Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹1.3 Craccepted-aoc | ₹1.3 Cr | accepted-aoc |
Tender Value
₹1.5 Cr
EMD Value
₹2.3 L
Closing Date
19 Dec 2025, 10:30 pmClosed
Cauvery Neeravari Nigam Limited
Guruprasad L M
08221226261
9845771068
Repairs and Development works to Inspection bunglow in Nugu Reservoir and Hullahalli and Construction of Compound wall
CNNL/2025-26/BD/WORK_INDENT4100
CNNL/2025-26/BD/WORK_INDENT4100
Open
Buildings
Two Tender Document System(Two Cover)
CNNL KC Div Nanjungud
9 documents required · 9 mandatory
Satisfactorily completed as prime contractor, at least one similar work such as Construction/Improvements/Repairs to Building works of value not less than Rs. 76.00 Lakhs at 2025-26 price level in the preceding last five years. Note:-Work done certificate issued by competent authority not below the rank of Executive Engineer should be furnished.Financial turnover & Work done of previous years indicated above shall be given a weightage of 10 % per year to bring them to the price level of 2025-26
Each bidder/firm/company/ should have executed in any one year of the last five years (2020-21 to 2024-25) the following minimum quantities of work during (80% of expected peak rate of construction for 4 to 5 critical items which account for more than 60% of the total cost of the work. 1). EWE / Embankment-802.00 Cum 2).Cement Concrete of all Grade-273.00 Cum 3).Steel-11.70 Tonne 4) Brick work/Block work- 545.00 Cum 5) Plastering- 1365.00 Sqm 6) All types of painting- 8536.00 sqm 7) Water proofing- 680.00 Sqm 8) BM/SDBC- 203.00 Cum 9).WBM / WMM-562.00 Cum NOTE:- The criteria above applies to the Individual bidder/Firm/company. Certificate regarding the same duly signed by an officer not below the rank of the Executive Engineer should be submitted along with the technical bid.
List of Key Minimum Technical personal required for the work are as under and should be enrolled in company/firm/company should Employment register and document should be uploaded. Civil Engineer-BE Civil / Diploma-1 No
Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under-Assessed available tender capacity (AXNX1.50-B) where A Maximum value of civil engineering works executed in any one year during the last five years (updated to 2025-26 price level) taking into account the completed as well as works in progress, N Number of years prescribed for completion of the works for which tenders are invited, i.e 0.50, B Value, at 2025-26 price level, of existing commitments and on-going works to be completed during the next 0.50 year
Liquid assets and /or availability of credit facilities of not less than Rs 45.00 Lakhs (Credit lines/ letter of credit/ certificates from nationalized/Scheduled banks for meeting the fund requirement etc., in the prescribed format (section 3 (1.11)) failing which tenders are liable for rejection.
To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e) 2020-21, 2021-22, 2022-23 2023-24 & 2024-25, a)Achieved in at least two financial years a minimum annual financial turnover (in all classes of civil engineering construction works only) of Rs. 302.00 Lakhs. Note-Annual Turnover certificate (should contain valid UDIN number) duly certified by Chartered Accountant along with audited balance sheets should be furnished.
Nill
NIL
NIL
NIL
NIL
NIL
Not applicable
NIl
NIL
₹3,780
₹2.3 L
19 Dec 2025
11 Dec 2025
20 Dec 2025
17 Dec 2025
16 Dec 2025
Repairs and Development works to Inspection bunglow in Nugu Reservoir and Hullahalli and Construction of Compound wall
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...
Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includi...
Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, prov...
Removing white wash or colour wash by steel brushing and / or scraping, sand papering and preparing wall surface smooth including repairs to scraches including cost of labour, material complete as per...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per th...
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 g/L of approved brand and manufacture, including applying additional c...
Finishing walls with textured exterior paint of required shade :Old work (Two coats on existing cement paint surface applied @ 3.28 l/10 m² including preparing the surface after thoroughly cleaning t...
Removing the old paint or polish from wood and / or wood based surface with paint remover of approved brand / manufacturer and making surface even including cost of materials, labour, complete as per ...
Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @0.75 L/10 m² of approved brand and manufacture to give an e...
Removing the old paint from steel and / or other metal surface with hand scraping and making surface even including cost of labour, complete as per specifications. complete as per the direction of eng...
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manufacture includ...
Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, lai...
Providing and laying to required line and slope roofing with semicorrugated ( Trafford ) asbestos cement sheet 6mm. thick fixed with galvanised iron J or L hooks, bolts and nuts 8mm. dia C.I plain and...
Polyurethane based Single Component for Existing Surface Providing and Applying PU based Elastomeric Liquid Applied PU Waterproofing Membrane single component, cold applied, water based acrylic PU dis...
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. ...
White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps complete as directed by engineer incharge of the work
Providing and fixing Towel rail 600mm length with hooks made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class a) economy complete as directed by e...
Providing and fixing Soap dish wired with 200mm width made of Stainless steel with all concealed fitting arrangements & all necessary accessories complete - Class a) Economy complete as directed by en...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular ...
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complet...
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal exp...
Providing and placing on terrace, polyethylene water storage tanks with manhole lid and suitable locking arrangements, making holes of suitable diameter for inlet, outlet and over flow pipes, includin...
Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5star rating and IS:374/19 and also comply with IS:1709/1984 with latest amendment, Rated voltage 220V/50Hz, Rated power upto 35W...
Supply and fixing Stepped Fan Regulator Two Module complete as directed by engineer incharge of the work
Providing and supplying Queen size 6ft x 5ft Soft PU foam 5 inch thick mattress of reputed make with better enhanced air circulation & breathability & sleeping comfort of size as per direction of engi...
Providing & supplying 100% Polyester machine wash capable Blanket 80x90inches with calm and light colors as per direction of Engineer in charge of work
Providing and supplying Pillow (Memory foam) with deep sleeping comfort of size upto 70cm x 40cm as per direction of Engineer in charge of work
Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge SS Door stopper 75mm complete as directed by engineer incharge of the work
Providing and fixing Three seater Sofa with cushion of size 7(L)x2.5(W) X2.75(H) ft made of upholstery fabric with seats fitted with padding, springs, webbing and as per direction of engineer in charg...
Providing and fixing Single seater Sofa with cushion of size 3(L)x2.5(W)X2.75(H) ft made of upholstery fabric with seats fitted with padding,springs, webbing and as per direction of engineer in charge
Providing & fixing of Tea table 900mm x 750mm 450mm with 12mm thick ethched tempered glass with bevelled drawing made out of BWP ply and out faces laminated with 4mm thick veneer or 1mm thick laminate...
Providing & fixing foldable ladder 1500mm height with aluminium body and fibre foot steps
Providing & fixing 100% Polyester Curtains with specification of regular wash as per direction of Engineer in charge
Providing & supplying Carpet/Mat of 800+ gsm with stain proof, flexible and super absorbent fibre of good quality as per direction of Engineer in charge
Toughened glass 12 mm thickness with hole complete as per direction of Engineer in charge
Supplying.TR split Air conditioners suitable for operation on A/C supply single phase 50Hz 230V with hermetically sealed compressor with air cooled condenser,motor capacitor and start run capacitors ,...
Providing and laying Cement concrete pavement with 1:2:4 for commercial & residential building floors, hardpaths, footpaths using 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size...
Supplying & fixing-flexible LED Strip Light.W Power consumption in 5ms length CCT6500 degreeK, CRI 70% efficacy 80 lumenperW, life 25000 burning hours and Compliance to IS10322/IEC60598, LM79&LM80.The...
Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyc...
Fabricating, supplying and erection of …Mtrs long hot dip Galvanized Octagonal pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements, inclu...
Supplying & fixing of Surface mounting type retrofittype-LED tube.W comprising of LED linear source with CCT6500 degreeK,CRI 70%.efficacy 80 lumenper W,life 25000 burning hours and Compliance to IS103...
Supply & fixing of modular switch and connected accessories on existing modular switch plate as per IS3854 and IS1293. 6 Amps one way switch complete as per direction of Engineer in charge
Supply & fixing of modular switch and connected accessories on existing modular switch plate as per IS3854 and IS1293.6 Amps 3way socket complete as per direction of Engineer in charge
Supply & fixing of modular switch and connected accessories on existing modular switch plate as per IS3854 and IS1293.6/16A Universal Socket complete as per direction of Engineer in charge
Supply & fixing of modular switch and connected accessories on existing modular switch plate as per IS3854 and IS1293.32 Amps DP Switch complete as per direction of Engineer in charge
Supply and fixing regular MCB distribution boards on wall/wood board / flush mounting using required clamps, bolts,nuts etc., with provision for fixing suitable type capacities MCB's single phase/3 ph...
Supply anf fixing of minature circuit breaker on existing MCB distribution boards using necxessary fixing materials and C type curve indicator ON/OF , energy cross-3 with short circuit breaking capaci...
Supplying and surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates. The box should be firmly/surface/flush mounted after due groove cutting in the Brick/CC wa...
Supply and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required no.s of machine screws, bolts nuts etc., completed on the existing met...
Supplying heavy gauge PVC conduit pipe 19/20 mm dia 2 mm thick confirming to IS 2509 with suitable size bends, junction boxes , adhesive paste etc., and fixing using inverted wood plugs in case of RCC...
Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS:8130-1984 and (Virgin) PVC insulation sheathed suitable for work...
Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS:8130-1984 and (Virgin) PVC insulation sheathed suitable for work...
Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS:8130-1984 and (Virgin) PVC insulation sheathed suitable for work...
Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5star rating and IS:374/19 and also comply with IS:1709/1984 with latest amendment, Rated voltage 220V/50Hz, Rated power upto 35W...
Supply and fixing Stepped Fan Regulator Two Module complete as per direction of Engineer in charge
Providing and fixing 11KV lightning arrestor 10KV 5KA LA polymeric type with ground disconnector…as per CSECOM Specifications etc complete as per direction of Engineer in charge
Supplying, erecting, testing & commissioning of 3KVA OFF-LINE UPS systems uitableforoperationon230V,50Hz,A/Csupply,withallaccessories complete and Excluding batteries and wiring complete as per direct...
Supplying.litres capacity vertical/horizontal type wall mounting Electrical water heater with 22SWG copper/SS sheet metal inner Container tinned inside Fiber body outside, filled with glass wool betwe...
Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and te...
Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and te...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates an...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5...
Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/we...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includi...
Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, ...
Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...
Scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material by Mechanical Means using Hydraulic excavator with in all lifts and lead complete as per directio...
Construction of unlined surface drain of average cross sectional area 0.4 m2 in ordinary rock to specified lines, grades, levels and dimensions as per approved design and Technical Specification. (Exc...
Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to mee...
Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Materia...
Providing and applying tack coat with RS-1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.30 kg/m2 on the prepared bituminous surface cleaned with mechanical broom Tack coat ...
Providing and laying Bituminous Macadam with 120 tph capacity hot mix plant batch type using crushed aggregates of specified grading premixed with bituminous binder VG-30 @ 3.3% by weight of mix, tran...
Providing and laying Semi Dense Bituminous Concrete with 40/60 TPH capacity hot mix plant batch type using crushed aggregates of specified grading premixed with bituminous binder VG-30 @ 5% by weight ...
Painting lines, dashes, arrows etc on roads in two coats on new work with ready mixed road marking paint conforming to IS:164:2015 on bituminous surface, including cleaning the surface of all dirt, du...
Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in M 15 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, ker...
Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2022 made of Class B Type IV retro reflective sheeting fixed over 2 mm thick aluminium sheeting vi...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
bid document-4100-kw-4.doc
Tender Document • 2.43 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].