8445/E8 SPECIAL REPAIR FOR MD ACCN BLDG NO T-1 AT VAIDHYA VIHAR AND SPECIAL REPAIR TO SECURITY FENCING AND JAFARI OF STN HQ AND BDE HQ AT SHAHJAHANPUR CANTT UNDER GE (EAST) BAREILLY

Amount

Taking down cement plaster including racking out joints hacking for key and scrubbing down with water etc.

M&L rendering 15mm thick in cement plaster 1:6 on surfaces other than fair faces of brick work and surface finished even and smooth without using extra cement

M&L rendering 15mm thick in cement plaster 1:4 on surfaces fair faces of brick work and surface finished even and fair without using extra cement

M&L rendering 10mm thick in cement plaster 1:4 on concrete surfaces of ceilling and finished the surface even and smooth without using extra cement all as specified

M&L for two coats of cement base paint incl preparation of new surface of wall complete all as specified and as directed.

M&L for two coats of cement base paint incl preparation of old decorated surface of wall complete all as specified and as directed.

M& L for two coat of oil bound distemper incl preparation of new surface of wall complete all as specified and as directed.

M& L for two coat of oil bound distemper incl preparation of old treated surface of wall complete all as specified and as directed.

M&L three coat of white wash on ceilling including preparation of new plastered surface and complete all as specified

M&L preparing Old plastered or unplastered surfaces of ceiling and applying one coat of white wash on old decorated surface of ceiling complete all as specfied and direcetd.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc 1.5 sqm each complete all as specified and directed.

S&F solid PVC door frames of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube, suppling & fixing in opening as per specification & drawing.

S&F factory made solid panel PVC door shutter 30 mm thick (Style) consisiting of frame made out of MS tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain coloured PVC 'C' channel having a PVC sheet strip of 20 mm which stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rails & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement suppling & fixing in the frame at site as per specification & drawing.

S&F, 200 mm long aluminium anodised barrel tower bolts of extruded section and fixed as specified and as directed.

S&F, 75 mm long butt hinges, extruded alminium alloy with galavanised mild steel hinge pin, anodised and fixed , type C-21

S&F, 150 mm aluminium handles cast type, anodised complete all as specified and as directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 sqm but n. exc 4 sqm each complete all as specified and directed.

S & F Mild steel work as in chowkats/frame of door or gates of angle or other section with gusset plate , rail braces etc complete drilled for fixing of steel sheeting or other covering , doors etc to be prepared for hanging or sliding with and inclu either hooks and hinges or steel hanging door fittings ( exclusive of steel , sheeting or other covering , running rails and guisides ) and hanging also fastening and fixing complete all as specified Frade Fe 410 (Gde E-320)

S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides.

S & F 300 mm long mild steel sliding door bolts, ISI marked clip & bolt type, stove enamelled black, with bright bolt not less than 16mm dia with and including minimum 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and as directed.

S&F 2nd class hard wood glazed and skeleton shutters 35mm thick open rebated and prepared to receive glass , gauze etc (without sash bars) , edges of framing plain , chamfered or rounded , fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) , supplied and fitted to chowkats.

Dismantling boarding any size and description fixed in any position with nails.

S&F 20mm thick PVC boarding with nails as in cub board shelves in any situation planed one side with butt joints complete all as specified and as direcetd.

S&F for built in steel cup board with pressed steel frame of size 75 mm x 45 mm x 1.25mm thick with preseed steel shutter 1 mm thick Godreg pattern fixed to masonry wall by hold fast made out of 25x3 mm flat iron including ms hanging rod of 10 mm dia with bracket fixed on inner side of one leaf of shutter and on other leaf provision of ms peg set of 3 pegs including spray including locking arrangement painting with two coats of synthetic enamel paint over one coat of ref oxide primer with two coats of synthetic enamel paint over one coat of red oxide primer all around on steel surface of frame and shutter and making god disturbed portion in cm 1:3 or pcc 1:24 complete all as specified.

S&F 100 mm butt hinges medium weight cold rolled mild steel and fixed

S&F 150 mm long mild steel pressed handles oval type stove enamlled black

S&F 200 mm long mild Barrel tower bolt, oval type stove enamlled black with bright bolt and fixed

M & L preparing wood or wood based surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Taking down steel/wooden window/ventilator of any size and description complete.

S&F MS Box type steel windows (double shutter) with pressed steel frame (dimension 95 x 45 x 1.25mm ) with side hung shutters including box type hinges with steel handle and steel peg stay , complete with glazed openable shutter with glazing bars (outside shutters) and wire gauged openable shutter without glazing bars (inside shutters) , dovetailed or welded complete all as specified and directed and shown on Drg No TD/088 dt 07 Jan 2002. (i) Two shutter i.e. wire gauzed and glazed shall be fixed in one composite frame and both shutter shall be measured as one unit. (ii) Rate for filling of PCC frame deemed to be included in the quoted rate. (iii) MS grill, wire gauge and glass shall be measured and paid separately.

S&F steel ventilators , bottom portion fixed type glazing and top portion with top hung wire gauze shutter dovetailed or welded complete all as specified and directed.

M&L framed work such as grills grating etc with end of bars shoulderd and/or riveted .welded or forged into spikes.framedguard bars iron doors.ladders framed balusters , walk ways. Railings, frame work of of water tanks and ssimilar work conforming to Fe410

S&F 3 mm thick sheet glass, Ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane complete all as specified and as directed.

S& F galvanised mild steel wire clothes 0.56 mm nominal dia of wire and average width of aperture1.18 mm complete all as specified and as directed .

M&L applying 2 coats of synthetic enamel paints on new steel surfaces over a coat of red oxide primer including surface preparation over 10 cm width and girth complete.

Demolition of cement concrete (un reinforced) of any description and in any position not other specifically provided for

M&L for cement concrete (1:5:10) type E-2 as in foundation filling and mass concrete

M&L for preparation of sunken floor and applying a coat of hot bituminous primer @ .30 kg/sqm and applying a coat of industrial bitumen 85/25 @ 1.20 kg/sqm over primer and laying modified polymeric water proofing membrane(weight not less than 3 kg/sqm 2 mm thick consisting 100 mm micron HMHDE FILM ) and applying one coat of industrial btumen grade 85/25 @ 1.2 kg/sqm on top of membrane with 100 mm overlap at side end lap where required over 10 mm thick rendering in CM 1:4 including integral waterproofing compound 3% and taking down existing plastering as per manufacturer instruction and complete all as specified and directed

Removing existing water proofing treatment and preparing surfaces to the entire satisfaction of Engineer-in-Charge / GE including taking down existing plaster, cleaning of all foreign material such as grass, roots, dust etc and roughening the concrete surfaces by wire brushing and washing down to remove dust etc. flushing at junction of parapets complete and removing the same to the places where directed by Engineer-in-Charge

M&L for rendering 15mm thick on roof surfaces in CM 1:4 complete all as specified and direcetd.

M&L for preparation of roof surfaces, applying a coat of primer@ 0.40Kgs/sqm applying a coat of bitumen grade 85/25 @1.2kg/sqm supplying and laying water proofing treatment with using polymeric water proofing membrane (weight not less then 3kg/Sqm) consisting of 100 micron HMHDPE film centre core including applying a coat of bitumen 85/25 grade @ 1.2kg per sqm on top surface of membrane and torch application of membrane with 10cm overlap where required and finally finished with and including a coat of aluminium paint @0.20Ltr/Sqm as per manufacture instruction complete all as specified and directed.

Dismantling floor hearth or wall tilling including cement mortar bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises

M & L Glazed ceramic coloured tiles in vertical surface 350 mm x 250 mm x 7 mm/450 x 350 x 7mm thick set and jointed in neat cement slurry and pointed in white cement or colour cement including 10 mm thick in CM 1:4 complete all as specified and as directed.

M&L providing non- skid glazed ceramic tiles coloured7-8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but n xc 0.11 sqm, in floor etc set and joited with neat cement slurry and pointed in coloured cement to match coloured tiles including 15 mm thick cement screed bed in CM 1:6 complete all as specified and as directed.

M&L for Vitrified light shade coloured ceramic tiles 10mm thick (square/rectangular) polished area of each tile not exceeding 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for Vitrified light shade coloured ceramic tiles 10mm thick (square/rectangular) polished area of each tile not exceeding 0.36 Sqm in skirting/dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including 10mm thick screed bed in CM 1:4 complete all as specified and directed.

S&F in repair vitreous china squatting pan "Orissa" pattern size 580mmx440mm white with integral foot rests excluding flushing cictern and flush pipe all as specified and directed

S & F in Repair 10 ltrs capasity PVC valveless syphonic action type flushing cistern low level white , with inlet ball valve, float and handle including bracket and flush pipe of polyethylene of low or high density or PVC 32 mm dia for low level cistern complete all as specified and as directed.

Taking down old 110/75 mm bore PVC(SWR) pipes in any position

S&F 75 mm dia PVC (SWR) floor trap plain with greting incl jointing with solvent cement

S&F 75 mm bore PVC (SWR) pipes of single socketed in any length with rubber ring joints laid in trenches or in floors all as specified

S&F 75 mm bore PVC (SWR) pipes of single socketed in any length with rubber ring joints fixed to wall all as specified

S&F 75 mm bore. PVC (SWR) bends complete all as specified.

S&F 110mm bore.PVC(SWR) junction single (single T) equal or unequal with access door complete all as specified.

S&F 110 mm dia PVC (SWR) vent cowl complete all as specified.

S&F 110 mm PVC (SWR) bend any radius complete all as specified.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches all specified and directed

Taking up or down existing GI Tubing15 mm dia & connections including cleaning for refixing or removal to store all as specified and as directed

All as above ser No 59 herein before but 20 mm dia

S&F,16 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Refixing only GI tube 15mm dia medium grade will new fittings and fixed to wall, ceiling or laid in floor and ceiling and wall all as specified and dircted

S&F, GI tube 20 mm dia medium grade with all fittings and fixed to wall, ceiling or laid in floors.

Refixing only GI tube 20mm dia medium grade will new fittings and fixed to wall, ceiling or laid in floor and ceiling and wall all as specified and dircted

S&F Shelf of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 300 gms).

S&F in repairs sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs , washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm.

S&F (in repairs) Bib taps cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed for iron pipe or or brass ferrule for 15 mm bore of pipe complete all as specified and as directed..

S&F (in repairs) angle cock cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed both end for iron pipe or or brass ferrule for 15 mm bpre of pipe complete all as specified and as directed.

S&F (in repairs) Stop cock (Concealed) cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed both end for iron pipe or or brass ferrule with long shank and cup for 15 mm bpre of pipe complete all as specified and as directed.

S&F in repair swivel shower rose of brass Chromium plated for fixing with 15mm pipe fixed all as specified

Dismantling of existing water tanks capacity exc 500 ltr n exc 1000Lts and removing to store complete all as specified.

S&F rotational moulded polethylene water tank of 500 ltrs capacity triple layered (cylindrical vertical with closed top) hoisted and fixed in position all as pacific SSR Part- I

S&F 20mm ball valve high pressure of PTMT with epoxy coated aluminium rod and high denty plastic ball screwed for iron pipe and fixed (min wt. 210gms).

S&F 20 mm dia gun metal ,globe or gate valves , with iron wheel head , screwed both ends for iron pipe complete all as specified.

S&F in repair vitreous china wash basin white, flat, back, size 550x400 mm excluding tap waste but including brackets and including cutting for and pinioning in ends of brackets but exclusive of supply waste pipe all as specified

S&F in repairs 15mm bore pillar tap cast copper allloy with capstan head Chromium plated scwed down with or without letter Hot or Cold with long shank and fly nuts scrwed for iron pipe and fixed as specified and directed.

S&F in repairs floor door stopper of aluminium alloy body and tongue , anodised with hard drawn steel spring fixed in floor , overall length of cover plate 150mm.

Supply only 32mm dia wast fittings brass chromium plated for basin with long screwed shank and fly nuts, flange end bedded in red lead cement and other end fixed.

S&F in repair PVC connection 15mm bore length not less than 300 mm long with both ends PTMT nuts complete all as specified.

S & F in repairs 300 mm size mild steel ordinary rat rail rod pattern springs including roller and roller plate complete.

S&F in repair CP towel rail 20mm dia, 600 mm long between flanges complete all as specified.

Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in soft/loose soil for roads to required slope gradient, camber etc complete all as directed.

Removing excavated material exc.1.5KM n. exc. 5.0KM and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified.

M&L for hardcore of broken stone or boulders of gauge n exc 63 mm deposited spread and levelled in layers n exc 15 cm thick watere and rammed to a true surface complete all as specified.

M&L for sand filling under floors or in foundations including watering and consolidation of 75 mm thickness complete all as specified.

M&L 60mm thick, machine pressed precast concrete interlocking paver block, with grey cement and pigment, any shape and size confirming to IS 15658-2006, M-35 Grade complete all as specified and directed.

Providing precast cement concrete 1:2:4 Type B 1 (using 20 mm graded stone aggregate) in windows or door cills, lintels, bressumers, steps, quoins blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates etc. (of any section indicated) with plain fair faces,including chamfers, weatherings, throating etc. and setting in cement mortar 1:6 complete all as specified and directed.

Demolition of stone slab and tiles of any description or thickness in floor, aprons etc complete all as specified.

M&L for machine cut mirror polish kota stone slab flooring20-25mm thich over 15mm thick screed bed in CM 1:6 laid and jointed with grey cement slurry mixed with pigmen to match the shad of the slab including round nosing at corners rubbing and polishing complete

M&L for machine cut mirror polish kota stone slab 20-25mm thich in riser of step,skirting,dado and pillers over and including 15mm thick rendering in CM 1:4 including rubbing and polishing complete

M&L for granite (of any type) tiles 18-20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing types over 20mm thick screed bed in CM 1:6 complete.

M&L for 18-20 mm thick granite (of any type) tiles machine cut in skirting/dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over 15mm thick rendering in CM 1:4 complete all as specified..

Demolition of brick work in cement mortar incl all quoins, arches, pillars etc, but excluding ashler facings, dressed stonework and precast concrete articles complete all as specified.

S&F in repairs Stainless Steel plate rack of size 90x80x25cm made with 1.00 mm thick sheet including taking out existing wooden plat rack, complete all as specified.

M&L brick work with sub class B bricks burnt straight or curved on plan exc 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete.

M&L for RCC type B0 1:2:4(12.5 mm graded aggregate) in slabs supported on walls,beams and columns in floors,roofs,landings,balconies,canopies,deck slabs and in shelves complete all as specified and directed

M&L for 10mm dia and over mild steel TMT bars, cut to length , bent to shape required including cranking, bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips , quality of steel conforming to demormed or twisted bars Fe-410-W (Gde E-250).

M&L for brick work with sub class ‘B’ old size bricks straight or curved on plan to any radius as in half brick thick wall built in CM 1:4 complete all as specified and directed

Demolition of cement concrete (un reinforced) in ground floor for pavings n.exc 15cm thickness (below are above ground level) complete all as specified.

M&L 75 mm thick PCC 1:3:6 type C2 using( 40mm graded stone aggregate) as in plinth protection/foot path finishing cement concrete even and smooth with out using extra cement complete all as specified and as directed.

S&F fancy type curtain rails 25mm dia harisson rails, mild steel, chormium plated with fixing bracket, stops,rollers etc for hangging curtain rod complete all as specified and directed.

S&F in repair 600mmx450mm bevelled edges mirror consisting of 5.5mm thick commercial plywood and fixed to plug with chromium plated brass screwed and cup washer complete all as specified.

Dismantling corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S&F Sheet metal enclosure TPN distribution board vertical type double door with insulated bus bar arrangement IP 43 protection 4 way 415V complete all as specified .

Taking down of TPN DB all as specified.

S&F MCCB TPN 100 Amps 16 KA all as specified

Taking down faulty damaged unserviceable LT under ground cable of any size.

Supply and laying XLPE insulated, armoured, heavy duty electric cable with aluminium conductor, 1100V grade, cross-sectional area 25 sqmm 4 core complete all as specified .

Excavation in trenches n. exc 1.5 mtr wide and not exc 1.5 mtr in depth for laying underground LT XLPE cable and getting soft/loose soil complete.

M&L for Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil all as directed and specified.

M&L for removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point all as directed and specified by Engr-in-Charge.

M& L for sand filling under floors or in foundations including watering and consolidation all as specified and directed.

Supplying and laying un-reinforced precastconcrete cable cover, but Class LV, Type I, flat, size 250mm x 150mm x 40mm all as directed and specified by Engr-in-Charge.

Taking down carefully of point wiring (Light , fan, socket or power) complete (fittings such as switches, Ceiling roses, pendants, regulator, sockets etc to be measured separately) removing from site of work and making good to the disturbed surfaces of walls/floors etc all as directed

Taking down carefully old unserviceable fittings & Fixers of any type and any size.

Taking down carefully old unserviceable by unscrewing from DB box, MCB SP/SPN/TPN of any size & any capacity .

Taking down carefully old unserviceable sub main wiring of any size .

Concealed point wiring using approved colour coding as per IS ,with stranded copper conductor 1.5 sq mm(nominal area),single core,FRLSH,PVC insulated and unsheated cable 1100 volts grade,ISI 694, marked in and including heavy duty PVC concealed conduit medium grade ISI marked 20 mm dia with all fittings PVC junction boxes, etc. modular GI metal sunken/flush boxes of thickness not less than 1.2 mm of any modules from 2 to 18 modules with inner and outer modular cover plates, including FRLSH, rigid PVC insulated unsheated stranded copper conductor 1.5 sq mm (nominal area) single core cable as earth continuity conductor to common earth and connected to earth dolly complete all as specified, for the following Note:(i)Cutting/chasing of wall etc. deemed to be included in quoted rate of this item.(ii) Modular GI metl flush/sunken box along with modular base/front cover plate are inclusive in the item rate quoted(iii)Only switches sockets and fan regulators shall be measured and paid separately

(a). One light point controlled by one switch

(b). One fan point controlled by one switch

(c). One exhaust fan point controlled by one switch

(d). One 3-pin socket outlet 5 Amp on independent board.

(e). One 3 pin socket outlet 5 Amp on same board

(d). One light point controlled by two way switches

(f). One bell point controlled by one switch

All per Srl item No. 120 here-in-before, but with 2.5 Sqmm copper conductor cable complete all as specified for One 3 pin socket outlet 15 Amp on independent board.

Material and labour for two single core PVC Insulated unsheathed multi stranded FRLS copper conductor cable of size 6sqmm as sub main wiring including suitable size heavy duty rigid PVC conduit and of PVC insulated unsheathed multi stranded FRLS copper conductor cable of size 6 sqmm as an earth continuity conductor complete all as specified. Note : Two run of 6.00 sqmm copper cable, one run of 6.00 sqmm copper cable and one run of conduit shall be measured as one unit.

Material and labour for two single core PVC Insulated unsheathed multi stranded FRLS copper conductor cable of size 10 sqmm as sub main wiring including suitable size heavy duty rigid PVC conduit and of PVC insulated unsheathed multi stranded FRLS copper conductor cable of size10 sqmm as an earth continuity conductor complete all as specified. Note : Two run of 6.00 sqmm copper cable, one run of 6.00 sqmm copper cable and one run of conduit shall be measured as one unit.

Material and labour for two single core PVC Insulated unsheathed multi stranded FRLS copper conductor cable of size 4 sqmm as sub main wiring including suitable size heavy duty rigid PVC conduit and of PVC insulated unsheathed multi stranded FRLS copper conductor cable of size 4 sqmm as an earth continuity conductor complete all as specified. Note : Two run of 6.00 sqmm copper cable, one run of 6.00 sqmm copper cable and one run of conduit shall be measured as one unit.

S &F Modular switch polycarbonate SP one way 6 Amps complete all as specified and directed

Supply and fix in replacement two way modular switch 6 amps, 230 volts, complete all as specified .

S &F modular switch polycarbonate SP one way 16 Amps complete all as specified .

S&F modular bell push 6 amp single pole one way complete.

S&F modular socket out let 3 pin 6 amp multipurpose flash type.

S&F modular socket out let 5 pin 6/16 Amp multipurpose, flush type 240 volt complete.

S&F ceiling rose surface Bakelite 65 x 50 mm two to three terminals complete.

S&F bell ding dong type AC 230 volt single pole Complete.

S & F lamp holder insulated body surface bakelite with back plate suitable for angle / batten fittings fixed with wooden round blocks all as specified.

Supply and fixing LED bulb 9 watt include connection all as specified.

M & L for replacement of Step regulator electronic modular fan regulator flush type on the existing phenolic laminated sheet etc as required complete & all as specified.

Taking down Exhaust fan of any size and deposited to E/M storeyard for refixing, complete all as specified

M&L old exhaust re-winding of cupper binding with capacitor complete and re-fixing all as specified with Engr-in-charge.

Taking down fan of any size, sealing cable end, dismantling blades and removing fan and blades to store.

Painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc.

Hanging only ceiling fan of Any size removed against item no 22 and connecting up with hook including provision of cable from ceiling rose or connector to fan.

M&L old ceiling fan re-winding of cupper binding with capacitor complete all as specified with Engr-in-charge.

Supply and fix in replacement exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz,RPM 1200, Copper winding of sweep 250mm all as specified and directed.

Supply and fixing 240V, 10 KA 'B' curve miniaturecircuit breaker (MCB) of single poles and currentcarrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and as directed by Engr-In-Charge.

Supply and fixing 240V, 10 KA 'B' curve miniaturecircuit breaker (MCB) of single poles and currentcarrying capacity SPN 40 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and as directed by Engr-In-Charge.

Supply and fix in replacement MCB DB Single pole and neutral 8 way sheet steel phospetised powder painted with 200 amps rated bus bar with IP 43 protection 240 V nautral link, earth bar and Din rail double door complete all as specified and as direcrted .

S&F box type LED light fitting suitable for 4 ft 20 watt complete with all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size all as specified and as directed.

Taking down old unsv bldg security light fitting, Supply and fixing new LED bldg security light fitting 35 watts to be fixed to channel and as reqd to be mounting bracket in wall/floor to suit the opening of the fitting with FI clamp, nut, bolt and washers of suitable size including making connection complete all as specified.

Material and labour for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6mm thick, buried directly in ground, vertically to a depth not less than 2.25 mtr deep below ground level with top edge of the earth plate at depth not less than 1.5 mtr below ground level earth plate surrounded by 15 cm thick and packed layers of charcoal, dust and common salt, earth lead GI wire 4mm dia by means of bolts, nuts, check-nuts and washers of galvanized iron and thimbles and of earth wire protected by galvanized iron pipe light grade 15mm bore and water pipe 20 mm bore GI medium grade with funnel and wire mesh complete including excavation and earth work, PCC chamber and cover in cement concrete 1:3:6 type C-1 using 20 mm graded stone aggregate in lieu of CI cover and frame etc all as specified and shown in electrical plate No. 5 of SSR-2009 (Part-I including testing after completion.

Supply and fix decorative light fitting 1x9watt ceiling/wall mounted LED BULKHEAD luminaire with engineering plastic housing and top frame with opal PMMA diffuser.

S & F in replacement mirror LED light fitting 2 feet 10 watt with accessories complete all as specified and directed.

S & F PVC conduit with accessories 25 mm dia for drawing telephone/TV/internet wires complete all as specified and directed. Note :- ( only PVC conduit with accessories shall be measured and paid).

S & F for TV socket and including sunk cast iron 1.6 mm thick pressed steel terminal box and mounting of hylem sheet its necessary fittings and accessories all as specified.

Taking down existing energy meter by disconnecting clectric connection of any type ,any make ,any capacity in poly carbinate or sheet steel body, ISI marked ,50 Hz 240 volts AC single phase rating etc. all as specified.

Refixing existing energy meter by disconnecting clectric connection of any type ,any make ,any capacity in poly carbinate sheet steel body with door ISI marked ,50 Hz 240 volts AC single phase/Three phase rating etc. all as specified.

Excavating in post holes ( or similar hoels ) each n exc 0.5 cum getting out, returining, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm , watering, and removing surplus soil to a distance n exc 50 mtr in soft/loose soil

Excavation in trenches n.exc 1.5m deep & n.exc 1.5m wide and n. exc 10 sqm on plan, in soft/loose soil and getting out.

Returning filling in including spreading leveling, watering and well ramming in layers not exc 25 cm in soft/loose soil.

M&L cement concrete in foundation type C 2, 1:3:6 ( 40 mm gde stone aggregate) as in filling and mass concrete.

S&F rolled mild steel in joist , channel, angle or tie sections fixed independently without connecting plates etc (cut to ordinary length i.e. within 20 mm of the length indicated) as in posts and struts in fencing including cutting tops to shape as directed , drilling holes , notching for wire etc ,flat iron fillets ( for securing wire etc ) including all necessary drilling , bolting or riveting, etc and similar work , MS flat iron of any size etc complete.

S&F posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, wind ties, etc.; flat iron fillets ( for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E-165 complete all as directed.

Supply only mild steel screw bolts 5 to 10 mm dia (machine made) with hezagonal or square at one end and screwed the other ends and fitted with washers and one hezagonal or squre nut exc 5 cm but not 10 cm long

M&L Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire

Supply only chain link MS galvanised fencing, any size or type all as specified and as directed

Supply only mild steel round bars in available length of Fe-290 (Gde E-165)

M&L brick work with sub class' B' bricks of old size, straight or curved on plan exc 6 m mean radius built in cement mortar 1:4.

M & L rendering 10mm thick on brick wall or concrete surfaces in cement mortar 1:4 finished fair and even complete all as specified

S&F in repairs Galvanised 2 strand , steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rail straining bolts including securing or tying at crossings with and provisons of galvanised mild steel wire, staples or steel pins etc as directed (each line wire to be measured).

Demolition of RCC/wood jafri spaced one way including taking as under of battens in trellis complete all as specified and directed

Material and labour for providing and fixing Stainless steel (Grade 304) railing made of hollow tubes,channels,plates, chains, etc including welding,grinding,buffing,polishing and making curvature and fitting the same with necessary stainless steel nuts and bolts complete,including fixing the railing with necessary accessories & stainless steel dash fasteners,stainless steel bolts etc. of required size,on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed

M & L applying two coats of cement based paint on newly plastered or unplastered wall surface including preparation of surfaces, complete all as specified.

PRASHANT A TO Z TRADERS (BID ID -3416777)

M/S MANSI TRADERS (BID ID -3419576)

Tameer Enterprises (BID ID -3414958)

M/S CHAUHAN ELECTRIC WORKS (BID ID -3413484)

m/s udit constructions (BID ID -3422200)