti lock for aluminium glazed window of approved make as per direction of EIC
Providing sliding glass runner as per instruction of Engineer-Charge.
Removing of damage glass panes & providing and fixing black /brown glass panes in door /window with sliding glass runner, rubber and necessary screws fitting as per instruction of Engineer-Charge.
Providing and fixing inter lock for Godrej make necessary screw fixing as per instruction of EIC.
Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides as per requirement of approved make as per direction of EIC.
Providing ms handle 125mm for steel glazed window of approved make as per direction of EIC
Providing M.S nail of different sizes of approved make as per direction of EIC
Providing Welding rod per instruction of EIC
Providing MS screws 13/6 of approved make as per direction of EIC
Providing MS screws 19/6 of approved make as per direction of EIC
Providing Steel screws 25/6 of approved make as per direction of EIC
Providing ms steel screws 35/8 of approved make as per direction of EIC
Providing steel screws 60/10 of approved make as per direction of EIC
Providing ms screws 32/8 of approved make as per direction of EIC
Providing SS carrage bolt of approved make as per direction of EIC
Providing 4'' cutter wheel of approved make as per direction of EIC
Providing box hinges of approved make as per direction of EIC
Providing PVC wall plug of approved make as per direction of EIC
Providing pelmet clip (long type) in a phased manner of approved make as per direction of EIC.
Providing 28 gauge aluminium sheet (to be fixed in door) as per instruction of Engineer-in-charge
Polishing on wood work with ready made wax polish of approved brand and manufacture :
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
Providing and fixing flat pressed three layer particle or graded plain wood board medium density exterior grade (Grade I) FPT-I, conforming and marked to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately):18 mm thick
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels.Granite stone slab of colour black, Cherry/Ruby red Area of slab over 0.50 sqm
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, bufing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5 mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.Frame size 65 x 125 mm
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 35 mm thick
Providing Water tanker 5000 litre as per instruction of of Engineer-in-charge
Providing and fixing of 100mm G.I pipes complete with G.I fittings including trenching & refilling(External work) all complete as per instruction of the EIC.
Providing and fixing of 150 mm G.I pipes complete with G.I fittings including trenching & refilling(External work) all complete as per instruction of the EIC.
Providing 50mm dia G.I flange as per instruction of EIC
Providing 80mm dia G.I flange as per instruction of EIC
PART C - ELECTRICAL PORTION (WITHOUT ITC AVAILABILITY)
Engaging electrical Supevisor for handling and recording of materials distribution, job allotment, job inspection, record maintenanc. Keep Safety in alloted work.(Highly Skilled Manpower-1 nos ) Note: All type of tools & safety apparatus for the deployed personnel to be provided by the contractor. Deployed Supervisor shall have the qualification of diploma in Electrical or Electrical Supervisor lisence having minimum MV grade and adequate knowledge of maintaining computerized records Penalty terms : In case of non-deployment of the labour on any day, penalty @ Prevailing labour cost + 15% of the cost will be deducted as penalty
Substation attendent cum DG operator at Anand Vihar 11KV/415 volt switch room at TPWODL power failure time including substation attendant work . Works as per the instruction of Engineer – in- charge for 24 hours everyday. (Skilled substation attendant/ switch gear/DG operation with keeping update reading records of 11kv/415v sub-station having valid electrical licence- 3 nos. with shift duty). Note: All type of tools & safety apparatus to be provided by the contractor. Penalty terms : In case of non-deployment of the labour on any day, penalty @ Prevailing labour cost + 15% of the cost will be deducted as penalty
Attending electrical breakdown of Anand vihar colonies for 24 hours everyday , such as no power complaints general complaints preventive maintenance of feeder pillars/ panels,Cable joints, distribution board, pump motors starters & power supply etc , specific problems of the light fitting, ceiling fans, bulb fitting & all kind of domestic or outdoor work, All types of street lights work / Garden lights, attending breakdown of cable fault of all natures, temporary connection & disconnection etc, replacement of D.O.Fuse at H.T 11 KV fuse unit etc as required,departmental renovation work. (Deployed Skilled mainpower shall be having electrical licence i.e., Lineman/Work man permit in MV grade -6 No), Semi skilled electrician helper-5 nos.) . Note: All type of tools & safety apparatus to be provided by the contractor. Penalty terms : In case of non-deployment of the labour on any day, penalty @ Prevailing labour cost + 15% of the cost will be deducted as penalty
Upkeeping of Sub-station, Switchyards, lifts, electrical installations, trimming of trees for overhead line & Street lighting clearance (with deployment of minimum 04 nos. Unskilled labour) Note: All type of tools & safety apparatus to be provided by the contractor. Penalty terms : In case of non-deployment of the labour on any day, penalty @ Prevailing labour cost + 15% of the cost will be deducted as penalty
Deployment of 01 no. Lift technician (Skilled manpower) fro emergency rescue and regular maintenance of the lift and co-ordination of the service provider for the regular maintenance. Penalty terms : In case of non-deployment of the labour on any day, penalty @ Prevailing labour cost + 15% of the cost will be deducted as penalty
Supply of Piano Type single way switch 6 Amps, 230 V of Anchor/Cona/Havells or of equivalent reputed make
Supply of Piano Type 2 way switch 6 Amps, 230 V of Anchor/Cona/Havells or of equivalent reputed make
Supply of Piano Type single way switch 16 Amps, 230 V Anchor/Cona/Havells or of equivalent reputed make
Supply of Socket, 6 Amp, 5 pin, 230 V Anchor/Cona/Havells or of equivalent reputed make
Supply of Socket, 16/6 Amp, 5 pin, 230 V Anchor/Cona/Havells or of equivalent reputed make
Supply of bell push , piano type swicth of Anchor/Cona/Havells or of equivalent reputed make
Supply of Angle Holder, 6 Amp,230 V of Anchor/Cona/Havells or of equivalent reputed make
Supply of Modular switch 6A of Anchor/Cona/Havells or of equivalent reputed make as required
Supply of Modular switch 16A of Anchor/Cona/Havells or of equivalent reputed make as required
Supply of Modular socket 6A of Anchor/Cona/Havells or of equivalent reputed make as required as required
Supply of Modular socket 16A of Anchor/Cona/Havells or of equivalent reputed make as required
Supply of Modular Stapped type Fan regulator of Anchor/Cona/Havells or of equivalent reputed make as required
supply of Ding Dong call bell,230v of anchor/cona/Havells or of equvalent reputed make
Supply of 1.5 sqmm PVC insulated, Multistrand copper cable, ISI Marked Single core of Polycab/Finolex/V-guard/Havells or of reputed make
Supply of 2.5 sqmm PVC insulated, Multistrand copper cable, ISI Marked Single core of Polycab/Finolex/V-guard/Havells or of reputed make
Supply of 4 sqmm PVC insulated, Multistrand copper cable, ISI Marked Single core of Polycab/Finolex/V-guard/Havells or of reputed make
Supply of 6 sqmm PVC insulated, Multistrand copper cable, ISI Marked Single core of Polycab/Finolex/V-guard/Havells or of reputed make
Supply of 10 sqmm PVC insulated, Multistrand copper cable, ISI Marked Single core of Polycab/Finolex/V-guard/Havells or of reputed make
Supply of 16 sqmm PVC insulated, Multistrand copper cable, ISI Marked Single core of Polycab/Finolex/V-guard/Havells or of reputed make
Supply of MCB 32-Amp,10 KA, C-Curve230 Volt Single Pole of Havells/L&T/ABB/Legrand or of equivalent reputed make
Supply of MCB 25-Amp,10 KA, C-Curve230 Volt Single Pole of Havells/L&T/ABB/Legrand or of equivalent reputed make
Supply of MCB 20-Amp,10 KA, C-Curve230 Volt Single Pole of Havells/L&T/ABB/Legrand or of equivalent reputed make
Supply of MCB 16-Amp,10 KA, C-Curve230 Volt Single Pole of Havells/L&T/ABB/Legrand or of equivalent reputed make
Supply of MCB 6-Amp,10 KA, C-Curve230 Volt Single Pole of Havells/L&T/ABB/Legrand or of equivalent reputed make
Supply of MCB 63-Amp,10 KA, C-Curve230 Volt two Pole of Havells/L&T/ABB/Legrand or of equivalent reputed make
Supply of MCB DP 32 Amp, 230 volt of Havells/L&T/ABB/Legrand or of equivalent reputed make
Supply of MCB 63-Amp,10 KA, C-Curve230 Volt fore Pole of Havells/L&T/ABB/Legrand or of equivalent reputed make
Supply of 4 pole, 100A MCCB, 10/20KA short circuit capacity of Havells/L&T/ABB/Schneider or of equivalent make
Supply of 4 pole, 200A MCCB, 10/20KA short circuit capacity of Havells/L&T/ABB/Schneider or of equivalent make
Supply of 4 pole, 400A MCCB, 25-65KA short circuit capacity of Havells/L&T/ABB/Schneider or of equivalent make
Supply of 4 pole, 630A MCCB, 25-65KA short circuit capacity of Havells/L&T/ABB/Schneider or of equivalent make
Supply of 4 pole, 63A ELCB/RCCB, 30mA capacity of Havells/L&T/Schneider/ABB/Legrand of of equivalent reputed make
Supply of 4 pole, 40A ELCB/RCCB, 30mA capacity of Havells/L&T/Schneider/ABB/Legrand of of equivalent reputed make
Supply of 2 pole, 63A ELCB/RCCB, 30mA capacity of Havells/L&T/Schneider/ABB/Legrand of of equivalent reputed make
Supply of 2 pole, 40A ELCB/RCCB, 30mA capacity of Havells/L&T/Schneider/ABB/Legrand of of equivalent reputed make
Supply of 3 mm thick phenolic laminated sheet
Supply of PVC conduit / Pipe 25 mm
Supply of PVC conduit / Pipe 20mm
Supply of PVC coupler/ saddle 20mm
Supply of PVC coupler/saddle 25mm
Supply of PVC bend 20 mm
Supply of PVC bend 25 mm
Supply of 600 Amp Aluminium Bus bar chamber as per standard IE Specifications
Supply of Aluminium Socket 10 sq mm
Supply of Aluminium Socket 16 sq mm
Supply of Aluminium Socket 25 sq mm
Supply of Aluminium Socket 35 sq mm
Supply of Aluminium Socket 50 sq mm
Supply of Aluminium Socket 70 sq mm
Supply of Aluminium Socket 95 sq mm
Supply of Aluminium Socket 120 sq mm
Supply of Aluminium Socket 185 sq mm
Supply of Aluminium Socket 240 sq mm
Supply of Aluminium Socket 300 sq mm
Supply of 4 way MCB DB with cover (Mild steel)
Supply of SPN MCB 12 way distribution Box, Double door, horizontal type
Supply of 200mm x 150 mm Danger plate
Pin Insulator with GI-Pin LT 11KV
Supply of Disc Insulator 11KV/33KV
Supply of 11kv Lighting Arrester
Supply of Paint as required
Supply of Cotton Waste, Cleaning Cloth etc.
Supply of Outdoor heat shrinkable cable end Termination Kit , Core Type: 3 Core,, Size: upto 95mm , of Material: XLPE ALUMINIUM CONDUCTOR CABLE OF 11 KV GRADE as required
Supply Of Steel Fastener 6mm X 75mm
Supply Of Steel Fastener 8mm X 75mm
Supply Of Cleaning Materials Like Soap / Detergent
Supply of CEILING ROSE, 3 PIN, 5 AMPS ISI MARKED, 230 V of Anchor/Cona/Havells or of equivalent reputed make
Supply of Straight through heat shrinkable cable jointing kit with ferrules for 11kv grade XLPE cable for 3 core 120 sq.mm.
Rewinding of ceiling fan with copper winding, varnishing, required bearings,rubber bush with clamp as required
Painting of street light pole of 8 to 10 meters height including arm and pole box with one coat of red oxide primer and two or more coat of aluminium paint of reputed make including cost of cleaning of the pole by emery paper and wire brush etc as required
Supply of Plug top, 16 amp, 3 pin, 230 V of Anchor/Cona/Havells or of equivalent .
Supply of Plug top, 6 amp, 3 pin, 230 V of Anchor/Cona/Havells or of equivalent .
Supply of stepped switch type regulator of Anchor/Cona/Havells or of equivalent reputed make
Supply of fan capacitor, 2.5 mfd, 230 V of reputed make
Supply of 2core X 6 sqmm, CTS aluminium wire of Polycab/Finolex/V-guard/Havells or Euivalent reputed make
Supply of 2core X 4 sqmm, CTS alluminium wire of Polycab/Finolex/V-guard/Havells or of reputed make
Supply of PVC Insulated twin core copper flexible wire 40/60, 230 V of of Polycab/Finolex/V-guard/Havells or of reputed make
Supply of LED tube light complete fitting, 18/20 Watt of Syska/Wipro/Bajaj/Crompton/Phillips or of equivalent reputed make
Supply of 10 W LED B22 bulb of Syska/Wipro/Bajaj/Crompton/Phillips or of equivalent reputed make
Supply of 15 W LED B22 bulb of Syska/Wipro/Bajaj/Crompton/Phillips or of equivalent reputed make
Supply of MCB Cover Double Pole reputed make
Supply of PVC Board of 4"x4"x2" size reputed make
Supply of PVC Board of 4"x6"x2" size reputed make
Supply of PVC Board of 6"x8"x2" size reputed make
Supply of PVC Board of 8"x10"x2" size reputed make
Supply of PVC Insulated adhesive tape 3/4", 10 mtrs long
Supply of Rubber tape, 3/4" size, 10 mtr roll (HT)
Supply of Empire tape ,L-30 m, W-1''
Supply of Casing caping(reputed make) 1/2"
Supply of Casing caping (reputed make) 3/4"
Supply of Glass Tape, 1" size, 40 mtr length,Width- 1''
Supply of 100 Amp copper Bus bar chamber as per standard IE Specifications
Supply of 200 Amp copper Bus bar chamber as per standard IE Specifications
Supply of LED street light 90 watt, with minimum Lumen capacity of 100Lm/W, voltage range of 180V - 300V or higher of Syska/Bajaj/Crompton/ Havells/Phillips or of equivalent reputed make
Supply of LED down light 6" dia, 15 watt with minimum Lumen capacity of 100Lm/W, voltage range of 180V - 300V or higher of Syska/Bajaj/Crompton/ Havells/Phillips or of equivalent reputed make
Supply of 250W LED Flood light with minimum Lumen capacity of 100Lm/W, voltage range of 180V - 300V or higherof Syska/Bajaj/Crompton/ Havells/Phillips or of equivalent reputed make
Supply of 30W LED Wallkit light of Syska/Bajaj/Crompton/ Havells/Phillips or of equivalent reputed make
Supply of Bearing 6200-ZZ
Supply of Bearing 6201-ZZ
Supply of Bearing 6202-ZZ
Supply of Bearing 6203-ZZ
Supply of 0.5 W LED colour bulb of Syska/Bajaj/Crompton/Havells/Phillips or of equivalent reputed make
Supply of Casing caping nail pkt. (100 pcs)
Supply of Metal hacksaw blades 12 x 300 mm steel cutting saw blades
Supply of Steel Screw 1/2'' (1 pkt - 500 nos.)
Supply of Steel Screw 3/4'' size, 8x25,(1 pkt - 500 nos.)
Supply of Steel Screw 1.5'' size 10x50 (1 pkt - 500 nos.)
Supply of Steel Screw 1'' size 10x50 (1 pkt - 500 nos.)
Supply of Steel Screw 3'' size 10 x 75 (1 pkt - 500 nos.)
Supply of flexible pvc pipe 25mm size
Supply of Pole box with Terminal Block, GLAND,MCB & clamp, as required
Supply of Extension switch board (1.5 Mtrs)
Supply of Post Insulator 11KV/33KV
Supply of 6sqmm 2-Core Aluminium armoured cable of Polycab/Finolex/Havells or of equivalent reputed make
Supply of Chemical Earthing (min. 2.15 mtr) GI strip as required.
Supply of WHITE GREASE (per 100 ml)
Supply of PVC Gripper (Wall plug) 50mm (pkt - 100 nos.)
Supply of PVC Gripper (Wall plug) 75mm (pkt - 100 nos.)
Supply of PVC Gripper ( wall plug ) 40mm (pkt - 100 nos.)
Supply of Silica Gel (Silica Gel Blue Crystal)
Supply of Silicone Gasket compound -85GMS -High Temp
Supply of Petroleum Jelly
Supply of Rust remover (CRC (500 ml)
Supply of LED strip light (8mm with 2 amps Adopter) 20 mtrs of reputed make.
Supply of LED adoptor as required
Supply of Geyser thermostat as per requirement
Supply of Geyser Coil 1000W- 1500W as per requirement
Supply of Push button block (ON/OFF) reputed make
Supply of RYB LED phase Indicators, 230V AC, reputed make
Supply of Cordless Call Bell
Supply of Battery AA/AAA
Supply of pump as required suitable for Desert Water cooled type Fan
Supply of 4 pole 800 A MCCB with spider link, 10/20KA short circuit capacity of Havells/ L&T/ ABB/ Schneider or of equivalent make
Supply of Nail
Supply of Ceiling Fan Rubber Bush set
Supply of Transformer BREATHER (500gm)
Supply of Transformer BREATHER (1KG)
Supply of Thinner
Supply of Cable ZIP Ties 200 X 3.5 MM (100)
Supply of Cable ZIP Ties 200 X 2.5 mm (100)
Supply of Angle Grinder Blade of reputed make
Supply of SMPS 12 volt. DC supply, 400watt, Weather Proof Rainproof Suitable for LED Signage of reputed make
Supply of 12 volt, 2watt DC capsule Shape LED Module Strip light
Supply of 400W LED Flood light with minimum Lumen capacity of 100Lm/W, voltage range of 180V - 300V, IP 65 (water resistent) or higher of Syska/Bajaj/Crompton/ Havells/Phillips or of equivalent reputed make
Supply of dol starter SINGLE PHASE,240V,9-14A of reputed make
Supply of Three Phase DOL STARTER,415V, 28-40A of reputed make
Supply of Hammer Impact Drill Bit SDS size 5 X 110MM reputed make
Supply of Hammer Impact Drill Bit SDS size 6 X 110MM reputed make
Supply of Hammer Impact Drill Bit SDS size 8 X 160MM reputed make
Supply of Hammer Impact Drill Bit SDS size 16 X 310mm reputed make
Supply of (3.15 x 350 mm) All Purpose Welding Rod pkt. reputed make
Supply of Cut Resistance Safety hand Gloves PVC cotted pairs (FREE SIZE)
Supply of Khas Khas of required size suitable for Desert Water cooled type Fan
Supply of Water tray of required size suitable for Desert Water cooled type Fan
Supply of Glass fuse (5A)
Supply of Glass fuse (10A)
Supply of Glass fuse (15A)
Supply of Tinned Copper Fuse wire 20A (27 SWG) 100GM
Supply of Tinned copper FUSE wire 30A(24SWG)100GM
Supply of 33/11KV GOAB Switch With Full Fitting, Current reating-1250A,Mounting type: Horizontal,
Supply of EPDM Rubber Transformer Oil Seal Washer 11KV Side as Requred
Supply of EPDM Rubber Transformer Oil Seal Washer 440V Side as Requred
Supply Of Connection plate (TPN) 63A
Supply of HRC Base with 125A Fuse of reputed make
Supply of Digital Voltmeter (L&T and Equivalent reputed Make)
Supply of Digital Ammeter (L&T and Equivalent reputed Make)
Supply of PVC Saddle (6/8/10MM) 100 nos Pkt As required
Supply of LED strip light (TRI COLOUR) 25 mtrs of reputed make as required
Supply of Busbar Insulator
Supply of kit kat fuse 400A of reputed make
Supply of kit kat fuse 200A of reputed make
Supply of kit kat fuse 600A of reputed make
Supply of Geyser thermocot of reputed make
Supply of 5W LED down LIGHT of Syska/Wipro/Bajaj/Crompton/Phillips or of equivalent reputed make
Supply of Ceiling Fan plate
Supply of 0.75 sqmm PVC insulated, Multistrand copper cable, ISI Marked Single core of Polycab/Finolex/V-guard/Havells or of reputed make
Supply of 4 sqmm PVC insulated, Multistrand copper cable, ISI Marked Four core of Polycab/Finolex/V-guard/Havells or of reputed make
Supply of 6 sqmm PVC insulated, Multistrand copper cable, ISI Marked Four core of Polycab/Finolex/V-guard/Havells or of reputed make
Supply of 1.5 sqmm PVC insulated, Multistrand copper cable, ISI Marked Three core of Polycab/Finolex/V-guard/Havells or of reputed make
Supply of 2.5 sqmm PVC insulated, Multistrand copper cable, ISI Marked Three core of Polycab/Finolex/V-guard/Havells or of reputed make
Supply of 4 sqmm PVC insulated, Multistrand copper cable, ISI Marked Three core of Polycab/Finolex/V-guard/Havells or of reputed make
Supply of Cable Saddle steel (Clamp) Size as required
supply of 630A onload change over switch alongwith suitable mounting arrangement,with complete Encloser system and nut bolts etc.as per the site requirement of schneider / L&T / Havels or equivalent reputed make
supply of 400A onload change over switch alongwith suitable mounting arrangement,with complete Encloser system and nut bolts etc.as per the site requirement of schneider / L&T / Havels or equivalent reputed make
supply of 250A onload change over switch alongwith suitable mounting arrangement,with complete Encloser system and nut bolts etc.as per the site requirement of schneider / L&T / Havels or equivalent reputed make
Supply of MCB 2-Amp,10 KA, C-Curve230 Volt Single Pole of Havells/L&T/ABB/Legrand or of equivalent reputed make
Supply of Aluminium Socket 400 sq mm
Supply of Aluminium Socket 150 sq mm
Supply of Aluminium Tubular Inline Straight Joints socket 400 sq mm
Supply of Aluminium Tubular Inline Straight Joints socket 300 sq mm
Supply of Aluminium Tubular Inline Straight Joints socket 240 sq mm
Supply of Aluminium Tubular Inline Straight Joints socket 150 sq mm
Supply of Aluminium Tubular Inline Straight Joints socket 120 sq mm
Supply of Aluminium Tubular Inline Straight Joints socket 95 sq mm
Supply of Aluminium Tubular Inline Straight Joints socket 70 sq mm
Supply of Aluminium Tubular Inline Straight Joints socket 50 sq mm
Supply of Aluminium Tubular Inline Straight Joints socket 35 sq mm
Supply of 1.1KV grade, 4 core, XLPE sheathed stranded, armoured, 10 sq.mm aluminium cable of Polycab/Finolex/Havells or of equivalent reputed make
Supply of 1.1KV grade, 4 core, XLPE sheathed stranded, armoured, 25 sq.mm aluminium cable of Polycab/Finolex/Havells or of equivalent reputed make
Supply of 15 hp Star delta starter with 20-32A range Overload relay setting
Supply of 40hp Fully Automatic Star Delta Starter, with 30-50A range Overload Relay setting of reputed make (SS94021)
supply of 20mm pvc circular box (one way)
supply of 20mm pvc circular box (two way)
supply of 20mm pvc circular box (three way)
supply of 20mm pvc circular box (four way)
supply of 25mm pvc circular box (one way)
supply of 25mm pvc circular box (two way)
supply of 25mm pvc circular box (three way)
supply of 25mm pvc circular box (four way)
Supply of GI Nut Bolt with washer as per the size requirement
Providing of MN-5 Thermal overload relay with start and off/ reset (Cat No-SS94136OOEO) Ranse 20-33A
Providing of MN-5 Thermal overload relay with start and off/ reset (Cat No-SS94136OOGO) Ranse 30-50A
Providing of Type ML-2/3, Contactor ranging from 13-21 A, (Cat No SS591859 OOCO)
Providing of Type ML-2/3, Contactor ranging from 20-32 A, (Cat No SS91859 OOEO)
Providing of Type ML-2/3, Contactor ranging from 28-42 A, (Cat No SS91859 OOFO)
Providing of Electronic Timer Type ST 100 (3-30 secs) Cat No ST 803280000
Providing of 3-Pole Power Contractors type ML-2 (Cat No SS 90701)
Providing of 3-Pole Power Contractors type ML-3 (Cat No SS 9O721)
Providing of 3-Pole Power Contractors type ML-4 (Cat No SS 90910)
Providing of MNX-25 Contactor ranging from 25-45 A, (Cat No-CS94110)
Supply of Analog Voltmeter (L&T and Equivalent reputed Make)
Supply of Analog Ammeter (L&T and Equivalent reputed Make)
supply of 630A Manual change over switch alongwith suitable mounting arrangement,with complete Encloser system and nut bolts etc.as per the site requirement of schneider / L&T / Havels or equivalent reputed make
supply of 400A Manual change over switch alongwith suitable mounting arrangement,with complete Encloser system and nut bolts etc.as per the site requirement of schneider / L&T / Havels or equivalent reputed make
Supply of MCB DP 40 Amp, 230 volt of Havells/L&T/ABB/Legrand or of equivalent reputed make
Supply of MCB SP 10 Amp, 230 volt of Havells/L&T/ABB/Legrand or of equivalent reputed make
PART C -AIR CONDITIONING PART ,ELECTRICAL PORTION (WITHOUT ITC AVAILABILITY)
Deployment of labour for maintenance of Split & Window Air Conditioners and operation of the package AC and re-installation of the equipment as per the requirement (With minimum deployment of 2 nos Skilled ,4 nos Semi-Skilled labour and suitable reliver in case of Rest and absence may be provided) in shift duty basis as per requirement as per instructions of EIC. (Skilled technician shall have ITI certificate in Refrigeration & Air conditioner Trade or Passed in Electrician Trade in ITI having Lineman/Workman Permit-MV or minimum 3 years experience in Air Conditioning maintenance work in both single phase & three phase AC for Skilled person. Having ITI certificate in Refrigeration & Air conditioner Trade or Passed in Electrician Trade in ITI having Lineman/Workman Permit-MV OR Minimum 1 years experience in Air Conditioning maintenance work in both single phase & three phase AC for Semi-Skilled person.) Special Terms : Atleast, 4 nos. Dry service and 01 no. wet service to be done per year for all the machines. Penalty terms : In case of non-deployment of the labour on any day, penalty @ Prevailing labour cost + 15% of the cost will be deducted as penalty
Supply of spares parts for the maintenance of Split & Window Air Conditioners for a period of two years for 191 AC (All required materials and spare parts for Split & Window AC for smooth running of the machine is to be provided by the contractor during his CAMC period). Special Terms : Atleast, 4 nos. Dry service and 01 no. wet service to be done per year for all the machines. Penalty Terms : In case of non-rectification of repair of AC within 48 hrs of the intimation in Whatsapp/e-mail/telephone, penalty @ Rs.500/- per day per AC shall be deducted).
Supply of spares parts for the maintenance of the 3TR Tower Air Conditioners for a period of two years for 19 nos (All required materials and spare parts for Tower AC for smooth running of the machine is to be provided by the contractor during his CAMC period) Special Terms : Atleast, 4 nos. Dry service and 01 no. wet service to be done per year for all the machines. Penalty Terms : In case of non-rectification of repair of AC within 48 hrs of the intimation in Whatsapp/e-mail/telephone, penalty @ Rs.500/- per day per AC shall be deducted).
Supply of spares parts for the maintenance of the 4TR Tower Air Conditioners for a period of two years for 3 nos AC (All required materials and spare parts for Tower AC is to be provided by the contractor during his CAMC period) Penalty Terms : In case of non-rectification of repair of AC within 48 hrs of the intimation in Whatsapp/e-mail/telephone, penalty @ Rs.500/- per day per AC shall be deducted). In case of no Wet or Dry service done as per instructions,
Comprehensive Annual Maintenance of air cooled packaged Air Conditioner of Nisigandha Club at Anandvihar vihar,MCL HQ(Tonnage capacity of 66 TR)All required materials and spare parts for Package AC is to be provided by the contractor during his CAMC period. Special Terms : Atleast, inspection and necessary preventive maintenance to be done once in a month Penalty Terms : In case of non-rectification of repair of AC within 48 hrs of the intimation in Whatsapp/e-mail/telephone, penalty @ Rs.500/- per day per AC shall be deducted). In case of no preventive maintenance done, the payment for the respective month shall be deducted as penalty
Supply of Copper pipe 3/8" (For re-installation purposes only)
Supply of Copper pipe 5/8" (For re-installation purposes only)
Supply of Copper pipe 6/8" (4TR) (For re-installation purposes only)
Supply of Insulation Pipe 3/8",5/8" & 6/8" Size (For re-installation purposes only)
Supply of Copper pipe 1/2" (For re-installation purposes only)
Supply of Copper pipe 1/4" (For re-installation purposes only)
Supply of remote battery(1 set=02 nos)
Supply of 1/2 inch PVC drain Pipe
PART C -DG PART ,ELECTRICAL PORTION (WITHOUT ITC AVAILABILITY)
CAMC for 01 no. 500KVA DG sets installed at MCL HQ for a period of 02 years. SCOPE OF WORKS FOR SERVICE PROVIDER 1. IT COVERS REPLACEMENT OF ALL TYPES OF FILTERS, ELECTRONIC CARDS, HOSE PIPES, CLAMPS,HIGH PRESSURE PIPES, NOZZLES, PUMPS, VALVES, STARTER, GAUGE, ACTUATOR COMPLETE SET,ELECTRONIC CONTROL UNIT CARD(GOVERNOR CARD)WITH PROGRAMMING, RADIATOR AND AFTER COOLER CLEANING & REPAIRING WORK, RADIATOR FAN, TURBO CHARGER SYSTEM, BELTS,THERMOSTAT, OIL SEAL, GASKET PACKINGS, COOLANT OVER FLOW BOX, BATTERY CLAMP, MCBs ,FUSE, INDICATORS, CONTACTOR WITH COIL,RELAYS , SENSORS, AVR, CHARGINGALTERNATOR, CONTROLLER WITH PROGRAMMING,DG SET AMF PANEL SPARE ARE INCLUDED IN THE CAMC etc. 2. HOWEVER SOME OF REGULAR CONSUMABLE ITEMS LIKE FILTER ELEMENTS, HOSE PIPE & CLAMPS, GASKET, BATTERY CLAMPS, HIGH PRESSURE PIPE, SEALS & WASHER, AVR CARD, CONTACTOR COIL & FUSE ITEMS ETC. WILLBE KEPT AS SPARE UNDER THE CUSTODY OFENGINEER IN CHARGE. SCOPE OF WORKS FOR MCL 1. ALL TYPES ENGINE OIL, COOLANTS, DISTILLED WATER AND BATTERY UNDER PROVISION OF MCL 2. ENGINE OVER HAULING IS UNDER SCOPE OF MCL 3. ALTERNATOR AND MOTOR PART IS UNDER SCOPE OF MCL SPECIAL TERMS AND CONDITION 1. THE EXECUTION OF WORK AND SPARES REPLACEMENT SHOULD BE DONE THROUGH OEM/AUTHORIZED DEALER OF DG SET. 2. PERIODICAL MAINTENANCE WILL BE DONE IN EVERY MONTH. PENALTY TERMS : IN CASE OF FAILURE OF PERIODICAL MAINTENANCE IN ANY SPECIFIC MONTH DURING CONTRACT PERIOD PAYMENT WILL NOT BE DONE FOR THE SAME. INCASE OF BREAKDOWN, BREAKDOWN ATTEND WILL BE CONDUCTED WITH IN INTIMATION OF 48 HOURS AND RECTIFICATION SHALL BE DONE WITH IN 7 DAYS OFBREAKDOWN. IN CASE OF NON-RECTIFICATION OF THE SAME, PENALTY OF DOUBLE THE AMOUNT OF THE BREAKDOWN PERIOD WILL BE DEDUCTED ACCORDINGLY.
CAMC for 02 no. 82.5KVA DG sets installed at MCL HQ for a period of 02 years. SCOPE OF WORKS FOR SERVICE PROVIDER 1. IT COVERS REPLACEMENT OF ALL TYPES OF FILTERS, ELECTRONIC CARDS, HOSE PIPES, CLAMPS,HIGH PRESSURE PIPES, NOZZLES, PUMPS, VALVES, STARTER, GAUGE, RADIATOR AND AFTERCOOLER CLEANING & REPAIRING WORK, RADIATOR FAN, TURBO CHARGER SYSTEM, BELTS,THERMOSTAT, OIL SEAL, GASKET PACKINGS, COOLANT OVER FLOW BOX, BATTERY CLAMP, MCBs ,FUSE, INDICATORS, CONTACTOR WITH COIL,RELAYS , SENSORS, AVR, CHARGING ALTERNATOR, CONTROLLER WITH PROGRAMMING,DG SET AMF PANEL SPARE ARE INCLUDED IN THE CAMC,etc. 2. HOWEVER SOME OF REGULAR CONSUMABLE ITEMS LIKE FILTER ELEMENTS, HOSE PIPE & CLAMPS, GASKET, BATTERY CLAMPS, HIGH PRESSURE PIPE, SEALS & WASHER, AVR CARD, CONTACTOR COIL & FUSE ITEMS ETC. WILLBE KEPT AS SPARE UNDER THE CUSTODY OFENGINEER IN CHARGE. SCOPE OF WORKS FOR MCL 1. ALL TYPES ENGINE OIL, COOLANTS, DISTILLED WATER AND BATTERY UNDER PROVISION OF MCL 2. ENGINE OVER HAULING IS UNDER SCOPE OF MCL 3. ALTERNATOR AND MOTOR PART IS UNDER SCOPE OF MCL SPECIAL TERMS AND CONDITION 1. THE EXECUTION OF WORK AND SPARES REPLACEMENT SHOULD BE DONE THROUGH OEM/AUTHORIZED DEALER OF DG SET. 2. PERIODICAL MAINTENANCE WILL BE DONE IN EVERY MONTH. PENALTY TERMS : IN CASE OF FAILURE OF PERIODICAL MAINTENANCE IN ANY SPECIFIC MONTH DURING CONTRACT PERIOD PAYMENT WILL NOT BE DONE FOR THE SAME. IN CASE OF BREAKDOWN, BREAKDOWN ATTEND WILL BE CONDUCTED WITH IN INTIMATION OF 48 HOURS AND RECTIFICATION SHALL BE DONE WITH IN 7 DAYS OF BREAKDOWN. IN CASE OF NON-RECTIFICATION OF THE SAME, PENALTY OF DOUBLE THE AMOUNT OF THE BREAKDOWN PERIOD WILL BE DEDUCTED ACCORDINGLY.
Total impact of GST plus Labour Cess [@ 1 % (BOCW Cess to be deducted from the RA bill as per the value of the work progress)] for the purpose of CTC
Please Enable Macros to View BoQ information
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.05 MB
Tendernotice_1.pdf
PDF • 0.63 MB
Tendernotice_2.pdf
PDF • 2.10 MB
BOQ_363216.xls
BOQ • 0.73 MB
Download all tender documents and submit your bid